merge linus into release branch

Conflicts:

	drivers/acpi/acpi_memhotplug.c

1 files changed, 335 insertions, 0 deletions

diff --git a/drivers/media/video/pvrusb2/pvrusb2-hdw.h b/drivers/media/video/pvrusb2/pvrusb2-hdw.h
new file mode 100644
index 00000000000..63f52915443
--- /dev/null
+++ b/drivers/media/video/pvrusb2/pvrusb2-hdw.h
@@ -0,0 +1,335 @@
+/*
+ *
+ *  $Id$
+ *
+ *  Copyright (C) 2005 Mike Isely <isely@pobox.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+#ifndef __PVRUSB2_HDW_H
+#define __PVRUSB2_HDW_H
+
+#include <linux/usb.h>
+#include <linux/videodev2.h>
+#include "pvrusb2-io.h"
+#include "pvrusb2-ctrl.h"
+
+
+/* Private internal control ids, look these up with
+   pvr2_hdw_get_ctrl_by_id() - these are NOT visible in V4L */
+#define PVR2_CID_STDENUM 1
+#define PVR2_CID_STDCUR 2
+#define PVR2_CID_STDAVAIL 3
+#define PVR2_CID_INPUT 4
+#define PVR2_CID_AUDIOMODE 5
+#define PVR2_CID_FREQUENCY 6
+#define PVR2_CID_HRES 7
+#define PVR2_CID_VRES 8
+
+/* Legal values for the INPUT state variable */
+#define PVR2_CVAL_INPUT_TV 0
+#define PVR2_CVAL_INPUT_SVIDEO 1
+#define PVR2_CVAL_INPUT_COMPOSITE 2
+#define PVR2_CVAL_INPUT_RADIO 3
+
+/* Values that pvr2_hdw_get_signal_status() returns */
+#define PVR2_SIGNAL_OK     0x0001
+#define PVR2_SIGNAL_STEREO 0x0002
+#define PVR2_SIGNAL_SAP    0x0004
+
+
+/* Subsystem definitions - these are various pieces that can be
+   independently stopped / started.  Usually you don't want to mess with
+   this directly (let the driver handle things itself), but it is useful
+   for debugging. */
+#define PVR2_SUBSYS_B_ENC_FIRMWARE        0
+#define PVR2_SUBSYS_B_ENC_CFG             1
+#define PVR2_SUBSYS_B_DIGITIZER_RUN       2
+#define PVR2_SUBSYS_B_USBSTREAM_RUN       3
+#define PVR2_SUBSYS_B_ENC_RUN             4
+
+#define PVR2_SUBSYS_CFG_ALL ( \
+	(1 << PVR2_SUBSYS_B_ENC_FIRMWARE) | \
+	(1 << PVR2_SUBSYS_B_ENC_CFG) )
+#define PVR2_SUBSYS_RUN_ALL ( \
+	(1 << PVR2_SUBSYS_B_DIGITIZER_RUN) | \
+	(1 << PVR2_SUBSYS_B_USBSTREAM_RUN) | \
+	(1 << PVR2_SUBSYS_B_ENC_RUN) )
+#define PVR2_SUBSYS_ALL ( \
+	PVR2_SUBSYS_CFG_ALL | \
+	PVR2_SUBSYS_RUN_ALL )
+
+enum pvr2_config {
+	pvr2_config_empty,
+	pvr2_config_mpeg,
+	pvr2_config_vbi,
+	pvr2_config_radio,
+};
+
+const char *pvr2_config_get_name(enum pvr2_config);
+
+struct pvr2_hdw;
+
+/* Create and return a structure for interacting with the underlying
+   hardware */
+struct pvr2_hdw *pvr2_hdw_create(struct usb_interface *intf,
+				 const struct usb_device_id *devid);
+
+/* Poll for background activity (if any) */
+void pvr2_hdw_poll(struct pvr2_hdw *);
+
+/* Trigger a poll to take place later at a convenient time */
+void pvr2_hdw_poll_trigger(struct pvr2_hdw *);
+void pvr2_hdw_poll_trigger_unlocked(struct pvr2_hdw *);
+
+/* Register a callback used to trigger a future poll */
+void pvr2_hdw_setup_poll_trigger(struct pvr2_hdw *,
+				 void (*func)(void *),
+				 void *data);
+
+/* Get pointer to structure given unit number */
+struct pvr2_hdw *pvr2_hdw_find(int unit_number);
+
+/* Destroy hardware interaction structure */
+void pvr2_hdw_destroy(struct pvr2_hdw *);
+
+/* Set up the structure and attempt to put the device into a usable state.
+   This can be a time-consuming operation, which is why it is not done
+   internally as part of the create() step.  Return value is exactly the
+   same as pvr2_hdw_init_ok(). */
+int pvr2_hdw_setup(struct pvr2_hdw *);
+
+/* Initialization succeeded */
+int pvr2_hdw_init_ok(struct pvr2_hdw *);
+
+/* Return true if in the ready (normal) state */
+int pvr2_hdw_dev_ok(struct pvr2_hdw *);
+
+/* Return small integer number [1..N] for logical instance number of this
+   device.  This is useful for indexing array-valued module parameters. */
+int pvr2_hdw_get_unit_number(struct pvr2_hdw *);
+
+/* Get pointer to underlying USB device */
+struct usb_device *pvr2_hdw_get_dev(struct pvr2_hdw *);
+
+/* Retrieve serial number of device */
+unsigned long pvr2_hdw_get_sn(struct pvr2_hdw *);
+
+/* Called when hardware has been unplugged */
+void pvr2_hdw_disconnect(struct pvr2_hdw *);
+
+/* Get the number of defined controls */
+unsigned int pvr2_hdw_get_ctrl_count(struct pvr2_hdw *);
+
+/* Retrieve a control handle given its index (0..count-1) */
+struct pvr2_ctrl *pvr2_hdw_get_ctrl_by_index(struct pvr2_hdw *,unsigned int);
+
+/* Retrieve a control handle given its internal ID (if any) */
+struct pvr2_ctrl *pvr2_hdw_get_ctrl_by_id(struct pvr2_hdw *,unsigned int);
+
+/* Retrieve a control handle given its V4L ID (if any) */
+struct pvr2_ctrl *pvr2_hdw_get_ctrl_v4l(struct pvr2_hdw *,unsigned int ctl_id);
+
+/* Retrieve a control handle given its immediate predecessor V4L ID (if any) */
+struct pvr2_ctrl *pvr2_hdw_get_ctrl_nextv4l(struct pvr2_hdw *,
+					    unsigned int ctl_id);
+
+/* Commit all control changes made up to this point */
+int pvr2_hdw_commit_ctl(struct pvr2_hdw *);
+
+/* Return name for this driver instance */
+const char *pvr2_hdw_get_driver_name(struct pvr2_hdw *);
+
+/* Return PVR2_SIGNAL_XXXX bit mask indicating signal status */
+unsigned int pvr2_hdw_get_signal_status(struct pvr2_hdw *);
+
+/* Query device and see if it thinks it is on a high-speed USB link */
+int pvr2_hdw_is_hsm(struct pvr2_hdw *);
+
+/* Turn streaming on/off */
+int pvr2_hdw_set_streaming(struct pvr2_hdw *,int);
+
+/* Find out if streaming is on */
+int pvr2_hdw_get_streaming(struct pvr2_hdw *);
+
+/* Configure the type of stream to generate */
+int pvr2_hdw_set_stream_type(struct pvr2_hdw *, enum pvr2_config);
+
+/* Get handle to video output stream */
+struct pvr2_stream *pvr2_hdw_get_video_stream(struct pvr2_hdw *);
+
+/* Emit a video standard struct */
+int pvr2_hdw_get_stdenum_value(struct pvr2_hdw *hdw,struct v4l2_standard *std,
+			       unsigned int idx);
+
+/* Enable / disable various pieces of hardware.  Items to change are
+   identified by bit positions within msk, and new state for each item is
+   identified by corresponding bit positions within val. */
+void pvr2_hdw_subsys_bit_chg(struct pvr2_hdw *hdw,
+			     unsigned long msk,unsigned long val);
+
+/* Shortcut for pvr2_hdw_subsys_bit_chg(hdw,msk,msk) */
+void pvr2_hdw_subsys_bit_set(struct pvr2_hdw *hdw,unsigned long msk);
+
+/* Shortcut for pvr2_hdw_subsys_bit_chg(hdw,msk,0) */
+void pvr2_hdw_subsys_bit_clr(struct pvr2_hdw *hdw,unsigned long msk);
+
+/* Retrieve mask indicating which pieces of hardware are currently enabled
+   / configured. */
+unsigned long pvr2_hdw_subsys_get(struct pvr2_hdw *);
+
+/* Adjust mask of what get shut down when streaming is stopped.  This is a
+   debugging aid. */
+void pvr2_hdw_subsys_stream_bit_chg(struct pvr2_hdw *hdw,
+				    unsigned long msk,unsigned long val);
+
+/* Retrieve mask indicating which pieces of hardware are disabled when
+   streaming is turned off. */
+unsigned long pvr2_hdw_subsys_stream_get(struct pvr2_hdw *);
+
+
+/* Enable / disable retrieval of CPU firmware.  This must be enabled before
+   pvr2_hdw_cpufw_get() will function.  Note that doing this may prevent
+   the device from running (and leaving this mode may imply a device
+   reset). */
+void pvr2_hdw_cpufw_set_enabled(struct pvr2_hdw *, int enable_flag);
+
+/* Return true if we're in a mode for retrieval CPU firmware */
+int pvr2_hdw_cpufw_get_enabled(struct pvr2_hdw *);
+
+/* Retrieve a piece of the CPU's firmware at the given offset.  Return
+   value is the number of bytes retrieved or zero if we're past the end or
+   an error otherwise (e.g. if firmware retrieval is not enabled). */
+int pvr2_hdw_cpufw_get(struct pvr2_hdw *,unsigned int offs,
+		       char *buf,unsigned int cnt);
+
+/* Retrieve previously stored v4l minor device number */
+int pvr2_hdw_v4l_get_minor_number(struct pvr2_hdw *);
+
+/* Store the v4l minor device number */
+void pvr2_hdw_v4l_store_minor_number(struct pvr2_hdw *,int);
+
+
+/* The following entry points are all lower level things you normally don't
+   want to worry about. */
+
+/* Attempt to recover from a USB foul-up (in practice I find that if you
+   have to do this, then it's already too late). */
+void pvr2_reset_ctl_endpoints(struct pvr2_hdw *hdw);
+
+/* Issue a command and get a response from the device.  LOTS of higher
+   level stuff is built on this. */
+int pvr2_send_request(struct pvr2_hdw *,
+		      void *write_ptr,unsigned int write_len,
+		      void *read_ptr,unsigned int read_len);
+
+/* Issue a command and get a response from the device.  This extended
+   version includes a probe flag (which if set means that device errors
+   should not be logged or treated as fatal) and a timeout in jiffies.
+   This can be used to non-lethally probe the health of endpoint 1. */
+int pvr2_send_request_ex(struct pvr2_hdw *,unsigned int timeout,int probe_fl,
+			 void *write_ptr,unsigned int write_len,
+			 void *read_ptr,unsigned int read_len);
+
+/* Slightly higher level device communication functions. */
+int pvr2_write_register(struct pvr2_hdw *, u16, u32);
+int pvr2_read_register(struct pvr2_hdw *, u16, u32 *);
+int pvr2_write_u16(struct pvr2_hdw *, u16, int);
+int pvr2_write_u8(struct pvr2_hdw *, u8, int);
+
+/* Call if for any reason we can't talk to the hardware anymore - this will
+   cause the driver to stop flailing on the device. */
+void pvr2_hdw_render_useless(struct pvr2_hdw *);
+void pvr2_hdw_render_useless_unlocked(struct pvr2_hdw *);
+
+/* Set / clear 8051's reset bit */
+void pvr2_hdw_cpureset_assert(struct pvr2_hdw *,int);
+
+/* Execute a USB-commanded device reset */
+void pvr2_hdw_device_reset(struct pvr2_hdw *);
+
+/* Execute hard reset command (after this point it's likely that the
+   encoder will have to be reconfigured).  This also clears the "useless"
+   state. */
+int pvr2_hdw_cmd_deep_reset(struct pvr2_hdw *);
+
+/* Execute simple reset command */
+int pvr2_hdw_cmd_powerup(struct pvr2_hdw *);
+
+/* Order decoder to reset */
+int pvr2_hdw_cmd_decoder_reset(struct pvr2_hdw *);
+
+/* Stop / start video stream transport */
+int pvr2_hdw_cmd_usbstream(struct pvr2_hdw *hdw,int runFl);
+
+/* Find I2C address of eeprom */
+int pvr2_hdw_get_eeprom_addr(struct pvr2_hdw *);
+
+/* Direct manipulation of GPIO bits */
+int pvr2_hdw_gpio_get_dir(struct pvr2_hdw *hdw,u32 *);
+int pvr2_hdw_gpio_get_out(struct pvr2_hdw *hdw,u32 *);
+int pvr2_hdw_gpio_get_in(struct pvr2_hdw *hdw,u32 *);
+int pvr2_hdw_gpio_chg_dir(struct pvr2_hdw *hdw,u32 msk,u32 val);
+int pvr2_hdw_gpio_chg_out(struct pvr2_hdw *hdw,u32 msk,u32 val);
+
+/* This data structure is specifically for the next function... */
+struct pvr2_hdw_debug_info {
+	int big_lock_held;
+	int ctl_lock_held;
+	int flag_ok;
+	int flag_disconnected;
+	int flag_init_ok;
+	int flag_streaming_enabled;
+	unsigned long subsys_flags;
+	int cmd_debug_state;
+	int cmd_debug_write_len;
+	int cmd_debug_read_len;
+	int cmd_debug_write_pend;
+	int cmd_debug_read_pend;
+	int cmd_debug_timeout;
+	int cmd_debug_rstatus;
+	int cmd_debug_wstatus;
+	unsigned char cmd_code;
+};
+
+/* Non-intrusively retrieve internal state info - this is useful for
+   diagnosing lockups.  Note that this operation is completed without any
+   kind of locking and so it is not atomic and may yield inconsistent
+   results.  This is *purely* a debugging aid. */
+void pvr2_hdw_get_debug_info(const struct pvr2_hdw *hdw,
+			     struct pvr2_hdw_debug_info *);
+
+/* Cause modules to log their state once */
+void pvr2_hdw_trigger_module_log(struct pvr2_hdw *hdw);
+
+/* Cause encoder firmware to be uploaded into the device.  This is normally
+   done autonomously, but the interface is exported here because it is also
+   a debugging aid. */
+int pvr2_upload_firmware2(struct pvr2_hdw *hdw);
+
+/* List of device types that we can match */
+extern struct usb_device_id pvr2_device_table[];
+
+#endif /* __PVRUSB2_HDW_H */
+
+/*
+  Stuff for Emacs to see, in order to encourage consistent editing style:
+  *** Local Variables: ***
+  *** mode: c ***
+  *** fill-column: 75 ***
+  *** tab-width: 8 ***
+  *** c-basic-offset: 8 ***
+  *** End: ***
+  */