[media] v4l: s5p-tv: hdmi: fix mode synchronization

The mode setup was applied on HDMI hardware only on resume event.  This caused
problem if HDMI was not suspended between mode switches.  This patch fixes this
problem by setting a dirty flag on a mode change event.  If flag is set, then
new mode is applied on the next stream-on event.

Signed-off-by: Tomasz Stanislawski <t.stanislaws@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

1 files changed, 16 insertions, 4 deletions

diff --git a/drivers/media/video/s5p-tv/hdmi_drv.c b/drivers/media/video/s5p-tv/hdmi_drv.c
index eefb903313c..20cb6eef297 100644
--- a/drivers/media/video/s5p-tv/hdmi_drv.c
+++ b/drivers/media/video/s5p-tv/hdmi_drv.c
@@ -87,6 +87,8 @@ struct hdmi_device {
 	struct v4l2_subdev *mhl_sd;
 	/** configuration of current graphic mode */
 	const struct hdmi_timings *cur_conf;
+	/** flag indicating that timings are dirty */
+	int cur_conf_dirty;
 	/** current preset */
 	u32 cur_preset;
 	/** other resources */
@@ -253,6 +255,10 @@ static int hdmi_conf_apply(struct hdmi_device *hdmi_dev)
 
 	dev_dbg(dev, "%s\n", __func__);
 
+	/* skip if conf is already synchronized with HW */
+	if (!hdmi_dev->cur_conf_dirty)
+		return 0;
+
 	/* reset hdmiphy */
 	hdmi_write_mask(hdmi_dev, HDMI_PHY_RSTOUT, ~0, HDMI_PHY_SW_RSTOUT);
 	mdelay(10);
@@ -278,6 +284,8 @@ static int hdmi_conf_apply(struct hdmi_device *hdmi_dev)
 	/* setting core registers */
 	hdmi_timing_apply(hdmi_dev, conf);
 
+	hdmi_dev->cur_conf_dirty = 0;
+
 	return 0;
 }
 
@@ -500,6 +508,10 @@ static int hdmi_streamon(struct hdmi_device *hdev)
 
 	dev_dbg(dev, "%s\n", __func__);
 
+	ret = hdmi_conf_apply(hdev);
+	if (ret)
+		return ret;
+
 	ret = v4l2_subdev_call(hdev->phy_sd, video, s_stream, 1);
 	if (ret)
 		return ret;
@@ -620,6 +632,7 @@ static int hdmi_s_dv_preset(struct v4l2_subdev *sd,
 		return -EINVAL;
 	}
 	hdev->cur_conf = conf;
+	hdev->cur_conf_dirty = 1;
 	hdev->cur_preset = preset->preset;
 	return 0;
 }
@@ -689,6 +702,8 @@ static int hdmi_runtime_suspend(struct device *dev)
 	dev_dbg(dev, "%s\n", __func__);
 	v4l2_subdev_call(hdev->mhl_sd, core, s_power, 0);
 	hdmi_resource_poweroff(&hdev->res);
+	/* flag that device context is lost */
+	hdev->cur_conf_dirty = 1;
 	return 0;
 }
 
@@ -702,10 +717,6 @@ static int hdmi_runtime_resume(struct device *dev)
 
 	hdmi_resource_poweron(&hdev->res);
 
-	ret = hdmi_conf_apply(hdev);
-	if (ret)
-		goto fail;
-
 	/* starting MHL */
 	ret = v4l2_subdev_call(hdev->mhl_sd, core, s_power, 1);
 	if (hdev->mhl_sd && ret)
@@ -946,6 +957,7 @@ static int __devinit hdmi_probe(struct platform_device *pdev)
 	hdmi_dev->cur_preset = HDMI_DEFAULT_PRESET;
 	/* FIXME: missing fail preset is not supported */
 	hdmi_dev->cur_conf = hdmi_preset2timings(hdmi_dev->cur_preset);
+	hdmi_dev->cur_conf_dirty = 1;
 
 	/* storing subdev for call that have only access to struct device */
 	dev_set_drvdata(dev, sd);