Merge tag 'v2.6.38' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 into for-linus

10 files changed, 195 insertions, 31 deletions

diff --git a/drivers/media/video/au0828/au0828-video.c b/drivers/media/video/au0828/au0828-video.c
index e41e4ad5cc4..9c475c600fc 100644
--- a/drivers/media/video/au0828/au0828-video.c
+++ b/drivers/media/video/au0828/au0828-video.c
@@ -1758,7 +1758,12 @@ static int vidioc_reqbufs(struct file *file, void *priv,
 	if (rc < 0)
 		return rc;
 
-	return videobuf_reqbufs(&fh->vb_vidq, rb);
+	if (fh->type == V4L2_BUF_TYPE_VIDEO_CAPTURE)
+		rc = videobuf_reqbufs(&fh->vb_vidq, rb);
+	else if (fh->type == V4L2_BUF_TYPE_VBI_CAPTURE)
+		rc = videobuf_reqbufs(&fh->vb_vbiq, rb);
+
+	return rc;
 }
 
 static int vidioc_querybuf(struct file *file, void *priv,
@@ -1772,7 +1777,12 @@ static int vidioc_querybuf(struct file *file, void *priv,
 	if (rc < 0)
 		return rc;
 
-	return videobuf_querybuf(&fh->vb_vidq, b);
+	if (fh->type == V4L2_BUF_TYPE_VIDEO_CAPTURE)
+		rc = videobuf_querybuf(&fh->vb_vidq, b);
+	else if (fh->type == V4L2_BUF_TYPE_VBI_CAPTURE)
+		rc = videobuf_querybuf(&fh->vb_vbiq, b);
+
+	return rc;
 }
 
 static int vidioc_qbuf(struct file *file, void *priv, struct v4l2_buffer *b)
@@ -1785,7 +1795,12 @@ static int vidioc_qbuf(struct file *file, void *priv, struct v4l2_buffer *b)
 	if (rc < 0)
 		return rc;
 
-	return videobuf_qbuf(&fh->vb_vidq, b);
+	if (fh->type == V4L2_BUF_TYPE_VIDEO_CAPTURE)
+		rc = videobuf_qbuf(&fh->vb_vidq, b);
+	else if (fh->type == V4L2_BUF_TYPE_VBI_CAPTURE)
+		rc = videobuf_qbuf(&fh->vb_vbiq, b);
+
+	return rc;
 }
 
 static int vidioc_dqbuf(struct file *file, void *priv, struct v4l2_buffer *b)
@@ -1806,7 +1821,12 @@ static int vidioc_dqbuf(struct file *file, void *priv, struct v4l2_buffer *b)
 		dev->greenscreen_detected = 0;
 	}
 
-	return videobuf_dqbuf(&fh->vb_vidq, b, file->f_flags & O_NONBLOCK);
+	if (fh->type == V4L2_BUF_TYPE_VIDEO_CAPTURE)
+		rc = videobuf_dqbuf(&fh->vb_vidq, b, file->f_flags & O_NONBLOCK);
+	else if (fh->type == V4L2_BUF_TYPE_VBI_CAPTURE)
+		rc = videobuf_dqbuf(&fh->vb_vbiq, b, file->f_flags & O_NONBLOCK);
+
+	return rc;
 }
 
 static struct v4l2_file_operations au0828_v4l_fops = {
diff --git a/drivers/media/video/cx18/cx18-cards.c b/drivers/media/video/cx18/cx18-cards.c
index 87177733cf9..68ad1963f42 100644
--- a/drivers/media/video/cx18/cx18-cards.c
+++ b/drivers/media/video/cx18/cx18-cards.c
@@ -95,6 +95,53 @@ static const struct cx18_card cx18_card_hvr1600_esmt = {
 	.i2c = &cx18_i2c_std,
 };
 
+static const struct cx18_card cx18_card_hvr1600_s5h1411 = {
+	.type = CX18_CARD_HVR_1600_S5H1411,
+	.name = "Hauppauge HVR-1600",
+	.comment = "Simultaneous Digital and Analog TV capture supported\n",
+	.v4l2_capabilities = CX18_CAP_ENCODER,
+	.hw_audio_ctrl = CX18_HW_418_AV,
+	.hw_muxer = CX18_HW_CS5345,
+	.hw_all = CX18_HW_TVEEPROM | CX18_HW_418_AV | CX18_HW_TUNER |
+		  CX18_HW_CS5345 | CX18_HW_DVB | CX18_HW_GPIO_RESET_CTRL |
+		  CX18_HW_Z8F0811_IR_HAUP,
+	.video_inputs = {
+		{ CX18_CARD_INPUT_VID_TUNER,  0, CX18_AV_COMPOSITE7 },
+		{ CX18_CARD_INPUT_SVIDEO1,    1, CX18_AV_SVIDEO1    },
+		{ CX18_CARD_INPUT_COMPOSITE1, 1, CX18_AV_COMPOSITE3 },
+		{ CX18_CARD_INPUT_SVIDEO2,    2, CX18_AV_SVIDEO2    },
+		{ CX18_CARD_INPUT_COMPOSITE2, 2, CX18_AV_COMPOSITE4 },
+	},
+	.audio_inputs = {
+		{ CX18_CARD_INPUT_AUD_TUNER,
+		  CX18_AV_AUDIO8, CS5345_IN_1 | CS5345_MCLK_1_5 },
+		{ CX18_CARD_INPUT_LINE_IN1,
+		  CX18_AV_AUDIO_SERIAL1, CS5345_IN_2 },
+		{ CX18_CARD_INPUT_LINE_IN2,
+		  CX18_AV_AUDIO_SERIAL1, CS5345_IN_3 },
+	},
+	.radio_input = { CX18_CARD_INPUT_AUD_TUNER,
+			 CX18_AV_AUDIO_SERIAL1, CS5345_IN_4 },
+	.ddr = {
+		/* ESMT M13S128324A-5B memory */
+		.chip_config = 0x003,
+		.refresh = 0x30c,
+		.timing1 = 0x44220e82,
+		.timing2 = 0x08,
+		.tune_lane = 0,
+		.initial_emrs = 0,
+	},
+	.gpio_init.initial_value = 0x3001,
+	.gpio_init.direction = 0x3001,
+	.gpio_i2c_slave_reset = {
+		.active_lo_mask = 0x3001,
+		.msecs_asserted = 10,
+		.msecs_recovery = 40,
+		.ir_reset_mask  = 0x0001,
+	},
+	.i2c = &cx18_i2c_std,
+};
+
 static const struct cx18_card cx18_card_hvr1600_samsung = {
 	.type = CX18_CARD_HVR_1600_SAMSUNG,
 	.name = "Hauppauge HVR-1600 (Preproduction)",
@@ -523,7 +570,8 @@ static const struct cx18_card *cx18_card_list[] = {
 	&cx18_card_toshiba_qosmio_dvbt,
 	&cx18_card_leadtek_pvr2100,
 	&cx18_card_leadtek_dvr3100h,
-	&cx18_card_gotview_dvd3
+	&cx18_card_gotview_dvd3,
+	&cx18_card_hvr1600_s5h1411
 };
 
 const struct cx18_card *cx18_get_card(u16 index)
diff --git a/drivers/media/video/cx18/cx18-driver.c b/drivers/media/video/cx18/cx18-driver.c
index 944af8adbe0..b1c3cbd9274 100644
--- a/drivers/media/video/cx18/cx18-driver.c
+++ b/drivers/media/video/cx18/cx18-driver.c
@@ -157,6 +157,7 @@ MODULE_PARM_DESC(cardtype,
 		 "\t\t\t 7 = Leadtek WinFast PVR2100\n"
 		 "\t\t\t 8 = Leadtek WinFast DVR3100 H\n"
 		 "\t\t\t 9 = GoTView PCI DVD3 Hybrid\n"
+		 "\t\t\t 10 = Hauppauge HVR 1600 (S5H1411)\n"
 		 "\t\t\t 0 = Autodetect (default)\n"
 		 "\t\t\t-1 = Ignore this card\n\t\t");
 MODULE_PARM_DESC(pal, "Set PAL standard: B, G, H, D, K, I, M, N, Nc, 60");
@@ -337,6 +338,7 @@ void cx18_read_eeprom(struct cx18 *cx, struct tveeprom *tv)
 	switch (cx->card->type) {
 	case CX18_CARD_HVR_1600_ESMT:
 	case CX18_CARD_HVR_1600_SAMSUNG:
+	case CX18_CARD_HVR_1600_S5H1411:
 		tveeprom_hauppauge_analog(&c, tv, eedata);
 		break;
 	case CX18_CARD_YUAN_MPC718:
@@ -365,7 +367,25 @@ static void cx18_process_eeprom(struct cx18 *cx)
 	   from the model number. Use the cardtype module option if you
 	   have one of these preproduction models. */
 	switch (tv.model) {
-	case 74000 ... 74999:
+	case 74301: /* Retail models */
+	case 74321:
+	case 74351: /* OEM models */
+	case 74361:
+		/* Digital side is s5h1411/tda18271 */
+		cx->card = cx18_get_card(CX18_CARD_HVR_1600_S5H1411);
+		break;
+	case 74021: /* Retail models */
+	case 74031:
+	case 74041:
+	case 74141:
+	case 74541: /* OEM models */
+	case 74551:
+	case 74591:
+	case 74651:
+	case 74691:
+	case 74751:
+	case 74891:
+		/* Digital side is s5h1409/mxl5005s */
 		cx->card = cx18_get_card(CX18_CARD_HVR_1600_ESMT);
 		break;
 	case 0x718:
@@ -377,7 +397,8 @@ static void cx18_process_eeprom(struct cx18 *cx)
 		CX18_ERR("Invalid EEPROM\n");
 		return;
 	default:
-		CX18_ERR("Unknown model %d, defaulting to HVR-1600\n", tv.model);
+		CX18_ERR("Unknown model %d, defaulting to original HVR-1600 "
+			 "(cardtype=1)\n", tv.model);
 		cx->card = cx18_get_card(CX18_CARD_HVR_1600_ESMT);
 		break;
 	}
diff --git a/drivers/media/video/cx18/cx18-driver.h b/drivers/media/video/cx18/cx18-driver.h
index 306caac6d3f..f736679d251 100644
--- a/drivers/media/video/cx18/cx18-driver.h
+++ b/drivers/media/video/cx18/cx18-driver.h
@@ -85,7 +85,8 @@
 #define CX18_CARD_LEADTEK_PVR2100     6 /* Leadtek WinFast PVR2100 */
 #define CX18_CARD_LEADTEK_DVR3100H    7 /* Leadtek WinFast DVR3100 H */
 #define CX18_CARD_GOTVIEW_PCI_DVD3    8 /* GoTView PCI DVD3 Hybrid */
-#define CX18_CARD_LAST		      8
+#define CX18_CARD_HVR_1600_S5H1411    9 /* Hauppauge HVR 1600 s5h1411/tda18271*/
+#define CX18_CARD_LAST		      9
 
 #define CX18_ENC_STREAM_TYPE_MPG  0
 #define CX18_ENC_STREAM_TYPE_TS   1
diff --git a/drivers/media/video/cx18/cx18-dvb.c b/drivers/media/video/cx18/cx18-dvb.c
index f0381d62518..f41922bd402 100644
--- a/drivers/media/video/cx18/cx18-dvb.c
+++ b/drivers/media/video/cx18/cx18-dvb.c
@@ -29,6 +29,8 @@
 #include "cx18-gpio.h"
 #include "s5h1409.h"
 #include "mxl5005s.h"
+#include "s5h1411.h"
+#include "tda18271.h"
 #include "zl10353.h"
 
 #include <linux/firmware.h>
@@ -77,6 +79,32 @@ static struct s5h1409_config hauppauge_hvr1600_config = {
 };
 
 /*
+ * CX18_CARD_HVR_1600_S5H1411
+ */
+static struct s5h1411_config hcw_s5h1411_config = {
+	.output_mode   = S5H1411_SERIAL_OUTPUT,
+	.gpio          = S5H1411_GPIO_OFF,
+	.vsb_if        = S5H1411_IF_44000,
+	.qam_if        = S5H1411_IF_4000,
+	.inversion     = S5H1411_INVERSION_ON,
+	.status_mode   = S5H1411_DEMODLOCKING,
+	.mpeg_timing   = S5H1411_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK,
+};
+
+static struct tda18271_std_map hauppauge_tda18271_std_map = {
+	.atsc_6   = { .if_freq = 5380, .agc_mode = 3, .std = 3,
+		      .if_lvl = 6, .rfagc_top = 0x37 },
+	.qam_6    = { .if_freq = 4000, .agc_mode = 3, .std = 0,
+		      .if_lvl = 6, .rfagc_top = 0x37 },
+};
+
+static struct tda18271_config hauppauge_tda18271_config = {
+	.std_map = &hauppauge_tda18271_std_map,
+	.gate    = TDA18271_GATE_DIGITAL,
+	.output_opt = TDA18271_OUTPUT_LT_OFF,
+};
+
+/*
  * CX18_CARD_LEADTEK_DVR3100H
  */
 /* Information/confirmation of proper config values provided by Terry Wu */
@@ -244,6 +272,7 @@ static int cx18_dvb_start_feed(struct dvb_demux_feed *feed)
 	switch (cx->card->type) {
 	case CX18_CARD_HVR_1600_ESMT:
 	case CX18_CARD_HVR_1600_SAMSUNG:
+	case CX18_CARD_HVR_1600_S5H1411:
 		v = cx18_read_reg(cx, CX18_REG_DMUX_NUM_PORT_0_CONTROL);
 		v |= 0x00400000; /* Serial Mode */
 		v |= 0x00002000; /* Data Length - Byte */
@@ -455,6 +484,15 @@ static int dvb_register(struct cx18_stream *stream)
 			ret = 0;
 		}
 		break;
+	case CX18_CARD_HVR_1600_S5H1411:
+		dvb->fe = dvb_attach(s5h1411_attach,
+				     &hcw_s5h1411_config,
+				     &cx->i2c_adap[0]);
+		if (dvb->fe != NULL)
+			dvb_attach(tda18271_attach, dvb->fe,
+				   0x60, &cx->i2c_adap[0],
+				   &hauppauge_tda18271_config);
+		break;
 	case CX18_CARD_LEADTEK_DVR3100H:
 		dvb->fe = dvb_attach(zl10353_attach,
 				     &leadtek_dvr3100h_demod,
diff --git a/drivers/media/video/cx23885/cx23885-i2c.c b/drivers/media/video/cx23885/cx23885-i2c.c
index ed3d8f55029..307ff543c25 100644
--- a/drivers/media/video/cx23885/cx23885-i2c.c
+++ b/drivers/media/video/cx23885/cx23885-i2c.c
@@ -122,10 +122,6 @@ static int i2c_sendbytes(struct i2c_adapter *i2c_adap,
 
 	if (!i2c_wait_done(i2c_adap))
 		goto eio;
-	if (!i2c_slave_did_ack(i2c_adap)) {
-		retval = -ENXIO;
-		goto err;
-	}
 	if (i2c_debug) {
 		printk(" <W %02x %02x", msg->addr << 1, msg->buf[0]);
 		if (!(ctrl & I2C_NOSTOP))
@@ -158,7 +154,6 @@ static int i2c_sendbytes(struct i2c_adapter *i2c_adap,
 
  eio:
 	retval = -EIO;
- err:
 	if (i2c_debug)
 		printk(KERN_ERR " ERR: %d\n", retval);
 	return retval;
@@ -209,10 +204,6 @@ static int i2c_readbytes(struct i2c_adapter *i2c_adap,
 
 		if (!i2c_wait_done(i2c_adap))
 			goto eio;
-		if (cnt == 0 && !i2c_slave_did_ack(i2c_adap)) {
-			retval = -ENXIO;
-			goto err;
-		}
 		msg->buf[cnt] = cx_read(bus->reg_rdata) & 0xff;
 		if (i2c_debug) {
 			dprintk(1, " %02x", msg->buf[cnt]);
@@ -224,7 +215,6 @@ static int i2c_readbytes(struct i2c_adapter *i2c_adap,
 
  eio:
 	retval = -EIO;
- err:
 	if (i2c_debug)
 		printk(KERN_ERR " ERR: %d\n", retval);
 	return retval;
diff --git a/drivers/media/video/cx25840/cx25840-core.c b/drivers/media/video/cx25840/cx25840-core.c
index 6fc09dd41b9..35796e03524 100644
--- a/drivers/media/video/cx25840/cx25840-core.c
+++ b/drivers/media/video/cx25840/cx25840-core.c
@@ -2015,7 +2015,8 @@ static int cx25840_probe(struct i2c_client *client,
 		kfree(state);
 		return err;
 	}
-	v4l2_ctrl_cluster(2, &state->volume);
+	if (!is_cx2583x(state))
+		v4l2_ctrl_cluster(2, &state->volume);
 	v4l2_ctrl_handler_setup(&state->hdl);
 
 	if (client->dev.platform_data) {
diff --git a/drivers/media/video/ivtv/ivtv-irq.c b/drivers/media/video/ivtv/ivtv-irq.c
index 9b4faf00919..9c29e964d40 100644
--- a/drivers/media/video/ivtv/ivtv-irq.c
+++ b/drivers/media/video/ivtv/ivtv-irq.c
@@ -628,22 +628,66 @@ static void ivtv_irq_enc_pio_complete(struct ivtv *itv)
 static void ivtv_irq_dma_err(struct ivtv *itv)
 {
 	u32 data[CX2341X_MBOX_MAX_DATA];
+	u32 status;
 
 	del_timer(&itv->dma_timer);
+
 	ivtv_api_get_data(&itv->enc_mbox, IVTV_MBOX_DMA_END, 2, data);
+	status = read_reg(IVTV_REG_DMASTATUS);
 	IVTV_DEBUG_WARN("DMA ERROR %08x %08x %08x %d\n", data[0], data[1],
-				read_reg(IVTV_REG_DMASTATUS), itv->cur_dma_stream);
-	write_reg(read_reg(IVTV_REG_DMASTATUS) & 3, IVTV_REG_DMASTATUS);
+				status, itv->cur_dma_stream);
+	/*
+	 * We do *not* write back to the IVTV_REG_DMASTATUS register to
+	 * clear the error status, if either the encoder write (0x02) or
+	 * decoder read (0x01) bus master DMA operation do not indicate
+	 * completed.  We can race with the DMA engine, which may have
+	 * transitioned to completed status *after* we read the register.
+	 * Setting a IVTV_REG_DMASTATUS flag back to "busy" status, after the
+	 * DMA engine has completed, will cause the DMA engine to stop working.
+	 */
+	status &= 0x3;
+	if (status == 0x3)
+		write_reg(status, IVTV_REG_DMASTATUS);
+
 	if (!test_bit(IVTV_F_I_UDMA, &itv->i_flags) &&
 	    itv->cur_dma_stream >= 0 && itv->cur_dma_stream < IVTV_MAX_STREAMS) {
 		struct ivtv_stream *s = &itv->streams[itv->cur_dma_stream];
 
-		/* retry */
-		if (s->type >= IVTV_DEC_STREAM_TYPE_MPG)
+		if (s->type >= IVTV_DEC_STREAM_TYPE_MPG) {
+			/* retry */
+			/*
+			 * FIXME - handle cases of DMA error similar to
+			 * encoder below, except conditioned on status & 0x1
+			 */
 			ivtv_dma_dec_start(s);
-		else
-			ivtv_dma_enc_start(s);
-		return;
+			return;
+		} else {
+			if ((status & 0x2) == 0) {
+				/*
+				 * CX2341x Bus Master DMA write is ongoing.
+				 * Reset the timer and let it complete.
+				 */
+				itv->dma_timer.expires =
+						jiffies + msecs_to_jiffies(600);
+				add_timer(&itv->dma_timer);
+				return;
+			}
+
+			if (itv->dma_retries < 3) {
+				/*
+				 * CX2341x Bus Master DMA write has ended.
+				 * Retry the write, starting with the first
+				 * xfer segment. Just retrying the current
+				 * segment is not sufficient.
+				 */
+				s->sg_processed = 0;
+				itv->dma_retries++;
+				ivtv_dma_enc_start_xfer(s);
+				return;
+			}
+			/* Too many retries, give up on this one */
+		}
+
 	}
 	if (test_bit(IVTV_F_I_UDMA, &itv->i_flags)) {
 		ivtv_udma_start(itv);
diff --git a/drivers/media/video/mem2mem_testdev.c b/drivers/media/video/mem2mem_testdev.c
index c179041d91f..e7e717800ee 100644
--- a/drivers/media/video/mem2mem_testdev.c
+++ b/drivers/media/video/mem2mem_testdev.c
@@ -1011,7 +1011,6 @@ static int m2mtest_remove(struct platform_device *pdev)
 	v4l2_m2m_release(dev->m2m_dev);
 	del_timer_sync(&dev->timer);
 	video_unregister_device(dev->vfd);
-	video_device_release(dev->vfd);
 	v4l2_device_unregister(&dev->v4l2_dev);
 	kfree(dev);
 
diff --git a/drivers/media/video/s2255drv.c b/drivers/media/video/s2255drv.c
index b63f8cafa67..561909b65ce 100644
--- a/drivers/media/video/s2255drv.c
+++ b/drivers/media/video/s2255drv.c
@@ -57,7 +57,7 @@
 #include <linux/usb.h>
 
 #define S2255_MAJOR_VERSION	1
-#define S2255_MINOR_VERSION	20
+#define S2255_MINOR_VERSION	21
 #define S2255_RELEASE		0
 #define S2255_VERSION		KERNEL_VERSION(S2255_MAJOR_VERSION, \
 					       S2255_MINOR_VERSION, \
@@ -312,9 +312,9 @@ struct s2255_fh {
 };
 
 /* current cypress EEPROM firmware version */
-#define S2255_CUR_USB_FWVER	((3 << 8) | 6)
+#define S2255_CUR_USB_FWVER	((3 << 8) | 11)
 /* current DSP FW version */
-#define S2255_CUR_DSP_FWVER     8
+#define S2255_CUR_DSP_FWVER     10102
 /* Need DSP version 5+ for video status feature */
 #define S2255_MIN_DSP_STATUS      5
 #define S2255_MIN_DSP_COLORFILTER 8
@@ -492,9 +492,11 @@ static void planar422p_to_yuv_packed(const unsigned char *in,
 
 static void s2255_reset_dsppower(struct s2255_dev *dev)
 {
-	s2255_vendor_req(dev, 0x40, 0x0b0b, 0x0b0b, NULL, 0, 1);
+	s2255_vendor_req(dev, 0x40, 0x0b0b, 0x0b01, NULL, 0, 1);
 	msleep(10);
 	s2255_vendor_req(dev, 0x50, 0x0000, 0x0000, NULL, 0, 1);
+	msleep(600);
+	s2255_vendor_req(dev, 0x10, 0x0000, 0x0000, NULL, 0, 1);
 	return;
 }