summaryrefslogtreecommitdiffstats
path: root/drivers/media/video/em28xx/em28xx-cards.c
diff options
context:
space:
mode:
authorMauro Carvalho Chehab <mchehab@infradead.org>2008-04-17 21:48:00 -0300
committerMauro Carvalho Chehab <mchehab@infradead.org>2008-04-24 14:09:42 -0300
commitc67ec53f8f4e90ebd482789e2f6d121f41a0bd90 (patch)
tree7c5c242cb50e8b1bfdeab4157370c7dbfda34bf9 /drivers/media/video/em28xx/em28xx-cards.c
parent82ac4f876505615ba9dc6a73cd9a584bad8fe23f (diff)
V4L/DVB (7615): em28xx: Provide the proper support for switching between analog/digital
Before this patch, HVR900/HVR950 were incorreclty going back to analog. The result is that only digital were working. This patch provides the proper setup for analog/digital and tuner callback. It also properly resets analog into a sane state at open(). Thanks to Steven Toth <stoth@linuxtv.org> and Michael Krufky <mkrufky@linuxtv.org> for helping to set the proper parameters to GPO/GPIO em2883 ports. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Diffstat (limited to 'drivers/media/video/em28xx/em28xx-cards.c')
-rw-r--r--drivers/media/video/em28xx/em28xx-cards.c81
1 files changed, 34 insertions, 47 deletions
diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c
index ed50b4e5526..13ffde28106 100644
--- a/drivers/media/video/em28xx/em28xx-cards.c
+++ b/drivers/media/video/em28xx/em28xx-cards.c
@@ -436,19 +436,25 @@ MODULE_DEVICE_TABLE(usb, em28xx_id_table);
/* Board Hauppauge WinTV HVR 900 analog */
struct em28xx_reg_seq hauppauge_wintv_hvr_900_analog[] = {
- { -1, -1, 6},
- {EM28XX_R08_GPIO, 0x2d, 10},
- {EM28XX_R08_GPIO, 0x3d, 5},
- { -1, -1, -1},
+ {EM28XX_R08_GPIO, 0x2d, ~EM_GPIO_4, 10},
+ {0x05, 0xff, 0x10, 10},
+ { -1, -1, -1, -1},
};
+
/* Board Hauppauge WinTV HVR 900 digital */
struct em28xx_reg_seq hauppauge_wintv_hvr_900_digital[] = {
- { -1, -1, 6},
- {EM28XX_R08_GPIO, 0x2e, 6},
- {EM28XX_R08_GPIO, 0x3e, 6},
- {EM2880_R04_GPO, 0x04, 10},
- {EM2880_R04_GPO, 0x0c, 10},
- { -1, -1, -1},
+ {EM28XX_R08_GPIO, 0x2e, ~EM_GPIO_4, 10},
+ {EM2880_R04_GPO, 0x04, 0x0f, 10},
+ {EM2880_R04_GPO, 0x0c, 0x0f, 10},
+ { -1, -1, -1, -1},
+};
+
+/* Board Hauppauge WinTV HVR 900 tuner_callback */
+struct em28xx_reg_seq hauppauge_wintv_hvr_900_tuner_callback[] = {
+ {EM28XX_R08_GPIO, EM_GPIO_4, EM_GPIO_4, 10},
+ {EM28XX_R08_GPIO, 0, EM_GPIO_4, 10},
+ {EM28XX_R08_GPIO, EM_GPIO_4, EM_GPIO_4, 10},
+ { -1, -1, -1, -1},
};
/*
@@ -469,7 +475,6 @@ int em28xx_tuner_callback(void *ptr, int command, int arg)
{
int rc = 0;
struct em28xx *dev = ptr;
- struct em28xx_reg_seq *gpio;
if (dev->tuner_type != TUNER_XC2028)
return 0;
@@ -478,32 +483,10 @@ int em28xx_tuner_callback(void *ptr, int command, int arg)
return 0;
if (dev->mode == EM28XX_ANALOG_MODE)
- gpio = dev->analog_gpio;
+ rc = em28xx_gpio_set(dev, dev->tun_analog_gpio);
else
- gpio = dev->digital_gpio;
+ rc = em28xx_gpio_set(dev, dev->tun_digital_gpio);
- /* djh - Not sure if these are still required */
- dev->em28xx_write_regs_req(dev, 0x00, 0x48, "\x00", 1);
- if (dev->mode == EM28XX_ANALOG_MODE)
- dev->em28xx_write_regs_req(dev, 0x00, 0x12, "\x67", 1);
- else
- dev->em28xx_write_regs_req(dev, 0x00, 0x12, "\x37", 1);
- msleep(6);
-
- if (!gpio)
- return rc;
-
- /* Send GPIO reset sequences specified at board entry */
- while (gpio->sleep >= 0) {
- if (gpio->reg >= 0)
- rc = dev->em28xx_write_regs(dev,
- gpio->reg,
- &gpio->val, 1);
- if (gpio->sleep > 0)
- msleep(gpio->sleep);
-
- gpio++;
- }
return rc;
}
EXPORT_SYMBOL_GPL(em28xx_tuner_callback);
@@ -527,6 +510,10 @@ void em28xx_pre_card_setup(struct em28xx *dev)
{
int rc;
+ rc = em28xx_read_reg(dev, EM2880_R04_GPO);
+ if (rc >= 0)
+ dev->reg_gpo = rc;
+
dev->wait_after_write = 5;
rc = em28xx_read_reg(dev, EM28XX_R0A_CHIPID);
if (rc > 0) {
@@ -547,24 +534,24 @@ void em28xx_pre_card_setup(struct em28xx *dev)
case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900:
case EM2880_BOARD_TERRATEC_HYBRID_XS:
case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_950:
- em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x27", 1);
+ em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x27", 1);
em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1);
- em28xx_write_regs(dev, 0x08, "\xff", 1);
- em28xx_write_regs(dev, 0x04, "\x00", 1);
- msleep(100);
- em28xx_write_regs(dev, 0x04, "\x08", 1);
- msleep(100);
- em28xx_write_regs(dev, 0x08, "\xff", 1);
- msleep(50);
- em28xx_write_regs(dev, 0x08, "\x2d", 1);
msleep(50);
- em28xx_write_regs(dev, 0x08, "\x3d", 1);
- dev->analog_gpio = hauppauge_wintv_hvr_900_analog;
- dev->digital_gpio = hauppauge_wintv_hvr_900_digital;
+ /* Sets GPO/GPIO sequences for this device */
+ dev->analog_gpio = hauppauge_wintv_hvr_900_analog;
+ dev->digital_gpio = hauppauge_wintv_hvr_900_digital;
+ dev->tun_analog_gpio = hauppauge_wintv_hvr_900_tuner_callback;
+ dev->tun_digital_gpio = hauppauge_wintv_hvr_900_tuner_callback;
break;
}
+
+ em28xx_gpio_set(dev, dev->tun_analog_gpio);
+ em28xx_set_mode(dev, EM28XX_ANALOG_MODE);
+
+ /* Unlock device */
+ em28xx_set_mode(dev, EM28XX_MODE_UNDEFINED);
}
void em28xx_setup_xc3028(struct em28xx *dev, struct xc2028_ctrl *ctl)