Merge branch 'tracing/core' into tracing/hw-breakpoints

Conflicts:
	arch/Kconfig
	kernel/trace/trace.h

Merge reason: resolve the conflicts, plus adopt to the new
              ring-buffer APIs.

Signed-off-by: Ingo Molnar <mingo@elte.hu>

1 files changed, 59 insertions, 4 deletions

diff --git a/drivers/media/video/cx23885/cx23885-dvb.c b/drivers/media/video/cx23885/cx23885-dvb.c
index e236df23370..86ac529e62b 100644
--- a/drivers/media/video/cx23885/cx23885-dvb.c
+++ b/drivers/media/video/cx23885/cx23885-dvb.c
@@ -45,6 +45,7 @@
 #include "dibx000_common.h"
 #include "zl10353.h"
 #include "stv0900.h"
+#include "stv0900_reg.h"
 #include "stv6110.h"
 #include "lnbh24.h"
 #include "cx24116.h"
@@ -242,12 +243,22 @@ static struct tda18271_std_map hauppauge_tda18271_std_map = {
 		      .if_lvl = 6, .rfagc_top = 0x37 },
 };
 
+static struct tda18271_std_map hauppauge_hvr1200_tda18271_std_map = {
+	.dvbt_6   = { .if_freq = 3300, .agc_mode = 3, .std = 4,
+		      .if_lvl = 1, .rfagc_top = 0x37, },
+	.dvbt_7   = { .if_freq = 3800, .agc_mode = 3, .std = 5,
+		      .if_lvl = 1, .rfagc_top = 0x37, },
+	.dvbt_8   = { .if_freq = 4300, .agc_mode = 3, .std = 6,
+		      .if_lvl = 1, .rfagc_top = 0x37, },
+};
+
 static struct tda18271_config hauppauge_tda18271_config = {
 	.std_map = &hauppauge_tda18271_std_map,
 	.gate    = TDA18271_GATE_ANALOG,
 };
 
 static struct tda18271_config hauppauge_hvr1200_tuner_config = {
+	.std_map = &hauppauge_hvr1200_tda18271_std_map,
 	.gate    = TDA18271_GATE_ANALOG,
 };
 
@@ -370,13 +381,25 @@ static struct zl10353_config dvico_fusionhdtv_xc3028 = {
 	.disable_i2c_gate_ctrl = 1,
 };
 
+static struct stv0900_reg stv0900_ts_regs[] = {
+	{ R0900_TSGENERAL, 0x00 },
+	{ R0900_P1_TSSPEED, 0x40 },
+	{ R0900_P2_TSSPEED, 0x40 },
+	{ R0900_P1_TSCFGM, 0xc0 },
+	{ R0900_P2_TSCFGM, 0xc0 },
+	{ R0900_P1_TSCFGH, 0xe0 },
+	{ R0900_P2_TSCFGH, 0xe0 },
+	{ R0900_P1_TSCFGL, 0x20 },
+	{ R0900_P2_TSCFGL, 0x20 },
+	{ 0xffff, 0xff }, /* terminate */
+};
+
 static struct stv0900_config netup_stv0900_config = {
 	.demod_address = 0x68,
 	.xtal = 27000000,
 	.clkmode = 3,/* 0-CLKI, 2-XTALI, else AUTO */
 	.diseqc_mode = 2,/* 2/3 PWM */
-	.path1_mode = 2,/*Serial continues clock */
-	.path2_mode = 2,/*Serial continues clock */
+	.ts_config_regs = stv0900_ts_regs,
 	.tun1_maddress = 0,/* 0x60 */
 	.tun2_maddress = 3,/* 0x63 */
 	.tun1_adc = 1,/* 1 Vpp */
@@ -440,6 +463,30 @@ static struct xc5000_config mygica_x8506_xc5000_config = {
 	.if_khz = 5380,
 };
 
+static int cx23885_dvb_set_frontend(struct dvb_frontend *fe,
+				    struct dvb_frontend_parameters *param)
+{
+	struct cx23885_tsport *port = fe->dvb->priv;
+	struct cx23885_dev *dev = port->dev;
+
+	switch (dev->board) {
+	case CX23885_BOARD_HAUPPAUGE_HVR1275:
+		switch (param->u.vsb.modulation) {
+		case VSB_8:
+			cx23885_gpio_clear(dev, GPIO_5);
+			break;
+		case QAM_64:
+		case QAM_256:
+		default:
+			cx23885_gpio_set(dev, GPIO_5);
+			break;
+		}
+		break;
+	}
+	return (port->set_frontend_save) ?
+		port->set_frontend_save(fe, param) : -ENODEV;
+}
+
 static int dvb_register(struct cx23885_tsport *port)
 {
 	struct cx23885_dev *dev = port->dev;
@@ -479,6 +526,12 @@ static int dvb_register(struct cx23885_tsport *port)
 				   0x60, &dev->i2c_bus[1].i2c_adap,
 				   &hauppauge_hvr127x_config);
 		}
+
+		/* FIXME: temporary hack */
+		/* define bridge override to set_frontend */
+		port->set_frontend_save = fe0->dvb.frontend->ops.set_frontend;
+		fe0->dvb.frontend->ops.set_frontend = cx23885_dvb_set_frontend;
+
 		break;
 	case CX23885_BOARD_HAUPPAUGE_HVR1255:
 		i2c_bus = &dev->i2c_bus[0];
@@ -736,7 +789,8 @@ static int dvb_register(struct cx23885_tsport *port)
 					if (!dvb_attach(lnbh24_attach,
 							fe0->dvb.frontend,
 							&i2c_bus->i2c_adap,
-							LNBH24_PCL, 0, 0x09))
+							LNBH24_PCL,
+							LNBH24_TTX, 0x09))
 						printk(KERN_ERR
 							"No LNBH24 found!\n");
 
@@ -756,7 +810,8 @@ static int dvb_register(struct cx23885_tsport *port)
 					if (!dvb_attach(lnbh24_attach,
 							fe0->dvb.frontend,
 							&i2c_bus->i2c_adap,
-							LNBH24_PCL, 0, 0x0a))
+							LNBH24_PCL,
+							LNBH24_TTX, 0x0a))
 						printk(KERN_ERR
 							"No LNBH24 found!\n");