Merge commit 'v2.6.39-rc4' into next

17 files changed, 69 insertions, 49 deletions

diff --git a/drivers/message/fusion/Makefile b/drivers/message/fusion/Makefile
index 95c9532cb07..d182a24b319 100644
--- a/drivers/message/fusion/Makefile
+++ b/drivers/message/fusion/Makefile
@@ -2,7 +2,7 @@
 
 # enable verbose logging
 # CONFIG_FUSION_LOGGING needs to be enabled in Kconfig
-#EXTRA_CFLAGS += -DMPT_DEBUG_VERBOSE
+#ccflags-y := -DMPT_DEBUG_VERBOSE
 
 
 #=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-} LSI_LOGIC
diff --git a/drivers/message/fusion/lsi/mpi_cnfg.h b/drivers/message/fusion/lsi/mpi_cnfg.h
index 013c7d88194..22027e7946f 100644
--- a/drivers/message/fusion/lsi/mpi_cnfg.h
+++ b/drivers/message/fusion/lsi/mpi_cnfg.h
@@ -2593,6 +2593,7 @@ typedef struct _CONFIG_PAGE_SAS_IO_UNIT_0
 #define MPI_SAS_IOUNIT0_RATE_SATA_OOB_COMPLETE              (0x03)
 #define MPI_SAS_IOUNIT0_RATE_1_5                            (0x08)
 #define MPI_SAS_IOUNIT0_RATE_3_0                            (0x09)
+#define MPI_SAS_IOUNIT0_RATE_6_0                            (0x0A)
 
 /* see mpi_sas.h for values for SAS IO Unit Page 0 ControllerPhyDeviceInfo values */
 
diff --git a/drivers/message/fusion/lsi/mpi_ioc.h b/drivers/message/fusion/lsi/mpi_ioc.h
index 8faa4fab7b8..fd6222882a0 100644
--- a/drivers/message/fusion/lsi/mpi_ioc.h
+++ b/drivers/message/fusion/lsi/mpi_ioc.h
@@ -841,6 +841,7 @@ typedef struct _EVENT_DATA_SAS_PHY_LINK_STATUS
 #define MPI_EVENT_SAS_PLS_LR_RATE_SATA_OOB_COMPLETE         (0x03)
 #define MPI_EVENT_SAS_PLS_LR_RATE_1_5                       (0x08)
 #define MPI_EVENT_SAS_PLS_LR_RATE_3_0                       (0x09)
+#define MPI_EVENT_SAS_PLS_LR_RATE_6_0                       (0x0A)
 
 /* SAS Discovery Event data */
 
diff --git a/drivers/message/fusion/lsi/mpi_log_fc.h b/drivers/message/fusion/lsi/mpi_log_fc.h
index face6e7acc7..03be8b21770 100644
--- a/drivers/message/fusion/lsi/mpi_log_fc.h
+++ b/drivers/message/fusion/lsi/mpi_log_fc.h
@@ -38,8 +38,8 @@ typedef enum _MpiIocLogInfoFc
 {
     MPI_IOCLOGINFO_FC_INIT_BASE                     = 0x20000000,
     MPI_IOCLOGINFO_FC_INIT_ERROR_OUT_OF_ORDER_FRAME = 0x20000001, /* received an out of order frame - unsupported */
-    MPI_IOCLOGINFO_FC_INIT_ERROR_BAD_START_OF_FRAME = 0x20000002, /* Bad Rx Frame, bad start of frame primative */
-    MPI_IOCLOGINFO_FC_INIT_ERROR_BAD_END_OF_FRAME   = 0x20000003, /* Bad Rx Frame, bad end of frame primative */
+    MPI_IOCLOGINFO_FC_INIT_ERROR_BAD_START_OF_FRAME = 0x20000002, /* Bad Rx Frame, bad start of frame primitive */
+    MPI_IOCLOGINFO_FC_INIT_ERROR_BAD_END_OF_FRAME   = 0x20000003, /* Bad Rx Frame, bad end of frame primitive */
     MPI_IOCLOGINFO_FC_INIT_ERROR_OVER_RUN           = 0x20000004, /* Bad Rx Frame, overrun */
     MPI_IOCLOGINFO_FC_INIT_ERROR_RX_OTHER           = 0x20000005, /* Other errors caught by IOC which require retries */
     MPI_IOCLOGINFO_FC_INIT_ERROR_SUBPROC_DEAD       = 0x20000006, /* Main processor could not initialize sub-processor */
diff --git a/drivers/message/fusion/lsi/mpi_log_sas.h b/drivers/message/fusion/lsi/mpi_log_sas.h
index 8b04810df46..f62960b5d52 100644
--- a/drivers/message/fusion/lsi/mpi_log_sas.h
+++ b/drivers/message/fusion/lsi/mpi_log_sas.h
@@ -56,9 +56,9 @@
 #define IOP_LOGINFO_CODE_FWUPLOAD_NO_FLASH_AVAILABLE         (0x0003E000) /* Tried to upload from flash, but there is none */
 #define IOP_LOGINFO_CODE_FWUPLOAD_UNKNOWN_IMAGE_TYPE         (0x0003E001) /* ImageType field contents were invalid */
 #define IOP_LOGINFO_CODE_FWUPLOAD_WRONG_IMAGE_SIZE           (0x0003E002) /* ImageSize field in TCSGE was bad/offset in MfgPg 4 was wrong */
-#define IOP_LOGINFO_CODE_FWUPLOAD_ENTIRE_FLASH_UPLOAD_FAILED (0x0003E003) /* Error occured while attempting to upload the entire flash */
-#define IOP_LOGINFO_CODE_FWUPLOAD_REGION_UPLOAD_FAILED       (0x0003E004) /* Error occured while attempting to upload single flash region */
-#define IOP_LOGINFO_CODE_FWUPLOAD_DMA_FAILURE                (0x0003E005) /* Problem occured while DMAing FW to host memory */
+#define IOP_LOGINFO_CODE_FWUPLOAD_ENTIRE_FLASH_UPLOAD_FAILED (0x0003E003) /* Error occurred while attempting to upload the entire flash */
+#define IOP_LOGINFO_CODE_FWUPLOAD_REGION_UPLOAD_FAILED       (0x0003E004) /* Error occurred while attempting to upload single flash region */
+#define IOP_LOGINFO_CODE_FWUPLOAD_DMA_FAILURE                (0x0003E005) /* Problem occurred while DMAing FW to host memory */
 
 #define IOP_LOGINFO_CODE_DIAG_MSG_ERROR                      (0x00040000) /* Error handling diag msg - or'd with diag status */
 
@@ -187,8 +187,8 @@
 #define PL_LOGINFO_SUB_CODE_BREAK_ON_INCOMPLETE_BREAK_RCVD   (0x00005000)
 
 #define PL_LOGINFO_CODE_ENCL_MGMT_SMP_FRAME_FAILURE          (0x00200000) /* Can't get SMP Frame */
-#define PL_LOGINFO_CODE_ENCL_MGMT_SMP_READ_ERROR             (0x00200010) /* Error occured on SMP Read */
-#define PL_LOGINFO_CODE_ENCL_MGMT_SMP_WRITE_ERROR            (0x00200020) /* Error occured on SMP Write */
+#define PL_LOGINFO_CODE_ENCL_MGMT_SMP_READ_ERROR             (0x00200010) /* Error occurred on SMP Read */
+#define PL_LOGINFO_CODE_ENCL_MGMT_SMP_WRITE_ERROR            (0x00200020) /* Error occurred on SMP Write */
 #define PL_LOGINFO_CODE_ENCL_MGMT_NOT_SUPPORTED_ON_ENCL      (0x00200040) /* Encl Mgmt services not available for this WWID */
 #define PL_LOGINFO_CODE_ENCL_MGMT_ADDR_MODE_NOT_SUPPORTED    (0x00200050) /* Address Mode not suppored */
 #define PL_LOGINFO_CODE_ENCL_MGMT_BAD_SLOT_NUM               (0x00200060) /* Invalid Slot Number in SEP Msg */
@@ -207,8 +207,8 @@
 #define PL_LOGINFO_DA_SEP_RECEIVED_NACK_FROM_SLAVE           (0x00200103) /* SEP NACK'd, it is busy */
 #define PL_LOGINFO_DA_SEP_DID_NOT_RECEIVE_ACK                (0x00200104) /* SEP didn't rcv. ACK (Last Rcvd Bit = 1) */
 #define PL_LOGINFO_DA_SEP_BAD_STATUS_HDR_CHKSUM              (0x00200105) /* SEP stopped or sent bad chksum in Hdr */
-#define PL_LOGINFO_DA_SEP_STOP_ON_DATA                       (0x00200106) /* SEP stopped while transfering data */
-#define PL_LOGINFO_DA_SEP_STOP_ON_SENSE_DATA                 (0x00200107) /* SEP stopped while transfering sense data */
+#define PL_LOGINFO_DA_SEP_STOP_ON_DATA                       (0x00200106) /* SEP stopped while transferring data */
+#define PL_LOGINFO_DA_SEP_STOP_ON_SENSE_DATA                 (0x00200107) /* SEP stopped while transferring sense data */
 #define PL_LOGINFO_DA_SEP_UNSUPPORTED_SCSI_STATUS_1          (0x00200108) /* SEP returned unknown scsi status */
 #define PL_LOGINFO_DA_SEP_UNSUPPORTED_SCSI_STATUS_2          (0x00200109) /* SEP returned unknown scsi status */
 #define PL_LOGINFO_DA_SEP_CHKSUM_ERROR_AFTER_STOP            (0x0020010A) /* SEP returned bad chksum after STOP */
diff --git a/drivers/message/fusion/mptbase.c b/drivers/message/fusion/mptbase.c
index 3358c0af346..fa15e853d4e 100644
--- a/drivers/message/fusion/mptbase.c
+++ b/drivers/message/fusion/mptbase.c
@@ -3435,7 +3435,7 @@ SendPortEnable(MPT_ADAPTER *ioc, int portnum, int sleepFlag)
  *	If memory has already been allocated, the same (cached) value
  *	is returned.
  *
- *	Return 0 if successfull, or non-zero for failure
+ *	Return 0 if successful, or non-zero for failure
  **/
 int
 mpt_alloc_fw_memory(MPT_ADAPTER *ioc, int size)
@@ -6932,7 +6932,7 @@ EXPORT_SYMBOL(mpt_halt_firmware);
  *	Message Unit Reset - instructs the IOC to reset the Reply Post and
  *	Free FIFO's. All the Message Frames on Reply Free FIFO are discarded.
  *	All posted buffers are freed, and event notification is turned off.
- *	IOC doesnt reply to any outstanding request. This will transfer IOC
+ *	IOC doesn't reply to any outstanding request. This will transfer IOC
  *	to READY state.
  **/
 int
@@ -7418,7 +7418,12 @@ mpt_display_event_info(MPT_ADAPTER *ioc, EventNotificationReply_t *pEventReply)
 		case MPI_EVENT_SAS_PLS_LR_RATE_3_0:
 			snprintf(evStr, EVENT_DESCR_STR_SZ,
 			   "SAS PHY Link Status: Phy=%d:"
-			   " Rate 3.0 Gpbs",PhyNumber);
+			   " Rate 3.0 Gbps", PhyNumber);
+			break;
+		case MPI_EVENT_SAS_PLS_LR_RATE_6_0:
+			snprintf(evStr, EVENT_DESCR_STR_SZ,
+			   "SAS PHY Link Status: Phy=%d:"
+			   " Rate 6.0 Gbps", PhyNumber);
 			break;
 		default:
 			snprintf(evStr, EVENT_DESCR_STR_SZ,
@@ -7900,7 +7905,7 @@ mpt_spi_log_info(MPT_ADAPTER *ioc, u32 log_info)
 		    "Owner", 					/* 15h */
 		"Open Transmit DMA Abort",			/* 16h */
 		"IO Device Missing Delay Retry",		/* 17h */
-		"IO Cancelled Due to Recieve Error",		/* 18h */
+		"IO Cancelled Due to Receive Error",		/* 18h */
 		NULL,						/* 19h */
 		NULL,						/* 1Ah */
 		NULL,						/* 1Bh */
diff --git a/drivers/message/fusion/mptbase.h b/drivers/message/fusion/mptbase.h
index f71f2294847..1735c84ff75 100644
--- a/drivers/message/fusion/mptbase.h
+++ b/drivers/message/fusion/mptbase.h
@@ -76,8 +76,8 @@
 #define COPYRIGHT	"Copyright (c) 1999-2008 " MODULEAUTHOR
 #endif
 
-#define MPT_LINUX_VERSION_COMMON	"3.04.17"
-#define MPT_LINUX_PACKAGE_NAME		"@(#)mptlinux-3.04.17"
+#define MPT_LINUX_VERSION_COMMON	"3.04.18"
+#define MPT_LINUX_PACKAGE_NAME		"@(#)mptlinux-3.04.18"
 #define WHAT_MAGIC_STRING		"@" "(" "#" ")"
 
 #define show_mptmod_ver(s,ver)  \
diff --git a/drivers/message/fusion/mptctl.c b/drivers/message/fusion/mptctl.c
index a3856ed90ae..6e6e16aab9d 100644
--- a/drivers/message/fusion/mptctl.c
+++ b/drivers/message/fusion/mptctl.c
@@ -597,6 +597,13 @@ mptctl_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply)
 }
 
 static int
+mptctl_release(struct inode *inode, struct file *filep)
+{
+	fasync_helper(-1, filep, 0, &async_queue);
+	return 0;
+}
+
+static int
 mptctl_fasync(int fd, struct file *filep, int mode)
 {
 	MPT_ADAPTER	*ioc;
@@ -978,7 +985,7 @@ retry_wait:
 	ReplyMsg = (pFWDownloadReply_t)iocp->ioctl_cmds.reply;
 	iocstat = le16_to_cpu(ReplyMsg->IOCStatus) & MPI_IOCSTATUS_MASK;
 	if (iocstat == MPI_IOCSTATUS_SUCCESS) {
-		printk(MYIOC_s_INFO_FMT "F/W update successfull!\n", iocp->name);
+		printk(MYIOC_s_INFO_FMT "F/W update successful!\n", iocp->name);
 		return 0;
 	} else if (iocstat == MPI_IOCSTATUS_INVALID_FUNCTION) {
 		printk(MYIOC_s_WARN_FMT "Hmmm...  F/W download not supported!?!\n",
@@ -1307,8 +1314,10 @@ mptctl_getiocinfo (unsigned long arg, unsigned int data_size)
 	else
 		karg->adapterType = MPT_IOCTL_INTERFACE_SCSI;
 
-	if (karg->hdr.port > 1)
+	if (karg->hdr.port > 1) {
+		kfree(karg);
 		return -EINVAL;
+	}
 	port = karg->hdr.port;
 
 	karg->port = port;
@@ -2398,7 +2407,7 @@ done_free_mem:
 	}
 
 	/* mf is null if command issued successfully
-	 * otherwise, failure occured after mf acquired.
+	 * otherwise, failure occurred after mf acquired.
 	 */
 	if (mf)
 		mpt_free_msg_frame(ioc, mf);
@@ -2815,6 +2824,7 @@ static const struct file_operations mptctl_fops = {
 	.llseek =	no_llseek,
 	.fasync = 	mptctl_fasync,
 	.unlocked_ioctl = mptctl_ioctl,
+	.release =	mptctl_release,
 #ifdef CONFIG_COMPAT
 	.compat_ioctl = compat_mpctl_ioctl,
 #endif
diff --git a/drivers/message/fusion/mptsas.c b/drivers/message/fusion/mptsas.c
index 8aefb1829fc..66f94125de4 100644
--- a/drivers/message/fusion/mptsas.c
+++ b/drivers/message/fusion/mptsas.c
@@ -307,7 +307,7 @@ mptsas_requeue_fw_event(MPT_ADAPTER *ioc, struct fw_event_work *fw_event,
 	spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
 }
 
-/* free memory assoicated to a sas firmware event */
+/* free memory associated to a sas firmware event */
 static void
 mptsas_free_fw_event(MPT_ADAPTER *ioc, struct fw_event_work *fw_event)
 {
@@ -1094,7 +1094,7 @@ mptsas_block_io_starget(struct scsi_target *starget)
 /**
  * mptsas_target_reset_queue
  *
- * Receive request for TARGET_RESET after recieving an firmware
+ * Receive request for TARGET_RESET after receiving an firmware
  * event NOT_RESPONDING_EVENT, then put command in link list
  * and queue if task_queue already in use.
  *
@@ -1403,7 +1403,7 @@ mptsas_sas_enclosure_pg0(MPT_ADAPTER *ioc, struct mptsas_enclosure *enclosure,
 /**
  *	mptsas_add_end_device - report a new end device to sas transport layer
  *	@ioc: Pointer to MPT_ADAPTER structure
- *	@phy_info: decribes attached device
+ *	@phy_info: describes attached device
  *
  *	return (0) success (1) failure
  *
@@ -1481,7 +1481,7 @@ mptsas_add_end_device(MPT_ADAPTER *ioc, struct mptsas_phyinfo *phy_info)
 /**
  *	mptsas_del_end_device - report a deleted end device to sas transport layer
  *	@ioc: Pointer to MPT_ADAPTER structure
- *	@phy_info: decribes attached device
+ *	@phy_info: describes attached device
  *
  **/
 static void
@@ -1973,7 +1973,6 @@ static struct scsi_host_template mptsas_driver_template = {
 	.change_queue_depth 		= mptscsih_change_queue_depth,
 	.eh_abort_handler		= mptscsih_abort,
 	.eh_device_reset_handler	= mptscsih_dev_reset,
-	.eh_bus_reset_handler		= mptscsih_bus_reset,
 	.eh_host_reset_handler		= mptscsih_host_reset,
 	.bios_param			= mptscsih_bios_param,
 	.can_queue			= MPT_SAS_CAN_QUEUE,
@@ -3063,6 +3062,9 @@ static int mptsas_probe_one_phy(struct device *dev,
 	case MPI_SAS_IOUNIT0_RATE_3_0:
 		phy->negotiated_linkrate = SAS_LINK_RATE_3_0_GBPS;
 		break;
+	case MPI_SAS_IOUNIT0_RATE_6_0:
+		phy->negotiated_linkrate = SAS_LINK_RATE_6_0_GBPS;
+		break;
 	case MPI_SAS_IOUNIT0_RATE_SATA_OOB_COMPLETE:
 	case MPI_SAS_IOUNIT0_RATE_UNKNOWN:
 	default:
@@ -3691,7 +3693,8 @@ mptsas_send_link_status_event(struct fw_event_work *fw_event)
 	}
 
 	if (link_rate == MPI_SAS_IOUNIT0_RATE_1_5 ||
-	    link_rate == MPI_SAS_IOUNIT0_RATE_3_0) {
+	    link_rate == MPI_SAS_IOUNIT0_RATE_3_0 ||
+	    link_rate == MPI_SAS_IOUNIT0_RATE_6_0) {
 
 		if (!port_info) {
 			if (ioc->old_sas_discovery_protocal) {
diff --git a/drivers/message/fusion/mptscsih.c b/drivers/message/fusion/mptscsih.c
index 59b8f53d1ec..0d9b82a4454 100644
--- a/drivers/message/fusion/mptscsih.c
+++ b/drivers/message/fusion/mptscsih.c
@@ -1873,8 +1873,9 @@ mptscsih_abort(struct scsi_cmnd * SCpnt)
 	}
 
  out:
-	printk(MYIOC_s_INFO_FMT "task abort: %s (sc=%p)\n",
-	    ioc->name, ((retval == SUCCESS) ? "SUCCESS" : "FAILED"), SCpnt);
+	printk(MYIOC_s_INFO_FMT "task abort: %s (rv=%04x) (sc=%p) (sn=%ld)\n",
+	    ioc->name, ((retval == SUCCESS) ? "SUCCESS" : "FAILED"), retval,
+	    SCpnt, SCpnt->serial_number);
 
 	return retval;
 }
@@ -1911,7 +1912,7 @@ mptscsih_dev_reset(struct scsi_cmnd * SCpnt)
 
 	vdevice = SCpnt->device->hostdata;
 	if (!vdevice || !vdevice->vtarget) {
-		retval = SUCCESS;
+		retval = 0;
 		goto out;
 	}
 
diff --git a/drivers/message/i2o/README b/drivers/message/i2o/README
index 911fc3021e3..f072a8eb304 100644
--- a/drivers/message/i2o/README
+++ b/drivers/message/i2o/README
@@ -53,7 +53,7 @@ Symbios Logic (Now LSI)
 BoxHill Corporation
 	Loan of initial FibreChannel disk array used for development work.
 
-European Comission
+European Commission
 	Funding the work done by the University of Helsinki
 
 SysKonnect
diff --git a/drivers/message/i2o/device.c b/drivers/message/i2o/device.c
index 0ee4264f5db..4547db99f7d 100644
--- a/drivers/message/i2o/device.c
+++ b/drivers/message/i2o/device.c
@@ -65,7 +65,7 @@ int i2o_device_claim(struct i2o_device *dev)
 
 	rc = i2o_device_issue_claim(dev, I2O_CMD_UTIL_CLAIM, I2O_CLAIM_PRIMARY);
 	if (!rc)
-		pr_debug("i2o: claim of device %d succeded\n",
+		pr_debug("i2o: claim of device %d succeeded\n",
 			 dev->lct_data.tid);
 	else
 		pr_debug("i2o: claim of device %d failed %d\n",
@@ -110,7 +110,7 @@ int i2o_device_claim_release(struct i2o_device *dev)
 	}
 
 	if (!rc)
-		pr_debug("i2o: claim release of device %d succeded\n",
+		pr_debug("i2o: claim release of device %d succeeded\n",
 			 dev->lct_data.tid);
 	else
 		pr_debug("i2o: claim release of device %d failed %d\n",
@@ -248,7 +248,7 @@ static int i2o_device_add(struct i2o_controller *c, i2o_lct_entry *entry)
 			goto unreg_dev;
 	}
 
-	/* create user entries refering to this device */
+	/* create user entries referring to this device */
 	list_for_each_entry(tmp, &c->devices, list)
 	    if ((tmp->lct_data.user_tid == i2o_dev->lct_data.tid)
 		&& (tmp != i2o_dev)) {
@@ -267,7 +267,7 @@ static int i2o_device_add(struct i2o_controller *c, i2o_lct_entry *entry)
 			goto rmlink1;
 	}
 
-	/* create parent entries refering to this device */
+	/* create parent entries referring to this device */
 	list_for_each_entry(tmp, &c->devices, list)
 	    if ((tmp->lct_data.parent_tid == i2o_dev->lct_data.tid)
 		&& (tmp != i2o_dev)) {
diff --git a/drivers/message/i2o/driver.c b/drivers/message/i2o/driver.c
index a0421efe04c..8a5b2d8f4da 100644
--- a/drivers/message/i2o/driver.c
+++ b/drivers/message/i2o/driver.c
@@ -84,7 +84,8 @@ int i2o_driver_register(struct i2o_driver *drv)
 	osm_debug("Register driver %s\n", drv->name);
 
 	if (drv->event) {
-		drv->event_queue = create_workqueue(drv->name);
+		drv->event_queue = alloc_workqueue(drv->name,
+						   WQ_MEM_RECLAIM, 1);
 		if (!drv->event_queue) {
 			osm_err("Could not initialize event queue for driver "
 				"%s\n", drv->name);
diff --git a/drivers/message/i2o/i2o_block.c b/drivers/message/i2o/i2o_block.c
index ae7cad18589..643ad52e3ca 100644
--- a/drivers/message/i2o/i2o_block.c
+++ b/drivers/message/i2o/i2o_block.c
@@ -610,7 +610,7 @@ static int i2o_block_release(struct gendisk *disk, fmode_t mode)
 
 	/*
 	 * This is to deail with the case of an application
-	 * opening a device and then the device dissapears while
+	 * opening a device and then the device disappears while
 	 * it's in use, and then the application tries to release
 	 * it.  ex: Unmounting a deleted RAID volume at reboot.
 	 * If we send messages, it will just cause FAILs since
@@ -695,27 +695,29 @@ static int i2o_block_ioctl(struct block_device *bdev, fmode_t mode,
 };
 
 /**
- *	i2o_block_media_changed - Have we seen a media change?
+ *	i2o_block_check_events - Have we seen a media change?
  *	@disk: gendisk which should be verified
+ *	@clearing: events being cleared
  *
  *	Verifies if the media has changed.
  *
  *	Returns 1 if the media was changed or 0 otherwise.
  */
-static int i2o_block_media_changed(struct gendisk *disk)
+static unsigned int i2o_block_check_events(struct gendisk *disk,
+					   unsigned int clearing)
 {
 	struct i2o_block_device *p = disk->private_data;
 
 	if (p->media_change_flag) {
 		p->media_change_flag = 0;
-		return 1;
+		return DISK_EVENT_MEDIA_CHANGE;
 	}
 	return 0;
 }
 
 /**
  *	i2o_block_transfer - Transfer a request to/from the I2O controller
- *	@req: the request which should be transfered
+ *	@req: the request which should be transferred
  *
  *	This function converts the request into a I2O message. The necessary
  *	DMA buffers are allocated and after everything is setup post the message
@@ -895,11 +897,7 @@ static void i2o_block_request_fn(struct request_queue *q)
 {
 	struct request *req;
 
-	while (!blk_queue_plugged(q)) {
-		req = blk_peek_request(q);
-		if (!req)
-			break;
-
+	while ((req = blk_peek_request(q)) != NULL) {
 		if (req->cmd_type == REQ_TYPE_FS) {
 			struct i2o_block_delayed_request *dreq;
 			struct i2o_block_request *ireq = req->special;
@@ -950,7 +948,7 @@ static const struct block_device_operations i2o_block_fops = {
 	.ioctl = i2o_block_ioctl,
 	.compat_ioctl = i2o_block_ioctl,
 	.getgeo = i2o_block_getgeo,
-	.media_changed = i2o_block_media_changed
+	.check_events = i2o_block_check_events,
 };
 
 /**
@@ -1002,6 +1000,7 @@ static struct i2o_block_device *i2o_block_device_alloc(void)
 	gd->major = I2O_MAJOR;
 	gd->queue = queue;
 	gd->fops = &i2o_block_fops;
+	gd->events = DISK_EVENT_MEDIA_CHANGE;
 	gd->private_data = dev;
 
 	dev->gd = gd;
diff --git a/drivers/message/i2o/i2o_block.h b/drivers/message/i2o/i2o_block.h
index 67f921b4419..cf8873cbca3 100644
--- a/drivers/message/i2o/i2o_block.h
+++ b/drivers/message/i2o/i2o_block.h
@@ -73,7 +73,7 @@ struct i2o_block_device {
 	struct i2o_device *i2o_dev;	/* pointer to I2O device */
 	struct gendisk *gd;
 	spinlock_t lock;	/* queue lock */
-	struct list_head open_queue;	/* list of transfered, but unfinished
+	struct list_head open_queue;	/* list of transferred, but unfinished
 					   requests */
 	unsigned int open_queue_depth;	/* number of requests in the queue */
 
diff --git a/drivers/message/i2o/i2o_config.c b/drivers/message/i2o/i2o_config.c
index 7d3cc575c36..098de2b3578 100644
--- a/drivers/message/i2o/i2o_config.c
+++ b/drivers/message/i2o/i2o_config.c
@@ -1044,8 +1044,7 @@ static long i2o_cfg_ioctl(struct file *fp, unsigned int cmd, unsigned long arg)
 
 static int cfg_open(struct inode *inode, struct file *file)
 {
-	struct i2o_cfg_info *tmp =
-	    (struct i2o_cfg_info *)kmalloc(sizeof(struct i2o_cfg_info),
+	struct i2o_cfg_info *tmp = kmalloc(sizeof(struct i2o_cfg_info),
 					   GFP_KERNEL);
 	unsigned long flags;
 
diff --git a/drivers/message/i2o/i2o_scsi.c b/drivers/message/i2o/i2o_scsi.c
index 97bdf82ec90..f003957e8e1 100644
--- a/drivers/message/i2o/i2o_scsi.c
+++ b/drivers/message/i2o/i2o_scsi.c
@@ -204,7 +204,7 @@ static int i2o_scsi_remove(struct device *dev)
  *	i2o_scsi_probe - verify if dev is a I2O SCSI device and install it
  *	@dev: device to verify if it is a I2O SCSI device
  *
- *	Retrieve channel, id and lun for I2O device. If everthing goes well
+ *	Retrieve channel, id and lun for I2O device. If everything goes well
  *	register the I2O device as SCSI device on the I2O SCSI controller.
  *
  *	Returns 0 on success or negative error code on failure.