V4L/DVB (3384): Separate tv & radio freqs, fix cb/freq transmit order for tuners that need this.

- Moved MSP_SET_MATRIX to v4l2-common.h
- Fix typos and integer overflows in tea5767.c
- Split old freq field into a tv_freq and a radio_freq. Prevents
  that a radio tuner is initialized with a tv frequency or vice versa.
- When switching to radio mode initialize the tuner with the last
  used radio frequency (this was already done for the TV mode).
  As a result of these changes the tuner module now remembers the
  last set radio and TV frequencies, which is what you would expect
  to happen.
- Move out of range frequencies to the closest valid frequency as per
  v4l2 API spec.
- Fix incorrect initial radio frequency (multiplier is 16000, not 16)
- Add boundary check for out of range frequencies.
- Use new flag to check if the order of the CB and freq. depends on
  the last set frequency. That is needed for some tuners or you can
  get static as a result. The flag is added for those tuners where I know
  that the datasheet indicates that this is necessary.
- For this new check use the last set div value, not the last frequency
  as radio frequencies are always much higher due to the 16000 multiplier.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

1 files changed, 23 insertions, 21 deletions

diff --git a/drivers/media/video/tuner-simple.c b/drivers/media/video/tuner-simple.c
index 3879262cf4c..37977ff4978 100644
--- a/drivers/media/video/tuner-simple.c
+++ b/drivers/media/video/tuner-simple.c
@@ -136,7 +136,7 @@ static void default_set_tv_freq(struct i2c_client *c, unsigned int freq)
 	u8 config, tuneraddr;
 	u16 div;
 	struct tunertype *tun;
-	unsigned char buffer[4];
+	u8 buffer[4];
 	int rc, IFPCoff, i, j;
 
 	tun = &tuners[t->type];
@@ -147,6 +147,11 @@ static void default_set_tv_freq(struct i2c_client *c, unsigned int freq)
 			continue;
 		break;
 	}
+	if (i == tun->params[j].count) {
+		tuner_dbg("TV frequency out of range (%d > %d)",
+				freq, tun->params[j].ranges[i - 1].limit);
+		freq = tun->params[j].ranges[--i].limit;
+	}
 	config = tun->params[j].ranges[i].cb;
 	/*  i == 0 -> VHF_LO  */
 	/*  i == 1 -> VHF_HI  */
@@ -239,20 +244,6 @@ static void default_set_tv_freq(struct i2c_client *c, unsigned int freq)
 		break;
 	}
 
-	/*
-	 * Philips FI1216MK2 remark from specification :
-	 * for channel selection involving band switching, and to ensure
-	 * smooth tuning to the desired channel without causing
-	 * unnecessary charge pump action, it is recommended to consider
-	 * the difference between wanted channel frequency and the
-	 * current channel frequency.  Unnecessary charge pump action
-	 * will result in very low tuning voltage which may drive the
-	 * oscillator to extreme conditions.
-	 *
-	 * Progfou: specification says to send config data before
-	 * frequency in case (wanted frequency < current frequency).
-	 */
-
 	/* IFPCoff = Video Intermediate Frequency - Vif:
 		940  =16*58.75  NTSC/J (Japan)
 		732  =16*45.75  M/N STD
@@ -284,7 +275,7 @@ static void default_set_tv_freq(struct i2c_client *c, unsigned int freq)
 					offset / 16, offset % 16 * 100 / 16,
 					div);
 
-	if (t->type == TUNER_PHILIPS_SECAM && freq < t->freq) {
+	if (tuners[t->type].params->cb_first_if_lower_freq && div < t->last_div) {
 		buffer[0] = tun->params[j].config;
 		buffer[1] = config;
 		buffer[2] = (div>>8) & 0x7f;
@@ -295,6 +286,7 @@ static void default_set_tv_freq(struct i2c_client *c, unsigned int freq)
 		buffer[2] = tun->params[j].config;
 		buffer[3] = config;
 	}
+	t->last_div = div;
 	tuner_dbg("tv 0x%02x 0x%02x 0x%02x 0x%02x\n",
 		  buffer[0],buffer[1],buffer[2],buffer[3]);
 
@@ -337,8 +329,8 @@ static void default_set_radio_freq(struct i2c_client *c, unsigned int freq)
 {
 	struct tunertype *tun;
 	struct tuner *t = i2c_get_clientdata(c);
-	unsigned char buffer[4];
-	unsigned div;
+	u8 buffer[4];
+	u16 div;
 	int rc, j;
 
 	tun = &tuners[t->type];
@@ -374,9 +366,19 @@ static void default_set_radio_freq(struct i2c_client *c, unsigned int freq)
 	}
 	buffer[0] = (div>>8) & 0x7f;
 	buffer[1] = div      & 0xff;
+	if (tuners[t->type].params->cb_first_if_lower_freq && div < t->last_div) {
+		buffer[0] = buffer[2];
+		buffer[1] = buffer[3];
+		buffer[2] = (div>>8) & 0x7f;
+		buffer[3] = div      & 0xff;
+	} else {
+		buffer[0] = (div>>8) & 0x7f;
+		buffer[1] = div      & 0xff;
+	}
 
 	tuner_dbg("radio 0x%02x 0x%02x 0x%02x 0x%02x\n",
 	       buffer[0],buffer[1],buffer[2],buffer[3]);
+	t->last_div = div;
 
 	if (4 != (rc = i2c_master_send(c,buffer,4)))
 		tuner_warn("i2c i/o error: rc == %d (should be 4)\n",rc);
@@ -390,10 +392,10 @@ int default_tuner_init(struct i2c_client *c)
 		   t->type, tuners[t->type].name);
 	strlcpy(c->name, tuners[t->type].name, sizeof(c->name));
 
-	t->tv_freq    = default_set_tv_freq;
-	t->radio_freq = default_set_radio_freq;
+	t->set_tv_freq = default_set_tv_freq;
+	t->set_radio_freq = default_set_radio_freq;
 	t->has_signal = tuner_signal;
-	t->is_stereo  = tuner_stereo;
+	t->is_stereo = tuner_stereo;
 	t->standby = NULL;
 
 	return 0;