V4L/DVB (9223): MFE: Fix a number of bugs and some tidying up

A number of reference to videobuf_dvb_get_frontend used an invalid
index. This has been fixed.

The section for the HVR3000 in advise_acquire was redundant as
the same logic is used on the HVR4000. This has been removed
and both cards now use the same function.

A number of small errors and whitespace errors are also fixed.

Signed-off-by: Darron Broad <darron@kewl.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

3 files changed, 4 insertions, 36 deletions

diff --git a/drivers/media/video/cx88/cx88-cards.c b/drivers/media/video/cx88/cx88-cards.c
index 638d9ec38d7..402a5db90e4 100644
--- a/drivers/media/video/cx88/cx88-cards.c
+++ b/drivers/media/video/cx88/cx88-cards.c
@@ -3004,7 +3004,6 @@ struct cx88_core *cx88_core_create(struct pci_dev *pci, int nr)
 		cx88_card_list(core, pci);
 	}
 
-	memset(&core->board, 0, sizeof(core->board));
 	memcpy(&core->board, &cx88_boards[core->boardnr], sizeof(core->board));
 
 	if (!core->board.num_frontends)
diff --git a/drivers/media/video/cx88/cx88-dvb.c b/drivers/media/video/cx88/cx88-dvb.c
index 099de66c72c..58128687e5c 100644
--- a/drivers/media/video/cx88/cx88-dvb.c
+++ b/drivers/media/video/cx88/cx88-dvb.c
@@ -124,7 +124,6 @@ static int cx88_dvb_bus_ctrl(struct dvb_frontend* fe, int acquire)
 		return -EINVAL;
 	}
 
-
 	drv = cx8802_get_driver(dev, CX88_MPEG_DVB);
 	if (drv) {
 		if (acquire){
@@ -502,7 +501,7 @@ static int attach_xc3028(u8 addr, struct cx8802_dev *dev)
 		.ctrl      = &ctl,
 	};
 
-/* Get the first frontend */
+	/* Get the first frontend */
 	fe0 = videobuf_dvb_get_frontend(&dev->frontends, 1);
 	if (!fe0)
 		return -EINVAL;
@@ -1136,35 +1135,7 @@ static int cx8802_dvb_advise_acquire(struct cx8802_driver *drv)
 		udelay(1000);
 		break;
 
-	case CX88_BOARD_HAUPPAUGE_HVR3000: /* ? */
-		if(core->dvbdev->frontends.active_fe_id == 1) {
-			/* DVB-S/S2 Enabled */
-
-			/* Toggle reset on cx22702 leaving i2c active */
-			cx_write(MO_GP0_IO, core->board.input[0].gpio0);
-			udelay(1000);
-			cx_clear(MO_GP0_IO, 0x00000080);
-			udelay(50);
-			cx_set(MO_GP0_IO, 0x00000080); /* cx22702 out of reset */
-			cx_set(MO_GP0_IO, 0x00000004); /* tri-state the cx22702 pins */
-			udelay(1000);
-
-			cx_write(MO_SRST_IO, 1); /* Take the cx24116/cx24123 out of reset */
-			core->dvbdev->ts_gen_cntrl = 0x02; /* Parallel IO */
-		} else
-		if (core->dvbdev->frontends.active_fe_id == 2) {
-			/* DVB-T Enabled */
-
-			/* Put the cx24116/cx24123 into reset */
-			cx_write(MO_SRST_IO, 0);
-
-			/* cx22702 out of reset and enable it */
-			cx_set(MO_GP0_IO,   0x00000080);
-			cx_clear(MO_GP0_IO, 0x00000004);
-			core->dvbdev->ts_gen_cntrl = 0x0c; /* Serial IO */
-			udelay(1000);
-		}
-		break;
+	case CX88_BOARD_HAUPPAUGE_HVR3000:
 	case CX88_BOARD_HAUPPAUGE_HVR4000:
 		if(core->dvbdev->frontends.active_fe_id == 1) {
 			/* DVB-S/S2 Enabled */
@@ -1225,7 +1196,7 @@ static int cx8802_dvb_probe(struct cx8802_driver *drv)
 {
 	struct cx88_core *core = drv->core;
 	struct cx8802_dev *dev = drv->core->dvbdev;
-	int err,i;
+	int err, i;
 	struct videobuf_dvb_frontend *fe;
 
 	dprintk( 1, "%s\n", __func__);
@@ -1267,8 +1238,7 @@ static int cx8802_dvb_probe(struct cx8802_driver *drv)
 	if (err != 0)
 		printk(KERN_ERR "%s/2: dvb_register failed (err = %d)\n",
 		       core->name, err);
-
- fail_core:
+fail_core:
 	return err;
 }
 
diff --git a/drivers/media/video/cx88/cx88-input.c b/drivers/media/video/cx88/cx88-input.c
index 17150cb88c8..8683d104de7 100644
--- a/drivers/media/video/cx88/cx88-input.c
+++ b/drivers/media/video/cx88/cx88-input.c
@@ -495,7 +495,6 @@ void cx88_ir_irq(struct cx88_core *core)
 	case CX88_BOARD_PINNACLE_PCTV_HD_800i:
 		ircode = ir_decode_biphase(ir->samples, ir->scount, 5, 7);
 		ir_dprintk("biphase decoded: %x\n", ircode);
-//TODO Darron has other code here
 		if ((ircode & 0xfffff000) != 0x3000)
 			break;
 		ir_input_keydown(ir->input, &ir->ir, ircode & 0x3f, ircode);