Merge git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb

* git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb: (42 commits)
  V4L/DVB (8108): Fix open/close race in saa7134
  V4L/DVB (8100): V4L/vivi: fix possible memory leak in vivi_fillbuff
  V4L/DVB (8097): xc5000: check device hardware state to determine if firmware download is needed
  V4L/DVB (8096): au8522: prevent false-positive lock status
  V4L/DVB (8092): videodev: simplify and fix standard enumeration
  V4L/DVB (8075): stv0299: Uncorrected block count and bit error rate fixed
  V4L/DVB (8074): av7110: OSD transfers should not be interrupted
  V4L/DVB (8073): av7110: Catch another type of ARM crash
  V4L/DVB (8071): tda10023: Fix possible kernel oops during initialisation
  V4L/DVB (8069): cx18: Fix S-Video and Compsite inputs for the Yuan MPC718 and enable card entry
  V4L/DVB (8068): cx18: Add I2C slave reset via GPIO upon initialization
  V4L/DVB (8067): cx18: Fix firmware load for case when digital capture happens first
  V4L/DVB (8066): cx18: Fix audio mux input definitions for HVR-1600 Line In 2 and FM radio
  V4L/DVB (8063): cx18: Fix unintended auto configurations in cx18-av-core
  V4L/DVB (8061): cx18: only select tuner / frontend modules if !DVB_FE_CUSTOMISE
  V4L/DVB (8048): saa7134: Fix entries for Avermedia A16d and Avermedia E506
  V4L/DVB (8044): au8522: tuning optimizations
  V4L/DVB (8043): au0828: add support for additional USB device id's
  V4L/DVB (8042): DVB-USB UMT-010 channel scan oops
  V4L/DVB (8040): soc-camera: remove soc_camera_host_class class
  ...

1 files changed, 21 insertions, 22 deletions

diff --git a/drivers/media/video/saa7134/saa7134-dvb.c b/drivers/media/video/saa7134/saa7134-dvb.c
index 469f93aac00..341b101b035 100644
--- a/drivers/media/video/saa7134/saa7134-dvb.c
+++ b/drivers/media/video/saa7134/saa7134-dvb.c
@@ -153,12 +153,12 @@ static int mt352_aver777_init(struct dvb_frontend* fe)
 	return 0;
 }
 
-static int mt352_aver_a16d_init(struct dvb_frontend *fe)
+static int mt352_avermedia_xc3028_init(struct dvb_frontend *fe)
 {
-	static u8 clock_config []  = { CLOCK_CTL,  0x38, 0x2d };
-	static u8 reset []         = { RESET,      0x80 };
-	static u8 adc_ctl_1_cfg [] = { ADC_CTL_1,  0x40 };
-	static u8 agc_cfg []       = { AGC_TARGET, 0x28, 0xa0 };
+	static u8 clock_config []  = { CLOCK_CTL, 0x38, 0x2d };
+	static u8 reset []         = { RESET, 0x80 };
+	static u8 adc_ctl_1_cfg [] = { ADC_CTL_1, 0x40 };
+	static u8 agc_cfg []       = { AGC_TARGET, 0xe };
 	static u8 capt_range_cfg[] = { CAPT_RANGE, 0x33 };
 
 	mt352_write(fe, clock_config,   sizeof(clock_config));
@@ -167,12 +167,9 @@ static int mt352_aver_a16d_init(struct dvb_frontend *fe)
 	mt352_write(fe, adc_ctl_1_cfg,  sizeof(adc_ctl_1_cfg));
 	mt352_write(fe, agc_cfg,        sizeof(agc_cfg));
 	mt352_write(fe, capt_range_cfg, sizeof(capt_range_cfg));
-
 	return 0;
 }
 
-
-
 static int mt352_pinnacle_tuner_set_params(struct dvb_frontend* fe,
 					   struct dvb_frontend_parameters* params)
 {
@@ -215,14 +212,10 @@ static struct mt352_config avermedia_777 = {
 	.demod_init    = mt352_aver777_init,
 };
 
-static struct mt352_config avermedia_16d = {
-	.demod_address = 0xf,
-	.demod_init    = mt352_aver_a16d_init,
-};
-
-static struct mt352_config avermedia_e506r_mt352_dev = {
+static struct mt352_config avermedia_xc3028_mt352_dev = {
 	.demod_address   = (0x1e >> 1),
 	.no_tuner        = 1,
+	.demod_init      = mt352_avermedia_xc3028_init,
 };
 
 /* ==================================================================
@@ -975,9 +968,10 @@ static int dvb_init(struct saa7134_dev *dev)
 		}
 		break;
 	case SAA7134_BOARD_AVERMEDIA_A16D:
-		dprintk("avertv A16D dvb setup\n");
-		dev->dvb.frontend = dvb_attach(mt352_attach, &avermedia_16d,
-					       &dev->i2c_adap);
+		dprintk("AverMedia A16D dvb setup\n");
+		dev->dvb.frontend = dvb_attach(mt352_attach,
+						&avermedia_xc3028_mt352_dev,
+						&dev->i2c_adap);
 		attach_xc3028 = 1;
 		break;
 	case SAA7134_BOARD_MD7134:
@@ -1091,7 +1085,8 @@ static int dvb_init(struct saa7134_dev *dev)
 					ads_tech_duo_config.tuner_address);
 				goto dettach_frontend;
 			}
-		}
+		} else
+			wprintk("failed to attach tda10046\n");
 		break;
 	case SAA7134_BOARD_TEVION_DVBT_220RF:
 		if (configure_tda827x_fe(dev, &tevion_dvbt220rf_config,
@@ -1260,11 +1255,14 @@ static int dvb_init(struct saa7134_dev *dev)
 			goto dettach_frontend;
 		break;
 	case SAA7134_BOARD_AVERMEDIA_CARDBUS_506:
+		dprintk("AverMedia E506R dvb setup\n");
+		saa7134_set_gpio(dev, 25, 0);
+		msleep(10);
+		saa7134_set_gpio(dev, 25, 1);
 		dev->dvb.frontend = dvb_attach(mt352_attach,
-					       &avermedia_e506r_mt352_dev,
-					       &dev->i2c_adap);
+						&avermedia_xc3028_mt352_dev,
+						&dev->i2c_adap);
 		attach_xc3028 = 1;
-		break;
 	case SAA7134_BOARD_MD7134_BRIDGE_2:
 		dev->dvb.frontend = dvb_attach(tda10086_attach,
 						&sd1878_4m, &dev->i2c_adap);
@@ -1338,7 +1336,8 @@ static int dvb_init(struct saa7134_dev *dev)
 	return ret;
 
 dettach_frontend:
-	dvb_frontend_detach(dev->dvb.frontend);
+	if (dev->dvb.frontend)
+		dvb_frontend_detach(dev->dvb.frontend);
 	dev->dvb.frontend = NULL;
 
 	return -1;