Merge tag 'mfd-3.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6

Pull MFD changes from Samuel Ortiz:
 "Besides the usual cleanups, this one brings:

   * Support for 5 new chipsets: Intel's ICH LPC and SCH Centerton,
     ST-E's STAX211, Samsung's MAX77693 and TI's LM3533.

   * Device tree support for the twl6040, tps65910, da9502 and ab8500
     drivers.

   * Fairly big tps56910, ab8500 and db8500 updates.

   * i2c support for mc13xxx.

   * Our regular update for the wm8xxx driver from Mark."

Fix up various conflicts with other trees, largely due to ab5500 removal
etc.

* tag 'mfd-3.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (106 commits)
  mfd: Fix build break of max77693 by adding REGMAP_I2C option
  mfd: Fix twl6040 build failure
  mfd: Fix max77693 build failure
  mfd: ab8500-core should depend on MFD_DB8500_PRCMU
  gpio: tps65910: dt: process gpio specific device node info
  mfd: Remove the parsing of dt info for tps65910 gpio
  mfd: Save device node parsed platform data for tps65910 sub devices
  mfd: Add r_select to lm3533 platform data
  gpio: Add Intel Centerton support to gpio-sch
  mfd: Emulate active low IRQs as well as active high IRQs for wm831x
  mfd: Mark two lm3533 zone registers as volatile
  mfd: Fix return type of lm533 attribute is_visible
  mfd: Enable Device Tree support in the ab8500-pwm driver
  mfd: Enable Device Tree support in the ab8500-sysctrl driver
  mfd: Add support for Device Tree to twl6040
  mfd: Register the twl6040 child for the ASoC codec unconditionally
  mfd: Allocate twl6040 IRQ numbers dynamically
  mfd: twl6040 code cleanup in interrupt initialization part
  mfd: Enable ab8500-gpadc driver for Device Tree
  mfd: Prevent unassigned pointer from being used in ab8500-gpadc driver
  ...

1 files changed, 67 insertions, 9 deletions

diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index f4b4dad7739..e129c820df7 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -106,6 +106,19 @@ config UCB1400_CORE
 	  To compile this driver as a module, choose M here: the
 	  module will be called ucb1400_core.
 
+config MFD_LM3533
+	tristate "LM3533 Lighting Power chip"
+	depends on I2C
+	select MFD_CORE
+	select REGMAP_I2C
+	help
+	  Say yes here to enable support for National Semiconductor / TI
+	  LM3533 Lighting Power chips.
+
+	  This driver provides common support for accessing the device;
+	  additional drivers must be enabled in order to use the LED,
+	  backlight or ambient-light-sensor functionality of the device.
+
 config TPS6105X
 	tristate "TPS61050/61052 Boost Converters"
 	depends on I2C
@@ -177,8 +190,8 @@ config MFD_TPS65910
 	bool "TPS65910 Power Management chip"
 	depends on I2C=y && GPIOLIB
 	select MFD_CORE
-	select GPIO_TPS65910
 	select REGMAP_I2C
+	select IRQ_DOMAIN
 	help
 	  if you say yes here you get support for the TPS65910 series of
 	  Power Management chips.
@@ -409,6 +422,19 @@ config PMIC_ADP5520
 	  individual components like LCD backlight, LEDs, GPIOs and Kepad
 	  under the corresponding menus.
 
+config MFD_MAX77693
+	bool "Maxim Semiconductor MAX77693 PMIC Support"
+	depends on I2C=y && GENERIC_HARDIRQS
+	select MFD_CORE
+	select REGMAP_I2C
+	help
+	  Say yes here to support for Maxim Semiconductor MAX77693.
+	  This is a companion Power Management IC with Flash, Haptic, Charger,
+	  and MUIC(Micro USB Interface Controller) controls on chip.
+	  This driver provides common support for accessing the device;
+	  additional drivers must be enabled in order to use the functionality
+	  of the device.
+
 config MFD_MAX8925
 	bool "Maxim Semiconductor MAX8925 PMIC Support"
 	depends on I2C=y && GENERIC_HARDIRQS
@@ -454,9 +480,9 @@ config MFD_S5M_CORE
 	 of the device
 
 config MFD_WM8400
-	tristate "Support Wolfson Microelectronics WM8400"
+	bool "Support Wolfson Microelectronics WM8400"
 	select MFD_CORE
-	depends on I2C
+	depends on I2C=y
 	select REGMAP_I2C
 	help
 	  Support for the Wolfson Microelecronics WM8400 PMIC and audio
@@ -473,6 +499,7 @@ config MFD_WM831X_I2C
 	select MFD_CORE
 	select MFD_WM831X
 	select REGMAP_I2C
+	select IRQ_DOMAIN
 	depends on I2C=y && GENERIC_HARDIRQS
 	help
 	  Support for the Wolfson Microelecronics WM831x and WM832x PMICs
@@ -485,6 +512,7 @@ config MFD_WM831X_SPI
 	select MFD_CORE
 	select MFD_WM831X
 	select REGMAP_SPI
+	select IRQ_DOMAIN
 	depends on SPI_MASTER && GENERIC_HARDIRQS
 	help
 	  Support for the Wolfson Microelecronics WM831x and WM832x PMICs
@@ -597,17 +625,32 @@ config MFD_MC13783
 	tristate
 
 config MFD_MC13XXX
-	tristate "Support Freescale MC13783 and MC13892"
-	depends on SPI_MASTER
+	tristate
+	depends on SPI_MASTER || I2C
 	select MFD_CORE
 	select MFD_MC13783
 	help
-	  Support for the Freescale (Atlas) PMIC and audio CODECs
-	  MC13783 and MC13892.
-	  This driver provides common support for accessing  the device,
+	  Enable support for the Freescale MC13783 and MC13892 PMICs.
+	  This driver provides common support for accessing the device,
 	  additional drivers must be enabled in order to use the
 	  functionality of the device.
 
+config MFD_MC13XXX_SPI
+	tristate "Freescale MC13783 and MC13892 SPI interface"
+	depends on SPI_MASTER
+	select REGMAP_SPI
+	select MFD_MC13XXX
+	help
+	  Select this if your MC13xxx is connected via an SPI bus.
+
+config MFD_MC13XXX_I2C
+	tristate "Freescale MC13892 I2C interface"
+	depends on I2C
+	select REGMAP_I2C
+	select MFD_MC13XXX
+	help
+	  Select this if your MC13xxx is connected via an I2C bus.
+
 config ABX500_CORE
 	bool "ST-Ericsson ABX500 Mixed Signal Circuit register functions"
 	default y if ARCH_U300 || ARCH_U8500
@@ -651,7 +694,7 @@ config EZX_PCAP
 
 config AB8500_CORE
 	bool "ST-Ericsson AB8500 Mixed Signal Power Management chip"
-	depends on GENERIC_HARDIRQS && ABX500_CORE
+	depends on GENERIC_HARDIRQS && ABX500_CORE && MFD_DB8500_PRCMU
 	select MFD_CORE
 	help
 	  Select this option to enable access to AB8500 power management
@@ -722,6 +765,16 @@ config LPC_SCH
 	  LPC bridge function of the Intel SCH provides support for
 	  System Management Bus and General Purpose I/O.
 
+config LPC_ICH
+	tristate "Intel ICH LPC"
+	depends on PCI
+	select MFD_CORE
+	help
+	  The LPC bridge function of the Intel ICH provides support for
+	  many functional units. This driver provides needed support for
+	  other drivers to control these functions, currently GPIO and
+	  watchdog.
+
 config MFD_RDC321X
 	tristate "Support for RDC-R321x southbridge"
 	select MFD_CORE
@@ -854,6 +907,11 @@ config MFD_RC5T583
 	  Additional drivers must be enabled in order to use the
 	  different functionality of the device.
 
+config MFD_STA2X11
+	bool "STA2X11 multi function device support"
+	depends on STA2X11
+	select MFD_CORE
+
 config MFD_ANATOP
 	bool "Support for Freescale i.MX on-chip ANATOP controller"
 	depends on SOC_IMX6Q