diff options
| author | Markus Lidel <Markus.Lidel@shadowconnect.com> | 2005-06-23 22:02:16 -0700 |
|---|---|---|
| committer | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-06-24 00:05:28 -0700 |
| commit | f10378fff658f61307496e0ae00095041725cf07 (patch) | |
| tree | 0c0413649317677771fa325dded94f1e12a6a0b7 /drivers/message/i2o/i2o_proc.c | |
| parent | f88e119c4b824a5017456fa094950d0f4092d96c (diff) | |
[PATCH] I2O: new sysfs attributes and Adaptec specific block device access and 64-bit DMA support
Changes:
- Added Bus-OSM which could be used by user space programs to reset a
channel on the controller
- Make ioctl's in Config-OSM obsolete in prefer for sysfs attributes and
move those to its own file
- Added sysfs attribute for firmware read and write access for I2O
controllers
- Added special handling of firmware read and write access for Adaptec
controllers
- Added vendor id and product id as sysfs-attribute to Executive classes
- Added automatic notification of LCT change handling to Exec-OSM
- Added flushing function to Block-OSM for later barrier implementation
- Use PRIVATE messages for Block access on Adaptec controllers, which are
faster then BLOCK class access
- Cleaned up support for Promise controller
- New messages are now detected using the IRQ status register as
suggested by the I2O spec
- Added i2o_dma_high() and i2o_dma_low() functions
- Added facility for SG tablesize calculation when using 32-bit and
64-bit DMA addresses
- Added i2o_dma_map_single() and i2o_dma_map_sg() which could build the
SG list for 32-bit as well as 64-bit DMA addresses
Signed-off-by: Markus Lidel <Markus.Lidel@shadowconnect.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Diffstat (limited to 'drivers/message/i2o/i2o_proc.c')
| -rw-r--r-- | drivers/message/i2o/i2o_proc.c | 4 |
1 files changed, 2 insertions, 2 deletions
diff --git a/drivers/message/i2o/i2o_proc.c b/drivers/message/i2o/i2o_proc.c index b176d0eeff7..e5b74452c49 100644 --- a/drivers/message/i2o/i2o_proc.c +++ b/drivers/message/i2o/i2o_proc.c @@ -228,7 +228,7 @@ static const char *i2o_get_class_name(int class) case I2O_CLASS_FLOPPY_DEVICE: idx = 12; break; - case I2O_CLASS_BUS_ADAPTER_PORT: + case I2O_CLASS_BUS_ADAPTER: idx = 13; break; case I2O_CLASS_PEER_TRANSPORT_AGENT: @@ -490,7 +490,7 @@ static int i2o_seq_show_lct(struct seq_file *seq, void *v) seq_printf(seq, ", Unknown Device Type"); break; - case I2O_CLASS_BUS_ADAPTER_PORT: + case I2O_CLASS_BUS_ADAPTER: if (lct->lct_entry[i].sub_class < BUS_TABLE_SIZE) seq_printf(seq, ", %s", bus_ports[lct->lct_entry[i]. |