V4L/DVB (5978): tuner: Better tuner radio support

Add radio support for the Thomson DTT7612 tuner.

This tuner uses a different 1st intermediate frequency than the other radio
tuners supported (a lot of NTSC radio tuners probably need this change too).

Add a new tuner-simple parameter, radio_if.  It selects the 1st IF used for
radio reception.  The radio frequency setting code in tuner-simple now uses
this field, instead of a special case select() block for each tuner with radio
support.

The tuner parameters for tuners that used a 33.3 MHz RIF now set radio_if to 1
in tuner-types.c.

The Thomson DTT7612 gets radio_if = 2, also add has_tda9887 = 1 and
fm_gain_normal = 1.

Add some defines for tda9887 bits that control IF setting in radio mode.

Add a new tda9887 config option, TDA9887_RIF_41_3, that selects a 41.3 MHz
radio IF.

Fix the way tda9887 radio options work.  The driver was modifying the default
radio mode config templates based on the TDA9887_XXXX flags.  This means that
_all_ tuners would get the same settings.  If you had a one tuner than used
TDA9887_GAIN_NORMAL and one that didn't, both would get the setting.  Now the
tda9987 driver just checks if tuner mode is radio and then applies the config
settings directly to the data being sent, just like how all the TV mode
settings already work.

The PLL setting math is made a little more accurate.

And a grammar error in a printk is fixed.

Signed-off-by:  Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

1 files changed, 16 insertions, 3 deletions

diff --git a/drivers/media/video/tda9887.c b/drivers/media/video/tda9887.c
index a8f773274fe..aa311e4f1f6 100644
--- a/drivers/media/video/tda9887.c
+++ b/drivers/media/video/tda9887.c
@@ -97,6 +97,8 @@ struct tvnorm {
 #define cAudioIF_6_5             0x03    // bit e0:1
 
 
+#define cVideoIFMask		0x1c	// bit e2:4
+/* Video IF selection in TV Mode (bit B3=0) */
 #define cVideoIF_58_75           0x00    // bit e2:4
 #define cVideoIF_45_75           0x04    // bit e2:4
 #define cVideoIF_38_90           0x08    // bit e2:4
@@ -106,6 +108,13 @@ struct tvnorm {
 #define cRadioIF_45_75           0x18    // bit e2:4
 #define cRadioIF_38_90           0x1C    // bit e2:4
 
+/* IF1 selection in Radio Mode (bit B3=1) */
+#define cRadioIF_33_30		0x00	// bit e2,4 (also 0x10,0x14)
+#define cRadioIF_41_30		0x04	// bit e2,4
+
+/* Output of AFC pin in radio mode when bit E7=1 */
+#define cRadioAGC_SIF		0x00	// bit e3
+#define cRadioAGC_FM		0x08	// bit e3
 
 #define cTunerGainNormal         0x00    // bit e5
 #define cTunerGainLow            0x20    // bit e5
@@ -487,9 +496,13 @@ static int tda9887_set_config(struct tuner *t, char *buf)
 	if (t->tda9887_config & TDA9887_GATING_18)
 		buf[3] &= ~cGating_36;
 
-	if (t->tda9887_config & TDA9887_GAIN_NORMAL) {
-		radio_stereo.e &= ~cTunerGainLow;
-		radio_mono.e &= ~cTunerGainLow;
+	if (t->mode == V4L2_TUNER_RADIO) {
+		if (t->tda9887_config & TDA9887_RIF_41_3) {
+			buf[3] &= ~cVideoIFMask;
+			buf[3] |= cRadioIF_41_30;
+		}
+		if (t->tda9887_config & TDA9887_GAIN_NORMAL)
+			buf[3] &= ~cTunerGainLow;
 	}
 
 	return 0;