Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull media updates from Mauro Carvalho Chehab:
 - a new jpeg codec driver for Samsung Exynos (jpeg-hw-exynos4)
 - a new dvb frontend for ds2103 chipset (m88ds2103)
 - a new sensor driver for Samsung S5K5BAF UXGA (s5k5baf)
 - new drivers for R-Car VSP1
 - a new radio driver: radio-raremono
 - a new tuner driver for ts2022 chipset (m88ts2022)
 - the analog part of em28xx is now a separate module that only
   load/runs if the device is not a pure digital TV device
 - added a staging driver for bcm2048 radio devices
 - the omap 2 video driver (omap24xx) was moved to staging.  This driver
   is for an old hardware and uses a deprecated Kernel internal API.  If
   nobody cares enough to fix it, it would be removed on a couple Kernel
   releases
 - the sn9c102 driver was moved to staging.  This driver was replaced by
   gspca, and disabled on some distros, as almost all devices are known
   to work properly with gspca.  It should be removed from kernel on a
   couple Kernel releases
 - lots of driver fixes, improvements and cleanups

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (421 commits)
  [media] media: v4l2-dev: fix video device index assignment
  [media] rc-core: reuse device numbers
  [media] em28xx-cards: properly initialize the device bitmap
  [media] Staging: media: Fix line length exceeding 80 characters in as102_drv.c
  [media] Staging: media: Fix line length exceeding 80 characters in as102_fe.c
  [media] Staging: media: Fix quoted string split across line in as102_fe.c
  [media] media: st-rc: Add reset support
  [media] m2m-deinterlace: fix allocated struct type
  [media] radio-usb-si4713: fix sparse non static symbol warnings
  [media] em28xx-audio: remove needless check before usb_free_coherent()
  [media] au0828: Fix sparse non static symbol warning
  Revert "[media] go7007-usb: only use go->dev after allocated"
  [media] em28xx-audio: provide an error code when URB submit fails
  [media] em28xx: fix check for audio only usb interfaces when changing the usb alternate setting
  [media] em28xx: fix usb alternate setting for analog and digital video endpoints > 0
  [media] em28xx: make 'em28xx_ctrl_ops' static
  em28xx-alsa: Fix error patch for init/fini
  [media] em28xx-audio: flush work at .fini
  [media] drxk: remove the option to load firmware asynchronously
  [media] em28xx: adjust period size at runtime
  ...

1 files changed, 102 insertions, 10 deletions

diff --git a/drivers/media/usb/em28xx/em28xx-dvb.c b/drivers/media/usb/em28xx/em28xx-dvb.c
index 344042bb845..a0a669e8136 100644
--- a/drivers/media/usb/em28xx/em28xx-dvb.c
+++ b/drivers/media/usb/em28xx/em28xx-dvb.c
@@ -51,10 +51,14 @@
 #include "a8293.h"
 #include "qt1010.h"
 #include "mb86a20s.h"
+#include "m88ds3103.h"
+#include "m88ts2022.h"
 
-MODULE_DESCRIPTION("driver for em28xx based DVB cards");
 MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@infradead.org>");
 MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION(DRIVER_DESC " - digital TV interface");
+MODULE_VERSION(EM28XX_VERSION);
+
 
 static unsigned int debug;
 module_param(debug, int, 0644);
@@ -87,6 +91,7 @@ struct em28xx_dvb {
 	struct semaphore      pll_mutex;
 	bool			dont_attach_fe1;
 	int			lna_gpio;
+	struct i2c_client	*i2c_client_tuner;
 };
 
 
@@ -198,7 +203,7 @@ static int em28xx_start_streaming(struct em28xx_dvb *dvb)
 		dvb_alt = dev->dvb_alt_isoc;
 	}
 
-	usb_set_interface(dev->udev, 0, dvb_alt);
+	usb_set_interface(dev->udev, dev->ifnum, dvb_alt);
 	rc = em28xx_set_mode(dev, EM28XX_DIGITAL_MODE);
 	if (rc < 0)
 		return rc;
@@ -271,7 +276,7 @@ static int em28xx_stop_feed(struct dvb_demux_feed *feed)
 static int em28xx_dvb_bus_ctrl(struct dvb_frontend *fe, int acquire)
 {
 	struct em28xx_i2c_bus *i2c_bus = fe->dvb->priv;
-        struct em28xx *dev = i2c_bus->dev;
+	struct em28xx *dev = i2c_bus->dev;
 
 	if (acquire)
 		return em28xx_set_mode(dev, EM28XX_DIGITAL_MODE);
@@ -370,7 +375,6 @@ static struct drxk_config terratec_h5_drxk = {
 	.no_i2c_bridge = 1,
 	.microcode_name = "dvb-usb-terratec-h5-drxk.fw",
 	.qam_demod_parameter_count = 2,
-	.load_firmware_sync = true,
 };
 
 static struct drxk_config hauppauge_930c_drxk = {
@@ -380,7 +384,6 @@ static struct drxk_config hauppauge_930c_drxk = {
 	.microcode_name = "dvb-usb-hauppauge-hvr930c-drxk.fw",
 	.chunk_size = 56,
 	.qam_demod_parameter_count = 2,
-	.load_firmware_sync = true,
 };
 
 static struct drxk_config terratec_htc_stick_drxk = {
@@ -394,7 +397,6 @@ static struct drxk_config terratec_htc_stick_drxk = {
 	.antenna_dvbt = true,
 	/* The windows driver uses the same. This will disable LNA. */
 	.antenna_gpio = 0x6,
-	.load_firmware_sync = true,
 };
 
 static struct drxk_config maxmedia_ub425_tc_drxk = {
@@ -403,7 +405,6 @@ static struct drxk_config maxmedia_ub425_tc_drxk = {
 	.no_i2c_bridge = 1,
 	.microcode_name = "dvb-demod-drxk-01.fw",
 	.chunk_size = 62,
-	.load_firmware_sync = true,
 	.qam_demod_parameter_count = 2,
 };
 
@@ -415,7 +416,6 @@ static struct drxk_config pctv_520e_drxk = {
 	.chunk_size = 58,
 	.antenna_dvbt = true, /* disable LNA */
 	.antenna_gpio = (1 << 2), /* disable LNA */
-	.load_firmware_sync = true,
 };
 
 static int drxk_gate_ctrl(struct dvb_frontend *fe, int enable)
@@ -808,6 +808,14 @@ static struct tda18271_config c3tech_duo_tda18271_config = {
 	.small_i2c = TDA18271_03_BYTE_CHUNK_INIT,
 };
 
+static const struct m88ds3103_config pctv_461e_m88ds3103_config = {
+	.i2c_addr = 0x68,
+	.clock = 27000000,
+	.i2c_wr_max = 33,
+	.clock_out = 0,
+	.ts_mode = M88DS3103_TS_PARALLEL_16,
+	.agc = 0x99,
+};
 
 /* ------------------------------------------------------------------ */
 
@@ -815,11 +823,16 @@ static int em28xx_attach_xc3028(u8 addr, struct em28xx *dev)
 {
 	struct dvb_frontend *fe;
 	struct xc2028_config cfg;
+	struct xc2028_ctrl ctl;
 
 	memset(&cfg, 0, sizeof(cfg));
 	cfg.i2c_adap  = &dev->i2c_adap[dev->def_i2c_bus];
 	cfg.i2c_addr  = addr;
 
+	memset(&ctl, 0, sizeof(ctl));
+	em28xx_setup_xc3028(dev, &ctl);
+	cfg.ctrl  = &ctl;
+
 	if (!dev->dvb->fe[0]) {
 		em28xx_errdev("/2: dvb frontend not attached. "
 				"Can't attach xc3028\n");
@@ -979,12 +992,18 @@ static int em28xx_dvb_init(struct em28xx *dev)
 	int result = 0, mfe_shared = 0;
 	struct em28xx_dvb *dvb;
 
+	if (dev->is_audio_only) {
+		/* Shouldn't initialize IR for this interface */
+		return 0;
+	}
+
 	if (!dev->board.has_dvb) {
 		/* This device does not support the extension */
-		printk(KERN_INFO "em28xx_dvb: This device does not support the extension\n");
 		return 0;
 	}
 
+	em28xx_info("Binding DVB extension\n");
+
 	dvb = kzalloc(sizeof(struct em28xx_dvb), GFP_KERNEL);
 
 	if (dvb == NULL) {
@@ -994,6 +1013,27 @@ static int em28xx_dvb_init(struct em28xx *dev)
 	dev->dvb = dvb;
 	dvb->fe[0] = dvb->fe[1] = NULL;
 
+	/* pre-allocate DVB usb transfer buffers */
+	if (dev->dvb_xfer_bulk) {
+		result = em28xx_alloc_urbs(dev, EM28XX_DIGITAL_MODE,
+					   dev->dvb_xfer_bulk,
+					   EM28XX_DVB_NUM_BUFS,
+					   512,
+					   EM28XX_DVB_BULK_PACKET_MULTIPLIER);
+	} else {
+		result = em28xx_alloc_urbs(dev, EM28XX_DIGITAL_MODE,
+					   dev->dvb_xfer_bulk,
+					   EM28XX_DVB_NUM_BUFS,
+					   dev->dvb_max_pkt_size_isoc,
+					   EM28XX_DVB_NUM_ISOC_PACKETS);
+	}
+	if (result) {
+		em28xx_errdev("em28xx_dvb: failed to pre-allocate USB transfer buffers for DVB.\n");
+		kfree(dvb);
+		dev->dvb = NULL;
+		return result;
+	}
+
 	mutex_lock(&dev->lock);
 	em28xx_set_mode(dev, EM28XX_DIGITAL_MODE);
 	/* init frontend */
@@ -1330,6 +1370,48 @@ static int em28xx_dvb_init(struct em28xx *dev)
 			goto out_free;
 		}
 		break;
+	case EM28178_BOARD_PCTV_461E:
+		{
+			/* demod I2C adapter */
+			struct i2c_adapter *i2c_adapter;
+			struct i2c_board_info info;
+			struct m88ts2022_config m88ts2022_config = {
+				.clock = 27000000,
+			};
+			memset(&info, 0, sizeof(struct i2c_board_info));
+
+			/* attach demod */
+			dvb->fe[0] = dvb_attach(m88ds3103_attach,
+					&pctv_461e_m88ds3103_config,
+					&dev->i2c_adap[dev->def_i2c_bus],
+					&i2c_adapter);
+			if (dvb->fe[0] == NULL) {
+				result = -ENODEV;
+				goto out_free;
+			}
+
+			/* attach tuner */
+			m88ts2022_config.fe = dvb->fe[0];
+			strlcpy(info.type, "m88ts2022", I2C_NAME_SIZE);
+			info.addr = 0x60;
+			info.platform_data = &m88ts2022_config;
+			request_module("m88ts2022");
+			dvb->i2c_client_tuner = i2c_new_device(i2c_adapter, &info);
+
+			/* delegate signal strength measurement to tuner */
+			dvb->fe[0]->ops.read_signal_strength =
+					dvb->fe[0]->ops.tuner_ops.get_rf_strength;
+
+			/* attach SEC */
+			if (!dvb_attach(a8293_attach, dvb->fe[0],
+					&dev->i2c_adap[dev->def_i2c_bus],
+					&em28xx_a8293_config)) {
+				dvb_frontend_detach(dvb->fe[0]);
+				result = -ENODEV;
+				goto out_free;
+			}
+		}
+		break;
 	default:
 		em28xx_errdev("/2: The frontend of your DVB/ATSC card"
 				" isn't supported yet\n");
@@ -1354,7 +1436,7 @@ static int em28xx_dvb_init(struct em28xx *dev)
 	/* MFE lock */
 	dvb->adapter.mfe_shared = mfe_shared;
 
-	em28xx_info("Successfully loaded em28xx-dvb\n");
+	em28xx_info("DVB extension successfully initialized\n");
 ret:
 	em28xx_set_mode(dev, EM28XX_SUSPEND);
 	mutex_unlock(&dev->lock);
@@ -1375,14 +1457,23 @@ static inline void prevent_sleep(struct dvb_frontend_ops *ops)
 
 static int em28xx_dvb_fini(struct em28xx *dev)
 {
+	if (dev->is_audio_only) {
+		/* Shouldn't initialize IR for this interface */
+		return 0;
+	}
+
 	if (!dev->board.has_dvb) {
 		/* This device does not support the extension */
 		return 0;
 	}
 
+	em28xx_info("Closing DVB extension");
+
 	if (dev->dvb) {
 		struct em28xx_dvb *dvb = dev->dvb;
 
+		em28xx_uninit_usb_xfer(dev, EM28XX_DIGITAL_MODE);
+
 		if (dev->disconnected) {
 			/* We cannot tell the device to sleep
 			 * once it has been unplugged. */
@@ -1392,6 +1483,7 @@ static int em28xx_dvb_fini(struct em28xx *dev)
 				prevent_sleep(&dvb->fe[1]->ops);
 		}
 
+		i2c_release_client(dvb->i2c_client_tuner);
 		em28xx_unregister_dvb(dvb);
 		kfree(dvb);
 		dev->dvb = NULL;