[PATCH] I2O: new sysfs attributes and Adaptec specific block device access and 64-bit DMA support

Changes:
 - Added Bus-OSM which could be used by user space programs to reset a
   channel on the controller
 - Make ioctl's in Config-OSM obsolete in prefer for sysfs attributes and
   move those to its own file
 - Added sysfs attribute for firmware read and write access for I2O
   controllers
 - Added special handling of firmware read and write access for Adaptec
   controllers
 - Added vendor id and product id as sysfs-attribute to Executive classes
 - Added automatic notification of LCT change handling to Exec-OSM
 - Added flushing function to Block-OSM for later barrier implementation
 - Use PRIVATE messages for Block access on Adaptec controllers, which are
   faster then BLOCK class access
 - Cleaned up support for Promise controller
 - New messages are now detected using the IRQ status register as
   suggested by the I2O spec
 - Added i2o_dma_high() and i2o_dma_low() functions
 - Added facility for SG tablesize calculation when using 32-bit and
   64-bit DMA addresses
 - Added i2o_dma_map_single() and i2o_dma_map_sg() which could build the
   SG list for 32-bit as well as 64-bit DMA addresses

Signed-off-by: Markus Lidel <Markus.Lidel@shadowconnect.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

1 files changed, 579 insertions, 0 deletions

diff --git a/drivers/message/i2o/config-osm.c b/drivers/message/i2o/config-osm.c
new file mode 100644
index 00000000000..d0267609a94
--- /dev/null
+++ b/drivers/message/i2o/config-osm.c
@@ -0,0 +1,579 @@
+/*
+ *	Configuration OSM
+ *
+ *	Copyright (C) 2005	Markus Lidel <Markus.Lidel@shadowconnect.com>
+ *
+ *	This program is free software; you can redistribute it and/or modify it
+ *	under the terms of the GNU General Public License as published by the
+ *	Free Software Foundation; either version 2 of the License, or (at your
+ *	option) any later version.
+ *
+ *	Fixes/additions:
+ *		Markus Lidel <Markus.Lidel@shadowconnect.com>
+ *			initial version.
+ */
+
+#include <linux/module.h>
+#include <linux/i2o.h>
+#include <linux/namei.h>
+
+#include <asm/uaccess.h>
+
+#define OSM_NAME	"config-osm"
+#define OSM_VERSION	"1.248"
+#define OSM_DESCRIPTION	"I2O Configuration OSM"
+
+/* access mode user rw */
+#define S_IWRSR (S_IRUSR | S_IWUSR)
+
+static struct i2o_driver i2o_config_driver;
+
+/* Special file operations for sysfs */
+struct fops_attribute {
+	struct bin_attribute bin;
+	struct file_operations fops;
+};
+
+/**
+ *	sysfs_read_dummy
+ */
+static ssize_t sysfs_read_dummy(struct kobject *kobj, char *buf, loff_t offset,
+				size_t count)
+{
+	return 0;
+};
+
+/**
+ *	sysfs_write_dummy
+ */
+static ssize_t sysfs_write_dummy(struct kobject *kobj, char *buf, loff_t offset,
+				 size_t count)
+{
+	return 0;
+};
+
+/**
+ *	sysfs_create_fops_file - Creates attribute with special file operations
+ *	@kobj: kobject which should contains the attribute
+ *	@attr: attributes which should be used to create file
+ *
+ *	First creates attribute @attr in kobject @kobj. If it is the first time
+ *	this function is called, merge old fops from sysfs with new one and
+ *	write it back. Afterwords the new fops will be set for the created
+ *	attribute.
+ *
+ *	Returns 0 on success or negative error code on failure.
+ */
+static int sysfs_create_fops_file(struct kobject *kobj,
+				  struct fops_attribute *attr)
+{
+	struct file_operations tmp, *fops;
+	struct dentry *d;
+	struct qstr qstr;
+	int rc;
+
+	fops = &attr->fops;
+
+	if (fops->read)
+		attr->bin.read = sysfs_read_dummy;
+
+	if (fops->write)
+		attr->bin.write = sysfs_write_dummy;
+
+	if ((rc = sysfs_create_bin_file(kobj, &attr->bin)))
+		return rc;
+
+	qstr.name = attr->bin.attr.name;
+	qstr.len = strlen(qstr.name);
+	qstr.hash = full_name_hash(qstr.name, qstr.len);
+
+	if ((d = lookup_hash(&qstr, kobj->dentry))) {
+		if (!fops->owner) {
+			memcpy(&tmp, d->d_inode->i_fop, sizeof(tmp));
+			if (fops->read)
+				tmp.read = fops->read;
+			if (fops->write)
+				tmp.write = fops->write;
+			memcpy(fops, &tmp, sizeof(tmp));
+		}
+
+		d->d_inode->i_fop = fops;
+	} else
+		sysfs_remove_bin_file(kobj, &attr->bin);
+
+	return -ENOENT;
+};
+
+/**
+ *	sysfs_remove_fops_file - Remove attribute with special file operations
+ *	@kobj: kobject which contains the attribute
+ *	@attr: attributes which are used to create file
+ *
+ *	Only wrapper arround sysfs_remove_bin_file()
+ *
+ *	Returns 0 on success or negative error code on failure.
+ */
+static inline int sysfs_remove_fops_file(struct kobject *kobj,
+					 struct fops_attribute *attr)
+{
+	return sysfs_remove_bin_file(kobj, &attr->bin);
+};
+
+/**
+ *	i2o_config_read_hrt - Returns the HRT of the controller
+ *	@kob: kernel object handle
+ *	@buf: buffer into which the HRT should be copied
+ *	@off: file offset
+ *	@count: number of bytes to read
+ *
+ *	Put @count bytes starting at @off into @buf from the HRT of the I2O
+ *	controller corresponding to @kobj.
+ *
+ *	Returns number of bytes copied into buffer.
+ */
+static ssize_t i2o_config_read_hrt(struct kobject *kobj, char *buf,
+				   loff_t offset, size_t count)
+{
+	struct i2o_controller *c = kobj_to_i2o_device(kobj)->iop;
+	i2o_hrt *hrt = c->hrt.virt;
+
+	u32 size = (hrt->num_entries * hrt->entry_len + 2) * 4;
+
+	if (offset > size)
+		return 0;
+
+	if (offset + count > size)
+		count = size - offset;
+
+	memcpy(buf, (u8 *) hrt + offset, count);
+
+	return count;
+};
+
+/**
+ *	i2o_config_read_lct - Returns the LCT of the controller
+ *	@kob: kernel object handle
+ *	@buf: buffer into which the LCT should be copied
+ *	@off: file offset
+ *	@count: number of bytes to read
+ *
+ *	Put @count bytes starting at @off into @buf from the LCT of the I2O
+ *	controller corresponding to @kobj.
+ *
+ *	Returns number of bytes copied into buffer.
+ */
+static ssize_t i2o_config_read_lct(struct kobject *kobj, char *buf,
+				   loff_t offset, size_t count)
+{
+	struct i2o_controller *c = kobj_to_i2o_device(kobj)->iop;
+	u32 size = c->lct->table_size * 4;
+
+	if (offset > size)
+		return 0;
+
+	if (offset + count > size)
+		count = size - offset;
+
+	memcpy(buf, (u8 *) c->lct + offset, count);
+
+	return count;
+};
+
+#define I2O_CONFIG_SW_ATTR(_name,_mode,_type,_swid) \
+static ssize_t i2o_config_##_name##_read(struct file *file, char __user *buf, size_t count, loff_t * offset) { \
+	return i2o_config_sw_read(file, buf, count, offset, _type, _swid); \
+};\
+\
+static ssize_t i2o_config_##_name##_write(struct file *file, const char __user *buf, size_t count, loff_t * offset) { \
+	return i2o_config_sw_write(file, buf, count, offset, _type, _swid); \
+}; \
+\
+static struct fops_attribute i2o_config_attr_##_name = { \
+	.bin = { .attr = { .name = __stringify(_name), .mode = _mode, \
+			   .owner = THIS_MODULE }, \
+		 .size = 0, }, \
+	.fops = { .write = i2o_config_##_name##_write, \
+		  .read = i2o_config_##_name##_read} \
+};
+
+#ifdef CONFIG_I2O_EXT_ADAPTEC
+
+/**
+ *	i2o_config_dpt_reagion - Converts type and id to flash region
+ *	@swtype: type of software module reading
+ *	@swid: id of software which should be read
+ *
+ *	Converts type and id from I2O spec to the matching region for DPT /
+ *	Adaptec controllers.
+ *
+ *	Returns region which match type and id or -1 on error.
+ */
+static u32 i2o_config_dpt_region(u8 swtype, u8 swid)
+{
+	switch (swtype) {
+	case I2O_SOFTWARE_MODULE_IRTOS:
+		/*
+		 * content: operation firmware
+		 * region size:
+		 *      0xbc000 for 2554, 3754, 2564, 3757
+		 *      0x170000 for 2865
+		 *      0x17c000 for 3966
+		 */
+		if (!swid)
+			return 0;
+
+		break;
+
+	case I2O_SOFTWARE_MODULE_IOP_PRIVATE:
+		/*
+		 * content: BIOS and SMOR
+		 * BIOS size: first 0x8000 bytes
+		 * region size:
+		 *      0x40000 for 2554, 3754, 2564, 3757
+		 *      0x80000 for 2865, 3966
+		 */
+		if (!swid)
+			return 1;
+
+		break;
+
+	case I2O_SOFTWARE_MODULE_IOP_CONFIG:
+		switch (swid) {
+		case 0:
+			/*
+			 * content: NVRAM defaults
+			 * region size: 0x2000 bytes
+			 */
+			return 2;
+		case 1:
+			/*
+			 * content: serial number
+			 * region size: 0x2000 bytes
+			 */
+			return 3;
+		}
+		break;
+	}
+
+	return -1;
+};
+
+#endif
+
+/**
+ *	i2o_config_sw_read - Read a software module from controller
+ *	@file: file pointer
+ *	@buf: buffer into which the data should be copied
+ *	@count: number of bytes to read
+ *	@off: file offset
+ *	@swtype: type of software module reading
+ *	@swid: id of software which should be read
+ *
+ *	Transfers @count bytes at offset @offset from IOP into buffer using
+ *	type @swtype and id @swid as described in I2O spec.
+ *
+ *	Returns number of bytes copied into buffer or error code on failure.
+ */
+static ssize_t i2o_config_sw_read(struct file *file, char __user * buf,
+				  size_t count, loff_t * offset, u8 swtype,
+				  u32 swid)
+{
+	struct sysfs_dirent *sd = file->f_dentry->d_parent->d_fsdata;
+	struct kobject *kobj = sd->s_element;
+	struct i2o_controller *c = kobj_to_i2o_device(kobj)->iop;
+	u32 m, function = I2O_CMD_SW_UPLOAD;
+	struct i2o_dma buffer;
+	struct i2o_message __iomem *msg;
+	u32 __iomem *mptr;
+	int rc, status;
+
+	m = i2o_msg_get_wait(c, &msg, I2O_TIMEOUT_MESSAGE_GET);
+	if (m == I2O_QUEUE_EMPTY)
+		return -EBUSY;
+
+	mptr = &msg->body[3];
+
+	if ((rc = i2o_dma_alloc(&c->pdev->dev, &buffer, count, GFP_KERNEL))) {
+		i2o_msg_nop(c, m);
+		return rc;
+	}
+#ifdef CONFIG_I2O_EXT_ADAPTEC
+	if (c->adaptec) {
+		mptr = &msg->body[4];
+		function = I2O_CMD_PRIVATE;
+
+		writel(TEN_WORD_MSG_SIZE | SGL_OFFSET_8, &msg->u.head[0]);
+
+		writel(I2O_VENDOR_DPT << 16 | I2O_DPT_FLASH_READ,
+		       &msg->body[0]);
+		writel(i2o_config_dpt_region(swtype, swid), &msg->body[1]);
+		writel(*offset, &msg->body[2]);
+		writel(count, &msg->body[3]);
+	} else
+#endif
+		writel(NINE_WORD_MSG_SIZE | SGL_OFFSET_7, &msg->u.head[0]);
+
+	writel(0xD0000000 | count, mptr++);
+	writel(buffer.phys, mptr);
+
+	writel(function << 24 | HOST_TID << 12 | ADAPTER_TID, &msg->u.head[1]);
+	writel(i2o_config_driver.context, &msg->u.head[2]);
+	writel(0, &msg->u.head[3]);
+
+#ifdef CONFIG_I2O_EXT_ADAPTEC
+	if (!c->adaptec)
+#endif
+	{
+		writel((u32) swtype << 16 | (u32) 1 << 8, &msg->body[0]);
+		writel(0, &msg->body[1]);
+		writel(swid, &msg->body[2]);
+	}
+
+	status = i2o_msg_post_wait_mem(c, m, 60, &buffer);
+
+	if (status == I2O_POST_WAIT_OK) {
+		if (!(rc = copy_to_user(buf, buffer.virt, count))) {
+			rc = count;
+			*offset += count;
+		}
+	} else
+		rc = -EIO;
+
+	if (status != -ETIMEDOUT)
+		i2o_dma_free(&c->pdev->dev, &buffer);
+
+	return rc;
+};
+
+/**
+ *	i2o_config_sw_write - Write a software module to controller
+ *	@file: file pointer
+ *	@buf: buffer into which the data should be copied
+ *	@count: number of bytes to read
+ *	@off: file offset
+ *	@swtype: type of software module writing
+ *	@swid: id of software which should be written
+ *
+ *	Transfers @count bytes at offset @offset from buffer to IOP using
+ *	type @swtype and id @swid as described in I2O spec.
+ *
+ *	Returns number of bytes copied from buffer or error code on failure.
+ */
+static ssize_t i2o_config_sw_write(struct file *file, const char __user * buf,
+				   size_t count, loff_t * offset, u8 swtype,
+				   u32 swid)
+{
+	struct sysfs_dirent *sd = file->f_dentry->d_parent->d_fsdata;
+	struct kobject *kobj = sd->s_element;
+	struct i2o_controller *c = kobj_to_i2o_device(kobj)->iop;
+	u32 m, function = I2O_CMD_SW_DOWNLOAD;
+	struct i2o_dma buffer;
+	struct i2o_message __iomem *msg;
+	u32 __iomem *mptr;
+	int rc, status;
+
+	m = i2o_msg_get_wait(c, &msg, I2O_TIMEOUT_MESSAGE_GET);
+	if (m == I2O_QUEUE_EMPTY)
+		return -EBUSY;
+
+	mptr = &msg->body[3];
+
+	if ((rc = i2o_dma_alloc(&c->pdev->dev, &buffer, count, GFP_KERNEL)))
+		goto nop_msg;
+
+	if ((rc = copy_from_user(buffer.virt, buf, count)))
+		goto free_buffer;
+
+#ifdef CONFIG_I2O_EXT_ADAPTEC
+	if (c->adaptec) {
+		mptr = &msg->body[4];
+		function = I2O_CMD_PRIVATE;
+
+		writel(TEN_WORD_MSG_SIZE | SGL_OFFSET_8, &msg->u.head[0]);
+
+		writel(I2O_VENDOR_DPT << 16 | I2O_DPT_FLASH_WRITE,
+		       &msg->body[0]);
+		writel(i2o_config_dpt_region(swtype, swid), &msg->body[1]);
+		writel(*offset, &msg->body[2]);
+		writel(count, &msg->body[3]);
+	} else
+#endif
+		writel(NINE_WORD_MSG_SIZE | SGL_OFFSET_7, &msg->u.head[0]);
+
+	writel(0xD4000000 | count, mptr++);
+	writel(buffer.phys, mptr);
+
+	writel(function << 24 | HOST_TID << 12 | ADAPTER_TID, &msg->u.head[1]);
+	writel(i2o_config_driver.context, &msg->u.head[2]);
+	writel(0, &msg->u.head[3]);
+
+#ifdef CONFIG_I2O_EXT_ADAPTEC
+	if (!c->adaptec)
+#endif
+	{
+		writel((u32) swtype << 16 | (u32) 1 << 8, &msg->body[0]);
+		writel(0, &msg->body[1]);
+		writel(swid, &msg->body[2]);
+	}
+
+	status = i2o_msg_post_wait_mem(c, m, 60, &buffer);
+
+	if (status != -ETIMEDOUT)
+		i2o_dma_free(&c->pdev->dev, &buffer);
+
+	if (status != I2O_POST_WAIT_OK)
+		return -EIO;
+
+	*offset += count;
+
+	return count;
+
+      free_buffer:
+	i2o_dma_free(&c->pdev->dev, &buffer);
+
+      nop_msg:
+	i2o_msg_nop(c, m);
+
+	return rc;
+};
+
+/* attribute for HRT in sysfs */
+static struct bin_attribute i2o_config_hrt_attr = {
+	.attr = {
+		 .name = "hrt",
+		 .mode = S_IRUGO,
+		 .owner = THIS_MODULE},
+	.size = 0,
+	.read = i2o_config_read_hrt
+};
+
+/* attribute for LCT in sysfs */
+static struct bin_attribute i2o_config_lct_attr = {
+	.attr = {
+		 .name = "lct",
+		 .mode = S_IRUGO,
+		 .owner = THIS_MODULE},
+	.size = 0,
+	.read = i2o_config_read_lct
+};
+
+/* IRTOS firmware access */
+I2O_CONFIG_SW_ATTR(irtos, S_IWRSR, I2O_SOFTWARE_MODULE_IRTOS, 0);
+
+#ifdef CONFIG_I2O_EXT_ADAPTEC
+
+/*
+ * attribute for BIOS / SMOR, nvram and serial number access on DPT / Adaptec
+ * controllers
+ */
+I2O_CONFIG_SW_ATTR(bios, S_IWRSR, I2O_SOFTWARE_MODULE_IOP_PRIVATE, 0);
+I2O_CONFIG_SW_ATTR(nvram, S_IWRSR, I2O_SOFTWARE_MODULE_IOP_CONFIG, 0);
+I2O_CONFIG_SW_ATTR(serial, S_IWRSR, I2O_SOFTWARE_MODULE_IOP_CONFIG, 1);
+
+#endif
+
+/**
+ *	i2o_config_notify_controller_add - Notify of added controller
+ *	@c: the controller which was added
+ *
+ *	If a I2O controller is added, we catch the notification to add sysfs
+ *	entries.
+ */
+static void i2o_config_notify_controller_add(struct i2o_controller *c)
+{
+	struct kobject *kobj = &c->exec->device.kobj;
+
+	sysfs_create_bin_file(kobj, &i2o_config_hrt_attr);
+	sysfs_create_bin_file(kobj, &i2o_config_lct_attr);
+
+	sysfs_create_fops_file(kobj, &i2o_config_attr_irtos);
+#ifdef CONFIG_I2O_EXT_ADAPTEC
+	if (c->adaptec) {
+		sysfs_create_fops_file(kobj, &i2o_config_attr_bios);
+		sysfs_create_fops_file(kobj, &i2o_config_attr_nvram);
+		sysfs_create_fops_file(kobj, &i2o_config_attr_serial);
+	}
+#endif
+};
+
+/**
+ *	i2o_config_notify_controller_remove - Notify of removed controller
+ *	@c: the controller which was removed
+ *
+ *	If a I2O controller is removed, we catch the notification to remove the
+ *	sysfs entries.
+ */
+static void i2o_config_notify_controller_remove(struct i2o_controller *c)
+{
+	struct kobject *kobj = &c->exec->device.kobj;
+
+#ifdef CONFIG_I2O_EXT_ADAPTEC
+	if (c->adaptec) {
+		sysfs_remove_fops_file(kobj, &i2o_config_attr_serial);
+		sysfs_remove_fops_file(kobj, &i2o_config_attr_nvram);
+		sysfs_remove_fops_file(kobj, &i2o_config_attr_bios);
+	}
+#endif
+	sysfs_remove_fops_file(kobj, &i2o_config_attr_irtos);
+
+	sysfs_remove_bin_file(kobj, &i2o_config_lct_attr);
+	sysfs_remove_bin_file(kobj, &i2o_config_hrt_attr);
+};
+
+/* Config OSM driver struct */
+static struct i2o_driver i2o_config_driver = {
+	.name = OSM_NAME,
+	.notify_controller_add = i2o_config_notify_controller_add,
+	.notify_controller_remove = i2o_config_notify_controller_remove
+};
+
+#ifdef CONFIG_I2O_CONFIG_OLD_IOCTL
+#include "i2o_config.c"
+#endif
+
+/**
+ *	i2o_config_init - Configuration OSM initialization function
+ *
+ *	Registers Configuration OSM in the I2O core and if old ioctl's are
+ *	compiled in initialize them.
+ *
+ *	Returns 0 on success or negative error code on failure.
+ */
+static int __init i2o_config_init(void)
+{
+	printk(KERN_INFO OSM_DESCRIPTION " v" OSM_VERSION "\n");
+
+	if (i2o_driver_register(&i2o_config_driver)) {
+		osm_err("handler register failed.\n");
+		return -EBUSY;
+	}
+#ifdef CONFIG_I2O_CONFIG_OLD_IOCTL
+	if (i2o_config_old_init())
+		i2o_driver_unregister(&i2o_config_driver);
+#endif
+
+	return 0;
+}
+
+/**
+ *	i2o_config_exit - Configuration OSM exit function
+ *
+ *	If old ioctl's are compiled in exit remove them and unregisters
+ *	Configuration OSM from I2O core.
+ */
+static void i2o_config_exit(void)
+{
+#ifdef CONFIG_I2O_CONFIG_OLD_IOCTL
+	i2o_config_old_exit();
+#endif
+
+	i2o_driver_unregister(&i2o_config_driver);
+}
+
+MODULE_AUTHOR("Markus Lidel <Markus.Lidel@shadowconnect.com>");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION(OSM_DESCRIPTION);
+MODULE_VERSION(OSM_VERSION);
+
+module_init(i2o_config_init);
+module_exit(i2o_config_exit);