diff options
| author | Olof Johansson <olof@lixom.net> | 2013-02-05 14:06:09 -0800 |
|---|---|---|
| committer | Olof Johansson <olof@lixom.net> | 2013-02-05 14:06:25 -0800 |
| commit | 61cfd8736040dd2d620278fb11c6c4acfeb041c9 (patch) | |
| tree | a3191d768acd36a5aff52eabe0892860dfd96730 /drivers/mfd/rtl8411.c | |
| parent | 7960ba89ca518ec99d2a937907f445a26b2a1628 (diff) | |
| parent | 7dc0f27ea43151889ae762d321e4068dd90cd9e2 (diff) | |
Merge tag 'omap-for-v3.9/board-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/boards
From Tony Lindgren:
Minimal updates to OMAP board-*.c files while converting
things to device tree based booting.
* tag 'omap-for-v3.9/board-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP2+: omap2plus_defconfig: enable omap1 rtc
RX-51: Register twl4030-madc device
RX-51: Add leds lp5523 names from Maemo 5 2.6.28 kernel
ARM: OMAP2+: AM33XX: omap2plus_defconfig: Add support for few drivers
ARM: OMAP1: nokia770: enable CBUS/Retu
ARM: OMAP2+: omap2plus_defconfig: enable CMA allocator
ARM: OMAP2+: omap2plus_defconfig: enable TFP410 chip support
ARM: OMAP3: igep0020: simplify GPIO LEDs dependencies
ARM: OMAP2+: craneboard: support the TPS65910 PMU
ARM: OMAP2+: craneboard: support NAND device
ARM: OMAP3: cm-t3517: add MMC support
ARM: OMAP2+: Remove apollon board support
+ Linux 3.8-rc6
Signed-off-by: Olof Johansson <olof@lixom.net>
Diffstat (limited to 'drivers/mfd/rtl8411.c')
| -rw-r--r-- | drivers/mfd/rtl8411.c | 29 |
1 files changed, 29 insertions, 0 deletions
diff --git a/drivers/mfd/rtl8411.c b/drivers/mfd/rtl8411.c index 89f046ca9e4..3d3b4addf81 100644 --- a/drivers/mfd/rtl8411.c +++ b/drivers/mfd/rtl8411.c @@ -112,6 +112,21 @@ static int rtl8411_card_power_off(struct rtsx_pcr *pcr, int card) BPP_LDO_POWB, BPP_LDO_SUSPEND); } +static int rtl8411_switch_output_voltage(struct rtsx_pcr *pcr, u8 voltage) +{ + u8 mask, val; + + mask = (BPP_REG_TUNED18 << BPP_TUNED18_SHIFT_8411) | BPP_PAD_MASK; + if (voltage == OUTPUT_3V3) + val = (BPP_ASIC_3V3 << BPP_TUNED18_SHIFT_8411) | BPP_PAD_3V3; + else if (voltage == OUTPUT_1V8) + val = (BPP_ASIC_1V8 << BPP_TUNED18_SHIFT_8411) | BPP_PAD_1V8; + else + return -EINVAL; + + return rtsx_pci_write_register(pcr, LDO_CTL, mask, val); +} + static unsigned int rtl8411_cd_deglitch(struct rtsx_pcr *pcr) { unsigned int card_exist; @@ -163,6 +178,18 @@ static unsigned int rtl8411_cd_deglitch(struct rtsx_pcr *pcr) return card_exist; } +static int rtl8411_conv_clk_and_div_n(int input, int dir) +{ + int output; + + if (dir == CLK_TO_DIV_N) + output = input * 4 / 5 - 2; + else + output = (input + 2) * 5 / 4; + + return output; +} + static const struct pcr_ops rtl8411_pcr_ops = { .extra_init_hw = rtl8411_extra_init_hw, .optimize_phy = NULL, @@ -172,7 +199,9 @@ static const struct pcr_ops rtl8411_pcr_ops = { .disable_auto_blink = rtl8411_disable_auto_blink, .card_power_on = rtl8411_card_power_on, .card_power_off = rtl8411_card_power_off, + .switch_output_voltage = rtl8411_switch_output_voltage, .cd_deglitch = rtl8411_cd_deglitch, + .conv_clk_and_div_n = rtl8411_conv_clk_and_div_n, }; /* SD Pull Control Enable: |