ieee1394: merge from Linus

Conflicts: drivers/ieee1394/hosts.c
Patch "lockdep: annotate ieee1394 skb-queue-head locking" was meddling
with patch "ieee1394: fix kerneldoc of hpsb_alloc_host".

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>

40 files changed, 326 insertions, 575 deletions

diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index 6d532f170ce..94d078b77ba 100644
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -145,7 +145,7 @@ config VIDEO_SAA5246A
 
 config VIDEO_SAA5249
 	tristate "SAA5249 Teletext processor"
-	depends on VIDEO_DEV && I2C
+	depends on VIDEO_DEV && I2C && VIDEO_V4L1
 	help
 	  Support for I2C bus based teletext using the SAA5249 chip. At the
 	  moment this is only useful on some European WinTV cards.
@@ -155,7 +155,7 @@ config VIDEO_SAA5249
 
 config TUNER_3036
 	tristate "SAB3036 tuner"
-	depends on VIDEO_DEV && I2C
+	depends on VIDEO_DEV && I2C && VIDEO_V4L1
 	help
 	  Say Y here to include support for Philips SAB3036 compatible tuners.
 	  If in doubt, say N.
@@ -260,7 +260,7 @@ source "drivers/media/video/saa7134/Kconfig"
 
 config VIDEO_MXB
 	tristate "Siemens-Nixdorf 'Multimedia eXtension Board'"
-	depends on PCI && VIDEO_V4L1
+	depends on PCI && VIDEO_V4L1 && I2C
 	select VIDEO_SAA7146_VV
 	select VIDEO_TUNER
 	---help---
@@ -272,7 +272,7 @@ config VIDEO_MXB
 
 config VIDEO_DPC
 	tristate "Philips-Semiconductors 'dpc7146 demonstration board'"
-	depends on PCI && VIDEO_V4L1
+	depends on PCI && VIDEO_V4L1 && I2C
 	select VIDEO_SAA7146_VV
 	select VIDEO_V4L2
 	---help---
@@ -287,7 +287,7 @@ config VIDEO_DPC
 
 config VIDEO_HEXIUM_ORION
 	tristate "Hexium HV-PCI6 and Orion frame grabber"
-	depends on PCI && VIDEO_V4L1
+	depends on PCI && VIDEO_V4L1 && I2C
 	select VIDEO_SAA7146_VV
 	select VIDEO_V4L2
 	---help---
@@ -299,7 +299,7 @@ config VIDEO_HEXIUM_ORION
 
 config VIDEO_HEXIUM_GEMINI
 	tristate "Hexium Gemini frame grabber"
-	depends on PCI && VIDEO_V4L1
+	depends on PCI && VIDEO_V4L1 && I2C
 	select VIDEO_SAA7146_VV
 	select VIDEO_V4L2
 	---help---
@@ -449,18 +449,6 @@ source "drivers/media/video/pvrusb2/Kconfig"
 
 source "drivers/media/video/em28xx/Kconfig"
 
-config USB_DSBR
-	tristate "D-Link USB FM radio support (EXPERIMENTAL)"
-	depends on USB && VIDEO_V4L1 && EXPERIMENTAL
-	---help---
-	  Say Y here if you want to connect this type of radio to your
-	  computer's USB port. Note that the audio is not digital, and
-	  you must connect the line out connector to a sound card or a
-	  set of speakers.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called dsbr100.
-
 source "drivers/media/video/usbvideo/Kconfig"
 
 source "drivers/media/video/et61x251/Kconfig"
diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile
index 353d61cfac1..e82e511f2a7 100644
--- a/drivers/media/video/Makefile
+++ b/drivers/media/video/Makefile
@@ -77,7 +77,6 @@ obj-$(CONFIG_VIDEO_UPD64083) += upd64083.o
 obj-$(CONFIG_VIDEO_CX2341X) += cx2341x.o
 
 obj-$(CONFIG_USB_DABUSB)        += dabusb.o
-obj-$(CONFIG_USB_DSBR)          += dsbr100.o
 obj-$(CONFIG_USB_OV511)         += ov511.o
 obj-$(CONFIG_USB_SE401)         += se401.o
 obj-$(CONFIG_USB_STV680)        += stv680.o
@@ -91,6 +90,7 @@ obj-$(CONFIG_USB_ZC0301)        += zc0301/
 obj-$(CONFIG_USB_IBMCAM)        += usbvideo/
 obj-$(CONFIG_USB_KONICAWC)      += usbvideo/
 obj-$(CONFIG_USB_VICAM)         += usbvideo/
+obj-$(CONFIG_USB_QUICKCAM_MESSENGER)	+= usbvideo/
 
 obj-$(CONFIG_VIDEO_VIVI) += vivi.o
 
diff --git a/drivers/media/video/bt8xx/Kconfig b/drivers/media/video/bt8xx/Kconfig
index 153f6a4a96c..cdcf5565071 100644
--- a/drivers/media/video/bt8xx/Kconfig
+++ b/drivers/media/video/bt8xx/Kconfig
@@ -1,6 +1,6 @@
 config VIDEO_BT848
 	tristate "BT848 Video For Linux"
-	depends on VIDEO_DEV && PCI && I2C && VIDEO_V4L2
+	depends on VIDEO_DEV && PCI && I2C && VIDEO_V4L1
 	select I2C_ALGOBIT
 	select FW_LOADER
 	select VIDEO_BTCX
diff --git a/drivers/media/video/bt8xx/bttv-driver.c b/drivers/media/video/bt8xx/bttv-driver.c
index 5764a89d356..20dff7c316e 100644
--- a/drivers/media/video/bt8xx/bttv-driver.c
+++ b/drivers/media/video/bt8xx/bttv-driver.c
@@ -3923,7 +3923,12 @@ static int __devinit bttv_register_video(struct bttv *btv)
 		goto err;
 	printk(KERN_INFO "bttv%d: registered device video%d\n",
 	       btv->c.nr,btv->video_dev->minor & 0x1f);
-	video_device_create_file(btv->video_dev, &class_device_attr_card);
+	if (class_device_create_file(&btv->video_dev->class_dev,
+				     &class_device_attr_card)<0) {
+		printk(KERN_ERR "bttv%d: class_device_create_file 'card' "
+		       "failed\n", btv->c.nr);
+		goto err;
+	}
 
 	/* vbi */
 	btv->vbi_dev = vdev_init(btv, &bttv_vbi_template, "vbi");
@@ -4287,6 +4292,8 @@ static struct pci_driver bttv_pci_driver = {
 
 static int bttv_init_module(void)
 {
+	int ret;
+
 	bttv_num = 0;
 
 	printk(KERN_INFO "bttv: driver version %d.%d.%d loaded\n",
@@ -4308,7 +4315,11 @@ static int bttv_init_module(void)
 
 	bttv_check_chipset();
 
-	bus_register(&bttv_sub_bus_type);
+	ret = bus_register(&bttv_sub_bus_type);
+	if (ret < 0) {
+		printk(KERN_WARNING "bttv: bus_register error: %d\n", ret);
+		return ret;
+	}
 	return pci_register_driver(&bttv_pci_driver);
 }
 
diff --git a/drivers/media/video/bt8xx/bttv-input.c b/drivers/media/video/bt8xx/bttv-input.c
index b41f81d2372..933d6db09ac 100644
--- a/drivers/media/video/bt8xx/bttv-input.c
+++ b/drivers/media/video/bt8xx/bttv-input.c
@@ -303,6 +303,7 @@ int bttv_input_init(struct bttv *btv)
 		ir->mask_keyup   = 0x010000;
 		ir->polling      = 50; // ms
 		break;
+	case BTTV_BOARD_PV_M4900:
 	case BTTV_BOARD_PV_BT878P_9B:
 	case BTTV_BOARD_PV_BT878P_PLUS:
 		ir_codes         = ir_codes_pixelview;
diff --git a/drivers/media/video/bt8xx/bttv-vbi.c b/drivers/media/video/bt8xx/bttv-vbi.c
index 8c9f0f7cf46..63676e7bd63 100644
--- a/drivers/media/video/bt8xx/bttv-vbi.c
+++ b/drivers/media/video/bt8xx/bttv-vbi.c
@@ -31,11 +31,16 @@
 #include <asm/io.h>
 #include "bttvp.h"
 
-/* Offset from line sync pulse leading edge (0H) in 1 / sampling_rate:
-   bt8x8 /HRESET pulse starts at 0H and has length 64 / fCLKx1 (E|O_VTC
-   HSFMT = 0). VBI_HDELAY (always 0) is an offset from the trailing edge
-   of /HRESET in 1 / fCLKx1, and the sampling_rate tvnorm->Fsc is fCLKx2. */
-#define VBI_OFFSET ((64 + 0) * 2)
+/* Offset from line sync pulse leading edge (0H) to start of VBI capture,
+   in fCLKx2 pixels.  According to the datasheet, VBI capture starts
+   VBI_HDELAY fCLKx1 pixels from the tailing edgeof /HRESET, and /HRESET
+   is 64 fCLKx1 pixels wide.  VBI_HDELAY is set to 0, so this should be
+   (64 + 0) * 2 = 128 fCLKx2 pixels.  But it's not!  The datasheet is
+   Just Plain Wrong.  The real value appears to be different for
+   different revisions of the bt8x8 chips, and to be affected by the
+   horizontal scaling factor.  Experimentally, the value is measured
+   to be about 244.  */
+#define VBI_OFFSET 244
 
 #define VBI_DEFLINES 16
 #define VBI_MAXLINES 32
diff --git a/drivers/media/video/compat_ioctl32.c b/drivers/media/video/compat_ioctl32.c
index 353d02b67c3..b69ee119481 100644
--- a/drivers/media/video/compat_ioctl32.c
+++ b/drivers/media/video/compat_ioctl32.c
@@ -21,7 +21,7 @@
 
 #ifdef CONFIG_COMPAT
 
-
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
 struct video_tuner32 {
 	compat_int_t tuner;
 	char name[32];
@@ -107,6 +107,7 @@ struct video_window32 {
 	compat_caddr_t clips;
 	compat_int_t clipcount;
 };
+#endif
 
 static int native_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 {
@@ -124,6 +125,7 @@ static int native_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 }
 
 
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
 /* You get back everything except the clips... */
 static int put_video_window32(struct video_window *kp, struct video_window32 __user *up)
 {
@@ -138,6 +140,7 @@ static int put_video_window32(struct video_window *kp, struct video_window32 __u
 			return -EFAULT;
 	return 0;
 }
+#endif
 
 struct v4l2_clip32
 {
@@ -490,6 +493,24 @@ static inline int put_v4l2_input(struct v4l2_input *kp, struct v4l2_input __user
 	return 0;
 }
 
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
+struct video_code32
+{
+	char		loadwhat[16];	/* name or tag of file being passed */
+	compat_int_t	datasize;
+	unsigned char	*data;
+};
+
+static inline int microcode32(struct video_code *kp, struct video_code32 __user *up)
+{
+	if(!access_ok(VERIFY_READ, up, sizeof(struct video_code32)) ||
+		copy_from_user(kp->loadwhat, up->loadwhat, sizeof (up->loadwhat)) ||
+		get_user(kp->datasize, &up->datasize) ||
+		copy_from_user(kp->data, up->data, up->datasize))
+			return -EFAULT;
+	return 0;
+}
+
 #define VIDIOCGTUNER32		_IOWR('v',4, struct video_tuner32)
 #define VIDIOCSTUNER32		_IOW('v',5, struct video_tuner32)
 #define VIDIOCGWIN32		_IOR('v',9, struct video_window32)
@@ -498,6 +519,9 @@ static inline int put_v4l2_input(struct v4l2_input *kp, struct v4l2_input __user
 #define VIDIOCSFBUF32		_IOW('v',12, struct video_buffer32)
 #define VIDIOCGFREQ32		_IOR('v',14, u32)
 #define VIDIOCSFREQ32		_IOW('v',15, u32)
+#define VIDIOCSMICROCODE32	_IOW('v',27, struct video_code32)
+
+#endif
 
 /* VIDIOC_ENUMINPUT32 is VIDIOC_ENUMINPUT minus 4 bytes of padding alignement */
 #define VIDIOC_ENUMINPUT32	VIDIOC_ENUMINPUT - _IOC(0, 0, 0, 4)
@@ -519,6 +543,7 @@ static inline int put_v4l2_input(struct v4l2_input *kp, struct v4l2_input __user
 #define VIDIOC_S_INPUT32	_IOWR ('V', 39, compat_int_t)
 #define VIDIOC_TRY_FMT32      	_IOWR ('V', 64, struct v4l2_format32)
 
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
 enum {
 	MaxClips = (~0U-sizeof(struct video_window))/sizeof(struct video_clip)
 };
@@ -583,13 +608,17 @@ static int do_set_window(struct file *file, unsigned int cmd, unsigned long arg)
 
 	return native_ioctl(file, VIDIOCSWIN, (unsigned long)vw);
 }
+#endif
 
 static int do_video_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 {
 	union {
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
 		struct video_tuner vt;
 		struct video_buffer vb;
 		struct video_window vw;
+		struct video_code vc;
+#endif
 		struct v4l2_format v2f;
 		struct v4l2_buffer v2b;
 		struct v4l2_framebuffer v2fb;
@@ -605,6 +634,7 @@ static int do_video_ioctl(struct file *file, unsigned int cmd, unsigned long arg
 
 	/* First, convert the command. */
 	switch(cmd) {
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
 	case VIDIOCGTUNER32: cmd = VIDIOCGTUNER; break;
 	case VIDIOCSTUNER32: cmd = VIDIOCSTUNER; break;
 	case VIDIOCGWIN32: cmd = VIDIOCGWIN; break;
@@ -612,6 +642,8 @@ static int do_video_ioctl(struct file *file, unsigned int cmd, unsigned long arg
 	case VIDIOCSFBUF32: cmd = VIDIOCSFBUF; break;
 	case VIDIOCGFREQ32: cmd = VIDIOCGFREQ; break;
 	case VIDIOCSFREQ32: cmd = VIDIOCSFREQ; break;
+	case VIDIOCSMICROCODE32: cmd = VIDIOCSMICROCODE; break;
+#endif
 	case VIDIOC_G_FMT32: cmd = VIDIOC_G_FMT; break;
 	case VIDIOC_S_FMT32: cmd = VIDIOC_S_FMT; break;
 	case VIDIOC_QUERYBUF32: cmd = VIDIOC_QUERYBUF; break;
@@ -631,6 +663,7 @@ static int do_video_ioctl(struct file *file, unsigned int cmd, unsigned long arg
 	};
 
 	switch(cmd) {
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
 	case VIDIOCSTUNER:
 	case VIDIOCGTUNER:
 		err = get_video_tuner32(&karg.vt, up);
@@ -644,6 +677,7 @@ static int do_video_ioctl(struct file *file, unsigned int cmd, unsigned long arg
 		break;
 
 	case VIDIOCSFREQ:
+#endif
 	case VIDIOC_S_INPUT:
 	case VIDIOC_OVERLAY:
 	case VIDIOC_STREAMON:
@@ -697,14 +731,21 @@ static int do_video_ioctl(struct file *file, unsigned int cmd, unsigned long arg
 		compatible_arg = 0;
 		break;
 
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
 	case VIDIOCGWIN:
 	case VIDIOCGFBUF:
 	case VIDIOCGFREQ:
+#endif
 	case VIDIOC_G_FBUF:
 	case VIDIOC_G_INPUT:
 		compatible_arg = 0;
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
+	case VIDIOCSMICROCODE:
+		err = microcode32(&karg.vc, up);
+		compatible_arg = 0;
+		break;
+#endif
 	};
-
 	if(err)
 		goto out;
 
@@ -719,6 +760,7 @@ static int do_video_ioctl(struct file *file, unsigned int cmd, unsigned long arg
 	}
 	if(err == 0) {
 		switch(cmd) {
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
 		case VIDIOCGTUNER:
 			err = put_video_tuner32(&karg.vt, up);
 			break;
@@ -730,7 +772,7 @@ static int do_video_ioctl(struct file *file, unsigned int cmd, unsigned long arg
 		case VIDIOCGFBUF:
 			err = put_video_buffer32(&karg.vb, up);
 			break;
-
+#endif
 		case VIDIOC_G_FBUF:
 			err = put_v4l2_framebuffer32(&karg.v2fb, up);
 			break;
@@ -768,7 +810,9 @@ static int do_video_ioctl(struct file *file, unsigned int cmd, unsigned long arg
 			err = put_v4l2_input32(&karg.v2i, up);
 			break;
 
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
 		case VIDIOCGFREQ:
+#endif
 		case VIDIOC_G_INPUT:
 			err = put_user(((u32)karg.vx), (u32 __user *)up);
 			break;
@@ -786,6 +830,7 @@ long v4l_compat_ioctl32(struct file *file, unsigned int cmd, unsigned long arg)
 		return ret;
 
 	switch (cmd) {
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
 	case VIDIOCSWIN32:
 		ret = do_set_window(file, cmd, arg);
 		break;
@@ -796,6 +841,7 @@ long v4l_compat_ioctl32(struct file *file, unsigned int cmd, unsigned long arg)
 	case VIDIOCSFBUF32:
 	case VIDIOCGFREQ32:
 	case VIDIOCSFREQ32:
+#endif
 	case VIDIOC_QUERYCAP:
 	case VIDIOC_ENUM_FMT:
 	case VIDIOC_G_FMT32:
@@ -827,6 +873,7 @@ long v4l_compat_ioctl32(struct file *file, unsigned int cmd, unsigned long arg)
 		ret = do_video_ioctl(file, cmd, arg);
 		break;
 
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
 	/* Little v, the video4linux ioctls (conflict?) */
 	case VIDIOCGCAP:
 	case VIDIOCGCHAN:
@@ -855,6 +902,7 @@ long v4l_compat_ioctl32(struct file *file, unsigned int cmd, unsigned long arg)
 	case _IOR('v' , BASE_VIDIOCPRIVATE+7, int):
 		ret = native_ioctl(file, cmd, (unsigned long)compat_ptr(arg));
 		break;
+#endif
 	default:
 		v4l_print_ioctl("compat_ioctl32", cmd);
 	}
diff --git a/drivers/media/video/cpia2/Kconfig b/drivers/media/video/cpia2/Kconfig
index 513cc092738..e39a9615200 100644
--- a/drivers/media/video/cpia2/Kconfig
+++ b/drivers/media/video/cpia2/Kconfig
@@ -1,6 +1,6 @@
 config VIDEO_CPIA2
 	tristate "CPiA2 Video For Linux"
-	depends on VIDEO_DEV && USB
+	depends on VIDEO_DEV && USB && VIDEO_V4L1
 	---help---
 	  This is the video4linux driver for cameras based on Vision's CPiA2
 	  (Colour Processor Interface ASIC), such as the Digital Blue QX5
diff --git a/drivers/media/video/cx25840/cx25840-core.c b/drivers/media/video/cx25840/cx25840-core.c
index 5c2036b40ea..7bb7589a07c 100644
--- a/drivers/media/video/cx25840/cx25840-core.c
+++ b/drivers/media/video/cx25840/cx25840-core.c
@@ -104,8 +104,8 @@ u32 cx25840_read4(struct i2c_client * client, u16 addr)
 	if (i2c_master_recv(client, buffer, 4) < 4)
 		return 0;
 
-	return (buffer[0] << 24) | (buffer[1] << 16) |
-	    (buffer[2] << 8) | buffer[3];
+	return (buffer[3] << 24) | (buffer[2] << 16) |
+	    (buffer[1] << 8) | buffer[0];
 }
 
 int cx25840_and_or(struct i2c_client *client, u16 addr, unsigned and_mask,
diff --git a/drivers/media/video/cx88/Kconfig b/drivers/media/video/cx88/Kconfig
index 80e23ee9801..7a94e6a1192 100644
--- a/drivers/media/video/cx88/Kconfig
+++ b/drivers/media/video/cx88/Kconfig
@@ -51,6 +51,7 @@ config VIDEO_CX88_DVB
 	tristate "DVB/ATSC Support for cx2388x based TV cards"
 	depends on VIDEO_CX88 && DVB_CORE
 	select VIDEO_BUF_DVB
+	select DVB_PLL
 	---help---
 	  This adds support for DVB/ATSC cards based on the
 	  Conexant 2388x chip.
diff --git a/drivers/media/video/cx88/cx88-blackbird.c b/drivers/media/video/cx88/cx88-blackbird.c
index 349632b48e9..b60177f173c 100644
--- a/drivers/media/video/cx88/cx88-blackbird.c
+++ b/drivers/media/video/cx88/cx88-blackbird.c
@@ -453,11 +453,13 @@ static int blackbird_load_firmware(struct cx8802_dev *dev)
 	if (firmware->size != BLACKBIRD_FIRM_IMAGE_SIZE) {
 		dprintk(0, "ERROR: Firmware size mismatch (have %zd, expected %d)\n",
 			firmware->size, BLACKBIRD_FIRM_IMAGE_SIZE);
+		release_firmware(firmware);
 		return -1;
 	}
 
 	if (0 != memcmp(firmware->data, magic, 8)) {
 		dprintk(0, "ERROR: Firmware magic mismatch, wrong file?\n");
+		release_firmware(firmware);
 		return -1;
 	}
 
@@ -478,6 +480,7 @@ static int blackbird_load_firmware(struct cx8802_dev *dev)
 	}
 	if (checksum) {
 		dprintk(0, "ERROR: Firmware load failed (checksum mismatch).\n");
+		release_firmware(firmware);
 		return -1;
 	}
 	release_firmware(firmware);
diff --git a/drivers/media/video/cx88/cx88-input.c b/drivers/media/video/cx88/cx88-input.c
index 72b630a91f4..c2556464899 100644
--- a/drivers/media/video/cx88/cx88-input.c
+++ b/drivers/media/video/cx88/cx88-input.c
@@ -89,7 +89,7 @@ static void cx88_ir_handle_key(struct cx88_IR *ir)
 
 		auxgpio = cx_read(MO_GP1_IO);
 		/* Take out the parity part */
-		gpio+=(gpio & 0x7fd) + (auxgpio & 0xef);
+		gpio=(gpio & 0x7fd) + (auxgpio & 0xef);
 	} else
 		auxgpio = gpio;
 
diff --git a/drivers/media/video/cx88/cx88-video.c b/drivers/media/video/cx88/cx88-video.c
index 2225d4b9414..94c92bacc34 100644
--- a/drivers/media/video/cx88/cx88-video.c
+++ b/drivers/media/video/cx88/cx88-video.c
@@ -1180,7 +1180,6 @@ static int video_do_ioctl(struct inode *inode, struct file *file,
 			V4L2_CAP_READWRITE     |
 			V4L2_CAP_STREAMING     |
 			V4L2_CAP_VBI_CAPTURE   |
-			V4L2_CAP_VIDEO_OVERLAY |
 			0;
 		if (UNSET != core->tuner_type)
 			cap->capabilities |= V4L2_CAP_TUNER;
@@ -1226,7 +1225,7 @@ static int video_do_ioctl(struct inode *inode, struct file *file,
 		struct v4l2_format *f = arg;
 		return cx8800_try_fmt(dev,fh,f);
 	}
-#ifdef HAVE_V4L1
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
 	/* --- streaming capture ------------------------------------- */
 	case VIDIOCGMBUF:
 	{
@@ -1585,7 +1584,7 @@ static int radio_do_ioctl(struct inode *inode, struct file *file,
 		*id = 0;
 		return 0;
 	}
-#ifdef HAVE_V4L1
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
 	case VIDIOCSTUNER:
 	{
 		struct video_tuner *v = arg;
diff --git a/drivers/media/video/dsbr100.c b/drivers/media/video/dsbr100.c
deleted file mode 100644
index f7e33f9ee8e..00000000000
--- a/drivers/media/video/dsbr100.c
+++ /dev/null
@@ -1,430 +0,0 @@
-/* A driver for the D-Link DSB-R100 USB radio.  The R100 plugs
- into both the USB and an analog audio input, so this thing
- only deals with initialisation and frequency setting, the
- audio data has to be handled by a sound driver.
-
- Major issue: I can't find out where the device reports the signal
- strength, and indeed the windows software appearantly just looks
- at the stereo indicator as well.  So, scanning will only find
- stereo stations.  Sad, but I can't help it.
-
- Also, the windows program sends oodles of messages over to the
- device, and I couldn't figure out their meaning.  My suspicion
- is that they don't have any:-)
-
- You might find some interesting stuff about this module at
- http://unimut.fsk.uni-heidelberg.de/unimut/demi/dsbr
-
- Copyright (c) 2000 Markus Demleitner <msdemlei@cl.uni-heidelberg.de>
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-
- History:
-
- Version 0.40:
-  Markus: Updates for 2.6.x kernels, code layout changes, name sanitizing
-
- Version 0.30:
-	Markus: Updates for 2.5.x kernel and more ISO compliant source
-
- Version 0.25:
-	PSL and Markus: Cleanup, radio now doesn't stop on device close
-
- Version 0.24:
-	Markus: Hope I got these silly VIDEO_TUNER_LOW issues finally
-	right.  Some minor cleanup, improved standalone compilation
-
- Version 0.23:
-	Markus: Sign extension bug fixed by declaring transfer_buffer unsigned
-
- Version 0.22:
-	Markus: Some (brown bag) cleanup in what VIDIOCSTUNER returns,
-	thanks to Mike Cox for pointing the problem out.
-
- Version 0.21:
-	Markus: Minor cleanup, warnings if something goes wrong, lame attempt
-	to adhere to Documentation/CodingStyle
-
- Version 0.2:
-	Brad Hards <bradh@dynamite.com.au>: Fixes to make it work as non-module
-	Markus: Copyright clarification
-
- Version 0.01: Markus: initial release
-
-*/
-
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/input.h>
-#include <linux/videodev.h>
-#include <media/v4l2-common.h>
-#include <linux/usb.h>
-#include <linux/smp_lock.h>
-
-/*
- * Version Information
- */
-#define DRIVER_VERSION "v0.40"
-#define DRIVER_AUTHOR "Markus Demleitner <msdemlei@tucana.harvard.edu>"
-#define DRIVER_DESC "D-Link DSB-R100 USB FM radio driver"
-
-#define DSB100_VENDOR 0x04b4
-#define DSB100_PRODUCT 0x1002
-
-/* Commands the device appears to understand */
-#define DSB100_TUNE 1
-#define DSB100_ONOFF 2
-
-#define TB_LEN 16
-
-/* Frequency limits in MHz -- these are European values.  For Japanese
-devices, that would be 76 and 91.  */
-#define FREQ_MIN  87.5
-#define FREQ_MAX 108.0
-#define FREQ_MUL 16000
-
-
-static int usb_dsbr100_probe(struct usb_interface *intf,
-			     const struct usb_device_id *id);
-static void usb_dsbr100_disconnect(struct usb_interface *intf);
-static int usb_dsbr100_ioctl(struct inode *inode, struct file *file,
-			     unsigned int cmd, unsigned long arg);
-static int usb_dsbr100_open(struct inode *inode, struct file *file);
-static int usb_dsbr100_close(struct inode *inode, struct file *file);
-
-static int radio_nr = -1;
-module_param(radio_nr, int, 0);
-
-/* Data for one (physical) device */
-typedef struct {
-	struct usb_device *usbdev;
-	struct video_device *videodev;
-	unsigned char transfer_buffer[TB_LEN];
-	int curfreq;
-	int stereo;
-	int users;
-	int removed;
-} dsbr100_device;
-
-
-/* File system interface */
-static struct file_operations usb_dsbr100_fops = {
-	.owner =	THIS_MODULE,
-	.open =		usb_dsbr100_open,
-	.release =     	usb_dsbr100_close,
-	.ioctl =        usb_dsbr100_ioctl,
-	.compat_ioctl = v4l_compat_ioctl32,
-	.llseek =       no_llseek,
-};
-
-/* V4L interface */
-static struct video_device dsbr100_videodev_template=
-{
-	.owner =	THIS_MODULE,
-	.name =		"D-Link DSB-R 100",
-	.type =		VID_TYPE_TUNER,
-	.hardware =	VID_HARDWARE_AZTECH,
-	.fops =         &usb_dsbr100_fops,
-	.release = video_device_release,
-};
-
-static struct usb_device_id usb_dsbr100_device_table [] = {
-	{ USB_DEVICE(DSB100_VENDOR, DSB100_PRODUCT) },
-	{ }						/* Terminating entry */
-};
-
-MODULE_DEVICE_TABLE (usb, usb_dsbr100_device_table);
-
-/* USB subsystem interface */
-static struct usb_driver usb_dsbr100_driver = {
-	.name =		"dsbr100",
-	.probe =	usb_dsbr100_probe,
-	.disconnect =	usb_dsbr100_disconnect,
-	.id_table =	usb_dsbr100_device_table,
-};
-
-/* Low-level device interface begins here */
-
-/* switch on radio */
-static int dsbr100_start(dsbr100_device *radio)
-{
-	if (usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0),
-			USB_REQ_GET_STATUS,
-			USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
-			0x00, 0xC7, radio->transfer_buffer, 8, 300)<0 ||
-	usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0),
-			DSB100_ONOFF,
-			USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
-			0x01, 0x00, radio->transfer_buffer, 8, 300)<0)
-		return -1;
-	return (radio->transfer_buffer)[0];
-}
-
-
-/* switch off radio */
-static int dsbr100_stop(dsbr100_device *radio)
-{
-	if (usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0),
-			USB_REQ_GET_STATUS,
-			USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
-			0x16, 0x1C, radio->transfer_buffer, 8, 300)<0 ||
-	usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0),
-			DSB100_ONOFF,
-			USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
-			0x00, 0x00, radio->transfer_buffer, 8, 300)<0)
-		return -1;
-	return (radio->transfer_buffer)[0];
-}
-
-/* set a frequency, freq is defined by v4l's TUNER_LOW, i.e. 1/16th kHz */
-static int dsbr100_setfreq(dsbr100_device *radio, int freq)
-{
-	freq = (freq/16*80)/1000+856;
-	if (usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0),
-			DSB100_TUNE,
-			USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
-			(freq>>8)&0x00ff, freq&0xff,
-			radio->transfer_buffer, 8, 300)<0 ||
-	   usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0),
-			USB_REQ_GET_STATUS,
-			USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
-			0x96, 0xB7, radio->transfer_buffer, 8, 300)<0 ||
-	usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0),
-			USB_REQ_GET_STATUS,
-			USB_TYPE_VENDOR | USB_RECIP_DEVICE |  USB_DIR_IN,
-			0x00, 0x24, radio->transfer_buffer, 8, 300)<0) {
-		radio->stereo = -1;
-		return -1;
-	}
-	radio->stereo = ! ((radio->transfer_buffer)[0]&0x01);
-	return (radio->transfer_buffer)[0];
-}
-
-/* return the device status.  This is, in effect, just whether it
-sees a stereo signal or not.  Pity. */
-static void dsbr100_getstat(dsbr100_device *radio)
-{
-	if (usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0),
-		USB_REQ_GET_STATUS,
-		USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
-		0x00 , 0x24, radio->transfer_buffer, 8, 300)<0)
-		radio->stereo = -1;
-	else
-		radio->stereo = ! (radio->transfer_buffer[0]&0x01);
-}
-
-
-/* USB subsystem interface begins here */
-
-/* check if the device is present and register with v4l and
-usb if it is */
-static int usb_dsbr100_probe(struct usb_interface *intf,
-			 const struct usb_device_id *id)
-{
-	dsbr100_device *radio;
-
-	if (!(radio = kmalloc(sizeof(dsbr100_device), GFP_KERNEL)))
-		return -ENOMEM;
-	if (!(radio->videodev = video_device_alloc())) {
-		kfree(radio);
-		return -ENOMEM;
-	}
-	memcpy(radio->videodev, &dsbr100_videodev_template,
-		sizeof(dsbr100_videodev_template));
-	radio->removed = 0;
-	radio->users = 0;
-	radio->usbdev = interface_to_usbdev(intf);
-	radio->curfreq = FREQ_MIN*FREQ_MUL;
-	video_set_drvdata(radio->videodev, radio);
-	if (video_register_device(radio->videodev, VFL_TYPE_RADIO,
-		radio_nr)) {
-		warn("Could not register video device");
-		video_device_release(radio->videodev);
-		kfree(radio);
-		return -EIO;
-	}
-	usb_set_intfdata(intf, radio);
-	return 0;
-}
-
-/* handle unplugging of the device, release data structures
-if nothing keeps us from doing it.  If something is still
-keeping us busy, the release callback of v4l will take care
-of releasing it.  stv680.c does not relase its private
-data, so I don't do this here either.  Checking out the
-code I'd expect I better did that, but if there's a memory
-leak here it's tiny (~50 bytes per disconnect) */
-static void usb_dsbr100_disconnect(struct usb_interface *intf)
-{
-	dsbr100_device *radio = usb_get_intfdata(intf);
-
-	usb_set_intfdata (intf, NULL);
-	if (radio) {
-		video_unregister_device(radio->videodev);
-		radio->videodev = NULL;
-		if (radio->users) {
-			kfree(radio);
-		} else {
-			radio->removed = 1;
-		}
-	}
-}
-
-
-/* Video for Linux interface */
-
-static int usb_dsbr100_do_ioctl(struct inode *inode, struct file *file,
-				unsigned int cmd, void *arg)
-{
-	dsbr100_device *radio=video_get_drvdata(video_devdata(file));
-
-	if (!radio)
-		return -EIO;
-
-	switch(cmd) {
-		case VIDIOCGCAP: {
-			struct video_capability *v = arg;
-
-			memset(v, 0, sizeof(*v));
-			v->type = VID_TYPE_TUNER;
-			v->channels = 1;
-			v->audios = 1;
-			strcpy(v->name, "D-Link R-100 USB FM Radio");
-			return 0;
-		}
-		case VIDIOCGTUNER: {
-			struct video_tuner *v = arg;
-
-			dsbr100_getstat(radio);
-			if(v->tuner)	/* Only 1 tuner */
-				return -EINVAL;
-			v->rangelow = FREQ_MIN*FREQ_MUL;
-			v->rangehigh = FREQ_MAX*FREQ_MUL;
-			v->flags = VIDEO_TUNER_LOW;
-			v->mode = VIDEO_MODE_AUTO;
-			v->signal = radio->stereo*0x7000;
-				/* Don't know how to get signal strength */
-			v->flags |= VIDEO_TUNER_STEREO_ON*radio->stereo;
-			strcpy(v->name, "DSB R-100");
-			return 0;
-		}
-		case VIDIOCSTUNER: {
-			struct video_tuner *v = arg;
-
-			if(v->tuner!=0)
-				return -EINVAL;
-			/* Only 1 tuner so no setting needed ! */
-			return 0;
-		}
-		case VIDIOCGFREQ: {
-			int *freq = arg;
-
-			if (radio->curfreq==-1)
-				return -EINVAL;
-			*freq = radio->curfreq;
-			return 0;
-		}
-		case VIDIOCSFREQ: {
-			int *freq = arg;
-
-			radio->curfreq = *freq;
-			if (dsbr100_setfreq(radio, radio->curfreq)==-1)
-				warn("Set frequency failed");
-			return 0;
-		}
-		case VIDIOCGAUDIO: {
-			struct video_audio *v = arg;
-
-			memset(v, 0, sizeof(*v));
-			v->flags |= VIDEO_AUDIO_MUTABLE;
-			v->mode = VIDEO_SOUND_STEREO;
-			v->volume = 1;
-			v->step = 1;
-			strcpy(v->name, "Radio");
-			return 0;
-		}
-		case VIDIOCSAUDIO: {
-			struct video_audio *v = arg;
-
-			if (v->audio)
-				return -EINVAL;
-			if (v->flags&VIDEO_AUDIO_MUTE) {
-				if (dsbr100_stop(radio)==-1)
-					warn("Radio did not respond properly");
-			}
-			else
-				if (dsbr100_start(radio)==-1)
-					warn("Radio did not respond properly");
-			return 0;
-		}
-		default:
-			return -ENOIOCTLCMD;
-	}
-}
-
-static int usb_dsbr100_ioctl(struct inode *inode, struct file *file,
-			     unsigned int cmd, unsigned long arg)
-{
-	return video_usercopy(inode, file, cmd, arg, usb_dsbr100_do_ioctl);
-}
-
-static int usb_dsbr100_open(struct inode *inode, struct file *file)
-{
-	dsbr100_device *radio=video_get_drvdata(video_devdata(file));
-
-	radio->users = 1;
-	if (dsbr100_start(radio)<0) {
-		warn("Radio did not start up properly");
-		radio->users = 0;
-		return -EIO;
-	}
-	dsbr100_setfreq(radio, radio->curfreq);
-	return 0;
-}
-
-static int usb_dsbr100_close(struct inode *inode, struct file *file)
-{
-	dsbr100_device *radio=video_get_drvdata(video_devdata(file));
-
-	if (!radio)
-		return -ENODEV;
-	radio->users = 0;
-	if (radio->removed) {
-		kfree(radio);
-	}
-	return 0;
-}
-
-static int __init dsbr100_init(void)
-{
-	int retval = usb_register(&usb_dsbr100_driver);
-	info(DRIVER_VERSION ":" DRIVER_DESC);
-	return retval;
-}
-
-static void __exit dsbr100_exit(void)
-{
-	usb_deregister(&usb_dsbr100_driver);
-}
-
-module_init (dsbr100_init);
-module_exit (dsbr100_exit);
-
-MODULE_AUTHOR( DRIVER_AUTHOR );
-MODULE_DESCRIPTION( DRIVER_DESC );
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/video/msp3400-driver.c b/drivers/media/video/msp3400-driver.c
index dbb75a7db19..56246b8578f 100644
--- a/drivers/media/video/msp3400-driver.c
+++ b/drivers/media/video/msp3400-driver.c
@@ -362,7 +362,7 @@ int msp_sleep(struct msp_state *state, int timeout)
 }
 
 /* ------------------------------------------------------------------------ */
-
+#ifdef CONFIG_VIDEO_V4L1
 static int msp_mode_v4l2_to_v4l1(int rxsubchans, int audmode)
 {
 	if (rxsubchans == V4L2_TUNER_SUB_MONO)
@@ -384,6 +384,7 @@ static int msp_mode_v4l1_to_v4l2(int mode)
 		return V4L2_TUNER_MODE_LANG1;
 	return V4L2_TUNER_MODE_MONO;
 }
+#endif
 
 static int msp_get_ctrl(struct i2c_client *client, struct v4l2_control *ctrl)
 {
@@ -509,6 +510,7 @@ static int msp_command(struct i2c_client *client, unsigned int cmd, void *arg)
 	/* --- v4l ioctls --- */
 	/* take care: bttv does userspace copying, we'll get a
 	   kernel pointer here... */
+#ifdef CONFIG_VIDEO_V4L1
 	case VIDIOCGAUDIO:
 	{
 		struct video_audio *va = arg;
@@ -577,6 +579,12 @@ static int msp_command(struct i2c_client *client, unsigned int cmd, void *arg)
 	}
 
 	case VIDIOCSFREQ:
+	{
+		/* new channel -- kick audio carrier scan */
+		msp_wake_thread(client);
+		break;
+	}
+#endif
 	case VIDIOC_S_FREQUENCY:
 	{
 		/* new channel -- kick audio carrier scan */
diff --git a/drivers/media/video/msp3400-kthreads.c b/drivers/media/video/msp3400-kthreads.c
index f2fd9195b3a..ed02ff81138 100644
--- a/drivers/media/video/msp3400-kthreads.c
+++ b/drivers/media/video/msp3400-kthreads.c
@@ -961,10 +961,10 @@ int msp34xxg_thread(void *data)
 		/* setup the chip*/
 		msp34xxg_reset(client);
 		state->std = state->radio ? 0x40 : msp_standard;
-		if (state->std != 1)
-			goto unmute;
 		/* start autodetect */
 		msp_write_dem(client, 0x20, state->std);
+		if (state->std != 1)
+			goto unmute;
 
 		/* watch autodetect */
 		v4l_dbg(1, msp_debug, client, "started autodetect, waiting for result\n");
diff --git a/drivers/media/video/pvrusb2/pvrusb2-hdw.c b/drivers/media/video/pvrusb2/pvrusb2-hdw.c
index 9b48abcf608..be1e5cc7808 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-hdw.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-hdw.c
@@ -852,7 +852,6 @@ unsigned long pvr2_hdw_get_sn(struct pvr2_hdw *hdw)
 	return hdw->serial_number;
 }
 
-
 int pvr2_hdw_get_unit_number(struct pvr2_hdw *hdw)
 {
 	return hdw->unit_number;
@@ -2318,7 +2317,6 @@ void pvr2_hdw_poll_trigger_unlocked(struct pvr2_hdw *hdw)
 	}
 }
 
-
 /* Return name for this driver instance */
 const char *pvr2_hdw_get_driver_name(struct pvr2_hdw *hdw)
 {
@@ -2542,6 +2540,10 @@ static void pvr2_ctl_timeout(unsigned long data)
 }
 
 
+/* Issue a command and get a response from the device.  This extended
+   version includes a probe flag (which if set means that device errors
+   should not be logged or treated as fatal) and a timeout in jiffies.
+   This can be used to non-lethally probe the health of endpoint 1. */
 static int pvr2_send_request_ex(struct pvr2_hdw *hdw,
 				unsigned int timeout,int probe_fl,
 				void *write_data,unsigned int write_len,
@@ -2970,6 +2972,7 @@ int pvr2_hdw_cmd_decoder_reset(struct pvr2_hdw *hdw)
 }
 
 
+/* Stop / start video stream transport */
 static int pvr2_hdw_cmd_usbstream(struct pvr2_hdw *hdw,int runFl)
 {
 	int status;
@@ -3068,6 +3071,7 @@ int pvr2_hdw_gpio_chg_out(struct pvr2_hdw *hdw,u32 msk,u32 val)
 }
 
 
+/* Find I2C address of eeprom */
 static int pvr2_hdw_get_eeprom_addr(struct pvr2_hdw *hdw)
 {
 	int result;
diff --git a/drivers/media/video/pvrusb2/pvrusb2-io.c b/drivers/media/video/pvrusb2/pvrusb2-io.c
index 681f79c8064..1e393762546 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-io.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-io.c
@@ -26,6 +26,8 @@
 #include <linux/slab.h>
 #include <linux/mutex.h>
 
+static const char *pvr2_buffer_state_decode(enum pvr2_buffer_state);
+
 #define BUFFER_SIG 0x47653271
 
 // #define SANITY_CHECK_BUFFERS
@@ -515,6 +517,10 @@ void pvr2_stream_set_callback(struct pvr2_stream *sp,
 }
 
 /* Query / set the nominal buffer count */
+int pvr2_stream_get_buffer_count(struct pvr2_stream *sp)
+{
+	return sp->buffer_target_count;
+}
 
 int pvr2_stream_set_buffer_count(struct pvr2_stream *sp,unsigned int cnt)
 {
@@ -553,7 +559,6 @@ int pvr2_stream_get_ready_count(struct pvr2_stream *sp)
 	return sp->r_count;
 }
 
-
 void pvr2_stream_kill(struct pvr2_stream *sp)
 {
 	struct pvr2_buffer *bp;
@@ -607,7 +612,6 @@ int pvr2_buffer_queue(struct pvr2_buffer *bp)
 	return ret;
 }
 
-
 int pvr2_buffer_set_buffer(struct pvr2_buffer *bp,void *ptr,unsigned int cnt)
 {
 	int ret = 0;
@@ -646,7 +650,6 @@ int pvr2_buffer_get_status(struct pvr2_buffer *bp)
 	return bp->status;
 }
 
-
 int pvr2_buffer_get_id(struct pvr2_buffer *bp)
 {
 	return bp->id;
diff --git a/drivers/media/video/pvrusb2/pvrusb2-io.h b/drivers/media/video/pvrusb2/pvrusb2-io.h
index 96285ad234a..93279cc2a35 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-io.h
+++ b/drivers/media/video/pvrusb2/pvrusb2-io.h
@@ -47,6 +47,7 @@ void pvr2_stream_set_callback(struct pvr2_stream *,
 			      void *data);
 
 /* Query / set the nominal buffer count */
+int pvr2_stream_get_buffer_count(struct pvr2_stream *);
 int pvr2_stream_set_buffer_count(struct pvr2_stream *,unsigned int);
 
 /* Get a pointer to a buffer that is either idle, ready, or is specified
@@ -58,6 +59,7 @@ struct pvr2_buffer *pvr2_stream_get_buffer(struct pvr2_stream *sp,int id);
 /* Find out how many buffers are idle or ready */
 int pvr2_stream_get_ready_count(struct pvr2_stream *);
 
+
 /* Kill all pending buffers and throw away any ready buffers as well */
 void pvr2_stream_kill(struct pvr2_stream *);
 
diff --git a/drivers/media/video/pvrusb2/pvrusb2-ioread.c b/drivers/media/video/pvrusb2/pvrusb2-ioread.c
index f7a2e225a00..b71f9a961f8 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-ioread.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-ioread.c
@@ -213,7 +213,9 @@ int pvr2_ioread_setup(struct pvr2_ioread *cp,struct pvr2_stream *sp)
 				   " pvr2_ioread_setup (tear-down) id=%p",cp);
 			pvr2_ioread_stop(cp);
 			pvr2_stream_kill(cp->stream);
-			pvr2_stream_set_buffer_count(cp->stream,0);
+			if (pvr2_stream_get_buffer_count(cp->stream)) {
+				pvr2_stream_set_buffer_count(cp->stream,0);
+			}
 			cp->stream = NULL;
 		}
 		if (sp) {
@@ -251,7 +253,6 @@ int pvr2_ioread_set_enabled(struct pvr2_ioread *cp,int fl)
 	return ret;
 }
 
-
 static int pvr2_ioread_get_buffer(struct pvr2_ioread *cp)
 {
 	int stat;
diff --git a/drivers/media/video/pvrusb2/pvrusb2-sysfs.c b/drivers/media/video/pvrusb2/pvrusb2-sysfs.c
index 6af55a8b6f0..d1dda5caf40 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-sysfs.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-sysfs.c
@@ -44,12 +44,16 @@ struct pvr2_sysfs {
 	struct kobj_type ktype;
 	struct class_device_attribute attr_v4l_minor_number;
 	struct class_device_attribute attr_unit_number;
+	int v4l_minor_number_created_ok;
+	int unit_number_created_ok;
 };
 
 #ifdef CONFIG_VIDEO_PVRUSB2_DEBUGIFC
 struct pvr2_sysfs_debugifc {
 	struct class_device_attribute attr_debugcmd;
 	struct class_device_attribute attr_debuginfo;
+	int debugcmd_created_ok;
+	int debuginfo_created_ok;
 };
 #endif /* CONFIG_VIDEO_PVRUSB2_DEBUGIFC */
 
@@ -67,6 +71,7 @@ struct pvr2_sysfs_ctl_item {
 	struct pvr2_sysfs_ctl_item *item_next;
 	struct attribute *attr_gen[7];
 	struct attribute_group grp;
+	int created_ok;
 	char name[80];
 };
 
@@ -487,6 +492,7 @@ static void pvr2_sysfs_add_control(struct pvr2_sysfs *sfp,int ctl_id)
 	struct pvr2_sysfs_func_set *fp;
 	struct pvr2_ctrl *cptr;
 	unsigned int cnt,acnt;
+	int ret;
 
 	if ((ctl_id < 0) || (ctl_id >= (sizeof(funcs)/sizeof(funcs[0])))) {
 		return;
@@ -589,7 +595,13 @@ static void pvr2_sysfs_add_control(struct pvr2_sysfs *sfp,int ctl_id)
 	cip->grp.name = cip->name;
 	cip->grp.attrs = cip->attr_gen;
 
-	sysfs_create_group(&sfp->class_dev->kobj,&cip->grp);
+	ret = sysfs_create_group(&sfp->class_dev->kobj,&cip->grp);
+	if (ret) {
+		printk(KERN_WARNING "%s: sysfs_create_group error: %d\n",
+		       __FUNCTION__, ret);
+		return;
+	}
+	cip->created_ok = !0;
 }
 
 #ifdef CONFIG_VIDEO_PVRUSB2_DEBUGIFC
@@ -600,6 +612,8 @@ static ssize_t debugcmd_store(struct class_device *,const char *,size_t count);
 static void pvr2_sysfs_add_debugifc(struct pvr2_sysfs *sfp)
 {
 	struct pvr2_sysfs_debugifc *dip;
+	int ret;
+
 	dip = kmalloc(sizeof(*dip),GFP_KERNEL);
 	if (!dip) return;
 	memset(dip,0,sizeof(*dip));
@@ -613,17 +627,34 @@ static void pvr2_sysfs_add_debugifc(struct pvr2_sysfs *sfp)
 	dip->attr_debuginfo.attr.mode = S_IRUGO;
 	dip->attr_debuginfo.show = debuginfo_show;
 	sfp->debugifc = dip;
-	class_device_create_file(sfp->class_dev,&dip->attr_debugcmd);
-	class_device_create_file(sfp->class_dev,&dip->attr_debuginfo);
+	ret = class_device_create_file(sfp->class_dev,&dip->attr_debugcmd);
+	if (ret < 0) {
+		printk(KERN_WARNING "%s: class_device_create_file error: %d\n",
+		       __FUNCTION__, ret);
+	} else {
+		dip->debugcmd_created_ok = !0;
+	}
+	ret = class_device_create_file(sfp->class_dev,&dip->attr_debuginfo);
+	if (ret < 0) {
+		printk(KERN_WARNING "%s: class_device_create_file error: %d\n",
+		       __FUNCTION__, ret);
+	} else {
+		dip->debuginfo_created_ok = !0;
+	}
 }
 
 
 static void pvr2_sysfs_tear_down_debugifc(struct pvr2_sysfs *sfp)
 {
 	if (!sfp->debugifc) return;
-	class_device_remove_file(sfp->class_dev,
-				 &sfp->debugifc->attr_debuginfo);
-	class_device_remove_file(sfp->class_dev,&sfp->debugifc->attr_debugcmd);
+	if (sfp->debugifc->debuginfo_created_ok) {
+		class_device_remove_file(sfp->class_dev,
+					 &sfp->debugifc->attr_debuginfo);
+	}
+	if (sfp->debugifc->debugcmd_created_ok) {
+		class_device_remove_file(sfp->class_dev,
+					 &sfp->debugifc->attr_debugcmd);
+	}
 	kfree(sfp->debugifc);
 	sfp->debugifc = NULL;
 }
@@ -645,7 +676,9 @@ static void pvr2_sysfs_tear_down_controls(struct pvr2_sysfs *sfp)
 	struct pvr2_sysfs_ctl_item *cip1,*cip2;
 	for (cip1 = sfp->item_first; cip1; cip1 = cip2) {
 		cip2 = cip1->item_next;
-		sysfs_remove_group(&sfp->class_dev->kobj,&cip1->grp);
+		if (cip1->created_ok) {
+			sysfs_remove_group(&sfp->class_dev->kobj,&cip1->grp);
+		}
 		pvr2_sysfs_trace("Destroying pvr2_sysfs_ctl_item id=%p",cip1);
 		kfree(cip1);
 	}
@@ -675,8 +708,14 @@ static void class_dev_destroy(struct pvr2_sysfs *sfp)
 	pvr2_sysfs_tear_down_debugifc(sfp);
 #endif /* CONFIG_VIDEO_PVRUSB2_DEBUGIFC */
 	pvr2_sysfs_tear_down_controls(sfp);
-	class_device_remove_file(sfp->class_dev,&sfp->attr_v4l_minor_number);
-	class_device_remove_file(sfp->class_dev,&sfp->attr_unit_number);
+	if (sfp->v4l_minor_number_created_ok) {
+		class_device_remove_file(sfp->class_dev,
+					 &sfp->attr_v4l_minor_number);
+	}
+	if (sfp->unit_number_created_ok) {
+		class_device_remove_file(sfp->class_dev,
+					 &sfp->attr_unit_number);
+	}
 	pvr2_sysfs_trace("Destroying class_dev id=%p",sfp->class_dev);
 	sfp->class_dev->class_data = NULL;
 	class_device_unregister(sfp->class_dev);
@@ -709,6 +748,8 @@ static void class_dev_create(struct pvr2_sysfs *sfp,
 {
 	struct usb_device *usb_dev;
 	struct class_device *class_dev;
+	int ret;
+
 	usb_dev = pvr2_hdw_get_dev(sfp->channel.hdw);
 	if (!usb_dev) return;
 	class_dev = kmalloc(sizeof(*class_dev),GFP_KERNEL);
@@ -733,20 +774,40 @@ static void class_dev_create(struct pvr2_sysfs *sfp,
 
 	sfp->class_dev = class_dev;
 	class_dev->class_data = sfp;
-	class_device_register(class_dev);
+	ret = class_device_register(class_dev);
+	if (ret) {
+		printk(KERN_ERR "%s: class_device_register failed\n",
+		       __FUNCTION__);
+		kfree(class_dev);
+		return;
+	}
 
 	sfp->attr_v4l_minor_number.attr.owner = THIS_MODULE;
 	sfp->attr_v4l_minor_number.attr.name = "v4l_minor_number";
 	sfp->attr_v4l_minor_number.attr.mode = S_IRUGO;
 	sfp->attr_v4l_minor_number.show = v4l_minor_number_show;
 	sfp->attr_v4l_minor_number.store = NULL;
-	class_device_create_file(sfp->class_dev,&sfp->attr_v4l_minor_number);
+	ret = class_device_create_file(sfp->class_dev,
+				       &sfp->attr_v4l_minor_number);
+	if (ret < 0) {
+		printk(KERN_WARNING "%s: class_device_create_file error: %d\n",
+		       __FUNCTION__, ret);
+	} else {
+		sfp->v4l_minor_number_created_ok = !0;
+	}
+
 	sfp->attr_unit_number.attr.owner = THIS_MODULE;
 	sfp->attr_unit_number.attr.name = "unit_number";
 	sfp->attr_unit_number.attr.mode = S_IRUGO;
 	sfp->attr_unit_number.show = unit_number_show;
 	sfp->attr_unit_number.store = NULL;
-	class_device_create_file(sfp->class_dev,&sfp->attr_unit_number);
+	ret = class_device_create_file(sfp->class_dev,&sfp->attr_unit_number);
+	if (ret < 0) {
+		printk(KERN_WARNING "%s: class_device_create_file error: %d\n",
+		       __FUNCTION__, ret);
+	} else {
+		sfp->unit_number_created_ok = !0;
+	}
 
 	pvr2_sysfs_add_controls(sfp);
 #ifdef CONFIG_VIDEO_PVRUSB2_DEBUGIFC
diff --git a/drivers/media/video/pwc/Kconfig b/drivers/media/video/pwc/Kconfig
index 697145e0bf1..8fdf7101d3b 100644
--- a/drivers/media/video/pwc/Kconfig
+++ b/drivers/media/video/pwc/Kconfig
@@ -30,7 +30,7 @@ config USB_PWC
 
 config USB_PWC_DEBUG
 	bool "USB Philips Cameras verbose debug"
-	depends USB_PWC
+	depends on USB_PWC
 	help
 	  Say Y here in order to have the pwc driver generate verbose debugging
 	  messages.
diff --git a/drivers/media/video/pwc/pwc-if.c b/drivers/media/video/pwc/pwc-if.c
index 47d0d83a026..d4703944df9 100644
--- a/drivers/media/video/pwc/pwc-if.c
+++ b/drivers/media/video/pwc/pwc-if.c
@@ -160,6 +160,7 @@ static struct file_operations pwc_fops = {
 	.poll =		pwc_video_poll,
 	.mmap =		pwc_video_mmap,
 	.ioctl =        pwc_video_ioctl,
+	.compat_ioctl = v4l_compat_ioctl32,
 	.llseek =       no_llseek,
 };
 static struct video_device pwc_template = {
diff --git a/drivers/media/video/saa7134/Kconfig b/drivers/media/video/saa7134/Kconfig
index e1c1805df1f..f5543166d19 100644
--- a/drivers/media/video/saa7134/Kconfig
+++ b/drivers/media/video/saa7134/Kconfig
@@ -40,6 +40,7 @@ config VIDEO_SAA7134_DVB
 	depends on VIDEO_SAA7134 && DVB_CORE
 	select VIDEO_BUF_DVB
 	select FW_LOADER
+	select DVB_PLL
 	---help---
 	  This adds support for DVB cards based on the
 	  Philips saa7134 chip.
diff --git a/drivers/media/video/saa7134/saa7134-alsa.c b/drivers/media/video/saa7134/saa7134-alsa.c
index f1fd69e7f11..d73cff1970a 100644
--- a/drivers/media/video/saa7134/saa7134-alsa.c
+++ b/drivers/media/video/saa7134/saa7134-alsa.c
@@ -997,9 +997,9 @@ static int saa7134_alsa_init(void)
 	struct saa7134_dev *dev = NULL;
 	struct list_head *list;
 
-	if (!dmasound_init && !dmasound_exit) {
-		dmasound_init = alsa_device_init;
-		dmasound_exit = alsa_device_exit;
+	if (!saa7134_dmasound_init && !saa7134_dmasound_exit) {
+		saa7134_dmasound_init = alsa_device_init;
+		saa7134_dmasound_exit = alsa_device_exit;
 	} else {
 		printk(KERN_WARNING "saa7134 ALSA: can't load, DMA sound handler already assigned (probably to OSS)\n");
 		return -EBUSY;
@@ -1036,8 +1036,8 @@ static void saa7134_alsa_exit(void)
 		snd_card_free(snd_saa7134_cards[idx]);
 	}
 
-	dmasound_init = NULL;
-	dmasound_exit = NULL;
+	saa7134_dmasound_init = NULL;
+	saa7134_dmasound_exit = NULL;
 	printk(KERN_INFO "saa7134 ALSA driver for DMA sound unloaded\n");
 
 	return;
diff --git a/drivers/media/video/saa7134/saa7134-core.c b/drivers/media/video/saa7134/saa7134-core.c
index 6e97cc84ba8..be3a81fc90a 100644
--- a/drivers/media/video/saa7134/saa7134-core.c
+++ b/drivers/media/video/saa7134/saa7134-core.c
@@ -95,8 +95,8 @@ LIST_HEAD(saa7134_devlist);
 static LIST_HEAD(mops_list);
 static unsigned int saa7134_devcount;
 
-int (*dmasound_init)(struct saa7134_dev *dev);
-int (*dmasound_exit)(struct saa7134_dev *dev);
+int (*saa7134_dmasound_init)(struct saa7134_dev *dev);
+int (*saa7134_dmasound_exit)(struct saa7134_dev *dev);
 
 #define dprintk(fmt, arg...)	if (core_debug) \
 	printk(KERN_DEBUG "%s/core: " fmt, dev->name , ## arg)
@@ -1008,8 +1008,8 @@ static int __devinit saa7134_initdev(struct pci_dev *pci_dev,
 	/* check for signal */
 	saa7134_irq_video_intl(dev);
 
-	if (dmasound_init && !dev->dmasound.priv_data) {
-		dmasound_init(dev);
+	if (saa7134_dmasound_init && !dev->dmasound.priv_data) {
+		saa7134_dmasound_init(dev);
 	}
 
 	return 0;
@@ -1036,8 +1036,8 @@ static void __devexit saa7134_finidev(struct pci_dev *pci_dev)
 	struct saa7134_mpeg_ops *mops;
 
 	/* Release DMA sound modules if present */
-	if (dmasound_exit && dev->dmasound.priv_data) {
-		dmasound_exit(dev);
+	if (saa7134_dmasound_exit && dev->dmasound.priv_data) {
+		saa7134_dmasound_exit(dev);
 	}
 
 	/* debugging ... */
@@ -1169,8 +1169,8 @@ EXPORT_SYMBOL(saa7134_boards);
 
 /* ----------------- for the DMA sound modules --------------- */
 
-EXPORT_SYMBOL(dmasound_init);
-EXPORT_SYMBOL(dmasound_exit);
+EXPORT_SYMBOL(saa7134_dmasound_init);
+EXPORT_SYMBOL(saa7134_dmasound_exit);
 EXPORT_SYMBOL(saa7134_pgtable_free);
 EXPORT_SYMBOL(saa7134_pgtable_build);
 EXPORT_SYMBOL(saa7134_pgtable_alloc);
diff --git a/drivers/media/video/saa7134/saa7134-oss.c b/drivers/media/video/saa7134/saa7134-oss.c
index 3895d05804a..2e3ba5f3145 100644
--- a/drivers/media/video/saa7134/saa7134-oss.c
+++ b/drivers/media/video/saa7134/saa7134-oss.c
@@ -993,9 +993,9 @@ static int saa7134_oss_init(void)
 	struct saa7134_dev *dev = NULL;
 	struct list_head *list;
 
-	if (!dmasound_init && !dmasound_exit) {
-		dmasound_init = oss_device_init;
-		dmasound_exit = oss_device_exit;
+	if (!saa7134_dmasound_init && !saa7134_dmasound_exit) {
+		saa7134_dmasound_init = oss_device_init;
+		saa7134_dmasound_exit = oss_device_exit;
 	} else {
 		printk(KERN_WARNING "saa7134 OSS: can't load, DMA sound handler already assigned (probably to ALSA)\n");
 		return -EBUSY;
@@ -1037,8 +1037,8 @@ static void saa7134_oss_exit(void)
 
 	}
 
-	dmasound_init = NULL;
-	dmasound_exit = NULL;
+	saa7134_dmasound_init = NULL;
+	saa7134_dmasound_exit = NULL;
 
 	printk(KERN_INFO "saa7134 OSS driver for DMA sound unloaded\n");
 
diff --git a/drivers/media/video/saa7134/saa7134-video.c b/drivers/media/video/saa7134/saa7134-video.c
index e4156ec9c6d..2c171af9a9f 100644
--- a/drivers/media/video/saa7134/saa7134-video.c
+++ b/drivers/media/video/saa7134/saa7134-video.c
@@ -40,7 +40,7 @@
 
 static unsigned int video_debug   = 0;
 static unsigned int gbuffers      = 8;
-static unsigned int noninterlaced = 0;
+static unsigned int noninterlaced = 1;
 static unsigned int gbufsize      = 720*576*4;
 static unsigned int gbufsize_max  = 720*576*4;
 module_param(video_debug, int, 0644);
@@ -48,7 +48,7 @@ MODULE_PARM_DESC(video_debug,"enable debug messages [video]");
 module_param(gbuffers, int, 0444);
 MODULE_PARM_DESC(gbuffers,"number of capture buffers, range 2-32");
 module_param(noninterlaced, int, 0644);
-MODULE_PARM_DESC(noninterlaced,"video input is noninterlaced");
+MODULE_PARM_DESC(noninterlaced,"capture non interlaced video");
 
 #define dprintk(fmt, arg...)	if (video_debug) \
 	printk(KERN_DEBUG "%s/video: " fmt, dev->name , ## arg)
@@ -2087,7 +2087,7 @@ static int video_do_ioctl(struct inode *inode, struct file *file,
 		struct v4l2_format *f = arg;
 		return saa7134_try_fmt(dev,fh,f);
 	}
-#ifdef HAVE_V4L1
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
 	case VIDIOCGMBUF:
 	{
 		struct video_mbuf *mbuf = arg;
diff --git a/drivers/media/video/saa7134/saa7134.h b/drivers/media/video/saa7134/saa7134.h
index d5ee99c574c..c04ce6152fd 100644
--- a/drivers/media/video/saa7134/saa7134.h
+++ b/drivers/media/video/saa7134/saa7134.h
@@ -586,8 +586,8 @@ void saa7134_dma_free(struct videobuf_queue *q,struct saa7134_buf *buf);
 
 int saa7134_set_dmabits(struct saa7134_dev *dev);
 
-extern int (*dmasound_init)(struct saa7134_dev *dev);
-extern int (*dmasound_exit)(struct saa7134_dev *dev);
+extern int (*saa7134_dmasound_init)(struct saa7134_dev *dev);
+extern int (*saa7134_dmasound_exit)(struct saa7134_dev *dev);
 
 
 /* ----------------------------------------------------------- */
diff --git a/drivers/media/video/stradis.c b/drivers/media/video/stradis.c
index b36ba9fa3a2..5686547ba76 100644
--- a/drivers/media/video/stradis.c
+++ b/drivers/media/video/stradis.c
@@ -2181,7 +2181,6 @@ static struct pci_device_id stradis_pci_tbl[] = {
 	{ 0 }
 };
 
-MODULE_DEVICE_TABLE(pci, stradis_pci_tbl);
 
 static struct pci_driver stradis_driver = {
 	.name = "stradis",
diff --git a/drivers/media/video/tuner-core.c b/drivers/media/video/tuner-core.c
index f7eb402d5f2..40590bae5ff 100644
--- a/drivers/media/video/tuner-core.c
+++ b/drivers/media/video/tuner-core.c
@@ -196,14 +196,6 @@ static void set_type(struct i2c_client *c, unsigned int type,
 		i2c_master_send(c, buffer, 4);
 		default_tuner_init(c);
 		break;
-	case TUNER_LG_TDVS_H06XF:
-		/* Set the Auxiliary Byte. */
-		buffer[2] &= ~0x20;
-		buffer[2] |= 0x18;
-		buffer[3] = 0x20;
-		i2c_master_send(c, buffer, 4);
-		default_tuner_init(c);
-		break;
 	case TUNER_PHILIPS_TD1316:
 		buffer[0] = 0x0b;
 		buffer[1] = 0xdc;
@@ -598,6 +590,7 @@ static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg)
 		if (t->standby)
 			t->standby (client);
 		break;
+#ifdef CONFIG_VIDEO_V4L1
 	case VIDIOCSAUDIO:
 		if (check_mode(t, "VIDIOCSAUDIO") == EINVAL)
 			return 0;
@@ -607,17 +600,6 @@ static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg)
 		/* Should be implemented, since bttv calls it */
 		tuner_dbg("VIDIOCSAUDIO not implemented.\n");
 		break;
-	case TDA9887_SET_CONFIG:
-		if (t->type == TUNER_TDA9887) {
-			int *i = arg;
-
-			t->tda9887_config = *i;
-			set_freq(client, t->tv_freq);
-		}
-		break;
-	/* --- v4l ioctls --- */
-	/* take care: bttv does userspace copying, we'll get a
-	   kernel pointer here... */
 	case VIDIOCSCHAN:
 		{
 			static const v4l2_std_id map[] = {
@@ -701,7 +683,18 @@ static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg)
 				    ? VIDEO_SOUND_STEREO : VIDEO_SOUND_MONO;
 			return 0;
 		}
+#endif
+	case TDA9887_SET_CONFIG:
+		if (t->type == TUNER_TDA9887) {
+			int *i = arg;
 
+			t->tda9887_config = *i;
+			set_freq(client, t->tv_freq);
+		}
+		break;
+	/* --- v4l ioctls --- */
+	/* take care: bttv does userspace copying, we'll get a
+	   kernel pointer here... */
 	case VIDIOC_S_STD:
 		{
 			v4l2_std_id *id = arg;
diff --git a/drivers/media/video/tuner-simple.c b/drivers/media/video/tuner-simple.c
index d071c5cbf01..abe37cf632c 100644
--- a/drivers/media/video/tuner-simple.c
+++ b/drivers/media/video/tuner-simple.c
@@ -339,7 +339,20 @@ static void default_set_tv_freq(struct i2c_client *c, unsigned int freq)
 	if (4 != (rc = i2c_master_send(c,buffer,4)))
 		tuner_warn("i2c i/o error: rc == %d (should be 4)\n",rc);
 
-	if (t->type == TUNER_MICROTUNE_4042FI5) {
+	switch (t->type) {
+	case TUNER_LG_TDVS_H06XF:
+		/* Set the Auxiliary Byte. */
+		buffer[0] = buffer[2];
+		buffer[0] &= ~0x20;
+		buffer[0] |= 0x18;
+		buffer[1] = 0x20;
+		tuner_dbg("tv 0x%02x 0x%02x\n",buffer[0],buffer[1]);
+
+		if (2 != (rc = i2c_master_send(c,buffer,2)))
+			tuner_warn("i2c i/o error: rc == %d (should be 2)\n",rc);
+		break;
+	case TUNER_MICROTUNE_4042FI5:
+	{
 		// FIXME - this may also work for other tuners
 		unsigned long timeout = jiffies + msecs_to_jiffies(1);
 		u8 status_byte = 0;
@@ -364,10 +377,12 @@ static void default_set_tv_freq(struct i2c_client *c, unsigned int freq)
 		buffer[2] = config;
 		buffer[3] = cb;
 		tuner_dbg("tv 0x%02x 0x%02x 0x%02x 0x%02x\n",
-		       buffer[0],buffer[1],buffer[2],buffer[3]);
+			  buffer[0],buffer[1],buffer[2],buffer[3]);
 
 		if (4 != (rc = i2c_master_send(c,buffer,4)))
 			tuner_warn("i2c i/o error: rc == %d (should be 4)\n",rc);
+		break;
+	}
 	}
 }
 
diff --git a/drivers/media/video/tuner-types.c b/drivers/media/video/tuner-types.c
index a167e17c6dc..8b542599ed4 100644
--- a/drivers/media/video/tuner-types.c
+++ b/drivers/media/video/tuner-types.c
@@ -926,11 +926,17 @@ static struct tuner_params tuner_lg_tdvs_h06xf_params[] = {
 
 /* ------------ TUNER_YMEC_TVF66T5_B_DFF - Philips PAL ------------ */
 
+static struct tuner_range tuner_ymec_tvf66t5_b_dff_pal_ranges[] = {
+	{ 16 * 160.25 /*MHz*/, 0x8e, 0x01, },
+	{ 16 * 464.25 /*MHz*/, 0x8e, 0x02, },
+	{ 16 * 999.99        , 0x8e, 0x08, },
+};
+
 static struct tuner_params tuner_ymec_tvf66t5_b_dff_params[] = {
 	{
 		.type   = TUNER_PARAM_TYPE_PAL,
-		.ranges = tuner_tena_9533_di_pal_ranges,
-		.count  = ARRAY_SIZE(tuner_tena_9533_di_pal_ranges),
+		.ranges = tuner_ymec_tvf66t5_b_dff_pal_ranges,
+		.count  = ARRAY_SIZE(tuner_ymec_tvf66t5_b_dff_pal_ranges),
 	},
 };
 
@@ -1027,10 +1033,11 @@ static struct tuner_params tuner_tnf_5335mf_params[] = {
 /* 70-79 */
 /* ------------ TUNER_SAMSUNG_TCPN_2121P30A - Samsung NTSC ------------ */
 
+/* '+ 4' turns on the Low Noise Amplifier */
 static struct tuner_range tuner_samsung_tcpn_2121p30a_ntsc_ranges[] = {
-	{ 16 * 130.00 /*MHz*/, 0xce, 0x01, },
-	{ 16 * 364.50 /*MHz*/, 0xce, 0x02, },
-	{ 16 * 999.99        , 0xce, 0x08, },
+	{ 16 * 130.00 /*MHz*/, 0xce, 0x01 + 4, },
+	{ 16 * 364.50 /*MHz*/, 0xce, 0x02 + 4, },
+	{ 16 * 999.99        , 0xce, 0x08 + 4, },
 };
 
 static struct tuner_params tuner_samsung_tcpn_2121p30a_params[] = {
@@ -1060,10 +1067,11 @@ static struct tuner_params tuner_thomson_fe6600_params[] = {
 
 /* ------------ TUNER_SAMSUNG_TCPG_6121P30A - Samsung PAL ------------ */
 
+/* '+ 4' turns on the Low Noise Amplifier */
 static struct tuner_range tuner_samsung_tcpg_6121p30a_pal_ranges[] = {
-	{ 16 * 146.25 /*MHz*/, 0xce, 0x01, },
-	{ 16 * 428.50 /*MHz*/, 0xce, 0x02, },
-	{ 16 * 999.99        , 0xce, 0x08, },
+	{ 16 * 146.25 /*MHz*/, 0xce, 0x01 + 4, },
+	{ 16 * 428.50 /*MHz*/, 0xce, 0x02 + 4, },
+	{ 16 * 999.99        , 0xce, 0x08 + 4, },
 };
 
 static struct tuner_params tuner_samsung_tcpg_6121p30a_params[] = {
diff --git a/drivers/media/video/usbvideo/Kconfig b/drivers/media/video/usbvideo/Kconfig
index 59fb899f31f..a0fd82b924f 100644
--- a/drivers/media/video/usbvideo/Kconfig
+++ b/drivers/media/video/usbvideo/Kconfig
@@ -3,7 +3,7 @@ config VIDEO_USBVIDEO
 
 config USB_VICAM
 	tristate "USB 3com HomeConnect (aka vicam) support (EXPERIMENTAL)"
-	depends on USB && VIDEO_V4L1 && EXPERIMENTAL
+	depends on USB && VIDEO_DEV && VIDEO_V4L1 && EXPERIMENTAL
 	select VIDEO_USBVIDEO
 	---help---
 	  Say Y here if you have 3com homeconnect camera (vicam).
@@ -13,7 +13,7 @@ config USB_VICAM
 
 config USB_IBMCAM
 	tristate "USB IBM (Xirlink) C-it Camera support"
-	depends on USB && VIDEO_V4L1
+	depends on USB && VIDEO_DEV && VIDEO_V4L1
 	select VIDEO_USBVIDEO
 	---help---
 	  Say Y here if you want to connect a IBM "C-It" camera, also known as
@@ -28,7 +28,7 @@ config USB_IBMCAM
 
 config USB_KONICAWC
 	tristate "USB Konica Webcam support"
-	depends on USB && VIDEO_V4L1
+	depends on USB && VIDEO_DEV && VIDEO_V4L1
 	select VIDEO_USBVIDEO
 	---help---
 	  Say Y here if you want support for webcams based on a Konica
@@ -39,7 +39,7 @@ config USB_KONICAWC
 
 config USB_QUICKCAM_MESSENGER
 	tristate "USB Logitech Quickcam Messenger"
-	depends on USB && VIDEO_DEV
+	depends on USB && VIDEO_DEV && VIDEO_V4L1
 	select VIDEO_USBVIDEO
 	---help---
 	  Say Y or M here to enable support for the USB Logitech Quickcam
diff --git a/drivers/media/video/v4l1-compat.c b/drivers/media/video/v4l1-compat.c
index d83a2c84d23..d7c3fcbc80f 100644
--- a/drivers/media/video/v4l1-compat.c
+++ b/drivers/media/video/v4l1-compat.c
@@ -599,6 +599,10 @@ v4l_compat_translate_ioctl(struct inode         *inode,
 			dprintk("VIDIOCGPICT / VIDIOC_G_FMT: %d\n",err);
 			break;
 		}
+
+		pict->depth   = ((fmt2->fmt.pix.bytesperline<<3)
+				 + (fmt2->fmt.pix.width-1) )
+				 /fmt2->fmt.pix.width;
 		pict->palette = pixelformat_to_palette(
 			fmt2->fmt.pix.pixelformat);
 		break;
diff --git a/drivers/media/video/v4l2-common.c b/drivers/media/video/v4l2-common.c
index f06dc19e504..8d972ffdaf9 100644
--- a/drivers/media/video/v4l2-common.c
+++ b/drivers/media/video/v4l2-common.c
@@ -202,7 +202,7 @@ static char *v4l2_memory_names[] = {
 /* ------------------------------------------------------------------ */
 /* debug help functions                                               */
 
-#ifdef HAVE_V4L1
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
 static const char *v4l1_ioctls[] = {
 	[_IOC_NR(VIDIOCGCAP)]       = "VIDIOCGCAP",
 	[_IOC_NR(VIDIOCGCHAN)]      = "VIDIOCGCHAN",
@@ -301,7 +301,7 @@ static const char *v4l2_ioctls[] = {
 #define V4L2_IOCTLS ARRAY_SIZE(v4l2_ioctls)
 
 static const char *v4l2_int_ioctls[] = {
-#ifdef HAVE_VIDEO_DECODER
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
 	[_IOC_NR(DECODER_GET_CAPABILITIES)]    = "DECODER_GET_CAPABILITIES",
 	[_IOC_NR(DECODER_GET_STATUS)]          = "DECODER_GET_STATUS",
 	[_IOC_NR(DECODER_SET_NORM)]            = "DECODER_SET_NORM",
@@ -367,7 +367,7 @@ void v4l_printk_ioctl(unsigned int cmd)
 		       (_IOC_NR(cmd) < V4L2_INT_IOCTLS) ?
 		       v4l2_int_ioctls[_IOC_NR(cmd)] : "UNKNOWN", dir, cmd);
 		break;
-#ifdef HAVE_V4L1
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
 	case 'v':
 		printk("v4l1 ioctl %s, dir=%s (0x%08x)\n",
 		       (_IOC_NR(cmd) < V4L1_IOCTLS) ?
@@ -414,6 +414,7 @@ void v4l_printk_ioctl_arg(char *s,unsigned int cmd, void *arg)
 		printk ("%s: tuner type=%d\n", s, *p);
 		break;
 	}
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
 	case DECODER_SET_VBI_BYPASS:
 	case DECODER_ENABLE_OUTPUT:
 	case DECODER_GET_STATUS:
@@ -424,6 +425,7 @@ void v4l_printk_ioctl_arg(char *s,unsigned int cmd, void *arg)
 	case VIDIOCCAPTURE:
 	case VIDIOCSYNC:
 	case VIDIOCSWRITEMODE:
+#endif
 	case TUNER_SET_TYPE_ADDR:
 	case TUNER_SET_STANDBY:
 	case TDA9887_SET_CONFIG:
@@ -755,6 +757,7 @@ void v4l_printk_ioctl_arg(char *s,unsigned int cmd, void *arg)
 				p->afc);
 		break;
 	}
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
 	case VIDIOCGVBIFMT:
 	case VIDIOCSVBIFMT:
 	{
@@ -924,6 +927,14 @@ void v4l_printk_ioctl_arg(char *s,unsigned int cmd, void *arg)
 				p->clipcount);
 		break;
 	}
+	case VIDIOCGFREQ:
+	case VIDIOCSFREQ:
+	{
+		unsigned long *p=arg;
+		printk ("%s: value=%lu\n", s, *p);
+		break;
+	}
+#endif
 	case VIDIOC_INT_AUDIO_CLOCK_FREQ:
 	case VIDIOC_INT_I2S_CLOCK_FREQ:
 	case VIDIOC_INT_S_STANDBY:
@@ -933,13 +944,6 @@ void v4l_printk_ioctl_arg(char *s,unsigned int cmd, void *arg)
 		printk ("%s: value=%d\n", s, *p);
 		break;
 	}
-	case VIDIOCGFREQ:
-	case VIDIOCSFREQ:
-	{
-		unsigned long *p=arg;
-		printk ("%s: value=%lu\n", s, *p);
-		break;
-	}
 	case VIDIOC_G_STD:
 	case VIDIOC_S_STD:
 	case VIDIOC_QUERYSTD:
diff --git a/drivers/media/video/videodev.c b/drivers/media/video/videodev.c
index b26ebaff226..88bf2af2a0e 100644
--- a/drivers/media/video/videodev.c
+++ b/drivers/media/video/videodev.c
@@ -760,7 +760,7 @@ static int __video_do_ioctl(struct inode *inode, struct file *file,
 		ret=vfd->vidioc_overlay(file, fh, *i);
 		break;
 	}
-#ifdef HAVE_V4L1
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
 	/* --- streaming capture ------------------------------------- */
 	case VIDIOCGMBUF:
 	{
@@ -1512,6 +1512,7 @@ int video_register_device(struct video_device *vfd, int type, int nr)
 	int i=0;
 	int base;
 	int end;
+	int ret;
 	char *name_base;
 
 	switch(type)
@@ -1537,6 +1538,8 @@ int video_register_device(struct video_device *vfd, int type, int nr)
 			name_base = "radio";
 			break;
 		default:
+			printk(KERN_ERR "%s called with unknown type: %d\n",
+			       __FUNCTION__, type);
 			return -1;
 	}
 
@@ -1571,9 +1574,18 @@ int video_register_device(struct video_device *vfd, int type, int nr)
 	vfd->class_dev.class       = &video_class;
 	vfd->class_dev.devt        = MKDEV(VIDEO_MAJOR, vfd->minor);
 	sprintf(vfd->class_dev.class_id, "%s%d", name_base, i - base);
-	class_device_register(&vfd->class_dev);
-	class_device_create_file(&vfd->class_dev,
-				&class_device_attr_name);
+	ret = class_device_register(&vfd->class_dev);
+	if (ret < 0) {
+		printk(KERN_ERR "%s: class_device_register failed\n",
+		       __FUNCTION__);
+		goto fail_minor;
+	}
+	ret = class_device_create_file(&vfd->class_dev, &class_device_attr_name);
+	if (ret < 0) {
+		printk(KERN_ERR "%s: class_device_create_file 'name' failed\n",
+		       __FUNCTION__);
+		goto fail_classdev;
+	}
 
 #if 1
 	/* needed until all drivers are fixed */
@@ -1583,6 +1595,15 @@ int video_register_device(struct video_device *vfd, int type, int nr)
 		       "http://lwn.net/Articles/36850/\n", vfd->name);
 #endif
 	return 0;
+
+fail_classdev:
+	class_device_unregister(&vfd->class_dev);
+fail_minor:
+	mutex_lock(&videodev_lock);
+	video_device[vfd->minor] = NULL;
+	vfd->minor = -1;
+	mutex_unlock(&videodev_lock);
+	return ret;
 }
 
 /**
diff --git a/drivers/media/video/vivi.c b/drivers/media/video/vivi.c
index 41d23c8acbd..841884af0cc 100644
--- a/drivers/media/video/vivi.c
+++ b/drivers/media/video/vivi.c
@@ -986,7 +986,7 @@ static int vidioc_dqbuf (struct file *file, void *priv, struct v4l2_buffer *p)
 				file->f_flags & O_NONBLOCK));
 }
 
-#ifdef HAVE_V4L1
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
 static int vidiocgmbuf (struct file *file, void *priv, struct video_mbuf *mbuf)
 {
 	struct vivi_fh  *fh=priv;
@@ -1328,7 +1328,7 @@ static struct video_device vivi = {
 	.vidioc_s_ctrl        = vidioc_s_ctrl,
 	.vidioc_streamon      = vidioc_streamon,
 	.vidioc_streamoff     = vidioc_streamoff,
-#ifdef HAVE_V4L1
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
 	.vidiocgmbuf          = vidiocgmbuf,
 #endif
 	.tvnorms              = tvnorms,
diff --git a/drivers/media/video/zoran.h b/drivers/media/video/zoran.h
index ffcda95ed9d..8fb4a3414e0 100644
--- a/drivers/media/video/zoran.h
+++ b/drivers/media/video/zoran.h
@@ -267,7 +267,7 @@ struct zoran_v4l_settings {
 };
 
 /* whoops, this one is undeclared if !v4l2 */
-#ifndef HAVE_V4L2
+#ifndef CONFIG_VIDEO_V4L2
 struct v4l2_jpegcompression {
 	int quality;
 	int APPn;
diff --git a/drivers/media/video/zoran_driver.c b/drivers/media/video/zoran_driver.c
index d9a5876eb38..5f90db27892 100644
--- a/drivers/media/video/zoran_driver.c
+++ b/drivers/media/video/zoran_driver.c
@@ -86,7 +86,7 @@
 #include "zoran_device.h"
 #include "zoran_card.h"
 
-#ifdef HAVE_V4L2
+#ifdef CONFIG_VIDEO_V4L2
 	/* we declare some card type definitions here, they mean
 	 * the same as the v4l1 ZORAN_VID_TYPE above, except it's v4l2 */
 #define ZORAN_V4L2_VID_FLAGS ( \
@@ -103,7 +103,7 @@ const struct zoran_format zoran_formats[] = {
 	{
 		.name = "15-bit RGB",
 		.palette = VIDEO_PALETTE_RGB555,
-#ifdef HAVE_V4L2
+#ifdef CONFIG_VIDEO_V4L2
 #ifdef __LITTLE_ENDIAN
 		.fourcc = V4L2_PIX_FMT_RGB555,
 #else
@@ -117,7 +117,7 @@ const struct zoran_format zoran_formats[] = {
 	}, {
 		.name = "16-bit RGB",
 		.palette = VIDEO_PALETTE_RGB565,
-#ifdef HAVE_V4L2
+#ifdef CONFIG_VIDEO_V4L2
 #ifdef __LITTLE_ENDIAN
 		.fourcc = V4L2_PIX_FMT_RGB565,
 #else
@@ -131,7 +131,7 @@ const struct zoran_format zoran_formats[] = {
 	}, {
 		.name = "24-bit RGB",
 		.palette = VIDEO_PALETTE_RGB24,
-#ifdef HAVE_V4L2
+#ifdef CONFIG_VIDEO_V4L2
 #ifdef __LITTLE_ENDIAN
 		.fourcc = V4L2_PIX_FMT_BGR24,
 #else
@@ -145,7 +145,7 @@ const struct zoran_format zoran_formats[] = {
 	}, {
 		.name = "32-bit RGB",
 		.palette = VIDEO_PALETTE_RGB32,
-#ifdef HAVE_V4L2
+#ifdef CONFIG_VIDEO_V4L2
 #ifdef __LITTLE_ENDIAN
 		.fourcc = V4L2_PIX_FMT_BGR32,
 #else
@@ -159,7 +159,7 @@ const struct zoran_format zoran_formats[] = {
 	}, {
 		.name = "4:2:2, packed, YUYV",
 		.palette = VIDEO_PALETTE_YUV422,
-#ifdef HAVE_V4L2
+#ifdef CONFIG_VIDEO_V4L2
 		.fourcc = V4L2_PIX_FMT_YUYV,
 		.colorspace = V4L2_COLORSPACE_SMPTE170M,
 #endif
@@ -169,7 +169,7 @@ const struct zoran_format zoran_formats[] = {
 	}, {
 		.name = "Hardware-encoded Motion-JPEG",
 		.palette = -1,
-#ifdef HAVE_V4L2
+#ifdef CONFIG_VIDEO_V4L2
 		.fourcc = V4L2_PIX_FMT_MJPEG,
 		.colorspace = V4L2_COLORSPACE_SMPTE170M,
 #endif
@@ -210,7 +210,7 @@ static int lock_norm = 0;	/* 1=Don't change TV standard (norm) */
 module_param(lock_norm, int, 0);
 MODULE_PARM_DESC(lock_norm, "Users can't change norm");
 
-#ifdef HAVE_V4L2
+#ifdef CONFIG_VIDEO_V4L2
 	/* small helper function for calculating buffersizes for v4l2
 	 * we calculate the nearest higher power-of-two, which
 	 * will be the recommended buffersize */
@@ -1761,7 +1761,7 @@ setup_overlay (struct file *file,
 	return wait_grab_pending(zr);
 }
 
-#ifdef HAVE_V4L2
+#ifdef CONFIG_VIDEO_V4L2
 	/* get the status of a buffer in the clients buffer queue */
 static int
 zoran_v4l2_buffer_status (struct file        *file,
@@ -2676,7 +2676,7 @@ zoran_do_ioctl (struct inode *inode,
 	}
 		break;
 
-#ifdef HAVE_V4L2
+#ifdef CONFIG_VIDEO_V4L2
 
 		/* The new video4linux2 capture interface - much nicer than video4linux1, since
 		 * it allows for integrating the JPEG capturing calls inside standard v4l2
@@ -4689,7 +4689,7 @@ static struct file_operations zoran_fops = {
 struct video_device zoran_template __devinitdata = {
 	.name = ZORAN_NAME,
 	.type = ZORAN_VID_TYPE,
-#ifdef HAVE_V4L2
+#ifdef CONFIG_VIDEO_V4L2
 	.type2 = ZORAN_V4L2_VID_FLAGS,
 #endif
 	.hardware = ZORAN_HARDWARE,