V4L/DVB (6833): Don't limit cx88 audio routing to blackbird boards

All cx2388 boards need the line-in audio to be routed from an external ADC
(refered to as "ADC mode" in the spec sheet), since the chip is uncapable
of dealing with baseband audio directly.
So... this patch enables normal mode when using the tuner (TV or Radio), and
enables ADC mode with any other source. It'll probably only work with boards
that have supported ADCs (such as the Wolfson wm9775)

Signed-off-by: Ricardo Cerqueira <v4l@cerqueira.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

1 files changed, 31 insertions, 15 deletions

diff --git a/drivers/media/video/cx88/cx88-video.c b/drivers/media/video/cx88/cx88-video.c
index 1b80f0f700e..c8a5cd5eedf 100644
--- a/drivers/media/video/cx88/cx88-video.c
+++ b/drivers/media/video/cx88/cx88-video.c
@@ -392,25 +392,41 @@ int cx88_video_mux(struct cx88_core *core, unsigned int input)
 		break;
 	}
 
-	if (core->board.mpeg & CX88_MPEG_BLACKBIRD) {
-		/* sets sound input from external adc */
-		if (INPUT(input).audioroute) {
-			/* The wm8775 module has the "2" route hardwired into
-			   the initialization. Some boards may use different
-			   routes for different inputs. HVR-1300 surely does */
-			if (core->board.audio_chip &&
-			    core->board.audio_chip == AUDIO_CHIP_WM8775) {
-				struct v4l2_routing route;
-
-				route.input = INPUT(input).audioroute;
-				cx88_call_i2c_clients(core,
-					VIDIOC_INT_S_AUDIO_ROUTING,&route);
-			}
+	/* if there are audioroutes defined, we have an external
+	   ADC to deal with audio */
 
+	if (INPUT(input).audioroute) {
+
+		/* cx2388's C-ADC is connected to the tuner only.
+		   When used with S-Video, that ADC is busy dealing with
+		   chroma, so an external must be used for baseband audio */
+
+		if (INPUT(input).type != CX88_VMUX_TELEVISION &&
+			INPUT(input).type != CX88_RADIO) {
+			/* "ADC mode" */
+			cx_write(AUD_I2SCNTL, 0x1);
 			cx_set(AUD_CTL, EN_I2SIN_ENABLE);
-		} else
+		} else {
+			/* Normal mode */
+			cx_write(AUD_I2SCNTL, 0x0);
 			cx_clear(AUD_CTL, EN_I2SIN_ENABLE);
+		}
+
+		/* The wm8775 module has the "2" route hardwired into
+		   the initialization. Some boards may use different
+		   routes for different inputs. HVR-1300 surely does */
+		if (core->board.audio_chip &&
+		    core->board.audio_chip == AUDIO_CHIP_WM8775) {
+			struct v4l2_routing route;
+
+			route.input = INPUT(input).audioroute;
+			cx88_call_i2c_clients(core,
+				VIDIOC_INT_S_AUDIO_ROUTING,&route);
+
+		}
+
 	}
+
 	return 0;
 }
 EXPORT_SYMBOL(cx88_video_mux);