Merge commit 'v2.6.34-rc1' into for-2.6.35-incoming

1 files changed, 67 insertions, 17 deletions

diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 87829789243..951fa9b93fb 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -9,6 +9,16 @@ config MFD_CORE
 	tristate
 	default n
 
+config MFD_88PM860X
+	bool "Support Marvell 88PM8606/88PM8607"
+	depends on I2C=y
+	select MFD_CORE
+	help
+	  This supports for Marvell 88PM8606/88PM8607 Power Management IC.
+	  This includes the I2C driver and the core APIs _only_, you have to
+	  select individual components like voltage regulators, RTC and
+	  battery-charger under the corresponding menus.
+
 config MFD_SM501
 	tristate "Support for Silicon Motion SM501"
 	 ---help---
@@ -37,7 +47,7 @@ config MFD_ASIC3
 
 config MFD_SH_MOBILE_SDHI
 	bool "Support for SuperH Mobile SDHI"
-	depends on SUPERH
+	depends on SUPERH || ARCH_SHMOBILE
 	select MFD_CORE
 	 ---help---
 	  This driver supports the SDHI hardware block found in many
@@ -68,6 +78,15 @@ config HTC_PASIC3
 	  HTC Magician devices, respectively. Actual functionality is
 	  handled by the leds-pasic3 and ds1wm drivers.
 
+config HTC_I2CPLD
+	bool "HTC I2C PLD chip support"
+	depends on I2C=y && GPIOLIB
+	help
+	  If you say yes here you get support for the supposed CPLD
+	  found on omap850 HTC devices like the HTC Wizard and HTC Herald.
+	  This device provides input and output GPIOs through an I2C
+	  interface to one or more sub-chips.
+
 config UCB1400_CORE
 	tristate "Philips UCB1400 Core driver"
 	depends on AC97_BUS
@@ -94,7 +113,7 @@ config TPS65010
 
 config MENELAUS
 	bool "Texas Instruments TWL92330/Menelaus PM chip"
-	depends on I2C=y && ARCH_OMAP24XX
+	depends on I2C=y && ARCH_OMAP2
 	help
 	  If you say yes here you get support for the Texas Instruments
 	  TWL92330/Menelaus Power Management chip. This include voltage
@@ -184,6 +203,16 @@ config PMIC_ADP5520
 	  individual components like LCD backlight, LEDs, GPIOs and Kepad
 	  under the corresponding menus.
 
+config MFD_MAX8925
+	bool "Maxim Semiconductor MAX8925 PMIC Support"
+	depends on I2C=y
+	select MFD_CORE
+	help
+	  Say yes here to support for Maxim Semiconductor MAX8925. This is
+	  a Power Management IC. This driver provies common support for
+	  accessing the device, additional drivers must be enabled in order
+	  to use the functionality of the device.
+
 config MFD_WM8400
 	tristate "Support Wolfson Microelectronics WM8400"
 	select MFD_CORE
@@ -205,7 +234,7 @@ config MFD_WM831X
 	  functionality of the device.
 
 config MFD_WM8350
-	tristate
+	bool
 
 config MFD_WM8350_CONFIG_MODE_0
 	bool
@@ -256,9 +285,9 @@ config MFD_WM8352_CONFIG_MODE_3
 	depends on MFD_WM8350
 
 config MFD_WM8350_I2C
-	tristate "Support Wolfson Microelectronics WM8350 with I2C"
+	bool "Support Wolfson Microelectronics WM8350 with I2C"
 	select MFD_WM8350
-	depends on I2C
+	depends on I2C=y
 	help
 	  The WM8350 is an integrated audio and power management
 	  subsystem with watchdog and RTC functionality for embedded
@@ -266,6 +295,18 @@ config MFD_WM8350_I2C
 	  I2C as the control interface.  Additional options must be
 	  selected to enable support for the functionality of the chip.
 
+config MFD_WM8994
+	tristate "Support Wolfson Microelectronics WM8994"
+	select MFD_CORE
+	depends on I2C
+	help
+	  The WM8994 is a highly integrated hi-fi CODEC designed for
+	  smartphone applicatiosn.  As well as audio functionality it
+	  has on board GPIO and regulator functionality which is
+	  supported via the relevant subsystems.  This driver provides
+	  core support for the WM8994, in order to use the actual
+	  functionaltiy of the device other drivers must be enabled.
+
 config MFD_PCF50633
 	tristate "Support for NXP PCF50633"
 	depends on I2C
@@ -300,8 +341,8 @@ config PCF50633_GPIO
 	 the PCF50633 chip.
 
 config AB3100_CORE
-	tristate "ST-Ericsson AB3100 Mixed Signal Circuit core functions"
-	depends on I2C
+	bool "ST-Ericsson AB3100 Mixed Signal Circuit core functions"
+	depends on I2C=y
 	default y if ARCH_U300
 	help
 	  Select this to enable the AB3100 Mixed Signal IC core
@@ -329,16 +370,6 @@ config EZX_PCAP
 	  This enables the PCAP ASIC present on EZX Phones. This is
 	  needed for MMC, TouchScreen, Sound, USB, etc..
 
-config MFD_88PM8607
-	bool "Support Marvell 88PM8607"
-	depends on I2C=y
-	select MFD_CORE
-	help
-	  This supports for Marvell 88PM8607 Power Management IC. This includes
-	  the I2C driver and the core APIs _only_, you have to select
-	  individual components like voltage regulators, RTC and
-	  battery-charger under the corresponding menus.
-
 config AB4500_CORE
 	tristate "ST-Ericsson's AB4500 Mixed Signal Power management chip"
 	depends on SPI
@@ -348,6 +379,25 @@ config AB4500_CORE
 	  read/write functions for the devices to get access to this chip.
 	  This chip embeds various other multimedia funtionalities as well.
 
+config MFD_TIMBERDALE
+	tristate "Support for the Timberdale FPGA"
+	select MFD_CORE
+	depends on PCI && GPIOLIB
+	---help---
+	This is the core driver for the timberdale FPGA. This device is a
+	multifunction device which exposes numerous platform devices.
+
+	The timberdale FPGA can be found on the Intel Atom development board
+	for in-vehicle infontainment, called Russellville.
+
+config LPC_SCH
+	tristate "Intel SCH LPC"
+	depends on PCI
+	select MFD_CORE
+	help
+	  LPC bridge function of the Intel SCH provides support for
+	  System Management Bus and General Purpose I/O.
+
 endmenu
 
 menu "Multimedia Capabilities Port drivers"