V4L/DVB (8807): Add DVB support for the Leadtek Winfast PxDVR3200 H

This patch is on behalf of Stephen Backway <stev391@email.com>, and
represents two patches I received (and some subsequent whitespace
cleanup I had due to how I pulled the patches).

From the original author:

a) Add DVB support for the Leadtek Winfast PxDVR3200 H.

b) The tuner callback previously checked the command 3 times:
1) To see if it was the XC2028_RESET_CLK
2) To see if it was not the XC2028_RESET_TUNER
3) To see if it was the XC2028_RESET_TUNER
This patch removes the third check.

Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Stephen Backway <stev391@email.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

4 files changed, 59 insertions, 11 deletions

diff --git a/drivers/media/video/cx23885/Kconfig b/drivers/media/video/cx23885/Kconfig
index e60bd31b51a..8c1b7fa47a4 100644
--- a/drivers/media/video/cx23885/Kconfig
+++ b/drivers/media/video/cx23885/Kconfig
@@ -15,6 +15,7 @@ config VIDEO_CX23885
 	select DVB_S5H1409 if !DVB_FE_CUSTOMISE
 	select DVB_S5H1411 if !DVB_FE_CUSTOMISE
 	select DVB_LGDT330X if !DVB_FE_CUSTOMISE
+	select DVB_ZL10353 if !DVB_FE_CUSTOMISE
 	select MEDIA_TUNER_XC2028 if !DVB_FE_CUSTOMIZE
 	select MEDIA_TUNER_TDA8290 if !DVB_FE_CUSTOMIZE
 	select MEDIA_TUNER_TDA18271 if !DVB_FE_CUSTOMIZE
diff --git a/drivers/media/video/cx23885/cx23885-cards.c b/drivers/media/video/cx23885/cx23885-cards.c
index 0daffc3dbec..ccea8de7c7d 100644
--- a/drivers/media/video/cx23885/cx23885-cards.c
+++ b/drivers/media/video/cx23885/cx23885-cards.c
@@ -154,6 +154,10 @@ struct cx23885_board cx23885_boards[] = {
 		.portb		= CX23885_MPEG_DVB,
 		.portc		= CX23885_MPEG_DVB,
 	},
+	[CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H] = {
+		.name		= "Leadtek Winfast PxDVR3200 H",
+		.portc		= CX23885_MPEG_DVB,
+	},
 };
 const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards);
 
@@ -229,6 +233,10 @@ struct cx23885_subid cx23885_subids[] = {
 		.subvendor = 0x18ac,
 		.subdevice = 0xdb78,
 		.card      = CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP,
+	}, {
+		.subvendor = 0x107d,
+		.subdevice = 0x6681,
+		.card      = CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H,
 	},
 };
 const unsigned int cx23885_idcount = ARRAY_SIZE(cx23885_subids);
@@ -348,21 +356,18 @@ int cx23885_tuner_callback(void *priv, int command, int arg)
 	case CX23885_BOARD_HAUPPAUGE_HVR1400:
 	case CX23885_BOARD_HAUPPAUGE_HVR1500:
 	case CX23885_BOARD_HAUPPAUGE_HVR1500Q:
+	case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H:
 		/* Tuner Reset Command */
-		if (command == 0)
-			bitmask = 0x04;
+		bitmask = 0x04;
 		break;
 	case CX23885_BOARD_DVICO_FUSIONHDTV_7_DUAL_EXP:
 	case CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP:
-		if (command == 0) {
-
-			/* Two identical tuners on two different i2c buses,
-			 * we need to reset the correct gpio. */
-			if (port->nr == 0)
-				bitmask = 0x01;
-			else if (port->nr == 1)
-				bitmask = 0x04;
-		}
+		/* Two identical tuners on two different i2c buses,
+		 * we need to reset the correct gpio. */
+		if (port->nr == 0)
+			bitmask = 0x01;
+		else if (port->nr == 1)
+			bitmask = 0x04;
 		break;
 	}
 
@@ -491,6 +496,19 @@ void cx23885_gpio_setup(struct cx23885_dev *dev)
 		mdelay(20);
 		cx_set(GP0_IO, 0x000f000f);
 		break;
+	case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H:
+		/* GPIO-2  xc3028 tuner reset */
+
+		/* The following GPIO's are on the internal AVCore (cx25840) */
+		/* GPIO-?  zl10353 demod reset */
+
+		/* Put the parts into reset and back */
+		cx_set(GP0_IO, 0x00040000);
+		mdelay(20);
+		cx_clear(GP0_IO, 0x00000004);
+		mdelay(20);
+		cx_set(GP0_IO, 0x00040004);
+		break;
 	}
 }
 
@@ -578,6 +596,7 @@ void cx23885_card_setup(struct cx23885_dev *dev)
 	case CX23885_BOARD_HAUPPAUGE_HVR1200:
 	case CX23885_BOARD_HAUPPAUGE_HVR1700:
 	case CX23885_BOARD_HAUPPAUGE_HVR1400:
+	case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H:
 	default:
 		ts2->gen_ctrl_val  = 0xc; /* Serial bus + punctured clock */
 		ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */
@@ -591,6 +610,7 @@ void cx23885_card_setup(struct cx23885_dev *dev)
 	case CX23885_BOARD_HAUPPAUGE_HVR1800:
 	case CX23885_BOARD_HAUPPAUGE_HVR1800lp:
 	case CX23885_BOARD_HAUPPAUGE_HVR1700:
+	case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H:
 		request_module("cx25840");
 		break;
 	}
diff --git a/drivers/media/video/cx23885/cx23885-dvb.c b/drivers/media/video/cx23885/cx23885-dvb.c
index f8564bb0d42..b85cb39b101 100644
--- a/drivers/media/video/cx23885/cx23885-dvb.c
+++ b/drivers/media/video/cx23885/cx23885-dvb.c
@@ -501,6 +501,32 @@ static int dvb_register(struct cx23885_tsport *port)
 		}
 		break;
 	}
+	case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H:
+		i2c_bus = &dev->i2c_bus[0];
+
+		port->dvb.frontend = dvb_attach(zl10353_attach,
+			&dvico_fusionhdtv_xc3028,
+			&i2c_bus->i2c_adap);
+		if (port->dvb.frontend != NULL) {
+			struct dvb_frontend      *fe;
+			struct xc2028_config	  cfg = {
+				.i2c_adap  = &dev->i2c_bus[1].i2c_adap,
+				.i2c_addr  = 0x61,
+				.video_dev = port,
+				.callback  = cx23885_tuner_callback,
+			};
+			static struct xc2028_ctrl ctl = {
+				.fname       = "xc3028-v27.fw",
+				.max_len     = 64,
+				.demod       = XC3028_FE_ZARLINK456,
+			};
+
+			fe = dvb_attach(xc2028_attach, port->dvb.frontend,
+				&cfg);
+			if (fe != NULL && fe->ops.tuner_ops.set_config != NULL)
+				fe->ops.tuner_ops.set_config(fe, &ctl);
+		}
+		break;
 	default:
 		printk("%s: The frontend of your DVB/ATSC card isn't supported yet\n",
 		       dev->name);
diff --git a/drivers/media/video/cx23885/cx23885.h b/drivers/media/video/cx23885/cx23885.h
index db52d814a97..4e0fcb3f7fc 100644
--- a/drivers/media/video/cx23885/cx23885.h
+++ b/drivers/media/video/cx23885/cx23885.h
@@ -65,6 +65,7 @@
 #define CX23885_BOARD_HAUPPAUGE_HVR1400        9
 #define CX23885_BOARD_DVICO_FUSIONHDTV_7_DUAL_EXP 10
 #define CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP 11
+#define CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H 12
 
 /* Currently unsupported by the driver: PAL/H, NTSC/Kr, SECAM B/G/H/LC */
 #define CX23885_NORMS (\