V4L/DVB (8913): cx18: Create cx18_ specific wrappers for all pci mmio accessesors.

cx18: Create cx18_ specific wrappers for all pci mmio accessesors.  This is a
first step in instrumenting all CX23418 PCI bus IO, to debug problems with
accessing the CX23418's PCI memory mapped IO.

Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

1 files changed, 69 insertions, 0 deletions

diff --git a/drivers/media/video/cx18/cx18-io.h b/drivers/media/video/cx18/cx18-io.h
new file mode 100644
index 00000000000..7c08c0add49
--- /dev/null
+++ b/drivers/media/video/cx18/cx18-io.h
@@ -0,0 +1,69 @@
+/*
+ *  cx18 driver PCI memory mapped IO access routines
+ *
+ *  Copyright (C) 2007  Hans Verkuil <hverkuil@xs4all.nl>
+ *  Copyright (C) 2008  Andy Walls <awalls@radix.net>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
+ *  02111-1307  USA
+ */
+
+#ifndef CX18_IO_H
+#define CX18_IO_H
+
+#include "cx18-driver.h"
+
+/* This is a PCI post thing, where if the pci register is not read, then
+   the write doesn't always take effect right away. By reading back the
+   register any pending PCI writes will be performed (in order), and so
+   you can be sure that the writes are guaranteed to be done.
+
+   Rarely needed, only in some timing sensitive cases.
+   Apparently if this is not done some motherboards seem
+   to kill the firmware and get into the broken state until computer is
+   rebooted. */
+u32 cx18_write_sync(struct cx18 *cx, u32 val, void __iomem *addr);
+
+void cx18_writel(struct cx18 *cx, u32 val, void __iomem *addr);
+u32 cx18_readl(struct cx18 *cx, const void __iomem *addr);
+
+/* No endiannes conversion calls */
+void cx18_raw_writel(struct cx18 *cx, u32 val, void __iomem *addr);
+u32 cx18_raw_readl(struct cx18 *cx, const void __iomem *addr);
+
+/* Access "register" region of CX23418 memory mapped I/O */
+u32 cx18_read_reg(struct cx18 *cx, u32 reg);
+void cx18_write_reg(struct cx18 *cx, u32 val, u32 reg);
+u32 cx18_write_reg_sync(struct cx18 *cx, u32 val, u32 reg);
+
+/* Access "encoder memory" region of CX23418 memory mapped I/O */
+u32 cx18_read_enc(struct cx18 *cx, u32 addr);
+void cx18_write_enc(struct cx18 *cx, u32 val, u32 addr);
+u32 cx18_write_enc_sync(struct cx18 *cx, u32 val, u32 addr);
+
+void cx18_memcpy_fromio(struct cx18 *cx, void *to,
+			const void __iomem *from, unsigned int len);
+void cx18_memset_io(struct cx18 *cx, void __iomem *addr, int val, size_t count);
+
+void cx18_sw1_irq_enable(struct cx18 *cx, u32 val);
+void cx18_sw1_irq_disable(struct cx18 *cx, u32 val);
+void cx18_sw2_irq_enable(struct cx18 *cx, u32 val);
+void cx18_sw2_irq_disable(struct cx18 *cx, u32 val);
+void cx18_setup_page(struct cx18 *cx, u32 addr);
+
+/* Tries to recover from the CX23418 responding improperly on the PCI bus */
+int cx18_pci_try_recover(struct cx18 *cx);
+
+#endif /* CX18_IO_H */