V4L/DVB (11844): ir-kbd-i2c: Switch to the new-style device binding model

Let card drivers probe for IR receiver devices and instantiate them if
found. Ultimately it would be better if we could stop probing
completely, but I suspect this won't be possible for all card types.

There's certainly room for cleanups. For example, some drivers are
sharing I2C adapter IDs, so they also had to share the list of I2C
addresses being probed for an IR receiver. Now that each driver
explicitly says which addresses should be probed, maybe some addresses
can be dropped from some drivers.

Also, the special cases in saa7134-i2c should probably be handled on a
per-board basis. This would be more efficient and less risky than always
probing extra addresses on all boards. I'll give it a try later.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

3 files changed, 78 insertions, 12 deletions

diff --git a/drivers/media/video/saa7134/saa7134-i2c.c b/drivers/media/video/saa7134/saa7134-i2c.c
index f3e285aa2fb..a96f75985cb 100644
--- a/drivers/media/video/saa7134/saa7134-i2c.c
+++ b/drivers/media/video/saa7134/saa7134-i2c.c
@@ -433,6 +433,9 @@ int saa7134_i2c_register(struct saa7134_dev *dev)
 	saa7134_i2c_eeprom(dev,dev->eedata,sizeof(dev->eedata));
 	if (i2c_scan)
 		do_i2c_scan(dev->name,&dev->i2c_client);
+
+	/* Instantiate the IR receiver device, if present */
+	saa7134_probe_i2c_ir(dev);
 	return 0;
 }
 
diff --git a/drivers/media/video/saa7134/saa7134-input.c b/drivers/media/video/saa7134/saa7134-input.c
index 6cd693d3b8e..4144ca9cc7e 100644
--- a/drivers/media/video/saa7134/saa7134-input.c
+++ b/drivers/media/video/saa7134/saa7134-input.c
@@ -134,10 +134,10 @@ static int get_key_msi_tvanywhere_plus(struct IR_i2c *ir, u32 *ir_key,
 	int gpio;
 
 	/* <dev> is needed to access GPIO. Used by the saa_readl macro. */
-	struct saa7134_dev *dev = ir->c.adapter->algo_data;
+	struct saa7134_dev *dev = ir->c->adapter->algo_data;
 	if (dev == NULL) {
 		dprintk("get_key_msi_tvanywhere_plus: "
-			"gir->c.adapter->algo_data is NULL!\n");
+			"gir->c->adapter->algo_data is NULL!\n");
 		return -EIO;
 	}
 
@@ -156,7 +156,7 @@ static int get_key_msi_tvanywhere_plus(struct IR_i2c *ir, u32 *ir_key,
 
 	/* GPIO says there is a button press. Get it. */
 
-	if (1 != i2c_master_recv(&ir->c, &b, 1)) {
+	if (1 != i2c_master_recv(ir->c, &b, 1)) {
 		i2cdprintk("read error\n");
 		return -EIO;
 	}
@@ -179,7 +179,7 @@ static int get_key_purpletv(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw)
 	unsigned char b;
 
 	/* poll IR chip */
-	if (1 != i2c_master_recv(&ir->c,&b,1)) {
+	if (1 != i2c_master_recv(ir->c, &b, 1)) {
 		i2cdprintk("read error\n");
 		return -EIO;
 	}
@@ -202,7 +202,7 @@ static int get_key_hvr1110(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw)
 	unsigned char buf[5], cod4, code3, code4;
 
 	/* poll IR chip */
-	if (5 != i2c_master_recv(&ir->c,buf,5))
+	if (5 != i2c_master_recv(ir->c, buf, 5))
 		return -EIO;
 
 	cod4	= buf[4];
@@ -224,7 +224,7 @@ static int get_key_beholdm6xx(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw)
 	unsigned char data[12];
 	u32 gpio;
 
-	struct saa7134_dev *dev = ir->c.adapter->algo_data;
+	struct saa7134_dev *dev = ir->c->adapter->algo_data;
 
 	/* rising SAA7134_GPIO_GPRESCAN reads the status */
 	saa_clearb(SAA7134_GPIO_GPMODE3, SAA7134_GPIO_GPRESCAN);
@@ -235,9 +235,9 @@ static int get_key_beholdm6xx(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw)
 	if (0x400000 & ~gpio)
 		return 0; /* No button press */
 
-	ir->c.addr = 0x5a >> 1;
+	ir->c->addr = 0x5a >> 1;
 
-	if (12 != i2c_master_recv(&ir->c, data, 12)) {
+	if (12 != i2c_master_recv(ir->c, data, 12)) {
 		i2cdprintk("read error\n");
 		return -EIO;
 	}
@@ -267,7 +267,7 @@ static int get_key_pinnacle(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw,
 	unsigned int start = 0,parity = 0,code = 0;
 
 	/* poll IR chip */
-	if (4 != i2c_master_recv(&ir->c, b, 4)) {
+	if (4 != i2c_master_recv(ir->c, b, 4)) {
 		i2cdprintk("read error\n");
 		return -EIO;
 	}
@@ -682,14 +682,76 @@ void saa7134_input_fini(struct saa7134_dev *dev)
 	dev->remote = NULL;
 }
 
-void saa7134_set_i2c_ir(struct saa7134_dev *dev, struct IR_i2c *ir)
+void saa7134_probe_i2c_ir(struct saa7134_dev *dev)
 {
+	struct i2c_board_info info;
+	const unsigned short addr_list[] = {
+		0x7a, 0x47, 0x71, 0x2d,
+		I2C_CLIENT_END
+	};
+
+	const unsigned short addr_list_msi[] = {
+		0x30, I2C_CLIENT_END
+	};
+	struct i2c_msg msg_msi = {
+		.addr = 0x50,
+		.flags = I2C_M_RD,
+		.len = 0,
+		.buf = NULL,
+	};
+
+	unsigned char subaddr, data;
+	struct i2c_msg msg_avermedia[] = { {
+		.addr = 0x40,
+		.flags = 0,
+		.len = 1,
+		.buf = &subaddr,
+	}, {
+		.addr = 0x40,
+		.flags = I2C_M_RD,
+		.len = 1,
+		.buf = &data,
+	} };
+
+	struct i2c_client *client;
+	int rc;
+
 	if (disable_ir) {
-		dprintk("Found supported i2c remote, but IR has been disabled\n");
-		ir->get_key=NULL;
+		dprintk("IR has been disabled, not probing for i2c remote\n");
 		return;
 	}
 
+	memset(&info, 0, sizeof(struct i2c_board_info));
+	strlcpy(info.type, "ir_video", I2C_NAME_SIZE);
+	client = i2c_new_probed_device(&dev->i2c_adap, &info, addr_list);
+	if (client)
+		return;
+
+	/* MSI TV@nywhere Plus controller doesn't seem to
+	   respond to probes unless we read something from
+	   an existing device. Weird... */
+	rc = i2c_transfer(&dev->i2c_adap, &msg_msi, 1);
+	dprintk(KERN_DEBUG "probe 0x%02x @ %s: %s\n",
+		msg_msi.addr, dev->i2c_adap.name,
+		(1 == rc) ? "yes" : "no");
+	client = i2c_new_probed_device(&dev->i2c_adap, &info, addr_list_msi);
+	if (client)
+		return;
+
+	/* Special case for AVerMedia Cardbus remote */
+	subaddr = 0x0d;
+	rc = i2c_transfer(&dev->i2c_adap, msg_avermedia, 2);
+	dprintk(KERN_DEBUG "probe 0x%02x/0x%02x @ %s: %s\n",
+		msg_avermedia[0].addr, subaddr, dev->i2c_adap.name,
+		(2 == rc) ? "yes" : "no");
+	if (2 == rc) {
+		info.addr = msg_avermedia[0].addr;
+		i2c_new_device(&dev->i2c_adap, &info);
+	}
+}
+
+void saa7134_set_i2c_ir(struct saa7134_dev *dev, struct IR_i2c *ir)
+{
 	switch (dev->board) {
 	case SAA7134_BOARD_PINNACLE_PCTV_110i:
 	case SAA7134_BOARD_PINNACLE_PCTV_310i:
diff --git a/drivers/media/video/saa7134/saa7134.h b/drivers/media/video/saa7134/saa7134.h
index 8229ab21322..116534ec33e 100644
--- a/drivers/media/video/saa7134/saa7134.h
+++ b/drivers/media/video/saa7134/saa7134.h
@@ -799,6 +799,7 @@ void saa7134_irq_oss_done(struct saa7134_dev *dev, unsigned long status);
 int  saa7134_input_init1(struct saa7134_dev *dev);
 void saa7134_input_fini(struct saa7134_dev *dev);
 void saa7134_input_irq(struct saa7134_dev *dev);
+void saa7134_probe_i2c_ir(struct saa7134_dev *dev);
 void saa7134_set_i2c_ir(struct saa7134_dev *dev, struct IR_i2c *ir);
 void saa7134_ir_start(struct saa7134_dev *dev, struct card_ir *ir);
 void saa7134_ir_stop(struct saa7134_dev *dev);