V4L/DVB (10568): bttv: dynamically allocate device data

The bttv driver had static array of structures for up to 16 possible bttv
devices, even though few users have more than one or two.  The structures
were quite large and this resulted in a huge BSS segment.

Change the driver to allocate the bttv device data dynamically, which
changes "struct bttv bttvs[BTTV_MAX]" to "struct bttv *bttvs[BTTV_MAX]".
It would be nice to get ride of "bttvs" entirely but there are some
complications with gpio access from the audio & mpeg drivers.

To help bttvs removal along anyway, I changed the open() methods use the
video device's drvdata to get the driver data instead of looking it up in
the bttvs array.  This is also more efficient.  Some WARN_ON()s are added
in cases the device node exists by the bttv device doesn't, which I don't
think should be possible.

The gpio access functions need to check if bttvs[card] is NULL now.  Though
calling them on a non-existent card in the first place is wrong, but hard
to solve given the fundamental problems in how the gpio access code works.

This patch reduces the bss size by 66560 bytes on ia32.  Overall change is a
reduction of 66398 bytes, as the WARN_ON()s add some 198 bytes.

Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

1 files changed, 14 insertions, 4 deletions

diff --git a/drivers/media/video/bt8xx/bttv-if.c b/drivers/media/video/bt8xx/bttv-if.c
index ecf07988cd3..a6a540dc9e4 100644
--- a/drivers/media/video/bt8xx/bttv-if.c
+++ b/drivers/media/video/bt8xx/bttv-if.c
@@ -47,7 +47,10 @@ struct pci_dev* bttv_get_pcidev(unsigned int card)
 {
 	if (card >= bttv_num)
 		return NULL;
-	return bttvs[card].c.pci;
+	if (!bttvs[card])
+		return NULL;
+
+	return bttvs[card]->c.pci;
 }
 
 
@@ -59,7 +62,10 @@ int bttv_gpio_enable(unsigned int card, unsigned long mask, unsigned long data)
 		return -EINVAL;
 	}
 
-	btv = &bttvs[card];
+	btv = bttvs[card];
+	if (!btv)
+		return -ENODEV;
+
 	gpio_inout(mask,data);
 	if (bttv_gpio)
 		bttv_gpio_tracking(btv,"extern enable");
@@ -74,7 +80,9 @@ int bttv_read_gpio(unsigned int card, unsigned long *data)
 		return -EINVAL;
 	}
 
-	btv = &bttvs[card];
+	btv = bttvs[card];
+	if (!btv)
+		return -ENODEV;
 
 	if(btv->shutdown) {
 		return -ENODEV;
@@ -94,7 +102,9 @@ int bttv_write_gpio(unsigned int card, unsigned long mask, unsigned long data)
 		return -EINVAL;
 	}
 
-	btv = &bttvs[card];
+	btv = bttvs[card];
+	if (!btv)
+		return -ENODEV;
 
 /* prior setting BT848_GPIO_REG_INP is (probably) not needed
    because direct input is set on init */