Merge tag 'sound-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound updates from Takashi Iwai:
 "It was holiday season, so no wonder that there are little changes in
  framework level, although diffstat shows quite many changes spreaded
  over sound/* directories.  Most of changes are cleanups, code
  refactoring and fixes.

  Some highlights:
   - Removal of OSS sleep_on usages by Arnd
   - Simplified memalloc helper codes, drop obsoleted features; now it's
     built into PCM driver instead of an individual module
   - Warn if PCM buffer preallocation fails, which will show page
     allocation issues more clearly
   - Compress offload API updates for sample rates by Vinod
   - PCM glitch workaround on ctxfi emu20k1 by Sarah
   - Drop cs46xx DSP blobs, using firmware loader now
   - USB-audio quitks for Plantronics Gamecom 780, Creative VF0420, and
     Focusrite Saffire 6

  HD-audio specifics:
   - Standardize Kconfigs of HD-audio codec drivers; now "make
     localmodconfig" recognizes configs properly (finally!)
   - Parallel PM implementation by Mengdong
   - BayleyBay/ValleyView2 board fixups
   - Broadwell audio support
   - Runtime PM improvement (PantherPoint, etc)
   - Quirks: Dell subwooer, Gigabyte mobo jack detection oddity, Dell
     AiO click noise fixes, Dell headset mic fixes, etc
   - Automatic bind with HDMI codec parser without generic parser
   - More AD codec fixes (since 3.12 regression) including the automatic
     stereo mix support
   - Common Thinkpad ACPI helper for Realtek and Conexant codecs

  ASoC specifics:
   - Update to the generic DMA code to support deferred probe and
     managed resources
   - New drivers for BCM2835 (used in Raspberry Pi), Tegra with MAX98090
     and Analog Devices AXI I2S and S/PDIF controller IPs
   - Device tree support for the simple card, max98090 and cs42l52
   - Conversion of the Samsung drivers to native dmaengine, making them
     multiplatform compatible and hopefully helping keep them more
     modern and up to date.
   - More regmap conversions, including a very welcome one for twl6040
     from Peter Ujfalusi
   - A big overhaul of the DaVinci drivers also from Peter Ujfalusi
   - Lots of DMA updates from Lars-Peter
   - Improvements to the constraints handling code from Lars-Peter
   - A very helpful conversion of the TWL4030 driver to regmap from Peter
   - A new driver for the Freescale ESAI controller from Nicolin Chen
   - Conversion of some of the drivers to use params_width()
   - Extensions to DPCM for use with compressed audio from Liam"

* tag 'sound-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (396 commits)
  ASoC: dapm: Fix double prefix addition
  ASoC: compress: Add suport for DPCM into compressed audio
  ASoC: DPCM: make some DPCM API calls non static for compressed usage
  ASoC: core: Fix possible NULL pointer dereference of pcm->config
  ALSA: hda - add headset mic detect quirks for some Dell machines
  ASoC: tlv320aic32x4: Fix regmap range_min
  ASoC: core: Return -ENOTSUPP from set_sysclk() if no operation provided
  ASoC: dapm: Change prototype of soc_widget_read
  ASoC: samsung: Remove SND_DMAENGINE_PCM_FLAG_NO_RESIDUE flag
  ASoC: axi-{spdif,i2s}: Remove SND_DMAENGINE_PCM_FLAG_NO_RESIDUE flag
  ASoC: generic-dmaengine-pcm: Check DMA residue granularity
  ASoC: generic-dmaengine-pcm: Check NO_RESIDUE flag at runtime
  dma: pl330: Set residue_granularity
  dma: Indicate residue granularity in dma_slave_caps
  ASoC: simple-card: fix one bug to writing to the platform data
  ASoC: pcm: Use snd_pcm_rate_mask_intersect() helper
  ALSA: Add helper function for intersecting two rate masks
  ASoC: s6000: Don't mix SNDRV_PCM_RATE_CONTINUOUS with specific rates
  ASoC: fsl: Don't mix SNDRV_PCM_RATE_CONTINUOUS with specific rates
  ASoC: pcm: Properly initialize hw->rate_max
  ...

1 files changed, 163 insertions, 27 deletions

diff --git a/drivers/mfd/twl-core.c b/drivers/mfd/twl-core.c
index 29473c2c95a..6ef7685a4cf 100644
--- a/drivers/mfd/twl-core.c
+++ b/drivers/mfd/twl-core.c
@@ -47,6 +47,9 @@
 #include <linux/i2c.h>
 #include <linux/i2c/twl.h>
 
+/* Register descriptions for audio */
+#include <linux/mfd/twl4030-audio.h>
+
 #include "twl-core.h"
 
 /*
@@ -200,6 +203,105 @@ static struct twl_mapping twl4030_map[] = {
 	{ 2, TWL5031_BASEADD_INTERRUPTS },
 };
 
+static struct reg_default twl4030_49_defaults[] = {
+	/* Audio Registers */
+	{ 0x01, 0x00}, /* CODEC_MODE	*/
+	{ 0x02, 0x00}, /* OPTION	*/
+	/* 0x03  Unused	*/
+	{ 0x04, 0x00}, /* MICBIAS_CTL	*/
+	{ 0x05, 0x00}, /* ANAMICL	*/
+	{ 0x06, 0x00}, /* ANAMICR	*/
+	{ 0x07, 0x00}, /* AVADC_CTL	*/
+	{ 0x08, 0x00}, /* ADCMICSEL	*/
+	{ 0x09, 0x00}, /* DIGMIXING	*/
+	{ 0x0a, 0x0f}, /* ATXL1PGA	*/
+	{ 0x0b, 0x0f}, /* ATXR1PGA	*/
+	{ 0x0c, 0x0f}, /* AVTXL2PGA	*/
+	{ 0x0d, 0x0f}, /* AVTXR2PGA	*/
+	{ 0x0e, 0x00}, /* AUDIO_IF	*/
+	{ 0x0f, 0x00}, /* VOICE_IF	*/
+	{ 0x10, 0x3f}, /* ARXR1PGA	*/
+	{ 0x11, 0x3f}, /* ARXL1PGA	*/
+	{ 0x12, 0x3f}, /* ARXR2PGA	*/
+	{ 0x13, 0x3f}, /* ARXL2PGA	*/
+	{ 0x14, 0x25}, /* VRXPGA	*/
+	{ 0x15, 0x00}, /* VSTPGA	*/
+	{ 0x16, 0x00}, /* VRX2ARXPGA	*/
+	{ 0x17, 0x00}, /* AVDAC_CTL	*/
+	{ 0x18, 0x00}, /* ARX2VTXPGA	*/
+	{ 0x19, 0x32}, /* ARXL1_APGA_CTL*/
+	{ 0x1a, 0x32}, /* ARXR1_APGA_CTL*/
+	{ 0x1b, 0x32}, /* ARXL2_APGA_CTL*/
+	{ 0x1c, 0x32}, /* ARXR2_APGA_CTL*/
+	{ 0x1d, 0x00}, /* ATX2ARXPGA	*/
+	{ 0x1e, 0x00}, /* BT_IF		*/
+	{ 0x1f, 0x55}, /* BTPGA		*/
+	{ 0x20, 0x00}, /* BTSTPGA	*/
+	{ 0x21, 0x00}, /* EAR_CTL	*/
+	{ 0x22, 0x00}, /* HS_SEL	*/
+	{ 0x23, 0x00}, /* HS_GAIN_SET	*/
+	{ 0x24, 0x00}, /* HS_POPN_SET	*/
+	{ 0x25, 0x00}, /* PREDL_CTL	*/
+	{ 0x26, 0x00}, /* PREDR_CTL	*/
+	{ 0x27, 0x00}, /* PRECKL_CTL	*/
+	{ 0x28, 0x00}, /* PRECKR_CTL	*/
+	{ 0x29, 0x00}, /* HFL_CTL	*/
+	{ 0x2a, 0x00}, /* HFR_CTL	*/
+	{ 0x2b, 0x05}, /* ALC_CTL	*/
+	{ 0x2c, 0x00}, /* ALC_SET1	*/
+	{ 0x2d, 0x00}, /* ALC_SET2	*/
+	{ 0x2e, 0x00}, /* BOOST_CTL	*/
+	{ 0x2f, 0x00}, /* SOFTVOL_CTL	*/
+	{ 0x30, 0x13}, /* DTMF_FREQSEL	*/
+	{ 0x31, 0x00}, /* DTMF_TONEXT1H	*/
+	{ 0x32, 0x00}, /* DTMF_TONEXT1L	*/
+	{ 0x33, 0x00}, /* DTMF_TONEXT2H	*/
+	{ 0x34, 0x00}, /* DTMF_TONEXT2L	*/
+	{ 0x35, 0x79}, /* DTMF_TONOFF	*/
+	{ 0x36, 0x11}, /* DTMF_WANONOFF	*/
+	{ 0x37, 0x00}, /* I2S_RX_SCRAMBLE_H */
+	{ 0x38, 0x00}, /* I2S_RX_SCRAMBLE_M */
+	{ 0x39, 0x00}, /* I2S_RX_SCRAMBLE_L */
+	{ 0x3a, 0x06}, /* APLL_CTL */
+	{ 0x3b, 0x00}, /* DTMF_CTL */
+	{ 0x3c, 0x44}, /* DTMF_PGA_CTL2	(0x3C) */
+	{ 0x3d, 0x69}, /* DTMF_PGA_CTL1	(0x3D) */
+	{ 0x3e, 0x00}, /* MISC_SET_1 */
+	{ 0x3f, 0x00}, /* PCMBTMUX */
+	/* 0x40 - 0x42  Unused */
+	{ 0x43, 0x00}, /* RX_PATH_SEL */
+	{ 0x44, 0x32}, /* VDL_APGA_CTL */
+	{ 0x45, 0x00}, /* VIBRA_CTL */
+	{ 0x46, 0x00}, /* VIBRA_SET */
+	{ 0x47, 0x00}, /* VIBRA_PWM_SET	*/
+	{ 0x48, 0x00}, /* ANAMIC_GAIN	*/
+	{ 0x49, 0x00}, /* MISC_SET_2	*/
+	/* End of Audio Registers */
+};
+
+static bool twl4030_49_nop_reg(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case 0:
+	case 3:
+	case 40:
+	case 41:
+	case 42:
+		return false;
+	default:
+		return true;
+	}
+}
+
+static const struct regmap_range twl4030_49_volatile_ranges[] = {
+	regmap_reg_range(TWL4030_BASEADD_TEST, 0xff),
+};
+
+static const struct regmap_access_table twl4030_49_volatile_table = {
+	.yes_ranges = twl4030_49_volatile_ranges,
+	.n_yes_ranges = ARRAY_SIZE(twl4030_49_volatile_ranges),
+};
+
 static struct regmap_config twl4030_regmap_config[4] = {
 	{
 		/* Address 0x48 */
@@ -212,6 +314,15 @@ static struct regmap_config twl4030_regmap_config[4] = {
 		.reg_bits = 8,
 		.val_bits = 8,
 		.max_register = 0xff,
+
+		.readable_reg = twl4030_49_nop_reg,
+		.writeable_reg = twl4030_49_nop_reg,
+
+		.volatile_table = &twl4030_49_volatile_table,
+
+		.reg_defaults = twl4030_49_defaults,
+		.num_reg_defaults = ARRAY_SIZE(twl4030_49_defaults),
+		.cache_type = REGCACHE_RBTREE,
 	},
 	{
 		/* Address 0x4a */
@@ -302,35 +413,50 @@ unsigned int twl_rev(void)
 EXPORT_SYMBOL(twl_rev);
 
 /**
- * twl_i2c_write - Writes a n bit register in TWL4030/TWL5030/TWL60X0
+ * twl_get_regmap - Get the regmap associated with the given module
  * @mod_no: module number
- * @value: an array of num_bytes+1 containing data to write
- * @reg: register address (just offset will do)
- * @num_bytes: number of bytes to transfer
  *
- * Returns the result of operation - 0 is success
+ * Returns the regmap pointer or NULL in case of failure.
  */
-int twl_i2c_write(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes)
+static struct regmap *twl_get_regmap(u8 mod_no)
 {
-	int ret;
 	int sid;
 	struct twl_client *twl;
 
 	if (unlikely(!twl_priv || !twl_priv->ready)) {
 		pr_err("%s: not initialized\n", DRIVER_NAME);
-		return -EPERM;
+		return NULL;
 	}
 	if (unlikely(mod_no >= twl_get_last_module())) {
 		pr_err("%s: invalid module number %d\n", DRIVER_NAME, mod_no);
-		return -EPERM;
+		return NULL;
 	}
 
 	sid = twl_priv->twl_map[mod_no].sid;
 	twl = &twl_priv->twl_modules[sid];
 
-	ret = regmap_bulk_write(twl->regmap,
-				twl_priv->twl_map[mod_no].base + reg, value,
-				num_bytes);
+	return twl->regmap;
+}
+
+/**
+ * twl_i2c_write - Writes a n bit register in TWL4030/TWL5030/TWL60X0
+ * @mod_no: module number
+ * @value: an array of num_bytes+1 containing data to write
+ * @reg: register address (just offset will do)
+ * @num_bytes: number of bytes to transfer
+ *
+ * Returns the result of operation - 0 is success
+ */
+int twl_i2c_write(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes)
+{
+	struct regmap *regmap = twl_get_regmap(mod_no);
+	int ret;
+
+	if (!regmap)
+		return -EPERM;
+
+	ret = regmap_bulk_write(regmap, twl_priv->twl_map[mod_no].base + reg,
+				value, num_bytes);
 
 	if (ret)
 		pr_err("%s: Write failed (mod %d, reg 0x%02x count %d)\n",
@@ -351,25 +477,14 @@ EXPORT_SYMBOL(twl_i2c_write);
  */
 int twl_i2c_read(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes)
 {
+	struct regmap *regmap = twl_get_regmap(mod_no);
 	int ret;
-	int sid;
-	struct twl_client *twl;
 
-	if (unlikely(!twl_priv || !twl_priv->ready)) {
-		pr_err("%s: not initialized\n", DRIVER_NAME);
-		return -EPERM;
-	}
-	if (unlikely(mod_no >= twl_get_last_module())) {
-		pr_err("%s: invalid module number %d\n", DRIVER_NAME, mod_no);
+	if (!regmap)
 		return -EPERM;
-	}
-
-	sid = twl_priv->twl_map[mod_no].sid;
-	twl = &twl_priv->twl_modules[sid];
 
-	ret = regmap_bulk_read(twl->regmap,
-			       twl_priv->twl_map[mod_no].base + reg, value,
-			       num_bytes);
+	ret = regmap_bulk_read(regmap, twl_priv->twl_map[mod_no].base + reg,
+			       value, num_bytes);
 
 	if (ret)
 		pr_err("%s: Read failed (mod %d, reg 0x%02x count %d)\n",
@@ -379,6 +494,27 @@ int twl_i2c_read(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes)
 }
 EXPORT_SYMBOL(twl_i2c_read);
 
+/**
+ * twl_regcache_bypass - Configure the regcache bypass for the regmap associated
+ *			 with the module
+ * @mod_no: module number
+ * @enable: Regcache bypass state
+ *
+ * Returns 0 else failure.
+ */
+int twl_set_regcache_bypass(u8 mod_no, bool enable)
+{
+	struct regmap *regmap = twl_get_regmap(mod_no);
+
+	if (!regmap)
+		return -EPERM;
+
+	regcache_cache_bypass(regmap, enable);
+
+	return 0;
+}
+EXPORT_SYMBOL(twl_set_regcache_bypass);
+
 /*----------------------------------------------------------------------*/
 
 /**