V4L/DVB (4228a): pvrusb2 to kernel 2.6.18

Implement V4L2 driver for the Hauppauge PVR USB2 TV tuner.

The Hauppauge PVR USB2 is a USB connected TV tuner with an embedded
cx23416 hardware MPEG2 encoder.  There are two major variants of this
device; this driver handles both.  Any V4L2 application which
understands MPEG2 video stream data should be able to work with this
device.

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

1 files changed, 67 insertions, 0 deletions

diff --git a/drivers/media/video/pvrusb2/pvrusb2-debug.h b/drivers/media/video/pvrusb2/pvrusb2-debug.h
new file mode 100644
index 00000000000..d95a8588e4f
--- /dev/null
+++ b/drivers/media/video/pvrusb2/pvrusb2-debug.h
@@ -0,0 +1,67 @@
+/*
+ *  $Id$
+ *
+ *  Copyright (C) 2005 Mike Isely <isely@pobox.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+#ifndef __PVRUSB2_DEBUG_H
+#define __PVRUSB2_DEBUG_H
+
+extern int pvrusb2_debug;
+
+#define pvr2_trace(msk, fmt, arg...) do {if(msk & pvrusb2_debug) printk(KERN_INFO "pvrusb2: " fmt "\n", ##arg); } while (0)
+
+/* These are listed in *rough* order of decreasing usefulness and
+   increasing noise level. */
+#define PVR2_TRACE_INFO       (1 <<  0) // Normal messages
+#define PVR2_TRACE_ERROR_LEGS (1 <<  1) // error messages
+#define PVR2_TRACE_TOLERANCE  (1 <<  2) // track tolerance-affected errors
+#define PVR2_TRACE_TRAP       (1 <<  3) // Trap & report misbehavior from app
+#define PVR2_TRACE_INIT       (1 <<  4) // misc initialization steps
+#define PVR2_TRACE_START_STOP (1 <<  5) // Streaming start / stop
+#define PVR2_TRACE_CTL        (1 <<  6) // commit of control changes
+#define PVR2_TRACE_DEBUG      (1 <<  7) // Temporary debug code
+#define PVR2_TRACE_EEPROM     (1 <<  8) // eeprom parsing / report
+#define PVR2_TRACE_STRUCT     (1 <<  9) // internal struct creation
+#define PVR2_TRACE_OPEN_CLOSE (1 << 10) // application open / close
+#define PVR2_TRACE_CREG       (1 << 11) // Main critical region entry / exit
+#define PVR2_TRACE_SYSFS      (1 << 12) // Sysfs driven I/O
+#define PVR2_TRACE_FIRMWARE   (1 << 13) // firmware upload actions
+#define PVR2_TRACE_CHIPS      (1 << 14) // chip broadcast operation
+#define PVR2_TRACE_I2C        (1 << 15) // I2C related stuff
+#define PVR2_TRACE_I2C_CMD    (1 << 16) // Software commands to I2C modules
+#define PVR2_TRACE_I2C_CORE   (1 << 17) // I2C core debugging
+#define PVR2_TRACE_I2C_TRAF   (1 << 18) // I2C traffic through the adapter
+#define PVR2_TRACE_V4LIOCTL   (1 << 19) // v4l ioctl details
+#define PVR2_TRACE_ENCODER    (1 << 20) // mpeg2 encoder operation
+#define PVR2_TRACE_BUF_POOL   (1 << 21) // Track buffer pool management
+#define PVR2_TRACE_BUF_FLOW   (1 << 22) // Track buffer flow in system
+#define PVR2_TRACE_DATA_FLOW  (1 << 23) // Track data flow
+#define PVR2_TRACE_DEBUGIFC   (1 << 24) // Debug interface actions
+#define PVR2_TRACE_GPIO       (1 << 25) // GPIO state bit changes
+
+
+#endif /* __PVRUSB2_HDW_INTERNAL_H */
+
+/*
+  Stuff for Emacs to see, in order to encourage consistent editing style:
+  *** Local Variables: ***
+  *** mode: c ***
+  *** fill-column: 75 ***
+  *** tab-width: 8 ***
+  *** c-basic-offset: 8 ***
+  *** End: ***
+  */