Merge tag 'mfd-3.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-next

Pull MFD update from Samuel Ortiz:
 "For 3.10 we have a few new MFD drivers for:

   - The ChromeOS embedded controller which provides keyboard, battery
     and power management services.  This controller is accessible
     through i2c or SPI.

   - Silicon Laboratories 476x controller, providing access to their FM
     chipset and their audio codec.

   - Realtek's RTS5249, a memory stick, MMC and SD/SDIO PCI based
     reader.

   - Nokia's Tahvo power button and watchdog device.  This device is
     very similar to Retu and is thus supported by the same code base.

   - STMicroelectronics STMPE1801, a keyboard and GPIO controller
     supported by the stmpe driver.

   - ST-Ericsson AB8540 and AB8505 power management and voltage
     converter controllers through the existing ab8500 code.

  Some other drivers got cleaned up or improved.  In particular:

   - The Linaro/STE guys got the ab8500 driver in sync with their
     internal code through a series of optimizations, fixes and
     improvements.

   - The AS3711 and OMAP USB drivers now have DT support.

   - The arizona clock and interrupt handling code got improved.

   - The wm5102 register patch and boot mechanism also got improved."

* tag 'mfd-3.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-next: (104 commits)
  mfd: si476x: Don't use 0bNNN
  mfd: vexpress: Handle pending config transactions
  mfd: ab8500: Export ab8500_gpadc_sw_hw_convert properly
  mfd: si476x: Fix i2c warning
  mfd: si476x: Add header files and Kbuild plumbing
  mfd: si476x: Add chip properties handling code
  mfd: si476x: Add the bulk of the core driver
  mfd: si476x: Add commands abstraction layer
  mfd: rtsx: Support RTS5249
  mfd: retu: Add Tahvo support
  mfd: ucb1400: Pass ucb1400-gpio data through ac97 bus
  mfd: wm8994: Add some OF properties
  mfd: wm8994: Add device ID data to WM8994 OF device IDs
  input: Export matrix_keypad_parse_of_params()
  mfd: tps65090: Add compatible string for charger subnode
  mfd: db8500-prcmu: Support platform dependant device selection
  mfd: syscon: Fix warnings when printing resource_size_t
  of: Add stub of_get_parent for non-OF builds
  mfd: omap-usb-tll: Convert to devm_ioremap_resource()
  mfd: omap-usb-host: Convert to devm_ioremap_resource()
  ...

1 files changed, 9 insertions, 12 deletions

diff --git a/drivers/mfd/ezx-pcap.c b/drivers/mfd/ezx-pcap.c
index b7a61f0f27a..5502106ad51 100644
--- a/drivers/mfd/ezx-pcap.c
+++ b/drivers/mfd/ezx-pcap.c
@@ -393,7 +393,7 @@ static int pcap_add_subdev(struct pcap_chip *pcap,
 
 static int ezx_pcap_remove(struct spi_device *spi)
 {
-	struct pcap_chip *pcap = dev_get_drvdata(&spi->dev);
+	struct pcap_chip *pcap = spi_get_drvdata(spi);
 	struct pcap_platform_data *pdata = spi->dev.platform_data;
 	int i, adc_irq;
 
@@ -403,7 +403,7 @@ static int ezx_pcap_remove(struct spi_device *spi)
 	/* cleanup ADC */
 	adc_irq = pcap_to_irq(pcap, (pdata->config & PCAP_SECOND_PORT) ?
 				PCAP_IRQ_ADCDONE2 : PCAP_IRQ_ADCDONE);
-	free_irq(adc_irq, pcap);
+	devm_free_irq(&spi->dev, adc_irq, pcap);
 	mutex_lock(&pcap->adc_mutex);
 	for (i = 0; i < PCAP_ADC_MAXQ; i++)
 		kfree(pcap->adc_queue[i]);
@@ -415,8 +415,6 @@ static int ezx_pcap_remove(struct spi_device *spi)
 
 	destroy_workqueue(pcap->workqueue);
 
-	kfree(pcap);
-
 	return 0;
 }
 
@@ -431,7 +429,7 @@ static int ezx_pcap_probe(struct spi_device *spi)
 	if (!pdata)
 		goto ret;
 
-	pcap = kzalloc(sizeof(*pcap), GFP_KERNEL);
+	pcap = devm_kzalloc(&spi->dev, sizeof(*pcap), GFP_KERNEL);
 	if (!pcap) {
 		ret = -ENOMEM;
 		goto ret;
@@ -441,14 +439,14 @@ static int ezx_pcap_probe(struct spi_device *spi)
 	mutex_init(&pcap->adc_mutex);
 	INIT_WORK(&pcap->isr_work, pcap_isr_work);
 	INIT_WORK(&pcap->msr_work, pcap_msr_work);
-	dev_set_drvdata(&spi->dev, pcap);
+	spi_set_drvdata(spi, pcap);
 
 	/* setup spi */
 	spi->bits_per_word = 32;
 	spi->mode = SPI_MODE_0 | (pdata->config & PCAP_CS_AH ? SPI_CS_HIGH : 0);
 	ret = spi_setup(spi);
 	if (ret)
-		goto free_pcap;
+		goto ret;
 
 	pcap->spi = spi;
 
@@ -458,7 +456,7 @@ static int ezx_pcap_probe(struct spi_device *spi)
 	if (!pcap->workqueue) {
 		ret = -ENOMEM;
 		dev_err(&spi->dev, "can't create pcap thread\n");
-		goto free_pcap;
+		goto ret;
 	}
 
 	/* redirect interrupts to AP, except adcdone2 */
@@ -491,7 +489,8 @@ static int ezx_pcap_probe(struct spi_device *spi)
 	adc_irq = pcap_to_irq(pcap, (pdata->config & PCAP_SECOND_PORT) ?
 					PCAP_IRQ_ADCDONE2 : PCAP_IRQ_ADCDONE);
 
-	ret = request_irq(adc_irq, pcap_adc_irq, 0, "ADC", pcap);
+	ret = devm_request_irq(&spi->dev, adc_irq, pcap_adc_irq, 0, "ADC",
+				pcap);
 	if (ret)
 		goto free_irqchip;
 
@@ -511,14 +510,12 @@ static int ezx_pcap_probe(struct spi_device *spi)
 remove_subdevs:
 	device_for_each_child(&spi->dev, NULL, pcap_remove_subdev);
 /* free_adc: */
-	free_irq(adc_irq, pcap);
+	devm_free_irq(&spi->dev, adc_irq, pcap);
 free_irqchip:
 	for (i = pcap->irq_base; i < (pcap->irq_base + PCAP_NIRQS); i++)
 		irq_set_chip_and_handler(i, NULL, NULL);
 /* destroy_workqueue: */
 	destroy_workqueue(pcap->workqueue);
-free_pcap:
-	kfree(pcap);
 ret:
 	return ret;
 }