[media] rename drivers/media/video as .../platform

The remaining drivers are mostly platform drivers. Name the
dir to reflect it.

It makes sense to latter break it into a few other dirs.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

23 files changed, 0 insertions, 18454 deletions

diff --git a/drivers/media/video/davinci/Kconfig b/drivers/media/video/davinci/Kconfig
deleted file mode 100644
index 52c5ca68cb3..00000000000
--- a/drivers/media/video/davinci/Kconfig
+++ /dev/null
@@ -1,121 +0,0 @@
-config VIDEO_DAVINCI_VPIF_DISPLAY
-	tristate "DM646x/DA850/OMAPL138 EVM Video Display"
-	depends on VIDEO_DEV && (MACH_DAVINCI_DM6467_EVM || MACH_DAVINCI_DA850_EVM)
-	select VIDEOBUF2_DMA_CONTIG
-	select VIDEO_DAVINCI_VPIF
-	select VIDEO_ADV7343 if VIDEO_HELPER_CHIPS_AUTO
-	select VIDEO_THS7303 if VIDEO_HELPER_CHIPS_AUTO
-	help
-	  Enables Davinci VPIF module used for display devices.
-	  This module is common for following DM6467/DA850/OMAPL138
-	  based display devices.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called vpif_display.
-
-config VIDEO_DAVINCI_VPIF_CAPTURE
-	tristate "DM646x/DA850/OMAPL138 EVM Video Capture"
-	depends on VIDEO_DEV && (MACH_DAVINCI_DM6467_EVM || MACH_DAVINCI_DA850_EVM)
-	select VIDEOBUF2_DMA_CONTIG
-	select VIDEO_DAVINCI_VPIF
-	help
-	  Enables Davinci VPIF module used for captur devices.
-	  This module is common for following DM6467/DA850/OMAPL138
-	  based capture devices.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called vpif_capture.
-
-config VIDEO_DAVINCI_VPIF
-	tristate "DaVinci VPIF Driver"
-	depends on VIDEO_DAVINCI_VPIF_DISPLAY || VIDEO_DAVINCI_VPIF_CAPTURE
-	help
-	  Support for DaVinci VPIF Driver.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called vpif.
-
-config VIDEO_VPSS_SYSTEM
-	tristate "VPSS System module driver"
-	depends on ARCH_DAVINCI
-	help
-	  Support for vpss system module for video driver
-
-config VIDEO_VPFE_CAPTURE
-	tristate "VPFE Video Capture Driver"
-	depends on VIDEO_V4L2 && (ARCH_DAVINCI || ARCH_OMAP3)
-	depends on I2C
-	select VIDEOBUF_DMA_CONTIG
-	help
-	  Support for DMx/AMx VPFE based frame grabber. This is the
-	  common V4L2 module for following DMx/AMx SoCs from Texas
-	  Instruments:- DM6446, DM365, DM355 & AM3517/05.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called vpfe-capture.
-
-config VIDEO_DM6446_CCDC
-	tristate "DM6446 CCDC HW module"
-	depends on VIDEO_VPFE_CAPTURE
-	select VIDEO_VPSS_SYSTEM
-	default y
-	help
-	   Enables DaVinci CCD hw module. DaVinci CCDC hw interfaces
-	   with decoder modules such as TVP5146 over BT656 or
-	   sensor module such as MT9T001 over a raw interface. This
-	   module configures the interface and CCDC/ISIF to do
-	   video frame capture from slave decoders.
-
-	   To compile this driver as a module, choose M here: the
-	   module will be called vpfe.
-
-config VIDEO_DM355_CCDC
-	tristate "DM355 CCDC HW module"
-	depends on ARCH_DAVINCI_DM355 && VIDEO_VPFE_CAPTURE
-	select VIDEO_VPSS_SYSTEM
-	default y
-	help
-	   Enables DM355 CCD hw module. DM355 CCDC hw interfaces
-	   with decoder modules such as TVP5146 over BT656 or
-	   sensor module such as MT9T001 over a raw interface. This
-	   module configures the interface and CCDC/ISIF to do
-	   video frame capture from a slave decoders
-
-	   To compile this driver as a module, choose M here: the
-	   module will be called vpfe.
-
-config VIDEO_ISIF
-	tristate "ISIF HW module"
-	depends on ARCH_DAVINCI_DM365 && VIDEO_VPFE_CAPTURE
-	select VIDEO_VPSS_SYSTEM
-	default y
-	help
-	   Enables ISIF hw module. This is the hardware module for
-	   configuring ISIF in VPFE to capture Raw Bayer RGB data  from
-	   a image sensor or YUV data from a YUV source.
-
-	   To compile this driver as a module, choose M here: the
-	   module will be called vpfe.
-
-config VIDEO_DM644X_VPBE
-	tristate "DM644X VPBE HW module"
-	depends on ARCH_DAVINCI_DM644x
-	select VIDEO_VPSS_SYSTEM
-	select VIDEOBUF_DMA_CONTIG
-	help
-	    Enables VPBE modules used for display on a DM644x
-	    SoC.
-
-	    To compile this driver as a module, choose M here: the
-	    module will be called vpbe.
-
-
-config VIDEO_VPBE_DISPLAY
-	tristate "VPBE V4L2 Display driver"
-	depends on ARCH_DAVINCI_DM644x
-	select VIDEO_DM644X_VPBE
-	help
-	    Enables VPBE V4L2 Display driver on a DM644x device
-
-	    To compile this driver as a module, choose M here: the
-	    module will be called vpbe_display.
diff --git a/drivers/media/video/davinci/Makefile b/drivers/media/video/davinci/Makefile
deleted file mode 100644
index 74ed92d0925..00000000000
--- a/drivers/media/video/davinci/Makefile
+++ /dev/null
@@ -1,20 +0,0 @@
-#
-# Makefile for the davinci video device drivers.
-#
-
-# VPIF
-obj-$(CONFIG_VIDEO_DAVINCI_VPIF) += vpif.o
-
-#VPIF Display driver
-obj-$(CONFIG_VIDEO_DAVINCI_VPIF_DISPLAY) += vpif_display.o
-#VPIF Capture driver
-obj-$(CONFIG_VIDEO_DAVINCI_VPIF_CAPTURE) += vpif_capture.o
-
-# Capture: DM6446 and DM355
-obj-$(CONFIG_VIDEO_VPSS_SYSTEM) += vpss.o
-obj-$(CONFIG_VIDEO_VPFE_CAPTURE) += vpfe_capture.o
-obj-$(CONFIG_VIDEO_DM6446_CCDC) += dm644x_ccdc.o
-obj-$(CONFIG_VIDEO_DM355_CCDC) += dm355_ccdc.o
-obj-$(CONFIG_VIDEO_ISIF) += isif.o
-obj-$(CONFIG_VIDEO_DM644X_VPBE) += vpbe.o vpbe_osd.o vpbe_venc.o
-obj-$(CONFIG_VIDEO_VPBE_DISPLAY) += vpbe_display.o
diff --git a/drivers/media/video/davinci/ccdc_hw_device.h b/drivers/media/video/davinci/ccdc_hw_device.h
deleted file mode 100644
index 86b9b351896..00000000000
--- a/drivers/media/video/davinci/ccdc_hw_device.h
+++ /dev/null
@@ -1,110 +0,0 @@
-/*
- * Copyright (C) 2008-2009 Texas Instruments Inc
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- * ccdc device API
- */
-#ifndef _CCDC_HW_DEVICE_H
-#define _CCDC_HW_DEVICE_H
-
-#ifdef __KERNEL__
-#include <linux/videodev2.h>
-#include <linux/device.h>
-#include <media/davinci/vpfe_types.h>
-#include <media/davinci/ccdc_types.h>
-
-/*
- * ccdc hw operations
- */
-struct ccdc_hw_ops {
-	/* Pointer to initialize function to initialize ccdc device */
-	int (*open) (struct device *dev);
-	/* Pointer to deinitialize function */
-	int (*close) (struct device *dev);
-	/* set ccdc base address */
-	void (*set_ccdc_base)(void *base, int size);
-	/* Pointer to function to enable or disable ccdc */
-	void (*enable) (int en);
-	/* reset sbl. only for 6446 */
-	void (*reset) (void);
-	/* enable output to sdram */
-	void (*enable_out_to_sdram) (int en);
-	/* Pointer to function to set hw parameters */
-	int (*set_hw_if_params) (struct vpfe_hw_if_param *param);
-	/* get interface parameters */
-	int (*get_hw_if_params) (struct vpfe_hw_if_param *param);
-	/*
-	 * Pointer to function to set parameters. Used
-	 * for implementing VPFE_S_CCDC_PARAMS
-	 */
-	int (*set_params) (void *params);
-	/*
-	 * Pointer to function to get parameter. Used
-	 * for implementing VPFE_G_CCDC_PARAMS
-	 */
-	int (*get_params) (void *params);
-	/* Pointer to function to configure ccdc */
-	int (*configure) (void);
-
-	/* Pointer to function to set buffer type */
-	int (*set_buftype) (enum ccdc_buftype buf_type);
-	/* Pointer to function to get buffer type */
-	enum ccdc_buftype (*get_buftype) (void);
-	/* Pointer to function to set frame format */
-	int (*set_frame_format) (enum ccdc_frmfmt frm_fmt);
-	/* Pointer to function to get frame format */
-	enum ccdc_frmfmt (*get_frame_format) (void);
-	/* enumerate hw pix formats */
-	int (*enum_pix)(u32 *hw_pix, int i);
-	/* Pointer to function to set buffer type */
-	u32 (*get_pixel_format) (void);
-	/* Pointer to function to get pixel format. */
-	int (*set_pixel_format) (u32 pixfmt);
-	/* Pointer to function to set image window */
-	int (*set_image_window) (struct v4l2_rect *win);
-	/* Pointer to function to set image window */
-	void (*get_image_window) (struct v4l2_rect *win);
-	/* Pointer to function to get line length */
-	unsigned int (*get_line_length) (void);
-
-	/* Query CCDC control IDs */
-	int (*queryctrl)(struct v4l2_queryctrl *qctrl);
-	/* Set CCDC control */
-	int (*set_control)(struct v4l2_control *ctrl);
-	/* Get CCDC control */
-	int (*get_control)(struct v4l2_control *ctrl);
-
-	/* Pointer to function to set frame buffer address */
-	void (*setfbaddr) (unsigned long addr);
-	/* Pointer to function to get field id */
-	int (*getfid) (void);
-};
-
-struct ccdc_hw_device {
-	/* ccdc device name */
-	char name[32];
-	/* module owner */
-	struct module *owner;
-	/* hw ops */
-	struct ccdc_hw_ops hw_ops;
-};
-
-/* Used by CCDC module to register & unregister with vpfe capture driver */
-int vpfe_register_ccdc_device(struct ccdc_hw_device *dev);
-void vpfe_unregister_ccdc_device(struct ccdc_hw_device *dev);
-
-#endif
-#endif
diff --git a/drivers/media/video/davinci/dm355_ccdc.c b/drivers/media/video/davinci/dm355_ccdc.c
deleted file mode 100644
index ce0e4131c06..00000000000
--- a/drivers/media/video/davinci/dm355_ccdc.c
+++ /dev/null
@@ -1,1072 +0,0 @@
-/*
- * Copyright (C) 2005-2009 Texas Instruments Inc
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- * CCDC hardware module for DM355
- * ------------------------------
- *
- * This module is for configuring DM355 CCD controller of VPFE to capture
- * Raw yuv or Bayer RGB data from a decoder. CCDC has several modules
- * such as Defect Pixel Correction, Color Space Conversion etc to
- * pre-process the Bayer RGB data, before writing it to SDRAM. This
- * module also allows application to configure individual
- * module parameters through VPFE_CMD_S_CCDC_RAW_PARAMS IOCTL.
- * To do so, application include dm355_ccdc.h and vpfe_capture.h header
- * files. The setparams() API is called by vpfe_capture driver
- * to configure module parameters
- *
- * TODO: 1) Raw bayer parameter settings and bayer capture
- * 	 2) Split module parameter structure to module specific ioctl structs
- *	 3) add support for lense shading correction
- *	 4) investigate if enum used for user space type definition
- * 	    to be replaced by #defines or integer
- */
-#include <linux/platform_device.h>
-#include <linux/uaccess.h>
-#include <linux/videodev2.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/module.h>
-
-#include <media/davinci/dm355_ccdc.h>
-#include <media/davinci/vpss.h>
-
-#include "dm355_ccdc_regs.h"
-#include "ccdc_hw_device.h"
-
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("CCDC Driver for DM355");
-MODULE_AUTHOR("Texas Instruments");
-
-static struct ccdc_oper_config {
-	struct device *dev;
-	/* CCDC interface type */
-	enum vpfe_hw_if_type if_type;
-	/* Raw Bayer configuration */
-	struct ccdc_params_raw bayer;
-	/* YCbCr configuration */
-	struct ccdc_params_ycbcr ycbcr;
-	/* Master clock */
-	struct clk *mclk;
-	/* slave clock */
-	struct clk *sclk;
-	/* ccdc base address */
-	void __iomem *base_addr;
-} ccdc_cfg = {
-	/* Raw configurations */
-	.bayer = {
-		.pix_fmt = CCDC_PIXFMT_RAW,
-		.frm_fmt = CCDC_FRMFMT_PROGRESSIVE,
-		.win = CCDC_WIN_VGA,
-		.fid_pol = VPFE_PINPOL_POSITIVE,
-		.vd_pol = VPFE_PINPOL_POSITIVE,
-		.hd_pol = VPFE_PINPOL_POSITIVE,
-		.gain = {
-			.r_ye = 256,
-			.gb_g = 256,
-			.gr_cy = 256,
-			.b_mg = 256
-		},
-		.config_params = {
-			.datasft = 2,
-			.mfilt1 = CCDC_NO_MEDIAN_FILTER1,
-			.mfilt2 = CCDC_NO_MEDIAN_FILTER2,
-			.alaw = {
-				.gama_wd = 2,
-			},
-			.blk_clamp = {
-				.sample_pixel = 1,
-				.dc_sub = 25
-			},
-			.col_pat_field0 = {
-				.olop = CCDC_GREEN_BLUE,
-				.olep = CCDC_BLUE,
-				.elop = CCDC_RED,
-				.elep = CCDC_GREEN_RED
-			},
-			.col_pat_field1 = {
-				.olop = CCDC_GREEN_BLUE,
-				.olep = CCDC_BLUE,
-				.elop = CCDC_RED,
-				.elep = CCDC_GREEN_RED
-			},
-		},
-	},
-	/* YCbCr configuration */
-	.ycbcr = {
-		.win = CCDC_WIN_PAL,
-		.pix_fmt = CCDC_PIXFMT_YCBCR_8BIT,
-		.frm_fmt = CCDC_FRMFMT_INTERLACED,
-		.fid_pol = VPFE_PINPOL_POSITIVE,
-		.vd_pol = VPFE_PINPOL_POSITIVE,
-		.hd_pol = VPFE_PINPOL_POSITIVE,
-		.bt656_enable = 1,
-		.pix_order = CCDC_PIXORDER_CBYCRY,
-		.buf_type = CCDC_BUFTYPE_FLD_INTERLEAVED
-	},
-};
-
-
-/* Raw Bayer formats */
-static u32 ccdc_raw_bayer_pix_formats[] =
-		{V4L2_PIX_FMT_SBGGR8, V4L2_PIX_FMT_SBGGR16};
-
-/* Raw YUV formats */
-static u32 ccdc_raw_yuv_pix_formats[] =
-		{V4L2_PIX_FMT_UYVY, V4L2_PIX_FMT_YUYV};
-
-/* register access routines */
-static inline u32 regr(u32 offset)
-{
-	return __raw_readl(ccdc_cfg.base_addr + offset);
-}
-
-static inline void regw(u32 val, u32 offset)
-{
-	__raw_writel(val, ccdc_cfg.base_addr + offset);
-}
-
-static void ccdc_enable(int en)
-{
-	unsigned int temp;
-	temp = regr(SYNCEN);
-	temp &= (~CCDC_SYNCEN_VDHDEN_MASK);
-	temp |= (en & CCDC_SYNCEN_VDHDEN_MASK);
-	regw(temp, SYNCEN);
-}
-
-static void ccdc_enable_output_to_sdram(int en)
-{
-	unsigned int temp;
-	temp = regr(SYNCEN);
-	temp &= (~(CCDC_SYNCEN_WEN_MASK));
-	temp |= ((en << CCDC_SYNCEN_WEN_SHIFT) & CCDC_SYNCEN_WEN_MASK);
-	regw(temp, SYNCEN);
-}
-
-static void ccdc_config_gain_offset(void)
-{
-	/* configure gain */
-	regw(ccdc_cfg.bayer.gain.r_ye, RYEGAIN);
-	regw(ccdc_cfg.bayer.gain.gr_cy, GRCYGAIN);
-	regw(ccdc_cfg.bayer.gain.gb_g, GBGGAIN);
-	regw(ccdc_cfg.bayer.gain.b_mg, BMGGAIN);
-	/* configure offset */
-	regw(ccdc_cfg.bayer.ccdc_offset, OFFSET);
-}
-
-/*
- * ccdc_restore_defaults()
- * This function restore power on defaults in the ccdc registers
- */
-static int ccdc_restore_defaults(void)
-{
-	int i;
-
-	dev_dbg(ccdc_cfg.dev, "\nstarting ccdc_restore_defaults...");
-	/* set all registers to zero */
-	for (i = 0; i <= CCDC_REG_LAST; i += 4)
-		regw(0, i);
-
-	/* now override the values with power on defaults in registers */
-	regw(MODESET_DEFAULT, MODESET);
-	/* no culling support */
-	regw(CULH_DEFAULT, CULH);
-	regw(CULV_DEFAULT, CULV);
-	/* Set default Gain and Offset */
-	ccdc_cfg.bayer.gain.r_ye = GAIN_DEFAULT;
-	ccdc_cfg.bayer.gain.gb_g = GAIN_DEFAULT;
-	ccdc_cfg.bayer.gain.gr_cy = GAIN_DEFAULT;
-	ccdc_cfg.bayer.gain.b_mg = GAIN_DEFAULT;
-	ccdc_config_gain_offset();
-	regw(OUTCLIP_DEFAULT, OUTCLIP);
-	regw(LSCCFG2_DEFAULT, LSCCFG2);
-	/* select ccdc input */
-	if (vpss_select_ccdc_source(VPSS_CCDCIN)) {
-		dev_dbg(ccdc_cfg.dev, "\ncouldn't select ccdc input source");
-		return -EFAULT;
-	}
-	/* select ccdc clock */
-	if (vpss_enable_clock(VPSS_CCDC_CLOCK, 1) < 0) {
-		dev_dbg(ccdc_cfg.dev, "\ncouldn't enable ccdc clock");
-		return -EFAULT;
-	}
-	dev_dbg(ccdc_cfg.dev, "\nEnd of ccdc_restore_defaults...");
-	return 0;
-}
-
-static int ccdc_open(struct device *device)
-{
-	return ccdc_restore_defaults();
-}
-
-static int ccdc_close(struct device *device)
-{
-	/* disable clock */
-	vpss_enable_clock(VPSS_CCDC_CLOCK, 0);
-	/* do nothing for now */
-	return 0;
-}
-/*
- * ccdc_setwin()
- * This function will configure the window size to
- * be capture in CCDC reg.
- */
-static void ccdc_setwin(struct v4l2_rect *image_win,
-			enum ccdc_frmfmt frm_fmt, int ppc)
-{
-	int horz_start, horz_nr_pixels;
-	int vert_start, vert_nr_lines;
-	int mid_img = 0;
-
-	dev_dbg(ccdc_cfg.dev, "\nStarting ccdc_setwin...");
-
-	/*
-	 * ppc - per pixel count. indicates how many pixels per cell
-	 * output to SDRAM. example, for ycbcr, it is one y and one c, so 2.
-	 * raw capture this is 1
-	 */
-	horz_start = image_win->left << (ppc - 1);
-	horz_nr_pixels = ((image_win->width) << (ppc - 1)) - 1;
-
-	/* Writing the horizontal info into the registers */
-	regw(horz_start, SPH);
-	regw(horz_nr_pixels, NPH);
-	vert_start = image_win->top;
-
-	if (frm_fmt == CCDC_FRMFMT_INTERLACED) {
-		vert_nr_lines = (image_win->height >> 1) - 1;
-		vert_start >>= 1;
-		/* Since first line doesn't have any data */
-		vert_start += 1;
-		/* configure VDINT0 and VDINT1 */
-		regw(vert_start, VDINT0);
-	} else {
-		/* Since first line doesn't have any data */
-		vert_start += 1;
-		vert_nr_lines = image_win->height - 1;
-		/* configure VDINT0 and VDINT1 */
-		mid_img = vert_start + (image_win->height / 2);
-		regw(vert_start, VDINT0);
-		regw(mid_img, VDINT1);
-	}
-	regw(vert_start & CCDC_START_VER_ONE_MASK, SLV0);
-	regw(vert_start & CCDC_START_VER_TWO_MASK, SLV1);
-	regw(vert_nr_lines & CCDC_NUM_LINES_VER, NLV);
-	dev_dbg(ccdc_cfg.dev, "\nEnd of ccdc_setwin...");
-}
-
-static int validate_ccdc_param(struct ccdc_config_params_raw *ccdcparam)
-{
-	if (ccdcparam->datasft < CCDC_DATA_NO_SHIFT ||
-	    ccdcparam->datasft > CCDC_DATA_SHIFT_6BIT) {
-		dev_dbg(ccdc_cfg.dev, "Invalid value of data shift\n");
-		return -EINVAL;
-	}
-
-	if (ccdcparam->mfilt1 < CCDC_NO_MEDIAN_FILTER1 ||
-	    ccdcparam->mfilt1 > CCDC_MEDIAN_FILTER1) {
-		dev_dbg(ccdc_cfg.dev, "Invalid value of median filter1\n");
-		return -EINVAL;
-	}
-
-	if (ccdcparam->mfilt2 < CCDC_NO_MEDIAN_FILTER2 ||
-	    ccdcparam->mfilt2 > CCDC_MEDIAN_FILTER2) {
-		dev_dbg(ccdc_cfg.dev, "Invalid value of median filter2\n");
-		return -EINVAL;
-	}
-
-	if ((ccdcparam->med_filt_thres < 0) ||
-	   (ccdcparam->med_filt_thres > CCDC_MED_FILT_THRESH)) {
-		dev_dbg(ccdc_cfg.dev,
-			"Invalid value of median filter threshold\n");
-		return -EINVAL;
-	}
-
-	if (ccdcparam->data_sz < CCDC_DATA_16BITS ||
-	    ccdcparam->data_sz > CCDC_DATA_8BITS) {
-		dev_dbg(ccdc_cfg.dev, "Invalid value of data size\n");
-		return -EINVAL;
-	}
-
-	if (ccdcparam->alaw.enable) {
-		if (ccdcparam->alaw.gama_wd < CCDC_GAMMA_BITS_13_4 ||
-		    ccdcparam->alaw.gama_wd > CCDC_GAMMA_BITS_09_0) {
-			dev_dbg(ccdc_cfg.dev, "Invalid value of ALAW\n");
-			return -EINVAL;
-		}
-	}
-
-	if (ccdcparam->blk_clamp.b_clamp_enable) {
-		if (ccdcparam->blk_clamp.sample_pixel < CCDC_SAMPLE_1PIXELS ||
-		    ccdcparam->blk_clamp.sample_pixel > CCDC_SAMPLE_16PIXELS) {
-			dev_dbg(ccdc_cfg.dev,
-				"Invalid value of sample pixel\n");
-			return -EINVAL;
-		}
-		if (ccdcparam->blk_clamp.sample_ln < CCDC_SAMPLE_1LINES ||
-		    ccdcparam->blk_clamp.sample_ln > CCDC_SAMPLE_16LINES) {
-			dev_dbg(ccdc_cfg.dev,
-				"Invalid value of sample lines\n");
-			return -EINVAL;
-		}
-	}
-	return 0;
-}
-
-/* Parameter operations */
-static int ccdc_set_params(void __user *params)
-{
-	struct ccdc_config_params_raw ccdc_raw_params;
-	int x;
-
-	/* only raw module parameters can be set through the IOCTL */
-	if (ccdc_cfg.if_type != VPFE_RAW_BAYER)
-		return -EINVAL;
-
-	x = copy_from_user(&ccdc_raw_params, params, sizeof(ccdc_raw_params));
-	if (x) {
-		dev_dbg(ccdc_cfg.dev, "ccdc_set_params: error in copying ccdc"
-			"params, %d\n", x);
-		return -EFAULT;
-	}
-
-	if (!validate_ccdc_param(&ccdc_raw_params)) {
-		memcpy(&ccdc_cfg.bayer.config_params,
-			&ccdc_raw_params,
-			sizeof(ccdc_raw_params));
-		return 0;
-	}
-	return -EINVAL;
-}
-
-/* This function will configure CCDC for YCbCr video capture */
-static void ccdc_config_ycbcr(void)
-{
-	struct ccdc_params_ycbcr *params = &ccdc_cfg.ycbcr;
-	u32 temp;
-
-	/* first set the CCDC power on defaults values in all registers */
-	dev_dbg(ccdc_cfg.dev, "\nStarting ccdc_config_ycbcr...");
-	ccdc_restore_defaults();
-
-	/* configure pixel format & video frame format */
-	temp = (((params->pix_fmt & CCDC_INPUT_MODE_MASK) <<
-		CCDC_INPUT_MODE_SHIFT) |
-		((params->frm_fmt & CCDC_FRM_FMT_MASK) <<
-		CCDC_FRM_FMT_SHIFT));
-
-	/* setup BT.656 sync mode */
-	if (params->bt656_enable) {
-		regw(CCDC_REC656IF_BT656_EN, REC656IF);
-		/*
-		 * configure the FID, VD, HD pin polarity fld,hd pol positive,
-		 * vd negative, 8-bit pack mode
-		 */
-		temp |= CCDC_VD_POL_NEGATIVE;
-	} else {		/* y/c external sync mode */
-		temp |= (((params->fid_pol & CCDC_FID_POL_MASK) <<
-			CCDC_FID_POL_SHIFT) |
-			((params->hd_pol & CCDC_HD_POL_MASK) <<
-			CCDC_HD_POL_SHIFT) |
-			((params->vd_pol & CCDC_VD_POL_MASK) <<
-			CCDC_VD_POL_SHIFT));
-	}
-
-	/* pack the data to 8-bit */
-	temp |= CCDC_DATA_PACK_ENABLE;
-
-	regw(temp, MODESET);
-
-	/* configure video window */
-	ccdc_setwin(&params->win, params->frm_fmt, 2);
-
-	/* configure the order of y cb cr in SD-RAM */
-	temp = (params->pix_order << CCDC_Y8POS_SHIFT);
-	temp |= CCDC_LATCH_ON_VSYNC_DISABLE | CCDC_CCDCFG_FIDMD_NO_LATCH_VSYNC;
-	regw(temp, CCDCFG);
-
-	/*
-	 * configure the horizontal line offset. This is done by rounding up
-	 * width to a multiple of 16 pixels and multiply by two to account for
-	 * y:cb:cr 4:2:2 data
-	 */
-	regw(((params->win.width * 2 + 31) >> 5), HSIZE);
-
-	/* configure the memory line offset */
-	if (params->buf_type == CCDC_BUFTYPE_FLD_INTERLEAVED) {
-		/* two fields are interleaved in memory */
-		regw(CCDC_SDOFST_FIELD_INTERLEAVED, SDOFST);
-	}
-
-	dev_dbg(ccdc_cfg.dev, "\nEnd of ccdc_config_ycbcr...\n");
-}
-
-/*
- * ccdc_config_black_clamp()
- * configure parameters for Optical Black Clamp
- */
-static void ccdc_config_black_clamp(struct ccdc_black_clamp *bclamp)
-{
-	u32 val;
-
-	if (!bclamp->b_clamp_enable) {
-		/* configure DCSub */
-		regw(bclamp->dc_sub & CCDC_BLK_DC_SUB_MASK, DCSUB);
-		regw(0x0000, CLAMP);
-		return;
-	}
-	/* Enable the Black clamping, set sample lines and pixels */
-	val = (bclamp->start_pixel & CCDC_BLK_ST_PXL_MASK) |
-	      ((bclamp->sample_pixel & CCDC_BLK_SAMPLE_LN_MASK) <<
-		CCDC_BLK_SAMPLE_LN_SHIFT) | CCDC_BLK_CLAMP_ENABLE;
-	regw(val, CLAMP);
-
-	/* If Black clamping is enable then make dcsub 0 */
-	val = (bclamp->sample_ln & CCDC_NUM_LINE_CALC_MASK)
-			<< CCDC_NUM_LINE_CALC_SHIFT;
-	regw(val, DCSUB);
-}
-
-/*
- * ccdc_config_black_compense()
- * configure parameters for Black Compensation
- */
-static void ccdc_config_black_compense(struct ccdc_black_compensation *bcomp)
-{
-	u32 val;
-
-	val = (bcomp->b & CCDC_BLK_COMP_MASK) |
-		((bcomp->gb & CCDC_BLK_COMP_MASK) <<
-		CCDC_BLK_COMP_GB_COMP_SHIFT);
-	regw(val, BLKCMP1);
-
-	val = ((bcomp->gr & CCDC_BLK_COMP_MASK) <<
-		CCDC_BLK_COMP_GR_COMP_SHIFT) |
-		((bcomp->r & CCDC_BLK_COMP_MASK) <<
-		CCDC_BLK_COMP_R_COMP_SHIFT);
-	regw(val, BLKCMP0);
-}
-
-/*
- * ccdc_write_dfc_entry()
- * write an entry in the dfc table.
- */
-int ccdc_write_dfc_entry(int index, struct ccdc_vertical_dft *dfc)
-{
-/* TODO This is to be re-visited and adjusted */
-#define DFC_WRITE_WAIT_COUNT	1000
-	u32 val, count = DFC_WRITE_WAIT_COUNT;
-
-	regw(dfc->dft_corr_vert[index], DFCMEM0);
-	regw(dfc->dft_corr_horz[index], DFCMEM1);
-	regw(dfc->dft_corr_sub1[index], DFCMEM2);
-	regw(dfc->dft_corr_sub2[index], DFCMEM3);
-	regw(dfc->dft_corr_sub3[index], DFCMEM4);
-	/* set WR bit to write */
-	val = regr(DFCMEMCTL) | CCDC_DFCMEMCTL_DFCMWR_MASK;
-	regw(val, DFCMEMCTL);
-
-	/*
-	 * Assume, it is very short. If we get an error, we need to
-	 * adjust this value
-	 */
-	while (regr(DFCMEMCTL) & CCDC_DFCMEMCTL_DFCMWR_MASK)
-		count--;
-	/*
-	 * TODO We expect the count to be non-zero to be successful. Adjust
-	 * the count if write requires more time
-	 */
-
-	if (count) {
-		dev_err(ccdc_cfg.dev, "defect table write timeout !!!\n");
-		return -1;
-	}
-	return 0;
-}
-
-/*
- * ccdc_config_vdfc()
- * configure parameters for Vertical Defect Correction
- */
-static int ccdc_config_vdfc(struct ccdc_vertical_dft *dfc)
-{
-	u32 val;
-	int i;
-
-	/* Configure General Defect Correction. The table used is from IPIPE */
-	val = dfc->gen_dft_en & CCDC_DFCCTL_GDFCEN_MASK;
-
-	/* Configure Vertical Defect Correction if needed */
-	if (!dfc->ver_dft_en) {
-		/* Enable only General Defect Correction */
-		regw(val, DFCCTL);
-		return 0;
-	}
-
-	if (dfc->table_size > CCDC_DFT_TABLE_SIZE)
-		return -EINVAL;
-
-	val |= CCDC_DFCCTL_VDFC_DISABLE;
-	val |= (dfc->dft_corr_ctl.vdfcsl & CCDC_DFCCTL_VDFCSL_MASK) <<
-		CCDC_DFCCTL_VDFCSL_SHIFT;
-	val |= (dfc->dft_corr_ctl.vdfcuda & CCDC_DFCCTL_VDFCUDA_MASK) <<
-		CCDC_DFCCTL_VDFCUDA_SHIFT;
-	val |= (dfc->dft_corr_ctl.vdflsft & CCDC_DFCCTL_VDFLSFT_MASK) <<
-		CCDC_DFCCTL_VDFLSFT_SHIFT;
-	regw(val , DFCCTL);
-
-	/* clear address ptr to offset 0 */
-	val = CCDC_DFCMEMCTL_DFCMARST_MASK << CCDC_DFCMEMCTL_DFCMARST_SHIFT;
-
-	/* write defect table entries */
-	for (i = 0; i < dfc->table_size; i++) {
-		/* increment address for non zero index */
-		if (i != 0)
-			val = CCDC_DFCMEMCTL_INC_ADDR;
-		regw(val, DFCMEMCTL);
-		if (ccdc_write_dfc_entry(i, dfc) < 0)
-			return -EFAULT;
-	}
-
-	/* update saturation level and enable dfc */
-	regw(dfc->saturation_ctl & CCDC_VDC_DFCVSAT_MASK, DFCVSAT);
-	val = regr(DFCCTL) | (CCDC_DFCCTL_VDFCEN_MASK <<
-			CCDC_DFCCTL_VDFCEN_SHIFT);
-	regw(val, DFCCTL);
-	return 0;
-}
-
-/*
- * ccdc_config_csc()
- * configure parameters for color space conversion
- * Each register CSCM0-7 has two values in S8Q5 format.
- */
-static void ccdc_config_csc(struct ccdc_csc *csc)
-{
-	u32 val1, val2;
-	int i;
-
-	if (!csc->enable)
-		return;
-
-	/* Enable the CSC sub-module */
-	regw(CCDC_CSC_ENABLE, CSCCTL);
-
-	/* Converting the co-eff as per the format of the register */
-	for (i = 0; i < CCDC_CSC_COEFF_TABLE_SIZE; i++) {
-		if ((i % 2) == 0) {
-			/* CSCM - LSB */
-			val1 = (csc->coeff[i].integer &
-				CCDC_CSC_COEF_INTEG_MASK)
-				<< CCDC_CSC_COEF_INTEG_SHIFT;
-			/*
-			 * convert decimal part to binary. Use 2 decimal
-			 * precision, user values range from .00 - 0.99
-			 */
-			val1 |= (((csc->coeff[i].decimal &
-				CCDC_CSC_COEF_DECIMAL_MASK) *
-				CCDC_CSC_DEC_MAX) / 100);
-		} else {
-
-			/* CSCM - MSB */
-			val2 = (csc->coeff[i].integer &
-				CCDC_CSC_COEF_INTEG_MASK)
-				<< CCDC_CSC_COEF_INTEG_SHIFT;
-			val2 |= (((csc->coeff[i].decimal &
-				 CCDC_CSC_COEF_DECIMAL_MASK) *
-				 CCDC_CSC_DEC_MAX) / 100);
-			val2 <<= CCDC_CSCM_MSB_SHIFT;
-			val2 |= val1;
-			regw(val2, (CSCM0 + ((i - 1) << 1)));
-		}
-	}
-}
-
-/*
- * ccdc_config_color_patterns()
- * configure parameters for color patterns
- */
-static void ccdc_config_color_patterns(struct ccdc_col_pat *pat0,
-				       struct ccdc_col_pat *pat1)
-{
-	u32 val;
-
-	val = (pat0->olop | (pat0->olep << 2) | (pat0->elop << 4) |
-		(pat0->elep << 6) | (pat1->olop << 8) | (pat1->olep << 10) |
-		(pat1->elop << 12) | (pat1->elep << 14));
-	regw(val, COLPTN);
-}
-
-/* This function will configure CCDC for Raw mode image capture */
-static int ccdc_config_raw(void)
-{
-	struct ccdc_params_raw *params = &ccdc_cfg.bayer;
-	struct ccdc_config_params_raw *config_params =
-					&ccdc_cfg.bayer.config_params;
-	unsigned int val;
-
-	dev_dbg(ccdc_cfg.dev, "\nStarting ccdc_config_raw...");
-
-	/* restore power on defaults to register */
-	ccdc_restore_defaults();
-
-	/* CCDCFG register:
-	 * set CCD Not to swap input since input is RAW data
-	 * set FID detection function to Latch at V-Sync
-	 * set WENLOG - ccdc valid area to AND
-	 * set TRGSEL to WENBIT
-	 * set EXTRG to DISABLE
-	 * disable latching function on VSYNC - shadowed registers
-	 */
-	regw(CCDC_YCINSWP_RAW | CCDC_CCDCFG_FIDMD_LATCH_VSYNC |
-	     CCDC_CCDCFG_WENLOG_AND | CCDC_CCDCFG_TRGSEL_WEN |
-	     CCDC_CCDCFG_EXTRG_DISABLE | CCDC_LATCH_ON_VSYNC_DISABLE, CCDCFG);
-
-	/*
-	 * Set VDHD direction to input,  input type to raw input
-	 * normal data polarity, do not use external WEN
-	 */
-	val = (CCDC_VDHDOUT_INPUT | CCDC_RAW_IP_MODE | CCDC_DATAPOL_NORMAL |
-		CCDC_EXWEN_DISABLE);
-
-	/*
-	 * Configure the vertical sync polarity (MODESET.VDPOL), horizontal
-	 * sync polarity (MODESET.HDPOL), field id polarity (MODESET.FLDPOL),
-	 * frame format(progressive or interlace), & pixel format (Input mode)
-	 */
-	val |= (((params->vd_pol & CCDC_VD_POL_MASK) << CCDC_VD_POL_SHIFT) |
-		((params->hd_pol & CCDC_HD_POL_MASK) << CCDC_HD_POL_SHIFT) |
-		((params->fid_pol & CCDC_FID_POL_MASK) << CCDC_FID_POL_SHIFT) |
-		((params->frm_fmt & CCDC_FRM_FMT_MASK) << CCDC_FRM_FMT_SHIFT) |
-		((params->pix_fmt & CCDC_PIX_FMT_MASK) << CCDC_PIX_FMT_SHIFT));
-
-	/* set pack for alaw compression */
-	if ((config_params->data_sz == CCDC_DATA_8BITS) ||
-	     config_params->alaw.enable)
-		val |= CCDC_DATA_PACK_ENABLE;
-
-	/* Configure for LPF */
-	if (config_params->lpf_enable)
-		val |= (config_params->lpf_enable & CCDC_LPF_MASK) <<
-			CCDC_LPF_SHIFT;
-
-	/* Configure the data shift */
-	val |= (config_params->datasft & CCDC_DATASFT_MASK) <<
-		CCDC_DATASFT_SHIFT;
-	regw(val , MODESET);
-	dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to MODESET...\n", val);
-
-	/* Configure the Median Filter threshold */
-	regw((config_params->med_filt_thres) & CCDC_MED_FILT_THRESH, MEDFILT);
-
-	/* Configure GAMMAWD register. defaur 11-2, and Mosaic cfa pattern */
-	val = CCDC_GAMMA_BITS_11_2 << CCDC_GAMMAWD_INPUT_SHIFT |
-		CCDC_CFA_MOSAIC;
-
-	/* Enable and configure aLaw register if needed */
-	if (config_params->alaw.enable) {
-		val |= (CCDC_ALAW_ENABLE |
-			((config_params->alaw.gama_wd &
-			CCDC_ALAW_GAMA_WD_MASK) <<
-			CCDC_GAMMAWD_INPUT_SHIFT));
-	}
-
-	/* Configure Median filter1 & filter2 */
-	val |= ((config_params->mfilt1 << CCDC_MFILT1_SHIFT) |
-		(config_params->mfilt2 << CCDC_MFILT2_SHIFT));
-
-	regw(val, GAMMAWD);
-	dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to GAMMAWD...\n", val);
-
-	/* configure video window */
-	ccdc_setwin(&params->win, params->frm_fmt, 1);
-
-	/* Optical Clamp Averaging */
-	ccdc_config_black_clamp(&config_params->blk_clamp);
-
-	/* Black level compensation */
-	ccdc_config_black_compense(&config_params->blk_comp);
-
-	/* Vertical Defect Correction if needed */
-	if (ccdc_config_vdfc(&config_params->vertical_dft) < 0)
-		return -EFAULT;
-
-	/* color space conversion */
-	ccdc_config_csc(&config_params->csc);
-
-	/* color pattern */
-	ccdc_config_color_patterns(&config_params->col_pat_field0,
-				   &config_params->col_pat_field1);
-
-	/* Configure the Gain  & offset control */
-	ccdc_config_gain_offset();
-
-	dev_dbg(ccdc_cfg.dev, "\nWriting %x to COLPTN...\n", val);
-
-	/* Configure DATAOFST  register */
-	val = (config_params->data_offset.horz_offset & CCDC_DATAOFST_MASK) <<
-		CCDC_DATAOFST_H_SHIFT;
-	val |= (config_params->data_offset.vert_offset & CCDC_DATAOFST_MASK) <<
-		CCDC_DATAOFST_V_SHIFT;
-	regw(val, DATAOFST);
-
-	/* configuring HSIZE register */
-	val = (params->horz_flip_enable & CCDC_HSIZE_FLIP_MASK) <<
-		CCDC_HSIZE_FLIP_SHIFT;
-
-	/* If pack 8 is enable then 1 pixel will take 1 byte */
-	if ((config_params->data_sz == CCDC_DATA_8BITS) ||
-	     config_params->alaw.enable) {
-		val |= (((params->win.width) + 31) >> 5) &
-			CCDC_HSIZE_VAL_MASK;
-
-		/* adjust to multiple of 32 */
-		dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to HSIZE...\n",
-		       (((params->win.width) + 31) >> 5) &
-			CCDC_HSIZE_VAL_MASK);
-	} else {
-		/* else one pixel will take 2 byte */
-		val |= (((params->win.width * 2) + 31) >> 5) &
-			CCDC_HSIZE_VAL_MASK;
-
-		dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to HSIZE...\n",
-		       (((params->win.width * 2) + 31) >> 5) &
-			CCDC_HSIZE_VAL_MASK);
-	}
-	regw(val, HSIZE);
-
-	/* Configure SDOFST register */
-	if (params->frm_fmt == CCDC_FRMFMT_INTERLACED) {
-		if (params->image_invert_enable) {
-			/* For interlace inverse mode */
-			regw(CCDC_SDOFST_INTERLACE_INVERSE, SDOFST);
-			dev_dbg(ccdc_cfg.dev, "\nWriting %x to SDOFST...\n",
-				CCDC_SDOFST_INTERLACE_INVERSE);
-		} else {
-			/* For interlace non inverse mode */
-			regw(CCDC_SDOFST_INTERLACE_NORMAL, SDOFST);
-			dev_dbg(ccdc_cfg.dev, "\nWriting %x to SDOFST...\n",
-				CCDC_SDOFST_INTERLACE_NORMAL);
-		}
-	} else if (params->frm_fmt == CCDC_FRMFMT_PROGRESSIVE) {
-		if (params->image_invert_enable) {
-			/* For progessive inverse mode */
-			regw(CCDC_SDOFST_PROGRESSIVE_INVERSE, SDOFST);
-			dev_dbg(ccdc_cfg.dev, "\nWriting %x to SDOFST...\n",
-				CCDC_SDOFST_PROGRESSIVE_INVERSE);
-		} else {
-			/* For progessive non inverse mode */
-			regw(CCDC_SDOFST_PROGRESSIVE_NORMAL, SDOFST);
-			dev_dbg(ccdc_cfg.dev, "\nWriting %x to SDOFST...\n",
-				CCDC_SDOFST_PROGRESSIVE_NORMAL);
-		}
-	}
-	dev_dbg(ccdc_cfg.dev, "\nend of ccdc_config_raw...");
-	return 0;
-}
-
-static int ccdc_configure(void)
-{
-	if (ccdc_cfg.if_type == VPFE_RAW_BAYER)
-		return ccdc_config_raw();
-	else
-		ccdc_config_ycbcr();
-	return 0;
-}
-
-static int ccdc_set_buftype(enum ccdc_buftype buf_type)
-{
-	if (ccdc_cfg.if_type == VPFE_RAW_BAYER)
-		ccdc_cfg.bayer.buf_type = buf_type;
-	else
-		ccdc_cfg.ycbcr.buf_type = buf_type;
-	return 0;
-}
-static enum ccdc_buftype ccdc_get_buftype(void)
-{
-	if (ccdc_cfg.if_type == VPFE_RAW_BAYER)
-		return ccdc_cfg.bayer.buf_type;
-	return ccdc_cfg.ycbcr.buf_type;
-}
-
-static int ccdc_enum_pix(u32 *pix, int i)
-{
-	int ret = -EINVAL;
-	if (ccdc_cfg.if_type == VPFE_RAW_BAYER) {
-		if (i < ARRAY_SIZE(ccdc_raw_bayer_pix_formats)) {
-			*pix = ccdc_raw_bayer_pix_formats[i];
-			ret = 0;
-		}
-	} else {
-		if (i < ARRAY_SIZE(ccdc_raw_yuv_pix_formats)) {
-			*pix = ccdc_raw_yuv_pix_formats[i];
-			ret = 0;
-		}
-	}
-	return ret;
-}
-
-static int ccdc_set_pixel_format(u32 pixfmt)
-{
-	struct ccdc_a_law *alaw = &ccdc_cfg.bayer.config_params.alaw;
-
-	if (ccdc_cfg.if_type == VPFE_RAW_BAYER) {
-		ccdc_cfg.bayer.pix_fmt = CCDC_PIXFMT_RAW;
-		if (pixfmt == V4L2_PIX_FMT_SBGGR8)
-			alaw->enable = 1;
-		else if (pixfmt != V4L2_PIX_FMT_SBGGR16)
-			return -EINVAL;
-	} else {
-		if (pixfmt == V4L2_PIX_FMT_YUYV)
-			ccdc_cfg.ycbcr.pix_order = CCDC_PIXORDER_YCBYCR;
-		else if (pixfmt == V4L2_PIX_FMT_UYVY)
-			ccdc_cfg.ycbcr.pix_order = CCDC_PIXORDER_CBYCRY;
-		else
-			return -EINVAL;
-	}
-	return 0;
-}
-static u32 ccdc_get_pixel_format(void)
-{
-	struct ccdc_a_law *alaw = &ccdc_cfg.bayer.config_params.alaw;
-	u32 pixfmt;
-
-	if (ccdc_cfg.if_type == VPFE_RAW_BAYER)
-		if (alaw->enable)
-			pixfmt = V4L2_PIX_FMT_SBGGR8;
-		else
-			pixfmt = V4L2_PIX_FMT_SBGGR16;
-	else {
-		if (ccdc_cfg.ycbcr.pix_order == CCDC_PIXORDER_YCBYCR)
-			pixfmt = V4L2_PIX_FMT_YUYV;
-		else
-			pixfmt = V4L2_PIX_FMT_UYVY;
-	}
-	return pixfmt;
-}
-static int ccdc_set_image_window(struct v4l2_rect *win)
-{
-	if (ccdc_cfg.if_type == VPFE_RAW_BAYER)
-		ccdc_cfg.bayer.win = *win;
-	else
-		ccdc_cfg.ycbcr.win = *win;
-	return 0;
-}
-
-static void ccdc_get_image_window(struct v4l2_rect *win)
-{
-	if (ccdc_cfg.if_type == VPFE_RAW_BAYER)
-		*win = ccdc_cfg.bayer.win;
-	else
-		*win = ccdc_cfg.ycbcr.win;
-}
-
-static unsigned int ccdc_get_line_length(void)
-{
-	struct ccdc_config_params_raw *config_params =
-				&ccdc_cfg.bayer.config_params;
-	unsigned int len;
-
-	if (ccdc_cfg.if_type == VPFE_RAW_BAYER) {
-		if ((config_params->alaw.enable) ||
-		    (config_params->data_sz == CCDC_DATA_8BITS))
-			len = ccdc_cfg.bayer.win.width;
-		else
-			len = ccdc_cfg.bayer.win.width * 2;
-	} else
-		len = ccdc_cfg.ycbcr.win.width * 2;
-	return ALIGN(len, 32);
-}
-
-static int ccdc_set_frame_format(enum ccdc_frmfmt frm_fmt)
-{
-	if (ccdc_cfg.if_type == VPFE_RAW_BAYER)
-		ccdc_cfg.bayer.frm_fmt = frm_fmt;
-	else
-		ccdc_cfg.ycbcr.frm_fmt = frm_fmt;
-	return 0;
-}
-
-static enum ccdc_frmfmt ccdc_get_frame_format(void)
-{
-	if (ccdc_cfg.if_type == VPFE_RAW_BAYER)
-		return ccdc_cfg.bayer.frm_fmt;
-	else
-		return ccdc_cfg.ycbcr.frm_fmt;
-}
-
-static int ccdc_getfid(void)
-{
-	return  (regr(MODESET) >> 15) & 1;
-}
-
-/* misc operations */
-static inline void ccdc_setfbaddr(unsigned long addr)
-{
-	regw((addr >> 21) & 0x007f, STADRH);
-	regw((addr >> 5) & 0x0ffff, STADRL);
-}
-
-static int ccdc_set_hw_if_params(struct vpfe_hw_if_param *params)
-{
-	ccdc_cfg.if_type = params->if_type;
-
-	switch (params->if_type) {
-	case VPFE_BT656:
-	case VPFE_YCBCR_SYNC_16:
-	case VPFE_YCBCR_SYNC_8:
-		ccdc_cfg.ycbcr.vd_pol = params->vdpol;
-		ccdc_cfg.ycbcr.hd_pol = params->hdpol;
-		break;
-	default:
-		/* TODO add support for raw bayer here */
-		return -EINVAL;
-	}
-	return 0;
-}
-
-static struct ccdc_hw_device ccdc_hw_dev = {
-	.name = "DM355 CCDC",
-	.owner = THIS_MODULE,
-	.hw_ops = {
-		.open = ccdc_open,
-		.close = ccdc_close,
-		.enable = ccdc_enable,
-		.enable_out_to_sdram = ccdc_enable_output_to_sdram,
-		.set_hw_if_params = ccdc_set_hw_if_params,
-		.set_params = ccdc_set_params,
-		.configure = ccdc_configure,
-		.set_buftype = ccdc_set_buftype,
-		.get_buftype = ccdc_get_buftype,
-		.enum_pix = ccdc_enum_pix,
-		.set_pixel_format = ccdc_set_pixel_format,
-		.get_pixel_format = ccdc_get_pixel_format,
-		.set_frame_format = ccdc_set_frame_format,
-		.get_frame_format = ccdc_get_frame_format,
-		.set_image_window = ccdc_set_image_window,
-		.get_image_window = ccdc_get_image_window,
-		.get_line_length = ccdc_get_line_length,
-		.setfbaddr = ccdc_setfbaddr,
-		.getfid = ccdc_getfid,
-	},
-};
-
-static int __devinit dm355_ccdc_probe(struct platform_device *pdev)
-{
-	void (*setup_pinmux)(void);
-	struct resource	*res;
-	int status = 0;
-
-	/*
-	 * first try to register with vpfe. If not correct platform, then we
-	 * don't have to iomap
-	 */
-	status = vpfe_register_ccdc_device(&ccdc_hw_dev);
-	if (status < 0)
-		return status;
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!res) {
-		status = -ENODEV;
-		goto fail_nores;
-	}
-
-	res = request_mem_region(res->start, resource_size(res), res->name);
-	if (!res) {
-		status = -EBUSY;
-		goto fail_nores;
-	}
-
-	ccdc_cfg.base_addr = ioremap_nocache(res->start, resource_size(res));
-	if (!ccdc_cfg.base_addr) {
-		status = -ENOMEM;
-		goto fail_nomem;
-	}
-
-	/* Get and enable Master clock */
-	ccdc_cfg.mclk = clk_get(&pdev->dev, "master");
-	if (IS_ERR(ccdc_cfg.mclk)) {
-		status = PTR_ERR(ccdc_cfg.mclk);
-		goto fail_nomap;
-	}
-	if (clk_enable(ccdc_cfg.mclk)) {
-		status = -ENODEV;
-		goto fail_mclk;
-	}
-
-	/* Get and enable Slave clock */
-	ccdc_cfg.sclk = clk_get(&pdev->dev, "slave");
-	if (IS_ERR(ccdc_cfg.sclk)) {
-		status = PTR_ERR(ccdc_cfg.sclk);
-		goto fail_mclk;
-	}
-	if (clk_enable(ccdc_cfg.sclk)) {
-		status = -ENODEV;
-		goto fail_sclk;
-	}
-
-	/* Platform data holds setup_pinmux function ptr */
-	if (NULL == pdev->dev.platform_data) {
-		status = -ENODEV;
-		goto fail_sclk;
-	}
-	setup_pinmux = pdev->dev.platform_data;
-	/*
-	 * setup Mux configuration for ccdc which may be different for
-	 * different SoCs using this CCDC
-	 */
-	setup_pinmux();
-	ccdc_cfg.dev = &pdev->dev;
-	printk(KERN_NOTICE "%s is registered with vpfe.\n", ccdc_hw_dev.name);
-	return 0;
-fail_sclk:
-	clk_put(ccdc_cfg.sclk);
-fail_mclk:
-	clk_put(ccdc_cfg.mclk);
-fail_nomap:
-	iounmap(ccdc_cfg.base_addr);
-fail_nomem:
-	release_mem_region(res->start, resource_size(res));
-fail_nores:
-	vpfe_unregister_ccdc_device(&ccdc_hw_dev);
-	return status;
-}
-
-static int dm355_ccdc_remove(struct platform_device *pdev)
-{
-	struct resource	*res;
-
-	clk_put(ccdc_cfg.mclk);
-	clk_put(ccdc_cfg.sclk);
-	iounmap(ccdc_cfg.base_addr);
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (res)
-		release_mem_region(res->start, resource_size(res));
-	vpfe_unregister_ccdc_device(&ccdc_hw_dev);
-	return 0;
-}
-
-static struct platform_driver dm355_ccdc_driver = {
-	.driver = {
-		.name	= "dm355_ccdc",
-		.owner = THIS_MODULE,
-	},
-	.remove = __devexit_p(dm355_ccdc_remove),
-	.probe = dm355_ccdc_probe,
-};
-
-module_platform_driver(dm355_ccdc_driver);
diff --git a/drivers/media/video/davinci/dm355_ccdc_regs.h b/drivers/media/video/davinci/dm355_ccdc_regs.h
deleted file mode 100644
index d6d2ef0533b..00000000000
--- a/drivers/media/video/davinci/dm355_ccdc_regs.h
+++ /dev/null
@@ -1,310 +0,0 @@
-/*
- * Copyright (C) 2005-2009 Texas Instruments Inc
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef _DM355_CCDC_REGS_H
-#define _DM355_CCDC_REGS_H
-
-/**************************************************************************\
-* Register OFFSET Definitions
-\**************************************************************************/
-#define SYNCEN				0x00
-#define MODESET				0x04
-#define HDWIDTH				0x08
-#define VDWIDTH				0x0c
-#define PPLN				0x10
-#define LPFR				0x14
-#define SPH				0x18
-#define NPH				0x1c
-#define SLV0				0x20
-#define SLV1				0x24
-#define NLV				0x28
-#define CULH				0x2c
-#define CULV				0x30
-#define HSIZE				0x34
-#define SDOFST				0x38
-#define STADRH				0x3c
-#define STADRL				0x40
-#define CLAMP				0x44
-#define DCSUB				0x48
-#define COLPTN				0x4c
-#define BLKCMP0				0x50
-#define BLKCMP1				0x54
-#define MEDFILT				0x58
-#define RYEGAIN				0x5c
-#define GRCYGAIN			0x60
-#define GBGGAIN				0x64
-#define BMGGAIN				0x68
-#define OFFSET				0x6c
-#define OUTCLIP				0x70
-#define VDINT0				0x74
-#define VDINT1				0x78
-#define RSV0				0x7c
-#define GAMMAWD				0x80
-#define REC656IF			0x84
-#define CCDCFG				0x88
-#define FMTCFG				0x8c
-#define FMTPLEN				0x90
-#define FMTSPH				0x94
-#define FMTLNH				0x98
-#define FMTSLV				0x9c
-#define FMTLNV				0xa0
-#define FMTRLEN				0xa4
-#define FMTHCNT				0xa8
-#define FMT_ADDR_PTR_B			0xac
-#define FMT_ADDR_PTR(i)			(FMT_ADDR_PTR_B + (i * 4))
-#define FMTPGM_VF0			0xcc
-#define FMTPGM_VF1			0xd0
-#define FMTPGM_AP0			0xd4
-#define FMTPGM_AP1			0xd8
-#define FMTPGM_AP2			0xdc
-#define FMTPGM_AP3                      0xe0
-#define FMTPGM_AP4                      0xe4
-#define FMTPGM_AP5                      0xe8
-#define FMTPGM_AP6                      0xec
-#define FMTPGM_AP7                      0xf0
-#define LSCCFG1                         0xf4
-#define LSCCFG2                         0xf8
-#define LSCH0                           0xfc
-#define LSCV0                           0x100
-#define LSCKH                           0x104
-#define LSCKV                           0x108
-#define LSCMEMCTL                       0x10c
-#define LSCMEMD                         0x110
-#define LSCMEMQ                         0x114
-#define DFCCTL                          0x118
-#define DFCVSAT                         0x11c
-#define DFCMEMCTL                       0x120
-#define DFCMEM0                         0x124
-#define DFCMEM1                         0x128
-#define DFCMEM2                         0x12c
-#define DFCMEM3                         0x130
-#define DFCMEM4                         0x134
-#define CSCCTL                          0x138
-#define CSCM0                           0x13c
-#define CSCM1                           0x140
-#define CSCM2                           0x144
-#define CSCM3                           0x148
-#define CSCM4                           0x14c
-#define CSCM5                           0x150
-#define CSCM6                           0x154
-#define CSCM7                           0x158
-#define DATAOFST			0x15c
-#define CCDC_REG_LAST			DATAOFST
-/**************************************************************
-*	Define for various register bit mask and shifts for CCDC
-*
-**************************************************************/
-#define CCDC_RAW_IP_MODE			0
-#define CCDC_VDHDOUT_INPUT			0
-#define CCDC_YCINSWP_RAW			(0 << 4)
-#define CCDC_EXWEN_DISABLE 			0
-#define CCDC_DATAPOL_NORMAL			0
-#define CCDC_CCDCFG_FIDMD_LATCH_VSYNC		0
-#define CCDC_CCDCFG_FIDMD_NO_LATCH_VSYNC	(1 << 6)
-#define CCDC_CCDCFG_WENLOG_AND			0
-#define CCDC_CCDCFG_TRGSEL_WEN			0
-#define CCDC_CCDCFG_EXTRG_DISABLE		0
-#define CCDC_CFA_MOSAIC				0
-#define CCDC_Y8POS_SHIFT			11
-
-#define CCDC_VDC_DFCVSAT_MASK			0x3fff
-#define CCDC_DATAOFST_MASK			0x0ff
-#define CCDC_DATAOFST_H_SHIFT			0
-#define CCDC_DATAOFST_V_SHIFT			8
-#define CCDC_GAMMAWD_CFA_MASK			1
-#define CCDC_GAMMAWD_CFA_SHIFT			5
-#define CCDC_GAMMAWD_INPUT_SHIFT		2
-#define CCDC_FID_POL_MASK			1
-#define CCDC_FID_POL_SHIFT			4
-#define CCDC_HD_POL_MASK			1
-#define CCDC_HD_POL_SHIFT			3
-#define CCDC_VD_POL_MASK			1
-#define CCDC_VD_POL_SHIFT			2
-#define CCDC_VD_POL_NEGATIVE			(1 << 2)
-#define CCDC_FRM_FMT_MASK			1
-#define CCDC_FRM_FMT_SHIFT			7
-#define CCDC_DATA_SZ_MASK			7
-#define CCDC_DATA_SZ_SHIFT			8
-#define CCDC_VDHDOUT_MASK			1
-#define CCDC_VDHDOUT_SHIFT			0
-#define CCDC_EXWEN_MASK				1
-#define CCDC_EXWEN_SHIFT			5
-#define CCDC_INPUT_MODE_MASK			3
-#define CCDC_INPUT_MODE_SHIFT			12
-#define CCDC_PIX_FMT_MASK			3
-#define CCDC_PIX_FMT_SHIFT			12
-#define CCDC_DATAPOL_MASK			1
-#define CCDC_DATAPOL_SHIFT			6
-#define CCDC_WEN_ENABLE				(1 << 1)
-#define CCDC_VDHDEN_ENABLE			(1 << 16)
-#define CCDC_LPF_ENABLE				(1 << 14)
-#define CCDC_ALAW_ENABLE			1
-#define CCDC_ALAW_GAMA_WD_MASK			7
-#define CCDC_REC656IF_BT656_EN			3
-
-#define CCDC_FMTCFG_FMTMODE_MASK 		3
-#define CCDC_FMTCFG_FMTMODE_SHIFT		1
-#define CCDC_FMTCFG_LNUM_MASK			3
-#define CCDC_FMTCFG_LNUM_SHIFT			4
-#define CCDC_FMTCFG_ADDRINC_MASK		7
-#define CCDC_FMTCFG_ADDRINC_SHIFT		8
-
-#define CCDC_CCDCFG_FIDMD_SHIFT			6
-#define	CCDC_CCDCFG_WENLOG_SHIFT		8
-#define CCDC_CCDCFG_TRGSEL_SHIFT		9
-#define CCDC_CCDCFG_EXTRG_SHIFT			10
-#define CCDC_CCDCFG_MSBINVI_SHIFT		13
-
-#define CCDC_HSIZE_FLIP_SHIFT			12
-#define CCDC_HSIZE_FLIP_MASK			1
-#define CCDC_HSIZE_VAL_MASK			0xFFF
-#define CCDC_SDOFST_FIELD_INTERLEAVED		0x249
-#define CCDC_SDOFST_INTERLACE_INVERSE		0x4B6D
-#define CCDC_SDOFST_INTERLACE_NORMAL		0x0B6D
-#define CCDC_SDOFST_PROGRESSIVE_INVERSE		0x4000
-#define CCDC_SDOFST_PROGRESSIVE_NORMAL		0
-#define CCDC_START_PX_HOR_MASK			0x7FFF
-#define CCDC_NUM_PX_HOR_MASK			0x7FFF
-#define CCDC_START_VER_ONE_MASK			0x7FFF
-#define CCDC_START_VER_TWO_MASK			0x7FFF
-#define CCDC_NUM_LINES_VER			0x7FFF
-
-#define CCDC_BLK_CLAMP_ENABLE			(1 << 15)
-#define CCDC_BLK_SGAIN_MASK			0x1F
-#define CCDC_BLK_ST_PXL_MASK			0x1FFF
-#define CCDC_BLK_SAMPLE_LN_MASK			3
-#define CCDC_BLK_SAMPLE_LN_SHIFT		13
-
-#define CCDC_NUM_LINE_CALC_MASK			3
-#define CCDC_NUM_LINE_CALC_SHIFT		14
-
-#define CCDC_BLK_DC_SUB_MASK			0x3FFF
-#define CCDC_BLK_COMP_MASK			0xFF
-#define CCDC_BLK_COMP_GB_COMP_SHIFT		8
-#define CCDC_BLK_COMP_GR_COMP_SHIFT		0
-#define CCDC_BLK_COMP_R_COMP_SHIFT		8
-#define CCDC_LATCH_ON_VSYNC_DISABLE		(1 << 15)
-#define CCDC_LATCH_ON_VSYNC_ENABLE		(0 << 15)
-#define CCDC_FPC_ENABLE				(1 << 15)
-#define CCDC_FPC_FPC_NUM_MASK 			0x7FFF
-#define CCDC_DATA_PACK_ENABLE			(1 << 11)
-#define CCDC_FMT_HORZ_FMTLNH_MASK		0x1FFF
-#define CCDC_FMT_HORZ_FMTSPH_MASK		0x1FFF
-#define CCDC_FMT_HORZ_FMTSPH_SHIFT		16
-#define CCDC_FMT_VERT_FMTLNV_MASK		0x1FFF
-#define CCDC_FMT_VERT_FMTSLV_MASK		0x1FFF
-#define CCDC_FMT_VERT_FMTSLV_SHIFT		16
-#define CCDC_VP_OUT_VERT_NUM_MASK		0x3FFF
-#define CCDC_VP_OUT_VERT_NUM_SHIFT		17
-#define CCDC_VP_OUT_HORZ_NUM_MASK		0x1FFF
-#define CCDC_VP_OUT_HORZ_NUM_SHIFT		4
-#define CCDC_VP_OUT_HORZ_ST_MASK		0xF
-
-#define CCDC_CSC_COEF_INTEG_MASK		7
-#define CCDC_CSC_COEF_DECIMAL_MASK		0x1f
-#define CCDC_CSC_COEF_INTEG_SHIFT		5
-#define CCDC_CSCM_MSB_SHIFT			8
-#define CCDC_CSC_ENABLE				1
-#define CCDC_CSC_DEC_MAX			32
-
-#define CCDC_MFILT1_SHIFT			10
-#define CCDC_MFILT2_SHIFT			8
-#define CCDC_MED_FILT_THRESH			0x3FFF
-#define CCDC_LPF_MASK				1
-#define CCDC_LPF_SHIFT				14
-#define CCDC_OFFSET_MASK			0x3FF
-#define CCDC_DATASFT_MASK			7
-#define CCDC_DATASFT_SHIFT			8
-
-#define CCDC_DF_ENABLE				1
-
-#define CCDC_FMTPLEN_P0_MASK			0xF
-#define CCDC_FMTPLEN_P1_MASK			0xF
-#define CCDC_FMTPLEN_P2_MASK			7
-#define CCDC_FMTPLEN_P3_MASK			7
-#define CCDC_FMTPLEN_P0_SHIFT			0
-#define CCDC_FMTPLEN_P1_SHIFT			4
-#define CCDC_FMTPLEN_P2_SHIFT			8
-#define CCDC_FMTPLEN_P3_SHIFT			12
-
-#define CCDC_FMTSPH_MASK			0x1FFF
-#define CCDC_FMTLNH_MASK			0x1FFF
-#define CCDC_FMTSLV_MASK			0x1FFF
-#define CCDC_FMTLNV_MASK			0x7FFF
-#define CCDC_FMTRLEN_MASK			0x1FFF
-#define CCDC_FMTHCNT_MASK			0x1FFF
-
-#define CCDC_ADP_INIT_MASK			0x1FFF
-#define CCDC_ADP_LINE_SHIFT			13
-#define CCDC_ADP_LINE_MASK			3
-#define CCDC_FMTPGN_APTR_MASK			7
-
-#define CCDC_DFCCTL_GDFCEN_MASK			1
-#define CCDC_DFCCTL_VDFCEN_MASK			1
-#define CCDC_DFCCTL_VDFC_DISABLE		(0 << 4)
-#define CCDC_DFCCTL_VDFCEN_SHIFT		4
-#define CCDC_DFCCTL_VDFCSL_MASK			3
-#define CCDC_DFCCTL_VDFCSL_SHIFT		5
-#define CCDC_DFCCTL_VDFCUDA_MASK		1
-#define CCDC_DFCCTL_VDFCUDA_SHIFT		7
-#define CCDC_DFCCTL_VDFLSFT_MASK		3
-#define CCDC_DFCCTL_VDFLSFT_SHIFT		8
-#define CCDC_DFCMEMCTL_DFCMARST_MASK		1
-#define CCDC_DFCMEMCTL_DFCMARST_SHIFT		2
-#define CCDC_DFCMEMCTL_DFCMWR_MASK		1
-#define CCDC_DFCMEMCTL_DFCMWR_SHIFT		0
-#define CCDC_DFCMEMCTL_INC_ADDR			(0 << 2)
-
-#define CCDC_LSCCFG_GFTSF_MASK			7
-#define CCDC_LSCCFG_GFTSF_SHIFT			1
-#define CCDC_LSCCFG_GFTINV_MASK			0xf
-#define CCDC_LSCCFG_GFTINV_SHIFT		4
-#define CCDC_LSC_GFTABLE_SEL_MASK		3
-#define CCDC_LSC_GFTABLE_EPEL_SHIFT		8
-#define CCDC_LSC_GFTABLE_OPEL_SHIFT		10
-#define CCDC_LSC_GFTABLE_EPOL_SHIFT		12
-#define CCDC_LSC_GFTABLE_OPOL_SHIFT		14
-#define CCDC_LSC_GFMODE_MASK			3
-#define CCDC_LSC_GFMODE_SHIFT			4
-#define CCDC_LSC_DISABLE			0
-#define CCDC_LSC_ENABLE				1
-#define CCDC_LSC_TABLE1_SLC			0
-#define CCDC_LSC_TABLE2_SLC			1
-#define CCDC_LSC_TABLE3_SLC			2
-#define CCDC_LSC_MEMADDR_RESET			(1 << 2)
-#define CCDC_LSC_MEMADDR_INCR			(0 << 2)
-#define CCDC_LSC_FRAC_MASK_T1			0xFF
-#define CCDC_LSC_INT_MASK			3
-#define CCDC_LSC_FRAC_MASK			0x3FFF
-#define CCDC_LSC_CENTRE_MASK			0x3FFF
-#define CCDC_LSC_COEF_MASK			0xff
-#define CCDC_LSC_COEFL_SHIFT			0
-#define CCDC_LSC_COEFU_SHIFT			8
-#define CCDC_GAIN_MASK				0x7FF
-#define CCDC_SYNCEN_VDHDEN_MASK			(1 << 0)
-#define CCDC_SYNCEN_WEN_MASK			(1 << 1)
-#define CCDC_SYNCEN_WEN_SHIFT			1
-
-/* Power on Defaults in hardware */
-#define MODESET_DEFAULT				0x200
-#define CULH_DEFAULT				0xFFFF
-#define CULV_DEFAULT				0xFF
-#define GAIN_DEFAULT				256
-#define OUTCLIP_DEFAULT				0x3FFF
-#define LSCCFG2_DEFAULT				0xE
-
-#endif
diff --git a/drivers/media/video/davinci/dm644x_ccdc.c b/drivers/media/video/davinci/dm644x_ccdc.c
deleted file mode 100644
index ee7942b1996..00000000000
--- a/drivers/media/video/davinci/dm644x_ccdc.c
+++ /dev/null
@@ -1,1081 +0,0 @@
-/*
- * Copyright (C) 2006-2009 Texas Instruments Inc
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- * CCDC hardware module for DM6446
- * ------------------------------
- *
- * This module is for configuring CCD controller of DM6446 VPFE to capture
- * Raw yuv or Bayer RGB data from a decoder. CCDC has several modules
- * such as Defect Pixel Correction, Color Space Conversion etc to
- * pre-process the Raw Bayer RGB data, before writing it to SDRAM. This
- * module also allows application to configure individual
- * module parameters through VPFE_CMD_S_CCDC_RAW_PARAMS IOCTL.
- * To do so, application includes dm644x_ccdc.h and vpfe_capture.h header
- * files.  The setparams() API is called by vpfe_capture driver
- * to configure module parameters. This file is named DM644x so that other
- * variants such DM6443 may be supported using the same module.
- *
- * TODO: Test Raw bayer parameter settings and bayer capture
- * 	 Split module parameter structure to module specific ioctl structs
- * 	 investigate if enum used for user space type definition
- * 	 to be replaced by #defines or integer
- */
-#include <linux/platform_device.h>
-#include <linux/uaccess.h>
-#include <linux/videodev2.h>
-#include <linux/gfp.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/module.h>
-
-#include <media/davinci/dm644x_ccdc.h>
-#include <media/davinci/vpss.h>
-
-#include "dm644x_ccdc_regs.h"
-#include "ccdc_hw_device.h"
-
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("CCDC Driver for DM6446");
-MODULE_AUTHOR("Texas Instruments");
-
-static struct ccdc_oper_config {
-	struct device *dev;
-	/* CCDC interface type */
-	enum vpfe_hw_if_type if_type;
-	/* Raw Bayer configuration */
-	struct ccdc_params_raw bayer;
-	/* YCbCr configuration */
-	struct ccdc_params_ycbcr ycbcr;
-	/* Master clock */
-	struct clk *mclk;
-	/* slave clock */
-	struct clk *sclk;
-	/* ccdc base address */
-	void __iomem *base_addr;
-} ccdc_cfg = {
-	/* Raw configurations */
-	.bayer = {
-		.pix_fmt = CCDC_PIXFMT_RAW,
-		.frm_fmt = CCDC_FRMFMT_PROGRESSIVE,
-		.win = CCDC_WIN_VGA,
-		.fid_pol = VPFE_PINPOL_POSITIVE,
-		.vd_pol = VPFE_PINPOL_POSITIVE,
-		.hd_pol = VPFE_PINPOL_POSITIVE,
-		.config_params = {
-			.data_sz = CCDC_DATA_10BITS,
-		},
-	},
-	.ycbcr = {
-		.pix_fmt = CCDC_PIXFMT_YCBCR_8BIT,
-		.frm_fmt = CCDC_FRMFMT_INTERLACED,
-		.win = CCDC_WIN_PAL,
-		.fid_pol = VPFE_PINPOL_POSITIVE,
-		.vd_pol = VPFE_PINPOL_POSITIVE,
-		.hd_pol = VPFE_PINPOL_POSITIVE,
-		.bt656_enable = 1,
-		.pix_order = CCDC_PIXORDER_CBYCRY,
-		.buf_type = CCDC_BUFTYPE_FLD_INTERLEAVED
-	},
-};
-
-#define CCDC_MAX_RAW_YUV_FORMATS	2
-
-/* Raw Bayer formats */
-static u32 ccdc_raw_bayer_pix_formats[] =
-	{V4L2_PIX_FMT_SBGGR8, V4L2_PIX_FMT_SBGGR16};
-
-/* Raw YUV formats */
-static u32 ccdc_raw_yuv_pix_formats[] =
-	{V4L2_PIX_FMT_UYVY, V4L2_PIX_FMT_YUYV};
-
-/* CCDC Save/Restore context */
-static u32 ccdc_ctx[CCDC_REG_END / sizeof(u32)];
-
-/* register access routines */
-static inline u32 regr(u32 offset)
-{
-	return __raw_readl(ccdc_cfg.base_addr + offset);
-}
-
-static inline void regw(u32 val, u32 offset)
-{
-	__raw_writel(val, ccdc_cfg.base_addr + offset);
-}
-
-static void ccdc_enable(int flag)
-{
-	regw(flag, CCDC_PCR);
-}
-
-static void ccdc_enable_vport(int flag)
-{
-	if (flag)
-		/* enable video port */
-		regw(CCDC_ENABLE_VIDEO_PORT, CCDC_FMTCFG);
-	else
-		regw(CCDC_DISABLE_VIDEO_PORT, CCDC_FMTCFG);
-}
-
-/*
- * ccdc_setwin()
- * This function will configure the window size
- * to be capture in CCDC reg
- */
-void ccdc_setwin(struct v4l2_rect *image_win,
-		enum ccdc_frmfmt frm_fmt,
-		int ppc)
-{
-	int horz_start, horz_nr_pixels;
-	int vert_start, vert_nr_lines;
-	int val = 0, mid_img = 0;
-
-	dev_dbg(ccdc_cfg.dev, "\nStarting ccdc_setwin...");
-	/*
-	 * ppc - per pixel count. indicates how many pixels per cell
-	 * output to SDRAM. example, for ycbcr, it is one y and one c, so 2.
-	 * raw capture this is 1
-	 */
-	horz_start = image_win->left << (ppc - 1);
-	horz_nr_pixels = (image_win->width << (ppc - 1)) - 1;
-	regw((horz_start << CCDC_HORZ_INFO_SPH_SHIFT) | horz_nr_pixels,
-	     CCDC_HORZ_INFO);
-
-	vert_start = image_win->top;
-
-	if (frm_fmt == CCDC_FRMFMT_INTERLACED) {
-		vert_nr_lines = (image_win->height >> 1) - 1;
-		vert_start >>= 1;
-		/* Since first line doesn't have any data */
-		vert_start += 1;
-		/* configure VDINT0 */
-		val = (vert_start << CCDC_VDINT_VDINT0_SHIFT);
-		regw(val, CCDC_VDINT);
-
-	} else {
-		/* Since first line doesn't have any data */
-		vert_start += 1;
-		vert_nr_lines = image_win->height - 1;
-		/*
-		 * configure VDINT0 and VDINT1. VDINT1 will be at half
-		 * of image height
-		 */
-		mid_img = vert_start + (image_win->height / 2);
-		val = (vert_start << CCDC_VDINT_VDINT0_SHIFT) |
-		    (mid_img & CCDC_VDINT_VDINT1_MASK);
-		regw(val, CCDC_VDINT);
-
-	}
-	regw((vert_start << CCDC_VERT_START_SLV0_SHIFT) | vert_start,
-	     CCDC_VERT_START);
-	regw(vert_nr_lines, CCDC_VERT_LINES);
-	dev_dbg(ccdc_cfg.dev, "\nEnd of ccdc_setwin...");
-}
-
-static void ccdc_readregs(void)
-{
-	unsigned int val = 0;
-
-	val = regr(CCDC_ALAW);
-	dev_notice(ccdc_cfg.dev, "\nReading 0x%x to ALAW...\n", val);
-	val = regr(CCDC_CLAMP);
-	dev_notice(ccdc_cfg.dev, "\nReading 0x%x to CLAMP...\n", val);
-	val = regr(CCDC_DCSUB);
-	dev_notice(ccdc_cfg.dev, "\nReading 0x%x to DCSUB...\n", val);
-	val = regr(CCDC_BLKCMP);
-	dev_notice(ccdc_cfg.dev, "\nReading 0x%x to BLKCMP...\n", val);
-	val = regr(CCDC_FPC_ADDR);
-	dev_notice(ccdc_cfg.dev, "\nReading 0x%x to FPC_ADDR...\n", val);
-	val = regr(CCDC_FPC);
-	dev_notice(ccdc_cfg.dev, "\nReading 0x%x to FPC...\n", val);
-	val = regr(CCDC_FMTCFG);
-	dev_notice(ccdc_cfg.dev, "\nReading 0x%x to FMTCFG...\n", val);
-	val = regr(CCDC_COLPTN);
-	dev_notice(ccdc_cfg.dev, "\nReading 0x%x to COLPTN...\n", val);
-	val = regr(CCDC_FMT_HORZ);
-	dev_notice(ccdc_cfg.dev, "\nReading 0x%x to FMT_HORZ...\n", val);
-	val = regr(CCDC_FMT_VERT);
-	dev_notice(ccdc_cfg.dev, "\nReading 0x%x to FMT_VERT...\n", val);
-	val = regr(CCDC_HSIZE_OFF);
-	dev_notice(ccdc_cfg.dev, "\nReading 0x%x to HSIZE_OFF...\n", val);
-	val = regr(CCDC_SDOFST);
-	dev_notice(ccdc_cfg.dev, "\nReading 0x%x to SDOFST...\n", val);
-	val = regr(CCDC_VP_OUT);
-	dev_notice(ccdc_cfg.dev, "\nReading 0x%x to VP_OUT...\n", val);
-	val = regr(CCDC_SYN_MODE);
-	dev_notice(ccdc_cfg.dev, "\nReading 0x%x to SYN_MODE...\n", val);
-	val = regr(CCDC_HORZ_INFO);
-	dev_notice(ccdc_cfg.dev, "\nReading 0x%x to HORZ_INFO...\n", val);
-	val = regr(CCDC_VERT_START);
-	dev_notice(ccdc_cfg.dev, "\nReading 0x%x to VERT_START...\n", val);
-	val = regr(CCDC_VERT_LINES);
-	dev_notice(ccdc_cfg.dev, "\nReading 0x%x to VERT_LINES...\n", val);
-}
-
-static int validate_ccdc_param(struct ccdc_config_params_raw *ccdcparam)
-{
-	if (ccdcparam->alaw.enable) {
-		if ((ccdcparam->alaw.gama_wd > CCDC_GAMMA_BITS_09_0) ||
-		    (ccdcparam->alaw.gama_wd < CCDC_GAMMA_BITS_15_6) ||
-		    (ccdcparam->alaw.gama_wd < ccdcparam->data_sz)) {
-			dev_dbg(ccdc_cfg.dev, "\nInvalid data line select");
-			return -1;
-		}
-	}
-	return 0;
-}
-
-static int ccdc_update_raw_params(struct ccdc_config_params_raw *raw_params)
-{
-	struct ccdc_config_params_raw *config_params =
-				&ccdc_cfg.bayer.config_params;
-	unsigned int *fpc_virtaddr = NULL;
-	unsigned int *fpc_physaddr = NULL;
-
-	memcpy(config_params, raw_params, sizeof(*raw_params));
-	/*
-	 * allocate memory for fault pixel table and copy the user
-	 * values to the table
-	 */
-	if (!config_params->fault_pxl.enable)
-		return 0;
-
-	fpc_physaddr = (unsigned int *)config_params->fault_pxl.fpc_table_addr;
-	fpc_virtaddr = (unsigned int *)phys_to_virt(
-				(unsigned long)fpc_physaddr);
-	/*
-	 * Allocate memory for FPC table if current
-	 * FPC table buffer is not big enough to
-	 * accommodate FPC Number requested
-	 */
-	if (raw_params->fault_pxl.fp_num != config_params->fault_pxl.fp_num) {
-		if (fpc_physaddr != NULL) {
-			free_pages((unsigned long)fpc_physaddr,
-				   get_order
-				   (config_params->fault_pxl.fp_num *
-				   FP_NUM_BYTES));
-		}
-
-		/* Allocate memory for FPC table */
-		fpc_virtaddr =
-			(unsigned int *)__get_free_pages(GFP_KERNEL | GFP_DMA,
-							 get_order(raw_params->
-							 fault_pxl.fp_num *
-							 FP_NUM_BYTES));
-
-		if (fpc_virtaddr == NULL) {
-			dev_dbg(ccdc_cfg.dev,
-				"\nUnable to allocate memory for FPC");
-			return -EFAULT;
-		}
-		fpc_physaddr =
-		    (unsigned int *)virt_to_phys((void *)fpc_virtaddr);
-	}
-
-	/* Copy number of fault pixels and FPC table */
-	config_params->fault_pxl.fp_num = raw_params->fault_pxl.fp_num;
-	if (copy_from_user(fpc_virtaddr,
-			(void __user *)raw_params->fault_pxl.fpc_table_addr,
-			config_params->fault_pxl.fp_num * FP_NUM_BYTES)) {
-		dev_dbg(ccdc_cfg.dev, "\n copy_from_user failed");
-		return -EFAULT;
-	}
-	config_params->fault_pxl.fpc_table_addr = (unsigned int)fpc_physaddr;
-	return 0;
-}
-
-static int ccdc_close(struct device *dev)
-{
-	struct ccdc_config_params_raw *config_params =
-				&ccdc_cfg.bayer.config_params;
-	unsigned int *fpc_physaddr = NULL, *fpc_virtaddr = NULL;
-
-	fpc_physaddr = (unsigned int *)config_params->fault_pxl.fpc_table_addr;
-
-	if (fpc_physaddr != NULL) {
-		fpc_virtaddr = (unsigned int *)
-		    phys_to_virt((unsigned long)fpc_physaddr);
-		free_pages((unsigned long)fpc_virtaddr,
-			   get_order(config_params->fault_pxl.fp_num *
-			   FP_NUM_BYTES));
-	}
-	return 0;
-}
-
-/*
- * ccdc_restore_defaults()
- * This function will write defaults to all CCDC registers
- */
-static void ccdc_restore_defaults(void)
-{
-	int i;
-
-	/* disable CCDC */
-	ccdc_enable(0);
-	/* set all registers to default value */
-	for (i = 4; i <= 0x94; i += 4)
-		regw(0,  i);
-	regw(CCDC_NO_CULLING, CCDC_CULLING);
-	regw(CCDC_GAMMA_BITS_11_2, CCDC_ALAW);
-}
-
-static int ccdc_open(struct device *device)
-{
-	ccdc_restore_defaults();
-	if (ccdc_cfg.if_type == VPFE_RAW_BAYER)
-		ccdc_enable_vport(1);
-	return 0;
-}
-
-static void ccdc_sbl_reset(void)
-{
-	vpss_clear_wbl_overflow(VPSS_PCR_CCDC_WBL_O);
-}
-
-/* Parameter operations */
-static int ccdc_set_params(void __user *params)
-{
-	struct ccdc_config_params_raw ccdc_raw_params;
-	int x;
-
-	if (ccdc_cfg.if_type != VPFE_RAW_BAYER)
-		return -EINVAL;
-
-	x = copy_from_user(&ccdc_raw_params, params, sizeof(ccdc_raw_params));
-	if (x) {
-		dev_dbg(ccdc_cfg.dev, "ccdc_set_params: error in copying"
-			   "ccdc params, %d\n", x);
-		return -EFAULT;
-	}
-
-	if (!validate_ccdc_param(&ccdc_raw_params)) {
-		if (!ccdc_update_raw_params(&ccdc_raw_params))
-			return 0;
-	}
-	return -EINVAL;
-}
-
-/*
- * ccdc_config_ycbcr()
- * This function will configure CCDC for YCbCr video capture
- */
-void ccdc_config_ycbcr(void)
-{
-	struct ccdc_params_ycbcr *params = &ccdc_cfg.ycbcr;
-	u32 syn_mode;
-
-	dev_dbg(ccdc_cfg.dev, "\nStarting ccdc_config_ycbcr...");
-	/*
-	 * first restore the CCDC registers to default values
-	 * This is important since we assume default values to be set in
-	 * a lot of registers that we didn't touch
-	 */
-	ccdc_restore_defaults();
-
-	/*
-	 * configure pixel format, frame format, configure video frame
-	 * format, enable output to SDRAM, enable internal timing generator
-	 * and 8bit pack mode
-	 */
-	syn_mode = (((params->pix_fmt & CCDC_SYN_MODE_INPMOD_MASK) <<
-		    CCDC_SYN_MODE_INPMOD_SHIFT) |
-		    ((params->frm_fmt & CCDC_SYN_FLDMODE_MASK) <<
-		    CCDC_SYN_FLDMODE_SHIFT) | CCDC_VDHDEN_ENABLE |
-		    CCDC_WEN_ENABLE | CCDC_DATA_PACK_ENABLE);
-
-	/* setup BT.656 sync mode */
-	if (params->bt656_enable) {
-		regw(CCDC_REC656IF_BT656_EN, CCDC_REC656IF);
-
-		/*
-		 * configure the FID, VD, HD pin polarity,
-		 * fld,hd pol positive, vd negative, 8-bit data
-		 */
-		syn_mode |= CCDC_SYN_MODE_VD_POL_NEGATIVE;
-		if (ccdc_cfg.if_type == VPFE_BT656_10BIT)
-			syn_mode |= CCDC_SYN_MODE_10BITS;
-		else
-			syn_mode |= CCDC_SYN_MODE_8BITS;
-	} else {
-		/* y/c external sync mode */
-		syn_mode |= (((params->fid_pol & CCDC_FID_POL_MASK) <<
-			     CCDC_FID_POL_SHIFT) |
-			     ((params->hd_pol & CCDC_HD_POL_MASK) <<
-			     CCDC_HD_POL_SHIFT) |
-			     ((params->vd_pol & CCDC_VD_POL_MASK) <<
-			     CCDC_VD_POL_SHIFT));
-	}
-	regw(syn_mode, CCDC_SYN_MODE);
-
-	/* configure video window */
-	ccdc_setwin(&params->win, params->frm_fmt, 2);
-
-	/*
-	 * configure the order of y cb cr in SDRAM, and disable latch
-	 * internal register on vsync
-	 */
-	if (ccdc_cfg.if_type == VPFE_BT656_10BIT)
-		regw((params->pix_order << CCDC_CCDCFG_Y8POS_SHIFT) |
-			CCDC_LATCH_ON_VSYNC_DISABLE | CCDC_CCDCFG_BW656_10BIT,
-			CCDC_CCDCFG);
-	else
-		regw((params->pix_order << CCDC_CCDCFG_Y8POS_SHIFT) |
-			CCDC_LATCH_ON_VSYNC_DISABLE, CCDC_CCDCFG);
-
-	/*
-	 * configure the horizontal line offset. This should be a
-	 * on 32 byte boundary. So clear LSB 5 bits
-	 */
-	regw(((params->win.width * 2  + 31) & ~0x1f), CCDC_HSIZE_OFF);
-
-	/* configure the memory line offset */
-	if (params->buf_type == CCDC_BUFTYPE_FLD_INTERLEAVED)
-		/* two fields are interleaved in memory */
-		regw(CCDC_SDOFST_FIELD_INTERLEAVED, CCDC_SDOFST);
-
-	ccdc_sbl_reset();
-	dev_dbg(ccdc_cfg.dev, "\nEnd of ccdc_config_ycbcr...\n");
-}
-
-static void ccdc_config_black_clamp(struct ccdc_black_clamp *bclamp)
-{
-	u32 val;
-
-	if (!bclamp->enable) {
-		/* configure DCSub */
-		val = (bclamp->dc_sub) & CCDC_BLK_DC_SUB_MASK;
-		regw(val, CCDC_DCSUB);
-		dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to DCSUB...\n", val);
-		regw(CCDC_CLAMP_DEFAULT_VAL, CCDC_CLAMP);
-		dev_dbg(ccdc_cfg.dev, "\nWriting 0x0000 to CLAMP...\n");
-		return;
-	}
-	/*
-	 * Configure gain,  Start pixel, No of line to be avg,
-	 * No of pixel/line to be avg, & Enable the Black clamping
-	 */
-	val = ((bclamp->sgain & CCDC_BLK_SGAIN_MASK) |
-	       ((bclamp->start_pixel & CCDC_BLK_ST_PXL_MASK) <<
-		CCDC_BLK_ST_PXL_SHIFT) |
-	       ((bclamp->sample_ln & CCDC_BLK_SAMPLE_LINE_MASK) <<
-		CCDC_BLK_SAMPLE_LINE_SHIFT) |
-	       ((bclamp->sample_pixel & CCDC_BLK_SAMPLE_LN_MASK) <<
-		CCDC_BLK_SAMPLE_LN_SHIFT) | CCDC_BLK_CLAMP_ENABLE);
-	regw(val, CCDC_CLAMP);
-	dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to CLAMP...\n", val);
-	/* If Black clamping is enable then make dcsub 0 */
-	regw(CCDC_DCSUB_DEFAULT_VAL, CCDC_DCSUB);
-	dev_dbg(ccdc_cfg.dev, "\nWriting 0x00000000 to DCSUB...\n");
-}
-
-static void ccdc_config_black_compense(struct ccdc_black_compensation *bcomp)
-{
-	u32 val;
-
-	val = ((bcomp->b & CCDC_BLK_COMP_MASK) |
-	      ((bcomp->gb & CCDC_BLK_COMP_MASK) <<
-	       CCDC_BLK_COMP_GB_COMP_SHIFT) |
-	      ((bcomp->gr & CCDC_BLK_COMP_MASK) <<
-	       CCDC_BLK_COMP_GR_COMP_SHIFT) |
-	      ((bcomp->r & CCDC_BLK_COMP_MASK) <<
-	       CCDC_BLK_COMP_R_COMP_SHIFT));
-	regw(val, CCDC_BLKCMP);
-}
-
-static void ccdc_config_fpc(struct ccdc_fault_pixel *fpc)
-{
-	u32 val;
-
-	/* Initially disable FPC */
-	val = CCDC_FPC_DISABLE;
-	regw(val, CCDC_FPC);
-
-	if (!fpc->enable)
-		return;
-
-	/* Configure Fault pixel if needed */
-	regw(fpc->fpc_table_addr, CCDC_FPC_ADDR);
-	dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to FPC_ADDR...\n",
-		       (fpc->fpc_table_addr));
-	/* Write the FPC params with FPC disable */
-	val = fpc->fp_num & CCDC_FPC_FPC_NUM_MASK;
-	regw(val, CCDC_FPC);
-
-	dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to FPC...\n", val);
-	/* read the FPC register */
-	val = regr(CCDC_FPC) | CCDC_FPC_ENABLE;
-	regw(val, CCDC_FPC);
-	dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to FPC...\n", val);
-}
-
-/*
- * ccdc_config_raw()
- * This function will configure CCDC for Raw capture mode
- */
-void ccdc_config_raw(void)
-{
-	struct ccdc_params_raw *params = &ccdc_cfg.bayer;
-	struct ccdc_config_params_raw *config_params =
-				&ccdc_cfg.bayer.config_params;
-	unsigned int syn_mode = 0;
-	unsigned int val;
-
-	dev_dbg(ccdc_cfg.dev, "\nStarting ccdc_config_raw...");
-
-	/*      Reset CCDC */
-	ccdc_restore_defaults();
-
-	/* Disable latching function registers on VSYNC  */
-	regw(CCDC_LATCH_ON_VSYNC_DISABLE, CCDC_CCDCFG);
-
-	/*
-	 * Configure the vertical sync polarity(SYN_MODE.VDPOL),
-	 * horizontal sync polarity (SYN_MODE.HDPOL), frame id polarity
-	 * (SYN_MODE.FLDPOL), frame format(progressive or interlace),
-	 * data size(SYNMODE.DATSIZ), &pixel format (Input mode), output
-	 * SDRAM, enable internal timing generator
-	 */
-	syn_mode =
-		(((params->vd_pol & CCDC_VD_POL_MASK) << CCDC_VD_POL_SHIFT) |
-		((params->hd_pol & CCDC_HD_POL_MASK) << CCDC_HD_POL_SHIFT) |
-		((params->fid_pol & CCDC_FID_POL_MASK) << CCDC_FID_POL_SHIFT) |
-		((params->frm_fmt & CCDC_FRM_FMT_MASK) << CCDC_FRM_FMT_SHIFT) |
-		((config_params->data_sz & CCDC_DATA_SZ_MASK) <<
-		CCDC_DATA_SZ_SHIFT) |
-		((params->pix_fmt & CCDC_PIX_FMT_MASK) << CCDC_PIX_FMT_SHIFT) |
-		CCDC_WEN_ENABLE | CCDC_VDHDEN_ENABLE);
-
-	/* Enable and configure aLaw register if needed */
-	if (config_params->alaw.enable) {
-		val = ((config_params->alaw.gama_wd &
-		      CCDC_ALAW_GAMA_WD_MASK) | CCDC_ALAW_ENABLE);
-		regw(val, CCDC_ALAW);
-		dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to ALAW...\n", val);
-	}
-
-	/* Configure video window */
-	ccdc_setwin(&params->win, params->frm_fmt, CCDC_PPC_RAW);
-
-	/* Configure Black Clamp */
-	ccdc_config_black_clamp(&config_params->blk_clamp);
-
-	/* Configure Black level compensation */
-	ccdc_config_black_compense(&config_params->blk_comp);
-
-	/* Configure Fault Pixel Correction */
-	ccdc_config_fpc(&config_params->fault_pxl);
-
-	/* If data size is 8 bit then pack the data */
-	if ((config_params->data_sz == CCDC_DATA_8BITS) ||
-	     config_params->alaw.enable)
-		syn_mode |= CCDC_DATA_PACK_ENABLE;
-
-#ifdef CONFIG_DM644X_VIDEO_PORT_ENABLE
-	/* enable video port */
-	val = CCDC_ENABLE_VIDEO_PORT;
-#else
-	/* disable video port */
-	val = CCDC_DISABLE_VIDEO_PORT;
-#endif
-
-	if (config_params->data_sz == CCDC_DATA_8BITS)
-		val |= (CCDC_DATA_10BITS & CCDC_FMTCFG_VPIN_MASK)
-		    << CCDC_FMTCFG_VPIN_SHIFT;
-	else
-		val |= (config_params->data_sz & CCDC_FMTCFG_VPIN_MASK)
-		    << CCDC_FMTCFG_VPIN_SHIFT;
-	/* Write value in FMTCFG */
-	regw(val, CCDC_FMTCFG);
-
-	dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to FMTCFG...\n", val);
-	/* Configure the color pattern according to mt9t001 sensor */
-	regw(CCDC_COLPTN_VAL, CCDC_COLPTN);
-
-	dev_dbg(ccdc_cfg.dev, "\nWriting 0xBB11BB11 to COLPTN...\n");
-	/*
-	 * Configure Data formatter(Video port) pixel selection
-	 * (FMT_HORZ, FMT_VERT)
-	 */
-	val = ((params->win.left & CCDC_FMT_HORZ_FMTSPH_MASK) <<
-	      CCDC_FMT_HORZ_FMTSPH_SHIFT) |
-	      (params->win.width & CCDC_FMT_HORZ_FMTLNH_MASK);
-	regw(val, CCDC_FMT_HORZ);
-
-	dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to FMT_HORZ...\n", val);
-	val = (params->win.top & CCDC_FMT_VERT_FMTSLV_MASK)
-	    << CCDC_FMT_VERT_FMTSLV_SHIFT;
-	if (params->frm_fmt == CCDC_FRMFMT_PROGRESSIVE)
-		val |= (params->win.height) & CCDC_FMT_VERT_FMTLNV_MASK;
-	else
-		val |= (params->win.height >> 1) & CCDC_FMT_VERT_FMTLNV_MASK;
-
-	dev_dbg(ccdc_cfg.dev, "\nparams->win.height  0x%x ...\n",
-	       params->win.height);
-	regw(val, CCDC_FMT_VERT);
-
-	dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to FMT_VERT...\n", val);
-
-	dev_dbg(ccdc_cfg.dev, "\nbelow regw(val, FMT_VERT)...");
-
-	/*
-	 * Configure Horizontal offset register. If pack 8 is enabled then
-	 * 1 pixel will take 1 byte
-	 */
-	if ((config_params->data_sz == CCDC_DATA_8BITS) ||
-	    config_params->alaw.enable)
-		regw((params->win.width + CCDC_32BYTE_ALIGN_VAL) &
-		    CCDC_HSIZE_OFF_MASK, CCDC_HSIZE_OFF);
-	else
-		/* else one pixel will take 2 byte */
-		regw(((params->win.width * CCDC_TWO_BYTES_PER_PIXEL) +
-		    CCDC_32BYTE_ALIGN_VAL) & CCDC_HSIZE_OFF_MASK,
-		    CCDC_HSIZE_OFF);
-
-	/* Set value for SDOFST */
-	if (params->frm_fmt == CCDC_FRMFMT_INTERLACED) {
-		if (params->image_invert_enable) {
-			/* For intelace inverse mode */
-			regw(CCDC_INTERLACED_IMAGE_INVERT, CCDC_SDOFST);
-			dev_dbg(ccdc_cfg.dev, "\nWriting 0x4B6D to SDOFST..\n");
-		}
-
-		else {
-			/* For intelace non inverse mode */
-			regw(CCDC_INTERLACED_NO_IMAGE_INVERT, CCDC_SDOFST);
-			dev_dbg(ccdc_cfg.dev, "\nWriting 0x0249 to SDOFST..\n");
-		}
-	} else if (params->frm_fmt == CCDC_FRMFMT_PROGRESSIVE) {
-		regw(CCDC_PROGRESSIVE_NO_IMAGE_INVERT, CCDC_SDOFST);
-		dev_dbg(ccdc_cfg.dev, "\nWriting 0x0000 to SDOFST...\n");
-	}
-
-	/*
-	 * Configure video port pixel selection (VPOUT)
-	 * Here -1 is to make the height value less than FMT_VERT.FMTLNV
-	 */
-	if (params->frm_fmt == CCDC_FRMFMT_PROGRESSIVE)
-		val = (((params->win.height - 1) & CCDC_VP_OUT_VERT_NUM_MASK))
-		    << CCDC_VP_OUT_VERT_NUM_SHIFT;
-	else
-		val =
-		    ((((params->win.height >> CCDC_INTERLACED_HEIGHT_SHIFT) -
-		     1) & CCDC_VP_OUT_VERT_NUM_MASK)) <<
-		    CCDC_VP_OUT_VERT_NUM_SHIFT;
-
-	val |= ((((params->win.width))) & CCDC_VP_OUT_HORZ_NUM_MASK)
-	    << CCDC_VP_OUT_HORZ_NUM_SHIFT;
-	val |= (params->win.left) & CCDC_VP_OUT_HORZ_ST_MASK;
-	regw(val, CCDC_VP_OUT);
-
-	dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to VP_OUT...\n", val);
-	regw(syn_mode, CCDC_SYN_MODE);
-	dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to SYN_MODE...\n", syn_mode);
-
-	ccdc_sbl_reset();
-	dev_dbg(ccdc_cfg.dev, "\nend of ccdc_config_raw...");
-	ccdc_readregs();
-}
-
-static int ccdc_configure(void)
-{
-	if (ccdc_cfg.if_type == VPFE_RAW_BAYER)
-		ccdc_config_raw();
-	else
-		ccdc_config_ycbcr();
-	return 0;
-}
-
-static int ccdc_set_buftype(enum ccdc_buftype buf_type)
-{
-	if (ccdc_cfg.if_type == VPFE_RAW_BAYER)
-		ccdc_cfg.bayer.buf_type = buf_type;
-	else
-		ccdc_cfg.ycbcr.buf_type = buf_type;
-	return 0;
-}
-
-static enum ccdc_buftype ccdc_get_buftype(void)
-{
-	if (ccdc_cfg.if_type == VPFE_RAW_BAYER)
-		return ccdc_cfg.bayer.buf_type;
-	return ccdc_cfg.ycbcr.buf_type;
-}
-
-static int ccdc_enum_pix(u32 *pix, int i)
-{
-	int ret = -EINVAL;
-	if (ccdc_cfg.if_type == VPFE_RAW_BAYER) {
-		if (i < ARRAY_SIZE(ccdc_raw_bayer_pix_formats)) {
-			*pix = ccdc_raw_bayer_pix_formats[i];
-			ret = 0;
-		}
-	} else {
-		if (i < ARRAY_SIZE(ccdc_raw_yuv_pix_formats)) {
-			*pix = ccdc_raw_yuv_pix_formats[i];
-			ret = 0;
-		}
-	}
-	return ret;
-}
-
-static int ccdc_set_pixel_format(u32 pixfmt)
-{
-	if (ccdc_cfg.if_type == VPFE_RAW_BAYER) {
-		ccdc_cfg.bayer.pix_fmt = CCDC_PIXFMT_RAW;
-		if (pixfmt == V4L2_PIX_FMT_SBGGR8)
-			ccdc_cfg.bayer.config_params.alaw.enable = 1;
-		else if (pixfmt != V4L2_PIX_FMT_SBGGR16)
-			return -EINVAL;
-	} else {
-		if (pixfmt == V4L2_PIX_FMT_YUYV)
-			ccdc_cfg.ycbcr.pix_order = CCDC_PIXORDER_YCBYCR;
-		else if (pixfmt == V4L2_PIX_FMT_UYVY)
-			ccdc_cfg.ycbcr.pix_order = CCDC_PIXORDER_CBYCRY;
-		else
-			return -EINVAL;
-	}
-	return 0;
-}
-
-static u32 ccdc_get_pixel_format(void)
-{
-	struct ccdc_a_law *alaw = &ccdc_cfg.bayer.config_params.alaw;
-	u32 pixfmt;
-
-	if (ccdc_cfg.if_type == VPFE_RAW_BAYER)
-		if (alaw->enable)
-			pixfmt = V4L2_PIX_FMT_SBGGR8;
-		else
-			pixfmt = V4L2_PIX_FMT_SBGGR16;
-	else {
-		if (ccdc_cfg.ycbcr.pix_order == CCDC_PIXORDER_YCBYCR)
-			pixfmt = V4L2_PIX_FMT_YUYV;
-		else
-			pixfmt = V4L2_PIX_FMT_UYVY;
-	}
-	return pixfmt;
-}
-
-static int ccdc_set_image_window(struct v4l2_rect *win)
-{
-	if (ccdc_cfg.if_type == VPFE_RAW_BAYER)
-		ccdc_cfg.bayer.win = *win;
-	else
-		ccdc_cfg.ycbcr.win = *win;
-	return 0;
-}
-
-static void ccdc_get_image_window(struct v4l2_rect *win)
-{
-	if (ccdc_cfg.if_type == VPFE_RAW_BAYER)
-		*win = ccdc_cfg.bayer.win;
-	else
-		*win = ccdc_cfg.ycbcr.win;
-}
-
-static unsigned int ccdc_get_line_length(void)
-{
-	struct ccdc_config_params_raw *config_params =
-				&ccdc_cfg.bayer.config_params;
-	unsigned int len;
-
-	if (ccdc_cfg.if_type == VPFE_RAW_BAYER) {
-		if ((config_params->alaw.enable) ||
-		    (config_params->data_sz == CCDC_DATA_8BITS))
-			len = ccdc_cfg.bayer.win.width;
-		else
-			len = ccdc_cfg.bayer.win.width * 2;
-	} else
-		len = ccdc_cfg.ycbcr.win.width * 2;
-	return ALIGN(len, 32);
-}
-
-static int ccdc_set_frame_format(enum ccdc_frmfmt frm_fmt)
-{
-	if (ccdc_cfg.if_type == VPFE_RAW_BAYER)
-		ccdc_cfg.bayer.frm_fmt = frm_fmt;
-	else
-		ccdc_cfg.ycbcr.frm_fmt = frm_fmt;
-	return 0;
-}
-
-static enum ccdc_frmfmt ccdc_get_frame_format(void)
-{
-	if (ccdc_cfg.if_type == VPFE_RAW_BAYER)
-		return ccdc_cfg.bayer.frm_fmt;
-	else
-		return ccdc_cfg.ycbcr.frm_fmt;
-}
-
-static int ccdc_getfid(void)
-{
-	return (regr(CCDC_SYN_MODE) >> 15) & 1;
-}
-
-/* misc operations */
-static inline void ccdc_setfbaddr(unsigned long addr)
-{
-	regw(addr & 0xffffffe0, CCDC_SDR_ADDR);
-}
-
-static int ccdc_set_hw_if_params(struct vpfe_hw_if_param *params)
-{
-	ccdc_cfg.if_type = params->if_type;
-
-	switch (params->if_type) {
-	case VPFE_BT656:
-	case VPFE_YCBCR_SYNC_16:
-	case VPFE_YCBCR_SYNC_8:
-	case VPFE_BT656_10BIT:
-		ccdc_cfg.ycbcr.vd_pol = params->vdpol;
-		ccdc_cfg.ycbcr.hd_pol = params->hdpol;
-		break;
-	default:
-		/* TODO add support for raw bayer here */
-		return -EINVAL;
-	}
-	return 0;
-}
-
-static void ccdc_save_context(void)
-{
-	ccdc_ctx[CCDC_PCR >> 2] = regr(CCDC_PCR);
-	ccdc_ctx[CCDC_SYN_MODE >> 2] = regr(CCDC_SYN_MODE);
-	ccdc_ctx[CCDC_HD_VD_WID >> 2] = regr(CCDC_HD_VD_WID);
-	ccdc_ctx[CCDC_PIX_LINES >> 2] = regr(CCDC_PIX_LINES);
-	ccdc_ctx[CCDC_HORZ_INFO >> 2] = regr(CCDC_HORZ_INFO);
-	ccdc_ctx[CCDC_VERT_START >> 2] = regr(CCDC_VERT_START);
-	ccdc_ctx[CCDC_VERT_LINES >> 2] = regr(CCDC_VERT_LINES);
-	ccdc_ctx[CCDC_CULLING >> 2] = regr(CCDC_CULLING);
-	ccdc_ctx[CCDC_HSIZE_OFF >> 2] = regr(CCDC_HSIZE_OFF);
-	ccdc_ctx[CCDC_SDOFST >> 2] = regr(CCDC_SDOFST);
-	ccdc_ctx[CCDC_SDR_ADDR >> 2] = regr(CCDC_SDR_ADDR);
-	ccdc_ctx[CCDC_CLAMP >> 2] = regr(CCDC_CLAMP);
-	ccdc_ctx[CCDC_DCSUB >> 2] = regr(CCDC_DCSUB);
-	ccdc_ctx[CCDC_COLPTN >> 2] = regr(CCDC_COLPTN);
-	ccdc_ctx[CCDC_BLKCMP >> 2] = regr(CCDC_BLKCMP);
-	ccdc_ctx[CCDC_FPC >> 2] = regr(CCDC_FPC);
-	ccdc_ctx[CCDC_FPC_ADDR >> 2] = regr(CCDC_FPC_ADDR);
-	ccdc_ctx[CCDC_VDINT >> 2] = regr(CCDC_VDINT);
-	ccdc_ctx[CCDC_ALAW >> 2] = regr(CCDC_ALAW);
-	ccdc_ctx[CCDC_REC656IF >> 2] = regr(CCDC_REC656IF);
-	ccdc_ctx[CCDC_CCDCFG >> 2] = regr(CCDC_CCDCFG);
-	ccdc_ctx[CCDC_FMTCFG >> 2] = regr(CCDC_FMTCFG);
-	ccdc_ctx[CCDC_FMT_HORZ >> 2] = regr(CCDC_FMT_HORZ);
-	ccdc_ctx[CCDC_FMT_VERT >> 2] = regr(CCDC_FMT_VERT);
-	ccdc_ctx[CCDC_FMT_ADDR0 >> 2] = regr(CCDC_FMT_ADDR0);
-	ccdc_ctx[CCDC_FMT_ADDR1 >> 2] = regr(CCDC_FMT_ADDR1);
-	ccdc_ctx[CCDC_FMT_ADDR2 >> 2] = regr(CCDC_FMT_ADDR2);
-	ccdc_ctx[CCDC_FMT_ADDR3 >> 2] = regr(CCDC_FMT_ADDR3);
-	ccdc_ctx[CCDC_FMT_ADDR4 >> 2] = regr(CCDC_FMT_ADDR4);
-	ccdc_ctx[CCDC_FMT_ADDR5 >> 2] = regr(CCDC_FMT_ADDR5);
-	ccdc_ctx[CCDC_FMT_ADDR6 >> 2] = regr(CCDC_FMT_ADDR6);
-	ccdc_ctx[CCDC_FMT_ADDR7 >> 2] = regr(CCDC_FMT_ADDR7);
-	ccdc_ctx[CCDC_PRGEVEN_0 >> 2] = regr(CCDC_PRGEVEN_0);
-	ccdc_ctx[CCDC_PRGEVEN_1 >> 2] = regr(CCDC_PRGEVEN_1);
-	ccdc_ctx[CCDC_PRGODD_0 >> 2] = regr(CCDC_PRGODD_0);
-	ccdc_ctx[CCDC_PRGODD_1 >> 2] = regr(CCDC_PRGODD_1);
-	ccdc_ctx[CCDC_VP_OUT >> 2] = regr(CCDC_VP_OUT);
-}
-
-static void ccdc_restore_context(void)
-{
-	regw(ccdc_ctx[CCDC_SYN_MODE >> 2], CCDC_SYN_MODE);
-	regw(ccdc_ctx[CCDC_HD_VD_WID >> 2], CCDC_HD_VD_WID);
-	regw(ccdc_ctx[CCDC_PIX_LINES >> 2], CCDC_PIX_LINES);
-	regw(ccdc_ctx[CCDC_HORZ_INFO >> 2], CCDC_HORZ_INFO);
-	regw(ccdc_ctx[CCDC_VERT_START >> 2], CCDC_VERT_START);
-	regw(ccdc_ctx[CCDC_VERT_LINES >> 2], CCDC_VERT_LINES);
-	regw(ccdc_ctx[CCDC_CULLING >> 2], CCDC_CULLING);
-	regw(ccdc_ctx[CCDC_HSIZE_OFF >> 2], CCDC_HSIZE_OFF);
-	regw(ccdc_ctx[CCDC_SDOFST >> 2], CCDC_SDOFST);
-	regw(ccdc_ctx[CCDC_SDR_ADDR >> 2], CCDC_SDR_ADDR);
-	regw(ccdc_ctx[CCDC_CLAMP >> 2], CCDC_CLAMP);
-	regw(ccdc_ctx[CCDC_DCSUB >> 2], CCDC_DCSUB);
-	regw(ccdc_ctx[CCDC_COLPTN >> 2], CCDC_COLPTN);
-	regw(ccdc_ctx[CCDC_BLKCMP >> 2], CCDC_BLKCMP);
-	regw(ccdc_ctx[CCDC_FPC >> 2], CCDC_FPC);
-	regw(ccdc_ctx[CCDC_FPC_ADDR >> 2], CCDC_FPC_ADDR);
-	regw(ccdc_ctx[CCDC_VDINT >> 2], CCDC_VDINT);
-	regw(ccdc_ctx[CCDC_ALAW >> 2], CCDC_ALAW);
-	regw(ccdc_ctx[CCDC_REC656IF >> 2], CCDC_REC656IF);
-	regw(ccdc_ctx[CCDC_CCDCFG >> 2], CCDC_CCDCFG);
-	regw(ccdc_ctx[CCDC_FMTCFG >> 2], CCDC_FMTCFG);
-	regw(ccdc_ctx[CCDC_FMT_HORZ >> 2], CCDC_FMT_HORZ);
-	regw(ccdc_ctx[CCDC_FMT_VERT >> 2], CCDC_FMT_VERT);
-	regw(ccdc_ctx[CCDC_FMT_ADDR0 >> 2], CCDC_FMT_ADDR0);
-	regw(ccdc_ctx[CCDC_FMT_ADDR1 >> 2], CCDC_FMT_ADDR1);
-	regw(ccdc_ctx[CCDC_FMT_ADDR2 >> 2], CCDC_FMT_ADDR2);
-	regw(ccdc_ctx[CCDC_FMT_ADDR3 >> 2], CCDC_FMT_ADDR3);
-	regw(ccdc_ctx[CCDC_FMT_ADDR4 >> 2], CCDC_FMT_ADDR4);
-	regw(ccdc_ctx[CCDC_FMT_ADDR5 >> 2], CCDC_FMT_ADDR5);
-	regw(ccdc_ctx[CCDC_FMT_ADDR6 >> 2], CCDC_FMT_ADDR6);
-	regw(ccdc_ctx[CCDC_FMT_ADDR7 >> 2], CCDC_FMT_ADDR7);
-	regw(ccdc_ctx[CCDC_PRGEVEN_0 >> 2], CCDC_PRGEVEN_0);
-	regw(ccdc_ctx[CCDC_PRGEVEN_1 >> 2], CCDC_PRGEVEN_1);
-	regw(ccdc_ctx[CCDC_PRGODD_0 >> 2], CCDC_PRGODD_0);
-	regw(ccdc_ctx[CCDC_PRGODD_1 >> 2], CCDC_PRGODD_1);
-	regw(ccdc_ctx[CCDC_VP_OUT >> 2], CCDC_VP_OUT);
-	regw(ccdc_ctx[CCDC_PCR >> 2], CCDC_PCR);
-}
-static struct ccdc_hw_device ccdc_hw_dev = {
-	.name = "DM6446 CCDC",
-	.owner = THIS_MODULE,
-	.hw_ops = {
-		.open = ccdc_open,
-		.close = ccdc_close,
-		.reset = ccdc_sbl_reset,
-		.enable = ccdc_enable,
-		.set_hw_if_params = ccdc_set_hw_if_params,
-		.set_params = ccdc_set_params,
-		.configure = ccdc_configure,
-		.set_buftype = ccdc_set_buftype,
-		.get_buftype = ccdc_get_buftype,
-		.enum_pix = ccdc_enum_pix,
-		.set_pixel_format = ccdc_set_pixel_format,
-		.get_pixel_format = ccdc_get_pixel_format,
-		.set_frame_format = ccdc_set_frame_format,
-		.get_frame_format = ccdc_get_frame_format,
-		.set_image_window = ccdc_set_image_window,
-		.get_image_window = ccdc_get_image_window,
-		.get_line_length = ccdc_get_line_length,
-		.setfbaddr = ccdc_setfbaddr,
-		.getfid = ccdc_getfid,
-	},
-};
-
-static int __devinit dm644x_ccdc_probe(struct platform_device *pdev)
-{
-	struct resource	*res;
-	int status = 0;
-
-	/*
-	 * first try to register with vpfe. If not correct platform, then we
-	 * don't have to iomap
-	 */
-	status = vpfe_register_ccdc_device(&ccdc_hw_dev);
-	if (status < 0)
-		return status;
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!res) {
-		status = -ENODEV;
-		goto fail_nores;
-	}
-
-	res = request_mem_region(res->start, resource_size(res), res->name);
-	if (!res) {
-		status = -EBUSY;
-		goto fail_nores;
-	}
-
-	ccdc_cfg.base_addr = ioremap_nocache(res->start, resource_size(res));
-	if (!ccdc_cfg.base_addr) {
-		status = -ENOMEM;
-		goto fail_nomem;
-	}
-
-	/* Get and enable Master clock */
-	ccdc_cfg.mclk = clk_get(&pdev->dev, "master");
-	if (IS_ERR(ccdc_cfg.mclk)) {
-		status = PTR_ERR(ccdc_cfg.mclk);
-		goto fail_nomap;
-	}
-	if (clk_enable(ccdc_cfg.mclk)) {
-		status = -ENODEV;
-		goto fail_mclk;
-	}
-
-	/* Get and enable Slave clock */
-	ccdc_cfg.sclk = clk_get(&pdev->dev, "slave");
-	if (IS_ERR(ccdc_cfg.sclk)) {
-		status = PTR_ERR(ccdc_cfg.sclk);
-		goto fail_mclk;
-	}
-	if (clk_enable(ccdc_cfg.sclk)) {
-		status = -ENODEV;
-		goto fail_sclk;
-	}
-	ccdc_cfg.dev = &pdev->dev;
-	printk(KERN_NOTICE "%s is registered with vpfe.\n", ccdc_hw_dev.name);
-	return 0;
-fail_sclk:
-	clk_put(ccdc_cfg.sclk);
-fail_mclk:
-	clk_put(ccdc_cfg.mclk);
-fail_nomap:
-	iounmap(ccdc_cfg.base_addr);
-fail_nomem:
-	release_mem_region(res->start, resource_size(res));
-fail_nores:
-	vpfe_unregister_ccdc_device(&ccdc_hw_dev);
-	return status;
-}
-
-static int dm644x_ccdc_remove(struct platform_device *pdev)
-{
-	struct resource	*res;
-
-	clk_put(ccdc_cfg.mclk);
-	clk_put(ccdc_cfg.sclk);
-	iounmap(ccdc_cfg.base_addr);
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (res)
-		release_mem_region(res->start, resource_size(res));
-	vpfe_unregister_ccdc_device(&ccdc_hw_dev);
-	return 0;
-}
-
-static int dm644x_ccdc_suspend(struct device *dev)
-{
-	/* Save CCDC context */
-	ccdc_save_context();
-	/* Disable CCDC */
-	ccdc_enable(0);
-	/* Disable both master and slave clock */
-	clk_disable(ccdc_cfg.mclk);
-	clk_disable(ccdc_cfg.sclk);
-
-	return 0;
-}
-
-static int dm644x_ccdc_resume(struct device *dev)
-{
-	/* Enable both master and slave clock */
-	clk_enable(ccdc_cfg.mclk);
-	clk_enable(ccdc_cfg.sclk);
-	/* Restore CCDC context */
-	ccdc_restore_context();
-
-	return 0;
-}
-
-static const struct dev_pm_ops dm644x_ccdc_pm_ops = {
-	.suspend = dm644x_ccdc_suspend,
-	.resume = dm644x_ccdc_resume,
-};
-
-static struct platform_driver dm644x_ccdc_driver = {
-	.driver = {
-		.name	= "dm644x_ccdc",
-		.owner = THIS_MODULE,
-		.pm = &dm644x_ccdc_pm_ops,
-	},
-	.remove = __devexit_p(dm644x_ccdc_remove),
-	.probe = dm644x_ccdc_probe,
-};
-
-module_platform_driver(dm644x_ccdc_driver);
diff --git a/drivers/media/video/davinci/dm644x_ccdc_regs.h b/drivers/media/video/davinci/dm644x_ccdc_regs.h
deleted file mode 100644
index 90370e414e2..00000000000
--- a/drivers/media/video/davinci/dm644x_ccdc_regs.h
+++ /dev/null
@@ -1,153 +0,0 @@
-/*
- * Copyright (C) 2006-2009 Texas Instruments Inc
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef _DM644X_CCDC_REGS_H
-#define _DM644X_CCDC_REGS_H
-
-/**************************************************************************\
-* Register OFFSET Definitions
-\**************************************************************************/
-#define CCDC_PID				0x0
-#define CCDC_PCR				0x4
-#define CCDC_SYN_MODE				0x8
-#define CCDC_HD_VD_WID				0xc
-#define CCDC_PIX_LINES				0x10
-#define CCDC_HORZ_INFO				0x14
-#define CCDC_VERT_START				0x18
-#define CCDC_VERT_LINES				0x1c
-#define CCDC_CULLING				0x20
-#define CCDC_HSIZE_OFF				0x24
-#define CCDC_SDOFST				0x28
-#define CCDC_SDR_ADDR				0x2c
-#define CCDC_CLAMP				0x30
-#define CCDC_DCSUB				0x34
-#define CCDC_COLPTN				0x38
-#define CCDC_BLKCMP				0x3c
-#define CCDC_FPC				0x40
-#define CCDC_FPC_ADDR				0x44
-#define CCDC_VDINT				0x48
-#define CCDC_ALAW				0x4c
-#define CCDC_REC656IF				0x50
-#define CCDC_CCDCFG				0x54
-#define CCDC_FMTCFG				0x58
-#define CCDC_FMT_HORZ				0x5c
-#define CCDC_FMT_VERT				0x60
-#define CCDC_FMT_ADDR0				0x64
-#define CCDC_FMT_ADDR1				0x68
-#define CCDC_FMT_ADDR2				0x6c
-#define CCDC_FMT_ADDR3				0x70
-#define CCDC_FMT_ADDR4				0x74
-#define CCDC_FMT_ADDR5				0x78
-#define CCDC_FMT_ADDR6				0x7c
-#define CCDC_FMT_ADDR7				0x80
-#define CCDC_PRGEVEN_0				0x84
-#define CCDC_PRGEVEN_1				0x88
-#define CCDC_PRGODD_0				0x8c
-#define CCDC_PRGODD_1				0x90
-#define CCDC_VP_OUT				0x94
-#define CCDC_REG_END				0x98
-
-/***************************************************************
-*	Define for various register bit mask and shifts for CCDC
-****************************************************************/
-#define CCDC_FID_POL_MASK			1
-#define CCDC_FID_POL_SHIFT			4
-#define CCDC_HD_POL_MASK			1
-#define CCDC_HD_POL_SHIFT			3
-#define CCDC_VD_POL_MASK			1
-#define CCDC_VD_POL_SHIFT			2
-#define CCDC_HSIZE_OFF_MASK			0xffffffe0
-#define CCDC_32BYTE_ALIGN_VAL			31
-#define CCDC_FRM_FMT_MASK			0x1
-#define CCDC_FRM_FMT_SHIFT			7
-#define CCDC_DATA_SZ_MASK			7
-#define CCDC_DATA_SZ_SHIFT			8
-#define CCDC_PIX_FMT_MASK			3
-#define CCDC_PIX_FMT_SHIFT			12
-#define CCDC_VP2SDR_DISABLE			0xFFFBFFFF
-#define CCDC_WEN_ENABLE				(1 << 17)
-#define CCDC_SDR2RSZ_DISABLE			0xFFF7FFFF
-#define CCDC_VDHDEN_ENABLE			(1 << 16)
-#define CCDC_LPF_ENABLE				(1 << 14)
-#define CCDC_ALAW_ENABLE			(1 << 3)
-#define CCDC_ALAW_GAMA_WD_MASK			7
-#define CCDC_BLK_CLAMP_ENABLE			(1 << 31)
-#define CCDC_BLK_SGAIN_MASK			0x1F
-#define CCDC_BLK_ST_PXL_MASK			0x7FFF
-#define CCDC_BLK_ST_PXL_SHIFT			10
-#define CCDC_BLK_SAMPLE_LN_MASK			7
-#define CCDC_BLK_SAMPLE_LN_SHIFT		28
-#define CCDC_BLK_SAMPLE_LINE_MASK		7
-#define CCDC_BLK_SAMPLE_LINE_SHIFT		25
-#define CCDC_BLK_DC_SUB_MASK			0x03FFF
-#define CCDC_BLK_COMP_MASK			0xFF
-#define CCDC_BLK_COMP_GB_COMP_SHIFT		8
-#define CCDC_BLK_COMP_GR_COMP_SHIFT		16
-#define CCDC_BLK_COMP_R_COMP_SHIFT		24
-#define CCDC_LATCH_ON_VSYNC_DISABLE		(1 << 15)
-#define CCDC_FPC_ENABLE				(1 << 15)
-#define CCDC_FPC_DISABLE			0
-#define CCDC_FPC_FPC_NUM_MASK 			0x7FFF
-#define CCDC_DATA_PACK_ENABLE			(1 << 11)
-#define CCDC_FMTCFG_VPIN_MASK			7
-#define CCDC_FMTCFG_VPIN_SHIFT			12
-#define CCDC_FMT_HORZ_FMTLNH_MASK		0x1FFF
-#define CCDC_FMT_HORZ_FMTSPH_MASK		0x1FFF
-#define CCDC_FMT_HORZ_FMTSPH_SHIFT		16
-#define CCDC_FMT_VERT_FMTLNV_MASK		0x1FFF
-#define CCDC_FMT_VERT_FMTSLV_MASK		0x1FFF
-#define CCDC_FMT_VERT_FMTSLV_SHIFT		16
-#define CCDC_VP_OUT_VERT_NUM_MASK		0x3FFF
-#define CCDC_VP_OUT_VERT_NUM_SHIFT		17
-#define CCDC_VP_OUT_HORZ_NUM_MASK		0x1FFF
-#define CCDC_VP_OUT_HORZ_NUM_SHIFT		4
-#define CCDC_VP_OUT_HORZ_ST_MASK		0xF
-#define CCDC_HORZ_INFO_SPH_SHIFT		16
-#define CCDC_VERT_START_SLV0_SHIFT		16
-#define CCDC_VDINT_VDINT0_SHIFT			16
-#define CCDC_VDINT_VDINT1_MASK			0xFFFF
-#define CCDC_PPC_RAW				1
-#define CCDC_DCSUB_DEFAULT_VAL			0
-#define CCDC_CLAMP_DEFAULT_VAL			0
-#define CCDC_ENABLE_VIDEO_PORT			0x8000
-#define CCDC_DISABLE_VIDEO_PORT			0
-#define CCDC_COLPTN_VAL				0xBB11BB11
-#define CCDC_TWO_BYTES_PER_PIXEL		2
-#define CCDC_INTERLACED_IMAGE_INVERT		0x4B6D
-#define CCDC_INTERLACED_NO_IMAGE_INVERT		0x0249
-#define CCDC_PROGRESSIVE_IMAGE_INVERT		0x4000
-#define CCDC_PROGRESSIVE_NO_IMAGE_INVERT	0
-#define CCDC_INTERLACED_HEIGHT_SHIFT		1
-#define CCDC_SYN_MODE_INPMOD_SHIFT		12
-#define CCDC_SYN_MODE_INPMOD_MASK		3
-#define CCDC_SYN_MODE_8BITS			(7 << 8)
-#define CCDC_SYN_MODE_10BITS			(6 << 8)
-#define CCDC_SYN_MODE_11BITS			(5 << 8)
-#define CCDC_SYN_MODE_12BITS			(4 << 8)
-#define CCDC_SYN_MODE_13BITS			(3 << 8)
-#define CCDC_SYN_MODE_14BITS			(2 << 8)
-#define CCDC_SYN_MODE_15BITS			(1 << 8)
-#define CCDC_SYN_MODE_16BITS			(0 << 8)
-#define CCDC_SYN_FLDMODE_MASK			1
-#define CCDC_SYN_FLDMODE_SHIFT			7
-#define CCDC_REC656IF_BT656_EN			3
-#define CCDC_SYN_MODE_VD_POL_NEGATIVE		(1 << 2)
-#define CCDC_CCDCFG_Y8POS_SHIFT			11
-#define CCDC_CCDCFG_BW656_10BIT 		(1 << 5)
-#define CCDC_SDOFST_FIELD_INTERLEAVED		0x249
-#define CCDC_NO_CULLING				0xffff00ff
-#endif
diff --git a/drivers/media/video/davinci/isif.c b/drivers/media/video/davinci/isif.c
deleted file mode 100644
index b99d5423e3a..00000000000
--- a/drivers/media/video/davinci/isif.c
+++ /dev/null
@@ -1,1162 +0,0 @@
-/*
- * Copyright (C) 2008-2009 Texas Instruments Inc
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- * Image Sensor Interface (ISIF) driver
- *
- * This driver is for configuring the ISIF IP available on DM365 or any other
- * TI SoCs. This is used for capturing yuv or bayer video or image data
- * from a decoder or sensor. This IP is similar to the CCDC IP on DM355
- * and DM6446, but with enhanced or additional ip blocks. The driver
- * configures the ISIF upon commands from the vpfe bridge driver through
- * ccdc_hw_device interface.
- *
- * TODO: 1) Raw bayer parameter settings and bayer capture
- *	 2) Add support for control ioctl
- */
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/uaccess.h>
-#include <linux/io.h>
-#include <linux/videodev2.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/module.h>
-
-#include <mach/mux.h>
-
-#include <media/davinci/isif.h>
-#include <media/davinci/vpss.h>
-
-#include "isif_regs.h"
-#include "ccdc_hw_device.h"
-
-/* Defaults for module configuration parameters */
-static struct isif_config_params_raw isif_config_defaults = {
-	.linearize = {
-		.en = 0,
-		.corr_shft = ISIF_NO_SHIFT,
-		.scale_fact = {1, 0},
-	},
-	.df_csc = {
-		.df_or_csc = 0,
-		.csc = {
-			.en = 0,
-		},
-	},
-	.dfc = {
-		.en = 0,
-	},
-	.bclamp = {
-		.en = 0,
-	},
-	.gain_offset = {
-		.gain = {
-			.r_ye = {1, 0},
-			.gr_cy = {1, 0},
-			.gb_g = {1, 0},
-			.b_mg = {1, 0},
-		},
-	},
-	.culling = {
-		.hcpat_odd = 0xff,
-		.hcpat_even = 0xff,
-		.vcpat = 0xff,
-	},
-	.compress = {
-		.alg = ISIF_ALAW,
-	},
-};
-
-/* ISIF operation configuration */
-static struct isif_oper_config {
-	struct device *dev;
-	enum vpfe_hw_if_type if_type;
-	struct isif_ycbcr_config ycbcr;
-	struct isif_params_raw bayer;
-	enum isif_data_pack data_pack;
-	/* Master clock */
-	struct clk *mclk;
-	/* ISIF base address */
-	void __iomem *base_addr;
-	/* ISIF Linear Table 0 */
-	void __iomem *linear_tbl0_addr;
-	/* ISIF Linear Table 1 */
-	void __iomem *linear_tbl1_addr;
-} isif_cfg = {
-	.ycbcr = {
-		.pix_fmt = CCDC_PIXFMT_YCBCR_8BIT,
-		.frm_fmt = CCDC_FRMFMT_INTERLACED,
-		.win = ISIF_WIN_NTSC,
-		.fid_pol = VPFE_PINPOL_POSITIVE,
-		.vd_pol = VPFE_PINPOL_POSITIVE,
-		.hd_pol = VPFE_PINPOL_POSITIVE,
-		.pix_order = CCDC_PIXORDER_CBYCRY,
-		.buf_type = CCDC_BUFTYPE_FLD_INTERLEAVED,
-	},
-	.bayer = {
-		.pix_fmt = CCDC_PIXFMT_RAW,
-		.frm_fmt = CCDC_FRMFMT_PROGRESSIVE,
-		.win = ISIF_WIN_VGA,
-		.fid_pol = VPFE_PINPOL_POSITIVE,
-		.vd_pol = VPFE_PINPOL_POSITIVE,
-		.hd_pol = VPFE_PINPOL_POSITIVE,
-		.gain = {
-			.r_ye = {1, 0},
-			.gr_cy = {1, 0},
-			.gb_g = {1, 0},
-			.b_mg = {1, 0},
-		},
-		.cfa_pat = ISIF_CFA_PAT_MOSAIC,
-		.data_msb = ISIF_BIT_MSB_11,
-		.config_params = {
-			.data_shift = ISIF_NO_SHIFT,
-			.col_pat_field0 = {
-				.olop = ISIF_GREEN_BLUE,
-				.olep = ISIF_BLUE,
-				.elop = ISIF_RED,
-				.elep = ISIF_GREEN_RED,
-			},
-			.col_pat_field1 = {
-				.olop = ISIF_GREEN_BLUE,
-				.olep = ISIF_BLUE,
-				.elop = ISIF_RED,
-				.elep = ISIF_GREEN_RED,
-			},
-			.test_pat_gen = 0,
-		},
-	},
-	.data_pack = ISIF_DATA_PACK8,
-};
-
-/* Raw Bayer formats */
-static const u32 isif_raw_bayer_pix_formats[] = {
-	V4L2_PIX_FMT_SBGGR8, V4L2_PIX_FMT_SBGGR16};
-
-/* Raw YUV formats */
-static const u32 isif_raw_yuv_pix_formats[] = {
-	V4L2_PIX_FMT_UYVY, V4L2_PIX_FMT_YUYV};
-
-/* register access routines */
-static inline u32 regr(u32 offset)
-{
-	return __raw_readl(isif_cfg.base_addr + offset);
-}
-
-static inline void regw(u32 val, u32 offset)
-{
-	__raw_writel(val, isif_cfg.base_addr + offset);
-}
-
-/* reg_modify() - read, modify and write register */
-static inline u32 reg_modify(u32 mask, u32 val, u32 offset)
-{
-	u32 new_val = (regr(offset) & ~mask) | (val & mask);
-
-	regw(new_val, offset);
-	return new_val;
-}
-
-static inline void regw_lin_tbl(u32 val, u32 offset, int i)
-{
-	if (!i)
-		__raw_writel(val, isif_cfg.linear_tbl0_addr + offset);
-	else
-		__raw_writel(val, isif_cfg.linear_tbl1_addr + offset);
-}
-
-static void isif_disable_all_modules(void)
-{
-	/* disable BC */
-	regw(0, CLAMPCFG);
-	/* disable vdfc */
-	regw(0, DFCCTL);
-	/* disable CSC */
-	regw(0, CSCCTL);
-	/* disable linearization */
-	regw(0, LINCFG0);
-	/* disable other modules here as they are supported */
-}
-
-static void isif_enable(int en)
-{
-	if (!en) {
-		/* Before disable isif, disable all ISIF modules */
-		isif_disable_all_modules();
-		/*
-		 * wait for next VD. Assume lowest scan rate is 12 Hz. So
-		 * 100 msec delay is good enough
-		 */
-		msleep(100);
-	}
-	reg_modify(ISIF_SYNCEN_VDHDEN_MASK, en, SYNCEN);
-}
-
-static void isif_enable_output_to_sdram(int en)
-{
-	reg_modify(ISIF_SYNCEN_WEN_MASK, en << ISIF_SYNCEN_WEN_SHIFT, SYNCEN);
-}
-
-static void isif_config_culling(struct isif_cul *cul)
-{
-	u32 val;
-
-	/* Horizontal pattern */
-	val = (cul->hcpat_even << CULL_PAT_EVEN_LINE_SHIFT) | cul->hcpat_odd;
-	regw(val, CULH);
-
-	/* vertical pattern */
-	regw(cul->vcpat, CULV);
-
-	/* LPF */
-	reg_modify(ISIF_LPF_MASK << ISIF_LPF_SHIFT,
-		  cul->en_lpf << ISIF_LPF_SHIFT, MODESET);
-}
-
-static void isif_config_gain_offset(void)
-{
-	struct isif_gain_offsets_adj *gain_off_p =
-		&isif_cfg.bayer.config_params.gain_offset;
-	u32 val;
-
-	val = (!!gain_off_p->gain_sdram_en << GAIN_SDRAM_EN_SHIFT) |
-	      (!!gain_off_p->gain_ipipe_en << GAIN_IPIPE_EN_SHIFT) |
-	      (!!gain_off_p->gain_h3a_en << GAIN_H3A_EN_SHIFT) |
-	      (!!gain_off_p->offset_sdram_en << OFST_SDRAM_EN_SHIFT) |
-	      (!!gain_off_p->offset_ipipe_en << OFST_IPIPE_EN_SHIFT) |
-	      (!!gain_off_p->offset_h3a_en << OFST_H3A_EN_SHIFT);
-
-	reg_modify(GAIN_OFFSET_EN_MASK, val, CGAMMAWD);
-
-	val = (gain_off_p->gain.r_ye.integer << GAIN_INTEGER_SHIFT) |
-	       gain_off_p->gain.r_ye.decimal;
-	regw(val, CRGAIN);
-
-	val = (gain_off_p->gain.gr_cy.integer << GAIN_INTEGER_SHIFT) |
-	       gain_off_p->gain.gr_cy.decimal;
-	regw(val, CGRGAIN);
-
-	val = (gain_off_p->gain.gb_g.integer << GAIN_INTEGER_SHIFT) |
-	       gain_off_p->gain.gb_g.decimal;
-	regw(val, CGBGAIN);
-
-	val = (gain_off_p->gain.b_mg.integer << GAIN_INTEGER_SHIFT) |
-	       gain_off_p->gain.b_mg.decimal;
-	regw(val, CBGAIN);
-
-	regw(gain_off_p->offset, COFSTA);
-}
-
-static void isif_restore_defaults(void)
-{
-	enum vpss_ccdc_source_sel source = VPSS_CCDCIN;
-
-	dev_dbg(isif_cfg.dev, "\nstarting isif_restore_defaults...");
-	isif_cfg.bayer.config_params = isif_config_defaults;
-	/* Enable clock to ISIF, IPIPEIF and BL */
-	vpss_enable_clock(VPSS_CCDC_CLOCK, 1);
-	vpss_enable_clock(VPSS_IPIPEIF_CLOCK, 1);
-	vpss_enable_clock(VPSS_BL_CLOCK, 1);
-	/* Set default offset and gain */
-	isif_config_gain_offset();
-	vpss_select_ccdc_source(source);
-	dev_dbg(isif_cfg.dev, "\nEnd of isif_restore_defaults...");
-}
-
-static int isif_open(struct device *device)
-{
-	isif_restore_defaults();
-	return 0;
-}
-
-/* This function will configure the window size to be capture in ISIF reg */
-static void isif_setwin(struct v4l2_rect *image_win,
-			enum ccdc_frmfmt frm_fmt, int ppc)
-{
-	int horz_start, horz_nr_pixels;
-	int vert_start, vert_nr_lines;
-	int mid_img = 0;
-
-	dev_dbg(isif_cfg.dev, "\nStarting isif_setwin...");
-	/*
-	 * ppc - per pixel count. indicates how many pixels per cell
-	 * output to SDRAM. example, for ycbcr, it is one y and one c, so 2.
-	 * raw capture this is 1
-	 */
-	horz_start = image_win->left << (ppc - 1);
-	horz_nr_pixels = ((image_win->width) << (ppc - 1)) - 1;
-
-	/* Writing the horizontal info into the registers */
-	regw(horz_start & START_PX_HOR_MASK, SPH);
-	regw(horz_nr_pixels & NUM_PX_HOR_MASK, LNH);
-	vert_start = image_win->top;
-
-	if (frm_fmt == CCDC_FRMFMT_INTERLACED) {
-		vert_nr_lines = (image_win->height >> 1) - 1;
-		vert_start >>= 1;
-		/* To account for VD since line 0 doesn't have any data */
-		vert_start += 1;
-	} else {
-		/* To account for VD since line 0 doesn't have any data */
-		vert_start += 1;
-		vert_nr_lines = image_win->height - 1;
-		/* configure VDINT0 and VDINT1 */
-		mid_img = vert_start + (image_win->height / 2);
-		regw(mid_img, VDINT1);
-	}
-
-	regw(0, VDINT0);
-	regw(vert_start & START_VER_ONE_MASK, SLV0);
-	regw(vert_start & START_VER_TWO_MASK, SLV1);
-	regw(vert_nr_lines & NUM_LINES_VER, LNV);
-}
-
-static void isif_config_bclamp(struct isif_black_clamp *bc)
-{
-	u32 val;
-
-	/*
-	 * DC Offset is always added to image data irrespective of bc enable
-	 * status
-	 */
-	regw(bc->dc_offset, CLDCOFST);
-
-	if (bc->en) {
-		val = bc->bc_mode_color << ISIF_BC_MODE_COLOR_SHIFT;
-
-		/* Enable BC and horizontal clamp caculation paramaters */
-		val = val | 1 | (bc->horz.mode << ISIF_HORZ_BC_MODE_SHIFT);
-
-		regw(val, CLAMPCFG);
-
-		if (bc->horz.mode != ISIF_HORZ_BC_DISABLE) {
-			/*
-			 * Window count for calculation
-			 * Base window selection
-			 * pixel limit
-			 * Horizontal size of window
-			 * vertical size of the window
-			 * Horizontal start position of the window
-			 * Vertical start position of the window
-			 */
-			val = bc->horz.win_count_calc |
-			      ((!!bc->horz.base_win_sel_calc) <<
-				ISIF_HORZ_BC_WIN_SEL_SHIFT) |
-			      ((!!bc->horz.clamp_pix_limit) <<
-				ISIF_HORZ_BC_PIX_LIMIT_SHIFT) |
-			      (bc->horz.win_h_sz_calc <<
-				ISIF_HORZ_BC_WIN_H_SIZE_SHIFT) |
-			      (bc->horz.win_v_sz_calc <<
-				ISIF_HORZ_BC_WIN_V_SIZE_SHIFT);
-			regw(val, CLHWIN0);
-
-			regw(bc->horz.win_start_h_calc, CLHWIN1);
-			regw(bc->horz.win_start_v_calc, CLHWIN2);
-		}
-
-		/* vertical clamp caculation paramaters */
-
-		/* Reset clamp value sel for previous line */
-		val |=
-		(bc->vert.reset_val_sel << ISIF_VERT_BC_RST_VAL_SEL_SHIFT) |
-		(bc->vert.line_ave_coef << ISIF_VERT_BC_LINE_AVE_COEF_SHIFT);
-		regw(val, CLVWIN0);
-
-		/* Optical Black horizontal start position */
-		regw(bc->vert.ob_start_h, CLVWIN1);
-		/* Optical Black vertical start position */
-		regw(bc->vert.ob_start_v, CLVWIN2);
-		/* Optical Black vertical size for calculation */
-		regw(bc->vert.ob_v_sz_calc, CLVWIN3);
-		/* Vertical start position for BC subtraction */
-		regw(bc->vert_start_sub, CLSV);
-	}
-}
-
-static void isif_config_linearization(struct isif_linearize *linearize)
-{
-	u32 val, i;
-
-	if (!linearize->en) {
-		regw(0, LINCFG0);
-		return;
-	}
-
-	/* shift value for correction & enable linearization (set lsb) */
-	val = (linearize->corr_shft << ISIF_LIN_CORRSFT_SHIFT) | 1;
-	regw(val, LINCFG0);
-
-	/* Scale factor */
-	val = ((!!linearize->scale_fact.integer) <<
-	       ISIF_LIN_SCALE_FACT_INTEG_SHIFT) |
-	       linearize->scale_fact.decimal;
-	regw(val, LINCFG1);
-
-	for (i = 0; i < ISIF_LINEAR_TAB_SIZE; i++) {
-		if (i % 2)
-			regw_lin_tbl(linearize->table[i], ((i >> 1) << 2), 1);
-		else
-			regw_lin_tbl(linearize->table[i], ((i >> 1) << 2), 0);
-	}
-}
-
-static int isif_config_dfc(struct isif_dfc *vdfc)
-{
-	/* initialize retries to loop for max ~ 250 usec */
-	u32 val, count, retries = loops_per_jiffy / (4000/HZ);
-	int i;
-
-	if (!vdfc->en)
-		return 0;
-
-	/* Correction mode */
-	val = (vdfc->corr_mode << ISIF_VDFC_CORR_MOD_SHIFT);
-
-	/* Correct whole line or partial */
-	if (vdfc->corr_whole_line)
-		val |= 1 << ISIF_VDFC_CORR_WHOLE_LN_SHIFT;
-
-	/* level shift value */
-	val |= vdfc->def_level_shift << ISIF_VDFC_LEVEL_SHFT_SHIFT;
-
-	regw(val, DFCCTL);
-
-	/* Defect saturation level */
-	regw(vdfc->def_sat_level, VDFSATLV);
-
-	regw(vdfc->table[0].pos_vert, DFCMEM0);
-	regw(vdfc->table[0].pos_horz, DFCMEM1);
-	if (vdfc->corr_mode == ISIF_VDFC_NORMAL ||
-	    vdfc->corr_mode == ISIF_VDFC_HORZ_INTERPOL_IF_SAT) {
-		regw(vdfc->table[0].level_at_pos, DFCMEM2);
-		regw(vdfc->table[0].level_up_pixels, DFCMEM3);
-		regw(vdfc->table[0].level_low_pixels, DFCMEM4);
-	}
-
-	/* set DFCMARST and set DFCMWR */
-	val = regr(DFCMEMCTL) | (1 << ISIF_DFCMEMCTL_DFCMARST_SHIFT) | 1;
-	regw(val, DFCMEMCTL);
-
-	count = retries;
-	while (count && (regr(DFCMEMCTL) & 0x1))
-		count--;
-
-	if (!count) {
-		dev_dbg(isif_cfg.dev, "defect table write timeout !!!\n");
-		return -1;
-	}
-
-	for (i = 1; i < vdfc->num_vdefects; i++) {
-		regw(vdfc->table[i].pos_vert, DFCMEM0);
-		regw(vdfc->table[i].pos_horz, DFCMEM1);
-		if (vdfc->corr_mode == ISIF_VDFC_NORMAL ||
-		    vdfc->corr_mode == ISIF_VDFC_HORZ_INTERPOL_IF_SAT) {
-			regw(vdfc->table[i].level_at_pos, DFCMEM2);
-			regw(vdfc->table[i].level_up_pixels, DFCMEM3);
-			regw(vdfc->table[i].level_low_pixels, DFCMEM4);
-		}
-		val = regr(DFCMEMCTL);
-		/* clear DFCMARST and set DFCMWR */
-		val &= ~BIT(ISIF_DFCMEMCTL_DFCMARST_SHIFT);
-		val |= 1;
-		regw(val, DFCMEMCTL);
-
-		count = retries;
-		while (count && (regr(DFCMEMCTL) & 0x1))
-			count--;
-
-		if (!count) {
-			dev_err(isif_cfg.dev,
-				"defect table write timeout !!!\n");
-			return -1;
-		}
-	}
-	if (vdfc->num_vdefects < ISIF_VDFC_TABLE_SIZE) {
-		/* Extra cycle needed */
-		regw(0, DFCMEM0);
-		regw(0x1FFF, DFCMEM1);
-		regw(1, DFCMEMCTL);
-	}
-
-	/* enable VDFC */
-	reg_modify((1 << ISIF_VDFC_EN_SHIFT), (1 << ISIF_VDFC_EN_SHIFT),
-		   DFCCTL);
-	return 0;
-}
-
-static void isif_config_csc(struct isif_df_csc *df_csc)
-{
-	u32 val1 = 0, val2 = 0, i;
-
-	if (!df_csc->csc.en) {
-		regw(0, CSCCTL);
-		return;
-	}
-	for (i = 0; i < ISIF_CSC_NUM_COEFF; i++) {
-		if ((i % 2) == 0) {
-			/* CSCM - LSB */
-			val1 = (df_csc->csc.coeff[i].integer <<
-				ISIF_CSC_COEF_INTEG_SHIFT) |
-				df_csc->csc.coeff[i].decimal;
-		} else {
-
-			/* CSCM - MSB */
-			val2 = (df_csc->csc.coeff[i].integer <<
-				ISIF_CSC_COEF_INTEG_SHIFT) |
-				df_csc->csc.coeff[i].decimal;
-			val2 <<= ISIF_CSCM_MSB_SHIFT;
-			val2 |= val1;
-			regw(val2, (CSCM0 + ((i - 1) << 1)));
-		}
-	}
-
-	/* program the active area */
-	regw(df_csc->start_pix, FMTSPH);
-	/*
-	 * one extra pixel as required for CSC. Actually number of
-	 * pixel - 1 should be configured in this register. So we
-	 * need to subtract 1 before writing to FMTSPH, but we will
-	 * not do this since csc requires one extra pixel
-	 */
-	regw(df_csc->num_pixels, FMTLNH);
-	regw(df_csc->start_line, FMTSLV);
-	/*
-	 * one extra line as required for CSC. See reason documented for
-	 * num_pixels
-	 */
-	regw(df_csc->num_lines, FMTLNV);
-
-	/* Enable CSC */
-	regw(1, CSCCTL);
-}
-
-static int isif_config_raw(void)
-{
-	struct isif_params_raw *params = &isif_cfg.bayer;
-	struct isif_config_params_raw *module_params =
-		&isif_cfg.bayer.config_params;
-	struct vpss_pg_frame_size frame_size;
-	struct vpss_sync_pol sync;
-	u32 val;
-
-	dev_dbg(isif_cfg.dev, "\nStarting isif_config_raw..\n");
-
-	/*
-	 * Configure CCDCFG register:-
-	 * Set CCD Not to swap input since input is RAW data
-	 * Set FID detection function to Latch at V-Sync
-	 * Set WENLOG - isif valid area
-	 * Set TRGSEL
-	 * Set EXTRG
-	 * Packed to 8 or 16 bits
-	 */
-
-	val = ISIF_YCINSWP_RAW | ISIF_CCDCFG_FIDMD_LATCH_VSYNC |
-		ISIF_CCDCFG_WENLOG_AND | ISIF_CCDCFG_TRGSEL_WEN |
-		ISIF_CCDCFG_EXTRG_DISABLE | isif_cfg.data_pack;
-
-	dev_dbg(isif_cfg.dev, "Writing 0x%x to ...CCDCFG \n", val);
-	regw(val, CCDCFG);
-
-	/*
-	 * Configure the vertical sync polarity(MODESET.VDPOL)
-	 * Configure the horizontal sync polarity (MODESET.HDPOL)
-	 * Configure frame id polarity (MODESET.FLDPOL)
-	 * Configure data polarity
-	 * Configure External WEN Selection
-	 * Configure frame format(progressive or interlace)
-	 * Configure pixel format (Input mode)
-	 * Configure the data shift
-	 */
-
-	val = ISIF_VDHDOUT_INPUT | (params->vd_pol << ISIF_VD_POL_SHIFT) |
-		(params->hd_pol << ISIF_HD_POL_SHIFT) |
-		(params->fid_pol << ISIF_FID_POL_SHIFT) |
-		(ISIF_DATAPOL_NORMAL << ISIF_DATAPOL_SHIFT) |
-		(ISIF_EXWEN_DISABLE << ISIF_EXWEN_SHIFT) |
-		(params->frm_fmt << ISIF_FRM_FMT_SHIFT) |
-		(params->pix_fmt << ISIF_INPUT_SHIFT) |
-		(params->config_params.data_shift << ISIF_DATASFT_SHIFT);
-
-	regw(val, MODESET);
-	dev_dbg(isif_cfg.dev, "Writing 0x%x to MODESET...\n", val);
-
-	/*
-	 * Configure GAMMAWD register
-	 * CFA pattern setting
-	 */
-	val = params->cfa_pat << ISIF_GAMMAWD_CFA_SHIFT;
-
-	/* Gamma msb */
-	if (module_params->compress.alg == ISIF_ALAW)
-		val |= ISIF_ALAW_ENABLE;
-
-	val |= (params->data_msb << ISIF_ALAW_GAMA_WD_SHIFT);
-	regw(val, CGAMMAWD);
-
-	/* Configure DPCM compression settings */
-	if (module_params->compress.alg == ISIF_DPCM) {
-		val =  BIT(ISIF_DPCM_EN_SHIFT) |
-		       (module_params->compress.pred <<
-		       ISIF_DPCM_PREDICTOR_SHIFT);
-	}
-
-	regw(val, MISC);
-
-	/* Configure Gain & Offset */
-	isif_config_gain_offset();
-
-	/* Configure Color pattern */
-	val = (params->config_params.col_pat_field0.olop) |
-	      (params->config_params.col_pat_field0.olep << 2) |
-	      (params->config_params.col_pat_field0.elop << 4) |
-	      (params->config_params.col_pat_field0.elep << 6) |
-	      (params->config_params.col_pat_field1.olop << 8) |
-	      (params->config_params.col_pat_field1.olep << 10) |
-	      (params->config_params.col_pat_field1.elop << 12) |
-	      (params->config_params.col_pat_field1.elep << 14);
-	regw(val, CCOLP);
-	dev_dbg(isif_cfg.dev, "Writing %x to CCOLP ...\n", val);
-
-	/* Configure HSIZE register  */
-	val = (!!params->horz_flip_en) << ISIF_HSIZE_FLIP_SHIFT;
-
-	/* calculate line offset in 32 bytes based on pack value */
-	if (isif_cfg.data_pack == ISIF_PACK_8BIT)
-		val |= ((params->win.width + 31) >> 5);
-	else if (isif_cfg.data_pack == ISIF_PACK_12BIT)
-		val |= (((params->win.width +
-		       (params->win.width >> 2)) + 31) >> 5);
-	else
-		val |= (((params->win.width * 2) + 31) >> 5);
-	regw(val, HSIZE);
-
-	/* Configure SDOFST register  */
-	if (params->frm_fmt == CCDC_FRMFMT_INTERLACED) {
-		if (params->image_invert_en) {
-			/* For interlace inverse mode */
-			regw(0x4B6D, SDOFST);
-			dev_dbg(isif_cfg.dev, "Writing 0x4B6D to SDOFST...\n");
-		} else {
-			/* For interlace non inverse mode */
-			regw(0x0B6D, SDOFST);
-			dev_dbg(isif_cfg.dev, "Writing 0x0B6D to SDOFST...\n");
-		}
-	} else if (params->frm_fmt == CCDC_FRMFMT_PROGRESSIVE) {
-		if (params->image_invert_en) {
-			/* For progressive inverse mode */
-			regw(0x4000, SDOFST);
-			dev_dbg(isif_cfg.dev, "Writing 0x4000 to SDOFST...\n");
-		} else {
-			/* For progressive non inverse mode */
-			regw(0x0000, SDOFST);
-			dev_dbg(isif_cfg.dev, "Writing 0x0000 to SDOFST...\n");
-		}
-	}
-
-	/* Configure video window */
-	isif_setwin(&params->win, params->frm_fmt, 1);
-
-	/* Configure Black Clamp */
-	isif_config_bclamp(&module_params->bclamp);
-
-	/* Configure Vertical Defection Pixel Correction */
-	if (isif_config_dfc(&module_params->dfc) < 0)
-		return -EFAULT;
-
-	if (!module_params->df_csc.df_or_csc)
-		/* Configure Color Space Conversion */
-		isif_config_csc(&module_params->df_csc);
-
-	isif_config_linearization(&module_params->linearize);
-
-	/* Configure Culling */
-	isif_config_culling(&module_params->culling);
-
-	/* Configure horizontal and vertical offsets(DFC,LSC,Gain) */
-	regw(module_params->horz_offset, DATAHOFST);
-	regw(module_params->vert_offset, DATAVOFST);
-
-	/* Setup test pattern if enabled */
-	if (params->config_params.test_pat_gen) {
-		/* Use the HD/VD pol settings from user */
-		sync.ccdpg_hdpol = params->hd_pol;
-		sync.ccdpg_vdpol = params->vd_pol;
-		dm365_vpss_set_sync_pol(sync);
-		frame_size.hlpfr = isif_cfg.bayer.win.width;
-		frame_size.pplen = isif_cfg.bayer.win.height;
-		dm365_vpss_set_pg_frame_size(frame_size);
-		vpss_select_ccdc_source(VPSS_PGLPBK);
-	}
-
-	dev_dbg(isif_cfg.dev, "\nEnd of isif_config_ycbcr...\n");
-	return 0;
-}
-
-static int isif_set_buftype(enum ccdc_buftype buf_type)
-{
-	if (isif_cfg.if_type == VPFE_RAW_BAYER)
-		isif_cfg.bayer.buf_type = buf_type;
-	else
-		isif_cfg.ycbcr.buf_type = buf_type;
-
-	return 0;
-
-}
-static enum ccdc_buftype isif_get_buftype(void)
-{
-	if (isif_cfg.if_type == VPFE_RAW_BAYER)
-		return isif_cfg.bayer.buf_type;
-
-	return isif_cfg.ycbcr.buf_type;
-}
-
-static int isif_enum_pix(u32 *pix, int i)
-{
-	int ret = -EINVAL;
-
-	if (isif_cfg.if_type == VPFE_RAW_BAYER) {
-		if (i < ARRAY_SIZE(isif_raw_bayer_pix_formats)) {
-			*pix = isif_raw_bayer_pix_formats[i];
-			ret = 0;
-		}
-	} else {
-		if (i < ARRAY_SIZE(isif_raw_yuv_pix_formats)) {
-			*pix = isif_raw_yuv_pix_formats[i];
-			ret = 0;
-		}
-	}
-
-	return ret;
-}
-
-static int isif_set_pixel_format(unsigned int pixfmt)
-{
-	if (isif_cfg.if_type == VPFE_RAW_BAYER) {
-		if (pixfmt == V4L2_PIX_FMT_SBGGR8) {
-			if ((isif_cfg.bayer.config_params.compress.alg !=
-			     ISIF_ALAW) &&
-			    (isif_cfg.bayer.config_params.compress.alg !=
-			     ISIF_DPCM)) {
-				dev_dbg(isif_cfg.dev,
-					"Either configure A-Law or DPCM\n");
-				return -EINVAL;
-			}
-			isif_cfg.data_pack = ISIF_PACK_8BIT;
-		} else if (pixfmt == V4L2_PIX_FMT_SBGGR16) {
-			isif_cfg.bayer.config_params.compress.alg =
-					ISIF_NO_COMPRESSION;
-			isif_cfg.data_pack = ISIF_PACK_16BIT;
-		} else
-			return -EINVAL;
-		isif_cfg.bayer.pix_fmt = CCDC_PIXFMT_RAW;
-	} else {
-		if (pixfmt == V4L2_PIX_FMT_YUYV)
-			isif_cfg.ycbcr.pix_order = CCDC_PIXORDER_YCBYCR;
-		else if (pixfmt == V4L2_PIX_FMT_UYVY)
-			isif_cfg.ycbcr.pix_order = CCDC_PIXORDER_CBYCRY;
-		else
-			return -EINVAL;
-		isif_cfg.data_pack = ISIF_PACK_8BIT;
-	}
-	return 0;
-}
-
-static u32 isif_get_pixel_format(void)
-{
-	u32 pixfmt;
-
-	if (isif_cfg.if_type == VPFE_RAW_BAYER)
-		if (isif_cfg.bayer.config_params.compress.alg == ISIF_ALAW ||
-		    isif_cfg.bayer.config_params.compress.alg == ISIF_DPCM)
-			pixfmt = V4L2_PIX_FMT_SBGGR8;
-		else
-			pixfmt = V4L2_PIX_FMT_SBGGR16;
-	else {
-		if (isif_cfg.ycbcr.pix_order == CCDC_PIXORDER_YCBYCR)
-			pixfmt = V4L2_PIX_FMT_YUYV;
-		else
-			pixfmt = V4L2_PIX_FMT_UYVY;
-	}
-	return pixfmt;
-}
-
-static int isif_set_image_window(struct v4l2_rect *win)
-{
-	if (isif_cfg.if_type == VPFE_RAW_BAYER) {
-		isif_cfg.bayer.win.top = win->top;
-		isif_cfg.bayer.win.left = win->left;
-		isif_cfg.bayer.win.width = win->width;
-		isif_cfg.bayer.win.height = win->height;
-	} else {
-		isif_cfg.ycbcr.win.top = win->top;
-		isif_cfg.ycbcr.win.left = win->left;
-		isif_cfg.ycbcr.win.width = win->width;
-		isif_cfg.ycbcr.win.height = win->height;
-	}
-	return 0;
-}
-
-static void isif_get_image_window(struct v4l2_rect *win)
-{
-	if (isif_cfg.if_type == VPFE_RAW_BAYER)
-		*win = isif_cfg.bayer.win;
-	else
-		*win = isif_cfg.ycbcr.win;
-}
-
-static unsigned int isif_get_line_length(void)
-{
-	unsigned int len;
-
-	if (isif_cfg.if_type == VPFE_RAW_BAYER) {
-		if (isif_cfg.data_pack == ISIF_PACK_8BIT)
-			len = ((isif_cfg.bayer.win.width));
-		else if (isif_cfg.data_pack == ISIF_PACK_12BIT)
-			len = (((isif_cfg.bayer.win.width * 2) +
-				 (isif_cfg.bayer.win.width >> 2)));
-		else
-			len = (((isif_cfg.bayer.win.width * 2)));
-	} else
-		len = (((isif_cfg.ycbcr.win.width * 2)));
-	return ALIGN(len, 32);
-}
-
-static int isif_set_frame_format(enum ccdc_frmfmt frm_fmt)
-{
-	if (isif_cfg.if_type == VPFE_RAW_BAYER)
-		isif_cfg.bayer.frm_fmt = frm_fmt;
-	else
-		isif_cfg.ycbcr.frm_fmt = frm_fmt;
-	return 0;
-}
-static enum ccdc_frmfmt isif_get_frame_format(void)
-{
-	if (isif_cfg.if_type == VPFE_RAW_BAYER)
-		return isif_cfg.bayer.frm_fmt;
-	return isif_cfg.ycbcr.frm_fmt;
-}
-
-static int isif_getfid(void)
-{
-	return (regr(MODESET) >> 15) & 0x1;
-}
-
-/* misc operations */
-static void isif_setfbaddr(unsigned long addr)
-{
-	regw((addr >> 21) & 0x07ff, CADU);
-	regw((addr >> 5) & 0x0ffff, CADL);
-}
-
-static int isif_set_hw_if_params(struct vpfe_hw_if_param *params)
-{
-	isif_cfg.if_type = params->if_type;
-
-	switch (params->if_type) {
-	case VPFE_BT656:
-	case VPFE_BT656_10BIT:
-	case VPFE_YCBCR_SYNC_8:
-		isif_cfg.ycbcr.pix_fmt = CCDC_PIXFMT_YCBCR_8BIT;
-		isif_cfg.ycbcr.pix_order = CCDC_PIXORDER_CBYCRY;
-		break;
-	case VPFE_BT1120:
-	case VPFE_YCBCR_SYNC_16:
-		isif_cfg.ycbcr.pix_fmt = CCDC_PIXFMT_YCBCR_16BIT;
-		isif_cfg.ycbcr.pix_order = CCDC_PIXORDER_CBYCRY;
-		break;
-	case VPFE_RAW_BAYER:
-		isif_cfg.bayer.pix_fmt = CCDC_PIXFMT_RAW;
-		break;
-	default:
-		dev_dbg(isif_cfg.dev, "Invalid interface type\n");
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-/* This function will configure ISIF for YCbCr parameters. */
-static int isif_config_ycbcr(void)
-{
-	struct isif_ycbcr_config *params = &isif_cfg.ycbcr;
-	struct vpss_pg_frame_size frame_size;
-	u32 modeset = 0, ccdcfg = 0;
-	struct vpss_sync_pol sync;
-
-	dev_dbg(isif_cfg.dev, "\nStarting isif_config_ycbcr...");
-
-	/* configure pixel format or input mode */
-	modeset = modeset | (params->pix_fmt << ISIF_INPUT_SHIFT) |
-		  (params->frm_fmt << ISIF_FRM_FMT_SHIFT) |
-		  (params->fid_pol << ISIF_FID_POL_SHIFT) |
-		  (params->hd_pol << ISIF_HD_POL_SHIFT) |
-		  (params->vd_pol << ISIF_VD_POL_SHIFT);
-
-	/* pack the data to 8-bit ISIFCFG */
-	switch (isif_cfg.if_type) {
-	case VPFE_BT656:
-		if (params->pix_fmt != CCDC_PIXFMT_YCBCR_8BIT) {
-			dev_dbg(isif_cfg.dev, "Invalid pix_fmt(input mode)\n");
-			return -EINVAL;
-		}
-		modeset |= (VPFE_PINPOL_NEGATIVE << ISIF_VD_POL_SHIFT);
-		regw(3, REC656IF);
-		ccdcfg = ccdcfg | ISIF_DATA_PACK8 | ISIF_YCINSWP_YCBCR;
-		break;
-	case VPFE_BT656_10BIT:
-		if (params->pix_fmt != CCDC_PIXFMT_YCBCR_8BIT) {
-			dev_dbg(isif_cfg.dev, "Invalid pix_fmt(input mode)\n");
-			return -EINVAL;
-		}
-		/* setup BT.656, embedded sync  */
-		regw(3, REC656IF);
-		/* enable 10 bit mode in ccdcfg */
-		ccdcfg = ccdcfg | ISIF_DATA_PACK8 | ISIF_YCINSWP_YCBCR |
-			ISIF_BW656_ENABLE;
-		break;
-	case VPFE_BT1120:
-		if (params->pix_fmt != CCDC_PIXFMT_YCBCR_16BIT) {
-			dev_dbg(isif_cfg.dev, "Invalid pix_fmt(input mode)\n");
-			return -EINVAL;
-		}
-		regw(3, REC656IF);
-		break;
-
-	case VPFE_YCBCR_SYNC_8:
-		ccdcfg |= ISIF_DATA_PACK8;
-		ccdcfg |= ISIF_YCINSWP_YCBCR;
-		if (params->pix_fmt != CCDC_PIXFMT_YCBCR_8BIT) {
-			dev_dbg(isif_cfg.dev, "Invalid pix_fmt(input mode)\n");
-			return -EINVAL;
-		}
-		break;
-	case VPFE_YCBCR_SYNC_16:
-		if (params->pix_fmt != CCDC_PIXFMT_YCBCR_16BIT) {
-			dev_dbg(isif_cfg.dev, "Invalid pix_fmt(input mode)\n");
-			return -EINVAL;
-		}
-		break;
-	default:
-		/* should never come here */
-		dev_dbg(isif_cfg.dev, "Invalid interface type\n");
-		return -EINVAL;
-	}
-
-	regw(modeset, MODESET);
-
-	/* Set up pix order */
-	ccdcfg |= params->pix_order << ISIF_PIX_ORDER_SHIFT;
-
-	regw(ccdcfg, CCDCFG);
-
-	/* configure video window */
-	if ((isif_cfg.if_type == VPFE_BT1120) ||
-	    (isif_cfg.if_type == VPFE_YCBCR_SYNC_16))
-		isif_setwin(&params->win, params->frm_fmt, 1);
-	else
-		isif_setwin(&params->win, params->frm_fmt, 2);
-
-	/*
-	 * configure the horizontal line offset
-	 * this is done by rounding up width to a multiple of 16 pixels
-	 * and multiply by two to account for y:cb:cr 4:2:2 data
-	 */
-	regw(((((params->win.width * 2) + 31) & 0xffffffe0) >> 5), HSIZE);
-
-	/* configure the memory line offset */
-	if ((params->frm_fmt == CCDC_FRMFMT_INTERLACED) &&
-	    (params->buf_type == CCDC_BUFTYPE_FLD_INTERLEAVED))
-		/* two fields are interleaved in memory */
-		regw(0x00000249, SDOFST);
-
-	/* Setup test pattern if enabled */
-	if (isif_cfg.bayer.config_params.test_pat_gen) {
-		sync.ccdpg_hdpol = params->hd_pol;
-		sync.ccdpg_vdpol = params->vd_pol;
-		dm365_vpss_set_sync_pol(sync);
-		dm365_vpss_set_pg_frame_size(frame_size);
-	}
-	return 0;
-}
-
-static int isif_configure(void)
-{
-	if (isif_cfg.if_type == VPFE_RAW_BAYER)
-		return isif_config_raw();
-	return isif_config_ycbcr();
-}
-
-static int isif_close(struct device *device)
-{
-	/* copy defaults to module params */
-	isif_cfg.bayer.config_params = isif_config_defaults;
-	return 0;
-}
-
-static struct ccdc_hw_device isif_hw_dev = {
-	.name = "ISIF",
-	.owner = THIS_MODULE,
-	.hw_ops = {
-		.open = isif_open,
-		.close = isif_close,
-		.enable = isif_enable,
-		.enable_out_to_sdram = isif_enable_output_to_sdram,
-		.set_hw_if_params = isif_set_hw_if_params,
-		.configure = isif_configure,
-		.set_buftype = isif_set_buftype,
-		.get_buftype = isif_get_buftype,
-		.enum_pix = isif_enum_pix,
-		.set_pixel_format = isif_set_pixel_format,
-		.get_pixel_format = isif_get_pixel_format,
-		.set_frame_format = isif_set_frame_format,
-		.get_frame_format = isif_get_frame_format,
-		.set_image_window = isif_set_image_window,
-		.get_image_window = isif_get_image_window,
-		.get_line_length = isif_get_line_length,
-		.setfbaddr = isif_setfbaddr,
-		.getfid = isif_getfid,
-	},
-};
-
-static int __devinit isif_probe(struct platform_device *pdev)
-{
-	void (*setup_pinmux)(void);
-	struct resource	*res;
-	void *__iomem addr;
-	int status = 0, i;
-
-	/*
-	 * first try to register with vpfe. If not correct platform, then we
-	 * don't have to iomap
-	 */
-	status = vpfe_register_ccdc_device(&isif_hw_dev);
-	if (status < 0)
-		return status;
-
-	/* Get and enable Master clock */
-	isif_cfg.mclk = clk_get(&pdev->dev, "master");
-	if (IS_ERR(isif_cfg.mclk)) {
-		status = PTR_ERR(isif_cfg.mclk);
-		goto fail_mclk;
-	}
-	if (clk_enable(isif_cfg.mclk)) {
-		status = -ENODEV;
-		goto fail_mclk;
-	}
-
-	/* Platform data holds setup_pinmux function ptr */
-	if (NULL == pdev->dev.platform_data) {
-		status = -ENODEV;
-		goto fail_mclk;
-	}
-	setup_pinmux = pdev->dev.platform_data;
-	/*
-	 * setup Mux configuration for ccdc which may be different for
-	 * different SoCs using this CCDC
-	 */
-	setup_pinmux();
-
-	i = 0;
-	/* Get the ISIF base address, linearization table0 and table1 addr. */
-	while (i < 3) {
-		res = platform_get_resource(pdev, IORESOURCE_MEM, i);
-		if (!res) {
-			status = -ENODEV;
-			goto fail_nobase_res;
-		}
-		res = request_mem_region(res->start, resource_size(res),
-					 res->name);
-		if (!res) {
-			status = -EBUSY;
-			goto fail_nobase_res;
-		}
-		addr = ioremap_nocache(res->start, resource_size(res));
-		if (!addr) {
-			status = -ENOMEM;
-			goto fail_base_iomap;
-		}
-		switch (i) {
-		case 0:
-			/* ISIF base address */
-			isif_cfg.base_addr = addr;
-			break;
-		case 1:
-			/* ISIF linear tbl0 address */
-			isif_cfg.linear_tbl0_addr = addr;
-			break;
-		default:
-			/* ISIF linear tbl0 address */
-			isif_cfg.linear_tbl1_addr = addr;
-			break;
-		}
-		i++;
-	}
-	isif_cfg.dev = &pdev->dev;
-
-	printk(KERN_NOTICE "%s is registered with vpfe.\n",
-		isif_hw_dev.name);
-	return 0;
-fail_base_iomap:
-	release_mem_region(res->start, resource_size(res));
-	i--;
-fail_nobase_res:
-	if (isif_cfg.base_addr)
-		iounmap(isif_cfg.base_addr);
-	if (isif_cfg.linear_tbl0_addr)
-		iounmap(isif_cfg.linear_tbl0_addr);
-
-	while (i >= 0) {
-		res = platform_get_resource(pdev, IORESOURCE_MEM, i);
-		release_mem_region(res->start, resource_size(res));
-		i--;
-	}
-fail_mclk:
-	clk_put(isif_cfg.mclk);
-	vpfe_unregister_ccdc_device(&isif_hw_dev);
-	return status;
-}
-
-static int isif_remove(struct platform_device *pdev)
-{
-	struct resource	*res;
-	int i = 0;
-
-	iounmap(isif_cfg.base_addr);
-	iounmap(isif_cfg.linear_tbl0_addr);
-	iounmap(isif_cfg.linear_tbl1_addr);
-	while (i < 3) {
-		res = platform_get_resource(pdev, IORESOURCE_MEM, i);
-		if (res)
-			release_mem_region(res->start, resource_size(res));
-		i++;
-	}
-	vpfe_unregister_ccdc_device(&isif_hw_dev);
-	return 0;
-}
-
-static struct platform_driver isif_driver = {
-	.driver = {
-		.name	= "isif",
-		.owner = THIS_MODULE,
-	},
-	.remove = __devexit_p(isif_remove),
-	.probe = isif_probe,
-};
-
-module_platform_driver(isif_driver);
-
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/video/davinci/isif_regs.h b/drivers/media/video/davinci/isif_regs.h
deleted file mode 100644
index aa69a463c12..00000000000
--- a/drivers/media/video/davinci/isif_regs.h
+++ /dev/null
@@ -1,269 +0,0 @@
-/*
- * Copyright (C) 2008-2009 Texas Instruments Inc
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef _ISIF_REGS_H
-#define _ISIF_REGS_H
-
-/* ISIF registers relative offsets */
-#define SYNCEN					0x00
-#define MODESET					0x04
-#define HDW					0x08
-#define VDW					0x0c
-#define PPLN					0x10
-#define LPFR					0x14
-#define SPH					0x18
-#define LNH					0x1c
-#define SLV0					0x20
-#define SLV1					0x24
-#define LNV					0x28
-#define CULH					0x2c
-#define CULV					0x30
-#define HSIZE					0x34
-#define SDOFST					0x38
-#define CADU					0x3c
-#define CADL					0x40
-#define LINCFG0					0x44
-#define LINCFG1					0x48
-#define CCOLP					0x4c
-#define CRGAIN 					0x50
-#define CGRGAIN					0x54
-#define CGBGAIN					0x58
-#define CBGAIN					0x5c
-#define COFSTA					0x60
-#define FLSHCFG0				0x64
-#define FLSHCFG1				0x68
-#define FLSHCFG2				0x6c
-#define VDINT0					0x70
-#define VDINT1					0x74
-#define VDINT2					0x78
-#define MISC 					0x7c
-#define CGAMMAWD				0x80
-#define REC656IF				0x84
-#define CCDCFG					0x88
-/*****************************************************
-* Defect Correction registers
-*****************************************************/
-#define DFCCTL					0x8c
-#define VDFSATLV				0x90
-#define DFCMEMCTL				0x94
-#define DFCMEM0					0x98
-#define DFCMEM1					0x9c
-#define DFCMEM2					0xa0
-#define DFCMEM3					0xa4
-#define DFCMEM4					0xa8
-/****************************************************
-* Black Clamp registers
-****************************************************/
-#define CLAMPCFG				0xac
-#define CLDCOFST				0xb0
-#define CLSV					0xb4
-#define CLHWIN0					0xb8
-#define CLHWIN1					0xbc
-#define CLHWIN2					0xc0
-#define CLVRV					0xc4
-#define CLVWIN0					0xc8
-#define CLVWIN1					0xcc
-#define CLVWIN2					0xd0
-#define CLVWIN3					0xd4
-/****************************************************
-* Lense Shading Correction
-****************************************************/
-#define DATAHOFST				0xd8
-#define DATAVOFST				0xdc
-#define LSCHVAL					0xe0
-#define LSCVVAL					0xe4
-#define TWODLSCCFG				0xe8
-#define TWODLSCOFST				0xec
-#define TWODLSCINI				0xf0
-#define TWODLSCGRBU				0xf4
-#define TWODLSCGRBL				0xf8
-#define TWODLSCGROF				0xfc
-#define TWODLSCORBU				0x100
-#define TWODLSCORBL				0x104
-#define TWODLSCOROF				0x108
-#define TWODLSCIRQEN				0x10c
-#define TWODLSCIRQST				0x110
-/****************************************************
-* Data formatter
-****************************************************/
-#define FMTCFG					0x114
-#define FMTPLEN					0x118
-#define FMTSPH					0x11c
-#define FMTLNH					0x120
-#define FMTSLV					0x124
-#define FMTLNV					0x128
-#define FMTRLEN					0x12c
-#define FMTHCNT					0x130
-#define FMTAPTR_BASE				0x134
-/* Below macro for addresses FMTAPTR0 - FMTAPTR15 */
-#define FMTAPTR(i)			(FMTAPTR_BASE + (i * 4))
-#define FMTPGMVF0				0x174
-#define FMTPGMVF1				0x178
-#define FMTPGMAPU0				0x17c
-#define FMTPGMAPU1				0x180
-#define FMTPGMAPS0				0x184
-#define FMTPGMAPS1				0x188
-#define FMTPGMAPS2				0x18c
-#define FMTPGMAPS3				0x190
-#define FMTPGMAPS4				0x194
-#define FMTPGMAPS5				0x198
-#define FMTPGMAPS6				0x19c
-#define FMTPGMAPS7				0x1a0
-/************************************************
-* Color Space Converter
-************************************************/
-#define CSCCTL					0x1a4
-#define CSCM0					0x1a8
-#define CSCM1					0x1ac
-#define CSCM2					0x1b0
-#define CSCM3					0x1b4
-#define CSCM4					0x1b8
-#define CSCM5					0x1bc
-#define CSCM6					0x1c0
-#define CSCM7					0x1c4
-#define OBWIN0					0x1c8
-#define OBWIN1					0x1cc
-#define OBWIN2					0x1d0
-#define OBWIN3					0x1d4
-#define OBVAL0					0x1d8
-#define OBVAL1					0x1dc
-#define OBVAL2					0x1e0
-#define OBVAL3					0x1e4
-#define OBVAL4					0x1e8
-#define OBVAL5					0x1ec
-#define OBVAL6					0x1f0
-#define OBVAL7					0x1f4
-#define CLKCTL					0x1f8
-
-/* Masks & Shifts below */
-#define START_PX_HOR_MASK			0x7FFF
-#define NUM_PX_HOR_MASK				0x7FFF
-#define START_VER_ONE_MASK			0x7FFF
-#define START_VER_TWO_MASK			0x7FFF
-#define NUM_LINES_VER				0x7FFF
-
-/* gain - offset masks */
-#define GAIN_INTEGER_SHIFT			9
-#define OFFSET_MASK				0xFFF
-#define GAIN_SDRAM_EN_SHIFT			12
-#define GAIN_IPIPE_EN_SHIFT			13
-#define GAIN_H3A_EN_SHIFT			14
-#define OFST_SDRAM_EN_SHIFT			8
-#define OFST_IPIPE_EN_SHIFT			9
-#define OFST_H3A_EN_SHIFT			10
-#define GAIN_OFFSET_EN_MASK			0x7700
-
-/* Culling */
-#define CULL_PAT_EVEN_LINE_SHIFT		8
-
-/* CCDCFG register */
-#define ISIF_YCINSWP_RAW			(0x00 << 4)
-#define ISIF_YCINSWP_YCBCR			(0x01 << 4)
-#define ISIF_CCDCFG_FIDMD_LATCH_VSYNC		(0x00 << 6)
-#define ISIF_CCDCFG_WENLOG_AND			(0x00 << 8)
-#define ISIF_CCDCFG_TRGSEL_WEN			(0x00 << 9)
-#define ISIF_CCDCFG_EXTRG_DISABLE		(0x00 << 10)
-#define ISIF_LATCH_ON_VSYNC_DISABLE		(0x01 << 15)
-#define ISIF_LATCH_ON_VSYNC_ENABLE		(0x00 << 15)
-#define ISIF_DATA_PACK_MASK			3
-#define ISIF_DATA_PACK16			0
-#define ISIF_DATA_PACK12			1
-#define ISIF_DATA_PACK8				2
-#define ISIF_PIX_ORDER_SHIFT			11
-#define ISIF_BW656_ENABLE			(0x01 << 5)
-
-/* MODESET registers */
-#define ISIF_VDHDOUT_INPUT			(0x00 << 0)
-#define ISIF_INPUT_SHIFT			12
-#define ISIF_RAW_INPUT_MODE			0
-#define ISIF_FID_POL_SHIFT			4
-#define ISIF_HD_POL_SHIFT			3
-#define ISIF_VD_POL_SHIFT			2
-#define ISIF_DATAPOL_NORMAL			0
-#define ISIF_DATAPOL_SHIFT			6
-#define ISIF_EXWEN_DISABLE 			0
-#define ISIF_EXWEN_SHIFT			5
-#define ISIF_FRM_FMT_SHIFT			7
-#define ISIF_DATASFT_SHIFT			8
-#define ISIF_LPF_SHIFT				14
-#define ISIF_LPF_MASK				1
-
-/* GAMMAWD registers */
-#define ISIF_ALAW_GAMA_WD_MASK			0xF
-#define ISIF_ALAW_GAMA_WD_SHIFT			1
-#define ISIF_ALAW_ENABLE			1
-#define ISIF_GAMMAWD_CFA_SHIFT			5
-
-/* HSIZE registers */
-#define ISIF_HSIZE_FLIP_MASK			1
-#define ISIF_HSIZE_FLIP_SHIFT			12
-
-/* MISC registers */
-#define ISIF_DPCM_EN_SHIFT			12
-#define ISIF_DPCM_PREDICTOR_SHIFT		13
-
-/* Black clamp related */
-#define ISIF_BC_MODE_COLOR_SHIFT		4
-#define ISIF_HORZ_BC_MODE_SHIFT			1
-#define ISIF_HORZ_BC_WIN_SEL_SHIFT		5
-#define ISIF_HORZ_BC_PIX_LIMIT_SHIFT		6
-#define ISIF_HORZ_BC_WIN_H_SIZE_SHIFT		8
-#define ISIF_HORZ_BC_WIN_V_SIZE_SHIFT		12
-#define	ISIF_VERT_BC_RST_VAL_SEL_SHIFT		4
-#define ISIF_VERT_BC_LINE_AVE_COEF_SHIFT	8
-
-/* VDFC registers */
-#define ISIF_VDFC_EN_SHIFT			4
-#define ISIF_VDFC_CORR_MOD_SHIFT		5
-#define ISIF_VDFC_CORR_WHOLE_LN_SHIFT		7
-#define ISIF_VDFC_LEVEL_SHFT_SHIFT		8
-#define ISIF_VDFC_POS_MASK			0x1FFF
-#define ISIF_DFCMEMCTL_DFCMARST_SHIFT		2
-
-/* CSC registers */
-#define ISIF_CSC_COEF_INTEG_MASK		7
-#define ISIF_CSC_COEF_DECIMAL_MASK		0x1f
-#define ISIF_CSC_COEF_INTEG_SHIFT		5
-#define ISIF_CSCM_MSB_SHIFT			8
-#define ISIF_DF_CSC_SPH_MASK			0x1FFF
-#define ISIF_DF_CSC_LNH_MASK			0x1FFF
-#define ISIF_DF_CSC_SLV_MASK			0x1FFF
-#define ISIF_DF_CSC_LNV_MASK			0x1FFF
-#define ISIF_DF_NUMLINES			0x7FFF
-#define ISIF_DF_NUMPIX				0x1FFF
-
-/* Offsets for LSC/DFC/Gain */
-#define ISIF_DATA_H_OFFSET_MASK			0x1FFF
-#define ISIF_DATA_V_OFFSET_MASK			0x1FFF
-
-/* Linearization */
-#define ISIF_LIN_CORRSFT_SHIFT			4
-#define ISIF_LIN_SCALE_FACT_INTEG_SHIFT		10
-
-
-/* Pattern registers */
-#define ISIF_PG_EN				(1 << 3)
-#define ISIF_SEL_PG_SRC				(3 << 4)
-#define ISIF_PG_VD_POL_SHIFT			0
-#define ISIF_PG_HD_POL_SHIFT			1
-
-/*random other junk*/
-#define ISIF_SYNCEN_VDHDEN_MASK			(1 << 0)
-#define ISIF_SYNCEN_WEN_MASK			(1 << 1)
-#define ISIF_SYNCEN_WEN_SHIFT			1
-
-#endif
diff --git a/drivers/media/video/davinci/vpbe.c b/drivers/media/video/davinci/vpbe.c
deleted file mode 100644
index c4a82a1a8a9..00000000000
--- a/drivers/media/video/davinci/vpbe.c
+++ /dev/null
@@ -1,886 +0,0 @@
-/*
- * Copyright (C) 2010 Texas Instruments Inc
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation version 2.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/errno.h>
-#include <linux/fs.h>
-#include <linux/string.h>
-#include <linux/wait.h>
-#include <linux/time.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-
-#include <media/v4l2-device.h>
-#include <media/davinci/vpbe_types.h>
-#include <media/davinci/vpbe.h>
-#include <media/davinci/vpss.h>
-#include <media/davinci/vpbe_venc.h>
-
-#define VPBE_DEFAULT_OUTPUT	"Composite"
-#define VPBE_DEFAULT_MODE	"ntsc"
-
-static char *def_output = VPBE_DEFAULT_OUTPUT;
-static char *def_mode = VPBE_DEFAULT_MODE;
-static int debug;
-
-module_param(def_output, charp, S_IRUGO);
-module_param(def_mode, charp, S_IRUGO);
-module_param(debug, int, 0644);
-
-MODULE_PARM_DESC(def_output, "vpbe output name (default:Composite)");
-MODULE_PARM_DESC(def_mode, "vpbe output mode name (default:ntsc");
-MODULE_PARM_DESC(debug, "Debug level 0-1");
-
-MODULE_DESCRIPTION("TI DMXXX VPBE Display controller");
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Texas Instruments");
-
-/**
- * vpbe_current_encoder_info - Get config info for current encoder
- * @vpbe_dev - vpbe device ptr
- *
- * Return ptr to current encoder config info
- */
-static struct encoder_config_info*
-vpbe_current_encoder_info(struct vpbe_device *vpbe_dev)
-{
-	struct vpbe_config *cfg = vpbe_dev->cfg;
-	int index = vpbe_dev->current_sd_index;
-
-	return ((index == 0) ? &cfg->venc :
-				&cfg->ext_encoders[index-1]);
-}
-
-/**
- * vpbe_find_encoder_sd_index - Given a name find encoder sd index
- *
- * @vpbe_config - ptr to vpbe cfg
- * @output_index - index used by application
- *
- * Return sd index of the encoder
- */
-static int vpbe_find_encoder_sd_index(struct vpbe_config *cfg,
-			     int index)
-{
-	char *encoder_name = cfg->outputs[index].subdev_name;
-	int i;
-
-	/* Venc is always first	*/
-	if (!strcmp(encoder_name, cfg->venc.module_name))
-		return 0;
-
-	for (i = 0; i < cfg->num_ext_encoders; i++) {
-		if (!strcmp(encoder_name,
-		     cfg->ext_encoders[i].module_name))
-			return i+1;
-	}
-
-	return -EINVAL;
-}
-
-/**
- * vpbe_g_cropcap - Get crop capabilities of the display
- * @vpbe_dev - vpbe device ptr
- * @cropcap - cropcap is a ptr to struct v4l2_cropcap
- *
- * Update the crop capabilities in crop cap for current
- * mode
- */
-static int vpbe_g_cropcap(struct vpbe_device *vpbe_dev,
-			  struct v4l2_cropcap *cropcap)
-{
-	if (NULL == cropcap)
-		return -EINVAL;
-	cropcap->bounds.left = 0;
-	cropcap->bounds.top = 0;
-	cropcap->bounds.width = vpbe_dev->current_timings.xres;
-	cropcap->bounds.height = vpbe_dev->current_timings.yres;
-	cropcap->defrect = cropcap->bounds;
-
-	return 0;
-}
-
-/**
- * vpbe_enum_outputs - enumerate outputs
- * @vpbe_dev - vpbe device ptr
- * @output - ptr to v4l2_output structure
- *
- * Enumerates the outputs available at the vpbe display
- * returns the status, -EINVAL if end of output list
- */
-static int vpbe_enum_outputs(struct vpbe_device *vpbe_dev,
-			     struct v4l2_output *output)
-{
-	struct vpbe_config *cfg = vpbe_dev->cfg;
-	int temp_index = output->index;
-
-	if (temp_index >= cfg->num_outputs)
-		return -EINVAL;
-
-	*output = cfg->outputs[temp_index].output;
-	output->index = temp_index;
-
-	return 0;
-}
-
-static int vpbe_get_mode_info(struct vpbe_device *vpbe_dev, char *mode,
-			      int output_index)
-{
-	struct vpbe_config *cfg = vpbe_dev->cfg;
-	struct vpbe_enc_mode_info var;
-	int curr_output = output_index;
-	int i;
-
-	if (NULL == mode)
-		return -EINVAL;
-
-	for (i = 0; i < cfg->outputs[curr_output].num_modes; i++) {
-		var = cfg->outputs[curr_output].modes[i];
-		if (!strcmp(mode, var.name)) {
-			vpbe_dev->current_timings = var;
-			return 0;
-		}
-	}
-
-	return -EINVAL;
-}
-
-static int vpbe_get_current_mode_info(struct vpbe_device *vpbe_dev,
-				      struct vpbe_enc_mode_info *mode_info)
-{
-	if (NULL == mode_info)
-		return -EINVAL;
-
-	*mode_info = vpbe_dev->current_timings;
-
-	return 0;
-}
-
-static int vpbe_get_dv_preset_info(struct vpbe_device *vpbe_dev,
-				   unsigned int dv_preset)
-{
-	struct vpbe_config *cfg = vpbe_dev->cfg;
-	struct vpbe_enc_mode_info var;
-	int curr_output = vpbe_dev->current_out_index;
-	int i;
-
-	for (i = 0; i < vpbe_dev->cfg->outputs[curr_output].num_modes; i++) {
-		var = cfg->outputs[curr_output].modes[i];
-		if ((var.timings_type & VPBE_ENC_DV_PRESET) &&
-		  (var.timings.dv_preset == dv_preset)) {
-			vpbe_dev->current_timings = var;
-			return 0;
-		}
-	}
-
-	return -EINVAL;
-}
-
-/* Get std by std id */
-static int vpbe_get_std_info(struct vpbe_device *vpbe_dev,
-			     v4l2_std_id std_id)
-{
-	struct vpbe_config *cfg = vpbe_dev->cfg;
-	struct vpbe_enc_mode_info var;
-	int curr_output = vpbe_dev->current_out_index;
-	int i;
-
-	for (i = 0; i < vpbe_dev->cfg->outputs[curr_output].num_modes; i++) {
-		var = cfg->outputs[curr_output].modes[i];
-		if ((var.timings_type & VPBE_ENC_STD) &&
-		  (var.timings.std_id & std_id)) {
-			vpbe_dev->current_timings = var;
-			return 0;
-		}
-	}
-
-	return -EINVAL;
-}
-
-static int vpbe_get_std_info_by_name(struct vpbe_device *vpbe_dev,
-				char *std_name)
-{
-	struct vpbe_config *cfg = vpbe_dev->cfg;
-	struct vpbe_enc_mode_info var;
-	int curr_output = vpbe_dev->current_out_index;
-	int i;
-
-	for (i = 0; i < vpbe_dev->cfg->outputs[curr_output].num_modes; i++) {
-		var = cfg->outputs[curr_output].modes[i];
-		if (!strcmp(var.name, std_name)) {
-			vpbe_dev->current_timings = var;
-			return 0;
-		}
-	}
-
-	return -EINVAL;
-}
-
-/**
- * vpbe_set_output - Set output
- * @vpbe_dev - vpbe device ptr
- * @index - index of output
- *
- * Set vpbe output to the output specified by the index
- */
-static int vpbe_set_output(struct vpbe_device *vpbe_dev, int index)
-{
-	struct encoder_config_info *curr_enc_info =
-			vpbe_current_encoder_info(vpbe_dev);
-	struct vpbe_config *cfg = vpbe_dev->cfg;
-	struct venc_platform_data *venc_device = vpbe_dev->venc_device;
-	enum v4l2_mbus_pixelcode if_params;
-	int enc_out_index;
-	int sd_index;
-	int ret = 0;
-
-	if (index >= cfg->num_outputs)
-		return -EINVAL;
-
-	mutex_lock(&vpbe_dev->lock);
-
-	sd_index = vpbe_dev->current_sd_index;
-	enc_out_index = cfg->outputs[index].output.index;
-	/*
-	 * Currently we switch the encoder based on output selected
-	 * by the application. If media controller is implemented later
-	 * there is will be an API added to setup_link between venc
-	 * and external encoder. So in that case below comparison always
-	 * match and encoder will not be switched. But if application
-	 * chose not to use media controller, then this provides current
-	 * way of switching encoder at the venc output.
-	 */
-	if (strcmp(curr_enc_info->module_name,
-		   cfg->outputs[index].subdev_name)) {
-		/* Need to switch the encoder at the output */
-		sd_index = vpbe_find_encoder_sd_index(cfg, index);
-		if (sd_index < 0) {
-			ret = -EINVAL;
-			goto out;
-		}
-
-		if_params = cfg->outputs[index].if_params;
-		venc_device->setup_if_config(if_params);
-		if (ret)
-			goto out;
-	}
-
-	/* Set output at the encoder */
-	ret = v4l2_subdev_call(vpbe_dev->encoders[sd_index], video,
-				       s_routing, 0, enc_out_index, 0);
-	if (ret)
-		goto out;
-
-	/*
-	 * It is assumed that venc or extenal encoder will set a default
-	 * mode in the sub device. For external encoder or LCD pannel output,
-	 * we also need to set up the lcd port for the required mode. So setup
-	 * the lcd port for the default mode that is configured in the board
-	 * arch/arm/mach-davinci/board-dm355-evm.setup file for the external
-	 * encoder.
-	 */
-	ret = vpbe_get_mode_info(vpbe_dev,
-				 cfg->outputs[index].default_mode, index);
-	if (!ret) {
-		struct osd_state *osd_device = vpbe_dev->osd_device;
-
-		osd_device->ops.set_left_margin(osd_device,
-			vpbe_dev->current_timings.left_margin);
-		osd_device->ops.set_top_margin(osd_device,
-		vpbe_dev->current_timings.upper_margin);
-		vpbe_dev->current_sd_index = sd_index;
-		vpbe_dev->current_out_index = index;
-	}
-out:
-	mutex_unlock(&vpbe_dev->lock);
-	return ret;
-}
-
-static int vpbe_set_default_output(struct vpbe_device *vpbe_dev)
-{
-	struct vpbe_config *cfg = vpbe_dev->cfg;
-	int ret = 0;
-	int i;
-
-	for (i = 0; i < cfg->num_outputs; i++) {
-		if (!strcmp(def_output,
-			    cfg->outputs[i].output.name)) {
-			ret = vpbe_set_output(vpbe_dev, i);
-			if (!ret)
-				vpbe_dev->current_out_index = i;
-			return ret;
-		}
-	}
-	return ret;
-}
-
-/**
- * vpbe_get_output - Get output
- * @vpbe_dev - vpbe device ptr
- *
- * return current vpbe output to the the index
- */
-static unsigned int vpbe_get_output(struct vpbe_device *vpbe_dev)
-{
-	return vpbe_dev->current_out_index;
-}
-
-/**
- * vpbe_s_dv_preset - Set the given preset timings in the encoder
- *
- * Sets the preset if supported by the current encoder. Return the status.
- * 0 - success & -EINVAL on error
- */
-static int vpbe_s_dv_preset(struct vpbe_device *vpbe_dev,
-		     struct v4l2_dv_preset *dv_preset)
-{
-	struct vpbe_config *cfg = vpbe_dev->cfg;
-	int out_index = vpbe_dev->current_out_index;
-	int sd_index = vpbe_dev->current_sd_index;
-	int ret;
-
-
-	if (!(cfg->outputs[out_index].output.capabilities &
-	    V4L2_OUT_CAP_PRESETS))
-		return -EINVAL;
-
-	ret = vpbe_get_dv_preset_info(vpbe_dev, dv_preset->preset);
-
-	if (ret)
-		return ret;
-
-	mutex_lock(&vpbe_dev->lock);
-
-
-	ret = v4l2_subdev_call(vpbe_dev->encoders[sd_index], video,
-					s_dv_preset, dv_preset);
-	if (!ret && (vpbe_dev->amp != NULL)) {
-		/* Call amplifier subdevice */
-		ret = v4l2_subdev_call(vpbe_dev->amp, video,
-				s_dv_preset, dv_preset);
-	}
-	/* set the lcd controller output for the given mode */
-	if (!ret) {
-		struct osd_state *osd_device = vpbe_dev->osd_device;
-
-		osd_device->ops.set_left_margin(osd_device,
-		vpbe_dev->current_timings.left_margin);
-		osd_device->ops.set_top_margin(osd_device,
-		vpbe_dev->current_timings.upper_margin);
-	}
-	mutex_unlock(&vpbe_dev->lock);
-
-	return ret;
-}
-
-/**
- * vpbe_g_dv_preset - Get the preset in the current encoder
- *
- * Get the preset in the current encoder. Return the status. 0 - success
- * -EINVAL on error
- */
-static int vpbe_g_dv_preset(struct vpbe_device *vpbe_dev,
-		     struct v4l2_dv_preset *dv_preset)
-{
-	if (vpbe_dev->current_timings.timings_type &
-	  VPBE_ENC_DV_PRESET) {
-		dv_preset->preset = vpbe_dev->current_timings.timings.dv_preset;
-		return 0;
-	}
-
-	return -EINVAL;
-}
-
-/**
- * vpbe_enum_dv_presets - Enumerate the dv presets in the current encoder
- *
- * Get the preset in the current encoder. Return the status. 0 - success
- * -EINVAL on error
- */
-static int vpbe_enum_dv_presets(struct vpbe_device *vpbe_dev,
-			 struct v4l2_dv_enum_preset *preset_info)
-{
-	struct vpbe_config *cfg = vpbe_dev->cfg;
-	int out_index = vpbe_dev->current_out_index;
-	struct vpbe_output *output = &cfg->outputs[out_index];
-	int j = 0;
-	int i;
-
-	if (!(output->output.capabilities & V4L2_OUT_CAP_PRESETS))
-		return -EINVAL;
-
-	for (i = 0; i < output->num_modes; i++) {
-		if (output->modes[i].timings_type == VPBE_ENC_DV_PRESET) {
-			if (j == preset_info->index)
-				break;
-			j++;
-		}
-	}
-
-	if (i == output->num_modes)
-		return -EINVAL;
-
-	return v4l_fill_dv_preset_info(output->modes[i].timings.dv_preset,
-					preset_info);
-}
-
-/**
- * vpbe_s_std - Set the given standard in the encoder
- *
- * Sets the standard if supported by the current encoder. Return the status.
- * 0 - success & -EINVAL on error
- */
-static int vpbe_s_std(struct vpbe_device *vpbe_dev, v4l2_std_id *std_id)
-{
-	struct vpbe_config *cfg = vpbe_dev->cfg;
-	int out_index = vpbe_dev->current_out_index;
-	int sd_index = vpbe_dev->current_sd_index;
-	int ret;
-
-	if (!(cfg->outputs[out_index].output.capabilities &
-		V4L2_OUT_CAP_STD))
-		return -EINVAL;
-
-	ret = vpbe_get_std_info(vpbe_dev, *std_id);
-	if (ret)
-		return ret;
-
-	mutex_lock(&vpbe_dev->lock);
-
-	ret = v4l2_subdev_call(vpbe_dev->encoders[sd_index], video,
-			       s_std_output, *std_id);
-	/* set the lcd controller output for the given mode */
-	if (!ret) {
-		struct osd_state *osd_device = vpbe_dev->osd_device;
-
-		osd_device->ops.set_left_margin(osd_device,
-		vpbe_dev->current_timings.left_margin);
-		osd_device->ops.set_top_margin(osd_device,
-		vpbe_dev->current_timings.upper_margin);
-	}
-	mutex_unlock(&vpbe_dev->lock);
-
-	return ret;
-}
-
-/**
- * vpbe_g_std - Get the standard in the current encoder
- *
- * Get the standard in the current encoder. Return the status. 0 - success
- * -EINVAL on error
- */
-static int vpbe_g_std(struct vpbe_device *vpbe_dev, v4l2_std_id *std_id)
-{
-	struct vpbe_enc_mode_info cur_timings = vpbe_dev->current_timings;
-
-	if (cur_timings.timings_type & VPBE_ENC_STD) {
-		*std_id = cur_timings.timings.std_id;
-		return 0;
-	}
-
-	return -EINVAL;
-}
-
-/**
- * vpbe_set_mode - Set mode in the current encoder using mode info
- *
- * Use the mode string to decide what timings to set in the encoder
- * This is typically useful when fbset command is used to change the current
- * timings by specifying a string to indicate the timings.
- */
-static int vpbe_set_mode(struct vpbe_device *vpbe_dev,
-			 struct vpbe_enc_mode_info *mode_info)
-{
-	struct vpbe_enc_mode_info *preset_mode = NULL;
-	struct vpbe_config *cfg = vpbe_dev->cfg;
-	struct v4l2_dv_preset dv_preset;
-	struct osd_state *osd_device;
-	int out_index = vpbe_dev->current_out_index;
-	int ret = 0;
-	int i;
-
-	if ((NULL == mode_info) || (NULL == mode_info->name))
-		return -EINVAL;
-
-	for (i = 0; i < cfg->outputs[out_index].num_modes; i++) {
-		if (!strcmp(mode_info->name,
-		     cfg->outputs[out_index].modes[i].name)) {
-			preset_mode = &cfg->outputs[out_index].modes[i];
-			/*
-			 * it may be one of the 3 timings type. Check and
-			 * invoke right API
-			 */
-			if (preset_mode->timings_type & VPBE_ENC_STD)
-				return vpbe_s_std(vpbe_dev,
-						 &preset_mode->timings.std_id);
-			if (preset_mode->timings_type & VPBE_ENC_DV_PRESET) {
-				dv_preset.preset =
-					preset_mode->timings.dv_preset;
-				return vpbe_s_dv_preset(vpbe_dev, &dv_preset);
-			}
-		}
-	}
-
-	/* Only custom timing should reach here */
-	if (preset_mode == NULL)
-		return -EINVAL;
-
-	mutex_lock(&vpbe_dev->lock);
-
-	osd_device = vpbe_dev->osd_device;
-	vpbe_dev->current_timings = *preset_mode;
-	osd_device->ops.set_left_margin(osd_device,
-		vpbe_dev->current_timings.left_margin);
-	osd_device->ops.set_top_margin(osd_device,
-		vpbe_dev->current_timings.upper_margin);
-
-	mutex_unlock(&vpbe_dev->lock);
-
-	return ret;
-}
-
-static int vpbe_set_default_mode(struct vpbe_device *vpbe_dev)
-{
-	int ret;
-
-	ret = vpbe_get_std_info_by_name(vpbe_dev, def_mode);
-	if (ret)
-		return ret;
-
-	/* set the default mode in the encoder */
-	return vpbe_set_mode(vpbe_dev, &vpbe_dev->current_timings);
-}
-
-static int platform_device_get(struct device *dev, void *data)
-{
-	struct platform_device *pdev = to_platform_device(dev);
-	struct vpbe_device *vpbe_dev = data;
-
-	if (strcmp("vpbe-osd", pdev->name) == 0)
-		vpbe_dev->osd_device = platform_get_drvdata(pdev);
-	if (strcmp("vpbe-venc", pdev->name) == 0)
-		vpbe_dev->venc_device = dev_get_platdata(&pdev->dev);
-
-	return 0;
-}
-
-/**
- * vpbe_initialize() - Initialize the vpbe display controller
- * @vpbe_dev - vpbe device ptr
- *
- * Master frame buffer device drivers calls this to initialize vpbe
- * display controller. This will then registers v4l2 device and the sub
- * devices and sets a current encoder sub device for display. v4l2 display
- * device driver is the master and frame buffer display device driver is
- * the slave. Frame buffer display driver checks the initialized during
- * probe and exit if not initialized. Returns status.
- */
-static int vpbe_initialize(struct device *dev, struct vpbe_device *vpbe_dev)
-{
-	struct encoder_config_info *enc_info;
-	struct amp_config_info *amp_info;
-	struct v4l2_subdev **enc_subdev;
-	struct osd_state *osd_device;
-	struct i2c_adapter *i2c_adap;
-	int output_index;
-	int num_encoders;
-	int ret = 0;
-	int err;
-	int i;
-
-	/*
-	 * v4l2 abd FBDev frame buffer devices will get the vpbe_dev pointer
-	 * from the platform device by iteration of platform drivers and
-	 * matching with device name
-	 */
-	if (NULL == vpbe_dev || NULL == dev) {
-		printk(KERN_ERR "Null device pointers.\n");
-		return -ENODEV;
-	}
-
-	if (vpbe_dev->initialized)
-		return 0;
-
-	mutex_lock(&vpbe_dev->lock);
-
-	if (strcmp(vpbe_dev->cfg->module_name, "dm644x-vpbe-display") != 0) {
-		/* We have dac clock available for platform */
-		vpbe_dev->dac_clk = clk_get(vpbe_dev->pdev, "vpss_dac");
-		if (IS_ERR(vpbe_dev->dac_clk)) {
-			ret =  PTR_ERR(vpbe_dev->dac_clk);
-			goto vpbe_unlock;
-		}
-		if (clk_enable(vpbe_dev->dac_clk)) {
-			ret =  -ENODEV;
-			goto vpbe_unlock;
-		}
-	}
-
-	/* first enable vpss clocks */
-	vpss_enable_clock(VPSS_VPBE_CLOCK, 1);
-
-	/* First register a v4l2 device */
-	ret = v4l2_device_register(dev, &vpbe_dev->v4l2_dev);
-	if (ret) {
-		v4l2_err(dev->driver,
-			"Unable to register v4l2 device.\n");
-		goto vpbe_fail_clock;
-	}
-	v4l2_info(&vpbe_dev->v4l2_dev, "vpbe v4l2 device registered\n");
-
-	err = bus_for_each_dev(&platform_bus_type, NULL, vpbe_dev,
-			       platform_device_get);
-	if (err < 0)
-		return err;
-
-	vpbe_dev->venc = venc_sub_dev_init(&vpbe_dev->v4l2_dev,
-					   vpbe_dev->cfg->venc.module_name);
-	/* register venc sub device */
-	if (vpbe_dev->venc == NULL) {
-		v4l2_err(&vpbe_dev->v4l2_dev,
-			"vpbe unable to init venc sub device\n");
-		ret = -ENODEV;
-		goto vpbe_fail_v4l2_device;
-	}
-	/* initialize osd device */
-	osd_device = vpbe_dev->osd_device;
-
-	if (NULL != osd_device->ops.initialize) {
-		err = osd_device->ops.initialize(osd_device);
-		if (err) {
-			v4l2_err(&vpbe_dev->v4l2_dev,
-				 "unable to initialize the OSD device");
-			err = -ENOMEM;
-			goto vpbe_fail_v4l2_device;
-		}
-	}
-
-	/*
-	 * Register any external encoders that are configured. At index 0 we
-	 * store venc sd index.
-	 */
-	num_encoders = vpbe_dev->cfg->num_ext_encoders + 1;
-	vpbe_dev->encoders = kmalloc(
-				sizeof(struct v4l2_subdev *)*num_encoders,
-				GFP_KERNEL);
-	if (NULL == vpbe_dev->encoders) {
-		v4l2_err(&vpbe_dev->v4l2_dev,
-			"unable to allocate memory for encoders sub devices");
-		ret = -ENOMEM;
-		goto vpbe_fail_v4l2_device;
-	}
-
-	i2c_adap = i2c_get_adapter(vpbe_dev->cfg->i2c_adapter_id);
-	for (i = 0; i < (vpbe_dev->cfg->num_ext_encoders + 1); i++) {
-		if (i == 0) {
-			/* venc is at index 0 */
-			enc_subdev = &vpbe_dev->encoders[i];
-			*enc_subdev = vpbe_dev->venc;
-			continue;
-		}
-		enc_info = &vpbe_dev->cfg->ext_encoders[i];
-		if (enc_info->is_i2c) {
-			enc_subdev = &vpbe_dev->encoders[i];
-			*enc_subdev = v4l2_i2c_new_subdev_board(
-						&vpbe_dev->v4l2_dev, i2c_adap,
-						&enc_info->board_info, NULL);
-			if (*enc_subdev)
-				v4l2_info(&vpbe_dev->v4l2_dev,
-					  "v4l2 sub device %s registered\n",
-					  enc_info->module_name);
-			else {
-				v4l2_err(&vpbe_dev->v4l2_dev, "encoder %s"
-					 " failed to register",
-					 enc_info->module_name);
-				ret = -ENODEV;
-				goto vpbe_fail_sd_register;
-			}
-		} else
-			v4l2_warn(&vpbe_dev->v4l2_dev, "non-i2c encoders"
-				 " currently not supported");
-	}
-	/* Add amplifier subdevice for dm365 */
-	if ((strcmp(vpbe_dev->cfg->module_name, "dm365-vpbe-display") == 0) &&
-			vpbe_dev->cfg->amp != NULL) {
-		amp_info = vpbe_dev->cfg->amp;
-		if (amp_info->is_i2c) {
-			vpbe_dev->amp = v4l2_i2c_new_subdev_board(
-			&vpbe_dev->v4l2_dev, i2c_adap,
-			&amp_info->board_info, NULL);
-			if (!vpbe_dev->amp) {
-				v4l2_err(&vpbe_dev->v4l2_dev,
-					 "amplifier %s failed to register",
-					 amp_info->module_name);
-				ret = -ENODEV;
-				goto vpbe_fail_amp_register;
-			}
-			v4l2_info(&vpbe_dev->v4l2_dev,
-					  "v4l2 sub device %s registered\n",
-					  amp_info->module_name);
-		} else {
-			    vpbe_dev->amp = NULL;
-			    v4l2_warn(&vpbe_dev->v4l2_dev, "non-i2c amplifiers"
-			    " currently not supported");
-		}
-	} else {
-	    vpbe_dev->amp = NULL;
-	}
-
-	/* set the current encoder and output to that of venc by default */
-	vpbe_dev->current_sd_index = 0;
-	vpbe_dev->current_out_index = 0;
-	output_index = 0;
-
-	mutex_unlock(&vpbe_dev->lock);
-
-	printk(KERN_NOTICE "Setting default output to %s\n", def_output);
-	ret = vpbe_set_default_output(vpbe_dev);
-	if (ret) {
-		v4l2_err(&vpbe_dev->v4l2_dev, "Failed to set default output %s",
-			 def_output);
-		return ret;
-	}
-
-	printk(KERN_NOTICE "Setting default mode to %s\n", def_mode);
-	ret = vpbe_set_default_mode(vpbe_dev);
-	if (ret) {
-		v4l2_err(&vpbe_dev->v4l2_dev, "Failed to set default mode %s",
-			 def_mode);
-		return ret;
-	}
-	vpbe_dev->initialized = 1;
-	/* TBD handling of bootargs for default output and mode */
-	return 0;
-
-vpbe_fail_amp_register:
-	kfree(vpbe_dev->amp);
-vpbe_fail_sd_register:
-	kfree(vpbe_dev->encoders);
-vpbe_fail_v4l2_device:
-	v4l2_device_unregister(&vpbe_dev->v4l2_dev);
-vpbe_fail_clock:
-	if (strcmp(vpbe_dev->cfg->module_name, "dm644x-vpbe-display") != 0)
-		clk_put(vpbe_dev->dac_clk);
-vpbe_unlock:
-	mutex_unlock(&vpbe_dev->lock);
-	return ret;
-}
-
-/**
- * vpbe_deinitialize() - de-initialize the vpbe display controller
- * @dev - Master and slave device ptr
- *
- * vpbe_master and slave frame buffer devices calls this to de-initialize
- * the display controller. It is called when master and slave device
- * driver modules are removed and no longer requires the display controller.
- */
-static void vpbe_deinitialize(struct device *dev, struct vpbe_device *vpbe_dev)
-{
-	v4l2_device_unregister(&vpbe_dev->v4l2_dev);
-	if (strcmp(vpbe_dev->cfg->module_name, "dm644x-vpbe-display") != 0)
-		clk_put(vpbe_dev->dac_clk);
-
-	kfree(vpbe_dev->amp);
-	kfree(vpbe_dev->encoders);
-	vpbe_dev->initialized = 0;
-	/* disable vpss clocks */
-	vpss_enable_clock(VPSS_VPBE_CLOCK, 0);
-}
-
-static struct vpbe_device_ops vpbe_dev_ops = {
-	.g_cropcap = vpbe_g_cropcap,
-	.enum_outputs = vpbe_enum_outputs,
-	.set_output = vpbe_set_output,
-	.get_output = vpbe_get_output,
-	.s_dv_preset = vpbe_s_dv_preset,
-	.g_dv_preset = vpbe_g_dv_preset,
-	.enum_dv_presets = vpbe_enum_dv_presets,
-	.s_std = vpbe_s_std,
-	.g_std = vpbe_g_std,
-	.initialize = vpbe_initialize,
-	.deinitialize = vpbe_deinitialize,
-	.get_mode_info = vpbe_get_current_mode_info,
-	.set_mode = vpbe_set_mode,
-};
-
-static __devinit int vpbe_probe(struct platform_device *pdev)
-{
-	struct vpbe_device *vpbe_dev;
-	struct vpbe_config *cfg;
-	int ret = -EINVAL;
-
-	if (pdev->dev.platform_data == NULL) {
-		v4l2_err(pdev->dev.driver, "No platform data\n");
-		return -ENODEV;
-	}
-	cfg = pdev->dev.platform_data;
-
-	if (!cfg->module_name[0] ||
-	    !cfg->osd.module_name[0] ||
-	    !cfg->venc.module_name[0]) {
-		v4l2_err(pdev->dev.driver, "vpbe display module names not"
-			 " defined\n");
-		return ret;
-	}
-
-	vpbe_dev = kzalloc(sizeof(*vpbe_dev), GFP_KERNEL);
-	if (vpbe_dev == NULL) {
-		v4l2_err(pdev->dev.driver, "Unable to allocate memory"
-			 " for vpbe_device\n");
-		return -ENOMEM;
-	}
-	vpbe_dev->cfg = cfg;
-	vpbe_dev->ops = vpbe_dev_ops;
-	vpbe_dev->pdev = &pdev->dev;
-
-	if (cfg->outputs->num_modes > 0)
-		vpbe_dev->current_timings = vpbe_dev->cfg->outputs[0].modes[0];
-	else {
-		kfree(vpbe_dev);
-		return -ENODEV;
-	}
-
-	/* set the driver data in platform device */
-	platform_set_drvdata(pdev, vpbe_dev);
-	mutex_init(&vpbe_dev->lock);
-
-	return 0;
-}
-
-static int vpbe_remove(struct platform_device *device)
-{
-	struct vpbe_device *vpbe_dev = platform_get_drvdata(device);
-
-	kfree(vpbe_dev);
-
-	return 0;
-}
-
-static struct platform_driver vpbe_driver = {
-	.driver	= {
-		.name	= "vpbe_controller",
-		.owner	= THIS_MODULE,
-	},
-	.probe = vpbe_probe,
-	.remove = vpbe_remove,
-};
-
-module_platform_driver(vpbe_driver);
diff --git a/drivers/media/video/davinci/vpbe_display.c b/drivers/media/video/davinci/vpbe_display.c
deleted file mode 100644
index 9a05c817462..00000000000
--- a/drivers/media/video/davinci/vpbe_display.c
+++ /dev/null
@@ -1,1838 +0,0 @@
-/*
- * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/errno.h>
-#include <linux/interrupt.h>
-#include <linux/string.h>
-#include <linux/wait.h>
-#include <linux/time.h>
-#include <linux/platform_device.h>
-#include <linux/irq.h>
-#include <linux/mm.h>
-#include <linux/mutex.h>
-#include <linux/videodev2.h>
-#include <linux/slab.h>
-
-#include <asm/pgtable.h>
-#include <mach/cputype.h>
-
-#include <media/v4l2-dev.h>
-#include <media/v4l2-common.h>
-#include <media/v4l2-ioctl.h>
-#include <media/v4l2-device.h>
-#include <media/davinci/vpbe_display.h>
-#include <media/davinci/vpbe_types.h>
-#include <media/davinci/vpbe.h>
-#include <media/davinci/vpbe_venc.h>
-#include <media/davinci/vpbe_osd.h>
-#include "vpbe_venc_regs.h"
-
-#define VPBE_DISPLAY_DRIVER "vpbe-v4l2"
-
-static int debug;
-
-#define VPBE_DEFAULT_NUM_BUFS 3
-
-module_param(debug, int, 0644);
-
-static int venc_is_second_field(struct vpbe_display *disp_dev)
-{
-	struct vpbe_device *vpbe_dev = disp_dev->vpbe_dev;
-	int ret;
-	int val;
-
-	ret = v4l2_subdev_call(vpbe_dev->venc,
-			       core,
-			       ioctl,
-			       VENC_GET_FLD,
-			       &val);
-	if (ret < 0) {
-		v4l2_err(&vpbe_dev->v4l2_dev,
-			 "Error in getting Field ID 0\n");
-	}
-	return val;
-}
-
-static void vpbe_isr_even_field(struct vpbe_display *disp_obj,
-				struct vpbe_layer *layer)
-{
-	struct timespec timevalue;
-
-	if (layer->cur_frm == layer->next_frm)
-		return;
-	ktime_get_ts(&timevalue);
-	layer->cur_frm->ts.tv_sec = timevalue.tv_sec;
-	layer->cur_frm->ts.tv_usec = timevalue.tv_nsec / NSEC_PER_USEC;
-	layer->cur_frm->state = VIDEOBUF_DONE;
-	wake_up_interruptible(&layer->cur_frm->done);
-	/* Make cur_frm pointing to next_frm */
-	layer->cur_frm = layer->next_frm;
-}
-
-static void vpbe_isr_odd_field(struct vpbe_display *disp_obj,
-				struct vpbe_layer *layer)
-{
-	struct osd_state *osd_device = disp_obj->osd_device;
-	unsigned long addr;
-
-	spin_lock(&disp_obj->dma_queue_lock);
-	if (list_empty(&layer->dma_queue) ||
-		(layer->cur_frm != layer->next_frm)) {
-		spin_unlock(&disp_obj->dma_queue_lock);
-		return;
-	}
-	/*
-	 * one field is displayed configure
-	 * the next frame if it is available
-	 * otherwise hold on current frame
-	 * Get next from the buffer queue
-	 */
-	layer->next_frm = list_entry(
-				layer->dma_queue.next,
-				struct  videobuf_buffer,
-				queue);
-	/* Remove that from the buffer queue */
-	list_del(&layer->next_frm->queue);
-	spin_unlock(&disp_obj->dma_queue_lock);
-	/* Mark state of the frame to active */
-	layer->next_frm->state = VIDEOBUF_ACTIVE;
-	addr = videobuf_to_dma_contig(layer->next_frm);
-	osd_device->ops.start_layer(osd_device,
-			layer->layer_info.id,
-			addr,
-			disp_obj->cbcr_ofst);
-}
-
-/* interrupt service routine */
-static irqreturn_t venc_isr(int irq, void *arg)
-{
-	struct vpbe_display *disp_dev = (struct vpbe_display *)arg;
-	struct vpbe_layer *layer;
-	static unsigned last_event;
-	unsigned event = 0;
-	int fid;
-	int i;
-
-	if ((NULL == arg) || (NULL == disp_dev->dev[0]))
-		return IRQ_HANDLED;
-
-	if (venc_is_second_field(disp_dev))
-		event |= VENC_SECOND_FIELD;
-	else
-		event |= VENC_FIRST_FIELD;
-
-	if (event == (last_event & ~VENC_END_OF_FRAME)) {
-		/*
-		* If the display is non-interlaced, then we need to flag the
-		* end-of-frame event at every interrupt regardless of the
-		* value of the FIDST bit.  We can conclude that the display is
-		* non-interlaced if the value of the FIDST bit is unchanged
-		* from the previous interrupt.
-		*/
-		event |= VENC_END_OF_FRAME;
-	} else if (event == VENC_SECOND_FIELD) {
-		/* end-of-frame for interlaced display */
-		event |= VENC_END_OF_FRAME;
-	}
-	last_event = event;
-
-	for (i = 0; i < VPBE_DISPLAY_MAX_DEVICES; i++) {
-		layer = disp_dev->dev[i];
-		/* If streaming is started in this layer */
-		if (!layer->started)
-			continue;
-
-		if (layer->layer_first_int) {
-			layer->layer_first_int = 0;
-			continue;
-		}
-		/* Check the field format */
-		if ((V4L2_FIELD_NONE == layer->pix_fmt.field) &&
-			(event & VENC_END_OF_FRAME)) {
-			/* Progressive mode */
-
-			vpbe_isr_even_field(disp_dev, layer);
-			vpbe_isr_odd_field(disp_dev, layer);
-		} else {
-		/* Interlaced mode */
-
-			layer->field_id ^= 1;
-			if (event & VENC_FIRST_FIELD)
-				fid = 0;
-			else
-				fid = 1;
-
-			/*
-			* If field id does not match with store
-			* field id
-			*/
-			if (fid != layer->field_id) {
-				/* Make them in sync */
-				layer->field_id = fid;
-				continue;
-			}
-			/*
-			* device field id and local field id are
-			* in sync. If this is even field
-			*/
-			if (0 == fid)
-				vpbe_isr_even_field(disp_dev, layer);
-			else  /* odd field */
-				vpbe_isr_odd_field(disp_dev, layer);
-		}
-	}
-
-	return IRQ_HANDLED;
-}
-
-/*
- * vpbe_buffer_prepare()
- * This is the callback function called from videobuf_qbuf() function
- * the buffer is prepared and user space virtual address is converted into
- * physical address
- */
-static int vpbe_buffer_prepare(struct videobuf_queue *q,
-				  struct videobuf_buffer *vb,
-				  enum v4l2_field field)
-{
-	struct vpbe_fh *fh = q->priv_data;
-	struct vpbe_layer *layer = fh->layer;
-	struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev;
-	unsigned long addr;
-	int ret;
-
-	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev,
-				"vpbe_buffer_prepare\n");
-
-	/* If buffer is not initialized, initialize it */
-	if (VIDEOBUF_NEEDS_INIT == vb->state) {
-		vb->width = layer->pix_fmt.width;
-		vb->height = layer->pix_fmt.height;
-		vb->size = layer->pix_fmt.sizeimage;
-		vb->field = field;
-
-		ret = videobuf_iolock(q, vb, NULL);
-		if (ret < 0) {
-			v4l2_err(&vpbe_dev->v4l2_dev, "Failed to map \
-				user address\n");
-			return -EINVAL;
-		}
-
-		addr = videobuf_to_dma_contig(vb);
-
-		if (q->streaming) {
-			if (!IS_ALIGNED(addr, 8)) {
-				v4l2_err(&vpbe_dev->v4l2_dev,
-					"buffer_prepare:offset is \
-					not aligned to 32 bytes\n");
-				return -EINVAL;
-			}
-		}
-		vb->state = VIDEOBUF_PREPARED;
-	}
-	return 0;
-}
-
-/*
- * vpbe_buffer_setup()
- * This function allocates memory for the buffers
- */
-static int vpbe_buffer_setup(struct videobuf_queue *q,
-				unsigned int *count,
-				unsigned int *size)
-{
-	/* Get the file handle object and layer object */
-	struct vpbe_fh *fh = q->priv_data;
-	struct vpbe_layer *layer = fh->layer;
-	struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev;
-
-	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "vpbe_buffer_setup\n");
-
-	*size = layer->pix_fmt.sizeimage;
-
-	/* Store number of buffers allocated in numbuffer member */
-	if (*count < VPBE_DEFAULT_NUM_BUFS)
-		*count = layer->numbuffers = VPBE_DEFAULT_NUM_BUFS;
-
-	return 0;
-}
-
-/*
- * vpbe_buffer_queue()
- * This function adds the buffer to DMA queue
- */
-static void vpbe_buffer_queue(struct videobuf_queue *q,
-				 struct videobuf_buffer *vb)
-{
-	/* Get the file handle object and layer object */
-	struct vpbe_fh *fh = q->priv_data;
-	struct vpbe_layer *layer = fh->layer;
-	struct vpbe_display *disp = fh->disp_dev;
-	struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev;
-	unsigned long flags;
-
-	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev,
-			"vpbe_buffer_queue\n");
-
-	/* add the buffer to the DMA queue */
-	spin_lock_irqsave(&disp->dma_queue_lock, flags);
-	list_add_tail(&vb->queue, &layer->dma_queue);
-	spin_unlock_irqrestore(&disp->dma_queue_lock, flags);
-	/* Change state of the buffer */
-	vb->state = VIDEOBUF_QUEUED;
-}
-
-/*
- * vpbe_buffer_release()
- * This function is called from the videobuf layer to free memory allocated to
- * the buffers
- */
-static void vpbe_buffer_release(struct videobuf_queue *q,
-				   struct videobuf_buffer *vb)
-{
-	/* Get the file handle object and layer object */
-	struct vpbe_fh *fh = q->priv_data;
-	struct vpbe_layer *layer = fh->layer;
-	struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev;
-
-	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev,
-			"vpbe_buffer_release\n");
-
-	if (V4L2_MEMORY_USERPTR != layer->memory)
-		videobuf_dma_contig_free(q, vb);
-
-	vb->state = VIDEOBUF_NEEDS_INIT;
-}
-
-static struct videobuf_queue_ops video_qops = {
-	.buf_setup = vpbe_buffer_setup,
-	.buf_prepare = vpbe_buffer_prepare,
-	.buf_queue = vpbe_buffer_queue,
-	.buf_release = vpbe_buffer_release,
-};
-
-static
-struct vpbe_layer*
-_vpbe_display_get_other_win_layer(struct vpbe_display *disp_dev,
-			struct vpbe_layer *layer)
-{
-	enum vpbe_display_device_id thiswin, otherwin;
-	thiswin = layer->device_id;
-
-	otherwin = (thiswin == VPBE_DISPLAY_DEVICE_0) ?
-	VPBE_DISPLAY_DEVICE_1 : VPBE_DISPLAY_DEVICE_0;
-	return disp_dev->dev[otherwin];
-}
-
-static int vpbe_set_osd_display_params(struct vpbe_display *disp_dev,
-			struct vpbe_layer *layer)
-{
-	struct osd_layer_config *cfg  = &layer->layer_info.config;
-	struct osd_state *osd_device = disp_dev->osd_device;
-	struct vpbe_device *vpbe_dev = disp_dev->vpbe_dev;
-	unsigned long addr;
-	int ret;
-
-	addr = videobuf_to_dma_contig(layer->cur_frm);
-	/* Set address in the display registers */
-	osd_device->ops.start_layer(osd_device,
-				    layer->layer_info.id,
-				    addr,
-				    disp_dev->cbcr_ofst);
-
-	ret = osd_device->ops.enable_layer(osd_device,
-				layer->layer_info.id, 0);
-	if (ret < 0) {
-		v4l2_err(&vpbe_dev->v4l2_dev,
-			"Error in enabling osd window layer 0\n");
-		return -1;
-	}
-
-	/* Enable the window */
-	layer->layer_info.enable = 1;
-	if (cfg->pixfmt == PIXFMT_NV12) {
-		struct vpbe_layer *otherlayer =
-			_vpbe_display_get_other_win_layer(disp_dev, layer);
-
-		ret = osd_device->ops.enable_layer(osd_device,
-				otherlayer->layer_info.id, 1);
-		if (ret < 0) {
-			v4l2_err(&vpbe_dev->v4l2_dev,
-				"Error in enabling osd window layer 1\n");
-			return -1;
-		}
-		otherlayer->layer_info.enable = 1;
-	}
-	return 0;
-}
-
-static void
-vpbe_disp_calculate_scale_factor(struct vpbe_display *disp_dev,
-			struct vpbe_layer *layer,
-			int expected_xsize, int expected_ysize)
-{
-	struct display_layer_info *layer_info = &layer->layer_info;
-	struct v4l2_pix_format *pixfmt = &layer->pix_fmt;
-	struct osd_layer_config *cfg  = &layer->layer_info.config;
-	struct vpbe_device *vpbe_dev = disp_dev->vpbe_dev;
-	int calculated_xsize;
-	int h_exp = 0;
-	int v_exp = 0;
-	int h_scale;
-	int v_scale;
-
-	v4l2_std_id standard_id = vpbe_dev->current_timings.timings.std_id;
-
-	/*
-	 * Application initially set the image format. Current display
-	 * size is obtained from the vpbe display controller. expected_xsize
-	 * and expected_ysize are set through S_CROP ioctl. Based on this,
-	 * driver will calculate the scale factors for vertical and
-	 * horizontal direction so that the image is displayed scaled
-	 * and expanded. Application uses expansion to display the image
-	 * in a square pixel. Otherwise it is displayed using displays
-	 * pixel aspect ratio.It is expected that application chooses
-	 * the crop coordinates for cropped or scaled display. if crop
-	 * size is less than the image size, it is displayed cropped or
-	 * it is displayed scaled and/or expanded.
-	 *
-	 * to begin with, set the crop window same as expected. Later we
-	 * will override with scaled window size
-	 */
-
-	cfg->xsize = pixfmt->width;
-	cfg->ysize = pixfmt->height;
-	layer_info->h_zoom = ZOOM_X1;	/* no horizontal zoom */
-	layer_info->v_zoom = ZOOM_X1;	/* no horizontal zoom */
-	layer_info->h_exp = H_EXP_OFF;	/* no horizontal zoom */
-	layer_info->v_exp = V_EXP_OFF;	/* no horizontal zoom */
-
-	if (pixfmt->width < expected_xsize) {
-		h_scale = vpbe_dev->current_timings.xres / pixfmt->width;
-		if (h_scale < 2)
-			h_scale = 1;
-		else if (h_scale >= 4)
-			h_scale = 4;
-		else
-			h_scale = 2;
-		cfg->xsize *= h_scale;
-		if (cfg->xsize < expected_xsize) {
-			if ((standard_id & V4L2_STD_525_60) ||
-			(standard_id & V4L2_STD_625_50)) {
-				calculated_xsize = (cfg->xsize *
-					VPBE_DISPLAY_H_EXP_RATIO_N) /
-					VPBE_DISPLAY_H_EXP_RATIO_D;
-				if (calculated_xsize <= expected_xsize) {
-					h_exp = 1;
-					cfg->xsize = calculated_xsize;
-				}
-			}
-		}
-		if (h_scale == 2)
-			layer_info->h_zoom = ZOOM_X2;
-		else if (h_scale == 4)
-			layer_info->h_zoom = ZOOM_X4;
-		if (h_exp)
-			layer_info->h_exp = H_EXP_9_OVER_8;
-	} else {
-		/* no scaling, only cropping. Set display area to crop area */
-		cfg->xsize = expected_xsize;
-	}
-
-	if (pixfmt->height < expected_ysize) {
-		v_scale = expected_ysize / pixfmt->height;
-		if (v_scale < 2)
-			v_scale = 1;
-		else if (v_scale >= 4)
-			v_scale = 4;
-		else
-			v_scale = 2;
-		cfg->ysize *= v_scale;
-		if (cfg->ysize < expected_ysize) {
-			if ((standard_id & V4L2_STD_625_50)) {
-				calculated_xsize = (cfg->ysize *
-					VPBE_DISPLAY_V_EXP_RATIO_N) /
-					VPBE_DISPLAY_V_EXP_RATIO_D;
-				if (calculated_xsize <= expected_ysize) {
-					v_exp = 1;
-					cfg->ysize = calculated_xsize;
-				}
-			}
-		}
-		if (v_scale == 2)
-			layer_info->v_zoom = ZOOM_X2;
-		else if (v_scale == 4)
-			layer_info->v_zoom = ZOOM_X4;
-		if (v_exp)
-			layer_info->h_exp = V_EXP_6_OVER_5;
-	} else {
-		/* no scaling, only cropping. Set display area to crop area */
-		cfg->ysize = expected_ysize;
-	}
-	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev,
-		"crop display xsize = %d, ysize = %d\n",
-		cfg->xsize, cfg->ysize);
-}
-
-static void vpbe_disp_adj_position(struct vpbe_display *disp_dev,
-			struct vpbe_layer *layer,
-			int top, int left)
-{
-	struct osd_layer_config *cfg = &layer->layer_info.config;
-	struct vpbe_device *vpbe_dev = disp_dev->vpbe_dev;
-
-	cfg->xpos = min((unsigned int)left,
-			vpbe_dev->current_timings.xres - cfg->xsize);
-	cfg->ypos = min((unsigned int)top,
-			vpbe_dev->current_timings.yres - cfg->ysize);
-
-	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev,
-		"new xpos = %d, ypos = %d\n",
-		cfg->xpos, cfg->ypos);
-}
-
-static void vpbe_disp_check_window_params(struct vpbe_display *disp_dev,
-			struct v4l2_rect *c)
-{
-	struct vpbe_device *vpbe_dev = disp_dev->vpbe_dev;
-
-	if ((c->width == 0) ||
-	  ((c->width + c->left) > vpbe_dev->current_timings.xres))
-		c->width = vpbe_dev->current_timings.xres - c->left;
-
-	if ((c->height == 0) || ((c->height + c->top) >
-	  vpbe_dev->current_timings.yres))
-		c->height = vpbe_dev->current_timings.yres - c->top;
-
-	/* window height must be even for interlaced display */
-	if (vpbe_dev->current_timings.interlaced)
-		c->height &= (~0x01);
-
-}
-
-/**
- * vpbe_try_format()
- * If user application provides width and height, and have bytesperline set
- * to zero, driver calculates bytesperline and sizeimage based on hardware
- * limits.
- */
-static int vpbe_try_format(struct vpbe_display *disp_dev,
-			struct v4l2_pix_format *pixfmt, int check)
-{
-	struct vpbe_device *vpbe_dev = disp_dev->vpbe_dev;
-	int min_height = 1;
-	int min_width = 32;
-	int max_height;
-	int max_width;
-	int bpp;
-
-	if ((pixfmt->pixelformat != V4L2_PIX_FMT_UYVY) &&
-	    (pixfmt->pixelformat != V4L2_PIX_FMT_NV12))
-		/* choose default as V4L2_PIX_FMT_UYVY */
-		pixfmt->pixelformat = V4L2_PIX_FMT_UYVY;
-
-	/* Check the field format */
-	if ((pixfmt->field != V4L2_FIELD_INTERLACED) &&
-		(pixfmt->field != V4L2_FIELD_NONE)) {
-		if (vpbe_dev->current_timings.interlaced)
-			pixfmt->field = V4L2_FIELD_INTERLACED;
-		else
-			pixfmt->field = V4L2_FIELD_NONE;
-	}
-
-	if (pixfmt->field == V4L2_FIELD_INTERLACED)
-		min_height = 2;
-
-	if (pixfmt->pixelformat == V4L2_PIX_FMT_NV12)
-		bpp = 1;
-	else
-		bpp = 2;
-
-	max_width = vpbe_dev->current_timings.xres;
-	max_height = vpbe_dev->current_timings.yres;
-
-	min_width /= bpp;
-
-	if (!pixfmt->width || (pixfmt->width < min_width) ||
-		(pixfmt->width > max_width)) {
-		pixfmt->width = vpbe_dev->current_timings.xres;
-	}
-
-	if (!pixfmt->height || (pixfmt->height  < min_height) ||
-		(pixfmt->height  > max_height)) {
-		pixfmt->height = vpbe_dev->current_timings.yres;
-	}
-
-	if (pixfmt->bytesperline < (pixfmt->width * bpp))
-		pixfmt->bytesperline = pixfmt->width * bpp;
-
-	/* Make the bytesperline 32 byte aligned */
-	pixfmt->bytesperline = ((pixfmt->width * bpp + 31) & ~31);
-
-	if (pixfmt->pixelformat == V4L2_PIX_FMT_NV12)
-		pixfmt->sizeimage = pixfmt->bytesperline * pixfmt->height +
-				(pixfmt->bytesperline * pixfmt->height >> 1);
-	else
-		pixfmt->sizeimage = pixfmt->bytesperline * pixfmt->height;
-
-	return 0;
-}
-
-static int vpbe_display_g_priority(struct file *file, void *priv,
-				enum v4l2_priority *p)
-{
-	struct vpbe_fh *fh = file->private_data;
-	struct vpbe_layer *layer = fh->layer;
-
-	*p = v4l2_prio_max(&layer->prio);
-
-	return 0;
-}
-
-static int vpbe_display_s_priority(struct file *file, void *priv,
-				enum v4l2_priority p)
-{
-	struct vpbe_fh *fh = file->private_data;
-	struct vpbe_layer *layer = fh->layer;
-	int ret;
-
-	ret = v4l2_prio_change(&layer->prio, &fh->prio, p);
-
-	return ret;
-}
-
-static int vpbe_display_querycap(struct file *file, void  *priv,
-			       struct v4l2_capability *cap)
-{
-	struct vpbe_fh *fh = file->private_data;
-	struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev;
-
-	cap->version = VPBE_DISPLAY_VERSION_CODE;
-	cap->capabilities = V4L2_CAP_VIDEO_OUTPUT | V4L2_CAP_STREAMING;
-	strlcpy(cap->driver, VPBE_DISPLAY_DRIVER, sizeof(cap->driver));
-	strlcpy(cap->bus_info, "platform", sizeof(cap->bus_info));
-	strlcpy(cap->card, vpbe_dev->cfg->module_name, sizeof(cap->card));
-
-	return 0;
-}
-
-static int vpbe_display_s_crop(struct file *file, void *priv,
-			     struct v4l2_crop *crop)
-{
-	struct vpbe_fh *fh = file->private_data;
-	struct vpbe_layer *layer = fh->layer;
-	struct vpbe_display *disp_dev = fh->disp_dev;
-	struct vpbe_device *vpbe_dev = disp_dev->vpbe_dev;
-	struct osd_layer_config *cfg = &layer->layer_info.config;
-	struct osd_state *osd_device = disp_dev->osd_device;
-	struct v4l2_rect *rect = &crop->c;
-	int ret;
-
-	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev,
-		"VIDIOC_S_CROP, layer id = %d\n", layer->device_id);
-
-	if (crop->type != V4L2_BUF_TYPE_VIDEO_OUTPUT) {
-		v4l2_err(&vpbe_dev->v4l2_dev, "Invalid buf type\n");
-		return -EINVAL;
-	}
-
-	if (rect->top < 0)
-		rect->top = 0;
-	if (rect->left < 0)
-		rect->left = 0;
-
-	vpbe_disp_check_window_params(disp_dev, rect);
-
-	osd_device->ops.get_layer_config(osd_device,
-			layer->layer_info.id, cfg);
-
-	vpbe_disp_calculate_scale_factor(disp_dev, layer,
-					rect->width,
-					rect->height);
-	vpbe_disp_adj_position(disp_dev, layer, rect->top,
-					rect->left);
-	ret = osd_device->ops.set_layer_config(osd_device,
-				layer->layer_info.id, cfg);
-	if (ret < 0) {
-		v4l2_err(&vpbe_dev->v4l2_dev,
-			"Error in set layer config:\n");
-		return -EINVAL;
-	}
-
-	/* apply zooming and h or v expansion */
-	osd_device->ops.set_zoom(osd_device,
-			layer->layer_info.id,
-			layer->layer_info.h_zoom,
-			layer->layer_info.v_zoom);
-	ret = osd_device->ops.set_vid_expansion(osd_device,
-			layer->layer_info.h_exp,
-			layer->layer_info.v_exp);
-	if (ret < 0) {
-		v4l2_err(&vpbe_dev->v4l2_dev,
-		"Error in set vid expansion:\n");
-		return -EINVAL;
-	}
-
-	if ((layer->layer_info.h_zoom != ZOOM_X1) ||
-		(layer->layer_info.v_zoom != ZOOM_X1) ||
-		(layer->layer_info.h_exp != H_EXP_OFF) ||
-		(layer->layer_info.v_exp != V_EXP_OFF))
-		/* Enable expansion filter */
-		osd_device->ops.set_interpolation_filter(osd_device, 1);
-	else
-		osd_device->ops.set_interpolation_filter(osd_device, 0);
-
-	return 0;
-}
-
-static int vpbe_display_g_crop(struct file *file, void *priv,
-			     struct v4l2_crop *crop)
-{
-	struct vpbe_fh *fh = file->private_data;
-	struct vpbe_layer *layer = fh->layer;
-	struct osd_layer_config *cfg = &layer->layer_info.config;
-	struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev;
-	struct osd_state *osd_device = fh->disp_dev->osd_device;
-	struct v4l2_rect *rect = &crop->c;
-	int ret;
-
-	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev,
-			"VIDIOC_G_CROP, layer id = %d\n",
-			layer->device_id);
-
-	if (crop->type != V4L2_BUF_TYPE_VIDEO_OUTPUT) {
-		v4l2_err(&vpbe_dev->v4l2_dev, "Invalid buf type\n");
-		ret = -EINVAL;
-	}
-	osd_device->ops.get_layer_config(osd_device,
-				layer->layer_info.id, cfg);
-	rect->top = cfg->ypos;
-	rect->left = cfg->xpos;
-	rect->width = cfg->xsize;
-	rect->height = cfg->ysize;
-
-	return 0;
-}
-
-static int vpbe_display_cropcap(struct file *file, void *priv,
-			      struct v4l2_cropcap *cropcap)
-{
-	struct vpbe_fh *fh = file->private_data;
-	struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev;
-
-	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "VIDIOC_CROPCAP ioctl\n");
-
-	cropcap->type = V4L2_BUF_TYPE_VIDEO_OUTPUT;
-	cropcap->bounds.left = 0;
-	cropcap->bounds.top = 0;
-	cropcap->bounds.width = vpbe_dev->current_timings.xres;
-	cropcap->bounds.height = vpbe_dev->current_timings.yres;
-	cropcap->pixelaspect = vpbe_dev->current_timings.aspect;
-	cropcap->defrect = cropcap->bounds;
-	return 0;
-}
-
-static int vpbe_display_g_fmt(struct file *file, void *priv,
-				struct v4l2_format *fmt)
-{
-	struct vpbe_fh *fh = file->private_data;
-	struct vpbe_layer *layer = fh->layer;
-	struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev;
-
-	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev,
-			"VIDIOC_G_FMT, layer id = %d\n",
-			layer->device_id);
-
-	/* If buffer type is video output */
-	if (V4L2_BUF_TYPE_VIDEO_OUTPUT != fmt->type) {
-		v4l2_err(&vpbe_dev->v4l2_dev, "invalid type\n");
-		return -EINVAL;
-	}
-	/* Fill in the information about format */
-	fmt->fmt.pix = layer->pix_fmt;
-
-	return 0;
-}
-
-static int vpbe_display_enum_fmt(struct file *file, void  *priv,
-				   struct v4l2_fmtdesc *fmt)
-{
-	struct vpbe_fh *fh = file->private_data;
-	struct vpbe_layer *layer = fh->layer;
-	struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev;
-	unsigned int index = 0;
-
-	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev,
-				"VIDIOC_ENUM_FMT, layer id = %d\n",
-				layer->device_id);
-	if (fmt->index > 1) {
-		v4l2_err(&vpbe_dev->v4l2_dev, "Invalid format index\n");
-		return -EINVAL;
-	}
-
-	/* Fill in the information about format */
-	index = fmt->index;
-	memset(fmt, 0, sizeof(*fmt));
-	fmt->index = index;
-	fmt->type = V4L2_BUF_TYPE_VIDEO_OUTPUT;
-	if (index == 0) {
-		strcpy(fmt->description, "YUV 4:2:2 - UYVY");
-		fmt->pixelformat = V4L2_PIX_FMT_UYVY;
-	} else {
-		strcpy(fmt->description, "Y/CbCr 4:2:0");
-		fmt->pixelformat = V4L2_PIX_FMT_NV12;
-	}
-
-	return 0;
-}
-
-static int vpbe_display_s_fmt(struct file *file, void *priv,
-				struct v4l2_format *fmt)
-{
-	struct vpbe_fh *fh = file->private_data;
-	struct vpbe_layer *layer = fh->layer;
-	struct vpbe_display *disp_dev = fh->disp_dev;
-	struct vpbe_device *vpbe_dev = disp_dev->vpbe_dev;
-	struct osd_layer_config *cfg  = &layer->layer_info.config;
-	struct v4l2_pix_format *pixfmt = &fmt->fmt.pix;
-	struct osd_state *osd_device = disp_dev->osd_device;
-	int ret;
-
-	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev,
-			"VIDIOC_S_FMT, layer id = %d\n",
-			layer->device_id);
-
-	/* If streaming is started, return error */
-	if (layer->started) {
-		v4l2_err(&vpbe_dev->v4l2_dev, "Streaming is started\n");
-		return -EBUSY;
-	}
-	if (V4L2_BUF_TYPE_VIDEO_OUTPUT != fmt->type) {
-		v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "invalid type\n");
-		return -EINVAL;
-	}
-	/* Check for valid pixel format */
-	ret = vpbe_try_format(disp_dev, pixfmt, 1);
-	if (ret)
-		return ret;
-
-	/* YUV420 is requested, check availability of the
-	other video window */
-
-	layer->pix_fmt = *pixfmt;
-
-	/* Get osd layer config */
-	osd_device->ops.get_layer_config(osd_device,
-			layer->layer_info.id, cfg);
-	/* Store the pixel format in the layer object */
-	cfg->xsize = pixfmt->width;
-	cfg->ysize = pixfmt->height;
-	cfg->line_length = pixfmt->bytesperline;
-	cfg->ypos = 0;
-	cfg->xpos = 0;
-	cfg->interlaced = vpbe_dev->current_timings.interlaced;
-
-	if (V4L2_PIX_FMT_UYVY == pixfmt->pixelformat)
-		cfg->pixfmt = PIXFMT_YCbCrI;
-
-	/* Change of the default pixel format for both video windows */
-	if (V4L2_PIX_FMT_NV12 == pixfmt->pixelformat) {
-		struct vpbe_layer *otherlayer;
-		cfg->pixfmt = PIXFMT_NV12;
-		otherlayer = _vpbe_display_get_other_win_layer(disp_dev,
-								layer);
-		otherlayer->layer_info.config.pixfmt = PIXFMT_NV12;
-	}
-
-	/* Set the layer config in the osd window */
-	ret = osd_device->ops.set_layer_config(osd_device,
-				layer->layer_info.id, cfg);
-	if (ret < 0) {
-		v4l2_err(&vpbe_dev->v4l2_dev,
-				"Error in S_FMT params:\n");
-		return -EINVAL;
-	}
-
-	/* Readback and fill the local copy of current pix format */
-	osd_device->ops.get_layer_config(osd_device,
-			layer->layer_info.id, cfg);
-
-	return 0;
-}
-
-static int vpbe_display_try_fmt(struct file *file, void *priv,
-				  struct v4l2_format *fmt)
-{
-	struct vpbe_fh *fh = file->private_data;
-	struct vpbe_display *disp_dev = fh->disp_dev;
-	struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev;
-	struct v4l2_pix_format *pixfmt = &fmt->fmt.pix;
-
-	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "VIDIOC_TRY_FMT\n");
-
-	if (V4L2_BUF_TYPE_VIDEO_OUTPUT != fmt->type) {
-		v4l2_err(&vpbe_dev->v4l2_dev, "invalid type\n");
-		return -EINVAL;
-	}
-
-	/* Check for valid field format */
-	return  vpbe_try_format(disp_dev, pixfmt, 0);
-
-}
-
-/**
- * vpbe_display_s_std - Set the given standard in the encoder
- *
- * Sets the standard if supported by the current encoder. Return the status.
- * 0 - success & -EINVAL on error
- */
-static int vpbe_display_s_std(struct file *file, void *priv,
-				v4l2_std_id *std_id)
-{
-	struct vpbe_fh *fh = priv;
-	struct vpbe_layer *layer = fh->layer;
-	struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev;
-	int ret;
-
-	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "VIDIOC_S_STD\n");
-
-	/* If streaming is started, return error */
-	if (layer->started) {
-		v4l2_err(&vpbe_dev->v4l2_dev, "Streaming is started\n");
-		return -EBUSY;
-	}
-	if (NULL != vpbe_dev->ops.s_std) {
-		ret = vpbe_dev->ops.s_std(vpbe_dev, std_id);
-		if (ret) {
-			v4l2_err(&vpbe_dev->v4l2_dev,
-			"Failed to set standard for sub devices\n");
-			return -EINVAL;
-		}
-	} else {
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-/**
- * vpbe_display_g_std - Get the standard in the current encoder
- *
- * Get the standard in the current encoder. Return the status. 0 - success
- * -EINVAL on error
- */
-static int vpbe_display_g_std(struct file *file, void *priv,
-				v4l2_std_id *std_id)
-{
-	struct vpbe_fh *fh = priv;
-	struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev;
-
-	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev,	"VIDIOC_G_STD\n");
-
-	/* Get the standard from the current encoder */
-	if (vpbe_dev->current_timings.timings_type & VPBE_ENC_STD) {
-		*std_id = vpbe_dev->current_timings.timings.std_id;
-		return 0;
-	}
-
-	return -EINVAL;
-}
-
-/**
- * vpbe_display_enum_output - enumerate outputs
- *
- * Enumerates the outputs available at the vpbe display
- * returns the status, -EINVAL if end of output list
- */
-static int vpbe_display_enum_output(struct file *file, void *priv,
-				    struct v4l2_output *output)
-{
-	struct vpbe_fh *fh = priv;
-	struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev;
-	int ret;
-
-	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev,	"VIDIOC_ENUM_OUTPUT\n");
-
-	/* Enumerate outputs */
-
-	if (NULL == vpbe_dev->ops.enum_outputs)
-		return -EINVAL;
-
-	ret = vpbe_dev->ops.enum_outputs(vpbe_dev, output);
-	if (ret) {
-		v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev,
-			"Failed to enumerate outputs\n");
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-/**
- * vpbe_display_s_output - Set output to
- * the output specified by the index
- */
-static int vpbe_display_s_output(struct file *file, void *priv,
-				unsigned int i)
-{
-	struct vpbe_fh *fh = priv;
-	struct vpbe_layer *layer = fh->layer;
-	struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev;
-	int ret;
-
-	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev,	"VIDIOC_S_OUTPUT\n");
-	/* If streaming is started, return error */
-	if (layer->started) {
-		v4l2_err(&vpbe_dev->v4l2_dev, "Streaming is started\n");
-		return -EBUSY;
-	}
-	if (NULL == vpbe_dev->ops.set_output)
-		return -EINVAL;
-
-	ret = vpbe_dev->ops.set_output(vpbe_dev, i);
-	if (ret) {
-		v4l2_err(&vpbe_dev->v4l2_dev,
-			"Failed to set output for sub devices\n");
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-/**
- * vpbe_display_g_output - Get output from subdevice
- * for a given by the index
- */
-static int vpbe_display_g_output(struct file *file, void *priv,
-				unsigned int *i)
-{
-	struct vpbe_fh *fh = priv;
-	struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev;
-
-	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "VIDIOC_G_OUTPUT\n");
-	/* Get the standard from the current encoder */
-	*i = vpbe_dev->current_out_index;
-
-	return 0;
-}
-
-/**
- * vpbe_display_enum_dv_presets - Enumerate the dv presets
- *
- * enum the preset in the current encoder. Return the status. 0 - success
- * -EINVAL on error
- */
-static int
-vpbe_display_enum_dv_presets(struct file *file, void *priv,
-			struct v4l2_dv_enum_preset *preset)
-{
-	struct vpbe_fh *fh = priv;
-	struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev;
-	int ret;
-
-	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "VIDIOC_ENUM_DV_PRESETS\n");
-
-	/* Enumerate outputs */
-	if (NULL == vpbe_dev->ops.enum_dv_presets)
-		return -EINVAL;
-
-	ret = vpbe_dev->ops.enum_dv_presets(vpbe_dev, preset);
-	if (ret) {
-		v4l2_err(&vpbe_dev->v4l2_dev,
-			"Failed to enumerate dv presets info\n");
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-/**
- * vpbe_display_s_dv_preset - Set the dv presets
- *
- * Set the preset in the current encoder. Return the status. 0 - success
- * -EINVAL on error
- */
-static int
-vpbe_display_s_dv_preset(struct file *file, void *priv,
-				struct v4l2_dv_preset *preset)
-{
-	struct vpbe_fh *fh = priv;
-	struct vpbe_layer *layer = fh->layer;
-	struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev;
-	int ret;
-
-	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "VIDIOC_S_DV_PRESETS\n");
-
-
-	/* If streaming is started, return error */
-	if (layer->started) {
-		v4l2_err(&vpbe_dev->v4l2_dev, "Streaming is started\n");
-		return -EBUSY;
-	}
-
-	/* Set the given standard in the encoder */
-	if (!vpbe_dev->ops.s_dv_preset)
-		return -EINVAL;
-
-	ret = vpbe_dev->ops.s_dv_preset(vpbe_dev, preset);
-	if (ret) {
-		v4l2_err(&vpbe_dev->v4l2_dev,
-			"Failed to set the dv presets info\n");
-		return -EINVAL;
-	}
-	/* set the current norm to zero to be consistent. If STD is used
-	 * v4l2 layer will set the norm properly on successful s_std call
-	 */
-	layer->video_dev.current_norm = 0;
-
-	return 0;
-}
-
-/**
- * vpbe_display_g_dv_preset - Set the dv presets
- *
- * Get the preset in the current encoder. Return the status. 0 - success
- * -EINVAL on error
- */
-static int
-vpbe_display_g_dv_preset(struct file *file, void *priv,
-				struct v4l2_dv_preset *dv_preset)
-{
-	struct vpbe_fh *fh = priv;
-	struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev;
-
-	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "VIDIOC_G_DV_PRESETS\n");
-
-	/* Get the given standard in the encoder */
-
-	if (vpbe_dev->current_timings.timings_type &
-				VPBE_ENC_DV_PRESET) {
-		dv_preset->preset =
-			vpbe_dev->current_timings.timings.dv_preset;
-	} else {
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static int vpbe_display_streamoff(struct file *file, void *priv,
-				enum v4l2_buf_type buf_type)
-{
-	struct vpbe_fh *fh = file->private_data;
-	struct vpbe_layer *layer = fh->layer;
-	struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev;
-	struct osd_state *osd_device = fh->disp_dev->osd_device;
-	int ret;
-
-	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev,
-			"VIDIOC_STREAMOFF,layer id = %d\n",
-			layer->device_id);
-
-	if (V4L2_BUF_TYPE_VIDEO_OUTPUT != buf_type) {
-		v4l2_err(&vpbe_dev->v4l2_dev, "Invalid buffer type\n");
-		return -EINVAL;
-	}
-
-	/* If io is allowed for this file handle, return error */
-	if (!fh->io_allowed) {
-		v4l2_err(&vpbe_dev->v4l2_dev, "No io_allowed\n");
-		return -EACCES;
-	}
-
-	/* If streaming is not started, return error */
-	if (!layer->started) {
-		v4l2_err(&vpbe_dev->v4l2_dev, "streaming not started in layer"
-			" id = %d\n", layer->device_id);
-		return -EINVAL;
-	}
-
-	osd_device->ops.disable_layer(osd_device,
-			layer->layer_info.id);
-	layer->started = 0;
-	ret = videobuf_streamoff(&layer->buffer_queue);
-
-	return ret;
-}
-
-static int vpbe_display_streamon(struct file *file, void *priv,
-			 enum v4l2_buf_type buf_type)
-{
-	struct vpbe_fh *fh = file->private_data;
-	struct vpbe_layer *layer = fh->layer;
-	struct vpbe_display *disp_dev = fh->disp_dev;
-	struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev;
-	struct osd_state *osd_device = disp_dev->osd_device;
-	int ret;
-
-	osd_device->ops.disable_layer(osd_device,
-			layer->layer_info.id);
-
-	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "VIDIOC_STREAMON, layerid=%d\n",
-						layer->device_id);
-
-	if (V4L2_BUF_TYPE_VIDEO_OUTPUT != buf_type) {
-		v4l2_err(&vpbe_dev->v4l2_dev, "Invalid buffer type\n");
-		return -EINVAL;
-	}
-
-	/* If file handle is not allowed IO, return error */
-	if (!fh->io_allowed) {
-		v4l2_err(&vpbe_dev->v4l2_dev, "No io_allowed\n");
-		return -EACCES;
-	}
-	/* If Streaming is already started, return error */
-	if (layer->started) {
-		v4l2_err(&vpbe_dev->v4l2_dev, "layer is already streaming\n");
-		return -EBUSY;
-	}
-
-	/*
-	 * Call videobuf_streamon to start streaming
-	 * in videobuf
-	 */
-	ret = videobuf_streamon(&layer->buffer_queue);
-	if (ret) {
-		v4l2_err(&vpbe_dev->v4l2_dev,
-		"error in videobuf_streamon\n");
-		return ret;
-	}
-	/* If buffer queue is empty, return error */
-	if (list_empty(&layer->dma_queue)) {
-		v4l2_err(&vpbe_dev->v4l2_dev, "buffer queue is empty\n");
-		goto streamoff;
-	}
-	/* Get the next frame from the buffer queue */
-	layer->next_frm = layer->cur_frm = list_entry(layer->dma_queue.next,
-				struct videobuf_buffer, queue);
-	/* Remove buffer from the buffer queue */
-	list_del(&layer->cur_frm->queue);
-	/* Mark state of the current frame to active */
-	layer->cur_frm->state = VIDEOBUF_ACTIVE;
-	/* Initialize field_id and started member */
-	layer->field_id = 0;
-
-	/* Set parameters in OSD and VENC */
-	ret = vpbe_set_osd_display_params(disp_dev, layer);
-	if (ret < 0)
-		goto streamoff;
-
-	/*
-	 * if request format is yuv420 semiplanar, need to
-	 * enable both video windows
-	 */
-	layer->started = 1;
-
-	layer->layer_first_int = 1;
-
-	return ret;
-streamoff:
-	ret = videobuf_streamoff(&layer->buffer_queue);
-	return ret;
-}
-
-static int vpbe_display_dqbuf(struct file *file, void *priv,
-		      struct v4l2_buffer *buf)
-{
-	struct vpbe_fh *fh = file->private_data;
-	struct vpbe_layer *layer = fh->layer;
-	struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev;
-	int ret;
-
-	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev,
-		"VIDIOC_DQBUF, layer id = %d\n",
-		layer->device_id);
-
-	if (V4L2_BUF_TYPE_VIDEO_OUTPUT != buf->type) {
-		v4l2_err(&vpbe_dev->v4l2_dev, "Invalid buffer type\n");
-		return -EINVAL;
-	}
-	/* If this file handle is not allowed to do IO, return error */
-	if (!fh->io_allowed) {
-		v4l2_err(&vpbe_dev->v4l2_dev, "No io_allowed\n");
-		return -EACCES;
-	}
-	if (file->f_flags & O_NONBLOCK)
-		/* Call videobuf_dqbuf for non blocking mode */
-		ret = videobuf_dqbuf(&layer->buffer_queue, buf, 1);
-	else
-		/* Call videobuf_dqbuf for blocking mode */
-		ret = videobuf_dqbuf(&layer->buffer_queue, buf, 0);
-
-	return ret;
-}
-
-static int vpbe_display_qbuf(struct file *file, void *priv,
-		     struct v4l2_buffer *p)
-{
-	struct vpbe_fh *fh = file->private_data;
-	struct vpbe_layer *layer = fh->layer;
-	struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev;
-
-	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev,
-		"VIDIOC_QBUF, layer id = %d\n",
-		layer->device_id);
-
-	if (V4L2_BUF_TYPE_VIDEO_OUTPUT != p->type) {
-		v4l2_err(&vpbe_dev->v4l2_dev, "Invalid buffer type\n");
-		return -EINVAL;
-	}
-
-	/* If this file handle is not allowed to do IO, return error */
-	if (!fh->io_allowed) {
-		v4l2_err(&vpbe_dev->v4l2_dev, "No io_allowed\n");
-		return -EACCES;
-	}
-
-	return videobuf_qbuf(&layer->buffer_queue, p);
-}
-
-static int vpbe_display_querybuf(struct file *file, void *priv,
-			 struct v4l2_buffer *buf)
-{
-	struct vpbe_fh *fh = file->private_data;
-	struct vpbe_layer *layer = fh->layer;
-	struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev;
-	int ret;
-
-	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev,
-		"VIDIOC_QUERYBUF, layer id = %d\n",
-		layer->device_id);
-
-	if (V4L2_BUF_TYPE_VIDEO_OUTPUT != buf->type) {
-		v4l2_err(&vpbe_dev->v4l2_dev, "Invalid buffer type\n");
-		return -EINVAL;
-	}
-
-	/* Call videobuf_querybuf to get information */
-	ret = videobuf_querybuf(&layer->buffer_queue, buf);
-
-	return ret;
-}
-
-static int vpbe_display_reqbufs(struct file *file, void *priv,
-			struct v4l2_requestbuffers *req_buf)
-{
-	struct vpbe_fh *fh = file->private_data;
-	struct vpbe_layer *layer = fh->layer;
-	struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev;
-	int ret;
-
-	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "vpbe_display_reqbufs\n");
-
-	if (V4L2_BUF_TYPE_VIDEO_OUTPUT != req_buf->type) {
-		v4l2_err(&vpbe_dev->v4l2_dev, "Invalid buffer type\n");
-		return -EINVAL;
-	}
-
-	/* If io users of the layer is not zero, return error */
-	if (0 != layer->io_usrs) {
-		v4l2_err(&vpbe_dev->v4l2_dev, "not IO user\n");
-		return -EBUSY;
-	}
-	/* Initialize videobuf queue as per the buffer type */
-	videobuf_queue_dma_contig_init(&layer->buffer_queue,
-				&video_qops,
-				vpbe_dev->pdev,
-				&layer->irqlock,
-				V4L2_BUF_TYPE_VIDEO_OUTPUT,
-				layer->pix_fmt.field,
-				sizeof(struct videobuf_buffer),
-				fh, NULL);
-
-	/* Set io allowed member of file handle to TRUE */
-	fh->io_allowed = 1;
-	/* Increment io usrs member of layer object to 1 */
-	layer->io_usrs = 1;
-	/* Store type of memory requested in layer object */
-	layer->memory = req_buf->memory;
-	/* Initialize buffer queue */
-	INIT_LIST_HEAD(&layer->dma_queue);
-	/* Allocate buffers */
-	ret = videobuf_reqbufs(&layer->buffer_queue, req_buf);
-
-	return ret;
-}
-
-/*
- * vpbe_display_mmap()
- * It is used to map kernel space buffers into user spaces
- */
-static int vpbe_display_mmap(struct file *filep, struct vm_area_struct *vma)
-{
-	/* Get the layer object and file handle object */
-	struct vpbe_fh *fh = filep->private_data;
-	struct vpbe_layer *layer = fh->layer;
-	struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev;
-	int ret;
-
-	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "vpbe_display_mmap\n");
-
-	if (mutex_lock_interruptible(&layer->opslock))
-		return -ERESTARTSYS;
-	ret = videobuf_mmap_mapper(&layer->buffer_queue, vma);
-	mutex_unlock(&layer->opslock);
-	return ret;
-}
-
-/* vpbe_display_poll(): It is used for select/poll system call
- */
-static unsigned int vpbe_display_poll(struct file *filep, poll_table *wait)
-{
-	struct vpbe_fh *fh = filep->private_data;
-	struct vpbe_layer *layer = fh->layer;
-	struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev;
-	unsigned int err = 0;
-
-	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "vpbe_display_poll\n");
-	if (layer->started) {
-		mutex_lock(&layer->opslock);
-		err = videobuf_poll_stream(filep, &layer->buffer_queue, wait);
-		mutex_unlock(&layer->opslock);
-	}
-	return err;
-}
-
-/*
- * vpbe_display_open()
- * It creates object of file handle structure and stores it in private_data
- * member of filepointer
- */
-static int vpbe_display_open(struct file *file)
-{
-	struct vpbe_fh *fh = NULL;
-	struct vpbe_layer *layer = video_drvdata(file);
-	struct vpbe_display *disp_dev = layer->disp_dev;
-	struct vpbe_device *vpbe_dev = disp_dev->vpbe_dev;
-	struct osd_state *osd_device = disp_dev->osd_device;
-	int err;
-
-	/* Allocate memory for the file handle object */
-	fh = kmalloc(sizeof(struct vpbe_fh), GFP_KERNEL);
-	if (fh == NULL) {
-		v4l2_err(&vpbe_dev->v4l2_dev,
-			"unable to allocate memory for file handle object\n");
-		return -ENOMEM;
-	}
-	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev,
-			"vpbe display open plane = %d\n",
-			layer->device_id);
-
-	/* store pointer to fh in private_data member of filep */
-	file->private_data = fh;
-	fh->layer = layer;
-	fh->disp_dev = disp_dev;
-
-	if (!layer->usrs) {
-		if (mutex_lock_interruptible(&layer->opslock))
-			return -ERESTARTSYS;
-		/* First claim the layer for this device */
-		err = osd_device->ops.request_layer(osd_device,
-						layer->layer_info.id);
-		mutex_unlock(&layer->opslock);
-		if (err < 0) {
-			/* Couldn't get layer */
-			v4l2_err(&vpbe_dev->v4l2_dev,
-				"Display Manager failed to allocate layer\n");
-			kfree(fh);
-			return -EINVAL;
-		}
-	}
-	/* Increment layer usrs counter */
-	layer->usrs++;
-	/* Set io_allowed member to false */
-	fh->io_allowed = 0;
-	/* Initialize priority of this instance to default priority */
-	fh->prio = V4L2_PRIORITY_UNSET;
-	v4l2_prio_open(&layer->prio, &fh->prio);
-	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev,
-			"vpbe display device opened successfully\n");
-	return 0;
-}
-
-/*
- * vpbe_display_release()
- * This function deletes buffer queue, frees the buffers and the davinci
- * display file * handle
- */
-static int vpbe_display_release(struct file *file)
-{
-	/* Get the layer object and file handle object */
-	struct vpbe_fh *fh = file->private_data;
-	struct vpbe_layer *layer = fh->layer;
-	struct osd_layer_config *cfg  = &layer->layer_info.config;
-	struct vpbe_display *disp_dev = fh->disp_dev;
-	struct vpbe_device *vpbe_dev = disp_dev->vpbe_dev;
-	struct osd_state *osd_device = disp_dev->osd_device;
-
-	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "vpbe_display_release\n");
-
-	mutex_lock(&layer->opslock);
-	/* if this instance is doing IO */
-	if (fh->io_allowed) {
-		/* Reset io_usrs member of layer object */
-		layer->io_usrs = 0;
-
-		osd_device->ops.disable_layer(osd_device,
-				layer->layer_info.id);
-		layer->started = 0;
-		/* Free buffers allocated */
-		videobuf_queue_cancel(&layer->buffer_queue);
-		videobuf_mmap_free(&layer->buffer_queue);
-	}
-
-	/* Decrement layer usrs counter */
-	layer->usrs--;
-	/* If this file handle has initialize encoder device, reset it */
-	if (!layer->usrs) {
-		if (cfg->pixfmt == PIXFMT_NV12) {
-			struct vpbe_layer *otherlayer;
-			otherlayer =
-			_vpbe_display_get_other_win_layer(disp_dev, layer);
-			osd_device->ops.disable_layer(osd_device,
-					otherlayer->layer_info.id);
-			osd_device->ops.release_layer(osd_device,
-					otherlayer->layer_info.id);
-		}
-		osd_device->ops.disable_layer(osd_device,
-				layer->layer_info.id);
-		osd_device->ops.release_layer(osd_device,
-				layer->layer_info.id);
-	}
-	/* Close the priority */
-	v4l2_prio_close(&layer->prio, fh->prio);
-	file->private_data = NULL;
-	mutex_unlock(&layer->opslock);
-
-	/* Free memory allocated to file handle object */
-	kfree(fh);
-
-	disp_dev->cbcr_ofst = 0;
-
-	return 0;
-}
-
-#ifdef CONFIG_VIDEO_ADV_DEBUG
-static int vpbe_display_g_register(struct file *file, void *priv,
-			struct v4l2_dbg_register *reg)
-{
-	struct v4l2_dbg_match *match = &reg->match;
-	struct vpbe_fh *fh = file->private_data;
-	struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev;
-
-	if (match->type >= 2) {
-		v4l2_subdev_call(vpbe_dev->venc,
-				 core,
-				 g_register,
-				 reg);
-	}
-
-	return 0;
-}
-
-static int vpbe_display_s_register(struct file *file, void *priv,
-			struct v4l2_dbg_register *reg)
-{
-	return 0;
-}
-#endif
-
-/* vpbe capture ioctl operations */
-static const struct v4l2_ioctl_ops vpbe_ioctl_ops = {
-	.vidioc_querycap	 = vpbe_display_querycap,
-	.vidioc_g_fmt_vid_out    = vpbe_display_g_fmt,
-	.vidioc_enum_fmt_vid_out = vpbe_display_enum_fmt,
-	.vidioc_s_fmt_vid_out    = vpbe_display_s_fmt,
-	.vidioc_try_fmt_vid_out  = vpbe_display_try_fmt,
-	.vidioc_reqbufs		 = vpbe_display_reqbufs,
-	.vidioc_querybuf	 = vpbe_display_querybuf,
-	.vidioc_qbuf		 = vpbe_display_qbuf,
-	.vidioc_dqbuf		 = vpbe_display_dqbuf,
-	.vidioc_streamon	 = vpbe_display_streamon,
-	.vidioc_streamoff	 = vpbe_display_streamoff,
-	.vidioc_cropcap		 = vpbe_display_cropcap,
-	.vidioc_g_crop		 = vpbe_display_g_crop,
-	.vidioc_s_crop		 = vpbe_display_s_crop,
-	.vidioc_g_priority	 = vpbe_display_g_priority,
-	.vidioc_s_priority	 = vpbe_display_s_priority,
-	.vidioc_s_std		 = vpbe_display_s_std,
-	.vidioc_g_std		 = vpbe_display_g_std,
-	.vidioc_enum_output	 = vpbe_display_enum_output,
-	.vidioc_s_output	 = vpbe_display_s_output,
-	.vidioc_g_output	 = vpbe_display_g_output,
-	.vidioc_s_dv_preset	 = vpbe_display_s_dv_preset,
-	.vidioc_g_dv_preset	 = vpbe_display_g_dv_preset,
-	.vidioc_enum_dv_presets	 = vpbe_display_enum_dv_presets,
-#ifdef CONFIG_VIDEO_ADV_DEBUG
-	.vidioc_g_register	 = vpbe_display_g_register,
-	.vidioc_s_register	 = vpbe_display_s_register,
-#endif
-};
-
-static struct v4l2_file_operations vpbe_fops = {
-	.owner = THIS_MODULE,
-	.open = vpbe_display_open,
-	.release = vpbe_display_release,
-	.unlocked_ioctl = video_ioctl2,
-	.mmap = vpbe_display_mmap,
-	.poll = vpbe_display_poll
-};
-
-static int vpbe_device_get(struct device *dev, void *data)
-{
-	struct platform_device *pdev = to_platform_device(dev);
-	struct vpbe_display *vpbe_disp  = data;
-
-	if (strcmp("vpbe_controller", pdev->name) == 0)
-		vpbe_disp->vpbe_dev = platform_get_drvdata(pdev);
-
-	if (strcmp("vpbe-osd", pdev->name) == 0)
-		vpbe_disp->osd_device = platform_get_drvdata(pdev);
-
-	return 0;
-}
-
-static __devinit int init_vpbe_layer(int i, struct vpbe_display *disp_dev,
-				     struct platform_device *pdev)
-{
-	struct vpbe_layer *vpbe_display_layer = NULL;
-	struct video_device *vbd = NULL;
-
-	/* Allocate memory for four plane display objects */
-
-	disp_dev->dev[i] =
-		kzalloc(sizeof(struct vpbe_layer), GFP_KERNEL);
-
-	/* If memory allocation fails, return error */
-	if (!disp_dev->dev[i]) {
-		printk(KERN_ERR "ran out of memory\n");
-		return  -ENOMEM;
-	}
-	spin_lock_init(&disp_dev->dev[i]->irqlock);
-	mutex_init(&disp_dev->dev[i]->opslock);
-
-	/* Get the pointer to the layer object */
-	vpbe_display_layer = disp_dev->dev[i];
-	vbd = &vpbe_display_layer->video_dev;
-	/* Initialize field of video device */
-	vbd->release	= video_device_release_empty;
-	vbd->fops	= &vpbe_fops;
-	vbd->ioctl_ops	= &vpbe_ioctl_ops;
-	vbd->minor	= -1;
-	vbd->v4l2_dev   = &disp_dev->vpbe_dev->v4l2_dev;
-	vbd->lock	= &vpbe_display_layer->opslock;
-
-	if (disp_dev->vpbe_dev->current_timings.timings_type &
-			VPBE_ENC_STD) {
-		vbd->tvnorms = (V4L2_STD_525_60 | V4L2_STD_625_50);
-		vbd->current_norm =
-			disp_dev->vpbe_dev->
-			current_timings.timings.std_id;
-	} else
-		vbd->current_norm = 0;
-
-	snprintf(vbd->name, sizeof(vbd->name),
-			"DaVinci_VPBE Display_DRIVER_V%d.%d.%d",
-			(VPBE_DISPLAY_VERSION_CODE >> 16) & 0xff,
-			(VPBE_DISPLAY_VERSION_CODE >> 8) & 0xff,
-			(VPBE_DISPLAY_VERSION_CODE) & 0xff);
-
-	vpbe_display_layer->device_id = i;
-
-	vpbe_display_layer->layer_info.id =
-		((i == VPBE_DISPLAY_DEVICE_0) ? WIN_VID0 : WIN_VID1);
-
-	/* Initialize prio member of layer object */
-	v4l2_prio_init(&vpbe_display_layer->prio);
-
-	return 0;
-}
-
-static __devinit int register_device(struct vpbe_layer *vpbe_display_layer,
-					struct vpbe_display *disp_dev,
-					struct platform_device *pdev) {
-	int err;
-
-	v4l2_info(&disp_dev->vpbe_dev->v4l2_dev,
-		  "Trying to register VPBE display device.\n");
-	v4l2_info(&disp_dev->vpbe_dev->v4l2_dev,
-		  "layer=%x,layer->video_dev=%x\n",
-		  (int)vpbe_display_layer,
-		  (int)&vpbe_display_layer->video_dev);
-
-	err = video_register_device(&vpbe_display_layer->video_dev,
-				    VFL_TYPE_GRABBER,
-				    -1);
-	if (err)
-		return -ENODEV;
-
-	vpbe_display_layer->disp_dev = disp_dev;
-	/* set the driver data in platform device */
-	platform_set_drvdata(pdev, disp_dev);
-	video_set_drvdata(&vpbe_display_layer->video_dev,
-			  vpbe_display_layer);
-
-	return 0;
-}
-
-
-
-/*
- * vpbe_display_probe()
- * This function creates device entries by register itself to the V4L2 driver
- * and initializes fields of each layer objects
- */
-static __devinit int vpbe_display_probe(struct platform_device *pdev)
-{
-	struct vpbe_layer *vpbe_display_layer;
-	struct vpbe_display *disp_dev;
-	struct resource *res = NULL;
-	int k;
-	int i;
-	int err;
-	int irq;
-
-	printk(KERN_DEBUG "vpbe_display_probe\n");
-	/* Allocate memory for vpbe_display */
-	disp_dev = kzalloc(sizeof(struct vpbe_display), GFP_KERNEL);
-	if (!disp_dev) {
-		printk(KERN_ERR "ran out of memory\n");
-		return -ENOMEM;
-	}
-
-	spin_lock_init(&disp_dev->dma_queue_lock);
-	/*
-	 * Scan all the platform devices to find the vpbe
-	 * controller device and get the vpbe_dev object
-	 */
-	err = bus_for_each_dev(&platform_bus_type, NULL, disp_dev,
-			vpbe_device_get);
-	if (err < 0)
-		return err;
-	/* Initialize the vpbe display controller */
-	if (NULL != disp_dev->vpbe_dev->ops.initialize) {
-		err = disp_dev->vpbe_dev->ops.initialize(&pdev->dev,
-							 disp_dev->vpbe_dev);
-		if (err) {
-			v4l2_err(&disp_dev->vpbe_dev->v4l2_dev,
-					"Error initing vpbe\n");
-			err = -ENOMEM;
-			goto probe_out;
-		}
-	}
-
-	for (i = 0; i < VPBE_DISPLAY_MAX_DEVICES; i++) {
-		if (init_vpbe_layer(i, disp_dev, pdev)) {
-			err = -ENODEV;
-			goto probe_out;
-		}
-	}
-
-	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
-	if (!res) {
-		v4l2_err(&disp_dev->vpbe_dev->v4l2_dev,
-			 "Unable to get VENC interrupt resource\n");
-		err = -ENODEV;
-		goto probe_out;
-	}
-
-	irq = res->start;
-	if (request_irq(irq, venc_isr,  IRQF_DISABLED, VPBE_DISPLAY_DRIVER,
-		disp_dev)) {
-		v4l2_err(&disp_dev->vpbe_dev->v4l2_dev,
-				"Unable to request interrupt\n");
-		err = -ENODEV;
-		goto probe_out;
-	}
-
-	for (i = 0; i < VPBE_DISPLAY_MAX_DEVICES; i++) {
-		if (register_device(disp_dev->dev[i], disp_dev, pdev)) {
-			err = -ENODEV;
-			goto probe_out_irq;
-		}
-	}
-
-	printk(KERN_DEBUG "Successfully completed the probing of vpbe v4l2 device\n");
-	return 0;
-
-probe_out_irq:
-	free_irq(res->start, disp_dev);
-probe_out:
-	for (k = 0; k < VPBE_DISPLAY_MAX_DEVICES; k++) {
-		/* Get the pointer to the layer object */
-		vpbe_display_layer = disp_dev->dev[k];
-		/* Unregister video device */
-		if (vpbe_display_layer) {
-			video_unregister_device(
-				&vpbe_display_layer->video_dev);
-				kfree(disp_dev->dev[k]);
-		}
-	}
-	kfree(disp_dev);
-	return err;
-}
-
-/*
- * vpbe_display_remove()
- * It un-register hardware layer from V4L2 driver
- */
-static int vpbe_display_remove(struct platform_device *pdev)
-{
-	struct vpbe_layer *vpbe_display_layer;
-	struct vpbe_display *disp_dev = platform_get_drvdata(pdev);
-	struct vpbe_device *vpbe_dev = disp_dev->vpbe_dev;
-	struct resource *res;
-	int i;
-
-	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "vpbe_display_remove\n");
-
-	/* unregister irq */
-	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
-	free_irq(res->start, disp_dev);
-
-	/* deinitialize the vpbe display controller */
-	if (NULL != vpbe_dev->ops.deinitialize)
-		vpbe_dev->ops.deinitialize(&pdev->dev, vpbe_dev);
-	/* un-register device */
-	for (i = 0; i < VPBE_DISPLAY_MAX_DEVICES; i++) {
-		/* Get the pointer to the layer object */
-		vpbe_display_layer = disp_dev->dev[i];
-		/* Unregister video device */
-		video_unregister_device(&vpbe_display_layer->video_dev);
-
-	}
-	for (i = 0; i < VPBE_DISPLAY_MAX_DEVICES; i++) {
-		kfree(disp_dev->dev[i]);
-		disp_dev->dev[i] = NULL;
-	}
-
-	return 0;
-}
-
-static struct platform_driver vpbe_display_driver = {
-	.driver = {
-		.name = VPBE_DISPLAY_DRIVER,
-		.owner = THIS_MODULE,
-		.bus = &platform_bus_type,
-	},
-	.probe = vpbe_display_probe,
-	.remove = __devexit_p(vpbe_display_remove),
-};
-
-module_platform_driver(vpbe_display_driver);
-
-MODULE_DESCRIPTION("TI DM644x/DM355/DM365 VPBE Display controller");
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Texas Instruments");
diff --git a/drivers/media/video/davinci/vpbe_osd.c b/drivers/media/video/davinci/vpbe_osd.c
deleted file mode 100644
index bba299dbf39..00000000000
--- a/drivers/media/video/davinci/vpbe_osd.c
+++ /dev/null
@@ -1,1605 +0,0 @@
-/*
- * Copyright (C) 2007-2010 Texas Instruments Inc
- * Copyright (C) 2007 MontaVista Software, Inc.
- *
- * Andy Lowe (alowe@mvista.com), MontaVista Software
- * - Initial version
- * Murali Karicheri (mkaricheri@gmail.com), Texas Instruments Ltd.
- * - ported to sub device interface
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation version 2.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/clk.h>
-#include <linux/slab.h>
-
-#include <mach/cputype.h>
-#include <mach/hardware.h>
-
-#include <media/davinci/vpss.h>
-#include <media/v4l2-device.h>
-#include <media/davinci/vpbe_types.h>
-#include <media/davinci/vpbe_osd.h>
-
-#include <linux/io.h>
-#include "vpbe_osd_regs.h"
-
-#define MODULE_NAME	VPBE_OSD_SUBDEV_NAME
-
-/* register access routines */
-static inline u32 osd_read(struct osd_state *sd, u32 offset)
-{
-	struct osd_state *osd = sd;
-
-	return readl(osd->osd_base + offset);
-}
-
-static inline u32 osd_write(struct osd_state *sd, u32 val, u32 offset)
-{
-	struct osd_state *osd = sd;
-
-	writel(val, osd->osd_base + offset);
-
-	return val;
-}
-
-static inline u32 osd_set(struct osd_state *sd, u32 mask, u32 offset)
-{
-	struct osd_state *osd = sd;
-
-	u32 addr = osd->osd_base + offset;
-	u32 val = readl(addr) | mask;
-
-	writel(val, addr);
-
-	return val;
-}
-
-static inline u32 osd_clear(struct osd_state *sd, u32 mask, u32 offset)
-{
-	struct osd_state *osd = sd;
-
-	u32 addr = osd->osd_base + offset;
-	u32 val = readl(addr) & ~mask;
-
-	writel(val, addr);
-
-	return val;
-}
-
-static inline u32 osd_modify(struct osd_state *sd, u32 mask, u32 val,
-				 u32 offset)
-{
-	struct osd_state *osd = sd;
-
-	u32 addr = osd->osd_base + offset;
-	u32 new_val = (readl(addr) & ~mask) | (val & mask);
-
-	writel(new_val, addr);
-
-	return new_val;
-}
-
-/* define some macros for layer and pixfmt classification */
-#define is_osd_win(layer) (((layer) == WIN_OSD0) || ((layer) == WIN_OSD1))
-#define is_vid_win(layer) (((layer) == WIN_VID0) || ((layer) == WIN_VID1))
-#define is_rgb_pixfmt(pixfmt) \
-	(((pixfmt) == PIXFMT_RGB565) || ((pixfmt) == PIXFMT_RGB888))
-#define is_yc_pixfmt(pixfmt) \
-	(((pixfmt) == PIXFMT_YCbCrI) || ((pixfmt) == PIXFMT_YCrCbI) || \
-	((pixfmt) == PIXFMT_NV12))
-#define MAX_WIN_SIZE OSD_VIDWIN0XP_V0X
-#define MAX_LINE_LENGTH (OSD_VIDWIN0OFST_V0LO << 5)
-
-/**
- * _osd_dm6446_vid0_pingpong() - field inversion fix for DM6446
- * @sd - ptr to struct osd_state
- * @field_inversion - inversion flag
- * @fb_base_phys - frame buffer address
- * @lconfig - ptr to layer config
- *
- * This routine implements a workaround for the field signal inversion silicon
- * erratum described in Advisory 1.3.8 for the DM6446.  The fb_base_phys and
- * lconfig parameters apply to the vid0 window.  This routine should be called
- * whenever the vid0 layer configuration or start address is modified, or when
- * the OSD field inversion setting is modified.
- * Returns: 1 if the ping-pong buffers need to be toggled in the vsync isr, or
- *          0 otherwise
- */
-static int _osd_dm6446_vid0_pingpong(struct osd_state *sd,
-				     int field_inversion,
-				     unsigned long fb_base_phys,
-				     const struct osd_layer_config *lconfig)
-{
-	struct osd_platform_data *pdata;
-
-	pdata = (struct osd_platform_data *)sd->dev->platform_data;
-	if (pdata->field_inv_wa_enable) {
-
-		if (!field_inversion || !lconfig->interlaced) {
-			osd_write(sd, fb_base_phys & ~0x1F, OSD_VIDWIN0ADR);
-			osd_write(sd, fb_base_phys & ~0x1F, OSD_PPVWIN0ADR);
-			osd_modify(sd, OSD_MISCCTL_PPSW | OSD_MISCCTL_PPRV, 0,
-				   OSD_MISCCTL);
-			return 0;
-		} else {
-			unsigned miscctl = OSD_MISCCTL_PPRV;
-
-			osd_write(sd,
-				(fb_base_phys & ~0x1F) - lconfig->line_length,
-				OSD_VIDWIN0ADR);
-			osd_write(sd,
-				(fb_base_phys & ~0x1F) + lconfig->line_length,
-				OSD_PPVWIN0ADR);
-			osd_modify(sd,
-				OSD_MISCCTL_PPSW | OSD_MISCCTL_PPRV, miscctl,
-				OSD_MISCCTL);
-
-			return 1;
-		}
-	}
-
-	return 0;
-}
-
-static void _osd_set_field_inversion(struct osd_state *sd, int enable)
-{
-	unsigned fsinv = 0;
-
-	if (enable)
-		fsinv = OSD_MODE_FSINV;
-
-	osd_modify(sd, OSD_MODE_FSINV, fsinv, OSD_MODE);
-}
-
-static void _osd_set_blink_attribute(struct osd_state *sd, int enable,
-				     enum osd_blink_interval blink)
-{
-	u32 osdatrmd = 0;
-
-	if (enable) {
-		osdatrmd |= OSD_OSDATRMD_BLNK;
-		osdatrmd |= blink << OSD_OSDATRMD_BLNKINT_SHIFT;
-	}
-	/* caller must ensure that OSD1 is configured in attribute mode */
-	osd_modify(sd, OSD_OSDATRMD_BLNKINT | OSD_OSDATRMD_BLNK, osdatrmd,
-		  OSD_OSDATRMD);
-}
-
-static void _osd_set_rom_clut(struct osd_state *sd,
-			      enum osd_rom_clut rom_clut)
-{
-	if (rom_clut == ROM_CLUT0)
-		osd_clear(sd, OSD_MISCCTL_RSEL, OSD_MISCCTL);
-	else
-		osd_set(sd, OSD_MISCCTL_RSEL, OSD_MISCCTL);
-}
-
-static void _osd_set_palette_map(struct osd_state *sd,
-				 enum osd_win_layer osdwin,
-				 unsigned char pixel_value,
-				 unsigned char clut_index,
-				 enum osd_pix_format pixfmt)
-{
-	static const int map_2bpp[] = { 0, 5, 10, 15 };
-	static const int map_1bpp[] = { 0, 15 };
-	int bmp_offset;
-	int bmp_shift;
-	int bmp_mask;
-	int bmp_reg;
-
-	switch (pixfmt) {
-	case PIXFMT_1BPP:
-		bmp_reg = map_1bpp[pixel_value & 0x1];
-		break;
-	case PIXFMT_2BPP:
-		bmp_reg = map_2bpp[pixel_value & 0x3];
-		break;
-	case PIXFMT_4BPP:
-		bmp_reg = pixel_value & 0xf;
-		break;
-	default:
-		return;
-	}
-
-	switch (osdwin) {
-	case OSDWIN_OSD0:
-		bmp_offset = OSD_W0BMP01 + (bmp_reg >> 1) * sizeof(u32);
-		break;
-	case OSDWIN_OSD1:
-		bmp_offset = OSD_W1BMP01 + (bmp_reg >> 1) * sizeof(u32);
-		break;
-	default:
-		return;
-	}
-
-	if (bmp_reg & 1) {
-		bmp_shift = 8;
-		bmp_mask = 0xff << 8;
-	} else {
-		bmp_shift = 0;
-		bmp_mask = 0xff;
-	}
-
-	osd_modify(sd, bmp_mask, clut_index << bmp_shift, bmp_offset);
-}
-
-static void _osd_set_rec601_attenuation(struct osd_state *sd,
-					enum osd_win_layer osdwin, int enable)
-{
-	switch (osdwin) {
-	case OSDWIN_OSD0:
-		osd_modify(sd, OSD_OSDWIN0MD_ATN0E,
-			  enable ? OSD_OSDWIN0MD_ATN0E : 0,
-			  OSD_OSDWIN0MD);
-		if (sd->vpbe_type == VPBE_VERSION_1)
-			osd_modify(sd, OSD_OSDWIN0MD_ATN0E,
-				  enable ? OSD_OSDWIN0MD_ATN0E : 0,
-				  OSD_OSDWIN0MD);
-		else if ((sd->vpbe_type == VPBE_VERSION_3) ||
-			   (sd->vpbe_type == VPBE_VERSION_2))
-			osd_modify(sd, OSD_EXTMODE_ATNOSD0EN,
-				  enable ? OSD_EXTMODE_ATNOSD0EN : 0,
-				  OSD_EXTMODE);
-		break;
-	case OSDWIN_OSD1:
-		osd_modify(sd, OSD_OSDWIN1MD_ATN1E,
-			  enable ? OSD_OSDWIN1MD_ATN1E : 0,
-			  OSD_OSDWIN1MD);
-		if (sd->vpbe_type == VPBE_VERSION_1)
-			osd_modify(sd, OSD_OSDWIN1MD_ATN1E,
-				  enable ? OSD_OSDWIN1MD_ATN1E : 0,
-				  OSD_OSDWIN1MD);
-		else if ((sd->vpbe_type == VPBE_VERSION_3) ||
-			   (sd->vpbe_type == VPBE_VERSION_2))
-			osd_modify(sd, OSD_EXTMODE_ATNOSD1EN,
-				  enable ? OSD_EXTMODE_ATNOSD1EN : 0,
-				  OSD_EXTMODE);
-		break;
-	}
-}
-
-static void _osd_set_blending_factor(struct osd_state *sd,
-				     enum osd_win_layer osdwin,
-				     enum osd_blending_factor blend)
-{
-	switch (osdwin) {
-	case OSDWIN_OSD0:
-		osd_modify(sd, OSD_OSDWIN0MD_BLND0,
-			  blend << OSD_OSDWIN0MD_BLND0_SHIFT, OSD_OSDWIN0MD);
-		break;
-	case OSDWIN_OSD1:
-		osd_modify(sd, OSD_OSDWIN1MD_BLND1,
-			  blend << OSD_OSDWIN1MD_BLND1_SHIFT, OSD_OSDWIN1MD);
-		break;
-	}
-}
-
-static void _osd_enable_rgb888_pixblend(struct osd_state *sd,
-					enum osd_win_layer osdwin)
-{
-
-	osd_modify(sd, OSD_MISCCTL_BLDSEL, 0, OSD_MISCCTL);
-	switch (osdwin) {
-	case OSDWIN_OSD0:
-		osd_modify(sd, OSD_EXTMODE_OSD0BLDCHR,
-			  OSD_EXTMODE_OSD0BLDCHR, OSD_EXTMODE);
-		break;
-	case OSDWIN_OSD1:
-		osd_modify(sd, OSD_EXTMODE_OSD1BLDCHR,
-			  OSD_EXTMODE_OSD1BLDCHR, OSD_EXTMODE);
-		break;
-	}
-}
-
-static void _osd_enable_color_key(struct osd_state *sd,
-				  enum osd_win_layer osdwin,
-				  unsigned colorkey,
-				  enum osd_pix_format pixfmt)
-{
-	switch (pixfmt) {
-	case PIXFMT_1BPP:
-	case PIXFMT_2BPP:
-	case PIXFMT_4BPP:
-	case PIXFMT_8BPP:
-		if (sd->vpbe_type == VPBE_VERSION_3) {
-			switch (osdwin) {
-			case OSDWIN_OSD0:
-				osd_modify(sd, OSD_TRANSPBMPIDX_BMP0,
-					  colorkey <<
-					  OSD_TRANSPBMPIDX_BMP0_SHIFT,
-					  OSD_TRANSPBMPIDX);
-				break;
-			case OSDWIN_OSD1:
-				osd_modify(sd, OSD_TRANSPBMPIDX_BMP1,
-					  colorkey <<
-					  OSD_TRANSPBMPIDX_BMP1_SHIFT,
-					  OSD_TRANSPBMPIDX);
-				break;
-			}
-		}
-		break;
-	case PIXFMT_RGB565:
-		if (sd->vpbe_type == VPBE_VERSION_1)
-			osd_write(sd, colorkey & OSD_TRANSPVAL_RGBTRANS,
-				  OSD_TRANSPVAL);
-		else if (sd->vpbe_type == VPBE_VERSION_3)
-			osd_write(sd, colorkey & OSD_TRANSPVALL_RGBL,
-				  OSD_TRANSPVALL);
-		break;
-	case PIXFMT_YCbCrI:
-	case PIXFMT_YCrCbI:
-		if (sd->vpbe_type == VPBE_VERSION_3)
-			osd_modify(sd, OSD_TRANSPVALU_Y, colorkey,
-				   OSD_TRANSPVALU);
-		break;
-	case PIXFMT_RGB888:
-		if (sd->vpbe_type == VPBE_VERSION_3) {
-			osd_write(sd, colorkey & OSD_TRANSPVALL_RGBL,
-				  OSD_TRANSPVALL);
-			osd_modify(sd, OSD_TRANSPVALU_RGBU, colorkey >> 16,
-				  OSD_TRANSPVALU);
-		}
-		break;
-	default:
-		break;
-	}
-
-	switch (osdwin) {
-	case OSDWIN_OSD0:
-		osd_set(sd, OSD_OSDWIN0MD_TE0, OSD_OSDWIN0MD);
-		break;
-	case OSDWIN_OSD1:
-		osd_set(sd, OSD_OSDWIN1MD_TE1, OSD_OSDWIN1MD);
-		break;
-	}
-}
-
-static void _osd_disable_color_key(struct osd_state *sd,
-				   enum osd_win_layer osdwin)
-{
-	switch (osdwin) {
-	case OSDWIN_OSD0:
-		osd_clear(sd, OSD_OSDWIN0MD_TE0, OSD_OSDWIN0MD);
-		break;
-	case OSDWIN_OSD1:
-		osd_clear(sd, OSD_OSDWIN1MD_TE1, OSD_OSDWIN1MD);
-		break;
-	}
-}
-
-static void _osd_set_osd_clut(struct osd_state *sd,
-			      enum osd_win_layer osdwin,
-			      enum osd_clut clut)
-{
-	u32 winmd = 0;
-
-	switch (osdwin) {
-	case OSDWIN_OSD0:
-		if (clut == RAM_CLUT)
-			winmd |= OSD_OSDWIN0MD_CLUTS0;
-		osd_modify(sd, OSD_OSDWIN0MD_CLUTS0, winmd, OSD_OSDWIN0MD);
-		break;
-	case OSDWIN_OSD1:
-		if (clut == RAM_CLUT)
-			winmd |= OSD_OSDWIN1MD_CLUTS1;
-		osd_modify(sd, OSD_OSDWIN1MD_CLUTS1, winmd, OSD_OSDWIN1MD);
-		break;
-	}
-}
-
-static void _osd_set_zoom(struct osd_state *sd, enum osd_layer layer,
-			  enum osd_zoom_factor h_zoom,
-			  enum osd_zoom_factor v_zoom)
-{
-	u32 winmd = 0;
-
-	switch (layer) {
-	case WIN_OSD0:
-		winmd |= (h_zoom << OSD_OSDWIN0MD_OHZ0_SHIFT);
-		winmd |= (v_zoom << OSD_OSDWIN0MD_OVZ0_SHIFT);
-		osd_modify(sd, OSD_OSDWIN0MD_OHZ0 | OSD_OSDWIN0MD_OVZ0, winmd,
-			  OSD_OSDWIN0MD);
-		break;
-	case WIN_VID0:
-		winmd |= (h_zoom << OSD_VIDWINMD_VHZ0_SHIFT);
-		winmd |= (v_zoom << OSD_VIDWINMD_VVZ0_SHIFT);
-		osd_modify(sd, OSD_VIDWINMD_VHZ0 | OSD_VIDWINMD_VVZ0, winmd,
-			  OSD_VIDWINMD);
-		break;
-	case WIN_OSD1:
-		winmd |= (h_zoom << OSD_OSDWIN1MD_OHZ1_SHIFT);
-		winmd |= (v_zoom << OSD_OSDWIN1MD_OVZ1_SHIFT);
-		osd_modify(sd, OSD_OSDWIN1MD_OHZ1 | OSD_OSDWIN1MD_OVZ1, winmd,
-			  OSD_OSDWIN1MD);
-		break;
-	case WIN_VID1:
-		winmd |= (h_zoom << OSD_VIDWINMD_VHZ1_SHIFT);
-		winmd |= (v_zoom << OSD_VIDWINMD_VVZ1_SHIFT);
-		osd_modify(sd, OSD_VIDWINMD_VHZ1 | OSD_VIDWINMD_VVZ1, winmd,
-			  OSD_VIDWINMD);
-		break;
-	}
-}
-
-static void _osd_disable_layer(struct osd_state *sd, enum osd_layer layer)
-{
-	switch (layer) {
-	case WIN_OSD0:
-		osd_clear(sd, OSD_OSDWIN0MD_OACT0, OSD_OSDWIN0MD);
-		break;
-	case WIN_VID0:
-		osd_clear(sd, OSD_VIDWINMD_ACT0, OSD_VIDWINMD);
-		break;
-	case WIN_OSD1:
-		/* disable attribute mode as well as disabling the window */
-		osd_clear(sd, OSD_OSDWIN1MD_OASW | OSD_OSDWIN1MD_OACT1,
-			  OSD_OSDWIN1MD);
-		break;
-	case WIN_VID1:
-		osd_clear(sd, OSD_VIDWINMD_ACT1, OSD_VIDWINMD);
-		break;
-	}
-}
-
-static void osd_disable_layer(struct osd_state *sd, enum osd_layer layer)
-{
-	struct osd_state *osd = sd;
-	struct osd_window_state *win = &osd->win[layer];
-	unsigned long flags;
-
-	spin_lock_irqsave(&osd->lock, flags);
-
-	if (!win->is_enabled) {
-		spin_unlock_irqrestore(&osd->lock, flags);
-		return;
-	}
-	win->is_enabled = 0;
-
-	_osd_disable_layer(sd, layer);
-
-	spin_unlock_irqrestore(&osd->lock, flags);
-}
-
-static void _osd_enable_attribute_mode(struct osd_state *sd)
-{
-	/* enable attribute mode for OSD1 */
-	osd_set(sd, OSD_OSDWIN1MD_OASW, OSD_OSDWIN1MD);
-}
-
-static void _osd_enable_layer(struct osd_state *sd, enum osd_layer layer)
-{
-	switch (layer) {
-	case WIN_OSD0:
-		osd_set(sd, OSD_OSDWIN0MD_OACT0, OSD_OSDWIN0MD);
-		break;
-	case WIN_VID0:
-		osd_set(sd, OSD_VIDWINMD_ACT0, OSD_VIDWINMD);
-		break;
-	case WIN_OSD1:
-		/* enable OSD1 and disable attribute mode */
-		osd_modify(sd, OSD_OSDWIN1MD_OASW | OSD_OSDWIN1MD_OACT1,
-			  OSD_OSDWIN1MD_OACT1, OSD_OSDWIN1MD);
-		break;
-	case WIN_VID1:
-		osd_set(sd, OSD_VIDWINMD_ACT1, OSD_VIDWINMD);
-		break;
-	}
-}
-
-static int osd_enable_layer(struct osd_state *sd, enum osd_layer layer,
-			    int otherwin)
-{
-	struct osd_state *osd = sd;
-	struct osd_window_state *win = &osd->win[layer];
-	struct osd_layer_config *cfg = &win->lconfig;
-	unsigned long flags;
-
-	spin_lock_irqsave(&osd->lock, flags);
-
-	/*
-	 * use otherwin flag to know this is the other vid window
-	 * in YUV420 mode, if is, skip this check
-	 */
-	if (!otherwin && (!win->is_allocated ||
-			!win->fb_base_phys ||
-			!cfg->line_length ||
-			!cfg->xsize ||
-			!cfg->ysize)) {
-		spin_unlock_irqrestore(&osd->lock, flags);
-		return -1;
-	}
-
-	if (win->is_enabled) {
-		spin_unlock_irqrestore(&osd->lock, flags);
-		return 0;
-	}
-	win->is_enabled = 1;
-
-	if (cfg->pixfmt != PIXFMT_OSD_ATTR)
-		_osd_enable_layer(sd, layer);
-	else {
-		_osd_enable_attribute_mode(sd);
-		_osd_set_blink_attribute(sd, osd->is_blinking, osd->blink);
-	}
-
-	spin_unlock_irqrestore(&osd->lock, flags);
-
-	return 0;
-}
-
-#define OSD_SRC_ADDR_HIGH4	0x7800000
-#define OSD_SRC_ADDR_HIGH7	0x7F0000
-#define OSD_SRCADD_OFSET_SFT	23
-#define OSD_SRCADD_ADD_SFT	16
-#define OSD_WINADL_MASK		0xFFFF
-#define OSD_WINOFST_MASK	0x1000
-#define VPBE_REG_BASE		0x80000000
-
-static void _osd_start_layer(struct osd_state *sd, enum osd_layer layer,
-			     unsigned long fb_base_phys,
-			     unsigned long cbcr_ofst)
-{
-
-	if (sd->vpbe_type == VPBE_VERSION_1) {
-		switch (layer) {
-		case WIN_OSD0:
-			osd_write(sd, fb_base_phys & ~0x1F, OSD_OSDWIN0ADR);
-			break;
-		case WIN_VID0:
-			osd_write(sd, fb_base_phys & ~0x1F, OSD_VIDWIN0ADR);
-			break;
-		case WIN_OSD1:
-			osd_write(sd, fb_base_phys & ~0x1F, OSD_OSDWIN1ADR);
-			break;
-		case WIN_VID1:
-			osd_write(sd, fb_base_phys & ~0x1F, OSD_VIDWIN1ADR);
-			break;
-	      }
-	} else if (sd->vpbe_type == VPBE_VERSION_3) {
-		unsigned long fb_offset_32 =
-		    (fb_base_phys - VPBE_REG_BASE) >> 5;
-
-		switch (layer) {
-		case WIN_OSD0:
-			osd_modify(sd, OSD_OSDWINADH_O0AH,
-				  fb_offset_32 >> (OSD_SRCADD_ADD_SFT -
-						   OSD_OSDWINADH_O0AH_SHIFT),
-				  OSD_OSDWINADH);
-			osd_write(sd, fb_offset_32 & OSD_OSDWIN0ADL_O0AL,
-				  OSD_OSDWIN0ADL);
-			break;
-		case WIN_VID0:
-			osd_modify(sd, OSD_VIDWINADH_V0AH,
-				  fb_offset_32 >> (OSD_SRCADD_ADD_SFT -
-						   OSD_VIDWINADH_V0AH_SHIFT),
-				  OSD_VIDWINADH);
-			osd_write(sd, fb_offset_32 & OSD_VIDWIN0ADL_V0AL,
-				  OSD_VIDWIN0ADL);
-			break;
-		case WIN_OSD1:
-			osd_modify(sd, OSD_OSDWINADH_O1AH,
-				  fb_offset_32 >> (OSD_SRCADD_ADD_SFT -
-						   OSD_OSDWINADH_O1AH_SHIFT),
-				  OSD_OSDWINADH);
-			osd_write(sd, fb_offset_32 & OSD_OSDWIN1ADL_O1AL,
-				  OSD_OSDWIN1ADL);
-			break;
-		case WIN_VID1:
-			osd_modify(sd, OSD_VIDWINADH_V1AH,
-				  fb_offset_32 >> (OSD_SRCADD_ADD_SFT -
-						   OSD_VIDWINADH_V1AH_SHIFT),
-				  OSD_VIDWINADH);
-			osd_write(sd, fb_offset_32 & OSD_VIDWIN1ADL_V1AL,
-				  OSD_VIDWIN1ADL);
-			break;
-		}
-	} else if (sd->vpbe_type == VPBE_VERSION_2) {
-		struct osd_window_state *win = &sd->win[layer];
-		unsigned long fb_offset_32, cbcr_offset_32;
-
-		fb_offset_32 = fb_base_phys - VPBE_REG_BASE;
-		if (cbcr_ofst)
-			cbcr_offset_32 = cbcr_ofst;
-		else
-			cbcr_offset_32 = win->lconfig.line_length *
-					 win->lconfig.ysize;
-		cbcr_offset_32 += fb_offset_32;
-		fb_offset_32 = fb_offset_32 >> 5;
-		cbcr_offset_32 = cbcr_offset_32 >> 5;
-		/*
-		 * DM365: start address is 27-bit long address b26 - b23 are
-		 * in offset register b12 - b9, and * bit 26 has to be '1'
-		 */
-		if (win->lconfig.pixfmt == PIXFMT_NV12) {
-			switch (layer) {
-			case WIN_VID0:
-			case WIN_VID1:
-				/* Y is in VID0 */
-				osd_modify(sd, OSD_VIDWIN0OFST_V0AH,
-					 ((fb_offset_32 & OSD_SRC_ADDR_HIGH4) >>
-					 (OSD_SRCADD_OFSET_SFT -
-					 OSD_WINOFST_AH_SHIFT)) |
-					 OSD_WINOFST_MASK, OSD_VIDWIN0OFST);
-				osd_modify(sd, OSD_VIDWINADH_V0AH,
-					  (fb_offset_32 & OSD_SRC_ADDR_HIGH7) >>
-					  (OSD_SRCADD_ADD_SFT -
-					  OSD_VIDWINADH_V0AH_SHIFT),
-					   OSD_VIDWINADH);
-				osd_write(sd, fb_offset_32 & OSD_WINADL_MASK,
-					  OSD_VIDWIN0ADL);
-				/* CbCr is in VID1 */
-				osd_modify(sd, OSD_VIDWIN1OFST_V1AH,
-					 ((cbcr_offset_32 &
-					 OSD_SRC_ADDR_HIGH4) >>
-					 (OSD_SRCADD_OFSET_SFT -
-					 OSD_WINOFST_AH_SHIFT)) |
-					 OSD_WINOFST_MASK, OSD_VIDWIN1OFST);
-				osd_modify(sd, OSD_VIDWINADH_V1AH,
-					  (cbcr_offset_32 &
-					  OSD_SRC_ADDR_HIGH7) >>
-					  (OSD_SRCADD_ADD_SFT -
-					  OSD_VIDWINADH_V1AH_SHIFT),
-					  OSD_VIDWINADH);
-				osd_write(sd, cbcr_offset_32 & OSD_WINADL_MASK,
-					  OSD_VIDWIN1ADL);
-				break;
-			default:
-				break;
-			}
-		}
-
-		switch (layer) {
-		case WIN_OSD0:
-			osd_modify(sd, OSD_OSDWIN0OFST_O0AH,
-				 ((fb_offset_32 & OSD_SRC_ADDR_HIGH4) >>
-				 (OSD_SRCADD_OFSET_SFT -
-				 OSD_WINOFST_AH_SHIFT)) | OSD_WINOFST_MASK,
-				  OSD_OSDWIN0OFST);
-			osd_modify(sd, OSD_OSDWINADH_O0AH,
-				 (fb_offset_32 & OSD_SRC_ADDR_HIGH7) >>
-				 (OSD_SRCADD_ADD_SFT -
-				 OSD_OSDWINADH_O0AH_SHIFT), OSD_OSDWINADH);
-			osd_write(sd, fb_offset_32 & OSD_WINADL_MASK,
-					OSD_OSDWIN0ADL);
-			break;
-		case WIN_VID0:
-			if (win->lconfig.pixfmt != PIXFMT_NV12) {
-				osd_modify(sd, OSD_VIDWIN0OFST_V0AH,
-					 ((fb_offset_32 & OSD_SRC_ADDR_HIGH4) >>
-					 (OSD_SRCADD_OFSET_SFT -
-					 OSD_WINOFST_AH_SHIFT)) |
-					 OSD_WINOFST_MASK, OSD_VIDWIN0OFST);
-				osd_modify(sd, OSD_VIDWINADH_V0AH,
-					  (fb_offset_32 & OSD_SRC_ADDR_HIGH7) >>
-					  (OSD_SRCADD_ADD_SFT -
-					  OSD_VIDWINADH_V0AH_SHIFT),
-					  OSD_VIDWINADH);
-				osd_write(sd, fb_offset_32 & OSD_WINADL_MASK,
-					  OSD_VIDWIN0ADL);
-			}
-			break;
-		case WIN_OSD1:
-			osd_modify(sd, OSD_OSDWIN1OFST_O1AH,
-				 ((fb_offset_32 & OSD_SRC_ADDR_HIGH4) >>
-				 (OSD_SRCADD_OFSET_SFT -
-				 OSD_WINOFST_AH_SHIFT)) | OSD_WINOFST_MASK,
-				  OSD_OSDWIN1OFST);
-			osd_modify(sd, OSD_OSDWINADH_O1AH,
-				  (fb_offset_32 & OSD_SRC_ADDR_HIGH7) >>
-				  (OSD_SRCADD_ADD_SFT -
-				  OSD_OSDWINADH_O1AH_SHIFT),
-				  OSD_OSDWINADH);
-			osd_write(sd, fb_offset_32 & OSD_WINADL_MASK,
-					OSD_OSDWIN1ADL);
-			break;
-		case WIN_VID1:
-			if (win->lconfig.pixfmt != PIXFMT_NV12) {
-				osd_modify(sd, OSD_VIDWIN1OFST_V1AH,
-					 ((fb_offset_32 & OSD_SRC_ADDR_HIGH4) >>
-					 (OSD_SRCADD_OFSET_SFT -
-					 OSD_WINOFST_AH_SHIFT)) |
-					 OSD_WINOFST_MASK, OSD_VIDWIN1OFST);
-				osd_modify(sd, OSD_VIDWINADH_V1AH,
-					  (fb_offset_32 & OSD_SRC_ADDR_HIGH7) >>
-					  (OSD_SRCADD_ADD_SFT -
-					  OSD_VIDWINADH_V1AH_SHIFT),
-					  OSD_VIDWINADH);
-				osd_write(sd, fb_offset_32 & OSD_WINADL_MASK,
-					  OSD_VIDWIN1ADL);
-			}
-			break;
-		}
-	}
-}
-
-static void osd_start_layer(struct osd_state *sd, enum osd_layer layer,
-			    unsigned long fb_base_phys,
-			    unsigned long cbcr_ofst)
-{
-	struct osd_state *osd = sd;
-	struct osd_window_state *win = &osd->win[layer];
-	struct osd_layer_config *cfg = &win->lconfig;
-	unsigned long flags;
-
-	spin_lock_irqsave(&osd->lock, flags);
-
-	win->fb_base_phys = fb_base_phys & ~0x1F;
-	_osd_start_layer(sd, layer, fb_base_phys, cbcr_ofst);
-
-	if (layer == WIN_VID0) {
-		osd->pingpong =
-		    _osd_dm6446_vid0_pingpong(sd, osd->field_inversion,
-						       win->fb_base_phys,
-						       cfg);
-	}
-
-	spin_unlock_irqrestore(&osd->lock, flags);
-}
-
-static void osd_get_layer_config(struct osd_state *sd, enum osd_layer layer,
-				 struct osd_layer_config *lconfig)
-{
-	struct osd_state *osd = sd;
-	struct osd_window_state *win = &osd->win[layer];
-	unsigned long flags;
-
-	spin_lock_irqsave(&osd->lock, flags);
-
-	*lconfig = win->lconfig;
-
-	spin_unlock_irqrestore(&osd->lock, flags);
-}
-
-/**
- * try_layer_config() - Try a specific configuration for the layer
- * @sd  - ptr to struct osd_state
- * @layer - layer to configure
- * @lconfig - layer configuration to try
- *
- * If the requested lconfig is completely rejected and the value of lconfig on
- * exit is the current lconfig, then try_layer_config() returns 1.  Otherwise,
- * try_layer_config() returns 0.  A return value of 0 does not necessarily mean
- * that the value of lconfig on exit is identical to the value of lconfig on
- * entry, but merely that it represents a change from the current lconfig.
- */
-static int try_layer_config(struct osd_state *sd, enum osd_layer layer,
-			    struct osd_layer_config *lconfig)
-{
-	struct osd_state *osd = sd;
-	struct osd_window_state *win = &osd->win[layer];
-	int bad_config = 0;
-
-	/* verify that the pixel format is compatible with the layer */
-	switch (lconfig->pixfmt) {
-	case PIXFMT_1BPP:
-	case PIXFMT_2BPP:
-	case PIXFMT_4BPP:
-	case PIXFMT_8BPP:
-	case PIXFMT_RGB565:
-		if (osd->vpbe_type == VPBE_VERSION_1)
-			bad_config = !is_vid_win(layer);
-		break;
-	case PIXFMT_YCbCrI:
-	case PIXFMT_YCrCbI:
-		bad_config = !is_vid_win(layer);
-		break;
-	case PIXFMT_RGB888:
-		if (osd->vpbe_type == VPBE_VERSION_1)
-			bad_config = !is_vid_win(layer);
-		else if ((osd->vpbe_type == VPBE_VERSION_3) ||
-			 (osd->vpbe_type == VPBE_VERSION_2))
-			bad_config = !is_osd_win(layer);
-		break;
-	case PIXFMT_NV12:
-		if (osd->vpbe_type != VPBE_VERSION_2)
-			bad_config = 1;
-		else
-			bad_config = is_osd_win(layer);
-		break;
-	case PIXFMT_OSD_ATTR:
-		bad_config = (layer != WIN_OSD1);
-		break;
-	default:
-		bad_config = 1;
-		break;
-	}
-	if (bad_config) {
-		/*
-		 * The requested pixel format is incompatible with the layer,
-		 * so keep the current layer configuration.
-		 */
-		*lconfig = win->lconfig;
-		return bad_config;
-	}
-
-	/* DM6446: */
-	/* only one OSD window at a time can use RGB pixel formats */
-	  if ((osd->vpbe_type == VPBE_VERSION_1) &&
-		  is_osd_win(layer) && is_rgb_pixfmt(lconfig->pixfmt)) {
-		enum osd_pix_format pixfmt;
-		if (layer == WIN_OSD0)
-			pixfmt = osd->win[WIN_OSD1].lconfig.pixfmt;
-		else
-			pixfmt = osd->win[WIN_OSD0].lconfig.pixfmt;
-
-		if (is_rgb_pixfmt(pixfmt)) {
-			/*
-			 * The other OSD window is already configured for an
-			 * RGB, so keep the current layer configuration.
-			 */
-			*lconfig = win->lconfig;
-			return 1;
-		}
-	}
-
-	/* DM6446: only one video window at a time can use RGB888 */
-	if ((osd->vpbe_type == VPBE_VERSION_1) && is_vid_win(layer) &&
-		lconfig->pixfmt == PIXFMT_RGB888) {
-		enum osd_pix_format pixfmt;
-
-		if (layer == WIN_VID0)
-			pixfmt = osd->win[WIN_VID1].lconfig.pixfmt;
-		else
-			pixfmt = osd->win[WIN_VID0].lconfig.pixfmt;
-
-		if (pixfmt == PIXFMT_RGB888) {
-			/*
-			 * The other video window is already configured for
-			 * RGB888, so keep the current layer configuration.
-			 */
-			*lconfig = win->lconfig;
-			return 1;
-		}
-	}
-
-	/* window dimensions must be non-zero */
-	if (!lconfig->line_length || !lconfig->xsize || !lconfig->ysize) {
-		*lconfig = win->lconfig;
-		return 1;
-	}
-
-	/* round line_length up to a multiple of 32 */
-	lconfig->line_length = ((lconfig->line_length + 31) / 32) * 32;
-	lconfig->line_length =
-	    min(lconfig->line_length, (unsigned)MAX_LINE_LENGTH);
-	lconfig->xsize = min(lconfig->xsize, (unsigned)MAX_WIN_SIZE);
-	lconfig->ysize = min(lconfig->ysize, (unsigned)MAX_WIN_SIZE);
-	lconfig->xpos = min(lconfig->xpos, (unsigned)MAX_WIN_SIZE);
-	lconfig->ypos = min(lconfig->ypos, (unsigned)MAX_WIN_SIZE);
-	lconfig->interlaced = (lconfig->interlaced != 0);
-	if (lconfig->interlaced) {
-		/* ysize and ypos must be even for interlaced displays */
-		lconfig->ysize &= ~1;
-		lconfig->ypos &= ~1;
-	}
-
-	return 0;
-}
-
-static void _osd_disable_vid_rgb888(struct osd_state *sd)
-{
-	/*
-	 * The DM6446 supports RGB888 pixel format in a single video window.
-	 * This routine disables RGB888 pixel format for both video windows.
-	 * The caller must ensure that neither video window is currently
-	 * configured for RGB888 pixel format.
-	 */
-	if (sd->vpbe_type == VPBE_VERSION_1)
-		osd_clear(sd, OSD_MISCCTL_RGBEN, OSD_MISCCTL);
-}
-
-static void _osd_enable_vid_rgb888(struct osd_state *sd,
-				   enum osd_layer layer)
-{
-	/*
-	 * The DM6446 supports RGB888 pixel format in a single video window.
-	 * This routine enables RGB888 pixel format for the specified video
-	 * window.  The caller must ensure that the other video window is not
-	 * currently configured for RGB888 pixel format, as this routine will
-	 * disable RGB888 pixel format for the other window.
-	 */
-	if (sd->vpbe_type == VPBE_VERSION_1) {
-		if (layer == WIN_VID0)
-			osd_modify(sd, OSD_MISCCTL_RGBEN | OSD_MISCCTL_RGBWIN,
-				  OSD_MISCCTL_RGBEN, OSD_MISCCTL);
-		else if (layer == WIN_VID1)
-			osd_modify(sd, OSD_MISCCTL_RGBEN | OSD_MISCCTL_RGBWIN,
-				  OSD_MISCCTL_RGBEN | OSD_MISCCTL_RGBWIN,
-				  OSD_MISCCTL);
-	}
-}
-
-static void _osd_set_cbcr_order(struct osd_state *sd,
-				enum osd_pix_format pixfmt)
-{
-	/*
-	 * The caller must ensure that all windows using YC pixfmt use the same
-	 * Cb/Cr order.
-	 */
-	if (pixfmt == PIXFMT_YCbCrI)
-		osd_clear(sd, OSD_MODE_CS, OSD_MODE);
-	else if (pixfmt == PIXFMT_YCrCbI)
-		osd_set(sd, OSD_MODE_CS, OSD_MODE);
-}
-
-static void _osd_set_layer_config(struct osd_state *sd, enum osd_layer layer,
-				  const struct osd_layer_config *lconfig)
-{
-	u32 winmd = 0, winmd_mask = 0, bmw = 0;
-
-	_osd_set_cbcr_order(sd, lconfig->pixfmt);
-
-	switch (layer) {
-	case WIN_OSD0:
-		if (sd->vpbe_type == VPBE_VERSION_1) {
-			winmd_mask |= OSD_OSDWIN0MD_RGB0E;
-			if (lconfig->pixfmt == PIXFMT_RGB565)
-				winmd |= OSD_OSDWIN0MD_RGB0E;
-		} else if ((sd->vpbe_type == VPBE_VERSION_3) ||
-		  (sd->vpbe_type == VPBE_VERSION_2)) {
-			winmd_mask |= OSD_OSDWIN0MD_BMP0MD;
-			switch (lconfig->pixfmt) {
-			case PIXFMT_RGB565:
-					winmd |= (1 <<
-					OSD_OSDWIN0MD_BMP0MD_SHIFT);
-					break;
-			case PIXFMT_RGB888:
-				winmd |= (2 << OSD_OSDWIN0MD_BMP0MD_SHIFT);
-				_osd_enable_rgb888_pixblend(sd, OSDWIN_OSD0);
-				break;
-			case PIXFMT_YCbCrI:
-			case PIXFMT_YCrCbI:
-				winmd |= (3 << OSD_OSDWIN0MD_BMP0MD_SHIFT);
-				break;
-			default:
-				break;
-			}
-		}
-
-		winmd_mask |= OSD_OSDWIN0MD_BMW0 | OSD_OSDWIN0MD_OFF0;
-
-		switch (lconfig->pixfmt) {
-		case PIXFMT_1BPP:
-			bmw = 0;
-			break;
-		case PIXFMT_2BPP:
-			bmw = 1;
-			break;
-		case PIXFMT_4BPP:
-			bmw = 2;
-			break;
-		case PIXFMT_8BPP:
-			bmw = 3;
-			break;
-		default:
-			break;
-		}
-		winmd |= (bmw << OSD_OSDWIN0MD_BMW0_SHIFT);
-
-		if (lconfig->interlaced)
-			winmd |= OSD_OSDWIN0MD_OFF0;
-
-		osd_modify(sd, winmd_mask, winmd, OSD_OSDWIN0MD);
-		osd_write(sd, lconfig->line_length >> 5, OSD_OSDWIN0OFST);
-		osd_write(sd, lconfig->xpos, OSD_OSDWIN0XP);
-		osd_write(sd, lconfig->xsize, OSD_OSDWIN0XL);
-		if (lconfig->interlaced) {
-			osd_write(sd, lconfig->ypos >> 1, OSD_OSDWIN0YP);
-			osd_write(sd, lconfig->ysize >> 1, OSD_OSDWIN0YL);
-		} else {
-			osd_write(sd, lconfig->ypos, OSD_OSDWIN0YP);
-			osd_write(sd, lconfig->ysize, OSD_OSDWIN0YL);
-		}
-		break;
-	case WIN_VID0:
-		winmd_mask |= OSD_VIDWINMD_VFF0;
-		if (lconfig->interlaced)
-			winmd |= OSD_VIDWINMD_VFF0;
-
-		osd_modify(sd, winmd_mask, winmd, OSD_VIDWINMD);
-		osd_write(sd, lconfig->line_length >> 5, OSD_VIDWIN0OFST);
-		osd_write(sd, lconfig->xpos, OSD_VIDWIN0XP);
-		osd_write(sd, lconfig->xsize, OSD_VIDWIN0XL);
-		/*
-		 * For YUV420P format the register contents are
-		 * duplicated in both VID registers
-		 */
-		if ((sd->vpbe_type == VPBE_VERSION_2) &&
-				(lconfig->pixfmt == PIXFMT_NV12)) {
-			/* other window also */
-			if (lconfig->interlaced) {
-				winmd_mask |= OSD_VIDWINMD_VFF1;
-				winmd |= OSD_VIDWINMD_VFF1;
-				osd_modify(sd, winmd_mask, winmd,
-					  OSD_VIDWINMD);
-			}
-
-			osd_modify(sd, OSD_MISCCTL_S420D,
-				    OSD_MISCCTL_S420D, OSD_MISCCTL);
-			osd_write(sd, lconfig->line_length >> 5,
-				  OSD_VIDWIN1OFST);
-			osd_write(sd, lconfig->xpos, OSD_VIDWIN1XP);
-			osd_write(sd, lconfig->xsize, OSD_VIDWIN1XL);
-			/*
-			  * if NV21 pixfmt and line length not 32B
-			  * aligned (e.g. NTSC), Need to set window
-			  * X pixel size to be 32B aligned as well
-			  */
-			if (lconfig->xsize % 32) {
-				osd_write(sd,
-					  ((lconfig->xsize + 31) & ~31),
-					  OSD_VIDWIN1XL);
-				osd_write(sd,
-					  ((lconfig->xsize + 31) & ~31),
-					  OSD_VIDWIN0XL);
-			}
-		} else if ((sd->vpbe_type == VPBE_VERSION_2) &&
-				(lconfig->pixfmt != PIXFMT_NV12)) {
-			osd_modify(sd, OSD_MISCCTL_S420D, ~OSD_MISCCTL_S420D,
-						OSD_MISCCTL);
-		}
-
-		if (lconfig->interlaced) {
-			osd_write(sd, lconfig->ypos >> 1, OSD_VIDWIN0YP);
-			osd_write(sd, lconfig->ysize >> 1, OSD_VIDWIN0YL);
-			if ((sd->vpbe_type == VPBE_VERSION_2) &&
-				lconfig->pixfmt == PIXFMT_NV12) {
-				osd_write(sd, lconfig->ypos >> 1,
-					  OSD_VIDWIN1YP);
-				osd_write(sd, lconfig->ysize >> 1,
-					  OSD_VIDWIN1YL);
-			}
-		} else {
-			osd_write(sd, lconfig->ypos, OSD_VIDWIN0YP);
-			osd_write(sd, lconfig->ysize, OSD_VIDWIN0YL);
-			if ((sd->vpbe_type == VPBE_VERSION_2) &&
-				lconfig->pixfmt == PIXFMT_NV12) {
-				osd_write(sd, lconfig->ypos, OSD_VIDWIN1YP);
-				osd_write(sd, lconfig->ysize, OSD_VIDWIN1YL);
-			}
-		}
-		break;
-	case WIN_OSD1:
-		/*
-		 * The caller must ensure that OSD1 is disabled prior to
-		 * switching from a normal mode to attribute mode or from
-		 * attribute mode to a normal mode.
-		 */
-		if (lconfig->pixfmt == PIXFMT_OSD_ATTR) {
-			if (sd->vpbe_type == VPBE_VERSION_1) {
-				winmd_mask |= OSD_OSDWIN1MD_ATN1E |
-				OSD_OSDWIN1MD_RGB1E | OSD_OSDWIN1MD_CLUTS1 |
-				OSD_OSDWIN1MD_BLND1 | OSD_OSDWIN1MD_TE1;
-			} else {
-				winmd_mask |= OSD_OSDWIN1MD_BMP1MD |
-				OSD_OSDWIN1MD_CLUTS1 | OSD_OSDWIN1MD_BLND1 |
-				OSD_OSDWIN1MD_TE1;
-			}
-		} else {
-			if (sd->vpbe_type == VPBE_VERSION_1) {
-				winmd_mask |= OSD_OSDWIN1MD_RGB1E;
-				if (lconfig->pixfmt == PIXFMT_RGB565)
-					winmd |= OSD_OSDWIN1MD_RGB1E;
-			} else if ((sd->vpbe_type == VPBE_VERSION_3)
-				   || (sd->vpbe_type == VPBE_VERSION_2)) {
-				winmd_mask |= OSD_OSDWIN1MD_BMP1MD;
-				switch (lconfig->pixfmt) {
-				case PIXFMT_RGB565:
-					winmd |=
-					    (1 << OSD_OSDWIN1MD_BMP1MD_SHIFT);
-					break;
-				case PIXFMT_RGB888:
-					winmd |=
-					    (2 << OSD_OSDWIN1MD_BMP1MD_SHIFT);
-					_osd_enable_rgb888_pixblend(sd,
-							OSDWIN_OSD1);
-					break;
-				case PIXFMT_YCbCrI:
-				case PIXFMT_YCrCbI:
-					winmd |=
-					    (3 << OSD_OSDWIN1MD_BMP1MD_SHIFT);
-					break;
-				default:
-					break;
-				}
-			}
-
-			winmd_mask |= OSD_OSDWIN1MD_BMW1;
-			switch (lconfig->pixfmt) {
-			case PIXFMT_1BPP:
-				bmw = 0;
-				break;
-			case PIXFMT_2BPP:
-				bmw = 1;
-				break;
-			case PIXFMT_4BPP:
-				bmw = 2;
-				break;
-			case PIXFMT_8BPP:
-				bmw = 3;
-				break;
-			default:
-				break;
-			}
-			winmd |= (bmw << OSD_OSDWIN1MD_BMW1_SHIFT);
-		}
-
-		winmd_mask |= OSD_OSDWIN1MD_OFF1;
-		if (lconfig->interlaced)
-			winmd |= OSD_OSDWIN1MD_OFF1;
-
-		osd_modify(sd, winmd_mask, winmd, OSD_OSDWIN1MD);
-		osd_write(sd, lconfig->line_length >> 5, OSD_OSDWIN1OFST);
-		osd_write(sd, lconfig->xpos, OSD_OSDWIN1XP);
-		osd_write(sd, lconfig->xsize, OSD_OSDWIN1XL);
-		if (lconfig->interlaced) {
-			osd_write(sd, lconfig->ypos >> 1, OSD_OSDWIN1YP);
-			osd_write(sd, lconfig->ysize >> 1, OSD_OSDWIN1YL);
-		} else {
-			osd_write(sd, lconfig->ypos, OSD_OSDWIN1YP);
-			osd_write(sd, lconfig->ysize, OSD_OSDWIN1YL);
-		}
-		break;
-	case WIN_VID1:
-		winmd_mask |= OSD_VIDWINMD_VFF1;
-		if (lconfig->interlaced)
-			winmd |= OSD_VIDWINMD_VFF1;
-
-		osd_modify(sd, winmd_mask, winmd, OSD_VIDWINMD);
-		osd_write(sd, lconfig->line_length >> 5, OSD_VIDWIN1OFST);
-		osd_write(sd, lconfig->xpos, OSD_VIDWIN1XP);
-		osd_write(sd, lconfig->xsize, OSD_VIDWIN1XL);
-		/*
-		 * For YUV420P format the register contents are
-		 * duplicated in both VID registers
-		 */
-		if (sd->vpbe_type == VPBE_VERSION_2) {
-			if (lconfig->pixfmt == PIXFMT_NV12) {
-				/* other window also */
-				if (lconfig->interlaced) {
-					winmd_mask |= OSD_VIDWINMD_VFF0;
-					winmd |= OSD_VIDWINMD_VFF0;
-					osd_modify(sd, winmd_mask, winmd,
-						  OSD_VIDWINMD);
-				}
-				osd_modify(sd, OSD_MISCCTL_S420D,
-					   OSD_MISCCTL_S420D, OSD_MISCCTL);
-				osd_write(sd, lconfig->line_length >> 5,
-					  OSD_VIDWIN0OFST);
-				osd_write(sd, lconfig->xpos, OSD_VIDWIN0XP);
-				osd_write(sd, lconfig->xsize, OSD_VIDWIN0XL);
-			} else {
-				osd_modify(sd, OSD_MISCCTL_S420D,
-					   ~OSD_MISCCTL_S420D, OSD_MISCCTL);
-			}
-		}
-
-		if (lconfig->interlaced) {
-			osd_write(sd, lconfig->ypos >> 1, OSD_VIDWIN1YP);
-			osd_write(sd, lconfig->ysize >> 1, OSD_VIDWIN1YL);
-			if ((sd->vpbe_type == VPBE_VERSION_2) &&
-				lconfig->pixfmt == PIXFMT_NV12) {
-				osd_write(sd, lconfig->ypos >> 1,
-					  OSD_VIDWIN0YP);
-				osd_write(sd, lconfig->ysize >> 1,
-					  OSD_VIDWIN0YL);
-			}
-		} else {
-			osd_write(sd, lconfig->ypos, OSD_VIDWIN1YP);
-			osd_write(sd, lconfig->ysize, OSD_VIDWIN1YL);
-			if ((sd->vpbe_type == VPBE_VERSION_2) &&
-				lconfig->pixfmt == PIXFMT_NV12) {
-				osd_write(sd, lconfig->ypos, OSD_VIDWIN0YP);
-				osd_write(sd, lconfig->ysize, OSD_VIDWIN0YL);
-			}
-		}
-		break;
-	}
-}
-
-static int osd_set_layer_config(struct osd_state *sd, enum osd_layer layer,
-				struct osd_layer_config *lconfig)
-{
-	struct osd_state *osd = sd;
-	struct osd_window_state *win = &osd->win[layer];
-	struct osd_layer_config *cfg = &win->lconfig;
-	unsigned long flags;
-	int reject_config;
-
-	spin_lock_irqsave(&osd->lock, flags);
-
-	reject_config = try_layer_config(sd, layer, lconfig);
-	if (reject_config) {
-		spin_unlock_irqrestore(&osd->lock, flags);
-		return reject_config;
-	}
-
-	/* update the current Cb/Cr order */
-	if (is_yc_pixfmt(lconfig->pixfmt))
-		osd->yc_pixfmt = lconfig->pixfmt;
-
-	/*
-	 * If we are switching OSD1 from normal mode to attribute mode or from
-	 * attribute mode to normal mode, then we must disable the window.
-	 */
-	if (layer == WIN_OSD1) {
-		if (((lconfig->pixfmt == PIXFMT_OSD_ATTR) &&
-		  (cfg->pixfmt != PIXFMT_OSD_ATTR)) ||
-		  ((lconfig->pixfmt != PIXFMT_OSD_ATTR) &&
-		  (cfg->pixfmt == PIXFMT_OSD_ATTR))) {
-			win->is_enabled = 0;
-			_osd_disable_layer(sd, layer);
-		}
-	}
-
-	_osd_set_layer_config(sd, layer, lconfig);
-
-	if (layer == WIN_OSD1) {
-		struct osd_osdwin_state *osdwin_state =
-		    &osd->osdwin[OSDWIN_OSD1];
-
-		if ((lconfig->pixfmt != PIXFMT_OSD_ATTR) &&
-		  (cfg->pixfmt == PIXFMT_OSD_ATTR)) {
-			/*
-			 * We just switched OSD1 from attribute mode to normal
-			 * mode, so we must initialize the CLUT select, the
-			 * blend factor, transparency colorkey enable, and
-			 * attenuation enable (DM6446 only) bits in the
-			 * OSDWIN1MD register.
-			 */
-			_osd_set_osd_clut(sd, OSDWIN_OSD1,
-						   osdwin_state->clut);
-			_osd_set_blending_factor(sd, OSDWIN_OSD1,
-							  osdwin_state->blend);
-			if (osdwin_state->colorkey_blending) {
-				_osd_enable_color_key(sd, OSDWIN_OSD1,
-							       osdwin_state->
-							       colorkey,
-							       lconfig->pixfmt);
-			} else
-				_osd_disable_color_key(sd, OSDWIN_OSD1);
-			_osd_set_rec601_attenuation(sd, OSDWIN_OSD1,
-						    osdwin_state->
-						    rec601_attenuation);
-		} else if ((lconfig->pixfmt == PIXFMT_OSD_ATTR) &&
-		  (cfg->pixfmt != PIXFMT_OSD_ATTR)) {
-			/*
-			 * We just switched OSD1 from normal mode to attribute
-			 * mode, so we must initialize the blink enable and
-			 * blink interval bits in the OSDATRMD register.
-			 */
-			_osd_set_blink_attribute(sd, osd->is_blinking,
-							  osd->blink);
-		}
-	}
-
-	/*
-	 * If we just switched to a 1-, 2-, or 4-bits-per-pixel bitmap format
-	 * then configure a default palette map.
-	 */
-	if ((lconfig->pixfmt != cfg->pixfmt) &&
-	  ((lconfig->pixfmt == PIXFMT_1BPP) ||
-	  (lconfig->pixfmt == PIXFMT_2BPP) ||
-	  (lconfig->pixfmt == PIXFMT_4BPP))) {
-		enum osd_win_layer osdwin =
-		    ((layer == WIN_OSD0) ? OSDWIN_OSD0 : OSDWIN_OSD1);
-		struct osd_osdwin_state *osdwin_state =
-		    &osd->osdwin[osdwin];
-		unsigned char clut_index;
-		unsigned char clut_entries = 0;
-
-		switch (lconfig->pixfmt) {
-		case PIXFMT_1BPP:
-			clut_entries = 2;
-			break;
-		case PIXFMT_2BPP:
-			clut_entries = 4;
-			break;
-		case PIXFMT_4BPP:
-			clut_entries = 16;
-			break;
-		default:
-			break;
-		}
-		/*
-		 * The default palette map maps the pixel value to the clut
-		 * index, i.e. pixel value 0 maps to clut entry 0, pixel value
-		 * 1 maps to clut entry 1, etc.
-		 */
-		for (clut_index = 0; clut_index < 16; clut_index++) {
-			osdwin_state->palette_map[clut_index] = clut_index;
-			if (clut_index < clut_entries) {
-				_osd_set_palette_map(sd, osdwin, clut_index,
-						     clut_index,
-						     lconfig->pixfmt);
-			}
-		}
-	}
-
-	*cfg = *lconfig;
-	/* DM6446: configure the RGB888 enable and window selection */
-	if (osd->win[WIN_VID0].lconfig.pixfmt == PIXFMT_RGB888)
-		_osd_enable_vid_rgb888(sd, WIN_VID0);
-	else if (osd->win[WIN_VID1].lconfig.pixfmt == PIXFMT_RGB888)
-		_osd_enable_vid_rgb888(sd, WIN_VID1);
-	else
-		_osd_disable_vid_rgb888(sd);
-
-	if (layer == WIN_VID0) {
-		osd->pingpong =
-		    _osd_dm6446_vid0_pingpong(sd, osd->field_inversion,
-						       win->fb_base_phys,
-						       cfg);
-	}
-
-	spin_unlock_irqrestore(&osd->lock, flags);
-
-	return 0;
-}
-
-static void osd_init_layer(struct osd_state *sd, enum osd_layer layer)
-{
-	struct osd_state *osd = sd;
-	struct osd_window_state *win = &osd->win[layer];
-	enum osd_win_layer osdwin;
-	struct osd_osdwin_state *osdwin_state;
-	struct osd_layer_config *cfg = &win->lconfig;
-	unsigned long flags;
-
-	spin_lock_irqsave(&osd->lock, flags);
-
-	win->is_enabled = 0;
-	_osd_disable_layer(sd, layer);
-
-	win->h_zoom = ZOOM_X1;
-	win->v_zoom = ZOOM_X1;
-	_osd_set_zoom(sd, layer, win->h_zoom, win->v_zoom);
-
-	win->fb_base_phys = 0;
-	_osd_start_layer(sd, layer, win->fb_base_phys, 0);
-
-	cfg->line_length = 0;
-	cfg->xsize = 0;
-	cfg->ysize = 0;
-	cfg->xpos = 0;
-	cfg->ypos = 0;
-	cfg->interlaced = 0;
-	switch (layer) {
-	case WIN_OSD0:
-	case WIN_OSD1:
-		osdwin = (layer == WIN_OSD0) ? OSDWIN_OSD0 : OSDWIN_OSD1;
-		osdwin_state = &osd->osdwin[osdwin];
-		/*
-		 * Other code relies on the fact that OSD windows default to a
-		 * bitmap pixel format when they are deallocated, so don't
-		 * change this default pixel format.
-		 */
-		cfg->pixfmt = PIXFMT_8BPP;
-		_osd_set_layer_config(sd, layer, cfg);
-		osdwin_state->clut = RAM_CLUT;
-		_osd_set_osd_clut(sd, osdwin, osdwin_state->clut);
-		osdwin_state->colorkey_blending = 0;
-		_osd_disable_color_key(sd, osdwin);
-		osdwin_state->blend = OSD_8_VID_0;
-		_osd_set_blending_factor(sd, osdwin, osdwin_state->blend);
-		osdwin_state->rec601_attenuation = 0;
-		_osd_set_rec601_attenuation(sd, osdwin,
-						     osdwin_state->
-						     rec601_attenuation);
-		if (osdwin == OSDWIN_OSD1) {
-			osd->is_blinking = 0;
-			osd->blink = BLINK_X1;
-		}
-		break;
-	case WIN_VID0:
-	case WIN_VID1:
-		cfg->pixfmt = osd->yc_pixfmt;
-		_osd_set_layer_config(sd, layer, cfg);
-		break;
-	}
-
-	spin_unlock_irqrestore(&osd->lock, flags);
-}
-
-static void osd_release_layer(struct osd_state *sd, enum osd_layer layer)
-{
-	struct osd_state *osd = sd;
-	struct osd_window_state *win = &osd->win[layer];
-	unsigned long flags;
-
-	spin_lock_irqsave(&osd->lock, flags);
-
-	if (!win->is_allocated) {
-		spin_unlock_irqrestore(&osd->lock, flags);
-		return;
-	}
-
-	spin_unlock_irqrestore(&osd->lock, flags);
-	osd_init_layer(sd, layer);
-	spin_lock_irqsave(&osd->lock, flags);
-
-	win->is_allocated = 0;
-
-	spin_unlock_irqrestore(&osd->lock, flags);
-}
-
-static int osd_request_layer(struct osd_state *sd, enum osd_layer layer)
-{
-	struct osd_state *osd = sd;
-	struct osd_window_state *win = &osd->win[layer];
-	unsigned long flags;
-
-	spin_lock_irqsave(&osd->lock, flags);
-
-	if (win->is_allocated) {
-		spin_unlock_irqrestore(&osd->lock, flags);
-		return -1;
-	}
-	win->is_allocated = 1;
-
-	spin_unlock_irqrestore(&osd->lock, flags);
-
-	return 0;
-}
-
-static void _osd_init(struct osd_state *sd)
-{
-	osd_write(sd, 0, OSD_MODE);
-	osd_write(sd, 0, OSD_VIDWINMD);
-	osd_write(sd, 0, OSD_OSDWIN0MD);
-	osd_write(sd, 0, OSD_OSDWIN1MD);
-	osd_write(sd, 0, OSD_RECTCUR);
-	osd_write(sd, 0, OSD_MISCCTL);
-	if (sd->vpbe_type == VPBE_VERSION_3) {
-		osd_write(sd, 0, OSD_VBNDRY);
-		osd_write(sd, 0, OSD_EXTMODE);
-		osd_write(sd, OSD_MISCCTL_DMANG, OSD_MISCCTL);
-	}
-}
-
-static void osd_set_left_margin(struct osd_state *sd, u32 val)
-{
-	osd_write(sd, val, OSD_BASEPX);
-}
-
-static void osd_set_top_margin(struct osd_state *sd, u32 val)
-{
-	osd_write(sd, val, OSD_BASEPY);
-}
-
-static int osd_initialize(struct osd_state *osd)
-{
-	if (osd == NULL)
-		return -ENODEV;
-	_osd_init(osd);
-
-	/* set default Cb/Cr order */
-	osd->yc_pixfmt = PIXFMT_YCbCrI;
-
-	if (osd->vpbe_type == VPBE_VERSION_3) {
-		/*
-		 * ROM CLUT1 on the DM355 is similar (identical?) to ROM CLUT0
-		 * on the DM6446, so make ROM_CLUT1 the default on the DM355.
-		 */
-		osd->rom_clut = ROM_CLUT1;
-	}
-
-	_osd_set_field_inversion(osd, osd->field_inversion);
-	_osd_set_rom_clut(osd, osd->rom_clut);
-
-	osd_init_layer(osd, WIN_OSD0);
-	osd_init_layer(osd, WIN_VID0);
-	osd_init_layer(osd, WIN_OSD1);
-	osd_init_layer(osd, WIN_VID1);
-
-	return 0;
-}
-
-static const struct vpbe_osd_ops osd_ops = {
-	.initialize = osd_initialize,
-	.request_layer = osd_request_layer,
-	.release_layer = osd_release_layer,
-	.enable_layer = osd_enable_layer,
-	.disable_layer = osd_disable_layer,
-	.set_layer_config = osd_set_layer_config,
-	.get_layer_config = osd_get_layer_config,
-	.start_layer = osd_start_layer,
-	.set_left_margin = osd_set_left_margin,
-	.set_top_margin = osd_set_top_margin,
-};
-
-static int osd_probe(struct platform_device *pdev)
-{
-	struct osd_platform_data *pdata;
-	struct osd_state *osd;
-	struct resource *res;
-	int ret = 0;
-
-	osd = kzalloc(sizeof(struct osd_state), GFP_KERNEL);
-	if (osd == NULL)
-		return -ENOMEM;
-
-	osd->dev = &pdev->dev;
-	pdata = (struct osd_platform_data *)pdev->dev.platform_data;
-	osd->vpbe_type = (enum vpbe_version)pdata->vpbe_type;
-	if (NULL == pdev->dev.platform_data) {
-		dev_err(osd->dev, "No platform data defined for OSD"
-			" sub device\n");
-		ret = -ENOENT;
-		goto free_mem;
-	}
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!res) {
-		dev_err(osd->dev, "Unable to get OSD register address map\n");
-		ret = -ENODEV;
-		goto free_mem;
-	}
-	osd->osd_base_phys = res->start;
-	osd->osd_size = resource_size(res);
-	if (!request_mem_region(osd->osd_base_phys, osd->osd_size,
-				MODULE_NAME)) {
-		dev_err(osd->dev, "Unable to reserve OSD MMIO region\n");
-		ret = -ENODEV;
-		goto free_mem;
-	}
-	osd->osd_base = (unsigned long)ioremap_nocache(res->start,
-							osd->osd_size);
-	if (!osd->osd_base) {
-		dev_err(osd->dev, "Unable to map the OSD region\n");
-		ret = -ENODEV;
-		goto release_mem_region;
-	}
-	spin_lock_init(&osd->lock);
-	osd->ops = osd_ops;
-	platform_set_drvdata(pdev, osd);
-	dev_notice(osd->dev, "OSD sub device probe success\n");
-	return ret;
-
-release_mem_region:
-	release_mem_region(osd->osd_base_phys, osd->osd_size);
-free_mem:
-	kfree(osd);
-	return ret;
-}
-
-static int osd_remove(struct platform_device *pdev)
-{
-	struct osd_state *osd = platform_get_drvdata(pdev);
-
-	iounmap((void *)osd->osd_base);
-	release_mem_region(osd->osd_base_phys, osd->osd_size);
-	kfree(osd);
-	return 0;
-}
-
-static struct platform_driver osd_driver = {
-	.probe		= osd_probe,
-	.remove		= osd_remove,
-	.driver		= {
-		.name	= MODULE_NAME,
-		.owner	= THIS_MODULE,
-	},
-};
-
-module_platform_driver(osd_driver);
-
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("DaVinci OSD Manager Driver");
-MODULE_AUTHOR("Texas Instruments");
diff --git a/drivers/media/video/davinci/vpbe_osd_regs.h b/drivers/media/video/davinci/vpbe_osd_regs.h
deleted file mode 100644
index 584520f3af6..00000000000
--- a/drivers/media/video/davinci/vpbe_osd_regs.h
+++ /dev/null
@@ -1,364 +0,0 @@
-/*
- * Copyright (C) 2006-2010 Texas Instruments Inc
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation version 2.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef _VPBE_OSD_REGS_H
-#define _VPBE_OSD_REGS_H
-
-/* VPBE Global Registers */
-#define VPBE_PID				0x0
-#define VPBE_PCR				0x4
-
-/* VPSS CLock Registers */
-#define VPSSCLK_PID				0x00
-#define VPSSCLK_CLKCTRL				0x04
-
-/* VPSS Buffer Logic Registers */
-#define VPSSBL_PID				0x00
-#define VPSSBL_PCR				0x04
-#define VPSSBL_BCR				0x08
-#define VPSSBL_INTSTAT				0x0C
-#define VPSSBL_INTSEL				0x10
-#define VPSSBL_EVTSEL				0x14
-#define VPSSBL_MEMCTRL				0x18
-#define VPSSBL_CCDCMUX				0x1C
-
-/* DM365 ISP5 system configuration */
-#define ISP5_PID				0x0
-#define ISP5_PCCR				0x4
-#define ISP5_BCR				0x8
-#define ISP5_INTSTAT				0xC
-#define ISP5_INTSEL1				0x10
-#define ISP5_INTSEL2				0x14
-#define ISP5_INTSEL3				0x18
-#define ISP5_EVTSEL				0x1c
-#define ISP5_CCDCMUX				0x20
-
-/* VPBE On-Screen Display Subsystem Registers (OSD) */
-#define OSD_MODE				0x00
-#define OSD_VIDWINMD				0x04
-#define OSD_OSDWIN0MD				0x08
-#define OSD_OSDWIN1MD				0x0C
-#define OSD_OSDATRMD				0x0C
-#define OSD_RECTCUR				0x10
-#define OSD_VIDWIN0OFST				0x18
-#define OSD_VIDWIN1OFST				0x1C
-#define OSD_OSDWIN0OFST				0x20
-#define OSD_OSDWIN1OFST				0x24
-#define OSD_VIDWINADH				0x28
-#define OSD_VIDWIN0ADL				0x2C
-#define OSD_VIDWIN0ADR				0x2C
-#define OSD_VIDWIN1ADL				0x30
-#define OSD_VIDWIN1ADR				0x30
-#define OSD_OSDWINADH				0x34
-#define OSD_OSDWIN0ADL				0x38
-#define OSD_OSDWIN0ADR				0x38
-#define OSD_OSDWIN1ADL				0x3C
-#define OSD_OSDWIN1ADR				0x3C
-#define OSD_BASEPX				0x40
-#define OSD_BASEPY				0x44
-#define OSD_VIDWIN0XP				0x48
-#define OSD_VIDWIN0YP				0x4C
-#define OSD_VIDWIN0XL				0x50
-#define OSD_VIDWIN0YL				0x54
-#define OSD_VIDWIN1XP				0x58
-#define OSD_VIDWIN1YP				0x5C
-#define OSD_VIDWIN1XL				0x60
-#define OSD_VIDWIN1YL				0x64
-#define OSD_OSDWIN0XP				0x68
-#define OSD_OSDWIN0YP				0x6C
-#define OSD_OSDWIN0XL				0x70
-#define OSD_OSDWIN0YL				0x74
-#define OSD_OSDWIN1XP				0x78
-#define OSD_OSDWIN1YP				0x7C
-#define OSD_OSDWIN1XL				0x80
-#define OSD_OSDWIN1YL				0x84
-#define OSD_CURXP				0x88
-#define OSD_CURYP				0x8C
-#define OSD_CURXL				0x90
-#define OSD_CURYL				0x94
-#define OSD_W0BMP01				0xA0
-#define OSD_W0BMP23				0xA4
-#define OSD_W0BMP45				0xA8
-#define OSD_W0BMP67				0xAC
-#define OSD_W0BMP89				0xB0
-#define OSD_W0BMPAB				0xB4
-#define OSD_W0BMPCD				0xB8
-#define OSD_W0BMPEF				0xBC
-#define OSD_W1BMP01				0xC0
-#define OSD_W1BMP23				0xC4
-#define OSD_W1BMP45				0xC8
-#define OSD_W1BMP67				0xCC
-#define OSD_W1BMP89				0xD0
-#define OSD_W1BMPAB				0xD4
-#define OSD_W1BMPCD				0xD8
-#define OSD_W1BMPEF				0xDC
-#define OSD_VBNDRY				0xE0
-#define OSD_EXTMODE				0xE4
-#define OSD_MISCCTL				0xE8
-#define OSD_CLUTRAMYCB				0xEC
-#define OSD_CLUTRAMCR				0xF0
-#define OSD_TRANSPVAL				0xF4
-#define OSD_TRANSPVALL				0xF4
-#define OSD_TRANSPVALU				0xF8
-#define OSD_TRANSPBMPIDX			0xFC
-#define OSD_PPVWIN0ADR				0xFC
-
-/* bit definitions */
-#define VPBE_PCR_VENC_DIV			(1 << 1)
-#define VPBE_PCR_CLK_OFF			(1 << 0)
-
-#define VPSSBL_INTSTAT_HSSIINT			(1 << 14)
-#define VPSSBL_INTSTAT_CFALDINT			(1 << 13)
-#define VPSSBL_INTSTAT_IPIPE_INT5		(1 << 12)
-#define VPSSBL_INTSTAT_IPIPE_INT4		(1 << 11)
-#define VPSSBL_INTSTAT_IPIPE_INT3		(1 << 10)
-#define VPSSBL_INTSTAT_IPIPE_INT2		(1 << 9)
-#define VPSSBL_INTSTAT_IPIPE_INT1		(1 << 8)
-#define VPSSBL_INTSTAT_IPIPE_INT0		(1 << 7)
-#define VPSSBL_INTSTAT_IPIPEIFINT		(1 << 6)
-#define VPSSBL_INTSTAT_OSDINT			(1 << 5)
-#define VPSSBL_INTSTAT_VENCINT			(1 << 4)
-#define VPSSBL_INTSTAT_H3AINT			(1 << 3)
-#define VPSSBL_INTSTAT_CCDC_VDINT2		(1 << 2)
-#define VPSSBL_INTSTAT_CCDC_VDINT1		(1 << 1)
-#define VPSSBL_INTSTAT_CCDC_VDINT0		(1 << 0)
-
-/* DM365 ISP5 bit definitions */
-#define ISP5_INTSTAT_VENCINT			(1 << 21)
-#define ISP5_INTSTAT_OSDINT			(1 << 20)
-
-/* VMOD TVTYP options for HDMD=0 */
-#define SDTV_NTSC				0
-#define SDTV_PAL				1
-/* VMOD TVTYP options for HDMD=1 */
-#define HDTV_525P				0
-#define HDTV_625P				1
-#define HDTV_1080I				2
-#define HDTV_720P				3
-
-#define OSD_MODE_CS				(1 << 15)
-#define OSD_MODE_OVRSZ				(1 << 14)
-#define OSD_MODE_OHRSZ				(1 << 13)
-#define OSD_MODE_EF				(1 << 12)
-#define OSD_MODE_VVRSZ				(1 << 11)
-#define OSD_MODE_VHRSZ				(1 << 10)
-#define OSD_MODE_FSINV				(1 << 9)
-#define OSD_MODE_BCLUT				(1 << 8)
-#define OSD_MODE_CABG_SHIFT			0
-#define OSD_MODE_CABG				(0xff << 0)
-
-#define OSD_VIDWINMD_VFINV			(1 << 15)
-#define OSD_VIDWINMD_V1EFC			(1 << 14)
-#define OSD_VIDWINMD_VHZ1_SHIFT			12
-#define OSD_VIDWINMD_VHZ1			(3 << 12)
-#define OSD_VIDWINMD_VVZ1_SHIFT			10
-#define OSD_VIDWINMD_VVZ1			(3 << 10)
-#define OSD_VIDWINMD_VFF1			(1 << 9)
-#define OSD_VIDWINMD_ACT1			(1 << 8)
-#define OSD_VIDWINMD_V0EFC			(1 << 6)
-#define OSD_VIDWINMD_VHZ0_SHIFT			4
-#define OSD_VIDWINMD_VHZ0			(3 << 4)
-#define OSD_VIDWINMD_VVZ0_SHIFT			2
-#define OSD_VIDWINMD_VVZ0			(3 << 2)
-#define OSD_VIDWINMD_VFF0			(1 << 1)
-#define OSD_VIDWINMD_ACT0			(1 << 0)
-
-#define OSD_OSDWIN0MD_ATN0E			(1 << 14)
-#define OSD_OSDWIN0MD_RGB0E			(1 << 13)
-#define OSD_OSDWIN0MD_BMP0MD_SHIFT		13
-#define OSD_OSDWIN0MD_BMP0MD			(3 << 13)
-#define OSD_OSDWIN0MD_CLUTS0			(1 << 12)
-#define OSD_OSDWIN0MD_OHZ0_SHIFT		10
-#define OSD_OSDWIN0MD_OHZ0			(3 << 10)
-#define OSD_OSDWIN0MD_OVZ0_SHIFT		8
-#define OSD_OSDWIN0MD_OVZ0			(3 << 8)
-#define OSD_OSDWIN0MD_BMW0_SHIFT		6
-#define OSD_OSDWIN0MD_BMW0			(3 << 6)
-#define OSD_OSDWIN0MD_BLND0_SHIFT		3
-#define OSD_OSDWIN0MD_BLND0			(7 << 3)
-#define OSD_OSDWIN0MD_TE0			(1 << 2)
-#define OSD_OSDWIN0MD_OFF0			(1 << 1)
-#define OSD_OSDWIN0MD_OACT0			(1 << 0)
-
-#define OSD_OSDWIN1MD_OASW			(1 << 15)
-#define OSD_OSDWIN1MD_ATN1E			(1 << 14)
-#define OSD_OSDWIN1MD_RGB1E			(1 << 13)
-#define OSD_OSDWIN1MD_BMP1MD_SHIFT		13
-#define OSD_OSDWIN1MD_BMP1MD			(3 << 13)
-#define OSD_OSDWIN1MD_CLUTS1			(1 << 12)
-#define OSD_OSDWIN1MD_OHZ1_SHIFT		10
-#define OSD_OSDWIN1MD_OHZ1			(3 << 10)
-#define OSD_OSDWIN1MD_OVZ1_SHIFT		8
-#define OSD_OSDWIN1MD_OVZ1			(3 << 8)
-#define OSD_OSDWIN1MD_BMW1_SHIFT		6
-#define OSD_OSDWIN1MD_BMW1			(3 << 6)
-#define OSD_OSDWIN1MD_BLND1_SHIFT		3
-#define OSD_OSDWIN1MD_BLND1			(7 << 3)
-#define OSD_OSDWIN1MD_TE1			(1 << 2)
-#define OSD_OSDWIN1MD_OFF1			(1 << 1)
-#define OSD_OSDWIN1MD_OACT1			(1 << 0)
-
-#define OSD_OSDATRMD_OASW			(1 << 15)
-#define OSD_OSDATRMD_OHZA_SHIFT			10
-#define OSD_OSDATRMD_OHZA			(3 << 10)
-#define OSD_OSDATRMD_OVZA_SHIFT			8
-#define OSD_OSDATRMD_OVZA			(3 << 8)
-#define OSD_OSDATRMD_BLNKINT_SHIFT		6
-#define OSD_OSDATRMD_BLNKINT			(3 << 6)
-#define OSD_OSDATRMD_OFFA			(1 << 1)
-#define OSD_OSDATRMD_BLNK			(1 << 0)
-
-#define OSD_RECTCUR_RCAD_SHIFT			8
-#define OSD_RECTCUR_RCAD			(0xff << 8)
-#define OSD_RECTCUR_CLUTSR			(1 << 7)
-#define OSD_RECTCUR_RCHW_SHIFT			4
-#define OSD_RECTCUR_RCHW			(7 << 4)
-#define OSD_RECTCUR_RCVW_SHIFT			1
-#define OSD_RECTCUR_RCVW			(7 << 1)
-#define OSD_RECTCUR_RCACT			(1 << 0)
-
-#define OSD_VIDWIN0OFST_V0LO			(0x1ff << 0)
-
-#define OSD_VIDWIN1OFST_V1LO			(0x1ff << 0)
-
-#define OSD_OSDWIN0OFST_O0LO			(0x1ff << 0)
-
-#define OSD_OSDWIN1OFST_O1LO			(0x1ff << 0)
-
-#define OSD_WINOFST_AH_SHIFT			9
-
-#define OSD_VIDWIN0OFST_V0AH			(0xf << 9)
-#define OSD_VIDWIN1OFST_V1AH			(0xf << 9)
-#define OSD_OSDWIN0OFST_O0AH			(0xf << 9)
-#define OSD_OSDWIN1OFST_O1AH			(0xf << 9)
-
-#define OSD_VIDWINADH_V1AH_SHIFT		8
-#define OSD_VIDWINADH_V1AH			(0x7f << 8)
-#define OSD_VIDWINADH_V0AH_SHIFT		0
-#define OSD_VIDWINADH_V0AH			(0x7f << 0)
-
-#define OSD_VIDWIN0ADL_V0AL			(0xffff << 0)
-
-#define OSD_VIDWIN1ADL_V1AL			(0xffff << 0)
-
-#define OSD_OSDWINADH_O1AH_SHIFT		8
-#define OSD_OSDWINADH_O1AH			(0x7f << 8)
-#define OSD_OSDWINADH_O0AH_SHIFT		0
-#define OSD_OSDWINADH_O0AH			(0x7f << 0)
-
-#define OSD_OSDWIN0ADL_O0AL			(0xffff << 0)
-
-#define OSD_OSDWIN1ADL_O1AL			(0xffff << 0)
-
-#define OSD_BASEPX_BPX				(0x3ff << 0)
-
-#define OSD_BASEPY_BPY				(0x1ff << 0)
-
-#define OSD_VIDWIN0XP_V0X			(0x7ff << 0)
-
-#define OSD_VIDWIN0YP_V0Y			(0x7ff << 0)
-
-#define OSD_VIDWIN0XL_V0W			(0x7ff << 0)
-
-#define OSD_VIDWIN0YL_V0H			(0x7ff << 0)
-
-#define OSD_VIDWIN1XP_V1X			(0x7ff << 0)
-
-#define OSD_VIDWIN1YP_V1Y			(0x7ff << 0)
-
-#define OSD_VIDWIN1XL_V1W			(0x7ff << 0)
-
-#define OSD_VIDWIN1YL_V1H			(0x7ff << 0)
-
-#define OSD_OSDWIN0XP_W0X			(0x7ff << 0)
-
-#define OSD_OSDWIN0YP_W0Y			(0x7ff << 0)
-
-#define OSD_OSDWIN0XL_W0W			(0x7ff << 0)
-
-#define OSD_OSDWIN0YL_W0H			(0x7ff << 0)
-
-#define OSD_OSDWIN1XP_W1X			(0x7ff << 0)
-
-#define OSD_OSDWIN1YP_W1Y			(0x7ff << 0)
-
-#define OSD_OSDWIN1XL_W1W			(0x7ff << 0)
-
-#define OSD_OSDWIN1YL_W1H			(0x7ff << 0)
-
-#define OSD_CURXP_RCSX				(0x7ff << 0)
-
-#define OSD_CURYP_RCSY				(0x7ff << 0)
-
-#define OSD_CURXL_RCSW				(0x7ff << 0)
-
-#define OSD_CURYL_RCSH				(0x7ff << 0)
-
-#define OSD_EXTMODE_EXPMDSEL			(1 << 15)
-#define OSD_EXTMODE_SCRNHEXP_SHIFT		13
-#define OSD_EXTMODE_SCRNHEXP			(3 << 13)
-#define OSD_EXTMODE_SCRNVEXP			(1 << 12)
-#define OSD_EXTMODE_OSD1BLDCHR			(1 << 11)
-#define OSD_EXTMODE_OSD0BLDCHR			(1 << 10)
-#define OSD_EXTMODE_ATNOSD1EN			(1 << 9)
-#define OSD_EXTMODE_ATNOSD0EN			(1 << 8)
-#define OSD_EXTMODE_OSDHRSZ15			(1 << 7)
-#define OSD_EXTMODE_VIDHRSZ15			(1 << 6)
-#define OSD_EXTMODE_ZMFILV1HEN			(1 << 5)
-#define OSD_EXTMODE_ZMFILV1VEN			(1 << 4)
-#define OSD_EXTMODE_ZMFILV0HEN			(1 << 3)
-#define OSD_EXTMODE_ZMFILV0VEN			(1 << 2)
-#define OSD_EXTMODE_EXPFILHEN			(1 << 1)
-#define OSD_EXTMODE_EXPFILVEN			(1 << 0)
-
-#define OSD_MISCCTL_BLDSEL			(1 << 15)
-#define OSD_MISCCTL_S420D			(1 << 14)
-#define OSD_MISCCTL_BMAPT			(1 << 13)
-#define OSD_MISCCTL_DM365M			(1 << 12)
-#define OSD_MISCCTL_RGBEN			(1 << 7)
-#define OSD_MISCCTL_RGBWIN			(1 << 6)
-#define OSD_MISCCTL_DMANG			(1 << 6)
-#define OSD_MISCCTL_TMON			(1 << 5)
-#define OSD_MISCCTL_RSEL			(1 << 4)
-#define OSD_MISCCTL_CPBSY			(1 << 3)
-#define OSD_MISCCTL_PPSW			(1 << 2)
-#define OSD_MISCCTL_PPRV			(1 << 1)
-
-#define OSD_CLUTRAMYCB_Y_SHIFT			8
-#define OSD_CLUTRAMYCB_Y			(0xff << 8)
-#define OSD_CLUTRAMYCB_CB_SHIFT			0
-#define OSD_CLUTRAMYCB_CB			(0xff << 0)
-
-#define OSD_CLUTRAMCR_CR_SHIFT			8
-#define OSD_CLUTRAMCR_CR			(0xff << 8)
-#define OSD_CLUTRAMCR_CADDR_SHIFT		0
-#define OSD_CLUTRAMCR_CADDR			(0xff << 0)
-
-#define OSD_TRANSPVAL_RGBTRANS			(0xffff << 0)
-
-#define OSD_TRANSPVALL_RGBL			(0xffff << 0)
-
-#define OSD_TRANSPVALU_Y_SHIFT			8
-#define OSD_TRANSPVALU_Y			(0xff << 8)
-#define OSD_TRANSPVALU_RGBU_SHIFT		0
-#define OSD_TRANSPVALU_RGBU			(0xff << 0)
-
-#define OSD_TRANSPBMPIDX_BMP1_SHIFT		8
-#define OSD_TRANSPBMPIDX_BMP1			(0xff << 8)
-#define OSD_TRANSPBMPIDX_BMP0_SHIFT		0
-#define OSD_TRANSPBMPIDX_BMP0			0xff
-
-#endif				/* _DAVINCI_VPBE_H_ */
diff --git a/drivers/media/video/davinci/vpbe_venc.c b/drivers/media/video/davinci/vpbe_venc.c
deleted file mode 100644
index b21ecc8d134..00000000000
--- a/drivers/media/video/davinci/vpbe_venc.c
+++ /dev/null
@@ -1,706 +0,0 @@
-/*
- * Copyright (C) 2010 Texas Instruments Inc
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation version 2.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/ctype.h>
-#include <linux/delay.h>
-#include <linux/device.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/videodev2.h>
-#include <linux/slab.h>
-
-#include <mach/hardware.h>
-#include <mach/mux.h>
-#include <mach/i2c.h>
-
-#include <linux/io.h>
-
-#include <media/davinci/vpbe_types.h>
-#include <media/davinci/vpbe_venc.h>
-#include <media/davinci/vpss.h>
-#include <media/v4l2-device.h>
-
-#include "vpbe_venc_regs.h"
-
-#define MODULE_NAME	VPBE_VENC_SUBDEV_NAME
-
-static int debug = 2;
-module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "Debug level 0-2");
-
-struct venc_state {
-	struct v4l2_subdev sd;
-	struct venc_callback *callback;
-	struct venc_platform_data *pdata;
-	struct device *pdev;
-	u32 output;
-	v4l2_std_id std;
-	spinlock_t lock;
-	void __iomem *venc_base;
-	void __iomem *vdaccfg_reg;
-};
-
-static inline struct venc_state *to_state(struct v4l2_subdev *sd)
-{
-	return container_of(sd, struct venc_state, sd);
-}
-
-static inline u32 venc_read(struct v4l2_subdev *sd, u32 offset)
-{
-	struct venc_state *venc = to_state(sd);
-
-	return readl(venc->venc_base + offset);
-}
-
-static inline u32 venc_write(struct v4l2_subdev *sd, u32 offset, u32 val)
-{
-	struct venc_state *venc = to_state(sd);
-
-	writel(val, (venc->venc_base + offset));
-
-	return val;
-}
-
-static inline u32 venc_modify(struct v4l2_subdev *sd, u32 offset,
-				 u32 val, u32 mask)
-{
-	u32 new_val = (venc_read(sd, offset) & ~mask) | (val & mask);
-
-	venc_write(sd, offset, new_val);
-
-	return new_val;
-}
-
-static inline u32 vdaccfg_write(struct v4l2_subdev *sd, u32 val)
-{
-	struct venc_state *venc = to_state(sd);
-
-	writel(val, venc->vdaccfg_reg);
-
-	val = readl(venc->vdaccfg_reg);
-
-	return val;
-}
-
-#define VDAC_COMPONENT	0x543
-#define VDAC_S_VIDEO	0x210
-/* This function sets the dac of the VPBE for various outputs
- */
-static int venc_set_dac(struct v4l2_subdev *sd, u32 out_index)
-{
-	switch (out_index) {
-	case 0:
-		v4l2_dbg(debug, 1, sd, "Setting output to Composite\n");
-		venc_write(sd, VENC_DACSEL, 0);
-		break;
-	case 1:
-		v4l2_dbg(debug, 1, sd, "Setting output to Component\n");
-		venc_write(sd, VENC_DACSEL, VDAC_COMPONENT);
-		break;
-	case 2:
-		v4l2_dbg(debug, 1, sd, "Setting output to S-video\n");
-		venc_write(sd, VENC_DACSEL, VDAC_S_VIDEO);
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static void venc_enabledigitaloutput(struct v4l2_subdev *sd, int benable)
-{
-	struct venc_state *venc = to_state(sd);
-	struct venc_platform_data *pdata = venc->pdata;
-	v4l2_dbg(debug, 2, sd, "venc_enabledigitaloutput\n");
-
-	if (benable) {
-		venc_write(sd, VENC_VMOD, 0);
-		venc_write(sd, VENC_CVBS, 0);
-		venc_write(sd, VENC_LCDOUT, 0);
-		venc_write(sd, VENC_HSPLS, 0);
-		venc_write(sd, VENC_HSTART, 0);
-		venc_write(sd, VENC_HVALID, 0);
-		venc_write(sd, VENC_HINT, 0);
-		venc_write(sd, VENC_VSPLS, 0);
-		venc_write(sd, VENC_VSTART, 0);
-		venc_write(sd, VENC_VVALID, 0);
-		venc_write(sd, VENC_VINT, 0);
-		venc_write(sd, VENC_YCCCTL, 0);
-		venc_write(sd, VENC_DACSEL, 0);
-
-	} else {
-		venc_write(sd, VENC_VMOD, 0);
-		/* disable VCLK output pin enable */
-		venc_write(sd, VENC_VIDCTL, 0x141);
-
-		/* Disable output sync pins */
-		venc_write(sd, VENC_SYNCCTL, 0);
-
-		/* Disable DCLOCK */
-		venc_write(sd, VENC_DCLKCTL, 0);
-		venc_write(sd, VENC_DRGBX1, 0x0000057C);
-
-		/* Disable LCD output control (accepting default polarity) */
-		venc_write(sd, VENC_LCDOUT, 0);
-		if (pdata->venc_type != VPBE_VERSION_3)
-			venc_write(sd, VENC_CMPNT, 0x100);
-		venc_write(sd, VENC_HSPLS, 0);
-		venc_write(sd, VENC_HINT, 0);
-		venc_write(sd, VENC_HSTART, 0);
-		venc_write(sd, VENC_HVALID, 0);
-
-		venc_write(sd, VENC_VSPLS, 0);
-		venc_write(sd, VENC_VINT, 0);
-		venc_write(sd, VENC_VSTART, 0);
-		venc_write(sd, VENC_VVALID, 0);
-
-		venc_write(sd, VENC_HSDLY, 0);
-		venc_write(sd, VENC_VSDLY, 0);
-
-		venc_write(sd, VENC_YCCCTL, 0);
-		venc_write(sd, VENC_VSTARTA, 0);
-
-		/* Set OSD clock and OSD Sync Adavance registers */
-		venc_write(sd, VENC_OSDCLK0, 1);
-		venc_write(sd, VENC_OSDCLK1, 2);
-	}
-}
-
-#define VDAC_CONFIG_SD_V3	0x0E21A6B6
-#define VDAC_CONFIG_SD_V2	0x081141CF
-/*
- * setting NTSC mode
- */
-static int venc_set_ntsc(struct v4l2_subdev *sd)
-{
-	u32 val;
-	struct venc_state *venc = to_state(sd);
-	struct venc_platform_data *pdata = venc->pdata;
-
-	v4l2_dbg(debug, 2, sd, "venc_set_ntsc\n");
-
-	/* Setup clock at VPSS & VENC for SD */
-	vpss_enable_clock(VPSS_VENC_CLOCK_SEL, 1);
-	if (pdata->setup_clock(VPBE_ENC_STD, V4L2_STD_525_60) < 0)
-		return -EINVAL;
-
-	venc_enabledigitaloutput(sd, 0);
-
-	if (pdata->venc_type == VPBE_VERSION_3) {
-		venc_write(sd, VENC_CLKCTL, 0x01);
-		venc_write(sd, VENC_VIDCTL, 0);
-		val = vdaccfg_write(sd, VDAC_CONFIG_SD_V3);
-	} else if (pdata->venc_type == VPBE_VERSION_2) {
-		venc_write(sd, VENC_CLKCTL, 0x01);
-		venc_write(sd, VENC_VIDCTL, 0);
-		vdaccfg_write(sd, VDAC_CONFIG_SD_V2);
-	} else {
-		/* to set VENC CLK DIV to 1 - final clock is 54 MHz */
-		venc_modify(sd, VENC_VIDCTL, 0, 1 << 1);
-		/* Set REC656 Mode */
-		venc_write(sd, VENC_YCCCTL, 0x1);
-		venc_modify(sd, VENC_VDPRO, 0, VENC_VDPRO_DAFRQ);
-		venc_modify(sd, VENC_VDPRO, 0, VENC_VDPRO_DAUPS);
-	}
-
-	venc_write(sd, VENC_VMOD, 0);
-	venc_modify(sd, VENC_VMOD, (1 << VENC_VMOD_VIE_SHIFT),
-			VENC_VMOD_VIE);
-	venc_modify(sd, VENC_VMOD, (0 << VENC_VMOD_VMD), VENC_VMOD_VMD);
-	venc_modify(sd, VENC_VMOD, (0 << VENC_VMOD_TVTYP_SHIFT),
-			VENC_VMOD_TVTYP);
-	venc_write(sd, VENC_DACTST, 0x0);
-	venc_modify(sd, VENC_VMOD, VENC_VMOD_VENC, VENC_VMOD_VENC);
-
-	return 0;
-}
-
-/*
- * setting PAL mode
- */
-static int venc_set_pal(struct v4l2_subdev *sd)
-{
-	struct venc_state *venc = to_state(sd);
-	struct venc_platform_data *pdata = venc->pdata;
-
-	v4l2_dbg(debug, 2, sd, "venc_set_pal\n");
-
-	/* Setup clock at VPSS & VENC for SD */
-	vpss_enable_clock(VPSS_VENC_CLOCK_SEL, 1);
-	if (venc->pdata->setup_clock(VPBE_ENC_STD, V4L2_STD_625_50) < 0)
-		return -EINVAL;
-
-	venc_enabledigitaloutput(sd, 0);
-
-	if (pdata->venc_type == VPBE_VERSION_3) {
-		venc_write(sd, VENC_CLKCTL, 0x1);
-		venc_write(sd, VENC_VIDCTL, 0);
-		vdaccfg_write(sd, VDAC_CONFIG_SD_V3);
-	} else if (pdata->venc_type == VPBE_VERSION_2) {
-		venc_write(sd, VENC_CLKCTL, 0x1);
-		venc_write(sd, VENC_VIDCTL, 0);
-		vdaccfg_write(sd, VDAC_CONFIG_SD_V2);
-	} else {
-		/* to set VENC CLK DIV to 1 - final clock is 54 MHz */
-		venc_modify(sd, VENC_VIDCTL, 0, 1 << 1);
-		/* Set REC656 Mode */
-		venc_write(sd, VENC_YCCCTL, 0x1);
-	}
-
-	venc_modify(sd, VENC_SYNCCTL, 1 << VENC_SYNCCTL_OVD_SHIFT,
-			VENC_SYNCCTL_OVD);
-	venc_write(sd, VENC_VMOD, 0);
-	venc_modify(sd, VENC_VMOD,
-			(1 << VENC_VMOD_VIE_SHIFT),
-			VENC_VMOD_VIE);
-	venc_modify(sd, VENC_VMOD,
-			(0 << VENC_VMOD_VMD), VENC_VMOD_VMD);
-	venc_modify(sd, VENC_VMOD,
-			(1 << VENC_VMOD_TVTYP_SHIFT),
-			VENC_VMOD_TVTYP);
-	venc_write(sd, VENC_DACTST, 0x0);
-	venc_modify(sd, VENC_VMOD, VENC_VMOD_VENC, VENC_VMOD_VENC);
-
-	return 0;
-}
-
-#define VDAC_CONFIG_HD_V2	0x081141EF
-/*
- * venc_set_480p59_94
- *
- * This function configures the video encoder to EDTV(525p) component setting.
- */
-static int venc_set_480p59_94(struct v4l2_subdev *sd)
-{
-	struct venc_state *venc = to_state(sd);
-	struct venc_platform_data *pdata = venc->pdata;
-
-	v4l2_dbg(debug, 2, sd, "venc_set_480p59_94\n");
-	if ((pdata->venc_type != VPBE_VERSION_1) &&
-	    (pdata->venc_type != VPBE_VERSION_2))
-		return -EINVAL;
-
-	/* Setup clock at VPSS & VENC for SD */
-	if (pdata->setup_clock(VPBE_ENC_DV_PRESET, V4L2_DV_480P59_94) < 0)
-		return -EINVAL;
-
-	venc_enabledigitaloutput(sd, 0);
-
-	if (pdata->venc_type == VPBE_VERSION_2)
-		vdaccfg_write(sd, VDAC_CONFIG_HD_V2);
-	venc_write(sd, VENC_OSDCLK0, 0);
-	venc_write(sd, VENC_OSDCLK1, 1);
-
-	if (pdata->venc_type == VPBE_VERSION_1) {
-		venc_modify(sd, VENC_VDPRO, VENC_VDPRO_DAFRQ,
-			    VENC_VDPRO_DAFRQ);
-		venc_modify(sd, VENC_VDPRO, VENC_VDPRO_DAUPS,
-			    VENC_VDPRO_DAUPS);
-	}
-
-	venc_write(sd, VENC_VMOD, 0);
-	venc_modify(sd, VENC_VMOD, (1 << VENC_VMOD_VIE_SHIFT),
-		    VENC_VMOD_VIE);
-	venc_modify(sd, VENC_VMOD, VENC_VMOD_HDMD, VENC_VMOD_HDMD);
-	venc_modify(sd, VENC_VMOD, (HDTV_525P << VENC_VMOD_TVTYP_SHIFT),
-		    VENC_VMOD_TVTYP);
-	venc_modify(sd, VENC_VMOD, VENC_VMOD_VDMD_YCBCR8 <<
-		    VENC_VMOD_VDMD_SHIFT, VENC_VMOD_VDMD);
-
-	venc_modify(sd, VENC_VMOD, VENC_VMOD_VENC, VENC_VMOD_VENC);
-
-	return 0;
-}
-
-/*
- * venc_set_625p
- *
- * This function configures the video encoder to HDTV(625p) component setting
- */
-static int venc_set_576p50(struct v4l2_subdev *sd)
-{
-	struct venc_state *venc = to_state(sd);
-	struct venc_platform_data *pdata = venc->pdata;
-
-	v4l2_dbg(debug, 2, sd, "venc_set_576p50\n");
-
-	if ((pdata->venc_type != VPBE_VERSION_1) &&
-	  (pdata->venc_type != VPBE_VERSION_2))
-		return -EINVAL;
-	/* Setup clock at VPSS & VENC for SD */
-	if (pdata->setup_clock(VPBE_ENC_DV_PRESET, V4L2_DV_576P50) < 0)
-		return -EINVAL;
-
-	venc_enabledigitaloutput(sd, 0);
-
-	if (pdata->venc_type == VPBE_VERSION_2)
-		vdaccfg_write(sd, VDAC_CONFIG_HD_V2);
-
-	venc_write(sd, VENC_OSDCLK0, 0);
-	venc_write(sd, VENC_OSDCLK1, 1);
-
-	if (pdata->venc_type == VPBE_VERSION_1) {
-		venc_modify(sd, VENC_VDPRO, VENC_VDPRO_DAFRQ,
-			    VENC_VDPRO_DAFRQ);
-		venc_modify(sd, VENC_VDPRO, VENC_VDPRO_DAUPS,
-			    VENC_VDPRO_DAUPS);
-	}
-
-	venc_write(sd, VENC_VMOD, 0);
-	venc_modify(sd, VENC_VMOD, (1 << VENC_VMOD_VIE_SHIFT),
-		    VENC_VMOD_VIE);
-	venc_modify(sd, VENC_VMOD, VENC_VMOD_HDMD, VENC_VMOD_HDMD);
-	venc_modify(sd, VENC_VMOD, (HDTV_625P << VENC_VMOD_TVTYP_SHIFT),
-		    VENC_VMOD_TVTYP);
-
-	venc_modify(sd, VENC_VMOD, VENC_VMOD_VDMD_YCBCR8 <<
-		    VENC_VMOD_VDMD_SHIFT, VENC_VMOD_VDMD);
-	venc_modify(sd, VENC_VMOD, VENC_VMOD_VENC, VENC_VMOD_VENC);
-
-	return 0;
-}
-
-/*
- * venc_set_720p60_internal - Setup 720p60 in venc for dm365 only
- */
-static int venc_set_720p60_internal(struct v4l2_subdev *sd)
-{
-	struct venc_state *venc = to_state(sd);
-	struct venc_platform_data *pdata = venc->pdata;
-
-	if (pdata->setup_clock(VPBE_ENC_DV_PRESET, V4L2_DV_720P60) < 0)
-		return -EINVAL;
-
-	venc_enabledigitaloutput(sd, 0);
-
-	venc_write(sd, VENC_OSDCLK0, 0);
-	venc_write(sd, VENC_OSDCLK1, 1);
-
-	venc_write(sd, VENC_VMOD, 0);
-	/* DM365 component HD mode */
-	venc_modify(sd, VENC_VMOD, (1 << VENC_VMOD_VIE_SHIFT),
-	    VENC_VMOD_VIE);
-	venc_modify(sd, VENC_VMOD, VENC_VMOD_HDMD, VENC_VMOD_HDMD);
-	venc_modify(sd, VENC_VMOD, (HDTV_720P << VENC_VMOD_TVTYP_SHIFT),
-		    VENC_VMOD_TVTYP);
-	venc_modify(sd, VENC_VMOD, VENC_VMOD_VENC, VENC_VMOD_VENC);
-	venc_write(sd, VENC_XHINTVL, 0);
-	return 0;
-}
-
-/*
- * venc_set_1080i30_internal - Setup 1080i30 in venc for dm365 only
- */
-static int venc_set_1080i30_internal(struct v4l2_subdev *sd)
-{
-	struct venc_state *venc = to_state(sd);
-	struct venc_platform_data *pdata = venc->pdata;
-
-	if (pdata->setup_clock(VPBE_ENC_DV_PRESET, V4L2_DV_1080P30) < 0)
-		return -EINVAL;
-
-	venc_enabledigitaloutput(sd, 0);
-
-	venc_write(sd, VENC_OSDCLK0, 0);
-	venc_write(sd, VENC_OSDCLK1, 1);
-
-
-	venc_write(sd, VENC_VMOD, 0);
-	/* DM365 component HD mode */
-	venc_modify(sd, VENC_VMOD, (1 << VENC_VMOD_VIE_SHIFT),
-		    VENC_VMOD_VIE);
-	venc_modify(sd, VENC_VMOD, VENC_VMOD_HDMD, VENC_VMOD_HDMD);
-	venc_modify(sd, VENC_VMOD, (HDTV_1080I << VENC_VMOD_TVTYP_SHIFT),
-		    VENC_VMOD_TVTYP);
-	venc_modify(sd, VENC_VMOD, VENC_VMOD_VENC, VENC_VMOD_VENC);
-	venc_write(sd, VENC_XHINTVL, 0);
-	return 0;
-}
-
-static int venc_s_std_output(struct v4l2_subdev *sd, v4l2_std_id norm)
-{
-	v4l2_dbg(debug, 1, sd, "venc_s_std_output\n");
-
-	if (norm & V4L2_STD_525_60)
-		return venc_set_ntsc(sd);
-	else if (norm & V4L2_STD_625_50)
-		return venc_set_pal(sd);
-
-	return -EINVAL;
-}
-
-static int venc_s_dv_preset(struct v4l2_subdev *sd,
-			    struct v4l2_dv_preset *dv_preset)
-{
-	struct venc_state *venc = to_state(sd);
-	int ret;
-
-	v4l2_dbg(debug, 1, sd, "venc_s_dv_preset\n");
-
-	if (dv_preset->preset == V4L2_DV_576P50)
-		return venc_set_576p50(sd);
-	else if (dv_preset->preset == V4L2_DV_480P59_94)
-		return venc_set_480p59_94(sd);
-	else if ((dv_preset->preset == V4L2_DV_720P60) &&
-			(venc->pdata->venc_type == VPBE_VERSION_2)) {
-		/* TBD setup internal 720p mode here */
-		ret = venc_set_720p60_internal(sd);
-		/* for DM365 VPBE, there is DAC inside */
-		vdaccfg_write(sd, VDAC_CONFIG_HD_V2);
-		return ret;
-	} else if ((dv_preset->preset == V4L2_DV_1080I30) &&
-		(venc->pdata->venc_type == VPBE_VERSION_2)) {
-		/* TBD setup internal 1080i mode here */
-		ret = venc_set_1080i30_internal(sd);
-		/* for DM365 VPBE, there is DAC inside */
-		vdaccfg_write(sd, VDAC_CONFIG_HD_V2);
-		return ret;
-	}
-	return -EINVAL;
-}
-
-static int venc_s_routing(struct v4l2_subdev *sd, u32 input, u32 output,
-			  u32 config)
-{
-	struct venc_state *venc = to_state(sd);
-	int ret;
-
-	v4l2_dbg(debug, 1, sd, "venc_s_routing\n");
-
-	ret = venc_set_dac(sd, output);
-	if (!ret)
-		venc->output = output;
-
-	return ret;
-}
-
-static long venc_ioctl(struct v4l2_subdev *sd,
-			unsigned int cmd,
-			void *arg)
-{
-	u32 val;
-
-	switch (cmd) {
-	case VENC_GET_FLD:
-		val = venc_read(sd, VENC_VSTAT);
-		*((int *)arg) = ((val & VENC_VSTAT_FIDST) ==
-		VENC_VSTAT_FIDST);
-		break;
-	default:
-		v4l2_err(sd, "Wrong IOCTL cmd\n");
-		break;
-	}
-
-	return 0;
-}
-
-static const struct v4l2_subdev_core_ops venc_core_ops = {
-	.ioctl      = venc_ioctl,
-};
-
-static const struct v4l2_subdev_video_ops venc_video_ops = {
-	.s_routing = venc_s_routing,
-	.s_std_output = venc_s_std_output,
-	.s_dv_preset = venc_s_dv_preset,
-};
-
-static const struct v4l2_subdev_ops venc_ops = {
-	.core = &venc_core_ops,
-	.video = &venc_video_ops,
-};
-
-static int venc_initialize(struct v4l2_subdev *sd)
-{
-	struct venc_state *venc = to_state(sd);
-	int ret;
-
-	/* Set default to output to composite and std to NTSC */
-	venc->output = 0;
-	venc->std = V4L2_STD_525_60;
-
-	ret = venc_s_routing(sd, 0, venc->output, 0);
-	if (ret < 0) {
-		v4l2_err(sd, "Error setting output during init\n");
-		return -EINVAL;
-	}
-
-	ret = venc_s_std_output(sd, venc->std);
-	if (ret < 0) {
-		v4l2_err(sd, "Error setting std during init\n");
-		return -EINVAL;
-	}
-
-	return ret;
-}
-
-static int venc_device_get(struct device *dev, void *data)
-{
-	struct platform_device *pdev = to_platform_device(dev);
-	struct venc_state **venc = data;
-
-	if (strcmp(MODULE_NAME, pdev->name) == 0)
-		*venc = platform_get_drvdata(pdev);
-
-	return 0;
-}
-
-struct v4l2_subdev *venc_sub_dev_init(struct v4l2_device *v4l2_dev,
-		const char *venc_name)
-{
-	struct venc_state *venc;
-	int err;
-
-	err = bus_for_each_dev(&platform_bus_type, NULL, &venc,
-			venc_device_get);
-	if (venc == NULL)
-		return NULL;
-
-	v4l2_subdev_init(&venc->sd, &venc_ops);
-
-	strcpy(venc->sd.name, venc_name);
-	if (v4l2_device_register_subdev(v4l2_dev, &venc->sd) < 0) {
-		v4l2_err(v4l2_dev,
-			"vpbe unable to register venc sub device\n");
-		return NULL;
-	}
-	if (venc_initialize(&venc->sd)) {
-		v4l2_err(v4l2_dev,
-			"vpbe venc initialization failed\n");
-		return NULL;
-	}
-
-	return &venc->sd;
-}
-EXPORT_SYMBOL(venc_sub_dev_init);
-
-static int venc_probe(struct platform_device *pdev)
-{
-	struct venc_state *venc;
-	struct resource *res;
-	int ret;
-
-	venc = kzalloc(sizeof(struct venc_state), GFP_KERNEL);
-	if (venc == NULL)
-		return -ENOMEM;
-
-	venc->pdev = &pdev->dev;
-	venc->pdata = pdev->dev.platform_data;
-	if (NULL == venc->pdata) {
-		dev_err(venc->pdev, "Unable to get platform data for"
-			" VENC sub device");
-		ret = -ENOENT;
-		goto free_mem;
-	}
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!res) {
-		dev_err(venc->pdev,
-			"Unable to get VENC register address map\n");
-		ret = -ENODEV;
-		goto free_mem;
-	}
-
-	if (!request_mem_region(res->start, resource_size(res), "venc")) {
-		dev_err(venc->pdev, "Unable to reserve VENC MMIO region\n");
-		ret = -ENODEV;
-		goto free_mem;
-	}
-
-	venc->venc_base = ioremap_nocache(res->start, resource_size(res));
-	if (!venc->venc_base) {
-		dev_err(venc->pdev, "Unable to map VENC IO space\n");
-		ret = -ENODEV;
-		goto release_venc_mem_region;
-	}
-
-	if (venc->pdata->venc_type != VPBE_VERSION_1) {
-		res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-		if (!res) {
-			dev_err(venc->pdev,
-				"Unable to get VDAC_CONFIG address map\n");
-			ret = -ENODEV;
-			goto unmap_venc_io;
-		}
-
-		if (!request_mem_region(res->start,
-					resource_size(res), "venc")) {
-			dev_err(venc->pdev,
-				"Unable to reserve VDAC_CONFIG  MMIO region\n");
-			ret = -ENODEV;
-			goto unmap_venc_io;
-		}
-
-		venc->vdaccfg_reg = ioremap_nocache(res->start,
-						    resource_size(res));
-		if (!venc->vdaccfg_reg) {
-			dev_err(venc->pdev,
-				"Unable to map VDAC_CONFIG IO space\n");
-			ret = -ENODEV;
-			goto release_vdaccfg_mem_region;
-		}
-	}
-	spin_lock_init(&venc->lock);
-	platform_set_drvdata(pdev, venc);
-	dev_notice(venc->pdev, "VENC sub device probe success\n");
-	return 0;
-
-release_vdaccfg_mem_region:
-	release_mem_region(res->start, resource_size(res));
-unmap_venc_io:
-	iounmap(venc->venc_base);
-release_venc_mem_region:
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	release_mem_region(res->start, resource_size(res));
-free_mem:
-	kfree(venc);
-	return ret;
-}
-
-static int venc_remove(struct platform_device *pdev)
-{
-	struct venc_state *venc = platform_get_drvdata(pdev);
-	struct resource *res;
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	iounmap((void *)venc->venc_base);
-	release_mem_region(res->start, resource_size(res));
-	if (venc->pdata->venc_type != VPBE_VERSION_1) {
-		res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-		iounmap((void *)venc->vdaccfg_reg);
-		release_mem_region(res->start, resource_size(res));
-	}
-	kfree(venc);
-
-	return 0;
-}
-
-static struct platform_driver venc_driver = {
-	.probe		= venc_probe,
-	.remove		= venc_remove,
-	.driver		= {
-		.name	= MODULE_NAME,
-		.owner	= THIS_MODULE,
-	},
-};
-
-module_platform_driver(venc_driver);
-
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("VPBE VENC Driver");
-MODULE_AUTHOR("Texas Instruments");
diff --git a/drivers/media/video/davinci/vpbe_venc_regs.h b/drivers/media/video/davinci/vpbe_venc_regs.h
deleted file mode 100644
index 947cb151077..00000000000
--- a/drivers/media/video/davinci/vpbe_venc_regs.h
+++ /dev/null
@@ -1,177 +0,0 @@
-/*
- * Copyright (C) 2006-2010 Texas Instruments Inc
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation version 2..
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef _VPBE_VENC_REGS_H
-#define _VPBE_VENC_REGS_H
-
-/* VPBE Video Encoder / Digital LCD Subsystem Registers (VENC) */
-#define VENC_VMOD				0x00
-#define VENC_VIDCTL				0x04
-#define VENC_VDPRO				0x08
-#define VENC_SYNCCTL				0x0C
-#define VENC_HSPLS				0x10
-#define VENC_VSPLS				0x14
-#define VENC_HINT				0x18
-#define VENC_HSTART				0x1C
-#define VENC_HVALID				0x20
-#define VENC_VINT				0x24
-#define VENC_VSTART				0x28
-#define VENC_VVALID				0x2C
-#define VENC_HSDLY				0x30
-#define VENC_VSDLY				0x34
-#define VENC_YCCCTL				0x38
-#define VENC_RGBCTL				0x3C
-#define VENC_RGBCLP				0x40
-#define VENC_LINECTL				0x44
-#define VENC_CULLLINE				0x48
-#define VENC_LCDOUT				0x4C
-#define VENC_BRTS				0x50
-#define VENC_BRTW				0x54
-#define VENC_ACCTL				0x58
-#define VENC_PWMP				0x5C
-#define VENC_PWMW				0x60
-#define VENC_DCLKCTL				0x64
-#define VENC_DCLKPTN0				0x68
-#define VENC_DCLKPTN1				0x6C
-#define VENC_DCLKPTN2				0x70
-#define VENC_DCLKPTN3				0x74
-#define VENC_DCLKPTN0A				0x78
-#define VENC_DCLKPTN1A				0x7C
-#define VENC_DCLKPTN2A				0x80
-#define VENC_DCLKPTN3A				0x84
-#define VENC_DCLKHS				0x88
-#define VENC_DCLKHSA				0x8C
-#define VENC_DCLKHR				0x90
-#define VENC_DCLKVS				0x94
-#define VENC_DCLKVR				0x98
-#define VENC_CAPCTL				0x9C
-#define VENC_CAPDO				0xA0
-#define VENC_CAPDE				0xA4
-#define VENC_ATR0				0xA8
-#define VENC_ATR1				0xAC
-#define VENC_ATR2				0xB0
-#define VENC_VSTAT				0xB8
-#define VENC_RAMADR				0xBC
-#define VENC_RAMPORT				0xC0
-#define VENC_DACTST				0xC4
-#define VENC_YCOLVL				0xC8
-#define VENC_SCPROG				0xCC
-#define VENC_CVBS				0xDC
-#define VENC_CMPNT				0xE0
-#define VENC_ETMG0				0xE4
-#define VENC_ETMG1				0xE8
-#define VENC_ETMG2				0xEC
-#define VENC_ETMG3				0xF0
-#define VENC_DACSEL				0xF4
-#define VENC_ARGBX0				0x100
-#define VENC_ARGBX1				0x104
-#define VENC_ARGBX2				0x108
-#define VENC_ARGBX3				0x10C
-#define VENC_ARGBX4				0x110
-#define VENC_DRGBX0				0x114
-#define VENC_DRGBX1				0x118
-#define VENC_DRGBX2				0x11C
-#define VENC_DRGBX3				0x120
-#define VENC_DRGBX4				0x124
-#define VENC_VSTARTA				0x128
-#define VENC_OSDCLK0				0x12C
-#define VENC_OSDCLK1				0x130
-#define VENC_HVLDCL0				0x134
-#define VENC_HVLDCL1				0x138
-#define VENC_OSDHADV				0x13C
-#define VENC_CLKCTL				0x140
-#define VENC_GAMCTL				0x144
-#define VENC_XHINTVL				0x174
-
-/* bit definitions */
-#define VPBE_PCR_VENC_DIV			(1 << 1)
-#define VPBE_PCR_CLK_OFF			(1 << 0)
-
-#define VENC_VMOD_VDMD_SHIFT			12
-#define VENC_VMOD_VDMD_YCBCR16			0
-#define VENC_VMOD_VDMD_YCBCR8			1
-#define VENC_VMOD_VDMD_RGB666			2
-#define VENC_VMOD_VDMD_RGB8			3
-#define VENC_VMOD_VDMD_EPSON			4
-#define VENC_VMOD_VDMD_CASIO			5
-#define VENC_VMOD_VDMD_UDISPQVGA		6
-#define VENC_VMOD_VDMD_STNLCD			7
-#define VENC_VMOD_VIE_SHIFT			1
-#define VENC_VMOD_VDMD				(7 << 12)
-#define VENC_VMOD_ITLCL				(1 << 11)
-#define VENC_VMOD_ITLC				(1 << 10)
-#define VENC_VMOD_NSIT				(1 << 9)
-#define VENC_VMOD_HDMD				(1 << 8)
-#define VENC_VMOD_TVTYP_SHIFT			6
-#define VENC_VMOD_TVTYP				(3 << 6)
-#define VENC_VMOD_SLAVE				(1 << 5)
-#define VENC_VMOD_VMD				(1 << 4)
-#define VENC_VMOD_BLNK				(1 << 3)
-#define VENC_VMOD_VIE				(1 << 1)
-#define VENC_VMOD_VENC				(1 << 0)
-
-/* VMOD TVTYP options for HDMD=0 */
-#define SDTV_NTSC				0
-#define SDTV_PAL				1
-/* VMOD TVTYP options for HDMD=1 */
-#define HDTV_525P				0
-#define HDTV_625P				1
-#define HDTV_1080I				2
-#define HDTV_720P				3
-
-#define VENC_VIDCTL_VCLKP			(1 << 14)
-#define VENC_VIDCTL_VCLKE_SHIFT			13
-#define VENC_VIDCTL_VCLKE			(1 << 13)
-#define VENC_VIDCTL_VCLKZ_SHIFT			12
-#define VENC_VIDCTL_VCLKZ			(1 << 12)
-#define VENC_VIDCTL_SYDIR_SHIFT			8
-#define VENC_VIDCTL_SYDIR			(1 << 8)
-#define VENC_VIDCTL_DOMD_SHIFT			4
-#define VENC_VIDCTL_DOMD			(3 << 4)
-#define VENC_VIDCTL_YCDIR_SHIFT			0
-#define VENC_VIDCTL_YCDIR			(1 << 0)
-
-#define VENC_VDPRO_ATYCC_SHIFT			5
-#define VENC_VDPRO_ATYCC			(1 << 5)
-#define VENC_VDPRO_ATCOM_SHIFT			4
-#define VENC_VDPRO_ATCOM			(1 << 4)
-#define VENC_VDPRO_DAFRQ			(1 << 3)
-#define VENC_VDPRO_DAUPS			(1 << 2)
-#define VENC_VDPRO_CUPS				(1 << 1)
-#define VENC_VDPRO_YUPS				(1 << 0)
-
-#define VENC_SYNCCTL_VPL_SHIFT			3
-#define VENC_SYNCCTL_VPL			(1 << 3)
-#define VENC_SYNCCTL_HPL_SHIFT			2
-#define VENC_SYNCCTL_HPL			(1 << 2)
-#define VENC_SYNCCTL_SYEV_SHIFT			1
-#define VENC_SYNCCTL_SYEV			(1 << 1)
-#define VENC_SYNCCTL_SYEH_SHIFT			0
-#define VENC_SYNCCTL_SYEH			(1 << 0)
-#define VENC_SYNCCTL_OVD_SHIFT			14
-#define VENC_SYNCCTL_OVD			(1 << 14)
-
-#define VENC_DCLKCTL_DCKEC_SHIFT		11
-#define VENC_DCLKCTL_DCKEC			(1 << 11)
-#define VENC_DCLKCTL_DCKPW_SHIFT		0
-#define VENC_DCLKCTL_DCKPW			(0x3f << 0)
-
-#define VENC_VSTAT_FIDST			(1 << 4)
-
-#define VENC_CMPNT_MRGB_SHIFT			14
-#define VENC_CMPNT_MRGB				(1 << 14)
-
-#endif				/* _VPBE_VENC_REGS_H */
diff --git a/drivers/media/video/davinci/vpfe_capture.c b/drivers/media/video/davinci/vpfe_capture.c
deleted file mode 100644
index 843b138faab..00000000000
--- a/drivers/media/video/davinci/vpfe_capture.c
+++ /dev/null
@@ -1,2079 +0,0 @@
-/*
- * Copyright (C) 2008-2009 Texas Instruments Inc
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
- *
- * Driver name : VPFE Capture driver
- *    VPFE Capture driver allows applications to capture and stream video
- *    frames on DaVinci SoCs (DM6446, DM355 etc) from a YUV source such as
- *    TVP5146 or  Raw Bayer RGB image data from an image sensor
- *    such as Microns' MT9T001, MT9T031 etc.
- *
- *    These SoCs have, in common, a Video Processing Subsystem (VPSS) that
- *    consists of a Video Processing Front End (VPFE) for capturing
- *    video/raw image data and Video Processing Back End (VPBE) for displaying
- *    YUV data through an in-built analog encoder or Digital LCD port. This
- *    driver is for capture through VPFE. A typical EVM using these SoCs have
- *    following high level configuration.
- *
- *
- *    decoder(TVP5146/		YUV/
- * 	     MT9T001)   -->  Raw Bayer RGB ---> MUX -> VPFE (CCDC/ISIF)
- *    				data input              |      |
- *							V      |
- *						      SDRAM    |
- *							       V
- *							   Image Processor
- *							       |
- *							       V
- *							     SDRAM
- *    The data flow happens from a decoder connected to the VPFE over a
- *    YUV embedded (BT.656/BT.1120) or separate sync or raw bayer rgb interface
- *    and to the input of VPFE through an optional MUX (if more inputs are
- *    to be interfaced on the EVM). The input data is first passed through
- *    CCDC (CCD Controller, a.k.a Image Sensor Interface, ISIF). The CCDC
- *    does very little or no processing on YUV data and does pre-process Raw
- *    Bayer RGB data through modules such as Defect Pixel Correction (DFC)
- *    Color Space Conversion (CSC), data gain/offset etc. After this, data
- *    can be written to SDRAM or can be connected to the image processing
- *    block such as IPIPE (on DM355 only).
- *
- *    Features supported
- *  		- MMAP IO
- *		- Capture using TVP5146 over BT.656
- *		- support for interfacing decoders using sub device model
- *		- Work with DM355 or DM6446 CCDC to do Raw Bayer RGB/YUV
- *		  data capture to SDRAM.
- *    TODO list
- *		- Support multiple REQBUF after open
- *		- Support for de-allocating buffers through REQBUF
- *		- Support for Raw Bayer RGB capture
- *		- Support for chaining Image Processor
- *		- Support for static allocation of buffers
- *		- Support for USERPTR IO
- *		- Support for STREAMON before QBUF
- *		- Support for control ioctls
- */
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <media/v4l2-common.h>
-#include <linux/io.h>
-#include <media/davinci/vpfe_capture.h>
-#include "ccdc_hw_device.h"
-
-static int debug;
-static u32 numbuffers = 3;
-static u32 bufsize = (720 * 576 * 2);
-
-module_param(numbuffers, uint, S_IRUGO);
-module_param(bufsize, uint, S_IRUGO);
-module_param(debug, int, 0644);
-
-MODULE_PARM_DESC(numbuffers, "buffer count (default:3)");
-MODULE_PARM_DESC(bufsize, "buffer size in bytes (default:720 x 576 x 2)");
-MODULE_PARM_DESC(debug, "Debug level 0-1");
-
-MODULE_DESCRIPTION("VPFE Video for Linux Capture Driver");
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Texas Instruments");
-
-/* standard information */
-struct vpfe_standard {
-	v4l2_std_id std_id;
-	unsigned int width;
-	unsigned int height;
-	struct v4l2_fract pixelaspect;
-	/* 0 - progressive, 1 - interlaced */
-	int frame_format;
-};
-
-/* ccdc configuration */
-struct ccdc_config {
-	/* This make sure vpfe is probed and ready to go */
-	int vpfe_probed;
-	/* name of ccdc device */
-	char name[32];
-};
-
-/* data structures */
-static struct vpfe_config_params config_params = {
-	.min_numbuffers = 3,
-	.numbuffers = 3,
-	.min_bufsize = 720 * 480 * 2,
-	.device_bufsize = 720 * 576 * 2,
-};
-
-/* ccdc device registered */
-static struct ccdc_hw_device *ccdc_dev;
-/* lock for accessing ccdc information */
-static DEFINE_MUTEX(ccdc_lock);
-/* ccdc configuration */
-static struct ccdc_config *ccdc_cfg;
-
-const struct vpfe_standard vpfe_standards[] = {
-	{V4L2_STD_525_60, 720, 480, {11, 10}, 1},
-	{V4L2_STD_625_50, 720, 576, {54, 59}, 1},
-};
-
-/* Used when raw Bayer image from ccdc is directly captured to SDRAM */
-static const struct vpfe_pixel_format vpfe_pix_fmts[] = {
-	{
-		.fmtdesc = {
-			.index = 0,
-			.type = V4L2_BUF_TYPE_VIDEO_CAPTURE,
-			.description = "Bayer GrRBGb 8bit A-Law compr.",
-			.pixelformat = V4L2_PIX_FMT_SBGGR8,
-		},
-		.bpp = 1,
-	},
-	{
-		.fmtdesc = {
-			.index = 1,
-			.type = V4L2_BUF_TYPE_VIDEO_CAPTURE,
-			.description = "Bayer GrRBGb - 16bit",
-			.pixelformat = V4L2_PIX_FMT_SBGGR16,
-		},
-		.bpp = 2,
-	},
-	{
-		.fmtdesc = {
-			.index = 2,
-			.type = V4L2_BUF_TYPE_VIDEO_CAPTURE,
-			.description = "Bayer GrRBGb 8bit DPCM compr.",
-			.pixelformat = V4L2_PIX_FMT_SGRBG10DPCM8,
-		},
-		.bpp = 1,
-	},
-	{
-		.fmtdesc = {
-			.index = 3,
-			.type = V4L2_BUF_TYPE_VIDEO_CAPTURE,
-			.description = "YCbCr 4:2:2 Interleaved UYVY",
-			.pixelformat = V4L2_PIX_FMT_UYVY,
-		},
-		.bpp = 2,
-	},
-	{
-		.fmtdesc = {
-			.index = 4,
-			.type = V4L2_BUF_TYPE_VIDEO_CAPTURE,
-			.description = "YCbCr 4:2:2 Interleaved YUYV",
-			.pixelformat = V4L2_PIX_FMT_YUYV,
-		},
-		.bpp = 2,
-	},
-	{
-		.fmtdesc = {
-			.index = 5,
-			.type = V4L2_BUF_TYPE_VIDEO_CAPTURE,
-			.description = "Y/CbCr 4:2:0 - Semi planar",
-			.pixelformat = V4L2_PIX_FMT_NV12,
-		},
-		.bpp = 1,
-	},
-};
-
-/*
- * vpfe_lookup_pix_format()
- * lookup an entry in the vpfe pix format table based on pix_format
- */
-static const struct vpfe_pixel_format *vpfe_lookup_pix_format(u32 pix_format)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(vpfe_pix_fmts); i++) {
-		if (pix_format == vpfe_pix_fmts[i].fmtdesc.pixelformat)
-			return &vpfe_pix_fmts[i];
-	}
-	return NULL;
-}
-
-/*
- * vpfe_register_ccdc_device. CCDC module calls this to
- * register with vpfe capture
- */
-int vpfe_register_ccdc_device(struct ccdc_hw_device *dev)
-{
-	int ret = 0;
-	printk(KERN_NOTICE "vpfe_register_ccdc_device: %s\n", dev->name);
-
-	BUG_ON(!dev->hw_ops.open);
-	BUG_ON(!dev->hw_ops.enable);
-	BUG_ON(!dev->hw_ops.set_hw_if_params);
-	BUG_ON(!dev->hw_ops.configure);
-	BUG_ON(!dev->hw_ops.set_buftype);
-	BUG_ON(!dev->hw_ops.get_buftype);
-	BUG_ON(!dev->hw_ops.enum_pix);
-	BUG_ON(!dev->hw_ops.set_frame_format);
-	BUG_ON(!dev->hw_ops.get_frame_format);
-	BUG_ON(!dev->hw_ops.get_pixel_format);
-	BUG_ON(!dev->hw_ops.set_pixel_format);
-	BUG_ON(!dev->hw_ops.set_image_window);
-	BUG_ON(!dev->hw_ops.get_image_window);
-	BUG_ON(!dev->hw_ops.get_line_length);
-	BUG_ON(!dev->hw_ops.getfid);
-
-	mutex_lock(&ccdc_lock);
-	if (NULL == ccdc_cfg) {
-		/*
-		 * TODO. Will this ever happen? if so, we need to fix it.
-		 * Proabably we need to add the request to a linked list and
-		 * walk through it during vpfe probe
-		 */
-		printk(KERN_ERR "vpfe capture not initialized\n");
-		ret = -EFAULT;
-		goto unlock;
-	}
-
-	if (strcmp(dev->name, ccdc_cfg->name)) {
-		/* ignore this ccdc */
-		ret = -EINVAL;
-		goto unlock;
-	}
-
-	if (ccdc_dev) {
-		printk(KERN_ERR "ccdc already registered\n");
-		ret = -EINVAL;
-		goto unlock;
-	}
-
-	ccdc_dev = dev;
-unlock:
-	mutex_unlock(&ccdc_lock);
-	return ret;
-}
-EXPORT_SYMBOL(vpfe_register_ccdc_device);
-
-/*
- * vpfe_unregister_ccdc_device. CCDC module calls this to
- * unregister with vpfe capture
- */
-void vpfe_unregister_ccdc_device(struct ccdc_hw_device *dev)
-{
-	if (NULL == dev) {
-		printk(KERN_ERR "invalid ccdc device ptr\n");
-		return;
-	}
-
-	printk(KERN_NOTICE "vpfe_unregister_ccdc_device, dev->name = %s\n",
-		dev->name);
-
-	if (strcmp(dev->name, ccdc_cfg->name)) {
-		/* ignore this ccdc */
-		return;
-	}
-
-	mutex_lock(&ccdc_lock);
-	ccdc_dev = NULL;
-	mutex_unlock(&ccdc_lock);
-	return;
-}
-EXPORT_SYMBOL(vpfe_unregister_ccdc_device);
-
-/*
- * vpfe_get_ccdc_image_format - Get image parameters based on CCDC settings
- */
-static int vpfe_get_ccdc_image_format(struct vpfe_device *vpfe_dev,
-				 struct v4l2_format *f)
-{
-	struct v4l2_rect image_win;
-	enum ccdc_buftype buf_type;
-	enum ccdc_frmfmt frm_fmt;
-
-	memset(f, 0, sizeof(*f));
-	f->type = V4L2_BUF_TYPE_VIDEO_OUTPUT;
-	ccdc_dev->hw_ops.get_image_window(&image_win);
-	f->fmt.pix.width = image_win.width;
-	f->fmt.pix.height = image_win.height;
-	f->fmt.pix.bytesperline = ccdc_dev->hw_ops.get_line_length();
-	f->fmt.pix.sizeimage = f->fmt.pix.bytesperline *
-				f->fmt.pix.height;
-	buf_type = ccdc_dev->hw_ops.get_buftype();
-	f->fmt.pix.pixelformat = ccdc_dev->hw_ops.get_pixel_format();
-	frm_fmt = ccdc_dev->hw_ops.get_frame_format();
-	if (frm_fmt == CCDC_FRMFMT_PROGRESSIVE)
-		f->fmt.pix.field = V4L2_FIELD_NONE;
-	else if (frm_fmt == CCDC_FRMFMT_INTERLACED) {
-		if (buf_type == CCDC_BUFTYPE_FLD_INTERLEAVED)
-			f->fmt.pix.field = V4L2_FIELD_INTERLACED;
-		else if (buf_type == CCDC_BUFTYPE_FLD_SEPARATED)
-			f->fmt.pix.field = V4L2_FIELD_SEQ_TB;
-		else {
-			v4l2_err(&vpfe_dev->v4l2_dev, "Invalid buf_type\n");
-			return -EINVAL;
-		}
-	} else {
-		v4l2_err(&vpfe_dev->v4l2_dev, "Invalid frm_fmt\n");
-		return -EINVAL;
-	}
-	return 0;
-}
-
-/*
- * vpfe_config_ccdc_image_format()
- * For a pix format, configure ccdc to setup the capture
- */
-static int vpfe_config_ccdc_image_format(struct vpfe_device *vpfe_dev)
-{
-	enum ccdc_frmfmt frm_fmt = CCDC_FRMFMT_INTERLACED;
-	int ret = 0;
-
-	if (ccdc_dev->hw_ops.set_pixel_format(
-			vpfe_dev->fmt.fmt.pix.pixelformat) < 0) {
-		v4l2_err(&vpfe_dev->v4l2_dev,
-			"couldn't set pix format in ccdc\n");
-		return -EINVAL;
-	}
-	/* configure the image window */
-	ccdc_dev->hw_ops.set_image_window(&vpfe_dev->crop);
-
-	switch (vpfe_dev->fmt.fmt.pix.field) {
-	case V4L2_FIELD_INTERLACED:
-		/* do nothing, since it is default */
-		ret = ccdc_dev->hw_ops.set_buftype(
-				CCDC_BUFTYPE_FLD_INTERLEAVED);
-		break;
-	case V4L2_FIELD_NONE:
-		frm_fmt = CCDC_FRMFMT_PROGRESSIVE;
-		/* buffer type only applicable for interlaced scan */
-		break;
-	case V4L2_FIELD_SEQ_TB:
-		ret = ccdc_dev->hw_ops.set_buftype(
-				CCDC_BUFTYPE_FLD_SEPARATED);
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	/* set the frame format */
-	if (!ret)
-		ret = ccdc_dev->hw_ops.set_frame_format(frm_fmt);
-	return ret;
-}
-/*
- * vpfe_config_image_format()
- * For a given standard, this functions sets up the default
- * pix format & crop values in the vpfe device and ccdc.  It first
- * starts with defaults based values from the standard table.
- * It then checks if sub device support g_mbus_fmt and then override the
- * values based on that.Sets crop values to match with scan resolution
- * starting at 0,0. It calls vpfe_config_ccdc_image_format() set the
- * values in ccdc
- */
-static int vpfe_config_image_format(struct vpfe_device *vpfe_dev,
-				    const v4l2_std_id *std_id)
-{
-	struct vpfe_subdev_info *sdinfo = vpfe_dev->current_subdev;
-	struct v4l2_mbus_framefmt mbus_fmt;
-	struct v4l2_pix_format *pix = &vpfe_dev->fmt.fmt.pix;
-	int i, ret = 0;
-
-	for (i = 0; i < ARRAY_SIZE(vpfe_standards); i++) {
-		if (vpfe_standards[i].std_id & *std_id) {
-			vpfe_dev->std_info.active_pixels =
-					vpfe_standards[i].width;
-			vpfe_dev->std_info.active_lines =
-					vpfe_standards[i].height;
-			vpfe_dev->std_info.frame_format =
-					vpfe_standards[i].frame_format;
-			vpfe_dev->std_index = i;
-			break;
-		}
-	}
-
-	if (i ==  ARRAY_SIZE(vpfe_standards)) {
-		v4l2_err(&vpfe_dev->v4l2_dev, "standard not supported\n");
-		return -EINVAL;
-	}
-
-	vpfe_dev->crop.top = 0;
-	vpfe_dev->crop.left = 0;
-	vpfe_dev->crop.width = vpfe_dev->std_info.active_pixels;
-	vpfe_dev->crop.height = vpfe_dev->std_info.active_lines;
-	pix->width = vpfe_dev->crop.width;
-	pix->height = vpfe_dev->crop.height;
-
-	/* first field and frame format based on standard frame format */
-	if (vpfe_dev->std_info.frame_format) {
-		pix->field = V4L2_FIELD_INTERLACED;
-		/* assume V4L2_PIX_FMT_UYVY as default */
-		pix->pixelformat = V4L2_PIX_FMT_UYVY;
-		v4l2_fill_mbus_format(&mbus_fmt, pix,
-				V4L2_MBUS_FMT_YUYV10_2X10);
-	} else {
-		pix->field = V4L2_FIELD_NONE;
-		/* assume V4L2_PIX_FMT_SBGGR8 */
-		pix->pixelformat = V4L2_PIX_FMT_SBGGR8;
-		v4l2_fill_mbus_format(&mbus_fmt, pix,
-				V4L2_MBUS_FMT_SBGGR8_1X8);
-	}
-
-	/* if sub device supports g_mbus_fmt, override the defaults */
-	ret = v4l2_device_call_until_err(&vpfe_dev->v4l2_dev,
-			sdinfo->grp_id, video, g_mbus_fmt, &mbus_fmt);
-
-	if (ret && ret != -ENOIOCTLCMD) {
-		v4l2_err(&vpfe_dev->v4l2_dev,
-			"error in getting g_mbus_fmt from sub device\n");
-		return ret;
-	}
-	v4l2_fill_pix_format(pix, &mbus_fmt);
-	pix->bytesperline = pix->width * 2;
-	pix->sizeimage = pix->bytesperline * pix->height;
-
-	/* Sets the values in CCDC */
-	ret = vpfe_config_ccdc_image_format(vpfe_dev);
-	if (ret)
-		return ret;
-
-	/* Update the values of sizeimage and bytesperline */
-	if (!ret) {
-		pix->bytesperline = ccdc_dev->hw_ops.get_line_length();
-		pix->sizeimage = pix->bytesperline * pix->height;
-	}
-	return ret;
-}
-
-static int vpfe_initialize_device(struct vpfe_device *vpfe_dev)
-{
-	int ret = 0;
-
-	/* set first input of current subdevice as the current input */
-	vpfe_dev->current_input = 0;
-
-	/* set default standard */
-	vpfe_dev->std_index = 0;
-
-	/* Configure the default format information */
-	ret = vpfe_config_image_format(vpfe_dev,
-				&vpfe_standards[vpfe_dev->std_index].std_id);
-	if (ret)
-		return ret;
-
-	/* now open the ccdc device to initialize it */
-	mutex_lock(&ccdc_lock);
-	if (NULL == ccdc_dev) {
-		v4l2_err(&vpfe_dev->v4l2_dev, "ccdc device not registered\n");
-		ret = -ENODEV;
-		goto unlock;
-	}
-
-	if (!try_module_get(ccdc_dev->owner)) {
-		v4l2_err(&vpfe_dev->v4l2_dev, "Couldn't lock ccdc module\n");
-		ret = -ENODEV;
-		goto unlock;
-	}
-	ret = ccdc_dev->hw_ops.open(vpfe_dev->pdev);
-	if (!ret)
-		vpfe_dev->initialized = 1;
-
-	/* Clear all VPFE/CCDC interrupts */
-	if (vpfe_dev->cfg->clr_intr)
-		vpfe_dev->cfg->clr_intr(-1);
-
-unlock:
-	mutex_unlock(&ccdc_lock);
-	return ret;
-}
-
-/*
- * vpfe_open : It creates object of file handle structure and
- * stores it in private_data  member of filepointer
- */
-static int vpfe_open(struct file *file)
-{
-	struct vpfe_device *vpfe_dev = video_drvdata(file);
-	struct vpfe_fh *fh;
-
-	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_open\n");
-
-	if (!vpfe_dev->cfg->num_subdevs) {
-		v4l2_err(&vpfe_dev->v4l2_dev, "No decoder registered\n");
-		return -ENODEV;
-	}
-
-	/* Allocate memory for the file handle object */
-	fh = kmalloc(sizeof(struct vpfe_fh), GFP_KERNEL);
-	if (NULL == fh) {
-		v4l2_err(&vpfe_dev->v4l2_dev,
-			"unable to allocate memory for file handle object\n");
-		return -ENOMEM;
-	}
-	/* store pointer to fh in private_data member of file */
-	file->private_data = fh;
-	fh->vpfe_dev = vpfe_dev;
-	mutex_lock(&vpfe_dev->lock);
-	/* If decoder is not initialized. initialize it */
-	if (!vpfe_dev->initialized) {
-		if (vpfe_initialize_device(vpfe_dev)) {
-			mutex_unlock(&vpfe_dev->lock);
-			return -ENODEV;
-		}
-	}
-	/* Increment device usrs counter */
-	vpfe_dev->usrs++;
-	/* Set io_allowed member to false */
-	fh->io_allowed = 0;
-	/* Initialize priority of this instance to default priority */
-	fh->prio = V4L2_PRIORITY_UNSET;
-	v4l2_prio_open(&vpfe_dev->prio, &fh->prio);
-	mutex_unlock(&vpfe_dev->lock);
-	return 0;
-}
-
-static void vpfe_schedule_next_buffer(struct vpfe_device *vpfe_dev)
-{
-	unsigned long addr;
-
-	vpfe_dev->next_frm = list_entry(vpfe_dev->dma_queue.next,
-					struct videobuf_buffer, queue);
-	list_del(&vpfe_dev->next_frm->queue);
-	vpfe_dev->next_frm->state = VIDEOBUF_ACTIVE;
-	addr = videobuf_to_dma_contig(vpfe_dev->next_frm);
-
-	ccdc_dev->hw_ops.setfbaddr(addr);
-}
-
-static void vpfe_schedule_bottom_field(struct vpfe_device *vpfe_dev)
-{
-	unsigned long addr;
-
-	addr = videobuf_to_dma_contig(vpfe_dev->cur_frm);
-	addr += vpfe_dev->field_off;
-	ccdc_dev->hw_ops.setfbaddr(addr);
-}
-
-static void vpfe_process_buffer_complete(struct vpfe_device *vpfe_dev)
-{
-	struct timeval timevalue;
-
-	do_gettimeofday(&timevalue);
-	vpfe_dev->cur_frm->ts = timevalue;
-	vpfe_dev->cur_frm->state = VIDEOBUF_DONE;
-	vpfe_dev->cur_frm->size = vpfe_dev->fmt.fmt.pix.sizeimage;
-	wake_up_interruptible(&vpfe_dev->cur_frm->done);
-	vpfe_dev->cur_frm = vpfe_dev->next_frm;
-}
-
-/* ISR for VINT0*/
-static irqreturn_t vpfe_isr(int irq, void *dev_id)
-{
-	struct vpfe_device *vpfe_dev = dev_id;
-	enum v4l2_field field;
-	int fid;
-
-	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "\nStarting vpfe_isr...\n");
-	field = vpfe_dev->fmt.fmt.pix.field;
-
-	/* if streaming not started, don't do anything */
-	if (!vpfe_dev->started)
-		goto clear_intr;
-
-	/* only for 6446 this will be applicable */
-	if (NULL != ccdc_dev->hw_ops.reset)
-		ccdc_dev->hw_ops.reset();
-
-	if (field == V4L2_FIELD_NONE) {
-		/* handle progressive frame capture */
-		v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev,
-			"frame format is progressive...\n");
-		if (vpfe_dev->cur_frm != vpfe_dev->next_frm)
-			vpfe_process_buffer_complete(vpfe_dev);
-		goto clear_intr;
-	}
-
-	/* interlaced or TB capture check which field we are in hardware */
-	fid = ccdc_dev->hw_ops.getfid();
-
-	/* switch the software maintained field id */
-	vpfe_dev->field_id ^= 1;
-	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "field id = %x:%x.\n",
-		fid, vpfe_dev->field_id);
-	if (fid == vpfe_dev->field_id) {
-		/* we are in-sync here,continue */
-		if (fid == 0) {
-			/*
-			 * One frame is just being captured. If the next frame
-			 * is available, release the current frame and move on
-			 */
-			if (vpfe_dev->cur_frm != vpfe_dev->next_frm)
-				vpfe_process_buffer_complete(vpfe_dev);
-			/*
-			 * based on whether the two fields are stored
-			 * interleavely or separately in memory, reconfigure
-			 * the CCDC memory address
-			 */
-			if (field == V4L2_FIELD_SEQ_TB) {
-				vpfe_schedule_bottom_field(vpfe_dev);
-			}
-			goto clear_intr;
-		}
-		/*
-		 * if one field is just being captured configure
-		 * the next frame get the next frame from the empty
-		 * queue if no frame is available hold on to the
-		 * current buffer
-		 */
-		spin_lock(&vpfe_dev->dma_queue_lock);
-		if (!list_empty(&vpfe_dev->dma_queue) &&
-		    vpfe_dev->cur_frm == vpfe_dev->next_frm)
-			vpfe_schedule_next_buffer(vpfe_dev);
-		spin_unlock(&vpfe_dev->dma_queue_lock);
-	} else if (fid == 0) {
-		/*
-		 * out of sync. Recover from any hardware out-of-sync.
-		 * May loose one frame
-		 */
-		vpfe_dev->field_id = fid;
-	}
-clear_intr:
-	if (vpfe_dev->cfg->clr_intr)
-		vpfe_dev->cfg->clr_intr(irq);
-
-	return IRQ_HANDLED;
-}
-
-/* vdint1_isr - isr handler for VINT1 interrupt */
-static irqreturn_t vdint1_isr(int irq, void *dev_id)
-{
-	struct vpfe_device *vpfe_dev = dev_id;
-
-	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "\nInside vdint1_isr...\n");
-
-	/* if streaming not started, don't do anything */
-	if (!vpfe_dev->started) {
-		if (vpfe_dev->cfg->clr_intr)
-			vpfe_dev->cfg->clr_intr(irq);
-		return IRQ_HANDLED;
-	}
-
-	spin_lock(&vpfe_dev->dma_queue_lock);
-	if ((vpfe_dev->fmt.fmt.pix.field == V4L2_FIELD_NONE) &&
-	    !list_empty(&vpfe_dev->dma_queue) &&
-	    vpfe_dev->cur_frm == vpfe_dev->next_frm)
-		vpfe_schedule_next_buffer(vpfe_dev);
-	spin_unlock(&vpfe_dev->dma_queue_lock);
-
-	if (vpfe_dev->cfg->clr_intr)
-		vpfe_dev->cfg->clr_intr(irq);
-
-	return IRQ_HANDLED;
-}
-
-static void vpfe_detach_irq(struct vpfe_device *vpfe_dev)
-{
-	enum ccdc_frmfmt frame_format;
-
-	frame_format = ccdc_dev->hw_ops.get_frame_format();
-	if (frame_format == CCDC_FRMFMT_PROGRESSIVE)
-		free_irq(vpfe_dev->ccdc_irq1, vpfe_dev);
-}
-
-static int vpfe_attach_irq(struct vpfe_device *vpfe_dev)
-{
-	enum ccdc_frmfmt frame_format;
-
-	frame_format = ccdc_dev->hw_ops.get_frame_format();
-	if (frame_format == CCDC_FRMFMT_PROGRESSIVE) {
-		return request_irq(vpfe_dev->ccdc_irq1, vdint1_isr,
-				    IRQF_DISABLED, "vpfe_capture1",
-				    vpfe_dev);
-	}
-	return 0;
-}
-
-/* vpfe_stop_ccdc_capture: stop streaming in ccdc/isif */
-static void vpfe_stop_ccdc_capture(struct vpfe_device *vpfe_dev)
-{
-	vpfe_dev->started = 0;
-	ccdc_dev->hw_ops.enable(0);
-	if (ccdc_dev->hw_ops.enable_out_to_sdram)
-		ccdc_dev->hw_ops.enable_out_to_sdram(0);
-}
-
-/*
- * vpfe_release : This function deletes buffer queue, frees the
- * buffers and the vpfe file  handle
- */
-static int vpfe_release(struct file *file)
-{
-	struct vpfe_device *vpfe_dev = video_drvdata(file);
-	struct vpfe_fh *fh = file->private_data;
-	struct vpfe_subdev_info *sdinfo;
-	int ret;
-
-	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_release\n");
-
-	/* Get the device lock */
-	mutex_lock(&vpfe_dev->lock);
-	/* if this instance is doing IO */
-	if (fh->io_allowed) {
-		if (vpfe_dev->started) {
-			sdinfo = vpfe_dev->current_subdev;
-			ret = v4l2_device_call_until_err(&vpfe_dev->v4l2_dev,
-							 sdinfo->grp_id,
-							 video, s_stream, 0);
-			if (ret && (ret != -ENOIOCTLCMD))
-				v4l2_err(&vpfe_dev->v4l2_dev,
-				"stream off failed in subdev\n");
-			vpfe_stop_ccdc_capture(vpfe_dev);
-			vpfe_detach_irq(vpfe_dev);
-			videobuf_streamoff(&vpfe_dev->buffer_queue);
-		}
-		vpfe_dev->io_usrs = 0;
-		vpfe_dev->numbuffers = config_params.numbuffers;
-	}
-
-	/* Decrement device usrs counter */
-	vpfe_dev->usrs--;
-	/* Close the priority */
-	v4l2_prio_close(&vpfe_dev->prio, fh->prio);
-	/* If this is the last file handle */
-	if (!vpfe_dev->usrs) {
-		vpfe_dev->initialized = 0;
-		if (ccdc_dev->hw_ops.close)
-			ccdc_dev->hw_ops.close(vpfe_dev->pdev);
-		module_put(ccdc_dev->owner);
-	}
-	mutex_unlock(&vpfe_dev->lock);
-	file->private_data = NULL;
-	/* Free memory allocated to file handle object */
-	kfree(fh);
-	return 0;
-}
-
-/*
- * vpfe_mmap : It is used to map kernel space buffers
- * into user spaces
- */
-static int vpfe_mmap(struct file *file, struct vm_area_struct *vma)
-{
-	/* Get the device object and file handle object */
-	struct vpfe_device *vpfe_dev = video_drvdata(file);
-
-	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_mmap\n");
-
-	return videobuf_mmap_mapper(&vpfe_dev->buffer_queue, vma);
-}
-
-/*
- * vpfe_poll: It is used for select/poll system call
- */
-static unsigned int vpfe_poll(struct file *file, poll_table *wait)
-{
-	struct vpfe_device *vpfe_dev = video_drvdata(file);
-
-	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_poll\n");
-
-	if (vpfe_dev->started)
-		return videobuf_poll_stream(file,
-					    &vpfe_dev->buffer_queue, wait);
-	return 0;
-}
-
-/* vpfe capture driver file operations */
-static const struct v4l2_file_operations vpfe_fops = {
-	.owner = THIS_MODULE,
-	.open = vpfe_open,
-	.release = vpfe_release,
-	.unlocked_ioctl = video_ioctl2,
-	.mmap = vpfe_mmap,
-	.poll = vpfe_poll
-};
-
-/*
- * vpfe_check_format()
- * This function adjust the input pixel format as per hardware
- * capabilities and update the same in pixfmt.
- * Following algorithm used :-
- *
- *	If given pixformat is not in the vpfe list of pix formats or not
- *	supported by the hardware, current value of pixformat in the device
- *	is used
- *	If given field is not supported, then current field is used. If field
- *	is different from current, then it is matched with that from sub device.
- *	Minimum height is 2 lines for interlaced or tb field and 1 line for
- *	progressive. Maximum height is clamped to active active lines of scan
- *	Minimum width is 32 bytes in memory and width is clamped to active
- *	pixels of scan.
- *	bytesperline is a multiple of 32.
- */
-static const struct vpfe_pixel_format *
-	vpfe_check_format(struct vpfe_device *vpfe_dev,
-			  struct v4l2_pix_format *pixfmt)
-{
-	u32 min_height = 1, min_width = 32, max_width, max_height;
-	const struct vpfe_pixel_format *vpfe_pix_fmt;
-	u32 pix;
-	int temp, found;
-
-	vpfe_pix_fmt = vpfe_lookup_pix_format(pixfmt->pixelformat);
-	if (NULL == vpfe_pix_fmt) {
-		/*
-		 * use current pixel format in the vpfe device. We
-		 * will find this pix format in the table
-		 */
-		pixfmt->pixelformat = vpfe_dev->fmt.fmt.pix.pixelformat;
-		vpfe_pix_fmt = vpfe_lookup_pix_format(pixfmt->pixelformat);
-	}
-
-	/* check if hw supports it */
-	temp = 0;
-	found = 0;
-	while (ccdc_dev->hw_ops.enum_pix(&pix, temp) >= 0) {
-		if (vpfe_pix_fmt->fmtdesc.pixelformat == pix) {
-			found = 1;
-			break;
-		}
-		temp++;
-	}
-
-	if (!found) {
-		/* use current pixel format */
-		pixfmt->pixelformat = vpfe_dev->fmt.fmt.pix.pixelformat;
-		/*
-		 * Since this is currently used in the vpfe device, we
-		 * will find this pix format in the table
-		 */
-		vpfe_pix_fmt = vpfe_lookup_pix_format(pixfmt->pixelformat);
-	}
-
-	/* check what field format is supported */
-	if (pixfmt->field == V4L2_FIELD_ANY) {
-		/* if field is any, use current value as default */
-		pixfmt->field = vpfe_dev->fmt.fmt.pix.field;
-	}
-
-	/*
-	 * if field is not same as current field in the vpfe device
-	 * try matching the field with the sub device field
-	 */
-	if (vpfe_dev->fmt.fmt.pix.field != pixfmt->field) {
-		/*
-		 * If field value is not in the supported fields, use current
-		 * field used in the device as default
-		 */
-		switch (pixfmt->field) {
-		case V4L2_FIELD_INTERLACED:
-		case V4L2_FIELD_SEQ_TB:
-			/* if sub device is supporting progressive, use that */
-			if (!vpfe_dev->std_info.frame_format)
-				pixfmt->field = V4L2_FIELD_NONE;
-			break;
-		case V4L2_FIELD_NONE:
-			if (vpfe_dev->std_info.frame_format)
-				pixfmt->field = V4L2_FIELD_INTERLACED;
-			break;
-
-		default:
-			/* use current field as default */
-			pixfmt->field = vpfe_dev->fmt.fmt.pix.field;
-			break;
-		}
-	}
-
-	/* Now adjust image resolutions supported */
-	if (pixfmt->field == V4L2_FIELD_INTERLACED ||
-	    pixfmt->field == V4L2_FIELD_SEQ_TB)
-		min_height = 2;
-
-	max_width = vpfe_dev->std_info.active_pixels;
-	max_height = vpfe_dev->std_info.active_lines;
-	min_width /= vpfe_pix_fmt->bpp;
-
-	v4l2_info(&vpfe_dev->v4l2_dev, "width = %d, height = %d, bpp = %d\n",
-		  pixfmt->width, pixfmt->height, vpfe_pix_fmt->bpp);
-
-	pixfmt->width = clamp((pixfmt->width), min_width, max_width);
-	pixfmt->height = clamp((pixfmt->height), min_height, max_height);
-
-	/* If interlaced, adjust height to be a multiple of 2 */
-	if (pixfmt->field == V4L2_FIELD_INTERLACED)
-		pixfmt->height &= (~1);
-	/*
-	 * recalculate bytesperline and sizeimage since width
-	 * and height might have changed
-	 */
-	pixfmt->bytesperline = (((pixfmt->width * vpfe_pix_fmt->bpp) + 31)
-				& ~31);
-	if (pixfmt->pixelformat == V4L2_PIX_FMT_NV12)
-		pixfmt->sizeimage =
-			pixfmt->bytesperline * pixfmt->height +
-			((pixfmt->bytesperline * pixfmt->height) >> 1);
-	else
-		pixfmt->sizeimage = pixfmt->bytesperline * pixfmt->height;
-
-	v4l2_info(&vpfe_dev->v4l2_dev, "adjusted width = %d, height ="
-		 " %d, bpp = %d, bytesperline = %d, sizeimage = %d\n",
-		 pixfmt->width, pixfmt->height, vpfe_pix_fmt->bpp,
-		 pixfmt->bytesperline, pixfmt->sizeimage);
-	return vpfe_pix_fmt;
-}
-
-static int vpfe_querycap(struct file *file, void  *priv,
-			       struct v4l2_capability *cap)
-{
-	struct vpfe_device *vpfe_dev = video_drvdata(file);
-
-	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_querycap\n");
-
-	cap->version = VPFE_CAPTURE_VERSION_CODE;
-	cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING;
-	strlcpy(cap->driver, CAPTURE_DRV_NAME, sizeof(cap->driver));
-	strlcpy(cap->bus_info, "VPFE", sizeof(cap->bus_info));
-	strlcpy(cap->card, vpfe_dev->cfg->card_name, sizeof(cap->card));
-	return 0;
-}
-
-static int vpfe_g_fmt_vid_cap(struct file *file, void *priv,
-				struct v4l2_format *fmt)
-{
-	struct vpfe_device *vpfe_dev = video_drvdata(file);
-	int ret = 0;
-
-	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_g_fmt_vid_cap\n");
-	/* Fill in the information about format */
-	*fmt = vpfe_dev->fmt;
-	return ret;
-}
-
-static int vpfe_enum_fmt_vid_cap(struct file *file, void  *priv,
-				   struct v4l2_fmtdesc *fmt)
-{
-	struct vpfe_device *vpfe_dev = video_drvdata(file);
-	const struct vpfe_pixel_format *pix_fmt;
-	int temp_index;
-	u32 pix;
-
-	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_enum_fmt_vid_cap\n");
-
-	if (ccdc_dev->hw_ops.enum_pix(&pix, fmt->index) < 0)
-		return -EINVAL;
-
-	/* Fill in the information about format */
-	pix_fmt = vpfe_lookup_pix_format(pix);
-	if (NULL != pix_fmt) {
-		temp_index = fmt->index;
-		*fmt = pix_fmt->fmtdesc;
-		fmt->index = temp_index;
-		return 0;
-	}
-	return -EINVAL;
-}
-
-static int vpfe_s_fmt_vid_cap(struct file *file, void *priv,
-				struct v4l2_format *fmt)
-{
-	struct vpfe_device *vpfe_dev = video_drvdata(file);
-	const struct vpfe_pixel_format *pix_fmts;
-	int ret = 0;
-
-	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_s_fmt_vid_cap\n");
-
-	/* If streaming is started, return error */
-	if (vpfe_dev->started) {
-		v4l2_err(&vpfe_dev->v4l2_dev, "Streaming is started\n");
-		return -EBUSY;
-	}
-
-	/* Check for valid frame format */
-	pix_fmts = vpfe_check_format(vpfe_dev, &fmt->fmt.pix);
-
-	if (NULL == pix_fmts)
-		return -EINVAL;
-
-	/* store the pixel format in the device  object */
-	ret = mutex_lock_interruptible(&vpfe_dev->lock);
-	if (ret)
-		return ret;
-
-	/* First detach any IRQ if currently attached */
-	vpfe_detach_irq(vpfe_dev);
-	vpfe_dev->fmt = *fmt;
-	/* set image capture parameters in the ccdc */
-	ret = vpfe_config_ccdc_image_format(vpfe_dev);
-	mutex_unlock(&vpfe_dev->lock);
-	return ret;
-}
-
-static int vpfe_try_fmt_vid_cap(struct file *file, void *priv,
-				  struct v4l2_format *f)
-{
-	struct vpfe_device *vpfe_dev = video_drvdata(file);
-	const struct vpfe_pixel_format *pix_fmts;
-
-	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_try_fmt_vid_cap\n");
-
-	pix_fmts = vpfe_check_format(vpfe_dev, &f->fmt.pix);
-	if (NULL == pix_fmts)
-		return -EINVAL;
-	return 0;
-}
-
-/*
- * vpfe_get_subdev_input_index - Get subdev index and subdev input index for a
- * given app input index
- */
-static int vpfe_get_subdev_input_index(struct vpfe_device *vpfe_dev,
-					int *subdev_index,
-					int *subdev_input_index,
-					int app_input_index)
-{
-	struct vpfe_config *cfg = vpfe_dev->cfg;
-	struct vpfe_subdev_info *sdinfo;
-	int i, j = 0;
-
-	for (i = 0; i < cfg->num_subdevs; i++) {
-		sdinfo = &cfg->sub_devs[i];
-		if (app_input_index < (j + sdinfo->num_inputs)) {
-			*subdev_index = i;
-			*subdev_input_index = app_input_index - j;
-			return 0;
-		}
-		j += sdinfo->num_inputs;
-	}
-	return -EINVAL;
-}
-
-/*
- * vpfe_get_app_input - Get app input index for a given subdev input index
- * driver stores the input index of the current sub device and translate it
- * when application request the current input
- */
-static int vpfe_get_app_input_index(struct vpfe_device *vpfe_dev,
-				    int *app_input_index)
-{
-	struct vpfe_config *cfg = vpfe_dev->cfg;
-	struct vpfe_subdev_info *sdinfo;
-	int i, j = 0;
-
-	for (i = 0; i < cfg->num_subdevs; i++) {
-		sdinfo = &cfg->sub_devs[i];
-		if (!strcmp(sdinfo->name, vpfe_dev->current_subdev->name)) {
-			if (vpfe_dev->current_input >= sdinfo->num_inputs)
-				return -1;
-			*app_input_index = j + vpfe_dev->current_input;
-			return 0;
-		}
-		j += sdinfo->num_inputs;
-	}
-	return -EINVAL;
-}
-
-static int vpfe_enum_input(struct file *file, void *priv,
-				 struct v4l2_input *inp)
-{
-	struct vpfe_device *vpfe_dev = video_drvdata(file);
-	struct vpfe_subdev_info *sdinfo;
-	int subdev, index ;
-
-	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_enum_input\n");
-
-	if (vpfe_get_subdev_input_index(vpfe_dev,
-					&subdev,
-					&index,
-					inp->index) < 0) {
-		v4l2_err(&vpfe_dev->v4l2_dev, "input information not found"
-			 " for the subdev\n");
-		return -EINVAL;
-	}
-	sdinfo = &vpfe_dev->cfg->sub_devs[subdev];
-	memcpy(inp, &sdinfo->inputs[index], sizeof(struct v4l2_input));
-	return 0;
-}
-
-static int vpfe_g_input(struct file *file, void *priv, unsigned int *index)
-{
-	struct vpfe_device *vpfe_dev = video_drvdata(file);
-
-	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_g_input\n");
-
-	return vpfe_get_app_input_index(vpfe_dev, index);
-}
-
-
-static int vpfe_s_input(struct file *file, void *priv, unsigned int index)
-{
-	struct vpfe_device *vpfe_dev = video_drvdata(file);
-	struct vpfe_subdev_info *sdinfo;
-	int subdev_index, inp_index;
-	struct vpfe_route *route;
-	u32 input = 0, output = 0;
-	int ret = -EINVAL;
-
-	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_s_input\n");
-
-	ret = mutex_lock_interruptible(&vpfe_dev->lock);
-	if (ret)
-		return ret;
-
-	/*
-	 * If streaming is started return device busy
-	 * error
-	 */
-	if (vpfe_dev->started) {
-		v4l2_err(&vpfe_dev->v4l2_dev, "Streaming is on\n");
-		ret = -EBUSY;
-		goto unlock_out;
-	}
-
-	if (vpfe_get_subdev_input_index(vpfe_dev,
-					&subdev_index,
-					&inp_index,
-					index) < 0) {
-		v4l2_err(&vpfe_dev->v4l2_dev, "invalid input index\n");
-		goto unlock_out;
-	}
-
-	sdinfo = &vpfe_dev->cfg->sub_devs[subdev_index];
-	route = &sdinfo->routes[inp_index];
-	if (route && sdinfo->can_route) {
-		input = route->input;
-		output = route->output;
-	}
-
-	ret = v4l2_device_call_until_err(&vpfe_dev->v4l2_dev, sdinfo->grp_id,
-					 video, s_routing, input, output, 0);
-
-	if (ret) {
-		v4l2_err(&vpfe_dev->v4l2_dev,
-			"vpfe_doioctl:error in setting input in decoder\n");
-		ret = -EINVAL;
-		goto unlock_out;
-	}
-	vpfe_dev->current_subdev = sdinfo;
-	vpfe_dev->current_input = index;
-	vpfe_dev->std_index = 0;
-
-	/* set the bus/interface parameter for the sub device in ccdc */
-	ret = ccdc_dev->hw_ops.set_hw_if_params(&sdinfo->ccdc_if_params);
-	if (ret)
-		goto unlock_out;
-
-	/* set the default image parameters in the device */
-	ret = vpfe_config_image_format(vpfe_dev,
-				&vpfe_standards[vpfe_dev->std_index].std_id);
-unlock_out:
-	mutex_unlock(&vpfe_dev->lock);
-	return ret;
-}
-
-static int vpfe_querystd(struct file *file, void *priv, v4l2_std_id *std_id)
-{
-	struct vpfe_device *vpfe_dev = video_drvdata(file);
-	struct vpfe_subdev_info *sdinfo;
-	int ret = 0;
-
-	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_querystd\n");
-
-	ret = mutex_lock_interruptible(&vpfe_dev->lock);
-	sdinfo = vpfe_dev->current_subdev;
-	if (ret)
-		return ret;
-	/* Call querystd function of decoder device */
-	ret = v4l2_device_call_until_err(&vpfe_dev->v4l2_dev, sdinfo->grp_id,
-					 video, querystd, std_id);
-	mutex_unlock(&vpfe_dev->lock);
-	return ret;
-}
-
-static int vpfe_s_std(struct file *file, void *priv, v4l2_std_id *std_id)
-{
-	struct vpfe_device *vpfe_dev = video_drvdata(file);
-	struct vpfe_subdev_info *sdinfo;
-	int ret = 0;
-
-	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_s_std\n");
-
-	/* Call decoder driver function to set the standard */
-	ret = mutex_lock_interruptible(&vpfe_dev->lock);
-	if (ret)
-		return ret;
-
-	sdinfo = vpfe_dev->current_subdev;
-	/* If streaming is started, return device busy error */
-	if (vpfe_dev->started) {
-		v4l2_err(&vpfe_dev->v4l2_dev, "streaming is started\n");
-		ret = -EBUSY;
-		goto unlock_out;
-	}
-
-	ret = v4l2_device_call_until_err(&vpfe_dev->v4l2_dev, sdinfo->grp_id,
-					 core, s_std, *std_id);
-	if (ret < 0) {
-		v4l2_err(&vpfe_dev->v4l2_dev, "Failed to set standard\n");
-		goto unlock_out;
-	}
-	ret = vpfe_config_image_format(vpfe_dev, std_id);
-
-unlock_out:
-	mutex_unlock(&vpfe_dev->lock);
-	return ret;
-}
-
-static int vpfe_g_std(struct file *file, void *priv, v4l2_std_id *std_id)
-{
-	struct vpfe_device *vpfe_dev = video_drvdata(file);
-
-	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_g_std\n");
-
-	*std_id = vpfe_standards[vpfe_dev->std_index].std_id;
-	return 0;
-}
-/*
- *  Videobuf operations
- */
-static int vpfe_videobuf_setup(struct videobuf_queue *vq,
-				unsigned int *count,
-				unsigned int *size)
-{
-	struct vpfe_fh *fh = vq->priv_data;
-	struct vpfe_device *vpfe_dev = fh->vpfe_dev;
-
-	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_buffer_setup\n");
-	*size = vpfe_dev->fmt.fmt.pix.sizeimage;
-	if (vpfe_dev->memory == V4L2_MEMORY_MMAP &&
-		vpfe_dev->fmt.fmt.pix.sizeimage > config_params.device_bufsize)
-		*size = config_params.device_bufsize;
-
-	if (*count < config_params.min_numbuffers)
-		*count = config_params.min_numbuffers;
-	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev,
-		"count=%d, size=%d\n", *count, *size);
-	return 0;
-}
-
-static int vpfe_videobuf_prepare(struct videobuf_queue *vq,
-				struct videobuf_buffer *vb,
-				enum v4l2_field field)
-{
-	struct vpfe_fh *fh = vq->priv_data;
-	struct vpfe_device *vpfe_dev = fh->vpfe_dev;
-	unsigned long addr;
-	int ret;
-
-	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_buffer_prepare\n");
-
-	/* If buffer is not initialized, initialize it */
-	if (VIDEOBUF_NEEDS_INIT == vb->state) {
-		vb->width = vpfe_dev->fmt.fmt.pix.width;
-		vb->height = vpfe_dev->fmt.fmt.pix.height;
-		vb->size = vpfe_dev->fmt.fmt.pix.sizeimage;
-		vb->field = field;
-
-		ret = videobuf_iolock(vq, vb, NULL);
-		if (ret < 0)
-			return ret;
-
-		addr = videobuf_to_dma_contig(vb);
-		/* Make sure user addresses are aligned to 32 bytes */
-		if (!ALIGN(addr, 32))
-			return -EINVAL;
-
-		vb->state = VIDEOBUF_PREPARED;
-	}
-	return 0;
-}
-
-static void vpfe_videobuf_queue(struct videobuf_queue *vq,
-				struct videobuf_buffer *vb)
-{
-	/* Get the file handle object and device object */
-	struct vpfe_fh *fh = vq->priv_data;
-	struct vpfe_device *vpfe_dev = fh->vpfe_dev;
-	unsigned long flags;
-
-	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_buffer_queue\n");
-
-	/* add the buffer to the DMA queue */
-	spin_lock_irqsave(&vpfe_dev->dma_queue_lock, flags);
-	list_add_tail(&vb->queue, &vpfe_dev->dma_queue);
-	spin_unlock_irqrestore(&vpfe_dev->dma_queue_lock, flags);
-
-	/* Change state of the buffer */
-	vb->state = VIDEOBUF_QUEUED;
-}
-
-static void vpfe_videobuf_release(struct videobuf_queue *vq,
-				  struct videobuf_buffer *vb)
-{
-	struct vpfe_fh *fh = vq->priv_data;
-	struct vpfe_device *vpfe_dev = fh->vpfe_dev;
-	unsigned long flags;
-
-	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_videobuf_release\n");
-
-	/*
-	 * We need to flush the buffer from the dma queue since
-	 * they are de-allocated
-	 */
-	spin_lock_irqsave(&vpfe_dev->dma_queue_lock, flags);
-	INIT_LIST_HEAD(&vpfe_dev->dma_queue);
-	spin_unlock_irqrestore(&vpfe_dev->dma_queue_lock, flags);
-	videobuf_dma_contig_free(vq, vb);
-	vb->state = VIDEOBUF_NEEDS_INIT;
-}
-
-static struct videobuf_queue_ops vpfe_videobuf_qops = {
-	.buf_setup      = vpfe_videobuf_setup,
-	.buf_prepare    = vpfe_videobuf_prepare,
-	.buf_queue      = vpfe_videobuf_queue,
-	.buf_release    = vpfe_videobuf_release,
-};
-
-/*
- * vpfe_reqbufs. currently support REQBUF only once opening
- * the device.
- */
-static int vpfe_reqbufs(struct file *file, void *priv,
-			struct v4l2_requestbuffers *req_buf)
-{
-	struct vpfe_device *vpfe_dev = video_drvdata(file);
-	struct vpfe_fh *fh = file->private_data;
-	int ret = 0;
-
-	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_reqbufs\n");
-
-	if (V4L2_BUF_TYPE_VIDEO_CAPTURE != req_buf->type) {
-		v4l2_err(&vpfe_dev->v4l2_dev, "Invalid buffer type\n");
-		return -EINVAL;
-	}
-
-	ret = mutex_lock_interruptible(&vpfe_dev->lock);
-	if (ret)
-		return ret;
-
-	if (vpfe_dev->io_usrs != 0) {
-		v4l2_err(&vpfe_dev->v4l2_dev, "Only one IO user allowed\n");
-		ret = -EBUSY;
-		goto unlock_out;
-	}
-
-	vpfe_dev->memory = req_buf->memory;
-	videobuf_queue_dma_contig_init(&vpfe_dev->buffer_queue,
-				&vpfe_videobuf_qops,
-				vpfe_dev->pdev,
-				&vpfe_dev->irqlock,
-				req_buf->type,
-				vpfe_dev->fmt.fmt.pix.field,
-				sizeof(struct videobuf_buffer),
-				fh, NULL);
-
-	fh->io_allowed = 1;
-	vpfe_dev->io_usrs = 1;
-	INIT_LIST_HEAD(&vpfe_dev->dma_queue);
-	ret = videobuf_reqbufs(&vpfe_dev->buffer_queue, req_buf);
-unlock_out:
-	mutex_unlock(&vpfe_dev->lock);
-	return ret;
-}
-
-static int vpfe_querybuf(struct file *file, void *priv,
-			 struct v4l2_buffer *buf)
-{
-	struct vpfe_device *vpfe_dev = video_drvdata(file);
-
-	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_querybuf\n");
-
-	if (V4L2_BUF_TYPE_VIDEO_CAPTURE != buf->type) {
-		v4l2_err(&vpfe_dev->v4l2_dev, "Invalid buf type\n");
-		return  -EINVAL;
-	}
-
-	if (vpfe_dev->memory != V4L2_MEMORY_MMAP) {
-		v4l2_err(&vpfe_dev->v4l2_dev, "Invalid memory\n");
-		return -EINVAL;
-	}
-	/* Call videobuf_querybuf to get information */
-	return videobuf_querybuf(&vpfe_dev->buffer_queue, buf);
-}
-
-static int vpfe_qbuf(struct file *file, void *priv,
-		     struct v4l2_buffer *p)
-{
-	struct vpfe_device *vpfe_dev = video_drvdata(file);
-	struct vpfe_fh *fh = file->private_data;
-
-	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_qbuf\n");
-
-	if (V4L2_BUF_TYPE_VIDEO_CAPTURE != p->type) {
-		v4l2_err(&vpfe_dev->v4l2_dev, "Invalid buf type\n");
-		return -EINVAL;
-	}
-
-	/*
-	 * If this file handle is not allowed to do IO,
-	 * return error
-	 */
-	if (!fh->io_allowed) {
-		v4l2_err(&vpfe_dev->v4l2_dev, "fh->io_allowed\n");
-		return -EACCES;
-	}
-	return videobuf_qbuf(&vpfe_dev->buffer_queue, p);
-}
-
-static int vpfe_dqbuf(struct file *file, void *priv,
-		      struct v4l2_buffer *buf)
-{
-	struct vpfe_device *vpfe_dev = video_drvdata(file);
-
-	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_dqbuf\n");
-
-	if (V4L2_BUF_TYPE_VIDEO_CAPTURE != buf->type) {
-		v4l2_err(&vpfe_dev->v4l2_dev, "Invalid buf type\n");
-		return -EINVAL;
-	}
-	return videobuf_dqbuf(&vpfe_dev->buffer_queue,
-				      buf, file->f_flags & O_NONBLOCK);
-}
-
-static int vpfe_queryctrl(struct file *file, void *priv,
-		struct v4l2_queryctrl *qctrl)
-{
-	struct vpfe_device *vpfe_dev = video_drvdata(file);
-	struct vpfe_subdev_info *sdinfo;
-
-	sdinfo = vpfe_dev->current_subdev;
-
-	return v4l2_device_call_until_err(&vpfe_dev->v4l2_dev, sdinfo->grp_id,
-					 core, queryctrl, qctrl);
-
-}
-
-static int vpfe_g_ctrl(struct file *file, void *priv, struct v4l2_control *ctrl)
-{
-	struct vpfe_device *vpfe_dev = video_drvdata(file);
-	struct vpfe_subdev_info *sdinfo;
-
-	sdinfo = vpfe_dev->current_subdev;
-
-	return v4l2_device_call_until_err(&vpfe_dev->v4l2_dev, sdinfo->grp_id,
-					 core, g_ctrl, ctrl);
-}
-
-static int vpfe_s_ctrl(struct file *file, void *priv, struct v4l2_control *ctrl)
-{
-	struct vpfe_device *vpfe_dev = video_drvdata(file);
-	struct vpfe_subdev_info *sdinfo;
-
-	sdinfo = vpfe_dev->current_subdev;
-
-	return v4l2_device_call_until_err(&vpfe_dev->v4l2_dev, sdinfo->grp_id,
-					 core, s_ctrl, ctrl);
-}
-
-/*
- * vpfe_calculate_offsets : This function calculates buffers offset
- * for top and bottom field
- */
-static void vpfe_calculate_offsets(struct vpfe_device *vpfe_dev)
-{
-	struct v4l2_rect image_win;
-
-	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_calculate_offsets\n");
-
-	ccdc_dev->hw_ops.get_image_window(&image_win);
-	vpfe_dev->field_off = image_win.height * image_win.width;
-}
-
-/* vpfe_start_ccdc_capture: start streaming in ccdc/isif */
-static void vpfe_start_ccdc_capture(struct vpfe_device *vpfe_dev)
-{
-	ccdc_dev->hw_ops.enable(1);
-	if (ccdc_dev->hw_ops.enable_out_to_sdram)
-		ccdc_dev->hw_ops.enable_out_to_sdram(1);
-	vpfe_dev->started = 1;
-}
-
-/*
- * vpfe_streamon. Assume the DMA queue is not empty.
- * application is expected to call QBUF before calling
- * this ioctl. If not, driver returns error
- */
-static int vpfe_streamon(struct file *file, void *priv,
-			 enum v4l2_buf_type buf_type)
-{
-	struct vpfe_device *vpfe_dev = video_drvdata(file);
-	struct vpfe_fh *fh = file->private_data;
-	struct vpfe_subdev_info *sdinfo;
-	unsigned long addr;
-	int ret = 0;
-
-	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_streamon\n");
-
-	if (V4L2_BUF_TYPE_VIDEO_CAPTURE != buf_type) {
-		v4l2_err(&vpfe_dev->v4l2_dev, "Invalid buf type\n");
-		return -EINVAL;
-	}
-
-	/* If file handle is not allowed IO, return error */
-	if (!fh->io_allowed) {
-		v4l2_err(&vpfe_dev->v4l2_dev, "fh->io_allowed\n");
-		return -EACCES;
-	}
-
-	sdinfo = vpfe_dev->current_subdev;
-	ret = v4l2_device_call_until_err(&vpfe_dev->v4l2_dev, sdinfo->grp_id,
-					video, s_stream, 1);
-
-	if (ret && (ret != -ENOIOCTLCMD)) {
-		v4l2_err(&vpfe_dev->v4l2_dev, "stream on failed in subdev\n");
-		return -EINVAL;
-	}
-
-	/* If buffer queue is empty, return error */
-	if (list_empty(&vpfe_dev->buffer_queue.stream)) {
-		v4l2_err(&vpfe_dev->v4l2_dev, "buffer queue is empty\n");
-		return -EIO;
-	}
-
-	/* Call videobuf_streamon to start streaming * in videobuf */
-	ret = videobuf_streamon(&vpfe_dev->buffer_queue);
-	if (ret)
-		return ret;
-
-
-	ret = mutex_lock_interruptible(&vpfe_dev->lock);
-	if (ret)
-		goto streamoff;
-	/* Get the next frame from the buffer queue */
-	vpfe_dev->next_frm = list_entry(vpfe_dev->dma_queue.next,
-					struct videobuf_buffer, queue);
-	vpfe_dev->cur_frm = vpfe_dev->next_frm;
-	/* Remove buffer from the buffer queue */
-	list_del(&vpfe_dev->cur_frm->queue);
-	/* Mark state of the current frame to active */
-	vpfe_dev->cur_frm->state = VIDEOBUF_ACTIVE;
-	/* Initialize field_id and started member */
-	vpfe_dev->field_id = 0;
-	addr = videobuf_to_dma_contig(vpfe_dev->cur_frm);
-
-	/* Calculate field offset */
-	vpfe_calculate_offsets(vpfe_dev);
-
-	if (vpfe_attach_irq(vpfe_dev) < 0) {
-		v4l2_err(&vpfe_dev->v4l2_dev,
-			 "Error in attaching interrupt handle\n");
-		ret = -EFAULT;
-		goto unlock_out;
-	}
-	if (ccdc_dev->hw_ops.configure() < 0) {
-		v4l2_err(&vpfe_dev->v4l2_dev,
-			 "Error in configuring ccdc\n");
-		ret = -EINVAL;
-		goto unlock_out;
-	}
-	ccdc_dev->hw_ops.setfbaddr((unsigned long)(addr));
-	vpfe_start_ccdc_capture(vpfe_dev);
-	mutex_unlock(&vpfe_dev->lock);
-	return ret;
-unlock_out:
-	mutex_unlock(&vpfe_dev->lock);
-streamoff:
-	ret = videobuf_streamoff(&vpfe_dev->buffer_queue);
-	return ret;
-}
-
-static int vpfe_streamoff(struct file *file, void *priv,
-			  enum v4l2_buf_type buf_type)
-{
-	struct vpfe_device *vpfe_dev = video_drvdata(file);
-	struct vpfe_fh *fh = file->private_data;
-	struct vpfe_subdev_info *sdinfo;
-	int ret = 0;
-
-	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_streamoff\n");
-
-	if (V4L2_BUF_TYPE_VIDEO_CAPTURE != buf_type) {
-		v4l2_err(&vpfe_dev->v4l2_dev, "Invalid buf type\n");
-		return -EINVAL;
-	}
-
-	/* If io is allowed for this file handle, return error */
-	if (!fh->io_allowed) {
-		v4l2_err(&vpfe_dev->v4l2_dev, "fh->io_allowed\n");
-		return -EACCES;
-	}
-
-	/* If streaming is not started, return error */
-	if (!vpfe_dev->started) {
-		v4l2_err(&vpfe_dev->v4l2_dev, "device started\n");
-		return -EINVAL;
-	}
-
-	ret = mutex_lock_interruptible(&vpfe_dev->lock);
-	if (ret)
-		return ret;
-
-	vpfe_stop_ccdc_capture(vpfe_dev);
-	vpfe_detach_irq(vpfe_dev);
-
-	sdinfo = vpfe_dev->current_subdev;
-	ret = v4l2_device_call_until_err(&vpfe_dev->v4l2_dev, sdinfo->grp_id,
-					video, s_stream, 0);
-
-	if (ret && (ret != -ENOIOCTLCMD))
-		v4l2_err(&vpfe_dev->v4l2_dev, "stream off failed in subdev\n");
-	ret = videobuf_streamoff(&vpfe_dev->buffer_queue);
-	mutex_unlock(&vpfe_dev->lock);
-	return ret;
-}
-
-static int vpfe_cropcap(struct file *file, void *priv,
-			      struct v4l2_cropcap *crop)
-{
-	struct vpfe_device *vpfe_dev = video_drvdata(file);
-
-	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_cropcap\n");
-
-	if (vpfe_dev->std_index >= ARRAY_SIZE(vpfe_standards))
-		return -EINVAL;
-
-	memset(crop, 0, sizeof(struct v4l2_cropcap));
-	crop->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
-	crop->bounds.width = crop->defrect.width =
-		vpfe_standards[vpfe_dev->std_index].width;
-	crop->bounds.height = crop->defrect.height =
-		vpfe_standards[vpfe_dev->std_index].height;
-	crop->pixelaspect = vpfe_standards[vpfe_dev->std_index].pixelaspect;
-	return 0;
-}
-
-static int vpfe_g_crop(struct file *file, void *priv,
-			     struct v4l2_crop *crop)
-{
-	struct vpfe_device *vpfe_dev = video_drvdata(file);
-
-	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_g_crop\n");
-
-	crop->c = vpfe_dev->crop;
-	return 0;
-}
-
-static int vpfe_s_crop(struct file *file, void *priv,
-			     struct v4l2_crop *crop)
-{
-	struct vpfe_device *vpfe_dev = video_drvdata(file);
-	int ret = 0;
-
-	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_s_crop\n");
-
-	if (vpfe_dev->started) {
-		/* make sure streaming is not started */
-		v4l2_err(&vpfe_dev->v4l2_dev,
-			"Cannot change crop when streaming is ON\n");
-		return -EBUSY;
-	}
-
-	ret = mutex_lock_interruptible(&vpfe_dev->lock);
-	if (ret)
-		return ret;
-
-	if (crop->c.top < 0 || crop->c.left < 0) {
-		v4l2_err(&vpfe_dev->v4l2_dev,
-			"doesn't support negative values for top & left\n");
-		ret = -EINVAL;
-		goto unlock_out;
-	}
-
-	/* adjust the width to 16 pixel boundary */
-	crop->c.width = ((crop->c.width + 15) & ~0xf);
-
-	/* make sure parameters are valid */
-	if ((crop->c.left + crop->c.width >
-		vpfe_dev->std_info.active_pixels) ||
-	    (crop->c.top + crop->c.height >
-		vpfe_dev->std_info.active_lines)) {
-		v4l2_err(&vpfe_dev->v4l2_dev, "Error in S_CROP params\n");
-		ret = -EINVAL;
-		goto unlock_out;
-	}
-	ccdc_dev->hw_ops.set_image_window(&crop->c);
-	vpfe_dev->fmt.fmt.pix.width = crop->c.width;
-	vpfe_dev->fmt.fmt.pix.height = crop->c.height;
-	vpfe_dev->fmt.fmt.pix.bytesperline =
-		ccdc_dev->hw_ops.get_line_length();
-	vpfe_dev->fmt.fmt.pix.sizeimage =
-		vpfe_dev->fmt.fmt.pix.bytesperline *
-		vpfe_dev->fmt.fmt.pix.height;
-	vpfe_dev->crop = crop->c;
-unlock_out:
-	mutex_unlock(&vpfe_dev->lock);
-	return ret;
-}
-
-
-static long vpfe_param_handler(struct file *file, void *priv,
-		bool valid_prio, int cmd, void *param)
-{
-	struct vpfe_device *vpfe_dev = video_drvdata(file);
-	int ret = 0;
-
-	v4l2_dbg(2, debug, &vpfe_dev->v4l2_dev, "vpfe_param_handler\n");
-
-	if (vpfe_dev->started) {
-		/* only allowed if streaming is not started */
-		v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev,
-			"device already started\n");
-		return -EBUSY;
-	}
-
-	ret = mutex_lock_interruptible(&vpfe_dev->lock);
-	if (ret)
-		return ret;
-
-	switch (cmd) {
-	case VPFE_CMD_S_CCDC_RAW_PARAMS:
-		v4l2_warn(&vpfe_dev->v4l2_dev,
-			  "VPFE_CMD_S_CCDC_RAW_PARAMS: experimental ioctl\n");
-		if (ccdc_dev->hw_ops.set_params) {
-			ret = ccdc_dev->hw_ops.set_params(param);
-			if (ret) {
-				v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev,
-					"Error setting parameters in CCDC\n");
-				goto unlock_out;
-			}
-			if (vpfe_get_ccdc_image_format(vpfe_dev,
-						       &vpfe_dev->fmt) < 0) {
-				v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev,
-					"Invalid image format at CCDC\n");
-				goto unlock_out;
-			}
-		} else {
-			ret = -EINVAL;
-			v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev,
-				"VPFE_CMD_S_CCDC_RAW_PARAMS not supported\n");
-		}
-		break;
-	default:
-		ret = -ENOTTY;
-	}
-unlock_out:
-	mutex_unlock(&vpfe_dev->lock);
-	return ret;
-}
-
-
-/* vpfe capture ioctl operations */
-static const struct v4l2_ioctl_ops vpfe_ioctl_ops = {
-	.vidioc_querycap	 = vpfe_querycap,
-	.vidioc_g_fmt_vid_cap    = vpfe_g_fmt_vid_cap,
-	.vidioc_enum_fmt_vid_cap = vpfe_enum_fmt_vid_cap,
-	.vidioc_s_fmt_vid_cap    = vpfe_s_fmt_vid_cap,
-	.vidioc_try_fmt_vid_cap  = vpfe_try_fmt_vid_cap,
-	.vidioc_enum_input	 = vpfe_enum_input,
-	.vidioc_g_input		 = vpfe_g_input,
-	.vidioc_s_input		 = vpfe_s_input,
-	.vidioc_querystd	 = vpfe_querystd,
-	.vidioc_s_std		 = vpfe_s_std,
-	.vidioc_g_std		 = vpfe_g_std,
-	.vidioc_queryctrl	 = vpfe_queryctrl,
-	.vidioc_g_ctrl		 = vpfe_g_ctrl,
-	.vidioc_s_ctrl		 = vpfe_s_ctrl,
-	.vidioc_reqbufs		 = vpfe_reqbufs,
-	.vidioc_querybuf	 = vpfe_querybuf,
-	.vidioc_qbuf		 = vpfe_qbuf,
-	.vidioc_dqbuf		 = vpfe_dqbuf,
-	.vidioc_streamon	 = vpfe_streamon,
-	.vidioc_streamoff	 = vpfe_streamoff,
-	.vidioc_cropcap		 = vpfe_cropcap,
-	.vidioc_g_crop		 = vpfe_g_crop,
-	.vidioc_s_crop		 = vpfe_s_crop,
-	.vidioc_default		 = vpfe_param_handler,
-};
-
-static struct vpfe_device *vpfe_initialize(void)
-{
-	struct vpfe_device *vpfe_dev;
-
-	/* Default number of buffers should be 3 */
-	if ((numbuffers > 0) &&
-	    (numbuffers < config_params.min_numbuffers))
-		numbuffers = config_params.min_numbuffers;
-
-	/*
-	 * Set buffer size to min buffers size if invalid buffer size is
-	 * given
-	 */
-	if (bufsize < config_params.min_bufsize)
-		bufsize = config_params.min_bufsize;
-
-	config_params.numbuffers = numbuffers;
-
-	if (numbuffers)
-		config_params.device_bufsize = bufsize;
-
-	/* Allocate memory for device objects */
-	vpfe_dev = kzalloc(sizeof(*vpfe_dev), GFP_KERNEL);
-
-	return vpfe_dev;
-}
-
-/*
- * vpfe_probe : This function creates device entries by register
- * itself to the V4L2 driver and initializes fields of each
- * device objects
- */
-static __devinit int vpfe_probe(struct platform_device *pdev)
-{
-	struct vpfe_subdev_info *sdinfo;
-	struct vpfe_config *vpfe_cfg;
-	struct resource *res1;
-	struct vpfe_device *vpfe_dev;
-	struct i2c_adapter *i2c_adap;
-	struct video_device *vfd;
-	int ret = -ENOMEM, i, j;
-	int num_subdevs = 0;
-
-	/* Get the pointer to the device object */
-	vpfe_dev = vpfe_initialize();
-
-	if (!vpfe_dev) {
-		v4l2_err(pdev->dev.driver,
-			"Failed to allocate memory for vpfe_dev\n");
-		return ret;
-	}
-
-	vpfe_dev->pdev = &pdev->dev;
-
-	if (NULL == pdev->dev.platform_data) {
-		v4l2_err(pdev->dev.driver, "Unable to get vpfe config\n");
-		ret = -ENODEV;
-		goto probe_free_dev_mem;
-	}
-
-	vpfe_cfg = pdev->dev.platform_data;
-	vpfe_dev->cfg = vpfe_cfg;
-	if (NULL == vpfe_cfg->ccdc ||
-	    NULL == vpfe_cfg->card_name ||
-	    NULL == vpfe_cfg->sub_devs) {
-		v4l2_err(pdev->dev.driver, "null ptr in vpfe_cfg\n");
-		ret = -ENOENT;
-		goto probe_free_dev_mem;
-	}
-
-	/* Allocate memory for ccdc configuration */
-	ccdc_cfg = kmalloc(sizeof(struct ccdc_config), GFP_KERNEL);
-	if (NULL == ccdc_cfg) {
-		v4l2_err(pdev->dev.driver,
-			 "Memory allocation failed for ccdc_cfg\n");
-		goto probe_free_lock;
-	}
-
-	mutex_lock(&ccdc_lock);
-
-	strncpy(ccdc_cfg->name, vpfe_cfg->ccdc, 32);
-	/* Get VINT0 irq resource */
-	res1 = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
-	if (!res1) {
-		v4l2_err(pdev->dev.driver,
-			 "Unable to get interrupt for VINT0\n");
-		ret = -ENODEV;
-		goto probe_free_ccdc_cfg_mem;
-	}
-	vpfe_dev->ccdc_irq0 = res1->start;
-
-	/* Get VINT1 irq resource */
-	res1 = platform_get_resource(pdev, IORESOURCE_IRQ, 1);
-	if (!res1) {
-		v4l2_err(pdev->dev.driver,
-			 "Unable to get interrupt for VINT1\n");
-		ret = -ENODEV;
-		goto probe_free_ccdc_cfg_mem;
-	}
-	vpfe_dev->ccdc_irq1 = res1->start;
-
-	ret = request_irq(vpfe_dev->ccdc_irq0, vpfe_isr, IRQF_DISABLED,
-			  "vpfe_capture0", vpfe_dev);
-
-	if (0 != ret) {
-		v4l2_err(pdev->dev.driver, "Unable to request interrupt\n");
-		goto probe_free_ccdc_cfg_mem;
-	}
-
-	/* Allocate memory for video device */
-	vfd = video_device_alloc();
-	if (NULL == vfd) {
-		ret = -ENOMEM;
-		v4l2_err(pdev->dev.driver, "Unable to alloc video device\n");
-		goto probe_out_release_irq;
-	}
-
-	/* Initialize field of video device */
-	vfd->release		= video_device_release;
-	vfd->fops		= &vpfe_fops;
-	vfd->ioctl_ops		= &vpfe_ioctl_ops;
-	vfd->tvnorms		= 0;
-	vfd->current_norm	= V4L2_STD_PAL;
-	vfd->v4l2_dev 		= &vpfe_dev->v4l2_dev;
-	snprintf(vfd->name, sizeof(vfd->name),
-		 "%s_V%d.%d.%d",
-		 CAPTURE_DRV_NAME,
-		 (VPFE_CAPTURE_VERSION_CODE >> 16) & 0xff,
-		 (VPFE_CAPTURE_VERSION_CODE >> 8) & 0xff,
-		 (VPFE_CAPTURE_VERSION_CODE) & 0xff);
-	/* Set video_dev to the video device */
-	vpfe_dev->video_dev	= vfd;
-
-	ret = v4l2_device_register(&pdev->dev, &vpfe_dev->v4l2_dev);
-	if (ret) {
-		v4l2_err(pdev->dev.driver,
-			"Unable to register v4l2 device.\n");
-		goto probe_out_video_release;
-	}
-	v4l2_info(&vpfe_dev->v4l2_dev, "v4l2 device registered\n");
-	spin_lock_init(&vpfe_dev->irqlock);
-	spin_lock_init(&vpfe_dev->dma_queue_lock);
-	mutex_init(&vpfe_dev->lock);
-
-	/* Initialize field of the device objects */
-	vpfe_dev->numbuffers = config_params.numbuffers;
-
-	/* Initialize prio member of device object */
-	v4l2_prio_init(&vpfe_dev->prio);
-	/* register video device */
-	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev,
-		"trying to register vpfe device.\n");
-	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev,
-		"video_dev=%x\n", (int)&vpfe_dev->video_dev);
-	vpfe_dev->fmt.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
-	ret = video_register_device(vpfe_dev->video_dev,
-				    VFL_TYPE_GRABBER, -1);
-
-	if (ret) {
-		v4l2_err(pdev->dev.driver,
-			"Unable to register video device.\n");
-		goto probe_out_v4l2_unregister;
-	}
-
-	v4l2_info(&vpfe_dev->v4l2_dev, "video device registered\n");
-	/* set the driver data in platform device */
-	platform_set_drvdata(pdev, vpfe_dev);
-	/* set driver private data */
-	video_set_drvdata(vpfe_dev->video_dev, vpfe_dev);
-	i2c_adap = i2c_get_adapter(vpfe_cfg->i2c_adapter_id);
-	num_subdevs = vpfe_cfg->num_subdevs;
-	vpfe_dev->sd = kmalloc(sizeof(struct v4l2_subdev *) * num_subdevs,
-				GFP_KERNEL);
-	if (NULL == vpfe_dev->sd) {
-		v4l2_err(&vpfe_dev->v4l2_dev,
-			"unable to allocate memory for subdevice pointers\n");
-		ret = -ENOMEM;
-		goto probe_out_video_unregister;
-	}
-
-	for (i = 0; i < num_subdevs; i++) {
-		struct v4l2_input *inps;
-
-		sdinfo = &vpfe_cfg->sub_devs[i];
-
-		/* Load up the subdevice */
-		vpfe_dev->sd[i] =
-			v4l2_i2c_new_subdev_board(&vpfe_dev->v4l2_dev,
-						  i2c_adap,
-						  &sdinfo->board_info,
-						  NULL);
-		if (vpfe_dev->sd[i]) {
-			v4l2_info(&vpfe_dev->v4l2_dev,
-				  "v4l2 sub device %s registered\n",
-				  sdinfo->name);
-			vpfe_dev->sd[i]->grp_id = sdinfo->grp_id;
-			/* update tvnorms from the sub devices */
-			for (j = 0; j < sdinfo->num_inputs; j++) {
-				inps = &sdinfo->inputs[j];
-				vfd->tvnorms |= inps->std;
-			}
-		} else {
-			v4l2_info(&vpfe_dev->v4l2_dev,
-				  "v4l2 sub device %s register fails\n",
-				  sdinfo->name);
-			goto probe_sd_out;
-		}
-	}
-
-	/* set first sub device as current one */
-	vpfe_dev->current_subdev = &vpfe_cfg->sub_devs[0];
-
-	/* We have at least one sub device to work with */
-	mutex_unlock(&ccdc_lock);
-	return 0;
-
-probe_sd_out:
-	kfree(vpfe_dev->sd);
-probe_out_video_unregister:
-	video_unregister_device(vpfe_dev->video_dev);
-probe_out_v4l2_unregister:
-	v4l2_device_unregister(&vpfe_dev->v4l2_dev);
-probe_out_video_release:
-	if (!video_is_registered(vpfe_dev->video_dev))
-		video_device_release(vpfe_dev->video_dev);
-probe_out_release_irq:
-	free_irq(vpfe_dev->ccdc_irq0, vpfe_dev);
-probe_free_ccdc_cfg_mem:
-	kfree(ccdc_cfg);
-probe_free_lock:
-	mutex_unlock(&ccdc_lock);
-probe_free_dev_mem:
-	kfree(vpfe_dev);
-	return ret;
-}
-
-/*
- * vpfe_remove : It un-register device from V4L2 driver
- */
-static int __devexit vpfe_remove(struct platform_device *pdev)
-{
-	struct vpfe_device *vpfe_dev = platform_get_drvdata(pdev);
-
-	v4l2_info(pdev->dev.driver, "vpfe_remove\n");
-
-	free_irq(vpfe_dev->ccdc_irq0, vpfe_dev);
-	kfree(vpfe_dev->sd);
-	v4l2_device_unregister(&vpfe_dev->v4l2_dev);
-	video_unregister_device(vpfe_dev->video_dev);
-	kfree(vpfe_dev);
-	kfree(ccdc_cfg);
-	return 0;
-}
-
-static int vpfe_suspend(struct device *dev)
-{
-	return 0;
-}
-
-static int vpfe_resume(struct device *dev)
-{
-	return 0;
-}
-
-static const struct dev_pm_ops vpfe_dev_pm_ops = {
-	.suspend = vpfe_suspend,
-	.resume = vpfe_resume,
-};
-
-static struct platform_driver vpfe_driver = {
-	.driver = {
-		.name = CAPTURE_DRV_NAME,
-		.owner = THIS_MODULE,
-		.pm = &vpfe_dev_pm_ops,
-	},
-	.probe = vpfe_probe,
-	.remove = __devexit_p(vpfe_remove),
-};
-
-module_platform_driver(vpfe_driver);
diff --git a/drivers/media/video/davinci/vpif.c b/drivers/media/video/davinci/vpif.c
deleted file mode 100644
index 9bd3caa34a3..00000000000
--- a/drivers/media/video/davinci/vpif.c
+++ /dev/null
@@ -1,514 +0,0 @@
-/*
- * vpif - Video Port Interface driver
- * VPIF is a receiver and transmitter for video data. It has two channels(0, 1)
- * that receiveing video byte stream and two channels(2, 3) for video output.
- * The hardware supports SDTV, HDTV formats, raw data capture.
- * Currently, the driver supports NTSC and PAL standards.
- *
- * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed .as is. WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/spinlock.h>
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <mach/hardware.h>
-
-#include "vpif.h"
-
-MODULE_DESCRIPTION("TI DaVinci Video Port Interface driver");
-MODULE_LICENSE("GPL");
-
-#define VPIF_CH0_MAX_MODES	(22)
-#define VPIF_CH1_MAX_MODES	(02)
-#define VPIF_CH2_MAX_MODES	(15)
-#define VPIF_CH3_MAX_MODES	(02)
-
-static resource_size_t	res_len;
-static struct resource	*res;
-spinlock_t vpif_lock;
-
-void __iomem *vpif_base;
-struct clk *vpif_clk;
-
-/**
- * ch_params: video standard configuration parameters for vpif
- * The table must include all presets from supported subdevices.
- */
-const struct vpif_channel_config_params ch_params[] = {
-	/* HDTV formats */
-	{
-		.name = "480p59_94",
-		.width = 720,
-		.height = 480,
-		.frm_fmt = 1,
-		.ycmux_mode = 0,
-		.eav2sav = 138-8,
-		.sav2eav = 720,
-		.l1 = 1,
-		.l3 = 43,
-		.l5 = 523,
-		.vsize = 525,
-		.capture_format = 0,
-		.vbi_supported = 0,
-		.hd_sd = 1,
-		.dv_preset = V4L2_DV_480P59_94,
-	},
-	{
-		.name = "576p50",
-		.width = 720,
-		.height = 576,
-		.frm_fmt = 1,
-		.ycmux_mode = 0,
-		.eav2sav = 144-8,
-		.sav2eav = 720,
-		.l1 = 1,
-		.l3 = 45,
-		.l5 = 621,
-		.vsize = 625,
-		.capture_format = 0,
-		.vbi_supported = 0,
-		.hd_sd = 1,
-		.dv_preset = V4L2_DV_576P50,
-	},
-	{
-		.name = "720p50",
-		.width = 1280,
-		.height = 720,
-		.frm_fmt = 1,
-		.ycmux_mode = 0,
-		.eav2sav = 700-8,
-		.sav2eav = 1280,
-		.l1 = 1,
-		.l3 = 26,
-		.l5 = 746,
-		.vsize = 750,
-		.capture_format = 0,
-		.vbi_supported = 0,
-		.hd_sd = 1,
-		.dv_preset = V4L2_DV_720P50,
-	},
-	{
-		.name = "720p60",
-		.width = 1280,
-		.height = 720,
-		.frm_fmt = 1,
-		.ycmux_mode = 0,
-		.eav2sav = 370 - 8,
-		.sav2eav = 1280,
-		.l1 = 1,
-		.l3 = 26,
-		.l5 = 746,
-		.vsize = 750,
-		.capture_format = 0,
-		.vbi_supported = 0,
-		.hd_sd = 1,
-		.dv_preset = V4L2_DV_720P60,
-	},
-	{
-		.name = "1080I50",
-		.width = 1920,
-		.height = 1080,
-		.frm_fmt = 0,
-		.ycmux_mode = 0,
-		.eav2sav = 720 - 8,
-		.sav2eav = 1920,
-		.l1 = 1,
-		.l3 = 21,
-		.l5 = 561,
-		.l7 = 563,
-		.l9 = 584,
-		.l11 = 1124,
-		.vsize = 1125,
-		.capture_format = 0,
-		.vbi_supported = 0,
-		.hd_sd = 1,
-		.dv_preset = V4L2_DV_1080I50,
-	},
-	{
-		.name = "1080I60",
-		.width = 1920,
-		.height = 1080,
-		.frm_fmt = 0,
-		.ycmux_mode = 0,
-		.eav2sav = 280 - 8,
-		.sav2eav = 1920,
-		.l1 = 1,
-		.l3 = 21,
-		.l5 = 561,
-		.l7 = 563,
-		.l9 = 584,
-		.l11 = 1124,
-		.vsize = 1125,
-		.capture_format = 0,
-		.vbi_supported = 0,
-		.hd_sd = 1,
-		.dv_preset = V4L2_DV_1080I60,
-	},
-	{
-		.name = "1080p60",
-		.width = 1920,
-		.height = 1080,
-		.frm_fmt = 1,
-		.ycmux_mode = 0,
-		.eav2sav = 280 - 8,
-		.sav2eav = 1920,
-		.l1 = 1,
-		.l3 = 42,
-		.l5 = 1122,
-		.vsize = 1125,
-		.capture_format = 0,
-		.vbi_supported = 0,
-		.hd_sd = 1,
-		.dv_preset = V4L2_DV_1080P60,
-	},
-
-	/* SDTV formats */
-	{
-		.name = "NTSC_M",
-		.width = 720,
-		.height = 480,
-		.frm_fmt = 0,
-		.ycmux_mode = 1,
-		.eav2sav = 268,
-		.sav2eav = 1440,
-		.l1 = 1,
-		.l3 = 23,
-		.l5 = 263,
-		.l7 = 266,
-		.l9 = 286,
-		.l11 = 525,
-		.vsize = 525,
-		.capture_format = 0,
-		.vbi_supported = 1,
-		.hd_sd = 0,
-		.stdid = V4L2_STD_525_60,
-	},
-	{
-		.name = "PAL_BDGHIK",
-		.width = 720,
-		.height = 576,
-		.frm_fmt = 0,
-		.ycmux_mode = 1,
-		.eav2sav = 280,
-		.sav2eav = 1440,
-		.l1 = 1,
-		.l3 = 23,
-		.l5 = 311,
-		.l7 = 313,
-		.l9 = 336,
-		.l11 = 624,
-		.vsize = 625,
-		.capture_format = 0,
-		.vbi_supported = 1,
-		.hd_sd = 0,
-		.stdid = V4L2_STD_625_50,
-	},
-};
-
-const unsigned int vpif_ch_params_count = ARRAY_SIZE(ch_params);
-
-static inline void vpif_wr_bit(u32 reg, u32 bit, u32 val)
-{
-	if (val)
-		vpif_set_bit(reg, bit);
-	else
-		vpif_clr_bit(reg, bit);
-}
-
-/* This structure is used to keep track of VPIF size register's offsets */
-struct vpif_registers {
-	u32 h_cfg, v_cfg_00, v_cfg_01, v_cfg_02, v_cfg, ch_ctrl;
-	u32 line_offset, vanc0_strt, vanc0_size, vanc1_strt;
-	u32 vanc1_size, width_mask, len_mask;
-	u8 max_modes;
-};
-
-static const struct vpif_registers vpifregs[VPIF_NUM_CHANNELS] = {
-	/* Channel0 */
-	{
-		VPIF_CH0_H_CFG, VPIF_CH0_V_CFG_00, VPIF_CH0_V_CFG_01,
-		VPIF_CH0_V_CFG_02, VPIF_CH0_V_CFG_03, VPIF_CH0_CTRL,
-		VPIF_CH0_IMG_ADD_OFST, 0, 0, 0, 0, 0x1FFF, 0xFFF,
-		VPIF_CH0_MAX_MODES,
-	},
-	/* Channel1 */
-	{
-		VPIF_CH1_H_CFG, VPIF_CH1_V_CFG_00, VPIF_CH1_V_CFG_01,
-		VPIF_CH1_V_CFG_02, VPIF_CH1_V_CFG_03, VPIF_CH1_CTRL,
-		VPIF_CH1_IMG_ADD_OFST, 0, 0, 0, 0, 0x1FFF, 0xFFF,
-		VPIF_CH1_MAX_MODES,
-	},
-	/* Channel2 */
-	{
-		VPIF_CH2_H_CFG, VPIF_CH2_V_CFG_00, VPIF_CH2_V_CFG_01,
-		VPIF_CH2_V_CFG_02, VPIF_CH2_V_CFG_03, VPIF_CH2_CTRL,
-		VPIF_CH2_IMG_ADD_OFST, VPIF_CH2_VANC0_STRT, VPIF_CH2_VANC0_SIZE,
-		VPIF_CH2_VANC1_STRT, VPIF_CH2_VANC1_SIZE, 0x7FF, 0x7FF,
-		VPIF_CH2_MAX_MODES
-	},
-	/* Channel3 */
-	{
-		VPIF_CH3_H_CFG, VPIF_CH3_V_CFG_00, VPIF_CH3_V_CFG_01,
-		VPIF_CH3_V_CFG_02, VPIF_CH3_V_CFG_03, VPIF_CH3_CTRL,
-		VPIF_CH3_IMG_ADD_OFST, VPIF_CH3_VANC0_STRT, VPIF_CH3_VANC0_SIZE,
-		VPIF_CH3_VANC1_STRT, VPIF_CH3_VANC1_SIZE, 0x7FF, 0x7FF,
-		VPIF_CH3_MAX_MODES
-	},
-};
-
-/* vpif_set_mode_info:
- * This function is used to set horizontal and vertical config parameters
- * As per the standard in the channel, configure the values of L1, L3,
- * L5, L7  L9, L11 in VPIF Register , also write width and height
- */
-static void vpif_set_mode_info(const struct vpif_channel_config_params *config,
-				u8 channel_id, u8 config_channel_id)
-{
-	u32 value;
-
-	value = (config->eav2sav & vpifregs[config_channel_id].width_mask);
-	value <<= VPIF_CH_LEN_SHIFT;
-	value |= (config->sav2eav & vpifregs[config_channel_id].width_mask);
-	regw(value, vpifregs[channel_id].h_cfg);
-
-	value = (config->l1 & vpifregs[config_channel_id].len_mask);
-	value <<= VPIF_CH_LEN_SHIFT;
-	value |= (config->l3 & vpifregs[config_channel_id].len_mask);
-	regw(value, vpifregs[channel_id].v_cfg_00);
-
-	value = (config->l5 & vpifregs[config_channel_id].len_mask);
-	value <<= VPIF_CH_LEN_SHIFT;
-	value |= (config->l7 & vpifregs[config_channel_id].len_mask);
-	regw(value, vpifregs[channel_id].v_cfg_01);
-
-	value = (config->l9 & vpifregs[config_channel_id].len_mask);
-	value <<= VPIF_CH_LEN_SHIFT;
-	value |= (config->l11 & vpifregs[config_channel_id].len_mask);
-	regw(value, vpifregs[channel_id].v_cfg_02);
-
-	value = (config->vsize & vpifregs[config_channel_id].len_mask);
-	regw(value, vpifregs[channel_id].v_cfg);
-}
-
-/* config_vpif_params
- * Function to set the parameters of a channel
- * Mainly modifies the channel ciontrol register
- * It sets frame format, yc mux mode
- */
-static void config_vpif_params(struct vpif_params *vpifparams,
-				u8 channel_id, u8 found)
-{
-	const struct vpif_channel_config_params *config = &vpifparams->std_info;
-	u32 value, ch_nip, reg;
-	u8 start, end;
-	int i;
-
-	start = channel_id;
-	end = channel_id + found;
-
-	for (i = start; i < end; i++) {
-		reg = vpifregs[i].ch_ctrl;
-		if (channel_id < 2)
-			ch_nip = VPIF_CAPTURE_CH_NIP;
-		else
-			ch_nip = VPIF_DISPLAY_CH_NIP;
-
-		vpif_wr_bit(reg, ch_nip, config->frm_fmt);
-		vpif_wr_bit(reg, VPIF_CH_YC_MUX_BIT, config->ycmux_mode);
-		vpif_wr_bit(reg, VPIF_CH_INPUT_FIELD_FRAME_BIT,
-					vpifparams->video_params.storage_mode);
-
-		/* Set raster scanning SDR Format */
-		vpif_clr_bit(reg, VPIF_CH_SDR_FMT_BIT);
-		vpif_wr_bit(reg, VPIF_CH_DATA_MODE_BIT, config->capture_format);
-
-		if (channel_id > 1)	/* Set the Pixel enable bit */
-			vpif_set_bit(reg, VPIF_DISPLAY_PIX_EN_BIT);
-		else if (config->capture_format) {
-			/* Set the polarity of various pins */
-			vpif_wr_bit(reg, VPIF_CH_FID_POLARITY_BIT,
-					vpifparams->iface.fid_pol);
-			vpif_wr_bit(reg, VPIF_CH_V_VALID_POLARITY_BIT,
-					vpifparams->iface.vd_pol);
-			vpif_wr_bit(reg, VPIF_CH_H_VALID_POLARITY_BIT,
-					vpifparams->iface.hd_pol);
-
-			value = regr(reg);
-			/* Set data width */
-			value &= ~(0x3u <<
-					VPIF_CH_DATA_WIDTH_BIT);
-			value |= ((vpifparams->params.data_sz) <<
-						     VPIF_CH_DATA_WIDTH_BIT);
-			regw(value, reg);
-		}
-
-		/* Write the pitch in the driver */
-		regw((vpifparams->video_params.hpitch),
-						vpifregs[i].line_offset);
-	}
-}
-
-/* vpif_set_video_params
- * This function is used to set video parameters in VPIF register
- */
-int vpif_set_video_params(struct vpif_params *vpifparams, u8 channel_id)
-{
-	const struct vpif_channel_config_params *config = &vpifparams->std_info;
-	int found = 1;
-
-	vpif_set_mode_info(config, channel_id, channel_id);
-	if (!config->ycmux_mode) {
-		/* YC are on separate channels (HDTV formats) */
-		vpif_set_mode_info(config, channel_id + 1, channel_id);
-		found = 2;
-	}
-
-	config_vpif_params(vpifparams, channel_id, found);
-
-	regw(0x80, VPIF_REQ_SIZE);
-	regw(0x01, VPIF_EMULATION_CTRL);
-
-	return found;
-}
-EXPORT_SYMBOL(vpif_set_video_params);
-
-void vpif_set_vbi_display_params(struct vpif_vbi_params *vbiparams,
-				u8 channel_id)
-{
-	u32 value;
-
-	value = 0x3F8 & (vbiparams->hstart0);
-	value |= 0x3FFFFFF & ((vbiparams->vstart0) << 16);
-	regw(value, vpifregs[channel_id].vanc0_strt);
-
-	value = 0x3F8 & (vbiparams->hstart1);
-	value |= 0x3FFFFFF & ((vbiparams->vstart1) << 16);
-	regw(value, vpifregs[channel_id].vanc1_strt);
-
-	value = 0x3F8 & (vbiparams->hsize0);
-	value |= 0x3FFFFFF & ((vbiparams->vsize0) << 16);
-	regw(value, vpifregs[channel_id].vanc0_size);
-
-	value = 0x3F8 & (vbiparams->hsize1);
-	value |= 0x3FFFFFF & ((vbiparams->vsize1) << 16);
-	regw(value, vpifregs[channel_id].vanc1_size);
-
-}
-EXPORT_SYMBOL(vpif_set_vbi_display_params);
-
-int vpif_channel_getfid(u8 channel_id)
-{
-	return (regr(vpifregs[channel_id].ch_ctrl) & VPIF_CH_FID_MASK)
-					>> VPIF_CH_FID_SHIFT;
-}
-EXPORT_SYMBOL(vpif_channel_getfid);
-
-static int __devinit vpif_probe(struct platform_device *pdev)
-{
-	int status = 0;
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!res)
-		return -ENOENT;
-
-	res_len = resource_size(res);
-
-	res = request_mem_region(res->start, res_len, res->name);
-	if (!res)
-		return -EBUSY;
-
-	vpif_base = ioremap(res->start, res_len);
-	if (!vpif_base) {
-		status = -EBUSY;
-		goto fail;
-	}
-
-	vpif_clk = clk_get(&pdev->dev, "vpif");
-	if (IS_ERR(vpif_clk)) {
-		status = PTR_ERR(vpif_clk);
-		goto clk_fail;
-	}
-	clk_enable(vpif_clk);
-
-	spin_lock_init(&vpif_lock);
-	dev_info(&pdev->dev, "vpif probe success\n");
-	return 0;
-
-clk_fail:
-	iounmap(vpif_base);
-fail:
-	release_mem_region(res->start, res_len);
-	return status;
-}
-
-static int __devexit vpif_remove(struct platform_device *pdev)
-{
-	if (vpif_clk) {
-		clk_disable(vpif_clk);
-		clk_put(vpif_clk);
-	}
-
-	iounmap(vpif_base);
-	release_mem_region(res->start, res_len);
-	return 0;
-}
-
-#ifdef CONFIG_PM
-static int vpif_suspend(struct device *dev)
-{
-	clk_disable(vpif_clk);
-	return 0;
-}
-
-static int vpif_resume(struct device *dev)
-{
-	clk_enable(vpif_clk);
-	return 0;
-}
-
-static const struct dev_pm_ops vpif_pm = {
-	.suspend        = vpif_suspend,
-	.resume         = vpif_resume,
-};
-
-#define vpif_pm_ops (&vpif_pm)
-#else
-#define vpif_pm_ops NULL
-#endif
-
-static struct platform_driver vpif_driver = {
-	.driver = {
-		.name	= "vpif",
-		.owner = THIS_MODULE,
-		.pm	= vpif_pm_ops,
-	},
-	.remove = __devexit_p(vpif_remove),
-	.probe = vpif_probe,
-};
-
-static void vpif_exit(void)
-{
-	platform_driver_unregister(&vpif_driver);
-}
-
-static int __init vpif_init(void)
-{
-	return platform_driver_register(&vpif_driver);
-}
-subsys_initcall(vpif_init);
-module_exit(vpif_exit);
-
diff --git a/drivers/media/video/davinci/vpif.h b/drivers/media/video/davinci/vpif.h
deleted file mode 100644
index c2ce4d97c27..00000000000
--- a/drivers/media/video/davinci/vpif.h
+++ /dev/null
@@ -1,688 +0,0 @@
-/*
- * VPIF header file
- *
- * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed .as is. WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef VPIF_H
-#define VPIF_H
-
-#include <linux/io.h>
-#include <linux/videodev2.h>
-#include <media/davinci/vpif_types.h>
-
-/* Maximum channel allowed */
-#define VPIF_NUM_CHANNELS		(4)
-#define VPIF_CAPTURE_NUM_CHANNELS	(2)
-#define VPIF_DISPLAY_NUM_CHANNELS	(2)
-
-/* Macros to read/write registers */
-extern void __iomem *vpif_base;
-extern spinlock_t vpif_lock;
-
-#define regr(reg)               readl((reg) + vpif_base)
-#define regw(value, reg)        writel(value, (reg + vpif_base))
-
-/* Register Address Offsets */
-#define VPIF_PID			(0x0000)
-#define VPIF_CH0_CTRL			(0x0004)
-#define VPIF_CH1_CTRL			(0x0008)
-#define VPIF_CH2_CTRL			(0x000C)
-#define VPIF_CH3_CTRL			(0x0010)
-
-#define VPIF_INTEN			(0x0020)
-#define VPIF_INTEN_SET			(0x0024)
-#define VPIF_INTEN_CLR			(0x0028)
-#define VPIF_STATUS			(0x002C)
-#define VPIF_STATUS_CLR			(0x0030)
-#define VPIF_EMULATION_CTRL		(0x0034)
-#define VPIF_REQ_SIZE			(0x0038)
-
-#define VPIF_CH0_TOP_STRT_ADD_LUMA	(0x0040)
-#define VPIF_CH0_BTM_STRT_ADD_LUMA	(0x0044)
-#define VPIF_CH0_TOP_STRT_ADD_CHROMA	(0x0048)
-#define VPIF_CH0_BTM_STRT_ADD_CHROMA	(0x004c)
-#define VPIF_CH0_TOP_STRT_ADD_HANC	(0x0050)
-#define VPIF_CH0_BTM_STRT_ADD_HANC	(0x0054)
-#define VPIF_CH0_TOP_STRT_ADD_VANC	(0x0058)
-#define VPIF_CH0_BTM_STRT_ADD_VANC	(0x005c)
-#define VPIF_CH0_SP_CFG			(0x0060)
-#define VPIF_CH0_IMG_ADD_OFST		(0x0064)
-#define VPIF_CH0_HANC_ADD_OFST		(0x0068)
-#define VPIF_CH0_H_CFG			(0x006c)
-#define VPIF_CH0_V_CFG_00		(0x0070)
-#define VPIF_CH0_V_CFG_01		(0x0074)
-#define VPIF_CH0_V_CFG_02		(0x0078)
-#define VPIF_CH0_V_CFG_03		(0x007c)
-
-#define VPIF_CH1_TOP_STRT_ADD_LUMA	(0x0080)
-#define VPIF_CH1_BTM_STRT_ADD_LUMA	(0x0084)
-#define VPIF_CH1_TOP_STRT_ADD_CHROMA	(0x0088)
-#define VPIF_CH1_BTM_STRT_ADD_CHROMA	(0x008c)
-#define VPIF_CH1_TOP_STRT_ADD_HANC	(0x0090)
-#define VPIF_CH1_BTM_STRT_ADD_HANC	(0x0094)
-#define VPIF_CH1_TOP_STRT_ADD_VANC	(0x0098)
-#define VPIF_CH1_BTM_STRT_ADD_VANC	(0x009c)
-#define VPIF_CH1_SP_CFG			(0x00a0)
-#define VPIF_CH1_IMG_ADD_OFST		(0x00a4)
-#define VPIF_CH1_HANC_ADD_OFST		(0x00a8)
-#define VPIF_CH1_H_CFG			(0x00ac)
-#define VPIF_CH1_V_CFG_00		(0x00b0)
-#define VPIF_CH1_V_CFG_01		(0x00b4)
-#define VPIF_CH1_V_CFG_02		(0x00b8)
-#define VPIF_CH1_V_CFG_03		(0x00bc)
-
-#define VPIF_CH2_TOP_STRT_ADD_LUMA	(0x00c0)
-#define VPIF_CH2_BTM_STRT_ADD_LUMA	(0x00c4)
-#define VPIF_CH2_TOP_STRT_ADD_CHROMA	(0x00c8)
-#define VPIF_CH2_BTM_STRT_ADD_CHROMA	(0x00cc)
-#define VPIF_CH2_TOP_STRT_ADD_HANC	(0x00d0)
-#define VPIF_CH2_BTM_STRT_ADD_HANC	(0x00d4)
-#define VPIF_CH2_TOP_STRT_ADD_VANC	(0x00d8)
-#define VPIF_CH2_BTM_STRT_ADD_VANC	(0x00dc)
-#define VPIF_CH2_SP_CFG			(0x00e0)
-#define VPIF_CH2_IMG_ADD_OFST		(0x00e4)
-#define VPIF_CH2_HANC_ADD_OFST		(0x00e8)
-#define VPIF_CH2_H_CFG			(0x00ec)
-#define VPIF_CH2_V_CFG_00		(0x00f0)
-#define VPIF_CH2_V_CFG_01		(0x00f4)
-#define VPIF_CH2_V_CFG_02		(0x00f8)
-#define VPIF_CH2_V_CFG_03		(0x00fc)
-#define VPIF_CH2_HANC0_STRT		(0x0100)
-#define VPIF_CH2_HANC0_SIZE		(0x0104)
-#define VPIF_CH2_HANC1_STRT		(0x0108)
-#define VPIF_CH2_HANC1_SIZE		(0x010c)
-#define VPIF_CH2_VANC0_STRT		(0x0110)
-#define VPIF_CH2_VANC0_SIZE		(0x0114)
-#define VPIF_CH2_VANC1_STRT		(0x0118)
-#define VPIF_CH2_VANC1_SIZE		(0x011c)
-
-#define VPIF_CH3_TOP_STRT_ADD_LUMA	(0x0140)
-#define VPIF_CH3_BTM_STRT_ADD_LUMA	(0x0144)
-#define VPIF_CH3_TOP_STRT_ADD_CHROMA	(0x0148)
-#define VPIF_CH3_BTM_STRT_ADD_CHROMA	(0x014c)
-#define VPIF_CH3_TOP_STRT_ADD_HANC	(0x0150)
-#define VPIF_CH3_BTM_STRT_ADD_HANC	(0x0154)
-#define VPIF_CH3_TOP_STRT_ADD_VANC	(0x0158)
-#define VPIF_CH3_BTM_STRT_ADD_VANC	(0x015c)
-#define VPIF_CH3_SP_CFG			(0x0160)
-#define VPIF_CH3_IMG_ADD_OFST		(0x0164)
-#define VPIF_CH3_HANC_ADD_OFST		(0x0168)
-#define VPIF_CH3_H_CFG			(0x016c)
-#define VPIF_CH3_V_CFG_00		(0x0170)
-#define VPIF_CH3_V_CFG_01		(0x0174)
-#define VPIF_CH3_V_CFG_02		(0x0178)
-#define VPIF_CH3_V_CFG_03		(0x017c)
-#define VPIF_CH3_HANC0_STRT		(0x0180)
-#define VPIF_CH3_HANC0_SIZE		(0x0184)
-#define VPIF_CH3_HANC1_STRT		(0x0188)
-#define VPIF_CH3_HANC1_SIZE		(0x018c)
-#define VPIF_CH3_VANC0_STRT		(0x0190)
-#define VPIF_CH3_VANC0_SIZE		(0x0194)
-#define VPIF_CH3_VANC1_STRT		(0x0198)
-#define VPIF_CH3_VANC1_SIZE		(0x019c)
-
-#define VPIF_IODFT_CTRL			(0x01c0)
-
-/* Functions for bit Manipulation */
-static inline void vpif_set_bit(u32 reg, u32 bit)
-{
-	regw((regr(reg)) | (0x01 << bit), reg);
-}
-
-static inline void vpif_clr_bit(u32 reg, u32 bit)
-{
-	regw(((regr(reg)) & ~(0x01 << bit)), reg);
-}
-
-/* Macro for Generating mask */
-#ifdef GENERATE_MASK
-#undef GENERATE_MASK
-#endif
-
-#define GENERATE_MASK(bits, pos) \
-		((((0xFFFFFFFF) << (32 - bits)) >> (32 - bits)) << pos)
-
-/* Bit positions in the channel control registers */
-#define VPIF_CH_DATA_MODE_BIT	(2)
-#define VPIF_CH_YC_MUX_BIT	(3)
-#define VPIF_CH_SDR_FMT_BIT	(4)
-#define VPIF_CH_HANC_EN_BIT	(8)
-#define VPIF_CH_VANC_EN_BIT	(9)
-
-#define VPIF_CAPTURE_CH_NIP	(10)
-#define VPIF_DISPLAY_CH_NIP	(11)
-
-#define VPIF_DISPLAY_PIX_EN_BIT	(10)
-
-#define VPIF_CH_INPUT_FIELD_FRAME_BIT	(12)
-
-#define VPIF_CH_FID_POLARITY_BIT	(15)
-#define VPIF_CH_V_VALID_POLARITY_BIT	(14)
-#define VPIF_CH_H_VALID_POLARITY_BIT	(13)
-#define VPIF_CH_DATA_WIDTH_BIT		(28)
-
-#define VPIF_CH_CLK_EDGE_CTRL_BIT	(31)
-
-/* Mask various length */
-#define VPIF_CH_EAVSAV_MASK	GENERATE_MASK(13, 0)
-#define VPIF_CH_LEN_MASK	GENERATE_MASK(12, 0)
-#define VPIF_CH_WIDTH_MASK	GENERATE_MASK(13, 0)
-#define VPIF_CH_LEN_SHIFT	(16)
-
-/* VPIF masks for registers */
-#define VPIF_REQ_SIZE_MASK	(0x1ff)
-
-/* bit posotion of interrupt vpif_ch_intr register */
-#define VPIF_INTEN_FRAME_CH0	(0x00000001)
-#define VPIF_INTEN_FRAME_CH1	(0x00000002)
-#define VPIF_INTEN_FRAME_CH2	(0x00000004)
-#define VPIF_INTEN_FRAME_CH3	(0x00000008)
-
-/* bit position of clock and channel enable in vpif_chn_ctrl register */
-
-#define VPIF_CH0_CLK_EN		(0x00000002)
-#define VPIF_CH0_EN		(0x00000001)
-#define VPIF_CH1_CLK_EN		(0x00000002)
-#define VPIF_CH1_EN		(0x00000001)
-#define VPIF_CH2_CLK_EN		(0x00000002)
-#define VPIF_CH2_EN		(0x00000001)
-#define VPIF_CH3_CLK_EN		(0x00000002)
-#define VPIF_CH3_EN		(0x00000001)
-#define VPIF_CH_CLK_EN		(0x00000002)
-#define VPIF_CH_EN		(0x00000001)
-
-#define VPIF_INT_TOP	(0x00)
-#define VPIF_INT_BOTTOM	(0x01)
-#define VPIF_INT_BOTH	(0x02)
-
-#define VPIF_CH0_INT_CTRL_SHIFT	(6)
-#define VPIF_CH1_INT_CTRL_SHIFT	(6)
-#define VPIF_CH2_INT_CTRL_SHIFT	(6)
-#define VPIF_CH3_INT_CTRL_SHIFT	(6)
-#define VPIF_CH_INT_CTRL_SHIFT	(6)
-
-#define VPIF_CH2_CLIP_ANC_EN	14
-#define VPIF_CH2_CLIP_ACTIVE_EN	13
-
-#define VPIF_CH3_CLIP_ANC_EN	14
-#define VPIF_CH3_CLIP_ACTIVE_EN	13
-
-/* enabled interrupt on both the fields on vpid_ch0_ctrl register */
-#define channel0_intr_assert()	(regw((regr(VPIF_CH0_CTRL)|\
-	(VPIF_INT_BOTH << VPIF_CH0_INT_CTRL_SHIFT)), VPIF_CH0_CTRL))
-
-/* enabled interrupt on both the fields on vpid_ch1_ctrl register */
-#define channel1_intr_assert()	(regw((regr(VPIF_CH1_CTRL)|\
-	(VPIF_INT_BOTH << VPIF_CH1_INT_CTRL_SHIFT)), VPIF_CH1_CTRL))
-
-/* enabled interrupt on both the fields on vpid_ch0_ctrl register */
-#define channel2_intr_assert() 	(regw((regr(VPIF_CH2_CTRL)|\
-	(VPIF_INT_BOTH << VPIF_CH2_INT_CTRL_SHIFT)), VPIF_CH2_CTRL))
-
-/* enabled interrupt on both the fields on vpid_ch1_ctrl register */
-#define channel3_intr_assert() 	(regw((regr(VPIF_CH3_CTRL)|\
-	(VPIF_INT_BOTH << VPIF_CH3_INT_CTRL_SHIFT)), VPIF_CH3_CTRL))
-
-#define VPIF_CH_FID_MASK	(0x20)
-#define VPIF_CH_FID_SHIFT	(5)
-
-#define VPIF_NTSC_VBI_START_FIELD0	(1)
-#define VPIF_NTSC_VBI_START_FIELD1	(263)
-#define VPIF_PAL_VBI_START_FIELD0	(624)
-#define VPIF_PAL_VBI_START_FIELD1	(311)
-
-#define VPIF_NTSC_HBI_START_FIELD0	(1)
-#define VPIF_NTSC_HBI_START_FIELD1	(263)
-#define VPIF_PAL_HBI_START_FIELD0	(624)
-#define VPIF_PAL_HBI_START_FIELD1	(311)
-
-#define VPIF_NTSC_VBI_COUNT_FIELD0	(20)
-#define VPIF_NTSC_VBI_COUNT_FIELD1	(19)
-#define VPIF_PAL_VBI_COUNT_FIELD0	(24)
-#define VPIF_PAL_VBI_COUNT_FIELD1	(25)
-
-#define VPIF_NTSC_HBI_COUNT_FIELD0	(263)
-#define VPIF_NTSC_HBI_COUNT_FIELD1	(262)
-#define VPIF_PAL_HBI_COUNT_FIELD0	(312)
-#define VPIF_PAL_HBI_COUNT_FIELD1	(313)
-
-#define VPIF_NTSC_VBI_SAMPLES_PER_LINE	(720)
-#define VPIF_PAL_VBI_SAMPLES_PER_LINE	(720)
-#define VPIF_NTSC_HBI_SAMPLES_PER_LINE	(268)
-#define VPIF_PAL_HBI_SAMPLES_PER_LINE	(280)
-
-#define VPIF_CH_VANC_EN			(0x20)
-#define VPIF_DMA_REQ_SIZE		(0x080)
-#define VPIF_EMULATION_DISABLE		(0x01)
-
-extern u8 irq_vpif_capture_channel[VPIF_NUM_CHANNELS];
-
-/* inline function to enable/disable channel0 */
-static inline void enable_channel0(int enable)
-{
-	if (enable)
-		regw((regr(VPIF_CH0_CTRL) | (VPIF_CH0_EN)), VPIF_CH0_CTRL);
-	else
-		regw((regr(VPIF_CH0_CTRL) & (~VPIF_CH0_EN)), VPIF_CH0_CTRL);
-}
-
-/* inline function to enable/disable channel1 */
-static inline void enable_channel1(int enable)
-{
-	if (enable)
-		regw((regr(VPIF_CH1_CTRL) | (VPIF_CH1_EN)), VPIF_CH1_CTRL);
-	else
-		regw((regr(VPIF_CH1_CTRL) & (~VPIF_CH1_EN)), VPIF_CH1_CTRL);
-}
-
-/* inline function to enable interrupt for channel0 */
-static inline void channel0_intr_enable(int enable)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&vpif_lock, flags);
-
-	if (enable) {
-		regw((regr(VPIF_INTEN) | 0x10), VPIF_INTEN);
-		regw((regr(VPIF_INTEN_SET) | 0x10), VPIF_INTEN_SET);
-
-		regw((regr(VPIF_INTEN) | VPIF_INTEN_FRAME_CH0), VPIF_INTEN);
-		regw((regr(VPIF_INTEN_SET) | VPIF_INTEN_FRAME_CH0),
-							VPIF_INTEN_SET);
-	} else {
-		regw((regr(VPIF_INTEN) & (~VPIF_INTEN_FRAME_CH0)), VPIF_INTEN);
-		regw((regr(VPIF_INTEN_SET) | VPIF_INTEN_FRAME_CH0),
-							VPIF_INTEN_SET);
-	}
-	spin_unlock_irqrestore(&vpif_lock, flags);
-}
-
-/* inline function to enable interrupt for channel1 */
-static inline void channel1_intr_enable(int enable)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&vpif_lock, flags);
-
-	if (enable) {
-		regw((regr(VPIF_INTEN) | 0x10), VPIF_INTEN);
-		regw((regr(VPIF_INTEN_SET) | 0x10), VPIF_INTEN_SET);
-
-		regw((regr(VPIF_INTEN) | VPIF_INTEN_FRAME_CH1), VPIF_INTEN);
-		regw((regr(VPIF_INTEN_SET) | VPIF_INTEN_FRAME_CH1),
-							VPIF_INTEN_SET);
-	} else {
-		regw((regr(VPIF_INTEN) & (~VPIF_INTEN_FRAME_CH1)), VPIF_INTEN);
-		regw((regr(VPIF_INTEN_SET) | VPIF_INTEN_FRAME_CH1),
-							VPIF_INTEN_SET);
-	}
-	spin_unlock_irqrestore(&vpif_lock, flags);
-}
-
-/* inline function to set buffer addresses in case of Y/C non mux mode */
-static inline void ch0_set_videobuf_addr_yc_nmux(unsigned long top_strt_luma,
-						 unsigned long btm_strt_luma,
-						 unsigned long top_strt_chroma,
-						 unsigned long btm_strt_chroma)
-{
-	regw(top_strt_luma, VPIF_CH0_TOP_STRT_ADD_LUMA);
-	regw(btm_strt_luma, VPIF_CH0_BTM_STRT_ADD_LUMA);
-	regw(top_strt_chroma, VPIF_CH1_TOP_STRT_ADD_CHROMA);
-	regw(btm_strt_chroma, VPIF_CH1_BTM_STRT_ADD_CHROMA);
-}
-
-/* inline function to set buffer addresses in VPIF registers for video data */
-static inline void ch0_set_videobuf_addr(unsigned long top_strt_luma,
-					 unsigned long btm_strt_luma,
-					 unsigned long top_strt_chroma,
-					 unsigned long btm_strt_chroma)
-{
-	regw(top_strt_luma, VPIF_CH0_TOP_STRT_ADD_LUMA);
-	regw(btm_strt_luma, VPIF_CH0_BTM_STRT_ADD_LUMA);
-	regw(top_strt_chroma, VPIF_CH0_TOP_STRT_ADD_CHROMA);
-	regw(btm_strt_chroma, VPIF_CH0_BTM_STRT_ADD_CHROMA);
-}
-
-static inline void ch1_set_videobuf_addr(unsigned long top_strt_luma,
-					 unsigned long btm_strt_luma,
-					 unsigned long top_strt_chroma,
-					 unsigned long btm_strt_chroma)
-{
-
-	regw(top_strt_luma, VPIF_CH1_TOP_STRT_ADD_LUMA);
-	regw(btm_strt_luma, VPIF_CH1_BTM_STRT_ADD_LUMA);
-	regw(top_strt_chroma, VPIF_CH1_TOP_STRT_ADD_CHROMA);
-	regw(btm_strt_chroma, VPIF_CH1_BTM_STRT_ADD_CHROMA);
-}
-
-static inline void ch0_set_vbi_addr(unsigned long top_vbi,
-	unsigned long btm_vbi, unsigned long a, unsigned long b)
-{
-	regw(top_vbi, VPIF_CH0_TOP_STRT_ADD_VANC);
-	regw(btm_vbi, VPIF_CH0_BTM_STRT_ADD_VANC);
-}
-
-static inline void ch0_set_hbi_addr(unsigned long top_vbi,
-	unsigned long btm_vbi, unsigned long a, unsigned long b)
-{
-	regw(top_vbi, VPIF_CH0_TOP_STRT_ADD_HANC);
-	regw(btm_vbi, VPIF_CH0_BTM_STRT_ADD_HANC);
-}
-
-static inline void ch1_set_vbi_addr(unsigned long top_vbi,
-	unsigned long btm_vbi, unsigned long a, unsigned long b)
-{
-	regw(top_vbi, VPIF_CH1_TOP_STRT_ADD_VANC);
-	regw(btm_vbi, VPIF_CH1_BTM_STRT_ADD_VANC);
-}
-
-static inline void ch1_set_hbi_addr(unsigned long top_vbi,
-	unsigned long btm_vbi, unsigned long a, unsigned long b)
-{
-	regw(top_vbi, VPIF_CH1_TOP_STRT_ADD_HANC);
-	regw(btm_vbi, VPIF_CH1_BTM_STRT_ADD_HANC);
-}
-
-/* Inline function to enable raw vbi in the given channel */
-static inline void disable_raw_feature(u8 channel_id, u8 index)
-{
-	u32 ctrl_reg;
-	if (0 == channel_id)
-		ctrl_reg = VPIF_CH0_CTRL;
-	else
-		ctrl_reg = VPIF_CH1_CTRL;
-
-	if (1 == index)
-		vpif_clr_bit(ctrl_reg, VPIF_CH_VANC_EN_BIT);
-	else
-		vpif_clr_bit(ctrl_reg, VPIF_CH_HANC_EN_BIT);
-}
-
-static inline void enable_raw_feature(u8 channel_id, u8 index)
-{
-	u32 ctrl_reg;
-	if (0 == channel_id)
-		ctrl_reg = VPIF_CH0_CTRL;
-	else
-		ctrl_reg = VPIF_CH1_CTRL;
-
-	if (1 == index)
-		vpif_set_bit(ctrl_reg, VPIF_CH_VANC_EN_BIT);
-	else
-		vpif_set_bit(ctrl_reg, VPIF_CH_HANC_EN_BIT);
-}
-
-/* inline function to enable/disable channel2 */
-static inline void enable_channel2(int enable)
-{
-	if (enable) {
-		regw((regr(VPIF_CH2_CTRL) | (VPIF_CH2_CLK_EN)), VPIF_CH2_CTRL);
-		regw((regr(VPIF_CH2_CTRL) | (VPIF_CH2_EN)), VPIF_CH2_CTRL);
-	} else {
-		regw((regr(VPIF_CH2_CTRL) & (~VPIF_CH2_CLK_EN)), VPIF_CH2_CTRL);
-		regw((regr(VPIF_CH2_CTRL) & (~VPIF_CH2_EN)), VPIF_CH2_CTRL);
-	}
-}
-
-/* inline function to enable/disable channel3 */
-static inline void enable_channel3(int enable)
-{
-	if (enable) {
-		regw((regr(VPIF_CH3_CTRL) | (VPIF_CH3_CLK_EN)), VPIF_CH3_CTRL);
-		regw((regr(VPIF_CH3_CTRL) | (VPIF_CH3_EN)), VPIF_CH3_CTRL);
-	} else {
-		regw((regr(VPIF_CH3_CTRL) & (~VPIF_CH3_CLK_EN)), VPIF_CH3_CTRL);
-		regw((regr(VPIF_CH3_CTRL) & (~VPIF_CH3_EN)), VPIF_CH3_CTRL);
-	}
-}
-
-/* inline function to enable interrupt for channel2 */
-static inline void channel2_intr_enable(int enable)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&vpif_lock, flags);
-
-	if (enable) {
-		regw((regr(VPIF_INTEN) | 0x10), VPIF_INTEN);
-		regw((regr(VPIF_INTEN_SET) | 0x10), VPIF_INTEN_SET);
-		regw((regr(VPIF_INTEN) | VPIF_INTEN_FRAME_CH2), VPIF_INTEN);
-		regw((regr(VPIF_INTEN_SET) | VPIF_INTEN_FRAME_CH2),
-							VPIF_INTEN_SET);
-	} else {
-		regw((regr(VPIF_INTEN) & (~VPIF_INTEN_FRAME_CH2)), VPIF_INTEN);
-		regw((regr(VPIF_INTEN_SET) | VPIF_INTEN_FRAME_CH2),
-							VPIF_INTEN_SET);
-	}
-	spin_unlock_irqrestore(&vpif_lock, flags);
-}
-
-/* inline function to enable interrupt for channel3 */
-static inline void channel3_intr_enable(int enable)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&vpif_lock, flags);
-
-	if (enable) {
-		regw((regr(VPIF_INTEN) | 0x10), VPIF_INTEN);
-		regw((regr(VPIF_INTEN_SET) | 0x10), VPIF_INTEN_SET);
-
-		regw((regr(VPIF_INTEN) | VPIF_INTEN_FRAME_CH3), VPIF_INTEN);
-		regw((regr(VPIF_INTEN_SET) | VPIF_INTEN_FRAME_CH3),
-							VPIF_INTEN_SET);
-	} else {
-		regw((regr(VPIF_INTEN) & (~VPIF_INTEN_FRAME_CH3)), VPIF_INTEN);
-		regw((regr(VPIF_INTEN_SET) | VPIF_INTEN_FRAME_CH3),
-							VPIF_INTEN_SET);
-	}
-	spin_unlock_irqrestore(&vpif_lock, flags);
-}
-
-/* inline function to enable raw vbi data for channel2 */
-static inline void channel2_raw_enable(int enable, u8 index)
-{
-	u32 mask;
-
-	if (1 == index)
-		mask = VPIF_CH_VANC_EN_BIT;
-	else
-		mask = VPIF_CH_HANC_EN_BIT;
-
-	if (enable)
-		vpif_set_bit(VPIF_CH2_CTRL, mask);
-	else
-		vpif_clr_bit(VPIF_CH2_CTRL, mask);
-}
-
-/* inline function to enable raw vbi data for channel3*/
-static inline void channel3_raw_enable(int enable, u8 index)
-{
-	u32 mask;
-
-	if (1 == index)
-		mask = VPIF_CH_VANC_EN_BIT;
-	else
-		mask = VPIF_CH_HANC_EN_BIT;
-
-	if (enable)
-		vpif_set_bit(VPIF_CH3_CTRL, mask);
-	else
-		vpif_clr_bit(VPIF_CH3_CTRL, mask);
-}
-
-/* function to enable clipping (for both active and blanking regions) on ch 2 */
-static inline void channel2_clipping_enable(int enable)
-{
-	if (enable) {
-		vpif_set_bit(VPIF_CH2_CTRL, VPIF_CH2_CLIP_ANC_EN);
-		vpif_set_bit(VPIF_CH2_CTRL, VPIF_CH2_CLIP_ACTIVE_EN);
-	} else {
-		vpif_clr_bit(VPIF_CH2_CTRL, VPIF_CH2_CLIP_ANC_EN);
-		vpif_clr_bit(VPIF_CH2_CTRL, VPIF_CH2_CLIP_ACTIVE_EN);
-	}
-}
-
-/* function to enable clipping (for both active and blanking regions) on ch 2 */
-static inline void channel3_clipping_enable(int enable)
-{
-	if (enable) {
-		vpif_set_bit(VPIF_CH3_CTRL, VPIF_CH3_CLIP_ANC_EN);
-		vpif_set_bit(VPIF_CH3_CTRL, VPIF_CH3_CLIP_ACTIVE_EN);
-	} else {
-		vpif_clr_bit(VPIF_CH3_CTRL, VPIF_CH3_CLIP_ANC_EN);
-		vpif_clr_bit(VPIF_CH3_CTRL, VPIF_CH3_CLIP_ACTIVE_EN);
-	}
-}
-
-/* inline function to set buffer addresses in case of Y/C non mux mode */
-static inline void ch2_set_videobuf_addr_yc_nmux(unsigned long top_strt_luma,
-						 unsigned long btm_strt_luma,
-						 unsigned long top_strt_chroma,
-						 unsigned long btm_strt_chroma)
-{
-	regw(top_strt_luma, VPIF_CH2_TOP_STRT_ADD_LUMA);
-	regw(btm_strt_luma, VPIF_CH2_BTM_STRT_ADD_LUMA);
-	regw(top_strt_chroma, VPIF_CH3_TOP_STRT_ADD_CHROMA);
-	regw(btm_strt_chroma, VPIF_CH3_BTM_STRT_ADD_CHROMA);
-}
-
-/* inline function to set buffer addresses in VPIF registers for video data */
-static inline void ch2_set_videobuf_addr(unsigned long top_strt_luma,
-					 unsigned long btm_strt_luma,
-					 unsigned long top_strt_chroma,
-					 unsigned long btm_strt_chroma)
-{
-	regw(top_strt_luma, VPIF_CH2_TOP_STRT_ADD_LUMA);
-	regw(btm_strt_luma, VPIF_CH2_BTM_STRT_ADD_LUMA);
-	regw(top_strt_chroma, VPIF_CH2_TOP_STRT_ADD_CHROMA);
-	regw(btm_strt_chroma, VPIF_CH2_BTM_STRT_ADD_CHROMA);
-}
-
-static inline void ch3_set_videobuf_addr(unsigned long top_strt_luma,
-					 unsigned long btm_strt_luma,
-					 unsigned long top_strt_chroma,
-					 unsigned long btm_strt_chroma)
-{
-	regw(top_strt_luma, VPIF_CH3_TOP_STRT_ADD_LUMA);
-	regw(btm_strt_luma, VPIF_CH3_BTM_STRT_ADD_LUMA);
-	regw(top_strt_chroma, VPIF_CH3_TOP_STRT_ADD_CHROMA);
-	regw(btm_strt_chroma, VPIF_CH3_BTM_STRT_ADD_CHROMA);
-}
-
-/* inline function to set buffer addresses in VPIF registers for vbi data */
-static inline void ch2_set_vbi_addr(unsigned long top_strt_luma,
-					 unsigned long btm_strt_luma,
-					 unsigned long top_strt_chroma,
-					 unsigned long btm_strt_chroma)
-{
-	regw(top_strt_luma, VPIF_CH2_TOP_STRT_ADD_VANC);
-	regw(btm_strt_luma, VPIF_CH2_BTM_STRT_ADD_VANC);
-}
-
-static inline void ch3_set_vbi_addr(unsigned long top_strt_luma,
-					 unsigned long btm_strt_luma,
-					 unsigned long top_strt_chroma,
-					 unsigned long btm_strt_chroma)
-{
-	regw(top_strt_luma, VPIF_CH3_TOP_STRT_ADD_VANC);
-	regw(btm_strt_luma, VPIF_CH3_BTM_STRT_ADD_VANC);
-}
-
-static inline int vpif_intr_status(int channel)
-{
-	int status = 0;
-	int mask;
-
-	if (channel < 0 || channel > 3)
-		return 0;
-
-	mask = 1 << channel;
-	status = regr(VPIF_STATUS) & mask;
-	regw(status, VPIF_STATUS_CLR);
-
-	return status;
-}
-
-#define VPIF_MAX_NAME	(30)
-
-/* This structure will store size parameters as per the mode selected by user */
-struct vpif_channel_config_params {
-	char name[VPIF_MAX_NAME];	/* Name of the mode */
-	u16 width;			/* Indicates width of the image */
-	u16 height;			/* Indicates height of the image */
-	u8 frm_fmt;			/* Interlaced (0) or progressive (1) */
-	u8 ycmux_mode;			/* This mode requires one (0) or two (1)
-					   channels */
-	u16 eav2sav;			/* length of eav 2 sav */
-	u16 sav2eav;			/* length of sav 2 eav */
-	u16 l1, l3, l5, l7, l9, l11;	/* Other parameter configurations */
-	u16 vsize;			/* Vertical size of the image */
-	u8 capture_format;		/* Indicates whether capture format
-					 * is in BT or in CCD/CMOS */
-	u8  vbi_supported;		/* Indicates whether this mode
-					 * supports capturing vbi or not */
-	u8 hd_sd;			/* HDTV (1) or SDTV (0) format */
-	v4l2_std_id stdid;		/* SDTV format */
-	u32 dv_preset;			/* HDTV format */
-};
-
-extern const unsigned int vpif_ch_params_count;
-extern const struct vpif_channel_config_params ch_params[];
-
-struct vpif_video_params;
-struct vpif_params;
-struct vpif_vbi_params;
-
-int vpif_set_video_params(struct vpif_params *vpifparams, u8 channel_id);
-void vpif_set_vbi_display_params(struct vpif_vbi_params *vbiparams,
-							u8 channel_id);
-int vpif_channel_getfid(u8 channel_id);
-
-enum data_size {
-	_8BITS = 0,
-	_10BITS,
-	_12BITS,
-};
-
-/* Structure for vpif parameters for raw vbi data */
-struct vpif_vbi_params {
-	__u32 hstart0;  /* Horizontal start of raw vbi data for first field */
-	__u32 vstart0;  /* Vertical start of raw vbi data for first field */
-	__u32 hsize0;   /* Horizontal size of raw vbi data for first field */
-	__u32 vsize0;   /* Vertical size of raw vbi data for first field */
-	__u32 hstart1;  /* Horizontal start of raw vbi data for second field */
-	__u32 vstart1;  /* Vertical start of raw vbi data for second field */
-	__u32 hsize1;   /* Horizontal size of raw vbi data for second field */
-	__u32 vsize1;   /* Vertical size of raw vbi data for second field */
-};
-
-/* structure for vpif parameters */
-struct vpif_video_params {
-	__u8 storage_mode;	/* Indicates field or frame mode */
-	unsigned long hpitch;
-	v4l2_std_id stdid;
-};
-
-struct vpif_params {
-	struct vpif_interface iface;
-	struct vpif_video_params video_params;
-	struct vpif_channel_config_params std_info;
-	union param {
-		struct vpif_vbi_params	vbi_params;
-		enum data_size data_sz;
-	} params;
-};
-
-#endif				/* End of #ifndef VPIF_H */
-
diff --git a/drivers/media/video/davinci/vpif_capture.c b/drivers/media/video/davinci/vpif_capture.c
deleted file mode 100644
index 1b625b065c3..00000000000
--- a/drivers/media/video/davinci/vpif_capture.c
+++ /dev/null
@@ -1,2456 +0,0 @@
-/*
- * Copyright (C) 2009 Texas Instruments Inc
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
- *
- * TODO : add support for VBI & HBI data service
- *	  add static buffer allocation
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/errno.h>
-#include <linux/fs.h>
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <linux/workqueue.h>
-#include <linux/string.h>
-#include <linux/videodev2.h>
-#include <linux/wait.h>
-#include <linux/time.h>
-#include <linux/i2c.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-#include <media/v4l2-device.h>
-#include <media/v4l2-ioctl.h>
-#include <media/v4l2-chip-ident.h>
-
-#include "vpif_capture.h"
-#include "vpif.h"
-
-MODULE_DESCRIPTION("TI DaVinci VPIF Capture driver");
-MODULE_LICENSE("GPL");
-MODULE_VERSION(VPIF_CAPTURE_VERSION);
-
-#define vpif_err(fmt, arg...)	v4l2_err(&vpif_obj.v4l2_dev, fmt, ## arg)
-#define vpif_dbg(level, debug, fmt, arg...)	\
-		v4l2_dbg(level, debug, &vpif_obj.v4l2_dev, fmt, ## arg)
-
-static int debug = 1;
-static u32 ch0_numbuffers = 3;
-static u32 ch1_numbuffers = 3;
-static u32 ch0_bufsize = 1920 * 1080 * 2;
-static u32 ch1_bufsize = 720 * 576 * 2;
-
-module_param(debug, int, 0644);
-module_param(ch0_numbuffers, uint, S_IRUGO);
-module_param(ch1_numbuffers, uint, S_IRUGO);
-module_param(ch0_bufsize, uint, S_IRUGO);
-module_param(ch1_bufsize, uint, S_IRUGO);
-
-MODULE_PARM_DESC(debug, "Debug level 0-1");
-MODULE_PARM_DESC(ch2_numbuffers, "Channel0 buffer count (default:3)");
-MODULE_PARM_DESC(ch3_numbuffers, "Channel1 buffer count (default:3)");
-MODULE_PARM_DESC(ch2_bufsize, "Channel0 buffer size (default:1920 x 1080 x 2)");
-MODULE_PARM_DESC(ch3_bufsize, "Channel1 buffer size (default:720 x 576 x 2)");
-
-static struct vpif_config_params config_params = {
-	.min_numbuffers = 3,
-	.numbuffers[0] = 3,
-	.numbuffers[1] = 3,
-	.min_bufsize[0] = 720 * 480 * 2,
-	.min_bufsize[1] = 720 * 480 * 2,
-	.channel_bufsize[0] = 1920 * 1080 * 2,
-	.channel_bufsize[1] = 720 * 576 * 2,
-};
-
-/* global variables */
-static struct vpif_device vpif_obj = { {NULL} };
-static struct device *vpif_dev;
-static void vpif_calculate_offsets(struct channel_obj *ch);
-static void vpif_config_addr(struct channel_obj *ch, int muxmode);
-
-/**
- * buffer_prepare :  callback function for buffer prepare
- * @vb: ptr to vb2_buffer
- *
- * This is the callback function for buffer prepare when vb2_qbuf()
- * function is called. The buffer is prepared and user space virtual address
- * or user address is converted into  physical address
- */
-static int vpif_buffer_prepare(struct vb2_buffer *vb)
-{
-	/* Get the file handle object and channel object */
-	struct vpif_fh *fh = vb2_get_drv_priv(vb->vb2_queue);
-	struct vb2_queue *q = vb->vb2_queue;
-	struct channel_obj *ch = fh->channel;
-	struct common_obj *common;
-	unsigned long addr;
-
-	vpif_dbg(2, debug, "vpif_buffer_prepare\n");
-
-	common = &ch->common[VPIF_VIDEO_INDEX];
-
-	if (vb->state != VB2_BUF_STATE_ACTIVE &&
-		vb->state != VB2_BUF_STATE_PREPARED) {
-		vb2_set_plane_payload(vb, 0, common->fmt.fmt.pix.sizeimage);
-		if (vb2_plane_vaddr(vb, 0) &&
-		vb2_get_plane_payload(vb, 0) > vb2_plane_size(vb, 0))
-			goto exit;
-		addr = vb2_dma_contig_plane_dma_addr(vb, 0);
-
-		if (q->streaming) {
-			if (!IS_ALIGNED((addr + common->ytop_off), 8) ||
-				!IS_ALIGNED((addr + common->ybtm_off), 8) ||
-				!IS_ALIGNED((addr + common->ctop_off), 8) ||
-				!IS_ALIGNED((addr + common->cbtm_off), 8))
-				goto exit;
-		}
-	}
-	return 0;
-exit:
-	vpif_dbg(1, debug, "buffer_prepare:offset is not aligned to 8 bytes\n");
-	return -EINVAL;
-}
-
-/**
- * vpif_buffer_queue_setup : Callback function for buffer setup.
- * @vq: vb2_queue ptr
- * @fmt: v4l2 format
- * @nbuffers: ptr to number of buffers requested by application
- * @nplanes:: contains number of distinct video planes needed to hold a frame
- * @sizes[]: contains the size (in bytes) of each plane.
- * @alloc_ctxs: ptr to allocation context
- *
- * This callback function is called when reqbuf() is called to adjust
- * the buffer count and buffer size
- */
-static int vpif_buffer_queue_setup(struct vb2_queue *vq,
-				const struct v4l2_format *fmt,
-				unsigned int *nbuffers, unsigned int *nplanes,
-				unsigned int sizes[], void *alloc_ctxs[])
-{
-	/* Get the file handle object and channel object */
-	struct vpif_fh *fh = vb2_get_drv_priv(vq);
-	struct channel_obj *ch = fh->channel;
-	struct common_obj *common;
-	unsigned long size;
-
-	common = &ch->common[VPIF_VIDEO_INDEX];
-
-	vpif_dbg(2, debug, "vpif_buffer_setup\n");
-
-	/* If memory type is not mmap, return */
-	if (V4L2_MEMORY_MMAP == common->memory) {
-		/* Calculate the size of the buffer */
-		size = config_params.channel_bufsize[ch->channel_id];
-		/*
-		 * Checking if the buffer size exceeds the available buffer
-		 * ycmux_mode = 0 means 1 channel mode HD and
-		 * ycmux_mode = 1 means 2 channels mode SD
-		 */
-		if (ch->vpifparams.std_info.ycmux_mode == 0) {
-			if (config_params.video_limit[ch->channel_id])
-				while (size * *nbuffers >
-					(config_params.video_limit[0]
-						+ config_params.video_limit[1]))
-					(*nbuffers)--;
-		} else {
-			if (config_params.video_limit[ch->channel_id])
-				while (size * *nbuffers >
-				config_params.video_limit[ch->channel_id])
-					(*nbuffers)--;
-		}
-
-	} else {
-		size = common->fmt.fmt.pix.sizeimage;
-	}
-
-	if (*nbuffers < config_params.min_numbuffers)
-		*nbuffers = config_params.min_numbuffers;
-
-	*nplanes = 1;
-	sizes[0] = size;
-	alloc_ctxs[0] = common->alloc_ctx;
-
-	return 0;
-}
-
-/**
- * vpif_buffer_queue : Callback function to add buffer to DMA queue
- * @vb: ptr to vb2_buffer
- */
-static void vpif_buffer_queue(struct vb2_buffer *vb)
-{
-	/* Get the file handle object and channel object */
-	struct vpif_fh *fh = vb2_get_drv_priv(vb->vb2_queue);
-	struct channel_obj *ch = fh->channel;
-	struct vpif_cap_buffer *buf = container_of(vb,
-				struct vpif_cap_buffer, vb);
-	struct common_obj *common;
-
-	common = &ch->common[VPIF_VIDEO_INDEX];
-
-	vpif_dbg(2, debug, "vpif_buffer_queue\n");
-
-	/* add the buffer to the DMA queue */
-	list_add_tail(&buf->list, &common->dma_queue);
-}
-
-/**
- * vpif_buf_cleanup : Callback function to free buffer
- * @vb: ptr to vb2_buffer
- *
- * This function is called from the videobuf2 layer to free memory
- * allocated to  the buffers
- */
-static void vpif_buf_cleanup(struct vb2_buffer *vb)
-{
-	/* Get the file handle object and channel object */
-	struct vpif_fh *fh = vb2_get_drv_priv(vb->vb2_queue);
-	struct vpif_cap_buffer *buf = container_of(vb,
-					struct vpif_cap_buffer, vb);
-	struct channel_obj *ch = fh->channel;
-	struct common_obj *common;
-	unsigned long flags;
-
-	common = &ch->common[VPIF_VIDEO_INDEX];
-
-	spin_lock_irqsave(&common->irqlock, flags);
-	if (vb->state == VB2_BUF_STATE_ACTIVE)
-		list_del_init(&buf->list);
-	spin_unlock_irqrestore(&common->irqlock, flags);
-
-}
-
-static void vpif_wait_prepare(struct vb2_queue *vq)
-{
-	struct vpif_fh *fh = vb2_get_drv_priv(vq);
-	struct channel_obj *ch = fh->channel;
-	struct common_obj *common;
-
-	common = &ch->common[VPIF_VIDEO_INDEX];
-	mutex_unlock(&common->lock);
-}
-
-static void vpif_wait_finish(struct vb2_queue *vq)
-{
-	struct vpif_fh *fh = vb2_get_drv_priv(vq);
-	struct channel_obj *ch = fh->channel;
-	struct common_obj *common;
-
-	common = &ch->common[VPIF_VIDEO_INDEX];
-	mutex_lock(&common->lock);
-}
-
-static int vpif_buffer_init(struct vb2_buffer *vb)
-{
-	struct vpif_cap_buffer *buf = container_of(vb,
-					struct vpif_cap_buffer, vb);
-
-	INIT_LIST_HEAD(&buf->list);
-
-	return 0;
-}
-
-static u8 channel_first_int[VPIF_NUMBER_OF_OBJECTS][2] =
-	{ {1, 1} };
-
-static int vpif_start_streaming(struct vb2_queue *vq, unsigned int count)
-{
-	struct vpif_capture_config *vpif_config_data =
-					vpif_dev->platform_data;
-	struct vpif_fh *fh = vb2_get_drv_priv(vq);
-	struct channel_obj *ch = fh->channel;
-	struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX];
-	struct vpif_params *vpif = &ch->vpifparams;
-	unsigned long addr = 0;
-	int ret;
-
-		/* If buffer queue is empty, return error */
-	if (list_empty(&common->dma_queue)) {
-		vpif_dbg(1, debug, "buffer queue is empty\n");
-		return -EIO;
-	}
-
-	/* Get the next frame from the buffer queue */
-	common->cur_frm = common->next_frm = list_entry(common->dma_queue.next,
-				    struct vpif_cap_buffer, list);
-	/* Remove buffer from the buffer queue */
-	list_del(&common->cur_frm->list);
-	/* Mark state of the current frame to active */
-	common->cur_frm->vb.state = VB2_BUF_STATE_ACTIVE;
-	/* Initialize field_id and started member */
-	ch->field_id = 0;
-	common->started = 1;
-	addr = vb2_dma_contig_plane_dma_addr(&common->cur_frm->vb, 0);
-
-	/* Calculate the offset for Y and C data in the buffer */
-	vpif_calculate_offsets(ch);
-
-	if ((vpif->std_info.frm_fmt &&
-	    ((common->fmt.fmt.pix.field != V4L2_FIELD_NONE) &&
-	     (common->fmt.fmt.pix.field != V4L2_FIELD_ANY))) ||
-	    (!vpif->std_info.frm_fmt &&
-	     (common->fmt.fmt.pix.field == V4L2_FIELD_NONE))) {
-		vpif_dbg(1, debug, "conflict in field format and std format\n");
-		return -EINVAL;
-	}
-
-	/* configure 1 or 2 channel mode */
-	ret = vpif_config_data->setup_input_channel_mode
-					(vpif->std_info.ycmux_mode);
-
-	if (ret < 0) {
-		vpif_dbg(1, debug, "can't set vpif channel mode\n");
-		return ret;
-	}
-
-	/* Call vpif_set_params function to set the parameters and addresses */
-	ret = vpif_set_video_params(vpif, ch->channel_id);
-
-	if (ret < 0) {
-		vpif_dbg(1, debug, "can't set video params\n");
-		return ret;
-	}
-
-	common->started = ret;
-	vpif_config_addr(ch, ret);
-
-	common->set_addr(addr + common->ytop_off,
-			 addr + common->ybtm_off,
-			 addr + common->ctop_off,
-			 addr + common->cbtm_off);
-
-	/**
-	 * Set interrupt for both the fields in VPIF Register enable channel in
-	 * VPIF register
-	 */
-	if ((VPIF_CHANNEL0_VIDEO == ch->channel_id)) {
-		channel0_intr_assert();
-		channel0_intr_enable(1);
-		enable_channel0(1);
-	}
-	if ((VPIF_CHANNEL1_VIDEO == ch->channel_id) ||
-	    (common->started == 2)) {
-		channel1_intr_assert();
-		channel1_intr_enable(1);
-		enable_channel1(1);
-	}
-	channel_first_int[VPIF_VIDEO_INDEX][ch->channel_id] = 1;
-
-	return 0;
-}
-
-/* abort streaming and wait for last buffer */
-static int vpif_stop_streaming(struct vb2_queue *vq)
-{
-	struct vpif_fh *fh = vb2_get_drv_priv(vq);
-	struct channel_obj *ch = fh->channel;
-	struct common_obj *common;
-
-	if (!vb2_is_streaming(vq))
-		return 0;
-
-	common = &ch->common[VPIF_VIDEO_INDEX];
-
-	/* release all active buffers */
-	while (!list_empty(&common->dma_queue)) {
-		common->next_frm = list_entry(common->dma_queue.next,
-						struct vpif_cap_buffer, list);
-		list_del(&common->next_frm->list);
-		vb2_buffer_done(&common->next_frm->vb, VB2_BUF_STATE_ERROR);
-	}
-
-	return 0;
-}
-
-static struct vb2_ops video_qops = {
-	.queue_setup		= vpif_buffer_queue_setup,
-	.wait_prepare		= vpif_wait_prepare,
-	.wait_finish		= vpif_wait_finish,
-	.buf_init		= vpif_buffer_init,
-	.buf_prepare		= vpif_buffer_prepare,
-	.start_streaming	= vpif_start_streaming,
-	.stop_streaming		= vpif_stop_streaming,
-	.buf_cleanup		= vpif_buf_cleanup,
-	.buf_queue		= vpif_buffer_queue,
-};
-
-/**
- * vpif_process_buffer_complete: process a completed buffer
- * @common: ptr to common channel object
- *
- * This function time stamp the buffer and mark it as DONE. It also
- * wake up any process waiting on the QUEUE and set the next buffer
- * as current
- */
-static void vpif_process_buffer_complete(struct common_obj *common)
-{
-	do_gettimeofday(&common->cur_frm->vb.v4l2_buf.timestamp);
-	vb2_buffer_done(&common->cur_frm->vb,
-					    VB2_BUF_STATE_DONE);
-	/* Make curFrm pointing to nextFrm */
-	common->cur_frm = common->next_frm;
-}
-
-/**
- * vpif_schedule_next_buffer: set next buffer address for capture
- * @common : ptr to common channel object
- *
- * This function will get next buffer from the dma queue and
- * set the buffer address in the vpif register for capture.
- * the buffer is marked active
- */
-static void vpif_schedule_next_buffer(struct common_obj *common)
-{
-	unsigned long addr = 0;
-
-	common->next_frm = list_entry(common->dma_queue.next,
-				     struct vpif_cap_buffer, list);
-	/* Remove that buffer from the buffer queue */
-	list_del(&common->next_frm->list);
-	common->next_frm->vb.state = VB2_BUF_STATE_ACTIVE;
-	addr = vb2_dma_contig_plane_dma_addr(&common->next_frm->vb, 0);
-
-	/* Set top and bottom field addresses in VPIF registers */
-	common->set_addr(addr + common->ytop_off,
-			 addr + common->ybtm_off,
-			 addr + common->ctop_off,
-			 addr + common->cbtm_off);
-}
-
-/**
- * vpif_channel_isr : ISR handler for vpif capture
- * @irq: irq number
- * @dev_id: dev_id ptr
- *
- * It changes status of the captured buffer, takes next buffer from the queue
- * and sets its address in VPIF registers
- */
-static irqreturn_t vpif_channel_isr(int irq, void *dev_id)
-{
-	struct vpif_device *dev = &vpif_obj;
-	struct common_obj *common;
-	struct channel_obj *ch;
-	enum v4l2_field field;
-	int channel_id = 0;
-	int fid = -1, i;
-
-	channel_id = *(int *)(dev_id);
-	if (!vpif_intr_status(channel_id))
-		return IRQ_NONE;
-
-	ch = dev->dev[channel_id];
-
-	field = ch->common[VPIF_VIDEO_INDEX].fmt.fmt.pix.field;
-
-	for (i = 0; i < VPIF_NUMBER_OF_OBJECTS; i++) {
-		common = &ch->common[i];
-		/* skip If streaming is not started in this channel */
-		if (0 == common->started)
-			continue;
-
-		/* Check the field format */
-		if (1 == ch->vpifparams.std_info.frm_fmt) {
-			/* Progressive mode */
-			if (list_empty(&common->dma_queue))
-				continue;
-
-			if (!channel_first_int[i][channel_id])
-				vpif_process_buffer_complete(common);
-
-			channel_first_int[i][channel_id] = 0;
-
-			vpif_schedule_next_buffer(common);
-
-
-			channel_first_int[i][channel_id] = 0;
-		} else {
-			/**
-			 * Interlaced mode. If it is first interrupt, ignore
-			 * it
-			 */
-			if (channel_first_int[i][channel_id]) {
-				channel_first_int[i][channel_id] = 0;
-				continue;
-			}
-			if (0 == i) {
-				ch->field_id ^= 1;
-				/* Get field id from VPIF registers */
-				fid = vpif_channel_getfid(ch->channel_id);
-				if (fid != ch->field_id) {
-					/**
-					 * If field id does not match stored
-					 * field id, make them in sync
-					 */
-					if (0 == fid)
-						ch->field_id = fid;
-					return IRQ_HANDLED;
-				}
-			}
-			/* device field id and local field id are in sync */
-			if (0 == fid) {
-				/* this is even field */
-				if (common->cur_frm == common->next_frm)
-					continue;
-
-				/* mark the current buffer as done */
-				vpif_process_buffer_complete(common);
-			} else if (1 == fid) {
-				/* odd field */
-				if (list_empty(&common->dma_queue) ||
-				    (common->cur_frm != common->next_frm))
-					continue;
-
-				vpif_schedule_next_buffer(common);
-			}
-		}
-	}
-	return IRQ_HANDLED;
-}
-
-/**
- * vpif_update_std_info() - update standard related info
- * @ch: ptr to channel object
- *
- * For a given standard selected by application, update values
- * in the device data structures
- */
-static int vpif_update_std_info(struct channel_obj *ch)
-{
-	struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX];
-	struct vpif_params *vpifparams = &ch->vpifparams;
-	const struct vpif_channel_config_params *config;
-	struct vpif_channel_config_params *std_info = &vpifparams->std_info;
-	struct video_obj *vid_ch = &ch->video;
-	int index;
-
-	vpif_dbg(2, debug, "vpif_update_std_info\n");
-
-	for (index = 0; index < vpif_ch_params_count; index++) {
-		config = &ch_params[index];
-		if (config->hd_sd == 0) {
-			vpif_dbg(2, debug, "SD format\n");
-			if (config->stdid & vid_ch->stdid) {
-				memcpy(std_info, config, sizeof(*config));
-				break;
-			}
-		} else {
-			vpif_dbg(2, debug, "HD format\n");
-			if (config->dv_preset == vid_ch->dv_preset) {
-				memcpy(std_info, config, sizeof(*config));
-				break;
-			}
-		}
-	}
-
-	/* standard not found */
-	if (index == vpif_ch_params_count)
-		return -EINVAL;
-
-	common->fmt.fmt.pix.width = std_info->width;
-	common->width = std_info->width;
-	common->fmt.fmt.pix.height = std_info->height;
-	common->height = std_info->height;
-	common->fmt.fmt.pix.bytesperline = std_info->width;
-	vpifparams->video_params.hpitch = std_info->width;
-	vpifparams->video_params.storage_mode = std_info->frm_fmt;
-
-	return 0;
-}
-
-/**
- * vpif_calculate_offsets : This function calculates buffers offsets
- * @ch : ptr to channel object
- *
- * This function calculates buffer offsets for Y and C in the top and
- * bottom field
- */
-static void vpif_calculate_offsets(struct channel_obj *ch)
-{
-	unsigned int hpitch, vpitch, sizeimage;
-	struct video_obj *vid_ch = &(ch->video);
-	struct vpif_params *vpifparams = &ch->vpifparams;
-	struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX];
-	enum v4l2_field field = common->fmt.fmt.pix.field;
-
-	vpif_dbg(2, debug, "vpif_calculate_offsets\n");
-
-	if (V4L2_FIELD_ANY == field) {
-		if (vpifparams->std_info.frm_fmt)
-			vid_ch->buf_field = V4L2_FIELD_NONE;
-		else
-			vid_ch->buf_field = V4L2_FIELD_INTERLACED;
-	} else
-		vid_ch->buf_field = common->fmt.fmt.pix.field;
-
-	sizeimage = common->fmt.fmt.pix.sizeimage;
-
-	hpitch = common->fmt.fmt.pix.bytesperline;
-	vpitch = sizeimage / (hpitch * 2);
-
-	if ((V4L2_FIELD_NONE == vid_ch->buf_field) ||
-	    (V4L2_FIELD_INTERLACED == vid_ch->buf_field)) {
-		/* Calculate offsets for Y top, Y Bottom, C top and C Bottom */
-		common->ytop_off = 0;
-		common->ybtm_off = hpitch;
-		common->ctop_off = sizeimage / 2;
-		common->cbtm_off = sizeimage / 2 + hpitch;
-	} else if (V4L2_FIELD_SEQ_TB == vid_ch->buf_field) {
-		/* Calculate offsets for Y top, Y Bottom, C top and C Bottom */
-		common->ytop_off = 0;
-		common->ybtm_off = sizeimage / 4;
-		common->ctop_off = sizeimage / 2;
-		common->cbtm_off = common->ctop_off + sizeimage / 4;
-	} else if (V4L2_FIELD_SEQ_BT == vid_ch->buf_field) {
-		/* Calculate offsets for Y top, Y Bottom, C top and C Bottom */
-		common->ybtm_off = 0;
-		common->ytop_off = sizeimage / 4;
-		common->cbtm_off = sizeimage / 2;
-		common->ctop_off = common->cbtm_off + sizeimage / 4;
-	}
-	if ((V4L2_FIELD_NONE == vid_ch->buf_field) ||
-	    (V4L2_FIELD_INTERLACED == vid_ch->buf_field))
-		vpifparams->video_params.storage_mode = 1;
-	else
-		vpifparams->video_params.storage_mode = 0;
-
-	if (1 == vpifparams->std_info.frm_fmt)
-		vpifparams->video_params.hpitch =
-		    common->fmt.fmt.pix.bytesperline;
-	else {
-		if ((field == V4L2_FIELD_ANY)
-		    || (field == V4L2_FIELD_INTERLACED))
-			vpifparams->video_params.hpitch =
-			    common->fmt.fmt.pix.bytesperline * 2;
-		else
-			vpifparams->video_params.hpitch =
-			    common->fmt.fmt.pix.bytesperline;
-	}
-
-	ch->vpifparams.video_params.stdid = vpifparams->std_info.stdid;
-}
-
-/**
- * vpif_config_format: configure default frame format in the device
- * ch : ptr to channel object
- */
-static void vpif_config_format(struct channel_obj *ch)
-{
-	struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX];
-
-	vpif_dbg(2, debug, "vpif_config_format\n");
-
-	common->fmt.fmt.pix.field = V4L2_FIELD_ANY;
-	if (config_params.numbuffers[ch->channel_id] == 0)
-		common->memory = V4L2_MEMORY_USERPTR;
-	else
-		common->memory = V4L2_MEMORY_MMAP;
-
-	common->fmt.fmt.pix.sizeimage
-	    = config_params.channel_bufsize[ch->channel_id];
-
-	if (ch->vpifparams.iface.if_type == VPIF_IF_RAW_BAYER)
-		common->fmt.fmt.pix.pixelformat = V4L2_PIX_FMT_SBGGR8;
-	else
-		common->fmt.fmt.pix.pixelformat = V4L2_PIX_FMT_YUV422P;
-	common->fmt.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
-}
-
-/**
- * vpif_get_default_field() - Get default field type based on interface
- * @vpif_params - ptr to vpif params
- */
-static inline enum v4l2_field vpif_get_default_field(
-				struct vpif_interface *iface)
-{
-	return (iface->if_type == VPIF_IF_RAW_BAYER) ? V4L2_FIELD_NONE :
-						V4L2_FIELD_INTERLACED;
-}
-
-/**
- * vpif_check_format()  - check given pixel format for compatibility
- * @ch - channel  ptr
- * @pixfmt - Given pixel format
- * @update - update the values as per hardware requirement
- *
- * Check the application pixel format for S_FMT and update the input
- * values as per hardware limits for TRY_FMT. The default pixel and
- * field format is selected based on interface type.
- */
-static int vpif_check_format(struct channel_obj *ch,
-			     struct v4l2_pix_format *pixfmt,
-			     int update)
-{
-	struct common_obj *common = &(ch->common[VPIF_VIDEO_INDEX]);
-	struct vpif_params *vpif_params = &ch->vpifparams;
-	enum v4l2_field field = pixfmt->field;
-	u32 sizeimage, hpitch, vpitch;
-	int ret = -EINVAL;
-
-	vpif_dbg(2, debug, "vpif_check_format\n");
-	/**
-	 * first check for the pixel format. If if_type is Raw bayer,
-	 * only V4L2_PIX_FMT_SBGGR8 format is supported. Otherwise only
-	 * V4L2_PIX_FMT_YUV422P is supported
-	 */
-	if (vpif_params->iface.if_type == VPIF_IF_RAW_BAYER) {
-		if (pixfmt->pixelformat != V4L2_PIX_FMT_SBGGR8) {
-			if (!update) {
-				vpif_dbg(2, debug, "invalid pix format\n");
-				goto exit;
-			}
-			pixfmt->pixelformat = V4L2_PIX_FMT_SBGGR8;
-		}
-	} else {
-		if (pixfmt->pixelformat != V4L2_PIX_FMT_YUV422P) {
-			if (!update) {
-				vpif_dbg(2, debug, "invalid pixel format\n");
-				goto exit;
-			}
-			pixfmt->pixelformat = V4L2_PIX_FMT_YUV422P;
-		}
-	}
-
-	if (!(VPIF_VALID_FIELD(field))) {
-		if (!update) {
-			vpif_dbg(2, debug, "invalid field format\n");
-			goto exit;
-		}
-		/**
-		 * By default use FIELD_NONE for RAW Bayer capture
-		 * and FIELD_INTERLACED for other interfaces
-		 */
-		field = vpif_get_default_field(&vpif_params->iface);
-	} else if (field == V4L2_FIELD_ANY)
-		/* unsupported field. Use default */
-		field = vpif_get_default_field(&vpif_params->iface);
-
-	/* validate the hpitch */
-	hpitch = pixfmt->bytesperline;
-	if (hpitch < vpif_params->std_info.width) {
-		if (!update) {
-			vpif_dbg(2, debug, "invalid hpitch\n");
-			goto exit;
-		}
-		hpitch = vpif_params->std_info.width;
-	}
-
-	sizeimage = pixfmt->sizeimage;
-
-	vpitch = sizeimage / (hpitch * 2);
-
-	/* validate the vpitch */
-	if (vpitch < vpif_params->std_info.height) {
-		if (!update) {
-			vpif_dbg(2, debug, "Invalid vpitch\n");
-			goto exit;
-		}
-		vpitch = vpif_params->std_info.height;
-	}
-
-	/* Check for 8 byte alignment */
-	if (!ALIGN(hpitch, 8)) {
-		if (!update) {
-			vpif_dbg(2, debug, "invalid pitch alignment\n");
-			goto exit;
-		}
-		/* adjust to next 8 byte boundary */
-		hpitch = (((hpitch + 7) / 8) * 8);
-	}
-	/* if update is set, modify the bytesperline and sizeimage */
-	if (update) {
-		pixfmt->bytesperline = hpitch;
-		pixfmt->sizeimage = hpitch * vpitch * 2;
-	}
-	/**
-	 * Image width and height is always based on current standard width and
-	 * height
-	 */
-	pixfmt->width = common->fmt.fmt.pix.width;
-	pixfmt->height = common->fmt.fmt.pix.height;
-	return 0;
-exit:
-	return ret;
-}
-
-/**
- * vpif_config_addr() - function to configure buffer address in vpif
- * @ch - channel ptr
- * @muxmode - channel mux mode
- */
-static void vpif_config_addr(struct channel_obj *ch, int muxmode)
-{
-	struct common_obj *common;
-
-	vpif_dbg(2, debug, "vpif_config_addr\n");
-
-	common = &(ch->common[VPIF_VIDEO_INDEX]);
-
-	if (VPIF_CHANNEL1_VIDEO == ch->channel_id)
-		common->set_addr = ch1_set_videobuf_addr;
-	else if (2 == muxmode)
-		common->set_addr = ch0_set_videobuf_addr_yc_nmux;
-	else
-		common->set_addr = ch0_set_videobuf_addr;
-}
-
-/**
- * vpif_mmap : It is used to map kernel space buffers into user spaces
- * @filep: file pointer
- * @vma: ptr to vm_area_struct
- */
-static int vpif_mmap(struct file *filep, struct vm_area_struct *vma)
-{
-	/* Get the channel object and file handle object */
-	struct vpif_fh *fh = filep->private_data;
-	struct channel_obj *ch = fh->channel;
-	struct common_obj *common = &(ch->common[VPIF_VIDEO_INDEX]);
-	int ret;
-
-	vpif_dbg(2, debug, "vpif_mmap\n");
-
-	if (mutex_lock_interruptible(&common->lock))
-		return -ERESTARTSYS;
-	ret = vb2_mmap(&common->buffer_queue, vma);
-	mutex_unlock(&common->lock);
-	return ret;
-}
-
-/**
- * vpif_poll: It is used for select/poll system call
- * @filep: file pointer
- * @wait: poll table to wait
- */
-static unsigned int vpif_poll(struct file *filep, poll_table * wait)
-{
-	struct vpif_fh *fh = filep->private_data;
-	struct channel_obj *channel = fh->channel;
-	struct common_obj *common = &(channel->common[VPIF_VIDEO_INDEX]);
-	unsigned int res = 0;
-
-	vpif_dbg(2, debug, "vpif_poll\n");
-
-	if (common->started) {
-		mutex_lock(&common->lock);
-		res = vb2_poll(&common->buffer_queue, filep, wait);
-		mutex_unlock(&common->lock);
-	}
-	return res;
-}
-
-/**
- * vpif_open : vpif open handler
- * @filep: file ptr
- *
- * It creates object of file handle structure and stores it in private_data
- * member of filepointer
- */
-static int vpif_open(struct file *filep)
-{
-	struct vpif_capture_config *config = vpif_dev->platform_data;
-	struct video_device *vdev = video_devdata(filep);
-	struct common_obj *common;
-	struct video_obj *vid_ch;
-	struct channel_obj *ch;
-	struct vpif_fh *fh;
-	int i;
-
-	vpif_dbg(2, debug, "vpif_open\n");
-
-	ch = video_get_drvdata(vdev);
-
-	vid_ch = &ch->video;
-	common = &ch->common[VPIF_VIDEO_INDEX];
-
-	if (NULL == ch->curr_subdev_info) {
-		/**
-		 * search through the sub device to see a registered
-		 * sub device and make it as current sub device
-		 */
-		for (i = 0; i < config->subdev_count; i++) {
-			if (vpif_obj.sd[i]) {
-				/* the sub device is registered */
-				ch->curr_subdev_info = &config->subdev_info[i];
-				/* make first input as the current input */
-				vid_ch->input_idx = 0;
-				break;
-			}
-		}
-		if (i == config->subdev_count) {
-			vpif_err("No sub device registered\n");
-			return -ENOENT;
-		}
-	}
-
-	/* Allocate memory for the file handle object */
-	fh = kzalloc(sizeof(struct vpif_fh), GFP_KERNEL);
-	if (NULL == fh) {
-		vpif_err("unable to allocate memory for file handle object\n");
-		return -ENOMEM;
-	}
-
-	if (mutex_lock_interruptible(&common->lock)) {
-		kfree(fh);
-		return -ERESTARTSYS;
-	}
-	/* store pointer to fh in private_data member of filep */
-	filep->private_data = fh;
-	fh->channel = ch;
-	fh->initialized = 0;
-	/* If decoder is not initialized. initialize it */
-	if (!ch->initialized) {
-		fh->initialized = 1;
-		ch->initialized = 1;
-		memset(&(ch->vpifparams), 0, sizeof(struct vpif_params));
-	}
-	/* Increment channel usrs counter */
-	ch->usrs++;
-	/* Set io_allowed member to false */
-	fh->io_allowed[VPIF_VIDEO_INDEX] = 0;
-	/* Initialize priority of this instance to default priority */
-	fh->prio = V4L2_PRIORITY_UNSET;
-	v4l2_prio_open(&ch->prio, &fh->prio);
-	mutex_unlock(&common->lock);
-	return 0;
-}
-
-/**
- * vpif_release : function to clean up file close
- * @filep: file pointer
- *
- * This function deletes buffer queue, frees the buffers and the vpif file
- * handle
- */
-static int vpif_release(struct file *filep)
-{
-	struct vpif_fh *fh = filep->private_data;
-	struct channel_obj *ch = fh->channel;
-	struct common_obj *common;
-
-	vpif_dbg(2, debug, "vpif_release\n");
-
-	common = &ch->common[VPIF_VIDEO_INDEX];
-
-	mutex_lock(&common->lock);
-	/* if this instance is doing IO */
-	if (fh->io_allowed[VPIF_VIDEO_INDEX]) {
-		/* Reset io_usrs member of channel object */
-		common->io_usrs = 0;
-		/* Disable channel as per its device type and channel id */
-		if (VPIF_CHANNEL0_VIDEO == ch->channel_id) {
-			enable_channel0(0);
-			channel0_intr_enable(0);
-		}
-		if ((VPIF_CHANNEL1_VIDEO == ch->channel_id) ||
-		    (2 == common->started)) {
-			enable_channel1(0);
-			channel1_intr_enable(0);
-		}
-		common->started = 0;
-		/* Free buffers allocated */
-		vb2_queue_release(&common->buffer_queue);
-		vb2_dma_contig_cleanup_ctx(common->alloc_ctx);
-	}
-
-	/* Decrement channel usrs counter */
-	ch->usrs--;
-
-	/* Close the priority */
-	v4l2_prio_close(&ch->prio, fh->prio);
-
-	if (fh->initialized)
-		ch->initialized = 0;
-
-	mutex_unlock(&common->lock);
-	filep->private_data = NULL;
-	kfree(fh);
-	return 0;
-}
-
-/**
- * vpif_reqbufs() - request buffer handler
- * @file: file ptr
- * @priv: file handle
- * @reqbuf: request buffer structure ptr
- */
-static int vpif_reqbufs(struct file *file, void *priv,
-			struct v4l2_requestbuffers *reqbuf)
-{
-	struct vpif_fh *fh = priv;
-	struct channel_obj *ch = fh->channel;
-	struct common_obj *common;
-	u8 index = 0;
-	struct vb2_queue *q;
-
-	vpif_dbg(2, debug, "vpif_reqbufs\n");
-
-	/**
-	 * This file handle has not initialized the channel,
-	 * It is not allowed to do settings
-	 */
-	if ((VPIF_CHANNEL0_VIDEO == ch->channel_id)
-	    || (VPIF_CHANNEL1_VIDEO == ch->channel_id)) {
-		if (!fh->initialized) {
-			vpif_dbg(1, debug, "Channel Busy\n");
-			return -EBUSY;
-		}
-	}
-
-	if (V4L2_BUF_TYPE_VIDEO_CAPTURE != reqbuf->type || !vpif_dev)
-		return -EINVAL;
-
-	index = VPIF_VIDEO_INDEX;
-
-	common = &ch->common[index];
-
-	if (0 != common->io_usrs)
-		return -EBUSY;
-
-	/* Initialize videobuf2 queue as per the buffer type */
-	common->alloc_ctx = vb2_dma_contig_init_ctx(vpif_dev);
-	if (!common->alloc_ctx) {
-		vpif_err("Failed to get the context\n");
-		return -EINVAL;
-	}
-	q = &common->buffer_queue;
-	q->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
-	q->io_modes = VB2_MMAP | VB2_USERPTR;
-	q->drv_priv = fh;
-	q->ops = &video_qops;
-	q->mem_ops = &vb2_dma_contig_memops;
-	q->buf_struct_size = sizeof(struct vpif_cap_buffer);
-
-	vb2_queue_init(q);
-
-	/* Set io allowed member of file handle to TRUE */
-	fh->io_allowed[index] = 1;
-	/* Increment io usrs member of channel object to 1 */
-	common->io_usrs = 1;
-	/* Store type of memory requested in channel object */
-	common->memory = reqbuf->memory;
-	INIT_LIST_HEAD(&common->dma_queue);
-
-	/* Allocate buffers */
-	return vb2_reqbufs(&common->buffer_queue, reqbuf);
-}
-
-/**
- * vpif_querybuf() - query buffer handler
- * @file: file ptr
- * @priv: file handle
- * @buf: v4l2 buffer structure ptr
- */
-static int vpif_querybuf(struct file *file, void *priv,
-				struct v4l2_buffer *buf)
-{
-	struct vpif_fh *fh = priv;
-	struct channel_obj *ch = fh->channel;
-	struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX];
-
-	vpif_dbg(2, debug, "vpif_querybuf\n");
-
-	if (common->fmt.type != buf->type)
-		return -EINVAL;
-
-	if (common->memory != V4L2_MEMORY_MMAP) {
-		vpif_dbg(1, debug, "Invalid memory\n");
-		return -EINVAL;
-	}
-
-	return vb2_querybuf(&common->buffer_queue, buf);
-}
-
-/**
- * vpif_qbuf() - query buffer handler
- * @file: file ptr
- * @priv: file handle
- * @buf: v4l2 buffer structure ptr
- */
-static int vpif_qbuf(struct file *file, void *priv, struct v4l2_buffer *buf)
-{
-
-	struct vpif_fh *fh = priv;
-	struct channel_obj *ch = fh->channel;
-	struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX];
-	struct v4l2_buffer tbuf = *buf;
-
-	vpif_dbg(2, debug, "vpif_qbuf\n");
-
-	if (common->fmt.type != tbuf.type) {
-		vpif_err("invalid buffer type\n");
-		return -EINVAL;
-	}
-
-	if (!fh->io_allowed[VPIF_VIDEO_INDEX]) {
-		vpif_err("fh io not allowed\n");
-		return -EACCES;
-	}
-
-	return vb2_qbuf(&common->buffer_queue, buf);
-}
-
-/**
- * vpif_dqbuf() - query buffer handler
- * @file: file ptr
- * @priv: file handle
- * @buf: v4l2 buffer structure ptr
- */
-static int vpif_dqbuf(struct file *file, void *priv, struct v4l2_buffer *buf)
-{
-	struct vpif_fh *fh = priv;
-	struct channel_obj *ch = fh->channel;
-	struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX];
-
-	vpif_dbg(2, debug, "vpif_dqbuf\n");
-
-	return vb2_dqbuf(&common->buffer_queue, buf,
-			 (file->f_flags & O_NONBLOCK));
-}
-
-/**
- * vpif_streamon() - streamon handler
- * @file: file ptr
- * @priv: file handle
- * @buftype: v4l2 buffer type
- */
-static int vpif_streamon(struct file *file, void *priv,
-				enum v4l2_buf_type buftype)
-{
-
-	struct vpif_fh *fh = priv;
-	struct channel_obj *ch = fh->channel;
-	struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX];
-	struct channel_obj *oth_ch = vpif_obj.dev[!ch->channel_id];
-	struct vpif_params *vpif;
-	int ret = 0;
-
-	vpif_dbg(2, debug, "vpif_streamon\n");
-
-	vpif = &ch->vpifparams;
-
-	if (buftype != V4L2_BUF_TYPE_VIDEO_CAPTURE) {
-		vpif_dbg(1, debug, "buffer type not supported\n");
-		return -EINVAL;
-	}
-
-	/* If file handle is not allowed IO, return error */
-	if (!fh->io_allowed[VPIF_VIDEO_INDEX]) {
-		vpif_dbg(1, debug, "io not allowed\n");
-		return -EACCES;
-	}
-
-	/* If Streaming is already started, return error */
-	if (common->started) {
-		vpif_dbg(1, debug, "channel->started\n");
-		return -EBUSY;
-	}
-
-	if ((ch->channel_id == VPIF_CHANNEL0_VIDEO &&
-	    oth_ch->common[VPIF_VIDEO_INDEX].started &&
-	    vpif->std_info.ycmux_mode == 0) ||
-	   ((ch->channel_id == VPIF_CHANNEL1_VIDEO) &&
-	    (2 == oth_ch->common[VPIF_VIDEO_INDEX].started))) {
-		vpif_dbg(1, debug, "other channel is being used\n");
-		return -EBUSY;
-	}
-
-	ret = vpif_check_format(ch, &common->fmt.fmt.pix, 0);
-	if (ret)
-		return ret;
-
-	/* Enable streamon on the sub device */
-	ret = v4l2_subdev_call(vpif_obj.sd[ch->curr_sd_index], video,
-				s_stream, 1);
-
-	if (ret && (ret != -ENOIOCTLCMD)) {
-		vpif_dbg(1, debug, "stream on failed in subdev\n");
-		return ret;
-	}
-
-	/* Call vb2_streamon to start streaming in videobuf2 */
-	ret = vb2_streamon(&common->buffer_queue, buftype);
-	if (ret) {
-		vpif_dbg(1, debug, "vb2_streamon\n");
-		return ret;
-	}
-
-	return ret;
-}
-
-/**
- * vpif_streamoff() - streamoff handler
- * @file: file ptr
- * @priv: file handle
- * @buftype: v4l2 buffer type
- */
-static int vpif_streamoff(struct file *file, void *priv,
-				enum v4l2_buf_type buftype)
-{
-
-	struct vpif_fh *fh = priv;
-	struct channel_obj *ch = fh->channel;
-	struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX];
-	int ret;
-
-	vpif_dbg(2, debug, "vpif_streamoff\n");
-
-	if (buftype != V4L2_BUF_TYPE_VIDEO_CAPTURE) {
-		vpif_dbg(1, debug, "buffer type not supported\n");
-		return -EINVAL;
-	}
-
-	/* If io is allowed for this file handle, return error */
-	if (!fh->io_allowed[VPIF_VIDEO_INDEX]) {
-		vpif_dbg(1, debug, "io not allowed\n");
-		return -EACCES;
-	}
-
-	/* If streaming is not started, return error */
-	if (!common->started) {
-		vpif_dbg(1, debug, "channel->started\n");
-		return -EINVAL;
-	}
-
-	/* disable channel */
-	if (VPIF_CHANNEL0_VIDEO == ch->channel_id) {
-		enable_channel0(0);
-		channel0_intr_enable(0);
-	} else {
-		enable_channel1(0);
-		channel1_intr_enable(0);
-	}
-
-	common->started = 0;
-
-	ret = v4l2_subdev_call(vpif_obj.sd[ch->curr_sd_index], video,
-				s_stream, 0);
-
-	if (ret && (ret != -ENOIOCTLCMD))
-		vpif_dbg(1, debug, "stream off failed in subdev\n");
-
-	return vb2_streamoff(&common->buffer_queue, buftype);
-}
-
-/**
- * vpif_map_sub_device_to_input() - Maps sub device to input
- * @ch - ptr to channel
- * @config - ptr to capture configuration
- * @input_index - Given input index from application
- * @sub_device_index - index into sd table
- *
- * lookup the sub device information for a given input index.
- * we report all the inputs to application. inputs table also
- * has sub device name for the each input
- */
-static struct vpif_subdev_info *vpif_map_sub_device_to_input(
-				struct channel_obj *ch,
-				struct vpif_capture_config *vpif_cfg,
-				int input_index,
-				int *sub_device_index)
-{
-	struct vpif_capture_chan_config *chan_cfg;
-	struct vpif_subdev_info *subdev_info = NULL;
-	const char *subdev_name = NULL;
-	int i;
-
-	vpif_dbg(2, debug, "vpif_map_sub_device_to_input\n");
-
-	chan_cfg = &vpif_cfg->chan_config[ch->channel_id];
-
-	/**
-	 * search through the inputs to find the sub device supporting
-	 * the input
-	 */
-	for (i = 0; i < chan_cfg->input_count; i++) {
-		/* For each sub device, loop through input */
-		if (i == input_index) {
-			subdev_name = chan_cfg->inputs[i].subdev_name;
-			break;
-		}
-	}
-
-	/* if reached maximum. return null */
-	if (i == chan_cfg->input_count || (NULL == subdev_name))
-		return subdev_info;
-
-	/* loop through the sub device list to get the sub device info */
-	for (i = 0; i < vpif_cfg->subdev_count; i++) {
-		subdev_info = &vpif_cfg->subdev_info[i];
-		if (!strcmp(subdev_info->name, subdev_name))
-			break;
-	}
-
-	if (i == vpif_cfg->subdev_count)
-		return subdev_info;
-
-	/* check if the sub device is registered */
-	if (NULL == vpif_obj.sd[i])
-		return NULL;
-
-	*sub_device_index = i;
-	return subdev_info;
-}
-
-/**
- * vpif_querystd() - querystd handler
- * @file: file ptr
- * @priv: file handle
- * @std_id: ptr to std id
- *
- * This function is called to detect standard at the selected input
- */
-static int vpif_querystd(struct file *file, void *priv, v4l2_std_id *std_id)
-{
-	struct vpif_fh *fh = priv;
-	struct channel_obj *ch = fh->channel;
-	int ret = 0;
-
-	vpif_dbg(2, debug, "vpif_querystd\n");
-
-	/* Call querystd function of decoder device */
-	ret = v4l2_subdev_call(vpif_obj.sd[ch->curr_sd_index], video,
-				querystd, std_id);
-	if (ret < 0)
-		vpif_dbg(1, debug, "Failed to set standard for sub devices\n");
-
-	return ret;
-}
-
-/**
- * vpif_g_std() - get STD handler
- * @file: file ptr
- * @priv: file handle
- * @std_id: ptr to std id
- */
-static int vpif_g_std(struct file *file, void *priv, v4l2_std_id *std)
-{
-	struct vpif_fh *fh = priv;
-	struct channel_obj *ch = fh->channel;
-
-	vpif_dbg(2, debug, "vpif_g_std\n");
-
-	*std = ch->video.stdid;
-	return 0;
-}
-
-/**
- * vpif_s_std() - set STD handler
- * @file: file ptr
- * @priv: file handle
- * @std_id: ptr to std id
- */
-static int vpif_s_std(struct file *file, void *priv, v4l2_std_id *std_id)
-{
-	struct vpif_fh *fh = priv;
-	struct channel_obj *ch = fh->channel;
-	struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX];
-	int ret = 0;
-
-	vpif_dbg(2, debug, "vpif_s_std\n");
-
-	if (common->started) {
-		vpif_err("streaming in progress\n");
-		return -EBUSY;
-	}
-
-	if ((VPIF_CHANNEL0_VIDEO == ch->channel_id) ||
-	    (VPIF_CHANNEL1_VIDEO == ch->channel_id)) {
-		if (!fh->initialized) {
-			vpif_dbg(1, debug, "Channel Busy\n");
-			return -EBUSY;
-		}
-	}
-
-	ret = v4l2_prio_check(&ch->prio, fh->prio);
-	if (0 != ret)
-		return ret;
-
-	fh->initialized = 1;
-
-	/* Call encoder subdevice function to set the standard */
-	ch->video.stdid = *std_id;
-	ch->video.dv_preset = V4L2_DV_INVALID;
-	memset(&ch->video.bt_timings, 0, sizeof(ch->video.bt_timings));
-
-	/* Get the information about the standard */
-	if (vpif_update_std_info(ch)) {
-		vpif_err("Error getting the standard info\n");
-		return -EINVAL;
-	}
-
-	/* Configure the default format information */
-	vpif_config_format(ch);
-
-	/* set standard in the sub device */
-	ret = v4l2_subdev_call(vpif_obj.sd[ch->curr_sd_index], core,
-				s_std, *std_id);
-	if (ret < 0)
-		vpif_dbg(1, debug, "Failed to set standard for sub devices\n");
-	return ret;
-}
-
-/**
- * vpif_enum_input() - ENUMINPUT handler
- * @file: file ptr
- * @priv: file handle
- * @input: ptr to input structure
- */
-static int vpif_enum_input(struct file *file, void *priv,
-				struct v4l2_input *input)
-{
-
-	struct vpif_capture_config *config = vpif_dev->platform_data;
-	struct vpif_capture_chan_config *chan_cfg;
-	struct vpif_fh *fh = priv;
-	struct channel_obj *ch = fh->channel;
-
-	chan_cfg = &config->chan_config[ch->channel_id];
-
-	if (input->index >= chan_cfg->input_count) {
-		vpif_dbg(1, debug, "Invalid input index\n");
-		return -EINVAL;
-	}
-
-	memcpy(input, &chan_cfg->inputs[input->index].input,
-		sizeof(*input));
-	return 0;
-}
-
-/**
- * vpif_g_input() - Get INPUT handler
- * @file: file ptr
- * @priv: file handle
- * @index: ptr to input index
- */
-static int vpif_g_input(struct file *file, void *priv, unsigned int *index)
-{
-	struct vpif_fh *fh = priv;
-	struct channel_obj *ch = fh->channel;
-	struct video_obj *vid_ch = &ch->video;
-
-	*index = vid_ch->input_idx;
-
-	return 0;
-}
-
-/**
- * vpif_s_input() - Set INPUT handler
- * @file: file ptr
- * @priv: file handle
- * @index: input index
- */
-static int vpif_s_input(struct file *file, void *priv, unsigned int index)
-{
-	struct vpif_capture_config *config = vpif_dev->platform_data;
-	struct vpif_capture_chan_config *chan_cfg;
-	struct vpif_fh *fh = priv;
-	struct channel_obj *ch = fh->channel;
-	struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX];
-	struct video_obj *vid_ch = &ch->video;
-	struct vpif_subdev_info *subdev_info;
-	int ret = 0, sd_index = 0;
-	u32 input = 0, output = 0;
-
-	chan_cfg = &config->chan_config[ch->channel_id];
-
-	if (common->started) {
-		vpif_err("Streaming in progress\n");
-		return -EBUSY;
-	}
-
-	if ((VPIF_CHANNEL0_VIDEO == ch->channel_id) ||
-	    (VPIF_CHANNEL1_VIDEO == ch->channel_id)) {
-		if (!fh->initialized) {
-			vpif_dbg(1, debug, "Channel Busy\n");
-			return -EBUSY;
-		}
-	}
-
-	ret = v4l2_prio_check(&ch->prio, fh->prio);
-	if (0 != ret)
-		return ret;
-
-	fh->initialized = 1;
-	subdev_info = vpif_map_sub_device_to_input(ch, config, index,
-						   &sd_index);
-	if (NULL == subdev_info) {
-		vpif_dbg(1, debug,
-			"couldn't lookup sub device for the input index\n");
-		return -EINVAL;
-	}
-
-	/* first setup input path from sub device to vpif */
-	if (config->setup_input_path) {
-		ret = config->setup_input_path(ch->channel_id,
-					       subdev_info->name);
-		if (ret < 0) {
-			vpif_dbg(1, debug, "couldn't setup input path for the"
-				" sub device %s, for input index %d\n",
-				subdev_info->name, index);
-			return ret;
-		}
-	}
-
-	if (subdev_info->can_route) {
-		input = subdev_info->input;
-		output = subdev_info->output;
-		ret = v4l2_subdev_call(vpif_obj.sd[sd_index], video, s_routing,
-					input, output, 0);
-		if (ret < 0) {
-			vpif_dbg(1, debug, "Failed to set input\n");
-			return ret;
-		}
-	}
-	vid_ch->input_idx = index;
-	ch->curr_subdev_info = subdev_info;
-	ch->curr_sd_index = sd_index;
-	/* copy interface parameters to vpif */
-	ch->vpifparams.iface = subdev_info->vpif_if;
-
-	/* update tvnorms from the sub device input info */
-	ch->video_dev->tvnorms = chan_cfg->inputs[index].input.std;
-	return ret;
-}
-
-/**
- * vpif_enum_fmt_vid_cap() - ENUM_FMT handler
- * @file: file ptr
- * @priv: file handle
- * @index: input index
- */
-static int vpif_enum_fmt_vid_cap(struct file *file, void  *priv,
-					struct v4l2_fmtdesc *fmt)
-{
-	struct vpif_fh *fh = priv;
-	struct channel_obj *ch = fh->channel;
-
-	if (fmt->index != 0) {
-		vpif_dbg(1, debug, "Invalid format index\n");
-		return -EINVAL;
-	}
-
-	/* Fill in the information about format */
-	if (ch->vpifparams.iface.if_type == VPIF_IF_RAW_BAYER) {
-		fmt->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
-		strcpy(fmt->description, "Raw Mode -Bayer Pattern GrRBGb");
-		fmt->pixelformat = V4L2_PIX_FMT_SBGGR8;
-	} else {
-		fmt->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
-		strcpy(fmt->description, "YCbCr4:2:2 YC Planar");
-		fmt->pixelformat = V4L2_PIX_FMT_YUV422P;
-	}
-	return 0;
-}
-
-/**
- * vpif_try_fmt_vid_cap() - TRY_FMT handler
- * @file: file ptr
- * @priv: file handle
- * @fmt: ptr to v4l2 format structure
- */
-static int vpif_try_fmt_vid_cap(struct file *file, void *priv,
-				struct v4l2_format *fmt)
-{
-	struct vpif_fh *fh = priv;
-	struct channel_obj *ch = fh->channel;
-	struct v4l2_pix_format *pixfmt = &fmt->fmt.pix;
-
-	return vpif_check_format(ch, pixfmt, 1);
-}
-
-
-/**
- * vpif_g_fmt_vid_cap() - Set INPUT handler
- * @file: file ptr
- * @priv: file handle
- * @fmt: ptr to v4l2 format structure
- */
-static int vpif_g_fmt_vid_cap(struct file *file, void *priv,
-				struct v4l2_format *fmt)
-{
-	struct vpif_fh *fh = priv;
-	struct channel_obj *ch = fh->channel;
-	struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX];
-
-	/* Check the validity of the buffer type */
-	if (common->fmt.type != fmt->type)
-		return -EINVAL;
-
-	/* Fill in the information about format */
-	*fmt = common->fmt;
-	return 0;
-}
-
-/**
- * vpif_s_fmt_vid_cap() - Set FMT handler
- * @file: file ptr
- * @priv: file handle
- * @fmt: ptr to v4l2 format structure
- */
-static int vpif_s_fmt_vid_cap(struct file *file, void *priv,
-				struct v4l2_format *fmt)
-{
-	struct vpif_fh *fh = priv;
-	struct channel_obj *ch = fh->channel;
-	struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX];
-	struct v4l2_pix_format *pixfmt;
-	int ret = 0;
-
-	vpif_dbg(2, debug, "%s\n", __func__);
-
-	/* If streaming is started, return error */
-	if (common->started) {
-		vpif_dbg(1, debug, "Streaming is started\n");
-		return -EBUSY;
-	}
-
-	if ((VPIF_CHANNEL0_VIDEO == ch->channel_id) ||
-	    (VPIF_CHANNEL1_VIDEO == ch->channel_id)) {
-		if (!fh->initialized) {
-			vpif_dbg(1, debug, "Channel Busy\n");
-			return -EBUSY;
-		}
-	}
-
-	ret = v4l2_prio_check(&ch->prio, fh->prio);
-	if (0 != ret)
-		return ret;
-
-	fh->initialized = 1;
-
-	pixfmt = &fmt->fmt.pix;
-	/* Check for valid field format */
-	ret = vpif_check_format(ch, pixfmt, 0);
-
-	if (ret)
-		return ret;
-	/* store the format in the channel object */
-	common->fmt = *fmt;
-	return 0;
-}
-
-/**
- * vpif_querycap() - QUERYCAP handler
- * @file: file ptr
- * @priv: file handle
- * @cap: ptr to v4l2_capability structure
- */
-static int vpif_querycap(struct file *file, void  *priv,
-				struct v4l2_capability *cap)
-{
-	struct vpif_capture_config *config = vpif_dev->platform_data;
-
-	cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING;
-	strlcpy(cap->driver, "vpif capture", sizeof(cap->driver));
-	strlcpy(cap->bus_info, "VPIF Platform", sizeof(cap->bus_info));
-	strlcpy(cap->card, config->card_name, sizeof(cap->card));
-
-	return 0;
-}
-
-/**
- * vpif_g_priority() - get priority handler
- * @file: file ptr
- * @priv: file handle
- * @prio: ptr to v4l2_priority structure
- */
-static int vpif_g_priority(struct file *file, void *priv,
-			   enum v4l2_priority *prio)
-{
-	struct vpif_fh *fh = priv;
-	struct channel_obj *ch = fh->channel;
-
-	*prio = v4l2_prio_max(&ch->prio);
-
-	return 0;
-}
-
-/**
- * vpif_s_priority() - set priority handler
- * @file: file ptr
- * @priv: file handle
- * @prio: ptr to v4l2_priority structure
- */
-static int vpif_s_priority(struct file *file, void *priv, enum v4l2_priority p)
-{
-	struct vpif_fh *fh = priv;
-	struct channel_obj *ch = fh->channel;
-
-	return v4l2_prio_change(&ch->prio, &fh->prio, p);
-}
-
-/**
- * vpif_cropcap() - cropcap handler
- * @file: file ptr
- * @priv: file handle
- * @crop: ptr to v4l2_cropcap structure
- */
-static int vpif_cropcap(struct file *file, void *priv,
-			struct v4l2_cropcap *crop)
-{
-	struct vpif_fh *fh = priv;
-	struct channel_obj *ch = fh->channel;
-	struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX];
-
-	if (V4L2_BUF_TYPE_VIDEO_CAPTURE != crop->type)
-		return -EINVAL;
-
-	crop->bounds.left = 0;
-	crop->bounds.top = 0;
-	crop->bounds.height = common->height;
-	crop->bounds.width = common->width;
-	crop->defrect = crop->bounds;
-	return 0;
-}
-
-/**
- * vpif_enum_dv_presets() - ENUM_DV_PRESETS handler
- * @file: file ptr
- * @priv: file handle
- * @preset: input preset
- */
-static int vpif_enum_dv_presets(struct file *file, void *priv,
-		struct v4l2_dv_enum_preset *preset)
-{
-	struct vpif_fh *fh = priv;
-	struct channel_obj *ch = fh->channel;
-
-	return v4l2_subdev_call(vpif_obj.sd[ch->curr_sd_index],
-			video, enum_dv_presets, preset);
-}
-
-/**
- * vpif_query_dv_presets() - QUERY_DV_PRESET handler
- * @file: file ptr
- * @priv: file handle
- * @preset: input preset
- */
-static int vpif_query_dv_preset(struct file *file, void *priv,
-		struct v4l2_dv_preset *preset)
-{
-	struct vpif_fh *fh = priv;
-	struct channel_obj *ch = fh->channel;
-
-	return v4l2_subdev_call(vpif_obj.sd[ch->curr_sd_index],
-		       video, query_dv_preset, preset);
-}
-/**
- * vpif_s_dv_presets() - S_DV_PRESETS handler
- * @file: file ptr
- * @priv: file handle
- * @preset: input preset
- */
-static int vpif_s_dv_preset(struct file *file, void *priv,
-		struct v4l2_dv_preset *preset)
-{
-	struct vpif_fh *fh = priv;
-	struct channel_obj *ch = fh->channel;
-	struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX];
-	int ret = 0;
-
-	if (common->started) {
-		vpif_dbg(1, debug, "streaming in progress\n");
-		return -EBUSY;
-	}
-
-	if ((VPIF_CHANNEL0_VIDEO == ch->channel_id) ||
-	    (VPIF_CHANNEL1_VIDEO == ch->channel_id)) {
-		if (!fh->initialized) {
-			vpif_dbg(1, debug, "Channel Busy\n");
-			return -EBUSY;
-		}
-	}
-
-	ret = v4l2_prio_check(&ch->prio, fh->prio);
-	if (ret)
-		return ret;
-
-	fh->initialized = 1;
-
-	/* Call encoder subdevice function to set the standard */
-	if (mutex_lock_interruptible(&common->lock))
-		return -ERESTARTSYS;
-
-	ch->video.dv_preset = preset->preset;
-	ch->video.stdid = V4L2_STD_UNKNOWN;
-	memset(&ch->video.bt_timings, 0, sizeof(ch->video.bt_timings));
-
-	/* Get the information about the standard */
-	if (vpif_update_std_info(ch)) {
-		vpif_dbg(1, debug, "Error getting the standard info\n");
-		ret = -EINVAL;
-	} else {
-		/* Configure the default format information */
-		vpif_config_format(ch);
-
-		ret = v4l2_subdev_call(vpif_obj.sd[ch->curr_sd_index],
-				video, s_dv_preset, preset);
-	}
-
-	mutex_unlock(&common->lock);
-
-	return ret;
-}
-/**
- * vpif_g_dv_presets() - G_DV_PRESETS handler
- * @file: file ptr
- * @priv: file handle
- * @preset: input preset
- */
-static int vpif_g_dv_preset(struct file *file, void *priv,
-		struct v4l2_dv_preset *preset)
-{
-	struct vpif_fh *fh = priv;
-	struct channel_obj *ch = fh->channel;
-
-	preset->preset = ch->video.dv_preset;
-
-	return 0;
-}
-
-/**
- * vpif_s_dv_timings() - S_DV_TIMINGS handler
- * @file: file ptr
- * @priv: file handle
- * @timings: digital video timings
- */
-static int vpif_s_dv_timings(struct file *file, void *priv,
-		struct v4l2_dv_timings *timings)
-{
-	struct vpif_fh *fh = priv;
-	struct channel_obj *ch = fh->channel;
-	struct vpif_params *vpifparams = &ch->vpifparams;
-	struct vpif_channel_config_params *std_info = &vpifparams->std_info;
-	struct video_obj *vid_ch = &ch->video;
-	struct v4l2_bt_timings *bt = &vid_ch->bt_timings;
-	int ret;
-
-	if (timings->type != V4L2_DV_BT_656_1120) {
-		vpif_dbg(2, debug, "Timing type not defined\n");
-		return -EINVAL;
-	}
-
-	/* Configure subdevice timings, if any */
-	ret = v4l2_subdev_call(vpif_obj.sd[ch->curr_sd_index],
-			video, s_dv_timings, timings);
-	if (ret == -ENOIOCTLCMD) {
-		vpif_dbg(2, debug, "Custom DV timings not supported by "
-				"subdevice\n");
-		return -EINVAL;
-	}
-	if (ret < 0) {
-		vpif_dbg(2, debug, "Error setting custom DV timings\n");
-		return ret;
-	}
-
-	if (!(timings->bt.width && timings->bt.height &&
-				(timings->bt.hbackporch ||
-				 timings->bt.hfrontporch ||
-				 timings->bt.hsync) &&
-				timings->bt.vfrontporch &&
-				(timings->bt.vbackporch ||
-				 timings->bt.vsync))) {
-		vpif_dbg(2, debug, "Timings for width, height, "
-				"horizontal back porch, horizontal sync, "
-				"horizontal front porch, vertical back porch, "
-				"vertical sync and vertical back porch "
-				"must be defined\n");
-		return -EINVAL;
-	}
-
-	*bt = timings->bt;
-
-	/* Configure video port timings */
-
-	std_info->eav2sav = bt->hbackporch + bt->hfrontporch +
-		bt->hsync - 8;
-	std_info->sav2eav = bt->width;
-
-	std_info->l1 = 1;
-	std_info->l3 = bt->vsync + bt->vbackporch + 1;
-
-	if (bt->interlaced) {
-		if (bt->il_vbackporch || bt->il_vfrontporch || bt->il_vsync) {
-			std_info->vsize = bt->height * 2 +
-				bt->vfrontporch + bt->vsync + bt->vbackporch +
-				bt->il_vfrontporch + bt->il_vsync +
-				bt->il_vbackporch;
-			std_info->l5 = std_info->vsize/2 -
-				(bt->vfrontporch - 1);
-			std_info->l7 = std_info->vsize/2 + 1;
-			std_info->l9 = std_info->l7 + bt->il_vsync +
-				bt->il_vbackporch + 1;
-			std_info->l11 = std_info->vsize -
-				(bt->il_vfrontporch - 1);
-		} else {
-			vpif_dbg(2, debug, "Required timing values for "
-					"interlaced BT format missing\n");
-			return -EINVAL;
-		}
-	} else {
-		std_info->vsize = bt->height + bt->vfrontporch +
-			bt->vsync + bt->vbackporch;
-		std_info->l5 = std_info->vsize - (bt->vfrontporch - 1);
-	}
-	strncpy(std_info->name, "Custom timings BT656/1120", VPIF_MAX_NAME);
-	std_info->width = bt->width;
-	std_info->height = bt->height;
-	std_info->frm_fmt = bt->interlaced ? 0 : 1;
-	std_info->ycmux_mode = 0;
-	std_info->capture_format = 0;
-	std_info->vbi_supported = 0;
-	std_info->hd_sd = 1;
-	std_info->stdid = 0;
-	std_info->dv_preset = V4L2_DV_INVALID;
-
-	vid_ch->stdid = 0;
-	vid_ch->dv_preset = V4L2_DV_INVALID;
-	return 0;
-}
-
-/**
- * vpif_g_dv_timings() - G_DV_TIMINGS handler
- * @file: file ptr
- * @priv: file handle
- * @timings: digital video timings
- */
-static int vpif_g_dv_timings(struct file *file, void *priv,
-		struct v4l2_dv_timings *timings)
-{
-	struct vpif_fh *fh = priv;
-	struct channel_obj *ch = fh->channel;
-	struct video_obj *vid_ch = &ch->video;
-	struct v4l2_bt_timings *bt = &vid_ch->bt_timings;
-
-	timings->bt = *bt;
-
-	return 0;
-}
-
-/*
- * vpif_g_chip_ident() - Identify the chip
- * @file: file ptr
- * @priv: file handle
- * @chip: chip identity
- *
- * Returns zero or -EINVAL if read operations fails.
- */
-static int vpif_g_chip_ident(struct file *file, void *priv,
-		struct v4l2_dbg_chip_ident *chip)
-{
-	chip->ident = V4L2_IDENT_NONE;
-	chip->revision = 0;
-	if (chip->match.type != V4L2_CHIP_MATCH_I2C_DRIVER &&
-			chip->match.type != V4L2_CHIP_MATCH_I2C_ADDR) {
-		vpif_dbg(2, debug, "match_type is invalid.\n");
-		return -EINVAL;
-	}
-
-	return v4l2_device_call_until_err(&vpif_obj.v4l2_dev, 0, core,
-			g_chip_ident, chip);
-}
-
-#ifdef CONFIG_VIDEO_ADV_DEBUG
-/*
- * vpif_dbg_g_register() - Read register
- * @file: file ptr
- * @priv: file handle
- * @reg: register to be read
- *
- * Debugging only
- * Returns zero or -EINVAL if read operations fails.
- */
-static int vpif_dbg_g_register(struct file *file, void *priv,
-		struct v4l2_dbg_register *reg){
-	struct vpif_fh *fh = priv;
-	struct channel_obj *ch = fh->channel;
-
-	return v4l2_subdev_call(vpif_obj.sd[ch->curr_sd_index], core,
-			g_register, reg);
-}
-
-/*
- * vpif_dbg_s_register() - Write to register
- * @file: file ptr
- * @priv: file handle
- * @reg: register to be modified
- *
- * Debugging only
- * Returns zero or -EINVAL if write operations fails.
- */
-static int vpif_dbg_s_register(struct file *file, void *priv,
-		struct v4l2_dbg_register *reg){
-	struct vpif_fh *fh = priv;
-	struct channel_obj *ch = fh->channel;
-
-	return v4l2_subdev_call(vpif_obj.sd[ch->curr_sd_index], core,
-			s_register, reg);
-}
-#endif
-
-/*
- * vpif_log_status() - Status information
- * @file: file ptr
- * @priv: file handle
- *
- * Returns zero.
- */
-static int vpif_log_status(struct file *filep, void *priv)
-{
-	/* status for sub devices */
-	v4l2_device_call_all(&vpif_obj.v4l2_dev, 0, core, log_status);
-
-	return 0;
-}
-
-/* vpif capture ioctl operations */
-static const struct v4l2_ioctl_ops vpif_ioctl_ops = {
-	.vidioc_querycap        	= vpif_querycap,
-	.vidioc_g_priority		= vpif_g_priority,
-	.vidioc_s_priority		= vpif_s_priority,
-	.vidioc_enum_fmt_vid_cap	= vpif_enum_fmt_vid_cap,
-	.vidioc_g_fmt_vid_cap  		= vpif_g_fmt_vid_cap,
-	.vidioc_s_fmt_vid_cap		= vpif_s_fmt_vid_cap,
-	.vidioc_try_fmt_vid_cap		= vpif_try_fmt_vid_cap,
-	.vidioc_enum_input		= vpif_enum_input,
-	.vidioc_s_input			= vpif_s_input,
-	.vidioc_g_input			= vpif_g_input,
-	.vidioc_reqbufs         	= vpif_reqbufs,
-	.vidioc_querybuf        	= vpif_querybuf,
-	.vidioc_querystd		= vpif_querystd,
-	.vidioc_s_std           	= vpif_s_std,
-	.vidioc_g_std			= vpif_g_std,
-	.vidioc_qbuf            	= vpif_qbuf,
-	.vidioc_dqbuf           	= vpif_dqbuf,
-	.vidioc_streamon        	= vpif_streamon,
-	.vidioc_streamoff       	= vpif_streamoff,
-	.vidioc_cropcap         	= vpif_cropcap,
-	.vidioc_enum_dv_presets         = vpif_enum_dv_presets,
-	.vidioc_s_dv_preset             = vpif_s_dv_preset,
-	.vidioc_g_dv_preset             = vpif_g_dv_preset,
-	.vidioc_query_dv_preset         = vpif_query_dv_preset,
-	.vidioc_s_dv_timings            = vpif_s_dv_timings,
-	.vidioc_g_dv_timings            = vpif_g_dv_timings,
-	.vidioc_g_chip_ident		= vpif_g_chip_ident,
-#ifdef CONFIG_VIDEO_ADV_DEBUG
-	.vidioc_g_register		= vpif_dbg_g_register,
-	.vidioc_s_register		= vpif_dbg_s_register,
-#endif
-	.vidioc_log_status		= vpif_log_status,
-};
-
-/* vpif file operations */
-static struct v4l2_file_operations vpif_fops = {
-	.owner = THIS_MODULE,
-	.open = vpif_open,
-	.release = vpif_release,
-	.unlocked_ioctl = video_ioctl2,
-	.mmap = vpif_mmap,
-	.poll = vpif_poll
-};
-
-/* vpif video template */
-static struct video_device vpif_video_template = {
-	.name		= "vpif",
-	.fops		= &vpif_fops,
-	.minor		= -1,
-	.ioctl_ops	= &vpif_ioctl_ops,
-};
-
-/**
- * initialize_vpif() - Initialize vpif data structures
- *
- * Allocate memory for data structures and initialize them
- */
-static int initialize_vpif(void)
-{
-	int err = 0, i, j;
-	int free_channel_objects_index;
-
-	/* Default number of buffers should be 3 */
-	if ((ch0_numbuffers > 0) &&
-	    (ch0_numbuffers < config_params.min_numbuffers))
-		ch0_numbuffers = config_params.min_numbuffers;
-	if ((ch1_numbuffers > 0) &&
-	    (ch1_numbuffers < config_params.min_numbuffers))
-		ch1_numbuffers = config_params.min_numbuffers;
-
-	/* Set buffer size to min buffers size if it is invalid */
-	if (ch0_bufsize < config_params.min_bufsize[VPIF_CHANNEL0_VIDEO])
-		ch0_bufsize =
-		    config_params.min_bufsize[VPIF_CHANNEL0_VIDEO];
-	if (ch1_bufsize < config_params.min_bufsize[VPIF_CHANNEL1_VIDEO])
-		ch1_bufsize =
-		    config_params.min_bufsize[VPIF_CHANNEL1_VIDEO];
-
-	config_params.numbuffers[VPIF_CHANNEL0_VIDEO] = ch0_numbuffers;
-	config_params.numbuffers[VPIF_CHANNEL1_VIDEO] = ch1_numbuffers;
-	if (ch0_numbuffers) {
-		config_params.channel_bufsize[VPIF_CHANNEL0_VIDEO]
-		    = ch0_bufsize;
-	}
-	if (ch1_numbuffers) {
-		config_params.channel_bufsize[VPIF_CHANNEL1_VIDEO]
-		    = ch1_bufsize;
-	}
-
-	/* Allocate memory for six channel objects */
-	for (i = 0; i < VPIF_CAPTURE_MAX_DEVICES; i++) {
-		vpif_obj.dev[i] =
-		    kzalloc(sizeof(*vpif_obj.dev[i]), GFP_KERNEL);
-		/* If memory allocation fails, return error */
-		if (!vpif_obj.dev[i]) {
-			free_channel_objects_index = i;
-			err = -ENOMEM;
-			goto vpif_init_free_channel_objects;
-		}
-	}
-	return 0;
-
-vpif_init_free_channel_objects:
-	for (j = 0; j < free_channel_objects_index; j++)
-		kfree(vpif_obj.dev[j]);
-	return err;
-}
-
-/**
- * vpif_probe : This function probes the vpif capture driver
- * @pdev: platform device pointer
- *
- * This creates device entries by register itself to the V4L2 driver and
- * initializes fields of each channel objects
- */
-static __init int vpif_probe(struct platform_device *pdev)
-{
-	struct vpif_subdev_info *subdevdata;
-	struct vpif_capture_config *config;
-	int i, j, k, m, q, err;
-	struct i2c_adapter *i2c_adap;
-	struct channel_obj *ch;
-	struct common_obj *common;
-	struct video_device *vfd;
-	struct resource *res;
-	int subdev_count;
-	size_t size;
-
-	vpif_dev = &pdev->dev;
-
-	err = initialize_vpif();
-	if (err) {
-		v4l2_err(vpif_dev->driver, "Error initializing vpif\n");
-		return err;
-	}
-
-	err = v4l2_device_register(vpif_dev, &vpif_obj.v4l2_dev);
-	if (err) {
-		v4l2_err(vpif_dev->driver, "Error registering v4l2 device\n");
-		return err;
-	}
-
-	k = 0;
-	while ((res = platform_get_resource(pdev, IORESOURCE_IRQ, k))) {
-		for (i = res->start; i <= res->end; i++) {
-			if (request_irq(i, vpif_channel_isr, IRQF_SHARED,
-					"VPIF_Capture",
-				(void *)(&vpif_obj.dev[k]->channel_id))) {
-				err = -EBUSY;
-				i--;
-				goto vpif_int_err;
-			}
-		}
-		k++;
-	}
-
-	for (i = 0; i < VPIF_CAPTURE_MAX_DEVICES; i++) {
-		/* Get the pointer to the channel object */
-		ch = vpif_obj.dev[i];
-		/* Allocate memory for video device */
-		vfd = video_device_alloc();
-		if (NULL == vfd) {
-			for (j = 0; j < i; j++) {
-				ch = vpif_obj.dev[j];
-				video_device_release(ch->video_dev);
-			}
-			err = -ENOMEM;
-			goto vpif_dev_alloc_err;
-		}
-
-		/* Initialize field of video device */
-		*vfd = vpif_video_template;
-		vfd->v4l2_dev = &vpif_obj.v4l2_dev;
-		vfd->release = video_device_release;
-		snprintf(vfd->name, sizeof(vfd->name),
-			 "VPIF_Capture_DRIVER_V%s",
-			 VPIF_CAPTURE_VERSION);
-		/* Set video_dev to the video device */
-		ch->video_dev = vfd;
-	}
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (res) {
-		size = resource_size(res);
-		/* The resources are divided into two equal memory and when we
-		 * have HD output we can add them together
-		 */
-		for (j = 0; j < VPIF_CAPTURE_MAX_DEVICES; j++) {
-			ch = vpif_obj.dev[j];
-			ch->channel_id = j;
-			/* only enabled if second resource exists */
-			config_params.video_limit[ch->channel_id] = 0;
-			if (size)
-				config_params.video_limit[ch->channel_id] =
-									size/2;
-		}
-	}
-
-	for (j = 0; j < VPIF_CAPTURE_MAX_DEVICES; j++) {
-		ch = vpif_obj.dev[j];
-		ch->channel_id = j;
-		common = &(ch->common[VPIF_VIDEO_INDEX]);
-		spin_lock_init(&common->irqlock);
-		mutex_init(&common->lock);
-		ch->video_dev->lock = &common->lock;
-		/* Initialize prio member of channel object */
-		v4l2_prio_init(&ch->prio);
-		err = video_register_device(ch->video_dev,
-					    VFL_TYPE_GRABBER, (j ? 1 : 0));
-		if (err)
-			goto probe_out;
-
-		video_set_drvdata(ch->video_dev, ch);
-
-	}
-
-	i2c_adap = i2c_get_adapter(1);
-	config = pdev->dev.platform_data;
-
-	subdev_count = config->subdev_count;
-	vpif_obj.sd = kzalloc(sizeof(struct v4l2_subdev *) * subdev_count,
-				GFP_KERNEL);
-	if (vpif_obj.sd == NULL) {
-		vpif_err("unable to allocate memory for subdevice pointers\n");
-		err = -ENOMEM;
-		goto probe_out;
-	}
-
-	for (i = 0; i < subdev_count; i++) {
-		subdevdata = &config->subdev_info[i];
-		vpif_obj.sd[i] =
-			v4l2_i2c_new_subdev_board(&vpif_obj.v4l2_dev,
-						  i2c_adap,
-						  &subdevdata->board_info,
-						  NULL);
-
-		if (!vpif_obj.sd[i]) {
-			vpif_err("Error registering v4l2 subdevice\n");
-			goto probe_subdev_out;
-		}
-		v4l2_info(&vpif_obj.v4l2_dev, "registered sub device %s\n",
-			  subdevdata->name);
-
-		if (vpif_obj.sd[i])
-			vpif_obj.sd[i]->grp_id = 1 << i;
-	}
-
-	v4l2_info(&vpif_obj.v4l2_dev, "VPIF capture driver initialized\n");
-	return 0;
-
-probe_subdev_out:
-	/* free sub devices memory */
-	kfree(vpif_obj.sd);
-
-	j = VPIF_CAPTURE_MAX_DEVICES;
-probe_out:
-	for (k = 0; k < j; k++) {
-		/* Get the pointer to the channel object */
-		ch = vpif_obj.dev[k];
-		/* Unregister video device */
-		video_unregister_device(ch->video_dev);
-	}
-
-vpif_dev_alloc_err:
-	k = VPIF_CAPTURE_MAX_DEVICES-1;
-	res = platform_get_resource(pdev, IORESOURCE_IRQ, k);
-	i = res->end;
-
-vpif_int_err:
-	for (q = k; q >= 0; q--) {
-		for (m = i; m >= (int)res->start; m--)
-			free_irq(m, (void *)(&vpif_obj.dev[q]->channel_id));
-
-		res = platform_get_resource(pdev, IORESOURCE_IRQ, q-1);
-		if (res)
-			i = res->end;
-	}
-	v4l2_device_unregister(&vpif_obj.v4l2_dev);
-	return err;
-}
-
-/**
- * vpif_remove() - driver remove handler
- * @device: ptr to platform device structure
- *
- * The vidoe device is unregistered
- */
-static int vpif_remove(struct platform_device *device)
-{
-	int i;
-	struct channel_obj *ch;
-
-	v4l2_device_unregister(&vpif_obj.v4l2_dev);
-
-	/* un-register device */
-	for (i = 0; i < VPIF_CAPTURE_MAX_DEVICES; i++) {
-		/* Get the pointer to the channel object */
-		ch = vpif_obj.dev[i];
-		/* Unregister video device */
-		video_unregister_device(ch->video_dev);
-	}
-	return 0;
-}
-
-#ifdef CONFIG_PM
-/**
- * vpif_suspend: vpif device suspend
- */
-static int vpif_suspend(struct device *dev)
-{
-
-	struct common_obj *common;
-	struct channel_obj *ch;
-	int i;
-
-	for (i = 0; i < VPIF_CAPTURE_MAX_DEVICES; i++) {
-		/* Get the pointer to the channel object */
-		ch = vpif_obj.dev[i];
-		common = &ch->common[VPIF_VIDEO_INDEX];
-		mutex_lock(&common->lock);
-		if (ch->usrs && common->io_usrs) {
-			/* Disable channel */
-			if (ch->channel_id == VPIF_CHANNEL0_VIDEO) {
-				enable_channel0(0);
-				channel0_intr_enable(0);
-			}
-			if (ch->channel_id == VPIF_CHANNEL1_VIDEO ||
-			    common->started == 2) {
-				enable_channel1(0);
-				channel1_intr_enable(0);
-			}
-		}
-		mutex_unlock(&common->lock);
-	}
-
-	return 0;
-}
-
-/*
- * vpif_resume: vpif device suspend
- */
-static int vpif_resume(struct device *dev)
-{
-	struct common_obj *common;
-	struct channel_obj *ch;
-	int i;
-
-	for (i = 0; i < VPIF_CAPTURE_MAX_DEVICES; i++) {
-		/* Get the pointer to the channel object */
-		ch = vpif_obj.dev[i];
-		common = &ch->common[VPIF_VIDEO_INDEX];
-		mutex_lock(&common->lock);
-		if (ch->usrs && common->io_usrs) {
-			/* Disable channel */
-			if (ch->channel_id == VPIF_CHANNEL0_VIDEO) {
-				enable_channel0(1);
-				channel0_intr_enable(1);
-			}
-			if (ch->channel_id == VPIF_CHANNEL1_VIDEO ||
-			    common->started == 2) {
-				enable_channel1(1);
-				channel1_intr_enable(1);
-			}
-		}
-		mutex_unlock(&common->lock);
-	}
-
-	return 0;
-}
-
-static const struct dev_pm_ops vpif_dev_pm_ops = {
-	.suspend = vpif_suspend,
-	.resume = vpif_resume,
-};
-
-#define vpif_pm_ops (&vpif_dev_pm_ops)
-#else
-#define vpif_pm_ops NULL
-#endif
-
-static __refdata struct platform_driver vpif_driver = {
-	.driver	= {
-		.name	= "vpif_capture",
-		.owner	= THIS_MODULE,
-		.pm	= vpif_pm_ops,
-	},
-	.probe = vpif_probe,
-	.remove = vpif_remove,
-};
-
-/**
- * vpif_init: initialize the vpif driver
- *
- * This function registers device and driver to the kernel, requests irq
- * handler and allocates memory
- * for channel objects
- */
-static __init int vpif_init(void)
-{
-	return platform_driver_register(&vpif_driver);
-}
-
-/**
- * vpif_cleanup : This function clean up the vpif capture resources
- *
- * This will un-registers device and driver to the kernel, frees
- * requested irq handler and de-allocates memory allocated for channel
- * objects.
- */
-static void vpif_cleanup(void)
-{
-	struct platform_device *pdev;
-	struct resource *res;
-	int irq_num;
-	int i = 0;
-
-	pdev = container_of(vpif_dev, struct platform_device, dev);
-	while ((res = platform_get_resource(pdev, IORESOURCE_IRQ, i))) {
-		for (irq_num = res->start; irq_num <= res->end; irq_num++)
-			free_irq(irq_num,
-				 (void *)(&vpif_obj.dev[i]->channel_id));
-		i++;
-	}
-
-	platform_driver_unregister(&vpif_driver);
-
-	kfree(vpif_obj.sd);
-	for (i = 0; i < VPIF_CAPTURE_MAX_DEVICES; i++)
-		kfree(vpif_obj.dev[i]);
-}
-
-/* Function for module initialization and cleanup */
-module_init(vpif_init);
-module_exit(vpif_cleanup);
diff --git a/drivers/media/video/davinci/vpif_capture.h b/drivers/media/video/davinci/vpif_capture.h
deleted file mode 100644
index 3511510f43e..00000000000
--- a/drivers/media/video/davinci/vpif_capture.h
+++ /dev/null
@@ -1,170 +0,0 @@
-/*
- * Copyright (C) 2009 Texas Instruments Inc
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef VPIF_CAPTURE_H
-#define VPIF_CAPTURE_H
-
-#ifdef __KERNEL__
-
-/* Header files */
-#include <linux/videodev2.h>
-#include <media/v4l2-common.h>
-#include <media/v4l2-device.h>
-#include <media/videobuf-core.h>
-#include <media/videobuf2-dma-contig.h>
-#include <media/davinci/vpif_types.h>
-
-#include "vpif.h"
-
-/* Macros */
-#define VPIF_CAPTURE_VERSION		"0.0.2"
-
-#define VPIF_VALID_FIELD(field)		(((V4L2_FIELD_ANY == field) || \
-	(V4L2_FIELD_NONE == field)) || \
-	(((V4L2_FIELD_INTERLACED == field) || \
-	(V4L2_FIELD_SEQ_TB == field)) || \
-	(V4L2_FIELD_SEQ_BT == field)))
-
-#define VPIF_CAPTURE_MAX_DEVICES	2
-#define VPIF_VIDEO_INDEX		0
-#define VPIF_NUMBER_OF_OBJECTS		1
-
-/* Enumerated data type to give id to each device per channel */
-enum vpif_channel_id {
-	VPIF_CHANNEL0_VIDEO = 0,
-	VPIF_CHANNEL1_VIDEO,
-};
-
-struct video_obj {
-	enum v4l2_field buf_field;
-	/* Currently selected or default standard */
-	v4l2_std_id stdid;
-	u32 dv_preset;
-	struct v4l2_bt_timings bt_timings;
-	/* This is to track the last input that is passed to application */
-	u32 input_idx;
-};
-
-struct vpif_cap_buffer {
-	struct vb2_buffer vb;
-	struct list_head list;
-};
-
-struct common_obj {
-	/* Pointer pointing to current v4l2_buffer */
-	struct vpif_cap_buffer *cur_frm;
-	/* Pointer pointing to current v4l2_buffer */
-	struct vpif_cap_buffer *next_frm;
-	/*
-	 * This field keeps track of type of buffer exchange mechanism
-	 * user has selected
-	 */
-	enum v4l2_memory memory;
-	/* Used to store pixel format */
-	struct v4l2_format fmt;
-	/* Buffer queue used in video-buf */
-	struct vb2_queue buffer_queue;
-	/* allocator-specific contexts for each plane */
-	struct vb2_alloc_ctx *alloc_ctx;
-	/* Queue of filled frames */
-	struct list_head dma_queue;
-	/* Used in video-buf */
-	spinlock_t irqlock;
-	/* lock used to access this structure */
-	struct mutex lock;
-	/* number of users performing IO */
-	u32 io_usrs;
-	/* Indicates whether streaming started */
-	u8 started;
-	/* Function pointer to set the addresses */
-	void (*set_addr) (unsigned long, unsigned long, unsigned long,
-			  unsigned long);
-	/* offset where Y top starts from the starting of the buffer */
-	u32 ytop_off;
-	/* offset where Y bottom starts from the starting of the buffer */
-	u32 ybtm_off;
-	/* offset where C top starts from the starting of the buffer */
-	u32 ctop_off;
-	/* offset where C bottom starts from the starting of the buffer */
-	u32 cbtm_off;
-	/* Indicates width of the image data */
-	u32 width;
-	/* Indicates height of the image data */
-	u32 height;
-};
-
-struct channel_obj {
-	/* Identifies video device for this channel */
-	struct video_device *video_dev;
-	/* Used to keep track of state of the priority */
-	struct v4l2_prio_state prio;
-	/* number of open instances of the channel */
-	int usrs;
-	/* Indicates id of the field which is being displayed */
-	u32 field_id;
-	/* flag to indicate whether decoder is initialized */
-	u8 initialized;
-	/* Identifies channel */
-	enum vpif_channel_id channel_id;
-	/* index into sd table */
-	int curr_sd_index;
-	/* ptr to current sub device information */
-	struct vpif_subdev_info *curr_subdev_info;
-	/* vpif configuration params */
-	struct vpif_params vpifparams;
-	/* common object array */
-	struct common_obj common[VPIF_NUMBER_OF_OBJECTS];
-	/* video object */
-	struct video_obj video;
-};
-
-/* File handle structure */
-struct vpif_fh {
-	/* pointer to channel object for opened device */
-	struct channel_obj *channel;
-	/* Indicates whether this file handle is doing IO */
-	u8 io_allowed[VPIF_NUMBER_OF_OBJECTS];
-	/* Used to keep track priority of this instance */
-	enum v4l2_priority prio;
-	/* Used to indicate channel is initialize or not */
-	u8 initialized;
-};
-
-struct vpif_device {
-	struct v4l2_device v4l2_dev;
-	struct channel_obj *dev[VPIF_CAPTURE_NUM_CHANNELS];
-	struct v4l2_subdev **sd;
-};
-
-struct vpif_config_params {
-	u8 min_numbuffers;
-	u8 numbuffers[VPIF_CAPTURE_NUM_CHANNELS];
-	s8 device_type;
-	u32 min_bufsize[VPIF_CAPTURE_NUM_CHANNELS];
-	u32 channel_bufsize[VPIF_CAPTURE_NUM_CHANNELS];
-	u8 default_device[VPIF_CAPTURE_NUM_CHANNELS];
-	u32 video_limit[VPIF_CAPTURE_NUM_CHANNELS];
-	u8 max_device_type;
-};
-/* Struct which keeps track of the line numbers for the sliced vbi service */
-struct vpif_service_line {
-	u16 service_id;
-	u16 service_line[2];
-};
-#endif				/* End of __KERNEL__ */
-#endif				/* VPIF_CAPTURE_H */
diff --git a/drivers/media/video/davinci/vpif_display.c b/drivers/media/video/davinci/vpif_display.c
deleted file mode 100644
index 4a24848c1a6..00000000000
--- a/drivers/media/video/davinci/vpif_display.c
+++ /dev/null
@@ -1,2010 +0,0 @@
-/*
- * vpif-display - VPIF display driver
- * Display driver for TI DaVinci VPIF
- *
- * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed .as is. WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/errno.h>
-#include <linux/fs.h>
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <linux/workqueue.h>
-#include <linux/string.h>
-#include <linux/videodev2.h>
-#include <linux/wait.h>
-#include <linux/time.h>
-#include <linux/i2c.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-
-#include <asm/irq.h>
-#include <asm/page.h>
-
-#include <media/adv7343.h>
-#include <media/v4l2-device.h>
-#include <media/v4l2-ioctl.h>
-#include <media/v4l2-chip-ident.h>
-
-#include "vpif_display.h"
-#include "vpif.h"
-
-MODULE_DESCRIPTION("TI DaVinci VPIF Display driver");
-MODULE_LICENSE("GPL");
-MODULE_VERSION(VPIF_DISPLAY_VERSION);
-
-#define VPIF_V4L2_STD (V4L2_STD_525_60 | V4L2_STD_625_50)
-
-#define vpif_err(fmt, arg...)	v4l2_err(&vpif_obj.v4l2_dev, fmt, ## arg)
-#define vpif_dbg(level, debug, fmt, arg...)	\
-		v4l2_dbg(level, debug, &vpif_obj.v4l2_dev, fmt, ## arg)
-
-static int debug = 1;
-static u32 ch2_numbuffers = 3;
-static u32 ch3_numbuffers = 3;
-static u32 ch2_bufsize = 1920 * 1080 * 2;
-static u32 ch3_bufsize = 720 * 576 * 2;
-
-module_param(debug, int, 0644);
-module_param(ch2_numbuffers, uint, S_IRUGO);
-module_param(ch3_numbuffers, uint, S_IRUGO);
-module_param(ch2_bufsize, uint, S_IRUGO);
-module_param(ch3_bufsize, uint, S_IRUGO);
-
-MODULE_PARM_DESC(debug, "Debug level 0-1");
-MODULE_PARM_DESC(ch2_numbuffers, "Channel2 buffer count (default:3)");
-MODULE_PARM_DESC(ch3_numbuffers, "Channel3 buffer count (default:3)");
-MODULE_PARM_DESC(ch2_bufsize, "Channel2 buffer size (default:1920 x 1080 x 2)");
-MODULE_PARM_DESC(ch3_bufsize, "Channel3 buffer size (default:720 x 576 x 2)");
-
-static struct vpif_config_params config_params = {
-	.min_numbuffers		= 3,
-	.numbuffers[0]		= 3,
-	.numbuffers[1]		= 3,
-	.min_bufsize[0]		= 720 * 480 * 2,
-	.min_bufsize[1]		= 720 * 480 * 2,
-	.channel_bufsize[0]	= 1920 * 1080 * 2,
-	.channel_bufsize[1]	= 720 * 576 * 2,
-};
-
-static struct vpif_device vpif_obj = { {NULL} };
-static struct device *vpif_dev;
-static void vpif_calculate_offsets(struct channel_obj *ch);
-static void vpif_config_addr(struct channel_obj *ch, int muxmode);
-
-/*
- * buffer_prepare: This is the callback function called from vb2_qbuf()
- * function the buffer is prepared and user space virtual address is converted
- * into physical address
- */
-static int vpif_buffer_prepare(struct vb2_buffer *vb)
-{
-	struct vpif_fh *fh = vb2_get_drv_priv(vb->vb2_queue);
-	struct vb2_queue *q = vb->vb2_queue;
-	struct common_obj *common;
-	unsigned long addr;
-
-	common = &fh->channel->common[VPIF_VIDEO_INDEX];
-	if (vb->state != VB2_BUF_STATE_ACTIVE &&
-		vb->state != VB2_BUF_STATE_PREPARED) {
-		vb2_set_plane_payload(vb, 0, common->fmt.fmt.pix.sizeimage);
-		if (vb2_plane_vaddr(vb, 0) &&
-		vb2_get_plane_payload(vb, 0) > vb2_plane_size(vb, 0))
-			goto buf_align_exit;
-
-		addr = vb2_dma_contig_plane_dma_addr(vb, 0);
-		if (q->streaming &&
-			(V4L2_BUF_TYPE_SLICED_VBI_OUTPUT != q->type)) {
-			if (!ISALIGNED(addr + common->ytop_off) ||
-			!ISALIGNED(addr + common->ybtm_off) ||
-			!ISALIGNED(addr + common->ctop_off) ||
-			!ISALIGNED(addr + common->cbtm_off))
-				goto buf_align_exit;
-		}
-	}
-	return 0;
-
-buf_align_exit:
-	vpif_err("buffer offset not aligned to 8 bytes\n");
-	return -EINVAL;
-}
-
-/*
- * vpif_buffer_queue_setup: This function allocates memory for the buffers
- */
-static int vpif_buffer_queue_setup(struct vb2_queue *vq,
-				const struct v4l2_format *fmt,
-				unsigned int *nbuffers, unsigned int *nplanes,
-				unsigned int sizes[], void *alloc_ctxs[])
-{
-	struct vpif_fh *fh = vb2_get_drv_priv(vq);
-	struct channel_obj *ch = fh->channel;
-	struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX];
-	unsigned long size;
-
-	if (V4L2_MEMORY_MMAP == common->memory) {
-		size = config_params.channel_bufsize[ch->channel_id];
-		/*
-		* Checking if the buffer size exceeds the available buffer
-		* ycmux_mode = 0 means 1 channel mode HD and
-		* ycmux_mode = 1 means 2 channels mode SD
-		*/
-		if (ch->vpifparams.std_info.ycmux_mode == 0) {
-			if (config_params.video_limit[ch->channel_id])
-				while (size * *nbuffers >
-					(config_params.video_limit[0]
-						+ config_params.video_limit[1]))
-					(*nbuffers)--;
-		} else {
-			if (config_params.video_limit[ch->channel_id])
-				while (size * *nbuffers >
-				config_params.video_limit[ch->channel_id])
-					(*nbuffers)--;
-		}
-	} else {
-		size = common->fmt.fmt.pix.sizeimage;
-	}
-
-	if (*nbuffers < config_params.min_numbuffers)
-			*nbuffers = config_params.min_numbuffers;
-
-	*nplanes = 1;
-	sizes[0] = size;
-	alloc_ctxs[0] = common->alloc_ctx;
-	return 0;
-}
-
-/*
- * vpif_buffer_queue: This function adds the buffer to DMA queue
- */
-static void vpif_buffer_queue(struct vb2_buffer *vb)
-{
-	struct vpif_fh *fh = vb2_get_drv_priv(vb->vb2_queue);
-	struct vpif_disp_buffer *buf = container_of(vb,
-				struct vpif_disp_buffer, vb);
-	struct channel_obj *ch = fh->channel;
-	struct common_obj *common;
-
-	common = &ch->common[VPIF_VIDEO_INDEX];
-
-	/* add the buffer to the DMA queue */
-	list_add_tail(&buf->list, &common->dma_queue);
-}
-
-/*
- * vpif_buf_cleanup: This function is called from the videobuf2 layer to
- * free memory allocated to the buffers
- */
-static void vpif_buf_cleanup(struct vb2_buffer *vb)
-{
-	struct vpif_fh *fh = vb2_get_drv_priv(vb->vb2_queue);
-	struct vpif_disp_buffer *buf = container_of(vb,
-					struct vpif_disp_buffer, vb);
-	struct channel_obj *ch = fh->channel;
-	struct common_obj *common;
-	unsigned long flags;
-
-	common = &ch->common[VPIF_VIDEO_INDEX];
-
-	spin_lock_irqsave(&common->irqlock, flags);
-	if (vb->state == VB2_BUF_STATE_ACTIVE)
-		list_del_init(&buf->list);
-	spin_unlock_irqrestore(&common->irqlock, flags);
-}
-
-static void vpif_wait_prepare(struct vb2_queue *vq)
-{
-	struct vpif_fh *fh = vb2_get_drv_priv(vq);
-	struct channel_obj *ch = fh->channel;
-	struct common_obj *common;
-
-	common = &ch->common[VPIF_VIDEO_INDEX];
-	mutex_unlock(&common->lock);
-}
-
-static void vpif_wait_finish(struct vb2_queue *vq)
-{
-	struct vpif_fh *fh = vb2_get_drv_priv(vq);
-	struct channel_obj *ch = fh->channel;
-	struct common_obj *common;
-
-	common = &ch->common[VPIF_VIDEO_INDEX];
-	mutex_lock(&common->lock);
-}
-
-static int vpif_buffer_init(struct vb2_buffer *vb)
-{
-	struct vpif_disp_buffer *buf = container_of(vb,
-					struct vpif_disp_buffer, vb);
-
-	INIT_LIST_HEAD(&buf->list);
-
-	return 0;
-}
-
-static u8 channel_first_int[VPIF_NUMOBJECTS][2] = { {1, 1} };
-
-static int vpif_start_streaming(struct vb2_queue *vq, unsigned int count)
-{
-	struct vpif_display_config *vpif_config_data =
-					vpif_dev->platform_data;
-	struct vpif_fh *fh = vb2_get_drv_priv(vq);
-	struct channel_obj *ch = fh->channel;
-	struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX];
-	struct vpif_params *vpif = &ch->vpifparams;
-	unsigned long addr = 0;
-	int ret;
-
-	/* If buffer queue is empty, return error */
-	if (list_empty(&common->dma_queue)) {
-		vpif_err("buffer queue is empty\n");
-		return -EIO;
-	}
-
-	/* Get the next frame from the buffer queue */
-	common->next_frm = common->cur_frm =
-			    list_entry(common->dma_queue.next,
-				       struct vpif_disp_buffer, list);
-
-	list_del(&common->cur_frm->list);
-	/* Mark state of the current frame to active */
-	common->cur_frm->vb.state = VB2_BUF_STATE_ACTIVE;
-
-	/* Initialize field_id and started member */
-	ch->field_id = 0;
-	common->started = 1;
-	addr = vb2_dma_contig_plane_dma_addr(&common->cur_frm->vb, 0);
-	/* Calculate the offset for Y and C data  in the buffer */
-	vpif_calculate_offsets(ch);
-
-	if ((ch->vpifparams.std_info.frm_fmt &&
-		((common->fmt.fmt.pix.field != V4L2_FIELD_NONE)
-		&& (common->fmt.fmt.pix.field != V4L2_FIELD_ANY)))
-		|| (!ch->vpifparams.std_info.frm_fmt
-		&& (common->fmt.fmt.pix.field == V4L2_FIELD_NONE))) {
-		vpif_err("conflict in field format and std format\n");
-		return -EINVAL;
-	}
-
-	/* clock settings */
-	ret =
-	    vpif_config_data->set_clock(ch->vpifparams.std_info.ycmux_mode,
-					ch->vpifparams.std_info.hd_sd);
-	if (ret < 0) {
-		vpif_err("can't set clock\n");
-		return ret;
-	}
-
-	/* set the parameters and addresses */
-	ret = vpif_set_video_params(vpif, ch->channel_id + 2);
-	if (ret < 0)
-		return ret;
-
-	common->started = ret;
-	vpif_config_addr(ch, ret);
-	common->set_addr((addr + common->ytop_off),
-			    (addr + common->ybtm_off),
-			    (addr + common->ctop_off),
-			    (addr + common->cbtm_off));
-
-	/* Set interrupt for both the fields in VPIF
-	    Register enable channel in VPIF register */
-	if (VPIF_CHANNEL2_VIDEO == ch->channel_id) {
-		channel2_intr_assert();
-		channel2_intr_enable(1);
-		enable_channel2(1);
-		if (vpif_config_data->ch2_clip_en)
-			channel2_clipping_enable(1);
-	}
-
-	if ((VPIF_CHANNEL3_VIDEO == ch->channel_id)
-		|| (common->started == 2)) {
-		channel3_intr_assert();
-		channel3_intr_enable(1);
-		enable_channel3(1);
-		if (vpif_config_data->ch3_clip_en)
-			channel3_clipping_enable(1);
-	}
-	channel_first_int[VPIF_VIDEO_INDEX][ch->channel_id] = 1;
-
-	return 0;
-}
-
-/* abort streaming and wait for last buffer */
-static int vpif_stop_streaming(struct vb2_queue *vq)
-{
-	struct vpif_fh *fh = vb2_get_drv_priv(vq);
-	struct channel_obj *ch = fh->channel;
-	struct common_obj *common;
-
-	if (!vb2_is_streaming(vq))
-		return 0;
-
-	common = &ch->common[VPIF_VIDEO_INDEX];
-
-	/* release all active buffers */
-	while (!list_empty(&common->dma_queue)) {
-		common->next_frm = list_entry(common->dma_queue.next,
-						struct vpif_disp_buffer, list);
-		list_del(&common->next_frm->list);
-		vb2_buffer_done(&common->next_frm->vb, VB2_BUF_STATE_ERROR);
-	}
-
-	return 0;
-}
-
-static struct vb2_ops video_qops = {
-	.queue_setup		= vpif_buffer_queue_setup,
-	.wait_prepare		= vpif_wait_prepare,
-	.wait_finish		= vpif_wait_finish,
-	.buf_init		= vpif_buffer_init,
-	.buf_prepare		= vpif_buffer_prepare,
-	.start_streaming	= vpif_start_streaming,
-	.stop_streaming		= vpif_stop_streaming,
-	.buf_cleanup		= vpif_buf_cleanup,
-	.buf_queue		= vpif_buffer_queue,
-};
-
-static void process_progressive_mode(struct common_obj *common)
-{
-	unsigned long addr = 0;
-
-	/* Get the next buffer from buffer queue */
-	common->next_frm = list_entry(common->dma_queue.next,
-				struct vpif_disp_buffer, list);
-	/* Remove that buffer from the buffer queue */
-	list_del(&common->next_frm->list);
-	/* Mark status of the buffer as active */
-	common->next_frm->vb.state = VB2_BUF_STATE_ACTIVE;
-
-	/* Set top and bottom field addrs in VPIF registers */
-	addr = vb2_dma_contig_plane_dma_addr(&common->next_frm->vb, 0);
-	common->set_addr(addr + common->ytop_off,
-				 addr + common->ybtm_off,
-				 addr + common->ctop_off,
-				 addr + common->cbtm_off);
-}
-
-static void process_interlaced_mode(int fid, struct common_obj *common)
-{
-	/* device field id and local field id are in sync */
-	/* If this is even field */
-	if (0 == fid) {
-		if (common->cur_frm == common->next_frm)
-			return;
-
-		/* one frame is displayed If next frame is
-		 *  available, release cur_frm and move on */
-		/* Copy frame display time */
-		do_gettimeofday(&common->cur_frm->vb.v4l2_buf.timestamp);
-		/* Change status of the cur_frm */
-		vb2_buffer_done(&common->cur_frm->vb,
-					    VB2_BUF_STATE_DONE);
-		/* Make cur_frm pointing to next_frm */
-		common->cur_frm = common->next_frm;
-
-	} else if (1 == fid) {	/* odd field */
-		if (list_empty(&common->dma_queue)
-		    || (common->cur_frm != common->next_frm)) {
-			return;
-		}
-		/* one field is displayed configure the next
-		 * frame if it is available else hold on current
-		 * frame */
-		/* Get next from the buffer queue */
-		process_progressive_mode(common);
-
-	}
-}
-
-/*
- * vpif_channel_isr: It changes status of the displayed buffer, takes next
- * buffer from the queue and sets its address in VPIF registers
- */
-static irqreturn_t vpif_channel_isr(int irq, void *dev_id)
-{
-	struct vpif_device *dev = &vpif_obj;
-	struct channel_obj *ch;
-	struct common_obj *common;
-	enum v4l2_field field;
-	int fid = -1, i;
-	int channel_id = 0;
-
-	channel_id = *(int *)(dev_id);
-	if (!vpif_intr_status(channel_id + 2))
-		return IRQ_NONE;
-
-	ch = dev->dev[channel_id];
-	field = ch->common[VPIF_VIDEO_INDEX].fmt.fmt.pix.field;
-	for (i = 0; i < VPIF_NUMOBJECTS; i++) {
-		common = &ch->common[i];
-		/* If streaming is started in this channel */
-		if (0 == common->started)
-			continue;
-
-		if (1 == ch->vpifparams.std_info.frm_fmt) {
-			if (list_empty(&common->dma_queue))
-				continue;
-
-			/* Progressive mode */
-			if (!channel_first_int[i][channel_id]) {
-				/* Mark status of the cur_frm to
-				 * done and unlock semaphore on it */
-				do_gettimeofday(&common->cur_frm->vb.
-						v4l2_buf.timestamp);
-				vb2_buffer_done(&common->cur_frm->vb,
-					    VB2_BUF_STATE_DONE);
-				/* Make cur_frm pointing to next_frm */
-				common->cur_frm = common->next_frm;
-			}
-
-			channel_first_int[i][channel_id] = 0;
-			process_progressive_mode(common);
-		} else {
-			/* Interlaced mode */
-			/* If it is first interrupt, ignore it */
-
-			if (channel_first_int[i][channel_id]) {
-				channel_first_int[i][channel_id] = 0;
-				continue;
-			}
-
-			if (0 == i) {
-				ch->field_id ^= 1;
-				/* Get field id from VPIF registers */
-				fid = vpif_channel_getfid(ch->channel_id + 2);
-				/* If fid does not match with stored field id */
-				if (fid != ch->field_id) {
-					/* Make them in sync */
-					if (0 == fid)
-						ch->field_id = fid;
-
-					return IRQ_HANDLED;
-				}
-			}
-			process_interlaced_mode(fid, common);
-		}
-	}
-
-	return IRQ_HANDLED;
-}
-
-static int vpif_update_std_info(struct channel_obj *ch)
-{
-	struct video_obj *vid_ch = &ch->video;
-	struct vpif_params *vpifparams = &ch->vpifparams;
-	struct vpif_channel_config_params *std_info = &vpifparams->std_info;
-	const struct vpif_channel_config_params *config;
-
-	int i;
-
-	for (i = 0; i < vpif_ch_params_count; i++) {
-		config = &ch_params[i];
-		if (config->hd_sd == 0) {
-			vpif_dbg(2, debug, "SD format\n");
-			if (config->stdid & vid_ch->stdid) {
-				memcpy(std_info, config, sizeof(*config));
-				break;
-			}
-		} else {
-			vpif_dbg(2, debug, "HD format\n");
-			if (config->dv_preset == vid_ch->dv_preset) {
-				memcpy(std_info, config, sizeof(*config));
-				break;
-			}
-		}
-	}
-
-	if (i == vpif_ch_params_count) {
-		vpif_dbg(1, debug, "Format not found\n");
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static int vpif_update_resolution(struct channel_obj *ch)
-{
-	struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX];
-	struct video_obj *vid_ch = &ch->video;
-	struct vpif_params *vpifparams = &ch->vpifparams;
-	struct vpif_channel_config_params *std_info = &vpifparams->std_info;
-
-	if (!vid_ch->stdid && !vid_ch->dv_preset && !vid_ch->bt_timings.height)
-		return -EINVAL;
-
-	if (vid_ch->stdid || vid_ch->dv_preset) {
-		if (vpif_update_std_info(ch))
-			return -EINVAL;
-	}
-
-	common->fmt.fmt.pix.width = std_info->width;
-	common->fmt.fmt.pix.height = std_info->height;
-	vpif_dbg(1, debug, "Pixel details: Width = %d,Height = %d\n",
-			common->fmt.fmt.pix.width, common->fmt.fmt.pix.height);
-
-	/* Set height and width paramateres */
-	common->height = std_info->height;
-	common->width = std_info->width;
-
-	return 0;
-}
-
-/*
- * vpif_calculate_offsets: This function calculates buffers offset for Y and C
- * in the top and bottom field
- */
-static void vpif_calculate_offsets(struct channel_obj *ch)
-{
-	struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX];
-	struct vpif_params *vpifparams = &ch->vpifparams;
-	enum v4l2_field field = common->fmt.fmt.pix.field;
-	struct video_obj *vid_ch = &ch->video;
-	unsigned int hpitch, vpitch, sizeimage;
-
-	if (V4L2_FIELD_ANY == common->fmt.fmt.pix.field) {
-		if (ch->vpifparams.std_info.frm_fmt)
-			vid_ch->buf_field = V4L2_FIELD_NONE;
-		else
-			vid_ch->buf_field = V4L2_FIELD_INTERLACED;
-	} else {
-		vid_ch->buf_field = common->fmt.fmt.pix.field;
-	}
-
-	sizeimage = common->fmt.fmt.pix.sizeimage;
-
-	hpitch = common->fmt.fmt.pix.bytesperline;
-	vpitch = sizeimage / (hpitch * 2);
-	if ((V4L2_FIELD_NONE == vid_ch->buf_field) ||
-	    (V4L2_FIELD_INTERLACED == vid_ch->buf_field)) {
-		common->ytop_off = 0;
-		common->ybtm_off = hpitch;
-		common->ctop_off = sizeimage / 2;
-		common->cbtm_off = sizeimage / 2 + hpitch;
-	} else if (V4L2_FIELD_SEQ_TB == vid_ch->buf_field) {
-		common->ytop_off = 0;
-		common->ybtm_off = sizeimage / 4;
-		common->ctop_off = sizeimage / 2;
-		common->cbtm_off = common->ctop_off + sizeimage / 4;
-	} else if (V4L2_FIELD_SEQ_BT == vid_ch->buf_field) {
-		common->ybtm_off = 0;
-		common->ytop_off = sizeimage / 4;
-		common->cbtm_off = sizeimage / 2;
-		common->ctop_off = common->cbtm_off + sizeimage / 4;
-	}
-
-	if ((V4L2_FIELD_NONE == vid_ch->buf_field) ||
-	    (V4L2_FIELD_INTERLACED == vid_ch->buf_field)) {
-		vpifparams->video_params.storage_mode = 1;
-	} else {
-		vpifparams->video_params.storage_mode = 0;
-	}
-
-	if (ch->vpifparams.std_info.frm_fmt == 1) {
-		vpifparams->video_params.hpitch =
-		    common->fmt.fmt.pix.bytesperline;
-	} else {
-		if ((field == V4L2_FIELD_ANY) ||
-			(field == V4L2_FIELD_INTERLACED))
-			vpifparams->video_params.hpitch =
-			    common->fmt.fmt.pix.bytesperline * 2;
-		else
-			vpifparams->video_params.hpitch =
-			    common->fmt.fmt.pix.bytesperline;
-	}
-
-	ch->vpifparams.video_params.stdid = ch->vpifparams.std_info.stdid;
-}
-
-static void vpif_config_format(struct channel_obj *ch)
-{
-	struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX];
-
-	common->fmt.fmt.pix.field = V4L2_FIELD_ANY;
-	if (config_params.numbuffers[ch->channel_id] == 0)
-		common->memory = V4L2_MEMORY_USERPTR;
-	else
-		common->memory = V4L2_MEMORY_MMAP;
-
-	common->fmt.fmt.pix.sizeimage =
-			config_params.channel_bufsize[ch->channel_id];
-	common->fmt.fmt.pix.pixelformat = V4L2_PIX_FMT_YUV422P;
-	common->fmt.type = V4L2_BUF_TYPE_VIDEO_OUTPUT;
-}
-
-static int vpif_check_format(struct channel_obj *ch,
-			     struct v4l2_pix_format *pixfmt)
-{
-	struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX];
-	enum v4l2_field field = pixfmt->field;
-	u32 sizeimage, hpitch, vpitch;
-
-	if (pixfmt->pixelformat != V4L2_PIX_FMT_YUV422P)
-		goto invalid_fmt_exit;
-
-	if (!(VPIF_VALID_FIELD(field)))
-		goto invalid_fmt_exit;
-
-	if (pixfmt->bytesperline <= 0)
-		goto invalid_pitch_exit;
-
-	sizeimage = pixfmt->sizeimage;
-
-	if (vpif_update_resolution(ch))
-		return -EINVAL;
-
-	hpitch = pixfmt->bytesperline;
-	vpitch = sizeimage / (hpitch * 2);
-
-	/* Check for valid value of pitch */
-	if ((hpitch < ch->vpifparams.std_info.width) ||
-	    (vpitch < ch->vpifparams.std_info.height))
-		goto invalid_pitch_exit;
-
-	/* Check for 8 byte alignment */
-	if (!ISALIGNED(hpitch)) {
-		vpif_err("invalid pitch alignment\n");
-		return -EINVAL;
-	}
-	pixfmt->width = common->fmt.fmt.pix.width;
-	pixfmt->height = common->fmt.fmt.pix.height;
-
-	return 0;
-
-invalid_fmt_exit:
-	vpif_err("invalid field format\n");
-	return -EINVAL;
-
-invalid_pitch_exit:
-	vpif_err("invalid pitch\n");
-	return -EINVAL;
-}
-
-static void vpif_config_addr(struct channel_obj *ch, int muxmode)
-{
-	struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX];
-
-	if (VPIF_CHANNEL3_VIDEO == ch->channel_id) {
-		common->set_addr = ch3_set_videobuf_addr;
-	} else {
-		if (2 == muxmode)
-			common->set_addr = ch2_set_videobuf_addr_yc_nmux;
-		else
-			common->set_addr = ch2_set_videobuf_addr;
-	}
-}
-
-/*
- * vpif_mmap: It is used to map kernel space buffers into user spaces
- */
-static int vpif_mmap(struct file *filep, struct vm_area_struct *vma)
-{
-	struct vpif_fh *fh = filep->private_data;
-	struct channel_obj *ch = fh->channel;
-	struct common_obj *common = &(ch->common[VPIF_VIDEO_INDEX]);
-	int ret;
-
-	vpif_dbg(2, debug, "vpif_mmap\n");
-
-	if (mutex_lock_interruptible(&common->lock))
-		return -ERESTARTSYS;
-	ret = vb2_mmap(&common->buffer_queue, vma);
-	mutex_unlock(&common->lock);
-	return ret;
-}
-
-/*
- * vpif_poll: It is used for select/poll system call
- */
-static unsigned int vpif_poll(struct file *filep, poll_table *wait)
-{
-	struct vpif_fh *fh = filep->private_data;
-	struct channel_obj *ch = fh->channel;
-	struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX];
-	unsigned int res = 0;
-
-	if (common->started) {
-		mutex_lock(&common->lock);
-		res = vb2_poll(&common->buffer_queue, filep, wait);
-		mutex_unlock(&common->lock);
-	}
-
-	return res;
-}
-
-/*
- * vpif_open: It creates object of file handle structure and stores it in
- * private_data member of filepointer
- */
-static int vpif_open(struct file *filep)
-{
-	struct video_device *vdev = video_devdata(filep);
-	struct channel_obj *ch = video_get_drvdata(vdev);
-	struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX];
-	struct vpif_fh *fh;
-
-	/* Allocate memory for the file handle object */
-	fh = kzalloc(sizeof(struct vpif_fh), GFP_KERNEL);
-	if (fh == NULL) {
-		vpif_err("unable to allocate memory for file handle object\n");
-		return -ENOMEM;
-	}
-
-	if (mutex_lock_interruptible(&common->lock)) {
-		kfree(fh);
-		return -ERESTARTSYS;
-	}
-	/* store pointer to fh in private_data member of filep */
-	filep->private_data = fh;
-	fh->channel = ch;
-	fh->initialized = 0;
-	if (!ch->initialized) {
-		fh->initialized = 1;
-		ch->initialized = 1;
-		memset(&ch->vpifparams, 0, sizeof(ch->vpifparams));
-	}
-
-	/* Increment channel usrs counter */
-	atomic_inc(&ch->usrs);
-	/* Set io_allowed[VPIF_VIDEO_INDEX] member to false */
-	fh->io_allowed[VPIF_VIDEO_INDEX] = 0;
-	/* Initialize priority of this instance to default priority */
-	fh->prio = V4L2_PRIORITY_UNSET;
-	v4l2_prio_open(&ch->prio, &fh->prio);
-	mutex_unlock(&common->lock);
-
-	return 0;
-}
-
-/*
- * vpif_release: This function deletes buffer queue, frees the buffers and
- * the vpif file handle
- */
-static int vpif_release(struct file *filep)
-{
-	struct vpif_fh *fh = filep->private_data;
-	struct channel_obj *ch = fh->channel;
-	struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX];
-
-	mutex_lock(&common->lock);
-	/* if this instance is doing IO */
-	if (fh->io_allowed[VPIF_VIDEO_INDEX]) {
-		/* Reset io_usrs member of channel object */
-		common->io_usrs = 0;
-		/* Disable channel */
-		if (VPIF_CHANNEL2_VIDEO == ch->channel_id) {
-			enable_channel2(0);
-			channel2_intr_enable(0);
-		}
-		if ((VPIF_CHANNEL3_VIDEO == ch->channel_id) ||
-		    (2 == common->started)) {
-			enable_channel3(0);
-			channel3_intr_enable(0);
-		}
-		common->started = 0;
-
-		/* Free buffers allocated */
-		vb2_queue_release(&common->buffer_queue);
-		vb2_dma_contig_cleanup_ctx(common->alloc_ctx);
-
-		common->numbuffers =
-		    config_params.numbuffers[ch->channel_id];
-	}
-
-	/* Decrement channel usrs counter */
-	atomic_dec(&ch->usrs);
-	/* If this file handle has initialize encoder device, reset it */
-	if (fh->initialized)
-		ch->initialized = 0;
-
-	/* Close the priority */
-	v4l2_prio_close(&ch->prio, fh->prio);
-	filep->private_data = NULL;
-	fh->initialized = 0;
-	mutex_unlock(&common->lock);
-	kfree(fh);
-
-	return 0;
-}
-
-/* functions implementing ioctls */
-/**
- * vpif_querycap() - QUERYCAP handler
- * @file: file ptr
- * @priv: file handle
- * @cap: ptr to v4l2_capability structure
- */
-static int vpif_querycap(struct file *file, void  *priv,
-				struct v4l2_capability *cap)
-{
-	struct vpif_display_config *config = vpif_dev->platform_data;
-
-	cap->capabilities = V4L2_CAP_VIDEO_OUTPUT | V4L2_CAP_STREAMING;
-	strlcpy(cap->driver, "vpif display", sizeof(cap->driver));
-	strlcpy(cap->bus_info, "Platform", sizeof(cap->bus_info));
-	strlcpy(cap->card, config->card_name, sizeof(cap->card));
-
-	return 0;
-}
-
-static int vpif_enum_fmt_vid_out(struct file *file, void  *priv,
-					struct v4l2_fmtdesc *fmt)
-{
-	if (fmt->index != 0) {
-		vpif_err("Invalid format index\n");
-		return -EINVAL;
-	}
-
-	/* Fill in the information about format */
-	fmt->type = V4L2_BUF_TYPE_VIDEO_OUTPUT;
-	strcpy(fmt->description, "YCbCr4:2:2 YC Planar");
-	fmt->pixelformat = V4L2_PIX_FMT_YUV422P;
-
-	return 0;
-}
-
-static int vpif_g_fmt_vid_out(struct file *file, void *priv,
-				struct v4l2_format *fmt)
-{
-	struct vpif_fh *fh = priv;
-	struct channel_obj *ch = fh->channel;
-	struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX];
-
-	/* Check the validity of the buffer type */
-	if (common->fmt.type != fmt->type)
-		return -EINVAL;
-
-	if (vpif_update_resolution(ch))
-		return -EINVAL;
-	*fmt = common->fmt;
-	return 0;
-}
-
-static int vpif_s_fmt_vid_out(struct file *file, void *priv,
-				struct v4l2_format *fmt)
-{
-	struct vpif_fh *fh = priv;
-	struct v4l2_pix_format *pixfmt;
-	struct channel_obj *ch = fh->channel;
-	struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX];
-	int ret = 0;
-
-	if ((VPIF_CHANNEL2_VIDEO == ch->channel_id)
-	    || (VPIF_CHANNEL3_VIDEO == ch->channel_id)) {
-		if (!fh->initialized) {
-			vpif_dbg(1, debug, "Channel Busy\n");
-			return -EBUSY;
-		}
-
-		/* Check for the priority */
-		ret = v4l2_prio_check(&ch->prio, fh->prio);
-		if (0 != ret)
-			return ret;
-		fh->initialized = 1;
-	}
-
-	if (common->started) {
-		vpif_dbg(1, debug, "Streaming in progress\n");
-		return -EBUSY;
-	}
-
-	pixfmt = &fmt->fmt.pix;
-	/* Check for valid field format */
-	ret = vpif_check_format(ch, pixfmt);
-	if (ret)
-		return ret;
-
-	/* store the pix format in the channel object */
-	common->fmt.fmt.pix = *pixfmt;
-	/* store the format in the channel object */
-	common->fmt = *fmt;
-	return 0;
-}
-
-static int vpif_try_fmt_vid_out(struct file *file, void *priv,
-				struct v4l2_format *fmt)
-{
-	struct vpif_fh *fh = priv;
-	struct channel_obj *ch = fh->channel;
-	struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX];
-	struct v4l2_pix_format *pixfmt = &fmt->fmt.pix;
-	int ret = 0;
-
-	ret = vpif_check_format(ch, pixfmt);
-	if (ret) {
-		*pixfmt = common->fmt.fmt.pix;
-		pixfmt->sizeimage = pixfmt->width * pixfmt->height * 2;
-	}
-
-	return ret;
-}
-
-static int vpif_reqbufs(struct file *file, void *priv,
-			struct v4l2_requestbuffers *reqbuf)
-{
-	struct vpif_fh *fh = priv;
-	struct channel_obj *ch = fh->channel;
-	struct common_obj *common;
-	enum v4l2_field field;
-	struct vb2_queue *q;
-	u8 index = 0;
-
-	/* This file handle has not initialized the channel,
-	   It is not allowed to do settings */
-	if ((VPIF_CHANNEL2_VIDEO == ch->channel_id)
-	    || (VPIF_CHANNEL3_VIDEO == ch->channel_id)) {
-		if (!fh->initialized) {
-			vpif_err("Channel Busy\n");
-			return -EBUSY;
-		}
-	}
-
-	if (V4L2_BUF_TYPE_VIDEO_OUTPUT != reqbuf->type)
-		return -EINVAL;
-
-	index = VPIF_VIDEO_INDEX;
-
-	common = &ch->common[index];
-
-	if (common->fmt.type != reqbuf->type || !vpif_dev)
-		return -EINVAL;
-	if (0 != common->io_usrs)
-		return -EBUSY;
-
-	if (reqbuf->type == V4L2_BUF_TYPE_VIDEO_OUTPUT) {
-		if (common->fmt.fmt.pix.field == V4L2_FIELD_ANY)
-			field = V4L2_FIELD_INTERLACED;
-		else
-			field = common->fmt.fmt.pix.field;
-	} else {
-		field = V4L2_VBI_INTERLACED;
-	}
-	/* Initialize videobuf2 queue as per the buffer type */
-	common->alloc_ctx = vb2_dma_contig_init_ctx(vpif_dev);
-	if (!common->alloc_ctx) {
-		vpif_err("Failed to get the context\n");
-		return -EINVAL;
-	}
-	q = &common->buffer_queue;
-	q->type = V4L2_BUF_TYPE_VIDEO_OUTPUT;
-	q->io_modes = VB2_MMAP | VB2_USERPTR;
-	q->drv_priv = fh;
-	q->ops = &video_qops;
-	q->mem_ops = &vb2_dma_contig_memops;
-	q->buf_struct_size = sizeof(struct vpif_disp_buffer);
-
-	vb2_queue_init(q);
-
-	/* Set io allowed member of file handle to TRUE */
-	fh->io_allowed[index] = 1;
-	/* Increment io usrs member of channel object to 1 */
-	common->io_usrs = 1;
-	/* Store type of memory requested in channel object */
-	common->memory = reqbuf->memory;
-	INIT_LIST_HEAD(&common->dma_queue);
-	/* Allocate buffers */
-	return vb2_reqbufs(&common->buffer_queue, reqbuf);
-}
-
-static int vpif_querybuf(struct file *file, void *priv,
-				struct v4l2_buffer *tbuf)
-{
-	struct vpif_fh *fh = priv;
-	struct channel_obj *ch = fh->channel;
-	struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX];
-
-	if (common->fmt.type != tbuf->type)
-		return -EINVAL;
-
-	return vb2_querybuf(&common->buffer_queue, tbuf);
-}
-
-static int vpif_qbuf(struct file *file, void *priv, struct v4l2_buffer *buf)
-{
-	struct vpif_fh *fh = NULL;
-	struct channel_obj *ch = NULL;
-	struct common_obj *common = NULL;
-
-	if (!buf || !priv)
-		return -EINVAL;
-
-	fh = priv;
-	ch = fh->channel;
-	if (!ch)
-		return -EINVAL;
-
-	common = &(ch->common[VPIF_VIDEO_INDEX]);
-	if (common->fmt.type != buf->type)
-		return -EINVAL;
-
-	if (!fh->io_allowed[VPIF_VIDEO_INDEX]) {
-		vpif_err("fh->io_allowed\n");
-		return -EACCES;
-	}
-
-	return vb2_qbuf(&common->buffer_queue, buf);
-}
-
-static int vpif_s_std(struct file *file, void *priv, v4l2_std_id *std_id)
-{
-	struct vpif_fh *fh = priv;
-	struct channel_obj *ch = fh->channel;
-	struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX];
-	int ret = 0;
-
-	if (!(*std_id & VPIF_V4L2_STD))
-		return -EINVAL;
-
-	if (common->started) {
-		vpif_err("streaming in progress\n");
-		return -EBUSY;
-	}
-
-	/* Call encoder subdevice function to set the standard */
-	ch->video.stdid = *std_id;
-	ch->video.dv_preset = V4L2_DV_INVALID;
-	memset(&ch->video.bt_timings, 0, sizeof(ch->video.bt_timings));
-
-	/* Get the information about the standard */
-	if (vpif_update_resolution(ch))
-		return -EINVAL;
-
-	if ((ch->vpifparams.std_info.width *
-		ch->vpifparams.std_info.height * 2) >
-		config_params.channel_bufsize[ch->channel_id]) {
-		vpif_err("invalid std for this size\n");
-		return -EINVAL;
-	}
-
-	common->fmt.fmt.pix.bytesperline = common->fmt.fmt.pix.width;
-	/* Configure the default format information */
-	vpif_config_format(ch);
-
-	ret = v4l2_device_call_until_err(&vpif_obj.v4l2_dev, 1, video,
-						s_std_output, *std_id);
-	if (ret < 0) {
-		vpif_err("Failed to set output standard\n");
-		return ret;
-	}
-
-	ret = v4l2_device_call_until_err(&vpif_obj.v4l2_dev, 1, core,
-							s_std, *std_id);
-	if (ret < 0)
-		vpif_err("Failed to set standard for sub devices\n");
-	return ret;
-}
-
-static int vpif_g_std(struct file *file, void *priv, v4l2_std_id *std)
-{
-	struct vpif_fh *fh = priv;
-	struct channel_obj *ch = fh->channel;
-
-	*std = ch->video.stdid;
-	return 0;
-}
-
-static int vpif_dqbuf(struct file *file, void *priv, struct v4l2_buffer *p)
-{
-	struct vpif_fh *fh = priv;
-	struct channel_obj *ch = fh->channel;
-	struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX];
-
-	return vb2_dqbuf(&common->buffer_queue, p,
-					(file->f_flags & O_NONBLOCK));
-}
-
-static int vpif_streamon(struct file *file, void *priv,
-				enum v4l2_buf_type buftype)
-{
-	struct vpif_fh *fh = priv;
-	struct channel_obj *ch = fh->channel;
-	struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX];
-	struct channel_obj *oth_ch = vpif_obj.dev[!ch->channel_id];
-	int ret = 0;
-
-	if (buftype != V4L2_BUF_TYPE_VIDEO_OUTPUT) {
-		vpif_err("buffer type not supported\n");
-		return -EINVAL;
-	}
-
-	if (!fh->io_allowed[VPIF_VIDEO_INDEX]) {
-		vpif_err("fh->io_allowed\n");
-		return -EACCES;
-	}
-
-	/* If Streaming is already started, return error */
-	if (common->started) {
-		vpif_err("channel->started\n");
-		return -EBUSY;
-	}
-
-	if ((ch->channel_id == VPIF_CHANNEL2_VIDEO
-		&& oth_ch->common[VPIF_VIDEO_INDEX].started &&
-		ch->vpifparams.std_info.ycmux_mode == 0)
-		|| ((ch->channel_id == VPIF_CHANNEL3_VIDEO)
-		&& (2 == oth_ch->common[VPIF_VIDEO_INDEX].started))) {
-		vpif_err("other channel is using\n");
-		return -EBUSY;
-	}
-
-	ret = vpif_check_format(ch, &common->fmt.fmt.pix);
-	if (ret < 0)
-		return ret;
-
-	/* Call vb2_streamon to start streaming in videobuf2 */
-	ret = vb2_streamon(&common->buffer_queue, buftype);
-	if (ret < 0) {
-		vpif_err("vb2_streamon\n");
-		return ret;
-	}
-
-	return ret;
-}
-
-static int vpif_streamoff(struct file *file, void *priv,
-				enum v4l2_buf_type buftype)
-{
-	struct vpif_fh *fh = priv;
-	struct channel_obj *ch = fh->channel;
-	struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX];
-	struct vpif_display_config *vpif_config_data =
-					vpif_dev->platform_data;
-
-	if (buftype != V4L2_BUF_TYPE_VIDEO_OUTPUT) {
-		vpif_err("buffer type not supported\n");
-		return -EINVAL;
-	}
-
-	if (!fh->io_allowed[VPIF_VIDEO_INDEX]) {
-		vpif_err("fh->io_allowed\n");
-		return -EACCES;
-	}
-
-	if (!common->started) {
-		vpif_err("channel->started\n");
-		return -EINVAL;
-	}
-
-	if (buftype == V4L2_BUF_TYPE_VIDEO_OUTPUT) {
-		/* disable channel */
-		if (VPIF_CHANNEL2_VIDEO == ch->channel_id) {
-			if (vpif_config_data->ch2_clip_en)
-				channel2_clipping_enable(0);
-			enable_channel2(0);
-			channel2_intr_enable(0);
-		}
-		if ((VPIF_CHANNEL3_VIDEO == ch->channel_id) ||
-					(2 == common->started)) {
-			if (vpif_config_data->ch3_clip_en)
-				channel3_clipping_enable(0);
-			enable_channel3(0);
-			channel3_intr_enable(0);
-		}
-	}
-
-	common->started = 0;
-	return vb2_streamoff(&common->buffer_queue, buftype);
-}
-
-static int vpif_cropcap(struct file *file, void *priv,
-			struct v4l2_cropcap *crop)
-{
-	struct vpif_fh *fh = priv;
-	struct channel_obj *ch = fh->channel;
-	struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX];
-	if (V4L2_BUF_TYPE_VIDEO_OUTPUT != crop->type)
-		return -EINVAL;
-
-	crop->bounds.left = crop->bounds.top = 0;
-	crop->defrect.left = crop->defrect.top = 0;
-	crop->defrect.height = crop->bounds.height = common->height;
-	crop->defrect.width = crop->bounds.width = common->width;
-
-	return 0;
-}
-
-static int vpif_enum_output(struct file *file, void *fh,
-				struct v4l2_output *output)
-{
-
-	struct vpif_display_config *config = vpif_dev->platform_data;
-
-	if (output->index >= config->output_count) {
-		vpif_dbg(1, debug, "Invalid output index\n");
-		return -EINVAL;
-	}
-
-	strcpy(output->name, config->output[output->index]);
-	output->type = V4L2_OUTPUT_TYPE_ANALOG;
-	output->std = VPIF_V4L2_STD;
-
-	return 0;
-}
-
-static int vpif_s_output(struct file *file, void *priv, unsigned int i)
-{
-	struct vpif_fh *fh = priv;
-	struct channel_obj *ch = fh->channel;
-	struct video_obj *vid_ch = &ch->video;
-	struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX];
-	int ret = 0;
-
-	if (common->started) {
-		vpif_err("Streaming in progress\n");
-		return -EBUSY;
-	}
-
-	ret = v4l2_device_call_until_err(&vpif_obj.v4l2_dev, 1, video,
-							s_routing, 0, i, 0);
-
-	if (ret < 0)
-		vpif_err("Failed to set output standard\n");
-
-	vid_ch->output_id = i;
-	return ret;
-}
-
-static int vpif_g_output(struct file *file, void *priv, unsigned int *i)
-{
-	struct vpif_fh *fh = priv;
-	struct channel_obj *ch = fh->channel;
-	struct video_obj *vid_ch = &ch->video;
-
-	*i = vid_ch->output_id;
-
-	return 0;
-}
-
-static int vpif_g_priority(struct file *file, void *priv, enum v4l2_priority *p)
-{
-	struct vpif_fh *fh = priv;
-	struct channel_obj *ch = fh->channel;
-
-	*p = v4l2_prio_max(&ch->prio);
-
-	return 0;
-}
-
-static int vpif_s_priority(struct file *file, void *priv, enum v4l2_priority p)
-{
-	struct vpif_fh *fh = priv;
-	struct channel_obj *ch = fh->channel;
-
-	return v4l2_prio_change(&ch->prio, &fh->prio, p);
-}
-
-/**
- * vpif_enum_dv_presets() - ENUM_DV_PRESETS handler
- * @file: file ptr
- * @priv: file handle
- * @preset: input preset
- */
-static int vpif_enum_dv_presets(struct file *file, void *priv,
-		struct v4l2_dv_enum_preset *preset)
-{
-	struct vpif_fh *fh = priv;
-	struct channel_obj *ch = fh->channel;
-	struct video_obj *vid_ch = &ch->video;
-
-	return v4l2_subdev_call(vpif_obj.sd[vid_ch->output_id],
-			video, enum_dv_presets, preset);
-}
-
-/**
- * vpif_s_dv_presets() - S_DV_PRESETS handler
- * @file: file ptr
- * @priv: file handle
- * @preset: input preset
- */
-static int vpif_s_dv_preset(struct file *file, void *priv,
-		struct v4l2_dv_preset *preset)
-{
-	struct vpif_fh *fh = priv;
-	struct channel_obj *ch = fh->channel;
-	struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX];
-	struct video_obj *vid_ch = &ch->video;
-	int ret = 0;
-
-	if (common->started) {
-		vpif_dbg(1, debug, "streaming in progress\n");
-		return -EBUSY;
-	}
-
-	ret = v4l2_prio_check(&ch->prio, fh->prio);
-	if (ret != 0)
-		return ret;
-
-	fh->initialized = 1;
-
-	/* Call encoder subdevice function to set the standard */
-	if (mutex_lock_interruptible(&common->lock))
-		return -ERESTARTSYS;
-
-	ch->video.dv_preset = preset->preset;
-	ch->video.stdid = V4L2_STD_UNKNOWN;
-	memset(&ch->video.bt_timings, 0, sizeof(ch->video.bt_timings));
-
-	/* Get the information about the standard */
-	if (vpif_update_resolution(ch)) {
-		ret = -EINVAL;
-	} else {
-		/* Configure the default format information */
-		vpif_config_format(ch);
-
-		ret = v4l2_subdev_call(vpif_obj.sd[vid_ch->output_id],
-				video, s_dv_preset, preset);
-	}
-
-	mutex_unlock(&common->lock);
-
-	return ret;
-}
-/**
- * vpif_g_dv_presets() - G_DV_PRESETS handler
- * @file: file ptr
- * @priv: file handle
- * @preset: input preset
- */
-static int vpif_g_dv_preset(struct file *file, void *priv,
-		struct v4l2_dv_preset *preset)
-{
-	struct vpif_fh *fh = priv;
-	struct channel_obj *ch = fh->channel;
-
-	preset->preset = ch->video.dv_preset;
-
-	return 0;
-}
-/**
- * vpif_s_dv_timings() - S_DV_TIMINGS handler
- * @file: file ptr
- * @priv: file handle
- * @timings: digital video timings
- */
-static int vpif_s_dv_timings(struct file *file, void *priv,
-		struct v4l2_dv_timings *timings)
-{
-	struct vpif_fh *fh = priv;
-	struct channel_obj *ch = fh->channel;
-	struct vpif_params *vpifparams = &ch->vpifparams;
-	struct vpif_channel_config_params *std_info = &vpifparams->std_info;
-	struct video_obj *vid_ch = &ch->video;
-	struct v4l2_bt_timings *bt = &vid_ch->bt_timings;
-	int ret;
-
-	if (timings->type != V4L2_DV_BT_656_1120) {
-		vpif_dbg(2, debug, "Timing type not defined\n");
-		return -EINVAL;
-	}
-
-	/* Configure subdevice timings, if any */
-	ret = v4l2_subdev_call(vpif_obj.sd[vid_ch->output_id],
-			video, s_dv_timings, timings);
-	if (ret == -ENOIOCTLCMD) {
-		vpif_dbg(2, debug, "Custom DV timings not supported by "
-				"subdevice\n");
-		return -EINVAL;
-	}
-	if (ret < 0) {
-		vpif_dbg(2, debug, "Error setting custom DV timings\n");
-		return ret;
-	}
-
-	if (!(timings->bt.width && timings->bt.height &&
-				(timings->bt.hbackporch ||
-				 timings->bt.hfrontporch ||
-				 timings->bt.hsync) &&
-				timings->bt.vfrontporch &&
-				(timings->bt.vbackporch ||
-				 timings->bt.vsync))) {
-		vpif_dbg(2, debug, "Timings for width, height, "
-				"horizontal back porch, horizontal sync, "
-				"horizontal front porch, vertical back porch, "
-				"vertical sync and vertical back porch "
-				"must be defined\n");
-		return -EINVAL;
-	}
-
-	*bt = timings->bt;
-
-	/* Configure video port timings */
-
-	std_info->eav2sav = bt->hbackporch + bt->hfrontporch +
-		bt->hsync - 8;
-	std_info->sav2eav = bt->width;
-
-	std_info->l1 = 1;
-	std_info->l3 = bt->vsync + bt->vbackporch + 1;
-
-	if (bt->interlaced) {
-		if (bt->il_vbackporch || bt->il_vfrontporch || bt->il_vsync) {
-			std_info->vsize = bt->height * 2 +
-				bt->vfrontporch + bt->vsync + bt->vbackporch +
-				bt->il_vfrontporch + bt->il_vsync +
-				bt->il_vbackporch;
-			std_info->l5 = std_info->vsize/2 -
-				(bt->vfrontporch - 1);
-			std_info->l7 = std_info->vsize/2 + 1;
-			std_info->l9 = std_info->l7 + bt->il_vsync +
-				bt->il_vbackporch + 1;
-			std_info->l11 = std_info->vsize -
-				(bt->il_vfrontporch - 1);
-		} else {
-			vpif_dbg(2, debug, "Required timing values for "
-					"interlaced BT format missing\n");
-			return -EINVAL;
-		}
-	} else {
-		std_info->vsize = bt->height + bt->vfrontporch +
-			bt->vsync + bt->vbackporch;
-		std_info->l5 = std_info->vsize - (bt->vfrontporch - 1);
-	}
-	strncpy(std_info->name, "Custom timings BT656/1120",
-			VPIF_MAX_NAME);
-	std_info->width = bt->width;
-	std_info->height = bt->height;
-	std_info->frm_fmt = bt->interlaced ? 0 : 1;
-	std_info->ycmux_mode = 0;
-	std_info->capture_format = 0;
-	std_info->vbi_supported = 0;
-	std_info->hd_sd = 1;
-	std_info->stdid = 0;
-	std_info->dv_preset = V4L2_DV_INVALID;
-
-	vid_ch->stdid = 0;
-	vid_ch->dv_preset = V4L2_DV_INVALID;
-
-	return 0;
-}
-
-/**
- * vpif_g_dv_timings() - G_DV_TIMINGS handler
- * @file: file ptr
- * @priv: file handle
- * @timings: digital video timings
- */
-static int vpif_g_dv_timings(struct file *file, void *priv,
-		struct v4l2_dv_timings *timings)
-{
-	struct vpif_fh *fh = priv;
-	struct channel_obj *ch = fh->channel;
-	struct video_obj *vid_ch = &ch->video;
-	struct v4l2_bt_timings *bt = &vid_ch->bt_timings;
-
-	timings->bt = *bt;
-
-	return 0;
-}
-
-/*
- * vpif_g_chip_ident() - Identify the chip
- * @file: file ptr
- * @priv: file handle
- * @chip: chip identity
- *
- * Returns zero or -EINVAL if read operations fails.
- */
-static int vpif_g_chip_ident(struct file *file, void *priv,
-		struct v4l2_dbg_chip_ident *chip)
-{
-	chip->ident = V4L2_IDENT_NONE;
-	chip->revision = 0;
-	if (chip->match.type != V4L2_CHIP_MATCH_I2C_DRIVER &&
-			chip->match.type != V4L2_CHIP_MATCH_I2C_ADDR) {
-		vpif_dbg(2, debug, "match_type is invalid.\n");
-		return -EINVAL;
-	}
-
-	return v4l2_device_call_until_err(&vpif_obj.v4l2_dev, 0, core,
-			g_chip_ident, chip);
-}
-
-#ifdef CONFIG_VIDEO_ADV_DEBUG
-/*
- * vpif_dbg_g_register() - Read register
- * @file: file ptr
- * @priv: file handle
- * @reg: register to be read
- *
- * Debugging only
- * Returns zero or -EINVAL if read operations fails.
- */
-static int vpif_dbg_g_register(struct file *file, void *priv,
-		struct v4l2_dbg_register *reg){
-	struct vpif_fh *fh = priv;
-	struct channel_obj *ch = fh->channel;
-	struct video_obj *vid_ch = &ch->video;
-
-	return v4l2_subdev_call(vpif_obj.sd[vid_ch->output_id], core,
-			g_register, reg);
-}
-
-/*
- * vpif_dbg_s_register() - Write to register
- * @file: file ptr
- * @priv: file handle
- * @reg: register to be modified
- *
- * Debugging only
- * Returns zero or -EINVAL if write operations fails.
- */
-static int vpif_dbg_s_register(struct file *file, void *priv,
-		struct v4l2_dbg_register *reg){
-	struct vpif_fh *fh = priv;
-	struct channel_obj *ch = fh->channel;
-	struct video_obj *vid_ch = &ch->video;
-
-	return v4l2_subdev_call(vpif_obj.sd[vid_ch->output_id], core,
-			s_register, reg);
-}
-#endif
-
-/*
- * vpif_log_status() - Status information
- * @file: file ptr
- * @priv: file handle
- *
- * Returns zero.
- */
-static int vpif_log_status(struct file *filep, void *priv)
-{
-	/* status for sub devices */
-	v4l2_device_call_all(&vpif_obj.v4l2_dev, 0, core, log_status);
-
-	return 0;
-}
-
-/* vpif display ioctl operations */
-static const struct v4l2_ioctl_ops vpif_ioctl_ops = {
-	.vidioc_querycap        	= vpif_querycap,
-	.vidioc_g_priority		= vpif_g_priority,
-	.vidioc_s_priority		= vpif_s_priority,
-	.vidioc_enum_fmt_vid_out	= vpif_enum_fmt_vid_out,
-	.vidioc_g_fmt_vid_out  		= vpif_g_fmt_vid_out,
-	.vidioc_s_fmt_vid_out   	= vpif_s_fmt_vid_out,
-	.vidioc_try_fmt_vid_out 	= vpif_try_fmt_vid_out,
-	.vidioc_reqbufs         	= vpif_reqbufs,
-	.vidioc_querybuf        	= vpif_querybuf,
-	.vidioc_qbuf            	= vpif_qbuf,
-	.vidioc_dqbuf           	= vpif_dqbuf,
-	.vidioc_streamon        	= vpif_streamon,
-	.vidioc_streamoff       	= vpif_streamoff,
-	.vidioc_s_std           	= vpif_s_std,
-	.vidioc_g_std			= vpif_g_std,
-	.vidioc_enum_output		= vpif_enum_output,
-	.vidioc_s_output		= vpif_s_output,
-	.vidioc_g_output		= vpif_g_output,
-	.vidioc_cropcap         	= vpif_cropcap,
-	.vidioc_enum_dv_presets         = vpif_enum_dv_presets,
-	.vidioc_s_dv_preset             = vpif_s_dv_preset,
-	.vidioc_g_dv_preset             = vpif_g_dv_preset,
-	.vidioc_s_dv_timings            = vpif_s_dv_timings,
-	.vidioc_g_dv_timings            = vpif_g_dv_timings,
-	.vidioc_g_chip_ident		= vpif_g_chip_ident,
-#ifdef CONFIG_VIDEO_ADV_DEBUG
-	.vidioc_g_register		= vpif_dbg_g_register,
-	.vidioc_s_register		= vpif_dbg_s_register,
-#endif
-	.vidioc_log_status		= vpif_log_status,
-};
-
-static const struct v4l2_file_operations vpif_fops = {
-	.owner		= THIS_MODULE,
-	.open		= vpif_open,
-	.release	= vpif_release,
-	.unlocked_ioctl	= video_ioctl2,
-	.mmap		= vpif_mmap,
-	.poll		= vpif_poll
-};
-
-static struct video_device vpif_video_template = {
-	.name		= "vpif",
-	.fops		= &vpif_fops,
-	.ioctl_ops	= &vpif_ioctl_ops,
-	.tvnorms	= VPIF_V4L2_STD,
-	.current_norm	= V4L2_STD_625_50,
-
-};
-
-/*Configure the channels, buffer sizei, request irq */
-static int initialize_vpif(void)
-{
-	int free_channel_objects_index;
-	int free_buffer_channel_index;
-	int free_buffer_index;
-	int err = 0, i, j;
-
-	/* Default number of buffers should be 3 */
-	if ((ch2_numbuffers > 0) &&
-	    (ch2_numbuffers < config_params.min_numbuffers))
-		ch2_numbuffers = config_params.min_numbuffers;
-	if ((ch3_numbuffers > 0) &&
-	    (ch3_numbuffers < config_params.min_numbuffers))
-		ch3_numbuffers = config_params.min_numbuffers;
-
-	/* Set buffer size to min buffers size if invalid buffer size is
-	 * given */
-	if (ch2_bufsize < config_params.min_bufsize[VPIF_CHANNEL2_VIDEO])
-		ch2_bufsize =
-		    config_params.min_bufsize[VPIF_CHANNEL2_VIDEO];
-	if (ch3_bufsize < config_params.min_bufsize[VPIF_CHANNEL3_VIDEO])
-		ch3_bufsize =
-		    config_params.min_bufsize[VPIF_CHANNEL3_VIDEO];
-
-	config_params.numbuffers[VPIF_CHANNEL2_VIDEO] = ch2_numbuffers;
-
-	if (ch2_numbuffers) {
-		config_params.channel_bufsize[VPIF_CHANNEL2_VIDEO] =
-							ch2_bufsize;
-	}
-	config_params.numbuffers[VPIF_CHANNEL3_VIDEO] = ch3_numbuffers;
-
-	if (ch3_numbuffers) {
-		config_params.channel_bufsize[VPIF_CHANNEL3_VIDEO] =
-							ch3_bufsize;
-	}
-
-	/* Allocate memory for six channel objects */
-	for (i = 0; i < VPIF_DISPLAY_MAX_DEVICES; i++) {
-		vpif_obj.dev[i] =
-		    kzalloc(sizeof(struct channel_obj), GFP_KERNEL);
-		/* If memory allocation fails, return error */
-		if (!vpif_obj.dev[i]) {
-			free_channel_objects_index = i;
-			err = -ENOMEM;
-			goto vpif_init_free_channel_objects;
-		}
-	}
-
-	free_channel_objects_index = VPIF_DISPLAY_MAX_DEVICES;
-	free_buffer_channel_index = VPIF_DISPLAY_NUM_CHANNELS;
-	free_buffer_index = config_params.numbuffers[i - 1];
-
-	return 0;
-
-vpif_init_free_channel_objects:
-	for (j = 0; j < free_channel_objects_index; j++)
-		kfree(vpif_obj.dev[j]);
-	return err;
-}
-
-/*
- * vpif_probe: This function creates device entries by register itself to the
- * V4L2 driver and initializes fields of each channel objects
- */
-static __init int vpif_probe(struct platform_device *pdev)
-{
-	struct vpif_subdev_info *subdevdata;
-	struct vpif_display_config *config;
-	int i, j = 0, k, q, m, err = 0;
-	struct i2c_adapter *i2c_adap;
-	struct common_obj *common;
-	struct channel_obj *ch;
-	struct video_device *vfd;
-	struct resource *res;
-	int subdev_count;
-	size_t size;
-
-	vpif_dev = &pdev->dev;
-	err = initialize_vpif();
-
-	if (err) {
-		v4l2_err(vpif_dev->driver, "Error initializing vpif\n");
-		return err;
-	}
-
-	err = v4l2_device_register(vpif_dev, &vpif_obj.v4l2_dev);
-	if (err) {
-		v4l2_err(vpif_dev->driver, "Error registering v4l2 device\n");
-		return err;
-	}
-
-	k = 0;
-	while ((res = platform_get_resource(pdev, IORESOURCE_IRQ, k))) {
-		for (i = res->start; i <= res->end; i++) {
-			if (request_irq(i, vpif_channel_isr, IRQF_SHARED,
-					"VPIF_Display",
-				(void *)(&vpif_obj.dev[k]->channel_id))) {
-				err = -EBUSY;
-				goto vpif_int_err;
-			}
-		}
-		k++;
-	}
-
-	for (i = 0; i < VPIF_DISPLAY_MAX_DEVICES; i++) {
-
-		/* Get the pointer to the channel object */
-		ch = vpif_obj.dev[i];
-
-		/* Allocate memory for video device */
-		vfd = video_device_alloc();
-		if (vfd == NULL) {
-			for (j = 0; j < i; j++) {
-				ch = vpif_obj.dev[j];
-				video_device_release(ch->video_dev);
-			}
-			err = -ENOMEM;
-			goto vpif_int_err;
-		}
-
-		/* Initialize field of video device */
-		*vfd = vpif_video_template;
-		vfd->v4l2_dev = &vpif_obj.v4l2_dev;
-		vfd->release = video_device_release;
-		snprintf(vfd->name, sizeof(vfd->name),
-			 "VPIF_Display_DRIVER_V%s",
-			 VPIF_DISPLAY_VERSION);
-
-		/* Set video_dev to the video device */
-		ch->video_dev = vfd;
-	}
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (res) {
-		size = resource_size(res);
-		/* The resources are divided into two equal memory and when
-		 * we have HD output we can add them together
-		 */
-		for (j = 0; j < VPIF_DISPLAY_MAX_DEVICES; j++) {
-			ch = vpif_obj.dev[j];
-			ch->channel_id = j;
-
-			/* only enabled if second resource exists */
-			config_params.video_limit[ch->channel_id] = 0;
-			if (size)
-				config_params.video_limit[ch->channel_id] =
-									size/2;
-		}
-	}
-
-	for (j = 0; j < VPIF_DISPLAY_MAX_DEVICES; j++) {
-		ch = vpif_obj.dev[j];
-		/* Initialize field of the channel objects */
-		atomic_set(&ch->usrs, 0);
-		for (k = 0; k < VPIF_NUMOBJECTS; k++) {
-			ch->common[k].numbuffers = 0;
-			common = &ch->common[k];
-			common->io_usrs = 0;
-			common->started = 0;
-			spin_lock_init(&common->irqlock);
-			mutex_init(&common->lock);
-			common->numbuffers = 0;
-			common->set_addr = NULL;
-			common->ytop_off = common->ybtm_off = 0;
-			common->ctop_off = common->cbtm_off = 0;
-			common->cur_frm = common->next_frm = NULL;
-			memset(&common->fmt, 0, sizeof(common->fmt));
-			common->numbuffers = config_params.numbuffers[k];
-
-		}
-		ch->initialized = 0;
-		ch->channel_id = j;
-		if (j < 2)
-			ch->common[VPIF_VIDEO_INDEX].numbuffers =
-			    config_params.numbuffers[ch->channel_id];
-		else
-			ch->common[VPIF_VIDEO_INDEX].numbuffers = 0;
-
-		memset(&ch->vpifparams, 0, sizeof(ch->vpifparams));
-
-		/* Initialize prio member of channel object */
-		v4l2_prio_init(&ch->prio);
-		ch->common[VPIF_VIDEO_INDEX].fmt.type =
-						V4L2_BUF_TYPE_VIDEO_OUTPUT;
-		ch->video_dev->lock = &common->lock;
-
-		/* register video device */
-		vpif_dbg(1, debug, "channel=%x,channel->video_dev=%x\n",
-				(int)ch, (int)&ch->video_dev);
-
-		err = video_register_device(ch->video_dev,
-					  VFL_TYPE_GRABBER, (j ? 3 : 2));
-		if (err < 0)
-			goto probe_out;
-
-		video_set_drvdata(ch->video_dev, ch);
-	}
-
-	i2c_adap = i2c_get_adapter(1);
-	config = pdev->dev.platform_data;
-	subdev_count = config->subdev_count;
-	subdevdata = config->subdevinfo;
-	vpif_obj.sd = kzalloc(sizeof(struct v4l2_subdev *) * subdev_count,
-								GFP_KERNEL);
-	if (vpif_obj.sd == NULL) {
-		vpif_err("unable to allocate memory for subdevice pointers\n");
-		err = -ENOMEM;
-		goto probe_out;
-	}
-
-	for (i = 0; i < subdev_count; i++) {
-		vpif_obj.sd[i] = v4l2_i2c_new_subdev_board(&vpif_obj.v4l2_dev,
-						i2c_adap,
-						&subdevdata[i].board_info,
-						NULL);
-		if (!vpif_obj.sd[i]) {
-			vpif_err("Error registering v4l2 subdevice\n");
-			goto probe_subdev_out;
-		}
-
-		if (vpif_obj.sd[i])
-			vpif_obj.sd[i]->grp_id = 1 << i;
-	}
-
-	v4l2_info(&vpif_obj.v4l2_dev,
-			" VPIF display driver initialized\n");
-	return 0;
-
-probe_subdev_out:
-	kfree(vpif_obj.sd);
-probe_out:
-	for (k = 0; k < j; k++) {
-		ch = vpif_obj.dev[k];
-		video_unregister_device(ch->video_dev);
-		video_device_release(ch->video_dev);
-		ch->video_dev = NULL;
-	}
-vpif_int_err:
-	v4l2_device_unregister(&vpif_obj.v4l2_dev);
-	vpif_err("VPIF IRQ request failed\n");
-	for (q = k; k >= 0; k--) {
-		for (m = i; m >= res->start; m--)
-			free_irq(m, (void *)(&vpif_obj.dev[k]->channel_id));
-		res = platform_get_resource(pdev, IORESOURCE_IRQ, k-1);
-		m = res->end;
-	}
-
-	return err;
-}
-
-/*
- * vpif_remove: It un-register channels from V4L2 driver
- */
-static int vpif_remove(struct platform_device *device)
-{
-	struct channel_obj *ch;
-	int i;
-
-	v4l2_device_unregister(&vpif_obj.v4l2_dev);
-
-	/* un-register device */
-	for (i = 0; i < VPIF_DISPLAY_MAX_DEVICES; i++) {
-		/* Get the pointer to the channel object */
-		ch = vpif_obj.dev[i];
-		/* Unregister video device */
-		video_unregister_device(ch->video_dev);
-
-		ch->video_dev = NULL;
-	}
-
-	return 0;
-}
-
-#ifdef CONFIG_PM
-static int vpif_suspend(struct device *dev)
-{
-	struct common_obj *common;
-	struct channel_obj *ch;
-	int i;
-
-	for (i = 0; i < VPIF_DISPLAY_MAX_DEVICES; i++) {
-		/* Get the pointer to the channel object */
-		ch = vpif_obj.dev[i];
-		common = &ch->common[VPIF_VIDEO_INDEX];
-		mutex_lock(&common->lock);
-		if (atomic_read(&ch->usrs) && common->io_usrs) {
-			/* Disable channel */
-			if (ch->channel_id == VPIF_CHANNEL2_VIDEO) {
-				enable_channel2(0);
-				channel2_intr_enable(0);
-			}
-			if (ch->channel_id == VPIF_CHANNEL3_VIDEO ||
-					common->started == 2) {
-				enable_channel3(0);
-				channel3_intr_enable(0);
-			}
-		}
-		mutex_unlock(&common->lock);
-	}
-
-	return 0;
-}
-
-static int vpif_resume(struct device *dev)
-{
-
-	struct common_obj *common;
-	struct channel_obj *ch;
-	int i;
-
-	for (i = 0; i < VPIF_DISPLAY_MAX_DEVICES; i++) {
-		/* Get the pointer to the channel object */
-		ch = vpif_obj.dev[i];
-		common = &ch->common[VPIF_VIDEO_INDEX];
-		mutex_lock(&common->lock);
-		if (atomic_read(&ch->usrs) && common->io_usrs) {
-			/* Enable channel */
-			if (ch->channel_id == VPIF_CHANNEL2_VIDEO) {
-				enable_channel2(1);
-				channel2_intr_enable(1);
-			}
-			if (ch->channel_id == VPIF_CHANNEL3_VIDEO ||
-					common->started == 2) {
-				enable_channel3(1);
-				channel3_intr_enable(1);
-			}
-		}
-		mutex_unlock(&common->lock);
-	}
-
-	return 0;
-}
-
-static const struct dev_pm_ops vpif_pm = {
-	.suspend        = vpif_suspend,
-	.resume         = vpif_resume,
-};
-
-#define vpif_pm_ops (&vpif_pm)
-#else
-#define vpif_pm_ops NULL
-#endif
-
-static __refdata struct platform_driver vpif_driver = {
-	.driver	= {
-			.name	= "vpif_display",
-			.owner	= THIS_MODULE,
-			.pm	= vpif_pm_ops,
-	},
-	.probe	= vpif_probe,
-	.remove	= vpif_remove,
-};
-
-static __init int vpif_init(void)
-{
-	return platform_driver_register(&vpif_driver);
-}
-
-/*
- * vpif_cleanup: This function un-registers device and driver to the kernel,
- * frees requested irq handler and de-allocates memory allocated for channel
- * objects.
- */
-static void vpif_cleanup(void)
-{
-	struct platform_device *pdev;
-	struct resource *res;
-	int irq_num;
-	int i = 0;
-
-	pdev = container_of(vpif_dev, struct platform_device, dev);
-
-	while ((res = platform_get_resource(pdev, IORESOURCE_IRQ, i))) {
-		for (irq_num = res->start; irq_num <= res->end; irq_num++)
-			free_irq(irq_num,
-				 (void *)(&vpif_obj.dev[i]->channel_id));
-		i++;
-	}
-
-	platform_driver_unregister(&vpif_driver);
-	kfree(vpif_obj.sd);
-	for (i = 0; i < VPIF_DISPLAY_MAX_DEVICES; i++)
-		kfree(vpif_obj.dev[i]);
-}
-
-module_init(vpif_init);
-module_exit(vpif_cleanup);
diff --git a/drivers/media/video/davinci/vpif_display.h b/drivers/media/video/davinci/vpif_display.h
deleted file mode 100644
index 8967ffb4405..00000000000
--- a/drivers/media/video/davinci/vpif_display.h
+++ /dev/null
@@ -1,181 +0,0 @@
-/*
- * VPIF display header file
- *
- * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed .as is. WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef DAVINCIHD_DISPLAY_H
-#define DAVINCIHD_DISPLAY_H
-
-/* Header files */
-#include <linux/videodev2.h>
-#include <media/v4l2-common.h>
-#include <media/v4l2-device.h>
-#include <media/videobuf-core.h>
-#include <media/videobuf2-dma-contig.h>
-#include <media/davinci/vpif_types.h>
-
-#include "vpif.h"
-
-/* Macros */
-#define VPIF_DISPLAY_VERSION	"0.0.2"
-
-#define VPIF_VALID_FIELD(field) \
-	(((V4L2_FIELD_ANY == field) || (V4L2_FIELD_NONE == field)) || \
-	(((V4L2_FIELD_INTERLACED == field) || (V4L2_FIELD_SEQ_TB == field)) || \
-	(V4L2_FIELD_SEQ_BT == field)))
-
-#define VPIF_DISPLAY_MAX_DEVICES	(2)
-#define VPIF_SLICED_BUF_SIZE		(256)
-#define VPIF_SLICED_MAX_SERVICES	(3)
-#define VPIF_VIDEO_INDEX		(0)
-#define VPIF_VBI_INDEX			(1)
-#define VPIF_HBI_INDEX			(2)
-
-/* Setting it to 1 as HBI/VBI support yet to be added , else 3*/
-#define VPIF_NUMOBJECTS	(1)
-
-/* Macros */
-#define ISALIGNED(a)    (0 == ((a) & 7))
-
-/* enumerated data types */
-/* Enumerated data type to give id to each device per channel */
-enum vpif_channel_id {
-	VPIF_CHANNEL2_VIDEO = 0,	/* Channel2 Video */
-	VPIF_CHANNEL3_VIDEO,		/* Channel3 Video */
-};
-
-/* structures */
-
-struct video_obj {
-	enum v4l2_field buf_field;
-	u32 latest_only;		/* indicate whether to return
-					 * most recent displayed frame only */
-	v4l2_std_id stdid;		/* Currently selected or default
-					 * standard */
-	u32 dv_preset;
-	struct v4l2_bt_timings bt_timings;
-	u32 output_id;			/* Current output id */
-};
-
-struct vbi_obj {
-	int num_services;
-	struct vpif_vbi_params vbiparams;	/* vpif parameters for the raw
-						 * vbi data */
-};
-
-struct vpif_disp_buffer {
-	struct vb2_buffer vb;
-	struct list_head list;
-};
-
-struct common_obj {
-	/* Buffer specific parameters */
-	u8 *fbuffers[VIDEO_MAX_FRAME];		/* List of buffer pointers for
-						 * storing frames */
-	u32 numbuffers;				/* number of buffers */
-	struct vpif_disp_buffer *cur_frm;	/* Pointer pointing to current
-						 * vb2_buffer */
-	struct vpif_disp_buffer *next_frm;	/* Pointer pointing to next
-						 * vb2_buffer */
-	enum v4l2_memory memory;		/* This field keeps track of
-						 * type of buffer exchange
-						 * method user has selected */
-	struct v4l2_format fmt;			/* Used to store the format */
-	struct vb2_queue buffer_queue;		/* Buffer queue used in
-						 * video-buf */
-	/* allocator-specific contexts for each plane */
-	struct vb2_alloc_ctx *alloc_ctx;
-
-	struct list_head dma_queue;		/* Queue of filled frames */
-	spinlock_t irqlock;			/* Used in video-buf */
-
-	/* channel specific parameters */
-	struct mutex lock;			/* lock used to access this
-						 * structure */
-	u32 io_usrs;				/* number of users performing
-						 * IO */
-	u8 started;				/* Indicates whether streaming
-						 * started */
-	u32 ytop_off;				/* offset of Y top from the
-						 * starting of the buffer */
-	u32 ybtm_off;				/* offset of Y bottom from the
-						 * starting of the buffer */
-	u32 ctop_off;				/* offset of C top from the
-						 * starting of the buffer */
-	u32 cbtm_off;				/* offset of C bottom from the
-						 * starting of the buffer */
-	/* Function pointer to set the addresses */
-	void (*set_addr) (unsigned long, unsigned long,
-				unsigned long, unsigned long);
-	u32 height;
-	u32 width;
-};
-
-struct channel_obj {
-	/* V4l2 specific parameters */
-	struct video_device *video_dev;	/* Identifies video device for
-					 * this channel */
-	struct v4l2_prio_state prio;	/* Used to keep track of state of
-					 * the priority */
-	atomic_t usrs;			/* number of open instances of
-					 * the channel */
-	u32 field_id;			/* Indicates id of the field
-					 * which is being displayed */
-	u8 initialized;			/* flag to indicate whether
-					 * encoder is initialized */
-
-	enum vpif_channel_id channel_id;/* Identifies channel */
-	struct vpif_params vpifparams;
-	struct common_obj common[VPIF_NUMOBJECTS];
-	struct video_obj video;
-	struct vbi_obj vbi;
-};
-
-/* File handle structure */
-struct vpif_fh {
-	struct channel_obj *channel;	/* pointer to channel object for
-					 * opened device */
-	u8 io_allowed[VPIF_NUMOBJECTS];	/* Indicates whether this file handle
-					 * is doing IO */
-	enum v4l2_priority prio;	/* Used to keep track priority of
-					 * this instance */
-	u8 initialized;			/* Used to keep track of whether this
-					 * file handle has initialized
-					 * channel or not */
-};
-
-/* vpif device structure */
-struct vpif_device {
-	struct v4l2_device v4l2_dev;
-	struct channel_obj *dev[VPIF_DISPLAY_NUM_CHANNELS];
-	struct v4l2_subdev **sd;
-
-};
-
-struct vpif_config_params {
-	u32 min_bufsize[VPIF_DISPLAY_NUM_CHANNELS];
-	u32 channel_bufsize[VPIF_DISPLAY_NUM_CHANNELS];
-	u8 numbuffers[VPIF_DISPLAY_NUM_CHANNELS];
-	u32 video_limit[VPIF_DISPLAY_NUM_CHANNELS];
-	u8 min_numbuffers;
-};
-
-/* Struct which keeps track of the line numbers for the sliced vbi service */
-struct vpif_service_line {
-	u16 service_id;
-	u16 service_line[2];
-	u16 enc_service_id;
-	u8 bytestowrite;
-};
-
-#endif				/* DAVINCIHD_DISPLAY_H */
diff --git a/drivers/media/video/davinci/vpss.c b/drivers/media/video/davinci/vpss.c
deleted file mode 100644
index 146e4b01ac1..00000000000
--- a/drivers/media/video/davinci/vpss.c
+++ /dev/null
@@ -1,482 +0,0 @@
-/*
- * Copyright (C) 2009 Texas Instruments.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * common vpss system module platform driver for all video drivers.
- */
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/spinlock.h>
-#include <linux/compiler.h>
-#include <linux/io.h>
-#include <mach/hardware.h>
-#include <media/davinci/vpss.h>
-
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("VPSS Driver");
-MODULE_AUTHOR("Texas Instruments");
-
-/* DM644x defines */
-#define DM644X_SBL_PCR_VPSS		(4)
-
-#define DM355_VPSSBL_INTSEL		0x10
-#define DM355_VPSSBL_EVTSEL		0x14
-/* vpss BL register offsets */
-#define DM355_VPSSBL_CCDCMUX		0x1c
-/* vpss CLK register offsets */
-#define DM355_VPSSCLK_CLKCTRL		0x04
-/* masks and shifts */
-#define VPSS_HSSISEL_SHIFT		4
-/*
- * VDINT0 - vpss_int0, VDINT1 - vpss_int1, H3A - vpss_int4,
- * IPIPE_INT1_SDR - vpss_int5
- */
-#define DM355_VPSSBL_INTSEL_DEFAULT	0xff83ff10
-/* VENCINT - vpss_int8 */
-#define DM355_VPSSBL_EVTSEL_DEFAULT	0x4
-
-#define DM365_ISP5_PCCR 		0x04
-#define DM365_ISP5_INTSEL1		0x10
-#define DM365_ISP5_INTSEL2		0x14
-#define DM365_ISP5_INTSEL3		0x18
-#define DM365_ISP5_CCDCMUX 		0x20
-#define DM365_ISP5_PG_FRAME_SIZE 	0x28
-#define DM365_VPBE_CLK_CTRL 		0x00
-/*
- * vpss interrupts. VDINT0 - vpss_int0, VDINT1 - vpss_int1,
- * AF - vpss_int3
- */
-#define DM365_ISP5_INTSEL1_DEFAULT	0x0b1f0100
-/* AEW - vpss_int6, RSZ_INT_DMA - vpss_int5 */
-#define DM365_ISP5_INTSEL2_DEFAULT	0x1f0a0f1f
-/* VENC - vpss_int8 */
-#define DM365_ISP5_INTSEL3_DEFAULT	0x00000015
-
-/* masks and shifts for DM365*/
-#define DM365_CCDC_PG_VD_POL_SHIFT 	0
-#define DM365_CCDC_PG_HD_POL_SHIFT 	1
-
-#define CCD_SRC_SEL_MASK		(BIT_MASK(5) | BIT_MASK(4))
-#define CCD_SRC_SEL_SHIFT		4
-
-/* Different SoC platforms supported by this driver */
-enum vpss_platform_type {
-	DM644X,
-	DM355,
-	DM365,
-};
-
-/*
- * vpss operations. Depends on platform. Not all functions are available
- * on all platforms. The api, first check if a functio is available before
- * invoking it. In the probe, the function ptrs are initialized based on
- * vpss name. vpss name can be "dm355_vpss", "dm644x_vpss" etc.
- */
-struct vpss_hw_ops {
-	/* enable clock */
-	int (*enable_clock)(enum vpss_clock_sel clock_sel, int en);
-	/* select input to ccdc */
-	void (*select_ccdc_source)(enum vpss_ccdc_source_sel src_sel);
-	/* clear wbl overflow bit */
-	int (*clear_wbl_overflow)(enum vpss_wbl_sel wbl_sel);
-};
-
-/* vpss configuration */
-struct vpss_oper_config {
-	__iomem void *vpss_regs_base0;
-	__iomem void *vpss_regs_base1;
-	enum vpss_platform_type platform;
-	spinlock_t vpss_lock;
-	struct vpss_hw_ops hw_ops;
-};
-
-static struct vpss_oper_config oper_cfg;
-
-/* register access routines */
-static inline u32 bl_regr(u32 offset)
-{
-	return __raw_readl(oper_cfg.vpss_regs_base0 + offset);
-}
-
-static inline void bl_regw(u32 val, u32 offset)
-{
-	__raw_writel(val, oper_cfg.vpss_regs_base0 + offset);
-}
-
-static inline u32 vpss_regr(u32 offset)
-{
-	return __raw_readl(oper_cfg.vpss_regs_base1 + offset);
-}
-
-static inline void vpss_regw(u32 val, u32 offset)
-{
-	__raw_writel(val, oper_cfg.vpss_regs_base1 + offset);
-}
-
-/* For DM365 only */
-static inline u32 isp5_read(u32 offset)
-{
-	return __raw_readl(oper_cfg.vpss_regs_base0 + offset);
-}
-
-/* For DM365 only */
-static inline void isp5_write(u32 val, u32 offset)
-{
-	__raw_writel(val, oper_cfg.vpss_regs_base0 + offset);
-}
-
-static void dm365_select_ccdc_source(enum vpss_ccdc_source_sel src_sel)
-{
-	u32 temp = isp5_read(DM365_ISP5_CCDCMUX) & ~CCD_SRC_SEL_MASK;
-
-	/* if we are using pattern generator, enable it */
-	if (src_sel == VPSS_PGLPBK || src_sel == VPSS_CCDCPG)
-		temp |= 0x08;
-
-	temp |= (src_sel << CCD_SRC_SEL_SHIFT);
-	isp5_write(temp, DM365_ISP5_CCDCMUX);
-}
-
-static void dm355_select_ccdc_source(enum vpss_ccdc_source_sel src_sel)
-{
-	bl_regw(src_sel << VPSS_HSSISEL_SHIFT, DM355_VPSSBL_CCDCMUX);
-}
-
-int vpss_select_ccdc_source(enum vpss_ccdc_source_sel src_sel)
-{
-	if (!oper_cfg.hw_ops.select_ccdc_source)
-		return -EINVAL;
-
-	oper_cfg.hw_ops.select_ccdc_source(src_sel);
-	return 0;
-}
-EXPORT_SYMBOL(vpss_select_ccdc_source);
-
-static int dm644x_clear_wbl_overflow(enum vpss_wbl_sel wbl_sel)
-{
-	u32 mask = 1, val;
-
-	if (wbl_sel < VPSS_PCR_AEW_WBL_0 ||
-	    wbl_sel > VPSS_PCR_CCDC_WBL_O)
-		return -EINVAL;
-
-	/* writing a 0 clear the overflow */
-	mask = ~(mask << wbl_sel);
-	val = bl_regr(DM644X_SBL_PCR_VPSS) & mask;
-	bl_regw(val, DM644X_SBL_PCR_VPSS);
-	return 0;
-}
-
-int vpss_clear_wbl_overflow(enum vpss_wbl_sel wbl_sel)
-{
-	if (!oper_cfg.hw_ops.clear_wbl_overflow)
-		return -EINVAL;
-
-	return oper_cfg.hw_ops.clear_wbl_overflow(wbl_sel);
-}
-EXPORT_SYMBOL(vpss_clear_wbl_overflow);
-
-/*
- *  dm355_enable_clock - Enable VPSS Clock
- *  @clock_sel: CLock to be enabled/disabled
- *  @en: enable/disable flag
- *
- *  This is called to enable or disable a vpss clock
- */
-static int dm355_enable_clock(enum vpss_clock_sel clock_sel, int en)
-{
-	unsigned long flags;
-	u32 utemp, mask = 0x1, shift = 0;
-
-	switch (clock_sel) {
-	case VPSS_VPBE_CLOCK:
-		/* nothing since lsb */
-		break;
-	case VPSS_VENC_CLOCK_SEL:
-		shift = 2;
-		break;
-	case VPSS_CFALD_CLOCK:
-		shift = 3;
-		break;
-	case VPSS_H3A_CLOCK:
-		shift = 4;
-		break;
-	case VPSS_IPIPE_CLOCK:
-		shift = 5;
-		break;
-	case VPSS_CCDC_CLOCK:
-		shift = 6;
-		break;
-	default:
-		printk(KERN_ERR "dm355_enable_clock:"
-				" Invalid selector: %d\n", clock_sel);
-		return -EINVAL;
-	}
-
-	spin_lock_irqsave(&oper_cfg.vpss_lock, flags);
-	utemp = vpss_regr(DM355_VPSSCLK_CLKCTRL);
-	if (!en)
-		utemp &= ~(mask << shift);
-	else
-		utemp |= (mask << shift);
-
-	vpss_regw(utemp, DM355_VPSSCLK_CLKCTRL);
-	spin_unlock_irqrestore(&oper_cfg.vpss_lock, flags);
-	return 0;
-}
-
-static int dm365_enable_clock(enum vpss_clock_sel clock_sel, int en)
-{
-	unsigned long flags;
-	u32 utemp, mask = 0x1, shift = 0, offset = DM365_ISP5_PCCR;
-	u32 (*read)(u32 offset) = isp5_read;
-	void(*write)(u32 val, u32 offset) = isp5_write;
-
-	switch (clock_sel) {
-	case VPSS_BL_CLOCK:
-		break;
-	case VPSS_CCDC_CLOCK:
-		shift = 1;
-		break;
-	case VPSS_H3A_CLOCK:
-		shift = 2;
-		break;
-	case VPSS_RSZ_CLOCK:
-		shift = 3;
-		break;
-	case VPSS_IPIPE_CLOCK:
-		shift = 4;
-		break;
-	case VPSS_IPIPEIF_CLOCK:
-		shift = 5;
-		break;
-	case VPSS_PCLK_INTERNAL:
-		shift = 6;
-		break;
-	case VPSS_PSYNC_CLOCK_SEL:
-		shift = 7;
-		break;
-	case VPSS_VPBE_CLOCK:
-		read = vpss_regr;
-		write = vpss_regw;
-		offset = DM365_VPBE_CLK_CTRL;
-		break;
-	case VPSS_VENC_CLOCK_SEL:
-		shift = 2;
-		read = vpss_regr;
-		write = vpss_regw;
-		offset = DM365_VPBE_CLK_CTRL;
-		break;
-	case VPSS_LDC_CLOCK:
-		shift = 3;
-		read = vpss_regr;
-		write = vpss_regw;
-		offset = DM365_VPBE_CLK_CTRL;
-		break;
-	case VPSS_FDIF_CLOCK:
-		shift = 4;
-		read = vpss_regr;
-		write = vpss_regw;
-		offset = DM365_VPBE_CLK_CTRL;
-		break;
-	case VPSS_OSD_CLOCK_SEL:
-		shift = 6;
-		read = vpss_regr;
-		write = vpss_regw;
-		offset = DM365_VPBE_CLK_CTRL;
-		break;
-	case VPSS_LDC_CLOCK_SEL:
-		shift = 7;
-		read = vpss_regr;
-		write = vpss_regw;
-		offset = DM365_VPBE_CLK_CTRL;
-		break;
-	default:
-		printk(KERN_ERR "dm365_enable_clock: Invalid selector: %d\n",
-		       clock_sel);
-		return -1;
-	}
-
-	spin_lock_irqsave(&oper_cfg.vpss_lock, flags);
-	utemp = read(offset);
-	if (!en) {
-		mask = ~mask;
-		utemp &= (mask << shift);
-	} else
-		utemp |= (mask << shift);
-
-	write(utemp, offset);
-	spin_unlock_irqrestore(&oper_cfg.vpss_lock, flags);
-
-	return 0;
-}
-
-int vpss_enable_clock(enum vpss_clock_sel clock_sel, int en)
-{
-	if (!oper_cfg.hw_ops.enable_clock)
-		return -EINVAL;
-
-	return oper_cfg.hw_ops.enable_clock(clock_sel, en);
-}
-EXPORT_SYMBOL(vpss_enable_clock);
-
-void dm365_vpss_set_sync_pol(struct vpss_sync_pol sync)
-{
-	int val = 0;
-	val = isp5_read(DM365_ISP5_CCDCMUX);
-
-	val |= (sync.ccdpg_hdpol << DM365_CCDC_PG_HD_POL_SHIFT);
-	val |= (sync.ccdpg_vdpol << DM365_CCDC_PG_VD_POL_SHIFT);
-
-	isp5_write(val, DM365_ISP5_CCDCMUX);
-}
-EXPORT_SYMBOL(dm365_vpss_set_sync_pol);
-
-void dm365_vpss_set_pg_frame_size(struct vpss_pg_frame_size frame_size)
-{
-	int current_reg = ((frame_size.hlpfr >> 1) - 1) << 16;
-
-	current_reg |= (frame_size.pplen - 1);
-	isp5_write(current_reg, DM365_ISP5_PG_FRAME_SIZE);
-}
-EXPORT_SYMBOL(dm365_vpss_set_pg_frame_size);
-
-static int __devinit vpss_probe(struct platform_device *pdev)
-{
-	struct resource		*r1, *r2;
-	char *platform_name;
-	int status;
-
-	if (!pdev->dev.platform_data) {
-		dev_err(&pdev->dev, "no platform data\n");
-		return -ENOENT;
-	}
-
-	platform_name = pdev->dev.platform_data;
-	if (!strcmp(platform_name, "dm355_vpss"))
-		oper_cfg.platform = DM355;
-	else if (!strcmp(platform_name, "dm365_vpss"))
-		oper_cfg.platform = DM365;
-	else if (!strcmp(platform_name, "dm644x_vpss"))
-		oper_cfg.platform = DM644X;
-	else {
-		dev_err(&pdev->dev, "vpss driver not supported on"
-			" this platform\n");
-		return -ENODEV;
-	}
-
-	dev_info(&pdev->dev, "%s vpss probed\n", platform_name);
-	r1 = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!r1)
-		return -ENOENT;
-
-	r1 = request_mem_region(r1->start, resource_size(r1), r1->name);
-	if (!r1)
-		return -EBUSY;
-
-	oper_cfg.vpss_regs_base0 = ioremap(r1->start, resource_size(r1));
-	if (!oper_cfg.vpss_regs_base0) {
-		status = -EBUSY;
-		goto fail1;
-	}
-
-	if (oper_cfg.platform == DM355 || oper_cfg.platform == DM365) {
-		r2 = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-		if (!r2) {
-			status = -ENOENT;
-			goto fail2;
-		}
-		r2 = request_mem_region(r2->start, resource_size(r2), r2->name);
-		if (!r2) {
-			status = -EBUSY;
-			goto fail2;
-		}
-
-		oper_cfg.vpss_regs_base1 = ioremap(r2->start,
-						   resource_size(r2));
-		if (!oper_cfg.vpss_regs_base1) {
-			status = -EBUSY;
-			goto fail3;
-		}
-	}
-
-	if (oper_cfg.platform == DM355) {
-		oper_cfg.hw_ops.enable_clock = dm355_enable_clock;
-		oper_cfg.hw_ops.select_ccdc_source = dm355_select_ccdc_source;
-		/* Setup vpss interrupts */
-		bl_regw(DM355_VPSSBL_INTSEL_DEFAULT, DM355_VPSSBL_INTSEL);
-		bl_regw(DM355_VPSSBL_EVTSEL_DEFAULT, DM355_VPSSBL_EVTSEL);
-	} else if (oper_cfg.platform == DM365) {
-		oper_cfg.hw_ops.enable_clock = dm365_enable_clock;
-		oper_cfg.hw_ops.select_ccdc_source = dm365_select_ccdc_source;
-		/* Setup vpss interrupts */
-		isp5_write(DM365_ISP5_INTSEL1_DEFAULT, DM365_ISP5_INTSEL1);
-		isp5_write(DM365_ISP5_INTSEL2_DEFAULT, DM365_ISP5_INTSEL2);
-		isp5_write(DM365_ISP5_INTSEL3_DEFAULT, DM365_ISP5_INTSEL3);
-	} else
-		oper_cfg.hw_ops.clear_wbl_overflow = dm644x_clear_wbl_overflow;
-
-	spin_lock_init(&oper_cfg.vpss_lock);
-	dev_info(&pdev->dev, "%s vpss probe success\n", platform_name);
-	return 0;
-
-fail3:
-	release_mem_region(r2->start, resource_size(r2));
-fail2:
-	iounmap(oper_cfg.vpss_regs_base0);
-fail1:
-	release_mem_region(r1->start, resource_size(r1));
-	return status;
-}
-
-static int __devexit vpss_remove(struct platform_device *pdev)
-{
-	struct resource		*res;
-
-	iounmap(oper_cfg.vpss_regs_base0);
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	release_mem_region(res->start, resource_size(res));
-	if (oper_cfg.platform == DM355 || oper_cfg.platform == DM365) {
-		iounmap(oper_cfg.vpss_regs_base1);
-		res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-		release_mem_region(res->start, resource_size(res));
-	}
-	return 0;
-}
-
-static struct platform_driver vpss_driver = {
-	.driver = {
-		.name	= "vpss",
-		.owner = THIS_MODULE,
-	},
-	.remove = __devexit_p(vpss_remove),
-	.probe = vpss_probe,
-};
-
-static void vpss_exit(void)
-{
-	platform_driver_unregister(&vpss_driver);
-}
-
-static int __init vpss_init(void)
-{
-	return platform_driver_register(&vpss_driver);
-}
-subsys_initcall(vpss_init);
-module_exit(vpss_exit);