mfd: twl6040: Rename the core driver

After the regmap_irq conversion there is no need to call the driver
as twl6040-core.c since there is only one c file remained.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

1 files changed, 749 insertions, 0 deletions

diff --git a/drivers/mfd/twl6040.c b/drivers/mfd/twl6040.c
new file mode 100644
index 00000000000..e5f7b795aff
--- /dev/null
+++ b/drivers/mfd/twl6040.c
@@ -0,0 +1,749 @@
+/*
+ * MFD driver for TWL6040 audio device
+ *
+ * Authors:	Misael Lopez Cruz <misael.lopez@ti.com>
+ *		Jorge Eduardo Candelaria <jorge.candelaria@ti.com>
+ *		Peter Ujfalusi <peter.ujfalusi@ti.com>
+ *
+ * Copyright:	(C) 2011 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/slab.h>
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/of_gpio.h>
+#include <linux/of_platform.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/regmap.h>
+#include <linux/err.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/twl6040.h>
+#include <linux/regulator/consumer.h>
+
+#define VIBRACTRL_MEMBER(reg) ((reg == TWL6040_REG_VIBCTLL) ? 0 : 1)
+#define TWL6040_NUM_SUPPLIES	(2)
+
+static bool twl6040_has_vibra(struct twl6040_platform_data *pdata,
+			      struct device_node *node)
+{
+	if (pdata && pdata->vibra)
+		return true;
+
+#ifdef CONFIG_OF
+	if (of_find_node_by_name(node, "vibra"))
+		return true;
+#endif
+
+	return false;
+}
+
+int twl6040_reg_read(struct twl6040 *twl6040, unsigned int reg)
+{
+	int ret;
+	unsigned int val;
+
+	/* Vibra control registers from cache */
+	if (unlikely(reg == TWL6040_REG_VIBCTLL ||
+		     reg == TWL6040_REG_VIBCTLR)) {
+		val = twl6040->vibra_ctrl_cache[VIBRACTRL_MEMBER(reg)];
+	} else {
+		ret = regmap_read(twl6040->regmap, reg, &val);
+		if (ret < 0)
+			return ret;
+	}
+
+	return val;
+}
+EXPORT_SYMBOL(twl6040_reg_read);
+
+int twl6040_reg_write(struct twl6040 *twl6040, unsigned int reg, u8 val)
+{
+	int ret;
+
+	ret = regmap_write(twl6040->regmap, reg, val);
+	/* Cache the vibra control registers */
+	if (reg == TWL6040_REG_VIBCTLL || reg == TWL6040_REG_VIBCTLR)
+		twl6040->vibra_ctrl_cache[VIBRACTRL_MEMBER(reg)] = val;
+
+	return ret;
+}
+EXPORT_SYMBOL(twl6040_reg_write);
+
+int twl6040_set_bits(struct twl6040 *twl6040, unsigned int reg, u8 mask)
+{
+	return regmap_update_bits(twl6040->regmap, reg, mask, mask);
+}
+EXPORT_SYMBOL(twl6040_set_bits);
+
+int twl6040_clear_bits(struct twl6040 *twl6040, unsigned int reg, u8 mask)
+{
+	return regmap_update_bits(twl6040->regmap, reg, mask, 0);
+}
+EXPORT_SYMBOL(twl6040_clear_bits);
+
+/* twl6040 codec manual power-up sequence */
+static int twl6040_power_up_manual(struct twl6040 *twl6040)
+{
+	u8 ldoctl, ncpctl, lppllctl;
+	int ret;
+
+	/* enable high-side LDO, reference system and internal oscillator */
+	ldoctl = TWL6040_HSLDOENA | TWL6040_REFENA | TWL6040_OSCENA;
+	ret = twl6040_reg_write(twl6040, TWL6040_REG_LDOCTL, ldoctl);
+	if (ret)
+		return ret;
+	usleep_range(10000, 10500);
+
+	/* enable negative charge pump */
+	ncpctl = TWL6040_NCPENA;
+	ret = twl6040_reg_write(twl6040, TWL6040_REG_NCPCTL, ncpctl);
+	if (ret)
+		goto ncp_err;
+	usleep_range(1000, 1500);
+
+	/* enable low-side LDO */
+	ldoctl |= TWL6040_LSLDOENA;
+	ret = twl6040_reg_write(twl6040, TWL6040_REG_LDOCTL, ldoctl);
+	if (ret)
+		goto lsldo_err;
+	usleep_range(1000, 1500);
+
+	/* enable low-power PLL */
+	lppllctl = TWL6040_LPLLENA;
+	ret = twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL, lppllctl);
+	if (ret)
+		goto lppll_err;
+	usleep_range(5000, 5500);
+
+	/* disable internal oscillator */
+	ldoctl &= ~TWL6040_OSCENA;
+	ret = twl6040_reg_write(twl6040, TWL6040_REG_LDOCTL, ldoctl);
+	if (ret)
+		goto osc_err;
+
+	return 0;
+
+osc_err:
+	lppllctl &= ~TWL6040_LPLLENA;
+	twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL, lppllctl);
+lppll_err:
+	ldoctl &= ~TWL6040_LSLDOENA;
+	twl6040_reg_write(twl6040, TWL6040_REG_LDOCTL, ldoctl);
+lsldo_err:
+	ncpctl &= ~TWL6040_NCPENA;
+	twl6040_reg_write(twl6040, TWL6040_REG_NCPCTL, ncpctl);
+ncp_err:
+	ldoctl &= ~(TWL6040_HSLDOENA | TWL6040_REFENA | TWL6040_OSCENA);
+	twl6040_reg_write(twl6040, TWL6040_REG_LDOCTL, ldoctl);
+
+	dev_err(twl6040->dev, "manual power-up failed\n");
+	return ret;
+}
+
+/* twl6040 manual power-down sequence */
+static void twl6040_power_down_manual(struct twl6040 *twl6040)
+{
+	u8 ncpctl, ldoctl, lppllctl;
+
+	ncpctl = twl6040_reg_read(twl6040, TWL6040_REG_NCPCTL);
+	ldoctl = twl6040_reg_read(twl6040, TWL6040_REG_LDOCTL);
+	lppllctl = twl6040_reg_read(twl6040, TWL6040_REG_LPPLLCTL);
+
+	/* enable internal oscillator */
+	ldoctl |= TWL6040_OSCENA;
+	twl6040_reg_write(twl6040, TWL6040_REG_LDOCTL, ldoctl);
+	usleep_range(1000, 1500);
+
+	/* disable low-power PLL */
+	lppllctl &= ~TWL6040_LPLLENA;
+	twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL, lppllctl);
+
+	/* disable low-side LDO */
+	ldoctl &= ~TWL6040_LSLDOENA;
+	twl6040_reg_write(twl6040, TWL6040_REG_LDOCTL, ldoctl);
+
+	/* disable negative charge pump */
+	ncpctl &= ~TWL6040_NCPENA;
+	twl6040_reg_write(twl6040, TWL6040_REG_NCPCTL, ncpctl);
+
+	/* disable high-side LDO, reference system and internal oscillator */
+	ldoctl &= ~(TWL6040_HSLDOENA | TWL6040_REFENA | TWL6040_OSCENA);
+	twl6040_reg_write(twl6040, TWL6040_REG_LDOCTL, ldoctl);
+}
+
+static irqreturn_t twl6040_readyint_handler(int irq, void *data)
+{
+	struct twl6040 *twl6040 = data;
+
+	complete(&twl6040->ready);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t twl6040_thint_handler(int irq, void *data)
+{
+	struct twl6040 *twl6040 = data;
+	u8 status;
+
+	status = twl6040_reg_read(twl6040, TWL6040_REG_STATUS);
+	if (status & TWL6040_TSHUTDET) {
+		dev_warn(twl6040->dev, "Thermal shutdown, powering-off");
+		twl6040_power(twl6040, 0);
+	} else {
+		dev_warn(twl6040->dev, "Leaving thermal shutdown, powering-on");
+		twl6040_power(twl6040, 1);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static int twl6040_power_up_automatic(struct twl6040 *twl6040)
+{
+	int time_left;
+
+	gpio_set_value(twl6040->audpwron, 1);
+
+	time_left = wait_for_completion_timeout(&twl6040->ready,
+						msecs_to_jiffies(144));
+	if (!time_left) {
+		u8 intid;
+
+		dev_warn(twl6040->dev, "timeout waiting for READYINT\n");
+		intid = twl6040_reg_read(twl6040, TWL6040_REG_INTID);
+		if (!(intid & TWL6040_READYINT)) {
+			dev_err(twl6040->dev, "automatic power-up failed\n");
+			gpio_set_value(twl6040->audpwron, 0);
+			return -ETIMEDOUT;
+		}
+	}
+
+	return 0;
+}
+
+int twl6040_power(struct twl6040 *twl6040, int on)
+{
+	int ret = 0;
+
+	mutex_lock(&twl6040->mutex);
+
+	if (on) {
+		/* already powered-up */
+		if (twl6040->power_count++)
+			goto out;
+
+		if (gpio_is_valid(twl6040->audpwron)) {
+			/* use automatic power-up sequence */
+			ret = twl6040_power_up_automatic(twl6040);
+			if (ret) {
+				twl6040->power_count = 0;
+				goto out;
+			}
+		} else {
+			/* use manual power-up sequence */
+			ret = twl6040_power_up_manual(twl6040);
+			if (ret) {
+				twl6040->power_count = 0;
+				goto out;
+			}
+		}
+		/* Default PLL configuration after power up */
+		twl6040->pll = TWL6040_SYSCLK_SEL_LPPLL;
+		twl6040->sysclk = 19200000;
+		twl6040->mclk = 32768;
+	} else {
+		/* already powered-down */
+		if (!twl6040->power_count) {
+			dev_err(twl6040->dev,
+				"device is already powered-off\n");
+			ret = -EPERM;
+			goto out;
+		}
+
+		if (--twl6040->power_count)
+			goto out;
+
+		if (gpio_is_valid(twl6040->audpwron)) {
+			/* use AUDPWRON line */
+			gpio_set_value(twl6040->audpwron, 0);
+
+			/* power-down sequence latency */
+			usleep_range(500, 700);
+		} else {
+			/* use manual power-down sequence */
+			twl6040_power_down_manual(twl6040);
+		}
+		twl6040->sysclk = 0;
+		twl6040->mclk = 0;
+	}
+
+out:
+	mutex_unlock(&twl6040->mutex);
+	return ret;
+}
+EXPORT_SYMBOL(twl6040_power);
+
+int twl6040_set_pll(struct twl6040 *twl6040, int pll_id,
+		    unsigned int freq_in, unsigned int freq_out)
+{
+	u8 hppllctl, lppllctl;
+	int ret = 0;
+
+	mutex_lock(&twl6040->mutex);
+
+	hppllctl = twl6040_reg_read(twl6040, TWL6040_REG_HPPLLCTL);
+	lppllctl = twl6040_reg_read(twl6040, TWL6040_REG_LPPLLCTL);
+
+	/* Force full reconfiguration when switching between PLL */
+	if (pll_id != twl6040->pll) {
+		twl6040->sysclk = 0;
+		twl6040->mclk = 0;
+	}
+
+	switch (pll_id) {
+	case TWL6040_SYSCLK_SEL_LPPLL:
+		/* low-power PLL divider */
+		/* Change the sysclk configuration only if it has been canged */
+		if (twl6040->sysclk != freq_out) {
+			switch (freq_out) {
+			case 17640000:
+				lppllctl |= TWL6040_LPLLFIN;
+				break;
+			case 19200000:
+				lppllctl &= ~TWL6040_LPLLFIN;
+				break;
+			default:
+				dev_err(twl6040->dev,
+					"freq_out %d not supported\n",
+					freq_out);
+				ret = -EINVAL;
+				goto pll_out;
+			}
+			twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL,
+					  lppllctl);
+		}
+
+		/* The PLL in use has not been change, we can exit */
+		if (twl6040->pll == pll_id)
+			break;
+
+		switch (freq_in) {
+		case 32768:
+			lppllctl |= TWL6040_LPLLENA;
+			twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL,
+					  lppllctl);
+			mdelay(5);
+			lppllctl &= ~TWL6040_HPLLSEL;
+			twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL,
+					  lppllctl);
+			hppllctl &= ~TWL6040_HPLLENA;
+			twl6040_reg_write(twl6040, TWL6040_REG_HPPLLCTL,
+					  hppllctl);
+			break;
+		default:
+			dev_err(twl6040->dev,
+				"freq_in %d not supported\n", freq_in);
+			ret = -EINVAL;
+			goto pll_out;
+		}
+		break;
+	case TWL6040_SYSCLK_SEL_HPPLL:
+		/* high-performance PLL can provide only 19.2 MHz */
+		if (freq_out != 19200000) {
+			dev_err(twl6040->dev,
+				"freq_out %d not supported\n", freq_out);
+			ret = -EINVAL;
+			goto pll_out;
+		}
+
+		if (twl6040->mclk != freq_in) {
+			hppllctl &= ~TWL6040_MCLK_MSK;
+
+			switch (freq_in) {
+			case 12000000:
+				/* PLL enabled, active mode */
+				hppllctl |= TWL6040_MCLK_12000KHZ |
+					    TWL6040_HPLLENA;
+				break;
+			case 19200000:
+				/*
+				* PLL disabled
+				* (enable PLL if MCLK jitter quality
+				*  doesn't meet specification)
+				*/
+				hppllctl |= TWL6040_MCLK_19200KHZ;
+				break;
+			case 26000000:
+				/* PLL enabled, active mode */
+				hppllctl |= TWL6040_MCLK_26000KHZ |
+					    TWL6040_HPLLENA;
+				break;
+			case 38400000:
+				/* PLL enabled, active mode */
+				hppllctl |= TWL6040_MCLK_38400KHZ |
+					    TWL6040_HPLLENA;
+				break;
+			default:
+				dev_err(twl6040->dev,
+					"freq_in %d not supported\n", freq_in);
+				ret = -EINVAL;
+				goto pll_out;
+			}
+
+			/*
+			 * enable clock slicer to ensure input waveform is
+			 * square
+			 */
+			hppllctl |= TWL6040_HPLLSQRENA;
+
+			twl6040_reg_write(twl6040, TWL6040_REG_HPPLLCTL,
+					  hppllctl);
+			usleep_range(500, 700);
+			lppllctl |= TWL6040_HPLLSEL;
+			twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL,
+					  lppllctl);
+			lppllctl &= ~TWL6040_LPLLENA;
+			twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL,
+					  lppllctl);
+		}
+		break;
+	default:
+		dev_err(twl6040->dev, "unknown pll id %d\n", pll_id);
+		ret = -EINVAL;
+		goto pll_out;
+	}
+
+	twl6040->sysclk = freq_out;
+	twl6040->mclk = freq_in;
+	twl6040->pll = pll_id;
+
+pll_out:
+	mutex_unlock(&twl6040->mutex);
+	return ret;
+}
+EXPORT_SYMBOL(twl6040_set_pll);
+
+int twl6040_get_pll(struct twl6040 *twl6040)
+{
+	if (twl6040->power_count)
+		return twl6040->pll;
+	else
+		return -ENODEV;
+}
+EXPORT_SYMBOL(twl6040_get_pll);
+
+unsigned int twl6040_get_sysclk(struct twl6040 *twl6040)
+{
+	return twl6040->sysclk;
+}
+EXPORT_SYMBOL(twl6040_get_sysclk);
+
+/* Get the combined status of the vibra control register */
+int twl6040_get_vibralr_status(struct twl6040 *twl6040)
+{
+	u8 status;
+
+	status = twl6040->vibra_ctrl_cache[0] | twl6040->vibra_ctrl_cache[1];
+	status &= (TWL6040_VIBENA | TWL6040_VIBSEL);
+
+	return status;
+}
+EXPORT_SYMBOL(twl6040_get_vibralr_status);
+
+static struct resource twl6040_vibra_rsrc[] = {
+	{
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct resource twl6040_codec_rsrc[] = {
+	{
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static bool twl6040_readable_reg(struct device *dev, unsigned int reg)
+{
+	/* Register 0 is not readable */
+	if (!reg)
+		return false;
+	return true;
+}
+
+static struct regmap_config twl6040_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = TWL6040_REG_STATUS, /* 0x2e */
+
+	.readable_reg = twl6040_readable_reg,
+};
+
+static const struct regmap_irq twl6040_irqs[] = {
+	{ .reg_offset = 0, .mask = TWL6040_THINT, },
+	{ .reg_offset = 0, .mask = TWL6040_PLUGINT | TWL6040_UNPLUGINT, },
+	{ .reg_offset = 0, .mask = TWL6040_HOOKINT, },
+	{ .reg_offset = 0, .mask = TWL6040_HFINT, },
+	{ .reg_offset = 0, .mask = TWL6040_VIBINT, },
+	{ .reg_offset = 0, .mask = TWL6040_READYINT, },
+};
+
+static struct regmap_irq_chip twl6040_irq_chip = {
+	.name = "twl6040",
+	.irqs = twl6040_irqs,
+	.num_irqs = ARRAY_SIZE(twl6040_irqs),
+
+	.num_regs = 1,
+	.status_base = TWL6040_REG_INTID,
+	.mask_base = TWL6040_REG_INTMR,
+};
+
+static int __devinit twl6040_probe(struct i2c_client *client,
+				     const struct i2c_device_id *id)
+{
+	struct twl6040_platform_data *pdata = client->dev.platform_data;
+	struct device_node *node = client->dev.of_node;
+	struct twl6040 *twl6040;
+	struct mfd_cell *cell = NULL;
+	int irq, ret, children = 0;
+
+	if (!pdata && !node) {
+		dev_err(&client->dev, "Platform data is missing\n");
+		return -EINVAL;
+	}
+
+	/* In order to operate correctly we need valid interrupt config */
+	if (!client->irq) {
+		dev_err(&client->dev, "Invalid IRQ configuration\n");
+		return -EINVAL;
+	}
+
+	twl6040 = devm_kzalloc(&client->dev, sizeof(struct twl6040),
+			       GFP_KERNEL);
+	if (!twl6040) {
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	twl6040->regmap = devm_regmap_init_i2c(client, &twl6040_regmap_config);
+	if (IS_ERR(twl6040->regmap)) {
+		ret = PTR_ERR(twl6040->regmap);
+		goto err;
+	}
+
+	i2c_set_clientdata(client, twl6040);
+
+	twl6040->supplies[0].supply = "vio";
+	twl6040->supplies[1].supply = "v2v1";
+	ret = regulator_bulk_get(&client->dev, TWL6040_NUM_SUPPLIES,
+				 twl6040->supplies);
+	if (ret != 0) {
+		dev_err(&client->dev, "Failed to get supplies: %d\n", ret);
+		goto regulator_get_err;
+	}
+
+	ret = regulator_bulk_enable(TWL6040_NUM_SUPPLIES, twl6040->supplies);
+	if (ret != 0) {
+		dev_err(&client->dev, "Failed to enable supplies: %d\n", ret);
+		goto power_err;
+	}
+
+	twl6040->dev = &client->dev;
+	twl6040->irq = client->irq;
+
+	mutex_init(&twl6040->mutex);
+	init_completion(&twl6040->ready);
+
+	twl6040->rev = twl6040_reg_read(twl6040, TWL6040_REG_ASICREV);
+
+	/* ERRATA: Automatic power-up is not possible in ES1.0 */
+	if (twl6040_get_revid(twl6040) > TWL6040_REV_ES1_0) {
+		if (pdata)
+			twl6040->audpwron = pdata->audpwron_gpio;
+		else
+			twl6040->audpwron = of_get_named_gpio(node,
+						"ti,audpwron-gpio", 0);
+	} else
+		twl6040->audpwron = -EINVAL;
+
+	if (gpio_is_valid(twl6040->audpwron)) {
+		ret = gpio_request_one(twl6040->audpwron, GPIOF_OUT_INIT_LOW,
+				       "audpwron");
+		if (ret)
+			goto gpio_err;
+	}
+
+	ret = regmap_add_irq_chip(twl6040->regmap, twl6040->irq,
+			IRQF_ONESHOT, 0, &twl6040_irq_chip,
+			&twl6040->irq_data);
+	if (ret < 0)
+		goto irq_init_err;
+
+	twl6040->irq_ready = regmap_irq_get_virq(twl6040->irq_data,
+					       TWL6040_IRQ_READY);
+	twl6040->irq_th = regmap_irq_get_virq(twl6040->irq_data,
+					       TWL6040_IRQ_TH);
+
+	ret = request_threaded_irq(twl6040->irq_ready, NULL,
+				   twl6040_readyint_handler, IRQF_ONESHOT,
+				   "twl6040_irq_ready", twl6040);
+	if (ret) {
+		dev_err(twl6040->dev, "READY IRQ request failed: %d\n", ret);
+		goto readyirq_err;
+	}
+
+	ret = request_threaded_irq(twl6040->irq_th, NULL,
+				   twl6040_thint_handler, IRQF_ONESHOT,
+				   "twl6040_irq_th", twl6040);
+	if (ret) {
+		dev_err(twl6040->dev, "Thermal IRQ request failed: %d\n", ret);
+		goto thirq_err;
+	}
+
+	/* dual-access registers controlled by I2C only */
+	twl6040_set_bits(twl6040, TWL6040_REG_ACCCTL, TWL6040_I2CSEL);
+
+	/*
+	 * The main functionality of twl6040 to provide audio on OMAP4+ systems.
+	 * We can add the ASoC codec child whenever this driver has been loaded.
+	 * The ASoC codec can work without pdata, pass the platform_data only if
+	 * it has been provided.
+	 */
+	irq = regmap_irq_get_virq(twl6040->irq_data, TWL6040_IRQ_PLUG);
+	cell = &twl6040->cells[children];
+	cell->name = "twl6040-codec";
+	twl6040_codec_rsrc[0].start = irq;
+	twl6040_codec_rsrc[0].end = irq;
+	cell->resources = twl6040_codec_rsrc;
+	cell->num_resources = ARRAY_SIZE(twl6040_codec_rsrc);
+	if (pdata && pdata->codec) {
+		cell->platform_data = pdata->codec;
+		cell->pdata_size = sizeof(*pdata->codec);
+	}
+	children++;
+
+	if (twl6040_has_vibra(pdata, node)) {
+		irq = regmap_irq_get_virq(twl6040->irq_data, TWL6040_IRQ_VIB);
+
+		cell = &twl6040->cells[children];
+		cell->name = "twl6040-vibra";
+		twl6040_vibra_rsrc[0].start = irq;
+		twl6040_vibra_rsrc[0].end = irq;
+		cell->resources = twl6040_vibra_rsrc;
+		cell->num_resources = ARRAY_SIZE(twl6040_vibra_rsrc);
+
+		if (pdata && pdata->vibra) {
+			cell->platform_data = pdata->vibra;
+			cell->pdata_size = sizeof(*pdata->vibra);
+		}
+		children++;
+	}
+
+	/*
+	 * Enable the GPO driver in the following cases:
+	 * DT booted kernel or legacy boot with valid gpo platform_data
+	 */
+	if (!pdata || (pdata && pdata->gpo)) {
+		cell = &twl6040->cells[children];
+		cell->name = "twl6040-gpo";
+
+		if (pdata) {
+			cell->platform_data = pdata->gpo;
+			cell->pdata_size = sizeof(*pdata->gpo);
+		}
+		children++;
+	}
+
+	ret = mfd_add_devices(&client->dev, -1, twl6040->cells, children,
+			      NULL, 0, NULL);
+	if (ret)
+		goto mfd_err;
+
+	return 0;
+
+mfd_err:
+	free_irq(twl6040->irq_th, twl6040);
+thirq_err:
+	free_irq(twl6040->irq_ready, twl6040);
+readyirq_err:
+	regmap_del_irq_chip(twl6040->irq, twl6040->irq_data);
+irq_init_err:
+	if (gpio_is_valid(twl6040->audpwron))
+		gpio_free(twl6040->audpwron);
+gpio_err:
+	regulator_bulk_disable(TWL6040_NUM_SUPPLIES, twl6040->supplies);
+power_err:
+	regulator_bulk_free(TWL6040_NUM_SUPPLIES, twl6040->supplies);
+regulator_get_err:
+	i2c_set_clientdata(client, NULL);
+err:
+	return ret;
+}
+
+static int __devexit twl6040_remove(struct i2c_client *client)
+{
+	struct twl6040 *twl6040 = i2c_get_clientdata(client);
+
+	if (twl6040->power_count)
+		twl6040_power(twl6040, 0);
+
+	if (gpio_is_valid(twl6040->audpwron))
+		gpio_free(twl6040->audpwron);
+
+	free_irq(twl6040->irq_ready, twl6040);
+	free_irq(twl6040->irq_th, twl6040);
+	regmap_del_irq_chip(twl6040->irq, twl6040->irq_data);
+
+	mfd_remove_devices(&client->dev);
+	i2c_set_clientdata(client, NULL);
+
+	regulator_bulk_disable(TWL6040_NUM_SUPPLIES, twl6040->supplies);
+	regulator_bulk_free(TWL6040_NUM_SUPPLIES, twl6040->supplies);
+
+	return 0;
+}
+
+static const struct i2c_device_id twl6040_i2c_id[] = {
+	{ "twl6040", 0, },
+	{ "twl6041", 0, },
+	{ },
+};
+MODULE_DEVICE_TABLE(i2c, twl6040_i2c_id);
+
+static struct i2c_driver twl6040_driver = {
+	.driver = {
+		.name = "twl6040",
+		.owner = THIS_MODULE,
+	},
+	.probe		= twl6040_probe,
+	.remove		= __devexit_p(twl6040_remove),
+	.id_table	= twl6040_i2c_id,
+};
+
+module_i2c_driver(twl6040_driver);
+
+MODULE_DESCRIPTION("TWL6040 MFD");
+MODULE_AUTHOR("Misael Lopez Cruz <misael.lopez@ti.com>");
+MODULE_AUTHOR("Jorge Eduardo Candelaria <jorge.candelaria@ti.com>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:twl6040");