diff options
author | Andy Walls <awalls@radix.net> | 2009-01-31 00:33:02 -0300 |
---|---|---|
committer | Mauro Carvalho Chehab <mchehab@redhat.com> | 2009-03-30 12:42:38 -0300 |
commit | 302df9702192a68578916ef922c33370cbba350d (patch) | |
tree | eab3173a4b82ec26c89b82c50e9bfb0fe2477953 /drivers/media | |
parent | 4325dff220918c2ced82d16c3475d9a5afb1cab3 (diff) |
V4L/DVB (10439): cx18: Clean-up and enable sliced VBI handling
Removed legacy ivtv state variables, added comments, and cleaned
up sliced VBI related code. Enabled sliced VBI.
Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Diffstat (limited to 'drivers/media')
-rw-r--r-- | drivers/media/video/cx18/cx18-av-core.c | 11 | ||||
-rw-r--r-- | drivers/media/video/cx18/cx18-av-vbi.c | 92 | ||||
-rw-r--r-- | drivers/media/video/cx18/cx18-cards.c | 8 | ||||
-rw-r--r-- | drivers/media/video/cx18/cx18-cards.h | 3 | ||||
-rw-r--r-- | drivers/media/video/cx18/cx18-controls.c | 4 | ||||
-rw-r--r-- | drivers/media/video/cx18/cx18-driver.c | 49 | ||||
-rw-r--r-- | drivers/media/video/cx18/cx18-driver.h | 142 | ||||
-rw-r--r-- | drivers/media/video/cx18/cx18-fileops.c | 54 | ||||
-rw-r--r-- | drivers/media/video/cx18/cx18-ioctl.c | 77 | ||||
-rw-r--r-- | drivers/media/video/cx18/cx18-streams.c | 45 | ||||
-rw-r--r-- | drivers/media/video/cx18/cx18-vbi.c | 58 |
11 files changed, 383 insertions, 160 deletions
diff --git a/drivers/media/video/cx18/cx18-av-core.c b/drivers/media/video/cx18/cx18-av-core.c index 091f0cac063..1d197649446 100644 --- a/drivers/media/video/cx18/cx18-av-core.c +++ b/drivers/media/video/cx18/cx18-av-core.c @@ -169,9 +169,14 @@ static void cx18_av_initialize(struct cx18 *cx) /* Set VGA_TRACK_RANGE to 0x20 */ cx18_av_and_or4(cx, CXADEC_DFE_CTRL2, 0xFFFF00FF, 0x00002000); - /* Enable VBI capture */ - cx18_av_write4(cx, CXADEC_OUT_CTRL1, 0x4010253F); - /* cx18_av_write4(cx, CXADEC_OUT_CTRL1, 0x4010253E); */ + /* + * Initial VBI setup + * VIP-1.1, 10 bit mode, enable Raw, disable sliced, + * don't clamp raw samples when codes are in use, 4 byte user D-words, + * programmed IDID, RP code V bit transition on VBLANK, data during + * blanking intervals + */ + cx18_av_write4(cx, CXADEC_OUT_CTRL1, 0x4010252e); /* Set the video input. The setting in MODE_CTRL gets lost when we do the above setup */ diff --git a/drivers/media/video/cx18/cx18-av-vbi.c b/drivers/media/video/cx18/cx18-av-vbi.c index 1527ea4f6b0..72325d774a6 100644 --- a/drivers/media/video/cx18/cx18-av-vbi.c +++ b/drivers/media/video/cx18/cx18-av-vbi.c @@ -24,6 +24,52 @@ #include "cx18-driver.h" +/* + * For sliced VBI output, we set up to use VIP-1.1, 10-bit mode, + * NN counts 4 bytes Dwords, an IDID of 0x00 0x80 or one with the VBI line #. + * Thus, according to the VIP-2 Spec, our VBI ancillary data lines + * (should!) look like: + * 4 byte EAV code: 0xff 0x00 0x00 0xRP + * unknown number of possible idle bytes + * 3 byte Anc data preamble: 0x00 0xff 0xff + * 1 byte data identifier: ne010iii (parity bits, 010, DID bits) + * 1 byte secondary data id: nessssss (parity bits, SDID bits) + * 1 byte data word count: necccccc (parity bits, NN Dword count) + * 2 byte Internal DID: 0x00 0x80 (programmed value) + * 4*NN data bytes + * 1 byte checksum + * Fill bytes needed to fil out to 4*NN bytes of payload + * + * The RP codes for EAVs when in VIP-1.1 mode, not in raw mode, & + * in the vertical blanking interval are: + * 0xb0 (Task 0 VerticalBlank HorizontalBlank 0 0 0 0) + * 0xf0 (Task EvenField VerticalBlank HorizontalBlank 0 0 0 0) + * + * Since the V bit is only allowed to toggle in the EAV RP code, just + * before the first active region line and for active lines, they are: + * 0x90 (Task 0 0 HorizontalBlank 0 0 0 0) + * 0xd0 (Task EvenField 0 HorizontalBlank 0 0 0 0) + * + * The user application DID bytes we care about are: + * 0x91 (1 0 010 0 !ActiveLine AncDataPresent) + * 0x55 (0 1 010 2ndField !ActiveLine AncDataPresent) + * + */ +static const u8 sliced_vbi_did[2] = { 0x91, 0x55 }; + +struct vbi_anc_data { + /* u8 eav[4]; */ + /* u8 idle[]; Variable number of idle bytes */ + u8 preamble[3]; + u8 did; + u8 sdid; + u8 data_count; + u8 idid[2]; + u8 payload[1]; /* 4*data_count of payload */ + /* u8 checksum; */ + /* u8 fill[]; Variable number of fill bytes */ +}; + static int odd_parity(u8 c) { c ^= (c >> 4); @@ -96,7 +142,7 @@ int cx18_av_vbi(struct cx18 *cx, unsigned int cmd, void *arg) 0, V4L2_SLICED_TELETEXT_B, 0, /* 1 */ 0, V4L2_SLICED_WSS_625, 0, /* 4 */ V4L2_SLICED_CAPTION_525, /* 6 */ - 0, 0, V4L2_SLICED_VPS, 0, 0, /* 9 */ + V4L2_SLICED_VPS, 0, 0, 0, 0, /* 7 - unlike cx25840 */ 0, 0, 0, 0 }; int is_pal = !(state->std & V4L2_STD_525_60); @@ -220,47 +266,53 @@ int cx18_av_vbi(struct cx18 *cx, unsigned int cmd, void *arg) case VIDIOC_INT_DECODE_VBI_LINE: { struct v4l2_decode_vbi_line *vbi = arg; - u8 *p = vbi->p; - int id1, id2, l, err = 0; - - if (p[0] || p[1] != 0xff || p[2] != 0xff || - (p[3] != 0x55 && p[3] != 0x91)) { + u8 *p; + struct vbi_anc_data *anc = (struct vbi_anc_data *) vbi->p; + int did, sdid, l, err = 0; + + /* + * Check for the ancillary data header for sliced VBI + */ + if (anc->preamble[0] || + anc->preamble[1] != 0xff || anc->preamble[2] != 0xff || + (anc->did != sliced_vbi_did[0] && + anc->did != sliced_vbi_did[1])) { vbi->line = vbi->type = 0; break; } - p += 4; - id1 = p[-1]; - id2 = p[0] & 0xf; - l = p[2] & 0x3f; + did = anc->did; + sdid = anc->sdid & 0xf; + l = anc->idid[0] & 0x3f; l += state->vbi_line_offset; - p += 4; + p = anc->payload; - switch (id2) { + /* Decode the SDID set by the slicer */ + switch (sdid) { case 1: - id2 = V4L2_SLICED_TELETEXT_B; + sdid = V4L2_SLICED_TELETEXT_B; break; case 4: - id2 = V4L2_SLICED_WSS_625; + sdid = V4L2_SLICED_WSS_625; break; case 6: - id2 = V4L2_SLICED_CAPTION_525; + sdid = V4L2_SLICED_CAPTION_525; err = !odd_parity(p[0]) || !odd_parity(p[1]); break; - case 9: - id2 = V4L2_SLICED_VPS; + case 7: /* Differs from cx25840 */ + sdid = V4L2_SLICED_VPS; if (decode_vps(p, p) != 0) err = 1; break; default: - id2 = 0; + sdid = 0; err = 1; break; } - vbi->type = err ? 0 : id2; + vbi->type = err ? 0 : sdid; vbi->line = err ? 0 : l; - vbi->is_second_field = err ? 0 : (id1 == 0x55); + vbi->is_second_field = err ? 0 : (did == sliced_vbi_did[1]); vbi->p = p; break; } diff --git a/drivers/media/video/cx18/cx18-cards.c b/drivers/media/video/cx18/cx18-cards.c index a0d4d2e49d1..6e2105ac2bc 100644 --- a/drivers/media/video/cx18/cx18-cards.c +++ b/drivers/media/video/cx18/cx18-cards.c @@ -51,7 +51,7 @@ static struct cx18_card_tuner_i2c cx18_i2c_std = { static const struct cx18_card cx18_card_hvr1600_esmt = { .type = CX18_CARD_HVR_1600_ESMT, .name = "Hauppauge HVR-1600", - .comment = "Raw VBI supported; Sliced VBI is not yet supported\n", + .comment = "Simultaneous Digital and Analog TV capture supported\n", .v4l2_capabilities = CX18_CAP_ENCODER, .hw_audio_ctrl = CX18_HW_CX23418, .hw_muxer = CX18_HW_CS5345, @@ -97,7 +97,7 @@ static const struct cx18_card cx18_card_hvr1600_esmt = { static const struct cx18_card cx18_card_hvr1600_samsung = { .type = CX18_CARD_HVR_1600_SAMSUNG, .name = "Hauppauge HVR-1600 (Preproduction)", - .comment = "Raw VBI supported; Sliced VBI is not yet supported\n", + .comment = "Simultaneous Digital and Analog TV capture supported\n", .v4l2_capabilities = CX18_CAP_ENCODER, .hw_audio_ctrl = CX18_HW_CX23418, .hw_muxer = CX18_HW_CS5345, @@ -152,7 +152,7 @@ static const struct cx18_card_pci_info cx18_pci_h900[] = { static const struct cx18_card cx18_card_h900 = { .type = CX18_CARD_COMPRO_H900, .name = "Compro VideoMate H900", - .comment = "Raw VBI supported; Sliced VBI is not yet supported\n", + .comment = "Analog TV capture supported\n", .v4l2_capabilities = CX18_CAP_ENCODER, .hw_audio_ctrl = CX18_HW_CX23418, .hw_all = CX18_HW_TUNER, @@ -249,7 +249,7 @@ static const struct cx18_card_pci_info cx18_pci_cnxt_raptor_pal[] = { static const struct cx18_card cx18_card_cnxt_raptor_pal = { .type = CX18_CARD_CNXT_RAPTOR_PAL, .name = "Conexant Raptor PAL/SECAM", - .comment = "Raw VBI supported; Sliced VBI is not yet supported\n", + .comment = "Analog TV capture supported\n", .v4l2_capabilities = CX18_CAP_ENCODER, .hw_audio_ctrl = CX18_HW_CX23418, .hw_muxer = CX18_HW_GPIO, diff --git a/drivers/media/video/cx18/cx18-cards.h b/drivers/media/video/cx18/cx18-cards.h index 6fa7bcb42dd..f8ee29f102d 100644 --- a/drivers/media/video/cx18/cx18-cards.h +++ b/drivers/media/video/cx18/cx18-cards.h @@ -49,8 +49,7 @@ /* V4L2 capability aliases */ #define CX18_CAP_ENCODER (V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_TUNER | \ V4L2_CAP_AUDIO | V4L2_CAP_READWRITE | \ - V4L2_CAP_VBI_CAPTURE) -/* | V4L2_CAP_SLICED_VBI_CAPTURE) not yet */ + V4L2_CAP_VBI_CAPTURE | V4L2_CAP_SLICED_VBI_CAPTURE) struct cx18_card_video_input { u8 video_type; /* video input type */ diff --git a/drivers/media/video/cx18/cx18-controls.c b/drivers/media/video/cx18/cx18-controls.c index 17edf305d64..6af4d5c190e 100644 --- a/drivers/media/video/cx18/cx18-controls.c +++ b/drivers/media/video/cx18/cx18-controls.c @@ -178,8 +178,8 @@ static int cx18_setup_vbi_fmt(struct cx18 *cx, enum v4l2_mpeg_stream_vbi_fmt fmt int i; for (i = 0; i < CX18_VBI_FRAMES; i++) { - /* Yuck, hardcoded. Needs to be a define */ - cx->vbi.sliced_mpeg_data[i] = kmalloc(2049, GFP_KERNEL); + cx->vbi.sliced_mpeg_data[i] = + kmalloc(CX18_SLICED_MPEG_DATA_BUFSZ, GFP_KERNEL); if (cx->vbi.sliced_mpeg_data[i] == NULL) { while (--i >= 0) { kfree(cx->vbi.sliced_mpeg_data[i]); diff --git a/drivers/media/video/cx18/cx18-driver.c b/drivers/media/video/cx18/cx18-driver.c index 062f1910e8d..842ce636e45 100644 --- a/drivers/media/video/cx18/cx18-driver.c +++ b/drivers/media/video/cx18/cx18-driver.c @@ -586,7 +586,8 @@ static int __devinit cx18_init_struct1(struct cx18 *cx) (cx->params.video_temporal_filter_mode << 1) | (cx->params.video_median_filter_type << 2); cx->params.port = CX2341X_PORT_MEMORY; - cx->params.capabilities = CX2341X_CAP_HAS_TS | CX2341X_CAP_HAS_AC3; + cx->params.capabilities = + CX2341X_CAP_HAS_TS | CX2341X_CAP_HAS_AC3 | CX2341X_CAP_HAS_SLICED_VBI; init_waitqueue_head(&cx->cap_w); init_waitqueue_head(&cx->mb_apu_waitq); init_waitqueue_head(&cx->mb_cpu_waitq); @@ -596,49 +597,6 @@ static int __devinit cx18_init_struct1(struct cx18 *cx) cx->vbi.in.type = V4L2_BUF_TYPE_VBI_CAPTURE; cx->vbi.sliced_in = &cx->vbi.in.fmt.sliced; - /* - * The VBI line sizes depend on the pixel clock and the horiz rate - * - * (1/Fh)*(2*Fp) = Samples/line - * = 4 bytes EAV + Anc data in hblank + 4 bytes SAV + active samples - * - * Sliced VBI is sent as ancillary data during horizontal blanking - * Raw VBI is sent as active video samples during vertcal blanking - * - * We use a BT.656 pxiel clock of 13.5 MHz and a BT.656 active line - * length of 720 pixels @ 4:2:2 sampling. Thus... - * - * For systems that use a 15.734 kHz horizontal rate, such as - * NTSC-M, PAL-M, PAL-60, and other 60 Hz/525 line systems, we have: - * - * (1/15.734 kHz) * 2 * 13.5 MHz = 1716 samples/line = - * 4 bytes SAV + 268 bytes anc data + 4 bytes SAV + 1440 active samples - * - * For systems that use a 15.625 kHz horizontal rate, such as - * PAL-B/G/H, PAL-I, SECAM-L and other 50 Hz/625 line systems, we have: - * - * (1/15.625 kHz) * 2 * 13.5 MHz = 1728 samples/line = - * 4 bytes SAV + 280 bytes anc data + 4 bytes SAV + 1440 active samples - * - */ - - /* FIXME: init these based on tuner std & modify when std changes */ - /* CX18-AV-Core number of VBI samples output per horizontal line */ - cx->vbi.raw_decoder_line_size = 1444; /* 4 byte SAV + 2 * 720 */ - cx->vbi.sliced_decoder_line_size = 272; /* 60 Hz: 268+4, 50 Hz: 280+4 */ - - /* CX18-AV-Core VBI samples/line possibly rounded up */ - cx->vbi.raw_size = 1444; /* Real max size is 1444 */ - cx->vbi.sliced_size = 284; /* Real max size is 284 */ - - /* - * CX18-AV-Core SAV/EAV RP codes in VIP 1.x mode - * Task Field VerticalBlank HorizontalBlank 0 0 0 0 - */ - cx->vbi.raw_decoder_sav_odd_field = 0x20; /* V */ - cx->vbi.raw_decoder_sav_even_field = 0x60; /* FV */ - cx->vbi.sliced_decoder_sav_odd_field = 0xB0; /* T VH - actually EAV */ - cx->vbi.sliced_decoder_sav_even_field = 0xF0; /* TFVH - actually EAV */ return 0; } @@ -671,7 +629,6 @@ static void __devinit cx18_init_struct2(struct cx18 *cx) cx->av_state.aud_input = CX18_AV_AUDIO8; cx->av_state.audclk_freq = 48000; cx->av_state.audmode = V4L2_TUNER_MODE_LANG1; - /* FIXME - 8 is NTSC value, investigate */ cx->av_state.vbi_line_offset = 8; } @@ -936,7 +893,7 @@ static int __devinit cx18_probe(struct pci_dev *pci_dev, * suboptimal, as the CVBS and SVideo inputs could use a different std * and the buffer could end up being too small in that case. */ - vbi_buf_size = cx->vbi.raw_size * (cx->is_60hz ? 24 : 36) / 2; + vbi_buf_size = vbi_active_samples * (cx->is_60hz ? 24 : 36) / 2; cx->stream_buf_size[CX18_ENC_STREAM_TYPE_VBI] = vbi_buf_size; if (cx->stream_buffers[CX18_ENC_STREAM_TYPE_VBI] < 0) diff --git a/drivers/media/video/cx18/cx18-driver.h b/drivers/media/video/cx18/cx18-driver.h index d95c6ace2b9..a41d9c4178f 100644 --- a/drivers/media/video/cx18/cx18-driver.h +++ b/drivers/media/video/cx18/cx18-driver.h @@ -319,59 +319,121 @@ struct cx18_open_id { /* forward declaration of struct defined in cx18-cards.h */ struct cx18_card; +/* + * A note about "sliced" VBI data as implemented in this driver: + * + * Currently we collect the sliced VBI in the form of Ancillary Data + * packets, inserted by the AV core decoder/digitizer/slicer in the + * horizontal blanking region of the VBI lines, in "raw" mode as far as + * the Encoder is concerned. We don't ever tell the Encoder itself + * to provide sliced VBI. (AV Core: sliced mode - Encoder: raw mode) + * + * We then process the ancillary data ourselves to send the sliced data + * to the user application directly or build up MPEG-2 private stream 1 + * packets to splice into (only!) MPEG-2 PS streams for the user app. + * + * (That's how ivtv essentially does it.) + * + * The Encoder should be able to extract certain sliced VBI data for + * us and provide it in a separate stream or splice it into any type of + * MPEG PS or TS stream, but this isn't implemented yet. + */ + +/* + * Number of "raw" VBI samples per horizontal line we tell the Encoder to + * grab from the decoder/digitizer/slicer output for raw or sliced VBI. + * It depends on the pixel clock and the horiz rate: + * + * (1/Fh)*(2*Fp) = Samples/line + * = 4 bytes EAV + Anc data in hblank + 4 bytes SAV + active samples + * + * Sliced VBI data is sent as ancillary data during horizontal blanking + * Raw VBI is sent as active video samples during vertcal blanking + * + * We use a BT.656 pxiel clock of 13.5 MHz and a BT.656 active line + * length of 720 pixels @ 4:2:2 sampling. Thus... + * + * For systems that use a 15.734 kHz horizontal rate, such as + * NTSC-M, PAL-M, PAL-60, and other 60 Hz/525 line systems, we have: + * + * (1/15.734 kHz) * 2 * 13.5 MHz = 1716 samples/line = + * 4 bytes SAV + 268 bytes anc data + 4 bytes SAV + 1440 active samples + * + * For systems that use a 15.625 kHz horizontal rate, such as + * PAL-B/G/H, PAL-I, SECAM-L and other 50 Hz/625 line systems, we have: + * + * (1/15.625 kHz) * 2 * 13.5 MHz = 1728 samples/line = + * 4 bytes SAV + 280 bytes anc data + 4 bytes SAV + 1440 active samples + */ +static const u32 vbi_active_samples = 1444; /* 4 byte SAV + 720 Y + 720 U/V */ +static const u32 vbi_hblank_samples_60Hz = 272; /* 4 byte EAV + 268 anc/fill */ +static const u32 vbi_hblank_samples_50Hz = 284; /* 4 byte EAV + 280 anc/fill */ #define CX18_VBI_FRAMES 32 -/* VBI data */ struct vbi_info { - u32 enc_size; - u32 frame; - u8 cc_data_odd[256]; - u8 cc_data_even[256]; - int cc_pos; - u8 cc_no_update; - u8 vps[5]; - u8 vps_found; - int wss; - u8 wss_found; - u8 wss_no_update; - u32 raw_decoder_line_size; - u8 raw_decoder_sav_odd_field; - u8 raw_decoder_sav_even_field; - u32 sliced_decoder_line_size; - u8 sliced_decoder_sav_odd_field; - u8 sliced_decoder_sav_even_field; + /* Current state of v4l2 VBI settings for this device */ struct v4l2_format in; - /* convenience pointer to sliced struct in vbi_in union */ - struct v4l2_sliced_vbi_format *sliced_in; - u32 service_set_in; - int insert_mpeg; + struct v4l2_sliced_vbi_format *sliced_in; /* pointer to in.fmt.sliced */ + u32 count; /* Count of VBI data lines: 60 Hz: 12 or 50 Hz: 18 */ + u32 start[2]; /* First VBI data line per field: 10 & 273 or 6 & 318 */ - /* Buffer for the maximum of 2 * 18 * packet_size sliced VBI lines. - One for /dev/vbi0 and one for /dev/vbi8 */ - struct v4l2_sliced_vbi_data sliced_data[36]; + u32 frame; /* Count of VBI buffers/frames received from Encoder */ - /* Buffer for VBI data inserted into MPEG stream. - The first byte is a dummy byte that's never used. - The next 16 bytes contain the MPEG header for the VBI data, - the remainder is the actual VBI data. - The max size accepted by the MPEG VBI reinsertion turns out - to be 1552 bytes, which happens to be 4 + (1 + 42) * (2 * 18) bytes, - where 4 is a four byte header, 42 is the max sliced VBI payload, 1 is - a single line header byte and 2 * 18 is the number of VBI lines per frame. + /* + * Vars for creation and insertion of MPEG Private Stream 1 packets + * of sliced VBI data into an MPEG PS + */ - However, it seems that the data must be 1K aligned, so we have to - pad the data until the 1 or 2 K boundary. + /* Boolean: create and insert Private Stream 1 packets into the PS */ + int insert_mpeg; + + /* + * Buffer for the maximum of 2 * 18 * packet_size sliced VBI lines. + * Used in cx18-vbi.c only for collecting sliced data, and as a source + * during conversion of sliced VBI data into MPEG Priv Stream 1 packets. + * We don't need to save state here, but the array may have been a bit + * too big (2304 bytes) to alloc from the stack. + */ + struct v4l2_sliced_vbi_data sliced_data[36]; - This pointer array will allocate 2049 bytes to store each VBI frame. */ + /* + * A ring buffer of driver-generated MPEG-2 PS + * Program Pack/Private Stream 1 packets for sliced VBI data insertion + * into the MPEG PS stream. + * + * In each sliced_mpeg_data[] buffer is: + * 16 byte MPEG-2 PS Program Pack Header + * 16 byte MPEG-2 Private Stream 1 PES Header + * 4 byte magic number: "itv0" or "ITV0" + * 4 byte first field line mask, if "itv0" + * 4 byte second field line mask, if "itv0" + * 36 lines, if "ITV0"; or <36 lines, if "itv0"; of sliced VBI data + * + * Each line in the payload is + * 1 byte line header derived from the SDID (WSS, CC, VPS, etc.) + * 42 bytes of line data + * + * That's a maximum 1552 bytes of payload in the Private Stream 1 packet + * which is the payload size a PVR-350 (CX23415) MPEG decoder will + * accept for VBI data. So, including the headers, it's a maximum 1584 + * bytes total. + */ +#define CX18_SLICED_MPEG_DATA_MAXSZ 1584 + /* copy_vbi_buf() needs 8 temp bytes on the end for the worst case */ +#define CX18_SLICED_MPEG_DATA_BUFSZ (CX18_SLICED_MPEG_DATA_MAXSZ+8) u8 *sliced_mpeg_data[CX18_VBI_FRAMES]; u32 sliced_mpeg_size[CX18_VBI_FRAMES]; - struct cx18_buffer sliced_mpeg_buf; + + /* Count of Program Pack/Program Stream 1 packets inserted into PS */ u32 inserted_frame; - u32 start[2], count; - u32 raw_size; - u32 sliced_size; + /* + * A dummy driver stream transfer buffer with a copy of the next + * sliced_mpeg_data[] buffer for output to userland apps. + * Only used in cx18-fileops.c, but its state needs to persist at times. + */ + struct cx18_buffer sliced_mpeg_buf; }; /* Per cx23418, per I2C bus private algo callback data */ diff --git a/drivers/media/video/cx18/cx18-fileops.c b/drivers/media/video/cx18/cx18-fileops.c index 23006f7d915..0b1dbc67e1a 100644 --- a/drivers/media/video/cx18/cx18-fileops.c +++ b/drivers/media/video/cx18/cx18-fileops.c @@ -176,6 +176,8 @@ static struct cx18_buffer *cx18_get_buffer(struct cx18_stream *s, int non_block, *err = 0; while (1) { if (s->type == CX18_ENC_STREAM_TYPE_MPG) { + /* Process pending program info updates and pending + VBI data */ if (time_after(jiffies, cx->dualwatch_jiffies + msecs_to_jiffies(1000))) { cx->dualwatch_jiffies = jiffies; @@ -260,6 +262,20 @@ static size_t cx18_copy_buf_to_user(struct cx18_stream *s, len = ucount; if (cx->vbi.insert_mpeg && s->type == CX18_ENC_STREAM_TYPE_MPG && !cx18_raw_vbi(cx) && buf != &cx->vbi.sliced_mpeg_buf) { + /* + * Try to find a good splice point in the PS, just before + * an MPEG-2 Program Pack start code, and provide only + * up to that point to the user, so it's easy to insert VBI data + * the next time around. + */ + /* FIXME - This only works for an MPEG-2 PS, not a TS */ + /* + * An MPEG-2 Program Stream (PS) is a series of + * MPEG-2 Program Packs terminated by an + * MPEG Program End Code after the last Program Pack. + * A Program Pack may hold a PS System Header packet and any + * number of Program Elementary Stream (PES) Packets + */ const char *start = buf->buf + buf->readpos; const char *p = start + 1; const u8 *q; @@ -267,38 +283,54 @@ static size_t cx18_copy_buf_to_user(struct cx18_stream *s, int stuffing, i; while (start + len > p) { + /* Scan for a 0 to find a potential MPEG-2 start code */ q = memchr(p, 0, start + len - p); if (q == NULL) break; p = q + 1; + /* + * Keep looking if not a + * MPEG-2 Pack header start code: 0x00 0x00 0x01 0xba + * or MPEG-2 video PES start code: 0x00 0x00 0x01 0xe0 + */ if ((char *)q + 15 >= buf->buf + buf->bytesused || q[1] != 0 || q[2] != 1 || q[3] != ch) continue; + + /* If expecting the primary video PES */ if (!cx->search_pack_header) { + /* Continue if it couldn't be a PES packet */ if ((q[6] & 0xc0) != 0x80) continue; - if (((q[7] & 0xc0) == 0x80 && - (q[9] & 0xf0) == 0x20) || - ((q[7] & 0xc0) == 0xc0 && - (q[9] & 0xf0) == 0x30)) { - ch = 0xba; + /* Check if a PTS or PTS & DTS follow */ + if (((q[7] & 0xc0) == 0x80 && /* PTS only */ + (q[9] & 0xf0) == 0x20) || /* PTS only */ + ((q[7] & 0xc0) == 0xc0 && /* PTS & DTS */ + (q[9] & 0xf0) == 0x30)) { /* DTS follows */ + /* Assume we found the video PES hdr */ + ch = 0xba; /* next want a Program Pack*/ cx->search_pack_header = 1; - p = q + 9; + p = q + 9; /* Skip this video PES hdr */ } continue; } + + /* We may have found a Program Pack start code */ + + /* Get the count of stuffing bytes & verify them */ stuffing = q[13] & 7; /* all stuffing bytes must be 0xff */ for (i = 0; i < stuffing; i++) if (q[14 + i] != 0xff) break; - if (i == stuffing && - (q[4] & 0xc4) == 0x44 && - (q[12] & 3) == 3 && - q[14 + stuffing] == 0 && + if (i == stuffing && /* right number of stuffing bytes*/ + (q[4] & 0xc4) == 0x44 && /* marker check */ + (q[12] & 3) == 3 && /* marker check */ + q[14 + stuffing] == 0 && /* PES Pack or Sys Hdr */ q[15 + stuffing] == 0 && q[16 + stuffing] == 1) { - cx->search_pack_header = 0; + /* We declare we actually found a Program Pack*/ + cx->search_pack_header = 0; /* expect vid PES */ len = (char *)q - start; cx18_setup_sliced_vbi_buf(cx); break; diff --git a/drivers/media/video/cx18/cx18-ioctl.c b/drivers/media/video/cx18/cx18-ioctl.c index 20467fce525..1adb9722092 100644 --- a/drivers/media/video/cx18/cx18-ioctl.c +++ b/drivers/media/video/cx18/cx18-ioctl.c @@ -102,6 +102,19 @@ void cx18_expand_service_set(struct v4l2_sliced_vbi_format *fmt, int is_pal) } } +static int check_service_set(struct v4l2_sliced_vbi_format *fmt, int is_pal) +{ + int f, l; + u16 set = 0; + + for (f = 0; f < 2; f++) { + for (l = 0; l < 24; l++) { + fmt->service_lines[f][l] = select_service_from_set(f, l, fmt->service_lines[f][l], is_pal); + set |= fmt->service_lines[f][l]; + } + } + return set != 0; +} u16 cx18_get_service_set(struct v4l2_sliced_vbi_format *fmt) { @@ -150,7 +163,7 @@ static int cx18_g_fmt_vbi_cap(struct file *file, void *fh, vbifmt->sampling_rate = 27000000; vbifmt->offset = 248; - vbifmt->samples_per_line = cx->vbi.raw_decoder_line_size - 4; + vbifmt->samples_per_line = vbi_active_samples - 4; vbifmt->sample_format = V4L2_PIX_FMT_GREY; vbifmt->start[0] = cx->vbi.start[0]; vbifmt->start[1] = cx->vbi.start[1]; @@ -164,7 +177,17 @@ static int cx18_g_fmt_vbi_cap(struct file *file, void *fh, static int cx18_g_fmt_sliced_vbi_cap(struct file *file, void *fh, struct v4l2_format *fmt) { - return -EINVAL; + struct cx18 *cx = ((struct cx18_open_id *)fh)->cx; + struct v4l2_sliced_vbi_format *vbifmt = &fmt->fmt.sliced; + + vbifmt->reserved[0] = 0; + vbifmt->reserved[1] = 0; + vbifmt->io_size = sizeof(struct v4l2_sliced_vbi_data) * 36; + memset(vbifmt->service_lines, 0, sizeof(vbifmt->service_lines)); + + cx18_av_cmd(cx, VIDIOC_G_FMT, fmt); + vbifmt->service_set = cx18_get_service_set(vbifmt); + return 0; } static int cx18_try_fmt_vid_cap(struct file *file, void *fh, @@ -194,7 +217,18 @@ static int cx18_try_fmt_vbi_cap(struct file *file, void *fh, static int cx18_try_fmt_sliced_vbi_cap(struct file *file, void *fh, struct v4l2_format *fmt) { - return -EINVAL; + struct cx18 *cx = ((struct cx18_open_id *)fh)->cx; + struct v4l2_sliced_vbi_format *vbifmt = &fmt->fmt.sliced; + + vbifmt->io_size = sizeof(struct v4l2_sliced_vbi_data) * 36; + vbifmt->reserved[0] = 0; + vbifmt->reserved[1] = 0; + + if (vbifmt->service_set) + cx18_expand_service_set(vbifmt, cx->is_50hz); + check_service_set(vbifmt, cx->is_50hz); + vbifmt->service_set = cx18_get_service_set(vbifmt); + return 0; } static int cx18_s_fmt_vid_cap(struct file *file, void *fh, @@ -250,7 +284,28 @@ static int cx18_s_fmt_vbi_cap(struct file *file, void *fh, static int cx18_s_fmt_sliced_vbi_cap(struct file *file, void *fh, struct v4l2_format *fmt) { - return -EINVAL; + struct cx18_open_id *id = fh; + struct cx18 *cx = id->cx; + int ret; + struct v4l2_sliced_vbi_format *vbifmt = &fmt->fmt.sliced; + + ret = v4l2_prio_check(&cx->prio, &id->prio); + if (ret) + return ret; + + ret = cx18_try_fmt_sliced_vbi_cap(file, fh, fmt); + if (ret) + return ret; + + if (check_service_set(vbifmt, cx->is_50hz) == 0) + return -EINVAL; + + if (cx18_raw_vbi(cx) && atomic_read(&cx->ana_capturing) > 0) + return -EBUSY; + cx->vbi.in.type = V4L2_BUF_TYPE_SLICED_VBI_CAPTURE; + cx18_av_cmd(cx, VIDIOC_S_FMT, fmt); + memcpy(cx->vbi.sliced_in, vbifmt, sizeof(*cx->vbi.sliced_in)); + return 0; } static int cx18_g_chip_ident(struct file *file, void *fh, @@ -548,7 +603,6 @@ int cx18_s_std(struct file *file, void *fh, v4l2_std_id *std) cx->vbi.count = cx->is_50hz ? 18 : 12; cx->vbi.start[0] = cx->is_50hz ? 6 : 10; cx->vbi.start[1] = cx->is_50hz ? 318 : 273; - cx->vbi.sliced_decoder_line_size = cx->is_60hz ? 272 : 284; CX18_DEBUG_INFO("Switching standard to %llx.\n", (unsigned long long) cx->std); @@ -599,6 +653,19 @@ static int cx18_g_tuner(struct file *file, void *fh, struct v4l2_tuner *vt) static int cx18_g_sliced_vbi_cap(struct file *file, void *fh, struct v4l2_sliced_vbi_cap *cap) { + struct cx18 *cx = ((struct cx18_open_id *)fh)->cx; + int set = cx->is_50hz ? V4L2_SLICED_VBI_625 : V4L2_SLICED_VBI_525; + int f, l; + + if (cap->type == V4L2_BUF_TYPE_SLICED_VBI_CAPTURE) { + for (f = 0; f < 2; f++) { + for (l = 0; l < 24; l++) { + if (valid_service_line(f, l, cx->is_50hz)) + cap->service_lines[f][l] = set; + } + } + return 0; + } return -EINVAL; } diff --git a/drivers/media/video/cx18/cx18-streams.c b/drivers/media/video/cx18/cx18-streams.c index abc3fe605f0..a89f7f840d9 100644 --- a/drivers/media/video/cx18/cx18-streams.c +++ b/drivers/media/video/cx18/cx18-streams.c @@ -349,10 +349,6 @@ static void cx18_vbi_setup(struct cx18_stream *s) /* setup VBI registers */ cx18_av_cmd(cx, VIDIOC_S_FMT, &cx->vbi.in); - /* determine number of lines and total number of VBI bytes. - A raw line takes 1444 bytes: 4 byte SAV code + 2 * 720 - A sliced line takes 51 bytes: 4 byte frame header, 4 byte internal - header, 42 data bytes + checksum (to be confirmed) */ if (raw) { lines = cx->vbi.count * 2; } else { @@ -361,24 +357,53 @@ static void cx18_vbi_setup(struct cx18_stream *s) lines += 2; } - cx->vbi.enc_size = lines * - (raw ? cx->vbi.raw_size : cx->vbi.sliced_size); - data[0] = s->handle; /* Lines per field */ data[1] = (lines / 2) | ((lines / 2) << 16); /* bytes per line */ - data[2] = (raw ? cx->vbi.raw_decoder_line_size - : cx->vbi.sliced_decoder_line_size); + data[2] = (raw ? vbi_active_samples + : (cx->is_60hz ? vbi_hblank_samples_60Hz + : vbi_hblank_samples_50Hz)); /* Every X number of frames a VBI interrupt arrives (frames as in 25 or 30 fps) */ data[3] = 1; - /* Setup VBI for the cx25840 digitizer */ + /* + * Set the SAV/EAV RP codes to look for as start/stop points + * when in VIP-1.1 mode + */ if (raw) { + /* + * Start codes for beginning of "active" line in vertical blank + * 0x20 ( VerticalBlank ) + * 0x60 ( EvenField VerticalBlank ) + */ data[4] = 0x20602060; + /* + * End codes for end of "active" raw lines and regular lines + * 0x30 ( VerticalBlank HorizontalBlank) + * 0x70 ( EvenField VerticalBlank HorizontalBlank) + * 0x90 (Task HorizontalBlank) + * 0xd0 (Task EvenField HorizontalBlank) + */ data[5] = 0x307090d0; } else { + /* + * End codes for active video, we want data in the hblank region + * 0xb0 (Task 0 VerticalBlank HorizontalBlank) + * 0xf0 (Task EvenField VerticalBlank HorizontalBlank) + * + * Since the V bit is only allowed to toggle in the EAV RP code, + * just before the first active region line, these two + * are problematic and we have to ignore them: + * 0x90 (Task HorizontalBlank) + * 0xd0 (Task EvenField HorizontalBlank) + */ data[4] = 0xB0F0B0F0; + /* + * Start codes for beginning of active line in vertical blank + * 0xa0 (Task VerticalBlank ) + * 0xe0 (Task EvenField VerticalBlank ) + */ data[5] = 0xA0E0A0E0; } diff --git a/drivers/media/video/cx18/cx18-vbi.c b/drivers/media/video/cx18/cx18-vbi.c index fb595bd548e..38d26c42e4c 100644 --- a/drivers/media/video/cx18/cx18-vbi.c +++ b/drivers/media/video/cx18/cx18-vbi.c @@ -27,6 +27,16 @@ #include "cx18-queue.h" #include "cx18-av-core.h" +/* + * Raster Reference/Protection (RP) bytes, used in Start/End Active + * Video codes emitted from the digitzer in VIP 1.x mode, that flag the start + * of VBI sample or VBI ancilliary data regions in the digitial ratser line. + * + * Task FieldEven VerticalBlank HorizontalBlank 0 0 0 0 + */ +static const u8 raw_vbi_sav_rp[2] = { 0x20, 0x60 }; /* __V_, _FV_ */ +static const u8 sliced_vbi_eav_rp[2] = { 0xb0, 0xf0 }; /* T_VH, TFVH */ + static void copy_vbi_data(struct cx18 *cx, int lines, u32 pts_stamp) { int line = 0; @@ -34,10 +44,17 @@ static void copy_vbi_data(struct cx18 *cx, int lines, u32 pts_stamp) u32 linemask[2] = { 0, 0 }; unsigned short size; static const u8 mpeg_hdr_data[] = { - 0x00, 0x00, 0x01, 0xba, 0x44, 0x00, 0x0c, 0x66, - 0x24, 0x01, 0x01, 0xd1, 0xd3, 0xfa, 0xff, 0xff, - 0x00, 0x00, 0x01, 0xbd, 0x00, 0x1a, 0x84, 0x80, - 0x07, 0x21, 0x00, 0x5d, 0x63, 0xa7, 0xff, 0xff + /* MPEG-2 Program Pack */ + 0x00, 0x00, 0x01, 0xba, /* Prog Pack start code */ + 0x44, 0x00, 0x0c, 0x66, 0x24, 0x01, /* SCR, SCR Ext, markers */ + 0x01, 0xd1, 0xd3, /* Mux Rate, markers */ + 0xfa, 0xff, 0xff, /* Res, Suff cnt, Stuff */ + /* MPEG-2 Private Stream 1 PES Packet */ + 0x00, 0x00, 0x01, 0xbd, /* Priv Stream 1 start */ + 0x00, 0x1a, /* length */ + 0x84, 0x80, 0x07, /* flags, hdr data len */ + 0x21, 0x00, 0x5d, 0x63, 0xa7, /* PTS, markers */ + 0xff, 0xff /* stuffing */ }; const int sd = sizeof(mpeg_hdr_data); /* start of vbi data */ int idx = cx->vbi.frame % CX18_VBI_FRAMES; @@ -71,7 +88,7 @@ static void copy_vbi_data(struct cx18 *cx, int lines, u32 pts_stamp) memcpy(dst + sd + 4, dst + sd + 12, line * 43); size = 4 + ((43 * line + 3) & ~3); } else { - memcpy(dst + sd, "cx0", 4); + memcpy(dst + sd, "itv0", 4); memcpy(dst + sd + 4, &linemask[0], 8); size = 12 + ((43 * line + 3) & ~3); } @@ -90,10 +107,10 @@ static void copy_vbi_data(struct cx18 *cx, int lines, u32 pts_stamp) Returns new compressed size. */ static u32 compress_raw_buf(struct cx18 *cx, u8 *buf, u32 size) { - u32 line_size = cx->vbi.raw_decoder_line_size; + u32 line_size = vbi_active_samples; u32 lines = cx->vbi.count; - u8 sav1 = cx->vbi.raw_decoder_sav_odd_field; - u8 sav2 = cx->vbi.raw_decoder_sav_even_field; + u8 sav1 = raw_vbi_sav_rp[0]; + u8 sav2 = raw_vbi_sav_rp[1]; u8 *q = buf; u8 *p; int i; @@ -115,15 +132,16 @@ static u32 compress_raw_buf(struct cx18 *cx, u8 *buf, u32 size) /* Compressed VBI format, all found sliced blocks put next to one another Returns new compressed size */ static u32 compress_sliced_buf(struct cx18 *cx, u32 line, u8 *buf, - u32 size, u8 sav) + u32 size, u8 eav) { - u32 line_size = cx->vbi.sliced_decoder_line_size; struct v4l2_decode_vbi_line vbi; int i; + u32 line_size = cx->is_60hz ? vbi_hblank_samples_60Hz + : vbi_hblank_samples_50Hz; /* find the first valid line */ for (i = 0; i < size; i++, buf++) { - if (buf[0] == 0xff && !buf[1] && !buf[2] && buf[3] == sav) + if (buf[0] == 0xff && !buf[1] && !buf[2] && buf[3] == eav) break; } @@ -133,8 +151,8 @@ static u32 compress_sliced_buf(struct cx18 *cx, u32 line, u8 *buf, for (i = 0; i < size / line_size; i++) { u8 *p = buf + i * line_size; - /* Look for SAV code */ - if (p[0] != 0xff || p[1] || p[2] || p[3] != sav) + /* Look for EAV code */ + if (p[0] != 0xff || p[1] || p[2] || p[3] != eav) continue; vbi.p = p + 4; cx18_av_cmd(cx, VIDIOC_INT_DECODE_VBI_LINE, &vbi); @@ -159,6 +177,12 @@ void cx18_process_vbi_data(struct cx18 *cx, struct cx18_buffer *buf, if (streamtype != CX18_ENC_STREAM_TYPE_VBI) return; + /* + * Note the CX23418 provides a 12 byte header, in it's raw VBI + * buffers to us, that we currently throw away: + * 0x3fffffff [4 bytes of something] [4 byte timestamp] + */ + /* Raw VBI data */ if (cx18_raw_vbi(cx)) { u8 type; @@ -173,7 +197,7 @@ void cx18_process_vbi_data(struct cx18 *cx, struct cx18_buffer *buf, size = buf->bytesused = compress_raw_buf(cx, p, size); /* second field of the frame? */ - if (type == cx->vbi.raw_decoder_sav_even_field) { + if (type == raw_vbi_sav_rp[1]) { /* Dirty hack needed for backwards compatibility of old VBI software. */ p += size - 4; @@ -187,14 +211,14 @@ void cx18_process_vbi_data(struct cx18 *cx, struct cx18_buffer *buf, cx18_buf_swap(buf); /* first field */ - lines = compress_sliced_buf(cx, 0, p, size / 2, - cx->vbi.sliced_decoder_sav_odd_field); + /* compress_sliced_buf() will skip the 12 bytes of header */ + lines = compress_sliced_buf(cx, 0, p, size / 2, sliced_vbi_eav_rp[0]); /* second field */ /* experimentation shows that the second half does not always begin at the exact address. So start a bit earlier (hence 32). */ lines = compress_sliced_buf(cx, lines, p + size / 2 - 32, - size / 2 + 32, cx->vbi.sliced_decoder_sav_even_field); + size / 2 + 32, sliced_vbi_eav_rp[1]); /* always return at least one empty line */ if (lines == 0) { cx->vbi.sliced_data[0].id = 0; |