Merge tag 'drm-intel-next-2012-04-23' of git://people.freedesktop.org/~danvet/drm-intel into drm-core-next

Daniel Vetter writes:

A new drm-intel-next pull. Highlights:
- More gmbus patches from Daniel Kurtz, I think gmbus is now ready, all
 known issues fixed.
- Fencing cleanup and pipelined fencing removal from Chris.
- rc6 residency interface from Ben, useful for powertop.
- Cleanups and code reorg around the ringbuffer code (Ben&me).
- Use hw semaphores in the pageflip code from Ben.
- More vlv stuff from Jesse, unfortunately his vlv cpu is doa, so less
 merged than I've hoped for - we still have the unused function warning :(
- More hsw patches from Eugeni, again, not yet enabled fully.
- intel_pm.c refactoring from Eugeni.
- Ironlake sprite support from Chris.
- And various smaller improvements/fixes all over the place.

Note that this pull request also contains a backmerge of -rc3 to sort out
a few things in -next. I've also had to frob the shortlog a bit to exclude
anything that -rc3 brings in with this pull.

Regression wise we have a few strange bugs going on, but for all of them
closer inspection revealed that they've been pre-existing, just now
slightly more likely to be hit. And for most of them we have a patch
already. Otherwise QA has not reported any regressions, and I'm also not
aware of anything bad happening in 3.4.

* tag 'drm-intel-next-2012-04-23' of git://people.freedesktop.org/~danvet/drm-intel: (420 commits)
  drm/i915: rc6 residency (fix the fix)
  drm/i915/tv: fix open-coded ARRAY_SIZE.
  drm/i915: invalidate render cache on gen2
  drm/i915: Silence the change of LVDS sync polarity
  drm/i915: add generic power management initialization
  drm/i915: move clock gating functionality into intel_pm module
  drm/i915: move emon functionality into intel_pm module
  drm/i915: move drps, rps and rc6-related functions to intel_pm
  drm/i915: fix line breaks in intel_pm
  drm/i915: move watermarks settings into intel_pm module
  drm/i915: move fbc-related functionality into intel_pm module
  drm/i915: Refactor get_fence() to use the common fence writing routine
  drm/i915: Refactor fence clearing to use the common fence writing routine
  drm/i915: Refactor put_fence() to use the common fence writing routine
  drm/i915: Prepare to consolidate fence writing
  drm/i915: Remove the unsightly "optimisation" from flush_fence()
  drm/i915: Simplify fence finding
  drm/i915: Discard the unused obj->last_fenced_ring
  drm/i915: Remove unused ring->setup_seqno
  drm/i915: Remove fence pipelining
  ...

4 files changed, 85 insertions, 35 deletions

diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.c b/drivers/media/dvb/dvb-core/dvb_frontend.c
index 4555baa383b..39696c6a4ed 100644
--- a/drivers/media/dvb/dvb-core/dvb_frontend.c
+++ b/drivers/media/dvb/dvb-core/dvb_frontend.c
@@ -143,10 +143,12 @@ struct dvb_frontend_private {
 static void dvb_frontend_wakeup(struct dvb_frontend *fe);
 static int dtv_get_frontend(struct dvb_frontend *fe,
 			    struct dvb_frontend_parameters *p_out);
+static int dtv_property_legacy_params_sync(struct dvb_frontend *fe,
+					   struct dvb_frontend_parameters *p);
 
 static bool has_get_frontend(struct dvb_frontend *fe)
 {
-	return fe->ops.get_frontend;
+	return fe->ops.get_frontend != NULL;
 }
 
 /*
@@ -697,6 +699,7 @@ restart:
 					fepriv->algo_status |= DVBFE_ALGO_SEARCH_AGAIN;
 					fepriv->delay = HZ / 2;
 				}
+				dtv_property_legacy_params_sync(fe, &fepriv->parameters_out);
 				fe->ops.read_status(fe, &s);
 				if (s != fepriv->status) {
 					dvb_frontend_add_event(fe, s); /* update event list */
@@ -1833,6 +1836,13 @@ static int dtv_set_frontend(struct dvb_frontend *fe)
 		return -EINVAL;
 
 	/*
+	 * Initialize output parameters to match the values given by
+	 * the user. FE_SET_FRONTEND triggers an initial frontend event
+	 * with status = 0, which copies output parameters to userspace.
+	 */
+	dtv_property_legacy_params_sync(fe, &fepriv->parameters_out);
+
+	/*
 	 * Be sure that the bandwidth will be filled for all
 	 * non-satellite systems, as tuners need to know what
 	 * low pass/Nyquist half filter should be applied, in
diff --git a/drivers/media/dvb/dvb-usb/it913x.c b/drivers/media/dvb/dvb-usb/it913x.c
index 3b7b102f20a..482d249ca7f 100644
--- a/drivers/media/dvb/dvb-usb/it913x.c
+++ b/drivers/media/dvb/dvb-usb/it913x.c
@@ -238,12 +238,27 @@ static int it913x_read_reg(struct usb_device *udev, u32 reg)
 
 static u32 it913x_query(struct usb_device *udev, u8 pro)
 {
-	int ret;
+	int ret, i;
 	u8 data[4];
-	ret = it913x_io(udev, READ_LONG, pro, CMD_DEMOD_READ,
-		0x1222, 0, &data[0], 3);
+	u8 ver;
+
+	for (i = 0; i < 5; i++) {
+		ret = it913x_io(udev, READ_LONG, pro, CMD_DEMOD_READ,
+			0x1222, 0, &data[0], 3);
+		ver = data[0];
+		if (ver > 0 && ver < 3)
+			break;
+		msleep(100);
+	}
 
-	it913x_config.chip_ver = data[0];
+	if (ver < 1 || ver > 2) {
+		info("Failed to identify chip version applying 1");
+		it913x_config.chip_ver = 0x1;
+		it913x_config.chip_type = 0x9135;
+		return 0;
+	}
+
+	it913x_config.chip_ver = ver;
 	it913x_config.chip_type = (u16)(data[2] << 8) + data[1];
 
 	info("Chip Version=%02x Chip Type=%04x", it913x_config.chip_ver,
@@ -660,30 +675,41 @@ static int it913x_download_firmware(struct usb_device *udev,
 			if ((packet_size > min_pkt) || (i == fw->size)) {
 				fw_data = (u8 *)(fw->data + pos);
 				pos += packet_size;
-				if (packet_size > 0)
-					ret |= it913x_io(udev, WRITE_DATA,
+				if (packet_size > 0) {
+					ret = it913x_io(udev, WRITE_DATA,
 						DEV_0, CMD_SCATTER_WRITE, 0,
 						0, fw_data, packet_size);
+					if (ret < 0)
+						break;
+				}
 				udelay(1000);
 			}
 		}
 		i++;
 	}
 
-	ret |= it913x_io(udev, WRITE_CMD, DEV_0, CMD_BOOT, 0, 0, NULL, 0);
-
-	msleep(100);
-
 	if (ret < 0)
-		info("FRM Firmware Download Failed (%04x)" , ret);
+		info("FRM Firmware Download Failed (%d)" , ret);
 	else
 		info("FRM Firmware Download Completed - Resetting Device");
 
-	ret |= it913x_return_status(udev);
+	msleep(30);
+
+	ret = it913x_io(udev, WRITE_CMD, DEV_0, CMD_BOOT, 0, 0, NULL, 0);
+	if (ret < 0)
+		info("FRM Device not responding to reboot");
+
+	ret = it913x_return_status(udev);
+	if (ret == 0) {
+		info("FRM Failed to reboot device");
+		return -ENODEV;
+	}
 
 	msleep(30);
 
-	ret |= it913x_wr_reg(udev, DEV_0,  I2C_CLK, I2C_CLK_400);
+	ret = it913x_wr_reg(udev, DEV_0,  I2C_CLK, I2C_CLK_400);
+
+	msleep(30);
 
 	/* Tuner function */
 	if (it913x_config.dual_mode)
@@ -901,5 +927,5 @@ module_usb_driver(it913x_driver);
 
 MODULE_AUTHOR("Malcolm Priestley <tvboxspy@gmail.com>");
 MODULE_DESCRIPTION("it913x USB 2 Driver");
-MODULE_VERSION("1.27");
+MODULE_VERSION("1.28");
 MODULE_LICENSE("GPL");
diff --git a/drivers/media/video/ivtv/ivtv-ioctl.c b/drivers/media/video/ivtv/ivtv-ioctl.c
index 5452beef8e1..989e556913e 100644
--- a/drivers/media/video/ivtv/ivtv-ioctl.c
+++ b/drivers/media/video/ivtv/ivtv-ioctl.c
@@ -1763,13 +1763,13 @@ static int ivtv_decoder_ioctls(struct file *filp, unsigned int cmd, void *arg)
 		IVTV_DEBUG_IOCTL("AUDIO_CHANNEL_SELECT\n");
 		if (iarg > AUDIO_STEREO_SWAPPED)
 			return -EINVAL;
-		return v4l2_ctrl_s_ctrl(itv->ctrl_audio_playback, iarg);
+		return v4l2_ctrl_s_ctrl(itv->ctrl_audio_playback, iarg + 1);
 
 	case AUDIO_BILINGUAL_CHANNEL_SELECT:
 		IVTV_DEBUG_IOCTL("AUDIO_BILINGUAL_CHANNEL_SELECT\n");
 		if (iarg > AUDIO_STEREO_SWAPPED)
 			return -EINVAL;
-		return v4l2_ctrl_s_ctrl(itv->ctrl_audio_multilingual_playback, iarg);
+		return v4l2_ctrl_s_ctrl(itv->ctrl_audio_multilingual_playback, iarg + 1);
 
 	default:
 		return -EINVAL;
diff --git a/drivers/media/video/uvc/uvc_video.c b/drivers/media/video/uvc/uvc_video.c
index 4a44f9a1bae..b76b0ac0958 100644
--- a/drivers/media/video/uvc/uvc_video.c
+++ b/drivers/media/video/uvc/uvc_video.c
@@ -468,22 +468,30 @@ uvc_video_clock_decode(struct uvc_streaming *stream, struct uvc_buffer *buf,
 	spin_unlock_irqrestore(&stream->clock.lock, flags);
 }
 
-static int uvc_video_clock_init(struct uvc_streaming *stream)
+static void uvc_video_clock_reset(struct uvc_streaming *stream)
 {
 	struct uvc_clock *clock = &stream->clock;
 
-	spin_lock_init(&clock->lock);
 	clock->head = 0;
 	clock->count = 0;
-	clock->size = 32;
 	clock->last_sof = -1;
 	clock->sof_offset = -1;
+}
+
+static int uvc_video_clock_init(struct uvc_streaming *stream)
+{
+	struct uvc_clock *clock = &stream->clock;
+
+	spin_lock_init(&clock->lock);
+	clock->size = 32;
 
 	clock->samples = kmalloc(clock->size * sizeof(*clock->samples),
 				 GFP_KERNEL);
 	if (clock->samples == NULL)
 		return -ENOMEM;
 
+	uvc_video_clock_reset(stream);
+
 	return 0;
 }
 
@@ -1424,8 +1432,6 @@ static void uvc_uninit_video(struct uvc_streaming *stream, int free_buffers)
 
 	if (free_buffers)
 		uvc_free_urb_buffers(stream);
-
-	uvc_video_clock_cleanup(stream);
 }
 
 /*
@@ -1555,10 +1561,6 @@ static int uvc_init_video(struct uvc_streaming *stream, gfp_t gfp_flags)
 
 	uvc_video_stats_start(stream);
 
-	ret = uvc_video_clock_init(stream);
-	if (ret < 0)
-		return ret;
-
 	if (intf->num_altsetting > 1) {
 		struct usb_host_endpoint *best_ep = NULL;
 		unsigned int best_psize = 3 * 1024;
@@ -1683,6 +1685,8 @@ int uvc_video_resume(struct uvc_streaming *stream, int reset)
 
 	stream->frozen = 0;
 
+	uvc_video_clock_reset(stream);
+
 	ret = uvc_commit_video(stream, &stream->ctrl);
 	if (ret < 0) {
 		uvc_queue_enable(&stream->queue, 0);
@@ -1819,25 +1823,35 @@ int uvc_video_enable(struct uvc_streaming *stream, int enable)
 		uvc_uninit_video(stream, 1);
 		usb_set_interface(stream->dev->udev, stream->intfnum, 0);
 		uvc_queue_enable(&stream->queue, 0);
+		uvc_video_clock_cleanup(stream);
 		return 0;
 	}
 
-	ret = uvc_queue_enable(&stream->queue, 1);
+	ret = uvc_video_clock_init(stream);
 	if (ret < 0)
 		return ret;
 
+	ret = uvc_queue_enable(&stream->queue, 1);
+	if (ret < 0)
+		goto error_queue;
+
 	/* Commit the streaming parameters. */
 	ret = uvc_commit_video(stream, &stream->ctrl);
-	if (ret < 0) {
-		uvc_queue_enable(&stream->queue, 0);
-		return ret;
-	}
+	if (ret < 0)
+		goto error_commit;
 
 	ret = uvc_init_video(stream, GFP_KERNEL);
-	if (ret < 0) {
-		usb_set_interface(stream->dev->udev, stream->intfnum, 0);
-		uvc_queue_enable(&stream->queue, 0);
-	}
+	if (ret < 0)
+		goto error_video;
+
+	return 0;
+
+error_video:
+	usb_set_interface(stream->dev->udev, stream->intfnum, 0);
+error_commit:
+	uvc_queue_enable(&stream->queue, 0);
+error_queue:
+	uvc_video_clock_cleanup(stream);
 
 	return ret;
 }