Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (362 commits)
  V4L-DVB: cx88-dvb: remove extra attribution for core
  V4L/DVB: v4l: soc_camera: fix bound checking of mbus_fmt[] index
  V4L/DVB: Add support for SMT7020 to cx88
  V4L/DVB: radio-si470x: Use UTF-8 encoding on a comment
  V4L/DVB: MAINTAINERS: Telegent tlg2300 section fix
  V4L/DVB: gspca_stv06xx: Add support for camera button
  V4L/DVB: gspca_ov519: add support for the button on ov511 based cams
  V4L/DVB: gspca_ov519: Add support for the button on ov518 based cams
  V4L/DVB: gspca_ov519: add support for the button on ov519 based cams
  V4L/DVB: gspca_main: Fix a compile error when CONFIG_INPUT is not set
  V4L/DVB: gspca_main: some input error handling fixes
  V4L/DVB: gspca_main: Allow use of input device creation code for non int. inputs
  V4L/DVB: gspca_pac7302: much improved exposure control
  V4L/DVB: gspca_sonixb: Make sonixb driver handle pas106 and pas202 cameras
  V4L/DVB: gspca_sonixb: pas106: fixup bright ctrl and add gain and exposure ctrls
  V4L/DVB: Documentation: gspca.txt: update known mr97310a cams
  V4L/DVB: gspca_mr97310a: add support for the Sakar 1638x CyberPix
  V4L/DVB: gscpa_sonixb: limit ov7630 max framerate at 640x480
  V4L/DVB: gspca_sonixb: pas202: fixup brightness ctrl and add gain and exposure ctrls
  V4L/DVB: gscpa_sonixb: Differentiate between sensors with a coarse and fine expo ctrl
  ...

1 files changed, 13 insertions, 3 deletions

diff --git a/drivers/media/video/gspca/stv0680.c b/drivers/media/video/gspca/stv0680.c
index 2a69d7ccb50..e50dd7693f7 100644
--- a/drivers/media/video/gspca/stv0680.c
+++ b/drivers/media/video/gspca/stv0680.c
@@ -45,7 +45,7 @@ struct sd {
 };
 
 /* V4L2 controls supported by the driver */
-static struct ctrl sd_ctrls[] = {
+static const struct ctrl sd_ctrls[] = {
 };
 
 static int stv_sndctrl(struct gspca_dev *gspca_dev, int set, u8 req, u16 val,
@@ -53,24 +53,28 @@ static int stv_sndctrl(struct gspca_dev *gspca_dev, int set, u8 req, u16 val,
 {
 	int ret = -1;
 	u8 req_type = 0;
+	unsigned int pipe = 0;
 
 	switch (set) {
 	case 0: /*  0xc1  */
 		req_type = USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_ENDPOINT;
+		pipe = usb_rcvctrlpipe(gspca_dev->dev, 0);
 		break;
 	case 1: /*  0x41  */
 		req_type = USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_ENDPOINT;
+		pipe = usb_sndctrlpipe(gspca_dev->dev, 0);
 		break;
 	case 2:	/*  0x80  */
 		req_type = USB_DIR_IN | USB_RECIP_DEVICE;
+		pipe = usb_rcvctrlpipe(gspca_dev->dev, 0);
 		break;
 	case 3:	/*  0x40  */
 		req_type = USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE;
+		pipe = usb_sndctrlpipe(gspca_dev->dev, 0);
 		break;
 	}
 
-	ret = usb_control_msg(gspca_dev->dev,
-			      usb_rcvctrlpipe(gspca_dev->dev, 0),
+	ret = usb_control_msg(gspca_dev->dev, pipe,
 			      req, req_type,
 			      val, 0, gspca_dev->usb_buf, size, 500);
 
@@ -138,6 +142,10 @@ static int sd_config(struct gspca_dev *gspca_dev,
 	struct sd *sd = (struct sd *) gspca_dev;
 	struct cam *cam = &gspca_dev->cam;
 
+	/* Give the camera some time to settle, otherwise initalization will
+	   fail on hotplug, and yes it really needs a full second. */
+	msleep(1000);
+
 	/* ping camera to be sure STV0680 is present */
 	if (stv_sndctrl(gspca_dev, 0, 0x88, 0x5678, 0x02) != 0x02 ||
 	    gspca_dev->usb_buf[0] != 0x56 || gspca_dev->usb_buf[1] != 0x78) {
@@ -169,6 +177,8 @@ static int sd_config(struct gspca_dev *gspca_dev,
 		PDEBUG(D_PROBE, "Camera supports CIF mode");
 	if (gspca_dev->usb_buf[7] & 0x02)
 		PDEBUG(D_PROBE, "Camera supports VGA mode");
+	if (gspca_dev->usb_buf[7] & 0x04)
+		PDEBUG(D_PROBE, "Camera supports QCIF mode");
 	if (gspca_dev->usb_buf[7] & 0x08)
 		PDEBUG(D_PROBE, "Camera supports QVGA mode");