Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 1327 insertions, 0 deletions

diff --git a/drivers/message/i2o/iop.c b/drivers/message/i2o/iop.c
new file mode 100644
index 00000000000..50c8cedf7a2
--- /dev/null
+++ b/drivers/message/i2o/iop.c
@@ -0,0 +1,1327 @@
+/*
+ *	Functions to handle I2O controllers and I2O message handling
+ *
+ *	Copyright (C) 1999-2002	Red Hat Software
+ *
+ *	Written by Alan Cox, Building Number Three Ltd
+ *
+ *	This program is free software; you can redistribute it and/or modify it
+ *	under the terms of the GNU General Public License as published by the
+ *	Free Software Foundation; either version 2 of the License, or (at your
+ *	option) any later version.
+ *
+ *	A lot of the I2O message side code from this is taken from the
+ *	Red Creek RCPCI45 adapter driver by Red Creek Communications
+ *
+ *	Fixes/additions:
+ *		Philipp Rumpf
+ *		Juha Sievänen <Juha.Sievanen@cs.Helsinki.FI>
+ *		Auvo Häkkinen <Auvo.Hakkinen@cs.Helsinki.FI>
+ *		Deepak Saxena <deepak@plexity.net>
+ *		Boji T Kannanthanam <boji.t.kannanthanam@intel.com>
+ *		Alan Cox <alan@redhat.com>:
+ *			Ported to Linux 2.5.
+ *		Markus Lidel <Markus.Lidel@shadowconnect.com>:
+ *			Minor fixes for 2.6.
+ */
+
+#include <linux/module.h>
+#include <linux/i2o.h>
+#include <linux/delay.h>
+
+#define OSM_VERSION	"$Rev$"
+#define OSM_DESCRIPTION	"I2O subsystem"
+
+/* global I2O controller list */
+LIST_HEAD(i2o_controllers);
+
+/*
+ * global I2O System Table. Contains information about all the IOPs in the
+ * system. Used to inform IOPs about each others existence.
+ */
+static struct i2o_dma i2o_systab;
+
+static int i2o_hrt_get(struct i2o_controller *c);
+
+/* Module internal functions from other sources */
+extern struct i2o_driver i2o_exec_driver;
+extern int i2o_exec_lct_get(struct i2o_controller *);
+extern void i2o_device_remove(struct i2o_device *);
+
+extern int __init i2o_driver_init(void);
+extern void __exit i2o_driver_exit(void);
+extern int __init i2o_exec_init(void);
+extern void __exit i2o_exec_exit(void);
+extern int __init i2o_pci_init(void);
+extern void __exit i2o_pci_exit(void);
+extern int i2o_device_init(void);
+extern void i2o_device_exit(void);
+
+/**
+ *	i2o_msg_nop - Returns a message which is not used
+ *	@c: I2O controller from which the message was created
+ *	@m: message which should be returned
+ *
+ *	If you fetch a message via i2o_msg_get, and can't use it, you must
+ *	return the message with this function. Otherwise the message frame
+ *	is lost.
+ */
+void i2o_msg_nop(struct i2o_controller *c, u32 m)
+{
+	struct i2o_message __iomem *msg = c->in_queue.virt + m;
+
+	writel(THREE_WORD_MSG_SIZE | SGL_OFFSET_0, &msg->u.head[0]);
+	writel(I2O_CMD_UTIL_NOP << 24 | HOST_TID << 12 | ADAPTER_TID,
+	       &msg->u.head[1]);
+	writel(0, &msg->u.head[2]);
+	writel(0, &msg->u.head[3]);
+	i2o_msg_post(c, m);
+};
+
+/**
+ *	i2o_msg_get_wait - obtain an I2O message from the IOP
+ *	@c: I2O controller
+ *	@msg: pointer to a I2O message pointer
+ *	@wait: how long to wait until timeout
+ *
+ *	This function waits up to wait seconds for a message slot to be
+ *	available.
+ *
+ *	On a success the message is returned and the pointer to the message is
+ *	set in msg. The returned message is the physical page frame offset
+ *	address from the read port (see the i2o spec). If no message is
+ *	available returns I2O_QUEUE_EMPTY and msg is leaved untouched.
+ */
+u32 i2o_msg_get_wait(struct i2o_controller *c, struct i2o_message __iomem **msg,
+		     int wait)
+{
+	unsigned long timeout = jiffies + wait * HZ;
+	u32 m;
+
+	while ((m = i2o_msg_get(c, msg)) == I2O_QUEUE_EMPTY) {
+		if (time_after(jiffies, timeout)) {
+			pr_debug("%s: Timeout waiting for message frame.\n",
+				 c->name);
+			return I2O_QUEUE_EMPTY;
+		}
+		set_current_state(TASK_UNINTERRUPTIBLE);
+		schedule_timeout(1);
+	}
+
+	return m;
+};
+
+#if BITS_PER_LONG == 64
+/**
+ *      i2o_cntxt_list_add - Append a pointer to context list and return a id
+ *	@c: controller to which the context list belong
+ *	@ptr: pointer to add to the context list
+ *
+ *	Because the context field in I2O is only 32-bit large, on 64-bit the
+ *	pointer is to large to fit in the context field. The i2o_cntxt_list
+ *	functions therefore map pointers to context fields.
+ *
+ *	Returns context id > 0 on success or 0 on failure.
+ */
+u32 i2o_cntxt_list_add(struct i2o_controller * c, void *ptr)
+{
+	struct i2o_context_list_element *entry;
+	unsigned long flags;
+
+	if (!ptr)
+		printk(KERN_ERR "%s: couldn't add NULL pointer to context list!"
+		       "\n", c->name);
+
+	entry = kmalloc(sizeof(*entry), GFP_ATOMIC);
+	if (!entry) {
+		printk(KERN_ERR "%s: Could not allocate memory for context "
+		       "list element\n", c->name);
+		return 0;
+	}
+
+	entry->ptr = ptr;
+	entry->timestamp = jiffies;
+	INIT_LIST_HEAD(&entry->list);
+
+	spin_lock_irqsave(&c->context_list_lock, flags);
+
+	if (unlikely(atomic_inc_and_test(&c->context_list_counter)))
+		atomic_inc(&c->context_list_counter);
+
+	entry->context = atomic_read(&c->context_list_counter);
+
+	list_add(&entry->list, &c->context_list);
+
+	spin_unlock_irqrestore(&c->context_list_lock, flags);
+
+	pr_debug("%s: Add context to list %p -> %d\n", c->name, ptr, context);
+
+	return entry->context;
+};
+
+/**
+ *      i2o_cntxt_list_remove - Remove a pointer from the context list
+ *	@c: controller to which the context list belong
+ *	@ptr: pointer which should be removed from the context list
+ *
+ *	Removes a previously added pointer from the context list and returns
+ *	the matching context id.
+ *
+ *	Returns context id on succes or 0 on failure.
+ */
+u32 i2o_cntxt_list_remove(struct i2o_controller * c, void *ptr)
+{
+	struct i2o_context_list_element *entry;
+	u32 context = 0;
+	unsigned long flags;
+
+	spin_lock_irqsave(&c->context_list_lock, flags);
+	list_for_each_entry(entry, &c->context_list, list)
+	    if (entry->ptr == ptr) {
+		list_del(&entry->list);
+		context = entry->context;
+		kfree(entry);
+		break;
+	}
+	spin_unlock_irqrestore(&c->context_list_lock, flags);
+
+	if (!context)
+		printk(KERN_WARNING "%s: Could not remove nonexistent ptr "
+		       "%p\n", c->name, ptr);
+
+	pr_debug("%s: remove ptr from context list %d -> %p\n", c->name,
+		 context, ptr);
+
+	return context;
+};
+
+/**
+ *      i2o_cntxt_list_get - Get a pointer from the context list and remove it
+ *	@c: controller to which the context list belong
+ *	@context: context id to which the pointer belong
+ *
+ *	Returns pointer to the matching context id on success or NULL on
+ *	failure.
+ */
+void *i2o_cntxt_list_get(struct i2o_controller *c, u32 context)
+{
+	struct i2o_context_list_element *entry;
+	unsigned long flags;
+	void *ptr = NULL;
+
+	spin_lock_irqsave(&c->context_list_lock, flags);
+	list_for_each_entry(entry, &c->context_list, list)
+	    if (entry->context == context) {
+		list_del(&entry->list);
+		ptr = entry->ptr;
+		kfree(entry);
+		break;
+	}
+	spin_unlock_irqrestore(&c->context_list_lock, flags);
+
+	if (!ptr)
+		printk(KERN_WARNING "%s: context id %d not found\n", c->name,
+		       context);
+
+	pr_debug("%s: get ptr from context list %d -> %p\n", c->name, context,
+		 ptr);
+
+	return ptr;
+};
+
+/**
+ *      i2o_cntxt_list_get_ptr - Get a context id from the context list
+ *	@c: controller to which the context list belong
+ *	@ptr: pointer to which the context id should be fetched
+ *
+ *	Returns context id which matches to the pointer on succes or 0 on
+ *	failure.
+ */
+u32 i2o_cntxt_list_get_ptr(struct i2o_controller * c, void *ptr)
+{
+	struct i2o_context_list_element *entry;
+	u32 context = 0;
+	unsigned long flags;
+
+	spin_lock_irqsave(&c->context_list_lock, flags);
+	list_for_each_entry(entry, &c->context_list, list)
+	    if (entry->ptr == ptr) {
+		context = entry->context;
+		break;
+	}
+	spin_unlock_irqrestore(&c->context_list_lock, flags);
+
+	if (!context)
+		printk(KERN_WARNING "%s: Could not find nonexistent ptr "
+		       "%p\n", c->name, ptr);
+
+	pr_debug("%s: get context id from context list %p -> %d\n", c->name,
+		 ptr, context);
+
+	return context;
+};
+#endif
+
+/**
+ *	i2o_iop_find - Find an I2O controller by id
+ *	@unit: unit number of the I2O controller to search for
+ *
+ *	Lookup the I2O controller on the controller list.
+ *
+ *	Returns pointer to the I2O controller on success or NULL if not found.
+ */
+struct i2o_controller *i2o_find_iop(int unit)
+{
+	struct i2o_controller *c;
+
+	list_for_each_entry(c, &i2o_controllers, list) {
+		if (c->unit == unit)
+			return c;
+	}
+
+	return NULL;
+};
+
+/**
+ *	i2o_iop_find_device - Find a I2O device on an I2O controller
+ *	@c: I2O controller where the I2O device hangs on
+ *	@tid: TID of the I2O device to search for
+ *
+ *	Searches the devices of the I2O controller for a device with TID tid and
+ *	returns it.
+ *
+ *	Returns a pointer to the I2O device if found, otherwise NULL.
+ */
+struct i2o_device *i2o_iop_find_device(struct i2o_controller *c, u16 tid)
+{
+	struct i2o_device *dev;
+
+	list_for_each_entry(dev, &c->devices, list)
+	    if (dev->lct_data.tid == tid)
+		return dev;
+
+	return NULL;
+};
+
+/**
+ *	i2o_quiesce_controller - quiesce controller
+ *	@c: controller
+ *
+ *	Quiesce an IOP. Causes IOP to make external operation quiescent
+ *	(i2o 'READY' state). Internal operation of the IOP continues normally.
+ *
+ *	Returns 0 on success or negative error code on failure.
+ */
+static int i2o_iop_quiesce(struct i2o_controller *c)
+{
+	struct i2o_message __iomem *msg;
+	u32 m;
+	i2o_status_block *sb = c->status_block.virt;
+	int rc;
+
+	i2o_status_get(c);
+
+	/* SysQuiesce discarded if IOP not in READY or OPERATIONAL state */
+	if ((sb->iop_state != ADAPTER_STATE_READY) &&
+	    (sb->iop_state != ADAPTER_STATE_OPERATIONAL))
+		return 0;
+
+	m = i2o_msg_get_wait(c, &msg, I2O_TIMEOUT_MESSAGE_GET);
+	if (m == I2O_QUEUE_EMPTY)
+		return -ETIMEDOUT;
+
+	writel(FOUR_WORD_MSG_SIZE | SGL_OFFSET_0, &msg->u.head[0]);
+	writel(I2O_CMD_SYS_QUIESCE << 24 | HOST_TID << 12 | ADAPTER_TID,
+	       &msg->u.head[1]);
+
+	/* Long timeout needed for quiesce if lots of devices */
+	if ((rc = i2o_msg_post_wait(c, m, 240)))
+		printk(KERN_INFO "%s: Unable to quiesce (status=%#x).\n",
+		       c->name, -rc);
+	else
+		pr_debug("%s: Quiesced.\n", c->name);
+
+	i2o_status_get(c);	// Entered READY state
+
+	return rc;
+};
+
+/**
+ *	i2o_iop_enable - move controller from ready to OPERATIONAL
+ *	@c: I2O controller
+ *
+ *	Enable IOP. This allows the IOP to resume external operations and
+ *	reverses the effect of a quiesce. Returns zero or an error code if
+ *	an error occurs.
+ */
+static int i2o_iop_enable(struct i2o_controller *c)
+{
+	struct i2o_message __iomem *msg;
+	u32 m;
+	i2o_status_block *sb = c->status_block.virt;
+	int rc;
+
+	i2o_status_get(c);
+
+	/* Enable only allowed on READY state */
+	if (sb->iop_state != ADAPTER_STATE_READY)
+		return -EINVAL;
+
+	m = i2o_msg_get_wait(c, &msg, I2O_TIMEOUT_MESSAGE_GET);
+	if (m == I2O_QUEUE_EMPTY)
+		return -ETIMEDOUT;
+
+	writel(FOUR_WORD_MSG_SIZE | SGL_OFFSET_0, &msg->u.head[0]);
+	writel(I2O_CMD_SYS_ENABLE << 24 | HOST_TID << 12 | ADAPTER_TID,
+	       &msg->u.head[1]);
+
+	/* How long of a timeout do we need? */
+	if ((rc = i2o_msg_post_wait(c, m, 240)))
+		printk(KERN_ERR "%s: Could not enable (status=%#x).\n",
+		       c->name, -rc);
+	else
+		pr_debug("%s: Enabled.\n", c->name);
+
+	i2o_status_get(c);	// entered OPERATIONAL state
+
+	return rc;
+};
+
+/**
+ *	i2o_iop_quiesce_all - Quiesce all I2O controllers on the system
+ *
+ *	Quiesce all I2O controllers which are connected to the system.
+ */
+static inline void i2o_iop_quiesce_all(void)
+{
+	struct i2o_controller *c, *tmp;
+
+	list_for_each_entry_safe(c, tmp, &i2o_controllers, list) {
+		if (!c->no_quiesce)
+			i2o_iop_quiesce(c);
+	}
+};
+
+/**
+ *	i2o_iop_enable_all - Enables all controllers on the system
+ *
+ *	Enables all I2O controllers which are connected to the system.
+ */
+static inline void i2o_iop_enable_all(void)
+{
+	struct i2o_controller *c, *tmp;
+
+	list_for_each_entry_safe(c, tmp, &i2o_controllers, list)
+	    i2o_iop_enable(c);
+};
+
+/**
+ *	i2o_clear_controller - Bring I2O controller into HOLD state
+ *	@c: controller
+ *
+ *	Clear an IOP to HOLD state, ie. terminate external operations, clear all
+ *	input queues and prepare for a system restart. IOP's internal operation
+ *	continues normally and the outbound queue is alive. The IOP is not
+ *	expected to rebuild its LCT.
+ *
+ *	Returns 0 on success or negative error code on failure.
+ */
+static int i2o_iop_clear(struct i2o_controller *c)
+{
+	struct i2o_message __iomem *msg;
+	u32 m;
+	int rc;
+
+	m = i2o_msg_get_wait(c, &msg, I2O_TIMEOUT_MESSAGE_GET);
+	if (m == I2O_QUEUE_EMPTY)
+		return -ETIMEDOUT;
+
+	/* Quiesce all IOPs first */
+	i2o_iop_quiesce_all();
+
+	writel(FOUR_WORD_MSG_SIZE | SGL_OFFSET_0, &msg->u.head[0]);
+	writel(I2O_CMD_ADAPTER_CLEAR << 24 | HOST_TID << 12 | ADAPTER_TID,
+	       &msg->u.head[1]);
+
+	if ((rc = i2o_msg_post_wait(c, m, 30)))
+		printk(KERN_INFO "%s: Unable to clear (status=%#x).\n",
+		       c->name, -rc);
+	else
+		pr_debug("%s: Cleared.\n", c->name);
+
+	/* Enable all IOPs */
+	i2o_iop_enable_all();
+
+	i2o_status_get(c);
+
+	return rc;
+}
+
+/**
+ *	i2o_iop_reset - reset an I2O controller
+ *	@c: controller to reset
+ *
+ *	Reset the IOP into INIT state and wait until IOP gets into RESET state.
+ *	Terminate all external operations, clear IOP's inbound and outbound
+ *	queues, terminate all DDMs, and reload the IOP's operating environment
+ *	and all local DDMs. The IOP rebuilds its LCT.
+ */
+static int i2o_iop_reset(struct i2o_controller *c)
+{
+	u8 *status = c->status.virt;
+	struct i2o_message __iomem *msg;
+	u32 m;
+	unsigned long timeout;
+	i2o_status_block *sb = c->status_block.virt;
+	int rc = 0;
+
+	pr_debug("%s: Resetting controller\n", c->name);
+
+	m = i2o_msg_get_wait(c, &msg, I2O_TIMEOUT_MESSAGE_GET);
+	if (m == I2O_QUEUE_EMPTY)
+		return -ETIMEDOUT;
+
+	memset(status, 0, 8);
+
+	/* Quiesce all IOPs first */
+	i2o_iop_quiesce_all();
+
+	writel(EIGHT_WORD_MSG_SIZE | SGL_OFFSET_0, &msg->u.head[0]);
+	writel(I2O_CMD_ADAPTER_RESET << 24 | HOST_TID << 12 | ADAPTER_TID,
+	       &msg->u.head[1]);
+	writel(i2o_exec_driver.context, &msg->u.s.icntxt);
+	writel(0, &msg->u.s.tcntxt);	//FIXME: use reasonable transaction context
+	writel(0, &msg->body[0]);
+	writel(0, &msg->body[1]);
+	writel(i2o_ptr_low((void *)c->status.phys), &msg->body[2]);
+	writel(i2o_ptr_high((void *)c->status.phys), &msg->body[3]);
+
+	i2o_msg_post(c, m);
+
+	/* Wait for a reply */
+	timeout = jiffies + I2O_TIMEOUT_RESET * HZ;
+	while (!*status) {
+		if (time_after(jiffies, timeout)) {
+			printk(KERN_ERR "%s: IOP reset timeout.\n", c->name);
+			rc = -ETIMEDOUT;
+			goto exit;
+		}
+
+		/* Promise bug */
+		if (status[1] || status[4]) {
+			*status = 0;
+			break;
+		}
+
+		set_current_state(TASK_UNINTERRUPTIBLE);
+		schedule_timeout(1);
+
+		rmb();
+	}
+
+	if (*status == I2O_CMD_IN_PROGRESS) {
+		/*
+		 * Once the reset is sent, the IOP goes into the INIT state
+		 * which is indeterminate.  We need to wait until the IOP
+		 * has rebooted before we can let the system talk to
+		 * it. We read the inbound Free_List until a message is
+		 * available. If we can't read one in the given ammount of
+		 * time, we assume the IOP could not reboot properly.
+		 */
+		pr_debug("%s: Reset in progress, waiting for reboot...\n",
+			 c->name);
+
+		m = i2o_msg_get_wait(c, &msg, I2O_TIMEOUT_RESET);
+		while (m == I2O_QUEUE_EMPTY) {
+			if (time_after(jiffies, timeout)) {
+				printk(KERN_ERR "%s: IOP reset timeout.\n",
+				       c->name);
+				rc = -ETIMEDOUT;
+				goto exit;
+			}
+			set_current_state(TASK_UNINTERRUPTIBLE);
+			schedule_timeout(1);
+
+			m = i2o_msg_get_wait(c, &msg, I2O_TIMEOUT_RESET);
+		}
+		i2o_msg_nop(c, m);
+	}
+
+	/* from here all quiesce commands are safe */
+	c->no_quiesce = 0;
+
+	/* If IopReset was rejected or didn't perform reset, try IopClear */
+	i2o_status_get(c);
+	if (*status == I2O_CMD_REJECTED || sb->iop_state != ADAPTER_STATE_RESET) {
+		printk(KERN_WARNING "%s: Reset rejected, trying to clear\n",
+		       c->name);
+		i2o_iop_clear(c);
+	} else
+		pr_debug("%s: Reset completed.\n", c->name);
+
+      exit:
+	/* Enable all IOPs */
+	i2o_iop_enable_all();
+
+	return rc;
+};
+
+/**
+ *	i2o_iop_init_outbound_queue - setup the outbound message queue
+ *	@c: I2O controller
+ *
+ *	Clear and (re)initialize IOP's outbound queue and post the message
+ *	frames to the IOP.
+ *
+ *	Returns 0 on success or a negative errno code on failure.
+ */
+static int i2o_iop_init_outbound_queue(struct i2o_controller *c)
+{
+	u8 *status = c->status.virt;
+	u32 m;
+	struct i2o_message __iomem *msg;
+	ulong timeout;
+	int i;
+
+	pr_debug("%s: Initializing Outbound Queue...\n", c->name);
+
+	memset(status, 0, 4);
+
+	m = i2o_msg_get_wait(c, &msg, I2O_TIMEOUT_MESSAGE_GET);
+	if (m == I2O_QUEUE_EMPTY)
+		return -ETIMEDOUT;
+
+	writel(EIGHT_WORD_MSG_SIZE | TRL_OFFSET_6, &msg->u.head[0]);
+	writel(I2O_CMD_OUTBOUND_INIT << 24 | HOST_TID << 12 | ADAPTER_TID,
+	       &msg->u.head[1]);
+	writel(i2o_exec_driver.context, &msg->u.s.icntxt);
+	writel(0x0106, &msg->u.s.tcntxt);	/* FIXME: why 0x0106, maybe in
+						   Spec? */
+	writel(PAGE_SIZE, &msg->body[0]);
+	writel(MSG_FRAME_SIZE << 16 | 0x80, &msg->body[1]);	/* Outbound msg frame
+								   size in words and Initcode */
+	writel(0xd0000004, &msg->body[2]);
+	writel(i2o_ptr_low((void *)c->status.phys), &msg->body[3]);
+	writel(i2o_ptr_high((void *)c->status.phys), &msg->body[4]);
+
+	i2o_msg_post(c, m);
+
+	timeout = jiffies + I2O_TIMEOUT_INIT_OUTBOUND_QUEUE * HZ;
+	while (*status <= I2O_CMD_IN_PROGRESS) {
+		if (time_after(jiffies, timeout)) {
+			printk(KERN_WARNING "%s: Timeout Initializing\n",
+			       c->name);
+			return -ETIMEDOUT;
+		}
+		set_current_state(TASK_UNINTERRUPTIBLE);
+		schedule_timeout(1);
+
+		rmb();
+	}
+
+	m = c->out_queue.phys;
+
+	/* Post frames */
+	for (i = 0; i < NMBR_MSG_FRAMES; i++) {
+		i2o_flush_reply(c, m);
+		udelay(1);	/* Promise */
+		m += MSG_FRAME_SIZE * 4;
+	}
+
+	return 0;
+}
+
+/**
+ *	i2o_iop_send_nop - send a core NOP message
+ *	@c: controller
+ *
+ *	Send a no-operation message with a reply set to cause no
+ *	action either. Needed for bringing up promise controllers.
+ */
+static int i2o_iop_send_nop(struct i2o_controller *c)
+{
+	struct i2o_message __iomem *msg;
+	u32 m = i2o_msg_get_wait(c, &msg, HZ);
+	if (m == I2O_QUEUE_EMPTY)
+		return -ETIMEDOUT;
+	i2o_msg_nop(c, m);
+	return 0;
+}
+
+/**
+ *	i2o_iop_activate - Bring controller up to HOLD
+ *	@c: controller
+ *
+ *	This function brings an I2O controller into HOLD state. The adapter
+ *	is reset if necessary and then the queues and resource table are read.
+ *
+ *	Returns 0 on success or negative error code on failure.
+ */
+static int i2o_iop_activate(struct i2o_controller *c)
+{
+	struct pci_dev *i960 = NULL;
+	i2o_status_block *sb = c->status_block.virt;
+	int rc;
+
+	if (c->promise) {
+		/* Beat up the hardware first of all */
+		i960 =
+		    pci_find_slot(c->pdev->bus->number,
+				  PCI_DEVFN(PCI_SLOT(c->pdev->devfn), 0));
+		if (i960)
+			pci_write_config_word(i960, 0x42, 0);
+
+		/* Follow this sequence precisely or the controller
+		   ceases to perform useful functions until reboot */
+		if ((rc = i2o_iop_send_nop(c)))
+			return rc;
+
+		if ((rc = i2o_iop_reset(c)))
+			return rc;
+	}
+
+	/* In INIT state, Wait Inbound Q to initialize (in i2o_status_get) */
+	/* In READY state, Get status */
+
+	rc = i2o_status_get(c);
+	if (rc) {
+		printk(KERN_INFO "%s: Unable to obtain status, "
+		       "attempting a reset.\n", c->name);
+		if (i2o_iop_reset(c))
+			return rc;
+	}
+
+	if (sb->i2o_version > I2OVER15) {
+		printk(KERN_ERR "%s: Not running version 1.5 of the I2O "
+		       "Specification.\n", c->name);
+		return -ENODEV;
+	}
+
+	switch (sb->iop_state) {
+	case ADAPTER_STATE_FAULTED:
+		printk(KERN_CRIT "%s: hardware fault\n", c->name);
+		return -ENODEV;
+
+	case ADAPTER_STATE_READY:
+	case ADAPTER_STATE_OPERATIONAL:
+	case ADAPTER_STATE_HOLD:
+	case ADAPTER_STATE_FAILED:
+		pr_debug("%s: already running, trying to reset...\n", c->name);
+		if (i2o_iop_reset(c))
+			return -ENODEV;
+	}
+
+	rc = i2o_iop_init_outbound_queue(c);
+	if (rc)
+		return rc;
+
+	if (c->promise) {
+		if ((rc = i2o_iop_send_nop(c)))
+			return rc;
+
+		if ((rc = i2o_status_get(c)))
+			return rc;
+
+		if (i960)
+			pci_write_config_word(i960, 0x42, 0x3FF);
+	}
+
+	/* In HOLD state */
+
+	rc = i2o_hrt_get(c);
+
+	return rc;
+};
+
+/**
+ *	i2o_iop_systab_set - Set the I2O System Table of the specified IOP
+ *	@c: I2O controller to which the system table should be send
+ *
+ *	Before the systab could be set i2o_systab_build() must be called.
+ *
+ *	Returns 0 on success or negative error code on failure.
+ */
+static int i2o_iop_systab_set(struct i2o_controller *c)
+{
+	struct i2o_message __iomem *msg;
+	u32 m;
+	i2o_status_block *sb = c->status_block.virt;
+	struct device *dev = &c->pdev->dev;
+	struct resource *root;
+	int rc;
+
+	if (sb->current_mem_size < sb->desired_mem_size) {
+		struct resource *res = &c->mem_resource;
+		res->name = c->pdev->bus->name;
+		res->flags = IORESOURCE_MEM;
+		res->start = 0;
+		res->end = 0;
+		printk(KERN_INFO "%s: requires private memory resources.\n",
+		       c->name);
+		root = pci_find_parent_resource(c->pdev, res);
+		if (root == NULL)
+			printk(KERN_WARNING "%s: Can't find parent resource!\n",
+			       c->name);
+		if (root && allocate_resource(root, res, sb->desired_mem_size, sb->desired_mem_size, sb->desired_mem_size, 1 << 20,	/* Unspecified, so use 1Mb and play safe */
+					      NULL, NULL) >= 0) {
+			c->mem_alloc = 1;
+			sb->current_mem_size = 1 + res->end - res->start;
+			sb->current_mem_base = res->start;
+			printk(KERN_INFO "%s: allocated %ld bytes of PCI memory"
+			       " at 0x%08lX.\n", c->name,
+			       1 + res->end - res->start, res->start);
+		}
+	}
+
+	if (sb->current_io_size < sb->desired_io_size) {
+		struct resource *res = &c->io_resource;
+		res->name = c->pdev->bus->name;
+		res->flags = IORESOURCE_IO;
+		res->start = 0;
+		res->end = 0;
+		printk(KERN_INFO "%s: requires private memory resources.\n",
+		       c->name);
+		root = pci_find_parent_resource(c->pdev, res);
+		if (root == NULL)
+			printk(KERN_WARNING "%s: Can't find parent resource!\n",
+			       c->name);
+		if (root && allocate_resource(root, res, sb->desired_io_size, sb->desired_io_size, sb->desired_io_size, 1 << 20,	/* Unspecified, so use 1Mb and play safe */
+					      NULL, NULL) >= 0) {
+			c->io_alloc = 1;
+			sb->current_io_size = 1 + res->end - res->start;
+			sb->current_mem_base = res->start;
+			printk(KERN_INFO "%s: allocated %ld bytes of PCI I/O at"
+			       " 0x%08lX.\n", c->name,
+			       1 + res->end - res->start, res->start);
+		}
+	}
+
+	m = i2o_msg_get_wait(c, &msg, I2O_TIMEOUT_MESSAGE_GET);
+	if (m == I2O_QUEUE_EMPTY)
+		return -ETIMEDOUT;
+
+	i2o_systab.phys = dma_map_single(dev, i2o_systab.virt, i2o_systab.len,
+					 PCI_DMA_TODEVICE);
+	if (!i2o_systab.phys) {
+		i2o_msg_nop(c, m);
+		return -ENOMEM;
+	}
+
+	writel(I2O_MESSAGE_SIZE(12) | SGL_OFFSET_6, &msg->u.head[0]);
+	writel(I2O_CMD_SYS_TAB_SET << 24 | HOST_TID << 12 | ADAPTER_TID,
+	       &msg->u.head[1]);
+
+	/*
+	 * Provide three SGL-elements:
+	 * System table (SysTab), Private memory space declaration and
+	 * Private i/o space declaration
+	 *
+	 * FIXME: is this still true?
+	 * Nasty one here. We can't use dma_alloc_coherent to send the
+	 * same table to everyone. We have to go remap it for them all
+	 */
+
+	writel(c->unit + 2, &msg->body[0]);
+	writel(0, &msg->body[1]);
+	writel(0x54000000 | i2o_systab.len, &msg->body[2]);
+	writel(i2o_systab.phys, &msg->body[3]);
+	writel(0x54000000 | sb->current_mem_size, &msg->body[4]);
+	writel(sb->current_mem_base, &msg->body[5]);
+	writel(0xd4000000 | sb->current_io_size, &msg->body[6]);
+	writel(sb->current_io_base, &msg->body[6]);
+
+	rc = i2o_msg_post_wait(c, m, 120);
+
+	dma_unmap_single(dev, i2o_systab.phys, i2o_systab.len,
+			 PCI_DMA_TODEVICE);
+
+	if (rc < 0)
+		printk(KERN_ERR "%s: Unable to set SysTab (status=%#x).\n",
+		       c->name, -rc);
+	else
+		pr_debug("%s: SysTab set.\n", c->name);
+
+	i2o_status_get(c);	// Entered READY state
+
+	return rc;
+}
+
+/**
+ *	i2o_iop_online - Bring a controller online into OPERATIONAL state.
+ *	@c: I2O controller
+ *
+ *	Send the system table and enable the I2O controller.
+ *
+ *	Returns 0 on success or negativer error code on failure.
+ */
+static int i2o_iop_online(struct i2o_controller *c)
+{
+	int rc;
+
+	rc = i2o_iop_systab_set(c);
+	if (rc)
+		return rc;
+
+	/* In READY state */
+	pr_debug("%s: Attempting to enable...\n", c->name);
+	rc = i2o_iop_enable(c);
+	if (rc)
+		return rc;
+
+	return 0;
+};
+
+/**
+ *	i2o_iop_remove - Remove the I2O controller from the I2O core
+ *	@c: I2O controller
+ *
+ *	Remove the I2O controller from the I2O core. If devices are attached to
+ *	the controller remove these also and finally reset the controller.
+ */
+void i2o_iop_remove(struct i2o_controller *c)
+{
+	struct i2o_device *dev, *tmp;
+
+	pr_debug("%s: deleting controller\n", c->name);
+
+	i2o_driver_notify_controller_remove_all(c);
+
+	list_del(&c->list);
+
+	list_for_each_entry_safe(dev, tmp, &c->devices, list)
+	    i2o_device_remove(dev);
+
+	/* Ask the IOP to switch to RESET state */
+	i2o_iop_reset(c);
+}
+
+/**
+ *	i2o_systab_build - Build system table
+ *
+ *	The system table contains information about all the IOPs in the system
+ *	(duh) and is used by the Executives on the IOPs to establish peer2peer
+ *	connections. We're not supporting peer2peer at the moment, but this
+ *	will be needed down the road for things like lan2lan forwarding.
+ *
+ *	Returns 0 on success or negative error code on failure.
+ */
+static int i2o_systab_build(void)
+{
+	struct i2o_controller *c, *tmp;
+	int num_controllers = 0;
+	u32 change_ind = 0;
+	int count = 0;
+	struct i2o_sys_tbl *systab = i2o_systab.virt;
+
+	list_for_each_entry_safe(c, tmp, &i2o_controllers, list)
+	    num_controllers++;
+
+	if (systab) {
+		change_ind = systab->change_ind;
+		kfree(i2o_systab.virt);
+	}
+
+	/* Header + IOPs */
+	i2o_systab.len = sizeof(struct i2o_sys_tbl) + num_controllers *
+	    sizeof(struct i2o_sys_tbl_entry);
+
+	systab = i2o_systab.virt = kmalloc(i2o_systab.len, GFP_KERNEL);
+	if (!systab) {
+		printk(KERN_ERR "i2o: unable to allocate memory for System "
+		       "Table\n");
+		return -ENOMEM;
+	}
+	memset(systab, 0, i2o_systab.len);
+
+	systab->version = I2OVERSION;
+	systab->change_ind = change_ind + 1;
+
+	list_for_each_entry_safe(c, tmp, &i2o_controllers, list) {
+		i2o_status_block *sb;
+
+		if (count >= num_controllers) {
+			printk(KERN_ERR "i2o: controller added while building "
+			       "system table\n");
+			break;
+		}
+
+		sb = c->status_block.virt;
+
+		/*
+		 * Get updated IOP state so we have the latest information
+		 *
+		 * We should delete the controller at this point if it
+		 * doesn't respond since if it's not on the system table
+		 * it is techninically not part of the I2O subsystem...
+		 */
+		if (unlikely(i2o_status_get(c))) {
+			printk(KERN_ERR "%s: Deleting b/c could not get status"
+			       " while attempting to build system table\n",
+			       c->name);
+			i2o_iop_remove(c);
+			continue;	// try the next one
+		}
+
+		systab->iops[count].org_id = sb->org_id;
+		systab->iops[count].iop_id = c->unit + 2;
+		systab->iops[count].seg_num = 0;
+		systab->iops[count].i2o_version = sb->i2o_version;
+		systab->iops[count].iop_state = sb->iop_state;
+		systab->iops[count].msg_type = sb->msg_type;
+		systab->iops[count].frame_size = sb->inbound_frame_size;
+		systab->iops[count].last_changed = change_ind;
+		systab->iops[count].iop_capabilities = sb->iop_capabilities;
+		systab->iops[count].inbound_low = i2o_ptr_low(c->post_port);
+		systab->iops[count].inbound_high = i2o_ptr_high(c->post_port);
+
+		count++;
+	}
+
+	systab->num_entries = count;
+
+	return 0;
+};
+
+/**
+ *	i2o_parse_hrt - Parse the hardware resource table.
+ *	@c: I2O controller
+ *
+ *	We don't do anything with it except dumping it (in debug mode).
+ *
+ *	Returns 0.
+ */
+static int i2o_parse_hrt(struct i2o_controller *c)
+{
+	i2o_dump_hrt(c);
+	return 0;
+};
+
+/**
+ *	i2o_status_get - Get the status block from the I2O controller
+ *	@c: I2O controller
+ *
+ *	Issue a status query on the controller. This updates the attached
+ *	status block. The status block could then be accessed through
+ *	c->status_block.
+ *
+ *	Returns 0 on sucess or negative error code on failure.
+ */
+int i2o_status_get(struct i2o_controller *c)
+{
+	struct i2o_message __iomem *msg;
+	u32 m;
+	u8 *status_block;
+	unsigned long timeout;
+
+	status_block = (u8 *) c->status_block.virt;
+	memset(status_block, 0, sizeof(i2o_status_block));
+
+	m = i2o_msg_get_wait(c, &msg, I2O_TIMEOUT_MESSAGE_GET);
+	if (m == I2O_QUEUE_EMPTY)
+		return -ETIMEDOUT;
+
+	writel(NINE_WORD_MSG_SIZE | SGL_OFFSET_0, &msg->u.head[0]);
+	writel(I2O_CMD_STATUS_GET << 24 | HOST_TID << 12 | ADAPTER_TID,
+	       &msg->u.head[1]);
+	writel(i2o_exec_driver.context, &msg->u.s.icntxt);
+	writel(0, &msg->u.s.tcntxt);	// FIXME: use resonable transaction context
+	writel(0, &msg->body[0]);
+	writel(0, &msg->body[1]);
+	writel(i2o_ptr_low((void *)c->status_block.phys), &msg->body[2]);
+	writel(i2o_ptr_high((void *)c->status_block.phys), &msg->body[3]);
+	writel(sizeof(i2o_status_block), &msg->body[4]);	/* always 88 bytes */
+
+	i2o_msg_post(c, m);
+
+	/* Wait for a reply */
+	timeout = jiffies + I2O_TIMEOUT_STATUS_GET * HZ;
+	while (status_block[87] != 0xFF) {
+		if (time_after(jiffies, timeout)) {
+			printk(KERN_ERR "%s: Get status timeout.\n", c->name);
+			return -ETIMEDOUT;
+		}
+
+		set_current_state(TASK_UNINTERRUPTIBLE);
+		schedule_timeout(1);
+
+		rmb();
+	}
+
+#ifdef DEBUG
+	i2o_debug_state(c);
+#endif
+
+	return 0;
+}
+
+/*
+ *	i2o_hrt_get - Get the Hardware Resource Table from the I2O controller
+ *	@c: I2O controller from which the HRT should be fetched
+ *
+ *	The HRT contains information about possible hidden devices but is
+ *	mostly useless to us.
+ *
+ *	Returns 0 on success or negativer error code on failure.
+ */
+static int i2o_hrt_get(struct i2o_controller *c)
+{
+	int rc;
+	int i;
+	i2o_hrt *hrt = c->hrt.virt;
+	u32 size = sizeof(i2o_hrt);
+	struct device *dev = &c->pdev->dev;
+
+	for (i = 0; i < I2O_HRT_GET_TRIES; i++) {
+		struct i2o_message __iomem *msg;
+		u32 m;
+
+		m = i2o_msg_get_wait(c, &msg, I2O_TIMEOUT_MESSAGE_GET);
+		if (m == I2O_QUEUE_EMPTY)
+			return -ETIMEDOUT;
+
+		writel(SIX_WORD_MSG_SIZE | SGL_OFFSET_4, &msg->u.head[0]);
+		writel(I2O_CMD_HRT_GET << 24 | HOST_TID << 12 | ADAPTER_TID,
+		       &msg->u.head[1]);
+		writel(0xd0000000 | c->hrt.len, &msg->body[0]);
+		writel(c->hrt.phys, &msg->body[1]);
+
+		rc = i2o_msg_post_wait_mem(c, m, 20, &c->hrt);
+
+		if (rc < 0) {
+			printk(KERN_ERR "%s: Unable to get HRT (status=%#x)\n",
+			       c->name, -rc);
+			return rc;
+		}
+
+		size = hrt->num_entries * hrt->entry_len << 2;
+		if (size > c->hrt.len) {
+			if (i2o_dma_realloc(dev, &c->hrt, size, GFP_KERNEL))
+				return -ENOMEM;
+			else
+				hrt = c->hrt.virt;
+		} else
+			return i2o_parse_hrt(c);
+	}
+
+	printk(KERN_ERR "%s: Unable to get HRT after %d tries, giving up\n",
+	       c->name, I2O_HRT_GET_TRIES);
+
+	return -EBUSY;
+}
+
+/**
+ *	i2o_iop_alloc - Allocate and initialize a i2o_controller struct
+ *
+ *	Allocate the necessary memory for a i2o_controller struct and
+ *	initialize the lists.
+ *
+ *	Returns a pointer to the I2O controller or a negative error code on
+ *	failure.
+ */
+struct i2o_controller *i2o_iop_alloc(void)
+{
+	static int unit = 0;	/* 0 and 1 are NULL IOP and Local Host */
+	struct i2o_controller *c;
+
+	c = kmalloc(sizeof(*c), GFP_KERNEL);
+	if (!c) {
+		printk(KERN_ERR "i2o: Insufficient memory to allocate a I2O "
+		       "controller.\n");
+		return ERR_PTR(-ENOMEM);
+	}
+	memset(c, 0, sizeof(*c));
+
+	INIT_LIST_HEAD(&c->devices);
+	spin_lock_init(&c->lock);
+	init_MUTEX(&c->lct_lock);
+	c->unit = unit++;
+	sprintf(c->name, "iop%d", c->unit);
+
+#if BITS_PER_LONG == 64
+	spin_lock_init(&c->context_list_lock);
+	atomic_set(&c->context_list_counter, 0);
+	INIT_LIST_HEAD(&c->context_list);
+#endif
+
+	return c;
+};
+
+/**
+ *	i2o_iop_free - Free the i2o_controller struct
+ *	@c: I2O controller to free
+ */
+void i2o_iop_free(struct i2o_controller *c)
+{
+	kfree(c);
+};
+
+/**
+ *	i2o_iop_add - Initialize the I2O controller and add him to the I2O core
+ *	@c: controller
+ *
+ *	Initialize the I2O controller and if no error occurs add him to the I2O
+ *	core.
+ *
+ *	Returns 0 on success or negative error code on failure.
+ */
+int i2o_iop_add(struct i2o_controller *c)
+{
+	int rc;
+
+	printk(KERN_INFO "%s: Activating I2O controller...\n", c->name);
+	printk(KERN_INFO "%s: This may take a few minutes if there are many "
+	       "devices\n", c->name);
+
+	if ((rc = i2o_iop_activate(c))) {
+		printk(KERN_ERR "%s: could not activate controller\n",
+		       c->name);
+		i2o_iop_reset(c);
+		return rc;
+	}
+
+	pr_debug("%s: building sys table...\n", c->name);
+
+	if ((rc = i2o_systab_build())) {
+		i2o_iop_reset(c);
+		return rc;
+	}
+
+	pr_debug("%s: online controller...\n", c->name);
+
+	if ((rc = i2o_iop_online(c))) {
+		i2o_iop_reset(c);
+		return rc;
+	}
+
+	pr_debug("%s: getting LCT...\n", c->name);
+
+	if ((rc = i2o_exec_lct_get(c))) {
+		i2o_iop_reset(c);
+		return rc;
+	}
+
+	list_add(&c->list, &i2o_controllers);
+
+	i2o_driver_notify_controller_add_all(c);
+
+	printk(KERN_INFO "%s: Controller added\n", c->name);
+
+	return 0;
+};
+
+/**
+ *	i2o_event_register - Turn on/off event notification for a I2O device
+ *	@dev: I2O device which should receive the event registration request
+ *	@drv: driver which want to get notified
+ *	@tcntxt: transaction context to use with this notifier
+ *	@evt_mask: mask of events
+ *
+ *	Create and posts an event registration message to the task. No reply
+ *	is waited for, or expected. If you do not want further notifications,
+ *	call the i2o_event_register again with a evt_mask of 0.
+ *
+ *	Returns 0 on success or -ETIMEDOUT if no message could be fetched for
+ *	sending the request.
+ */
+int i2o_event_register(struct i2o_device *dev, struct i2o_driver *drv,
+		       int tcntxt, u32 evt_mask)
+{
+	struct i2o_controller *c = dev->iop;
+	struct i2o_message __iomem *msg;
+	u32 m;
+
+	m = i2o_msg_get_wait(c, &msg, I2O_TIMEOUT_MESSAGE_GET);
+	if (m == I2O_QUEUE_EMPTY)
+		return -ETIMEDOUT;
+
+	writel(FIVE_WORD_MSG_SIZE | SGL_OFFSET_0, &msg->u.head[0]);
+	writel(I2O_CMD_UTIL_EVT_REGISTER << 24 | HOST_TID << 12 | dev->lct_data.
+	       tid, &msg->u.head[1]);
+	writel(drv->context, &msg->u.s.icntxt);
+	writel(tcntxt, &msg->u.s.tcntxt);
+	writel(evt_mask, &msg->body[0]);
+
+	i2o_msg_post(c, m);
+
+	return 0;
+};
+
+/**
+ *	i2o_iop_init - I2O main initialization function
+ *
+ *	Initialize the I2O drivers (OSM) functions, register the Executive OSM,
+ *	initialize the I2O PCI part and finally initialize I2O device stuff.
+ *
+ *	Returns 0 on success or negative error code on failure.
+ */
+static int __init i2o_iop_init(void)
+{
+	int rc = 0;
+
+	printk(KERN_INFO OSM_DESCRIPTION " v" OSM_VERSION "\n");
+
+	rc = i2o_device_init();
+	if (rc)
+		goto exit;
+
+	rc = i2o_driver_init();
+	if (rc)
+		goto device_exit;
+
+	rc = i2o_exec_init();
+	if (rc)
+		goto driver_exit;
+
+	rc = i2o_pci_init();
+	if (rc < 0)
+		goto exec_exit;
+
+	return 0;
+
+      exec_exit:
+	i2o_exec_exit();
+
+      driver_exit:
+	i2o_driver_exit();
+
+      device_exit:
+	i2o_device_exit();
+
+      exit:
+	return rc;
+}
+
+/**
+ *	i2o_iop_exit - I2O main exit function
+ *
+ *	Removes I2O controllers from PCI subsystem and shut down OSMs.
+ */
+static void __exit i2o_iop_exit(void)
+{
+	i2o_pci_exit();
+	i2o_exec_exit();
+	i2o_driver_exit();
+	i2o_device_exit();
+};
+
+module_init(i2o_iop_init);
+module_exit(i2o_iop_exit);
+
+MODULE_AUTHOR("Red Hat Software");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION(OSM_DESCRIPTION);
+MODULE_VERSION(OSM_VERSION);
+
+#if BITS_PER_LONG == 64
+EXPORT_SYMBOL(i2o_cntxt_list_add);
+EXPORT_SYMBOL(i2o_cntxt_list_get);
+EXPORT_SYMBOL(i2o_cntxt_list_remove);
+EXPORT_SYMBOL(i2o_cntxt_list_get_ptr);
+#endif
+EXPORT_SYMBOL(i2o_msg_get_wait);
+EXPORT_SYMBOL(i2o_msg_nop);
+EXPORT_SYMBOL(i2o_find_iop);
+EXPORT_SYMBOL(i2o_iop_find_device);
+EXPORT_SYMBOL(i2o_event_register);
+EXPORT_SYMBOL(i2o_status_get);
+EXPORT_SYMBOL(i2o_controllers);