Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (95 commits)
  V4L/DVB (9296): Patch to remove warning message during cx88-dvb compilation
  V4L/DVB (9294): gspca: Add a stop sequence in t613.
  V4L/DVB (9293): gspca: Separate and fix the sensor dependant sequences in t613.
  V4L/DVB (9292): gspca: Call the control setting functions at init time in t613.
  V4L/DVB (9291): gspca: Do not set the white balance temperature by default in t613.
  V4L/DVB (9290): gspca: Adjust the sensor init sequences in t613.
  V4L/DVB (9289): gspca: Other sensor identified as om6802 in t613.
  V4L/DVB (9288): gspca: Write to the USB device and not USB interface in t613.
  V4L/DVB (9287): gspca: Change the name of the multi bytes write function in t613.
  V4L/DVB (9286): gspca: Compilation problem of gspca.c and the kernel version.
  V4L/DVB (9283): Correct typo and enable setting the gain on the mt9m111 sensor
  V4L/DVB (9282): Properly iterate the urbs when destroying them.
  V4L/DVB (9281): gspca: Add hflip and vflip to the po1030 sensor
  V4L/DVB (9280): gspca: Use the gspca debug macros
  V4L/DVB (9279): gspca: Correct some copyright headers
  V4L/DVB (9278): gspca: Remove the m5602_debug variable
  V4L/DVB (9277): gspca: propagate an error in m5602_start_transfer()
  V4L/DVB (9276): videobuf-dvb: two functions are now static
  V4L/DVB (9275): dvb: input data pointer of cx24116_writeregN() should be const
  V4L/DVB (9274): Remove spurious messages and turn into debug.
  ...

1 files changed, 89 insertions, 63 deletions

diff --git a/drivers/media/video/cx23885/cx23885-cards.c b/drivers/media/video/cx23885/cx23885-cards.c
index 2cda15f829f..dac5ccc9ba7 100644
--- a/drivers/media/video/cx23885/cx23885-cards.c
+++ b/drivers/media/video/cx23885/cx23885-cards.c
@@ -39,16 +39,16 @@ struct cx23885_board cx23885_boards[] = {
 		.input          = {{
 			.type   = CX23885_VMUX_COMPOSITE1,
 			.vmux   = 0,
-		},{
+		}, {
 			.type   = CX23885_VMUX_COMPOSITE2,
 			.vmux   = 1,
-		},{
+		}, {
 			.type   = CX23885_VMUX_COMPOSITE3,
 			.vmux   = 2,
-		},{
+		}, {
 			.type   = CX23885_VMUX_COMPOSITE4,
 			.vmux   = 3,
-		}},
+		} },
 	},
 	[CX23885_BOARD_HAUPPAUGE_HVR1800lp] = {
 		.name		= "Hauppauge WinTV-HVR1800lp",
@@ -57,19 +57,19 @@ struct cx23885_board cx23885_boards[] = {
 			.type   = CX23885_VMUX_TELEVISION,
 			.vmux   = 0,
 			.gpio0  = 0xff00,
-		},{
+		}, {
 			.type   = CX23885_VMUX_DEBUG,
 			.vmux   = 0,
 			.gpio0  = 0xff01,
-		},{
+		}, {
 			.type   = CX23885_VMUX_COMPOSITE1,
 			.vmux   = 1,
 			.gpio0  = 0xff02,
-		},{
+		}, {
 			.type   = CX23885_VMUX_SVIDEO,
 			.vmux   = 2,
 			.gpio0  = 0xff02,
-		}},
+		} },
 	},
 	[CX23885_BOARD_HAUPPAUGE_HVR1800] = {
 		.name		= "Hauppauge WinTV-HVR1800",
@@ -84,20 +84,20 @@ struct cx23885_board cx23885_boards[] = {
 					CX25840_VIN5_CH2 |
 					CX25840_VIN2_CH1,
 			.gpio0  = 0,
-		},{
+		}, {
 			.type   = CX23885_VMUX_COMPOSITE1,
 			.vmux   =	CX25840_VIN7_CH3 |
 					CX25840_VIN4_CH2 |
 					CX25840_VIN6_CH1,
 			.gpio0  = 0,
-		},{
+		}, {
 			.type   = CX23885_VMUX_SVIDEO,
 			.vmux   =	CX25840_VIN7_CH3 |
 					CX25840_VIN4_CH2 |
 					CX25840_VIN8_CH1 |
 					CX25840_SVIDEO_ON,
 			.gpio0  = 0,
-		}},
+		} },
 	},
 	[CX23885_BOARD_HAUPPAUGE_HVR1250] = {
 		.name		= "Hauppauge WinTV-HVR1250",
@@ -106,19 +106,19 @@ struct cx23885_board cx23885_boards[] = {
 			.type   = CX23885_VMUX_TELEVISION,
 			.vmux   = 0,
 			.gpio0  = 0xff00,
-		},{
+		}, {
 			.type   = CX23885_VMUX_DEBUG,
 			.vmux   = 0,
 			.gpio0  = 0xff01,
-		},{
+		}, {
 			.type   = CX23885_VMUX_COMPOSITE1,
 			.vmux   = 1,
 			.gpio0  = 0xff02,
-		},{
+		}, {
 			.type   = CX23885_VMUX_SVIDEO,
 			.vmux   = 2,
 			.gpio0  = 0xff02,
-		}},
+		} },
 	},
 	[CX23885_BOARD_DVICO_FUSIONHDTV_5_EXP] = {
 		.name		= "DViCO FusionHDTV5 Express",
@@ -169,43 +169,43 @@ struct cx23885_subid cx23885_subids[] = {
 		.subvendor = 0x0070,
 		.subdevice = 0x3400,
 		.card      = CX23885_BOARD_UNKNOWN,
-	},{
+	}, {
 		.subvendor = 0x0070,
 		.subdevice = 0x7600,
 		.card      = CX23885_BOARD_HAUPPAUGE_HVR1800lp,
-	},{
+	}, {
 		.subvendor = 0x0070,
 		.subdevice = 0x7800,
 		.card      = CX23885_BOARD_HAUPPAUGE_HVR1800,
-	},{
+	}, {
 		.subvendor = 0x0070,
 		.subdevice = 0x7801,
 		.card      = CX23885_BOARD_HAUPPAUGE_HVR1800,
-	},{
+	}, {
 		.subvendor = 0x0070,
 		.subdevice = 0x7809,
 		.card      = CX23885_BOARD_HAUPPAUGE_HVR1800,
-	},{
+	}, {
 		.subvendor = 0x0070,
 		.subdevice = 0x7911,
 		.card      = CX23885_BOARD_HAUPPAUGE_HVR1250,
-	},{
+	}, {
 		.subvendor = 0x18ac,
 		.subdevice = 0xd500,
 		.card      = CX23885_BOARD_DVICO_FUSIONHDTV_5_EXP,
-	},{
+	}, {
 		.subvendor = 0x0070,
 		.subdevice = 0x7790,
 		.card      = CX23885_BOARD_HAUPPAUGE_HVR1500Q,
-	},{
+	}, {
 		.subvendor = 0x0070,
 		.subdevice = 0x7797,
 		.card      = CX23885_BOARD_HAUPPAUGE_HVR1500Q,
-	},{
+	}, {
 		.subvendor = 0x0070,
 		.subdevice = 0x7710,
 		.card      = CX23885_BOARD_HAUPPAUGE_HVR1500,
-	},{
+	}, {
 		.subvendor = 0x0070,
 		.subdevice = 0x7717,
 		.card      = CX23885_BOARD_HAUPPAUGE_HVR1500,
@@ -225,11 +225,11 @@ struct cx23885_subid cx23885_subids[] = {
 		.subvendor = 0x0070,
 		.subdevice = 0x8010,
 		.card      = CX23885_BOARD_HAUPPAUGE_HVR1400,
-	},{
+	}, {
 		.subvendor = 0x18ac,
 		.subdevice = 0xd618,
 		.card      = CX23885_BOARD_DVICO_FUSIONHDTV_7_DUAL_EXP,
-	},{
+	}, {
 		.subvendor = 0x18ac,
 		.subdevice = 0xdb78,
 		.card      = CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP,
@@ -247,23 +247,25 @@ void cx23885_card_list(struct cx23885_dev *dev)
 
 	if (0 == dev->pci->subsystem_vendor &&
 	    0 == dev->pci->subsystem_device) {
-		printk("%s: Your board has no valid PCIe Subsystem ID and thus can't\n"
-		       "%s: be autodetected.  Please pass card=<n> insmod option to\n"
-		       "%s: workaround that.  Redirect complaints to the vendor of\n"
-		       "%s: the TV card.  Best regards,\n"
+		printk(KERN_INFO
+			"%s: Board has no valid PCIe Subsystem ID and can't\n"
+		       "%s: be autodetected. Pass card=<n> insmod option\n"
+		       "%s: to workaround that. Redirect complaints to the\n"
+		       "%s: vendor of the TV card.  Best regards,\n"
 		       "%s:         -- tux\n",
 		       dev->name, dev->name, dev->name, dev->name, dev->name);
 	} else {
-		printk("%s: Your board isn't known (yet) to the driver.  You can\n"
-		       "%s: try to pick one of the existing card configs via\n"
+		printk(KERN_INFO
+			"%s: Your board isn't known (yet) to the driver.\n"
+		       "%s: Try to pick one of the existing card configs via\n"
 		       "%s: card=<n> insmod option.  Updating to the latest\n"
 		       "%s: version might help as well.\n",
 		       dev->name, dev->name, dev->name, dev->name);
 	}
-	printk("%s: Here is a list of valid choices for the card=<n> insmod option:\n",
+	printk(KERN_INFO "%s: Here is a list of valid choices for the card=<n> insmod option:\n",
 	       dev->name);
 	for (i = 0; i < cx23885_bcount; i++)
-		printk("%s:    card=%d -> %s\n",
+		printk(KERN_INFO "%s:    card=%d -> %s\n",
 		       dev->name, i, cx23885_boards[i].name);
 }
 
@@ -271,11 +273,11 @@ static void hauppauge_eeprom(struct cx23885_dev *dev, u8 *eeprom_data)
 {
 	struct tveeprom tv;
 
-	tveeprom_hauppauge_analog(&dev->i2c_bus[0].i2c_client, &tv, eeprom_data);
+	tveeprom_hauppauge_analog(&dev->i2c_bus[0].i2c_client, &tv,
+		eeprom_data);
 
 	/* Make sure we support the board model */
-	switch (tv.model)
-	{
+	switch (tv.model) {
 	case 71009:
 		/* WinTV-HVR1200 (PCIe, Retail, full height)
 		 * DVB-T and basic analog */
@@ -303,21 +305,51 @@ static void hauppauge_eeprom(struct cx23885_dev *dev, u8 *eeprom_data)
 	case 71999:
 		/* WinTV-HVR1200 (PCIe, OEM, full height)
 		 * DVB-T and basic analog */
-	case 76601: /* WinTV-HVR1800lp (PCIe, Retail, No IR, Dual channel ATSC and MPEG2 HW Encoder */
-	case 77001: /* WinTV-HVR1500 (Express Card, OEM, No IR, ATSC and Basic analog */
-	case 77011: /* WinTV-HVR1500 (Express Card, Retail, No IR, ATSC and Basic analog */
-	case 77041: /* WinTV-HVR1500Q (Express Card, OEM, No IR, ATSC/QAM and Basic analog */
-	case 77051: /* WinTV-HVR1500Q (Express Card, Retail, No IR, ATSC/QAM and Basic analog */
-	case 78011: /* WinTV-HVR1800 (PCIe, Retail, 3.5mm in, IR, No FM, Dual channel ATSC and MPEG2 HW Encoder */
-	case 78501: /* WinTV-HVR1800 (PCIe, OEM, RCA in, No IR, FM, Dual channel ATSC and MPEG2 HW Encoder */
-	case 78521: /* WinTV-HVR1800 (PCIe, OEM, RCA in, No IR, FM, Dual channel ATSC and MPEG2 HW Encoder */
-	case 78531: /* WinTV-HVR1800 (PCIe, OEM, RCA in, No IR, No FM, Dual channel ATSC and MPEG2 HW Encoder */
-	case 78631: /* WinTV-HVR1800 (PCIe, OEM, No IR, No FM, Dual channel ATSC and MPEG2 HW Encoder */
-	case 79001: /* WinTV-HVR1250 (PCIe, Retail, IR, full height, ATSC and Basic analog */
-	case 79101: /* WinTV-HVR1250 (PCIe, Retail, IR, half height, ATSC and Basic analog */
-	case 79561: /* WinTV-HVR1250 (PCIe, OEM, No IR, half height, ATSC and Basic analog */
-	case 79571: /* WinTV-HVR1250 (PCIe, OEM, No IR, full height, ATSC and Basic analog */
-	case 79671: /* WinTV-HVR1250 (PCIe, OEM, No IR, half height, ATSC and Basic analog */
+	case 76601:
+		/* WinTV-HVR1800lp (PCIe, Retail, No IR, Dual
+			channel ATSC and MPEG2 HW Encoder */
+	case 77001:
+		/* WinTV-HVR1500 (Express Card, OEM, No IR, ATSC
+			and Basic analog */
+	case 77011:
+		/* WinTV-HVR1500 (Express Card, Retail, No IR, ATSC
+			and Basic analog */
+	case 77041:
+		/* WinTV-HVR1500Q (Express Card, OEM, No IR, ATSC/QAM
+			and Basic analog */
+	case 77051:
+		/* WinTV-HVR1500Q (Express Card, Retail, No IR, ATSC/QAM
+			and Basic analog */
+	case 78011:
+		/* WinTV-HVR1800 (PCIe, Retail, 3.5mm in, IR, No FM,
+			Dual channel ATSC and MPEG2 HW Encoder */
+	case 78501:
+		/* WinTV-HVR1800 (PCIe, OEM, RCA in, No IR, FM,
+			Dual channel ATSC and MPEG2 HW Encoder */
+	case 78521:
+		/* WinTV-HVR1800 (PCIe, OEM, RCA in, No IR, FM,
+			Dual channel ATSC and MPEG2 HW Encoder */
+	case 78531:
+		/* WinTV-HVR1800 (PCIe, OEM, RCA in, No IR, No FM,
+			Dual channel ATSC and MPEG2 HW Encoder */
+	case 78631:
+		/* WinTV-HVR1800 (PCIe, OEM, No IR, No FM,
+			Dual channel ATSC and MPEG2 HW Encoder */
+	case 79001:
+		/* WinTV-HVR1250 (PCIe, Retail, IR, full height,
+			ATSC and Basic analog */
+	case 79101:
+		/* WinTV-HVR1250 (PCIe, Retail, IR, half height,
+			ATSC and Basic analog */
+	case 79561:
+		/* WinTV-HVR1250 (PCIe, OEM, No IR, half height,
+			ATSC and Basic analog */
+	case 79571:
+		/* WinTV-HVR1250 (PCIe, OEM, No IR, full height,
+		 ATSC and Basic analog */
+	case 79671:
+		/* WinTV-HVR1250 (PCIe, OEM, No IR, half height,
+			ATSC and Basic analog */
 	case 80019:
 		/* WinTV-HVR1400 (Express Card, Retail, IR,
 		 * DVB-T and Basic analog */
@@ -329,7 +361,8 @@ static void hauppauge_eeprom(struct cx23885_dev *dev, u8 *eeprom_data)
 		 * DVB-T and MPEG2 HW Encoder */
 		break;
 	default:
-		printk("%s: warning: unknown hauppauge model #%d\n", dev->name, tv.model);
+		printk(KERN_WARNING "%s: warning: unknown hauppauge model #%d\n",
+			dev->name, tv.model);
 		break;
 	}
 
@@ -352,7 +385,7 @@ int cx23885_tuner_callback(void *priv, int component, int command, int arg)
 		return -EINVAL;
 	}
 
-	switch(dev->board) {
+	switch (dev->board) {
 	case CX23885_BOARD_HAUPPAUGE_HVR1400:
 	case CX23885_BOARD_HAUPPAUGE_HVR1500:
 	case CX23885_BOARD_HAUPPAUGE_HVR1500Q:
@@ -383,7 +416,7 @@ int cx23885_tuner_callback(void *priv, int component, int command, int arg)
 
 void cx23885_gpio_setup(struct cx23885_dev *dev)
 {
-	switch(dev->board) {
+	switch (dev->board) {
 	case CX23885_BOARD_HAUPPAUGE_HVR1250:
 		/* GPIO-0 cx24227 demodulator reset */
 		cx_set(GP0_IO, 0x00010001); /* Bring the part out of reset */
@@ -617,10 +650,3 @@ void cx23885_card_setup(struct cx23885_dev *dev)
 }
 
 /* ------------------------------------------------------------------ */
-
-/*
- * Local variables:
- * c-basic-offset: 8
- * End:
- * kate: eol "unix"; indent-width 3; remove-trailing-space on; replace-trailing-space-save on; tab-width 8; replace-tabs off; space-indent off; mixed-indent off
- */