mfd: Remove custom wm8350 cache implementation

Since none of the users now reference the cache directly we can happily
remove the custom cache code and rely on the regmap cache.

For simplicity we don't bother with the register defaults tables but
instead read the defaults from the device - regmap is capable of doing
this, unlike our old cache infrastructure. This saves a lot of code and
allows us to cache the device revision information too.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

1 files changed, 11 insertions, 314 deletions

diff --git a/drivers/mfd/wm8350-core.c b/drivers/mfd/wm8350-core.c
index fadcbbe9e2b..7c1ae24605d 100644
--- a/drivers/mfd/wm8350-core.c
+++ b/drivers/mfd/wm8350-core.c
@@ -60,181 +60,32 @@
 /*
  * WM8350 Device IO
  */
-static DEFINE_MUTEX(io_mutex);
 static DEFINE_MUTEX(reg_lock_mutex);
 
-/* Perform a physical read from the device.
- */
-static int wm8350_phys_read(struct wm8350 *wm8350, u8 reg, int num_regs,
-			    u16 *dest)
-{
-	int i, ret;
-	int bytes = num_regs * 2;
-
-	dev_dbg(wm8350->dev, "volatile read\n");
-	ret = regmap_raw_read(wm8350->regmap, reg, dest, bytes);
-
-	for (i = reg; i < reg + num_regs; i++) {
-		/* Cache is CPU endian */
-		dest[i - reg] = be16_to_cpu(dest[i - reg]);
-
-		/* Mask out non-readable bits */
-		dest[i - reg] &= wm8350_reg_io_map[i].readable;
-	}
-
-	dump(num_regs, dest);
-
-	return ret;
-}
-
-static int wm8350_read(struct wm8350 *wm8350, u8 reg, int num_regs, u16 *dest)
-{
-	int i;
-	int end = reg + num_regs;
-	int ret = 0;
-	int bytes = num_regs * 2;
-
-	if ((reg + num_regs - 1) > WM8350_MAX_REGISTER) {
-		dev_err(wm8350->dev, "invalid reg %x\n",
-			reg + num_regs - 1);
-		return -EINVAL;
-	}
-
-	dev_dbg(wm8350->dev,
-		"%s R%d(0x%2.2x) %d regs\n", __func__, reg, reg, num_regs);
-
-#if WM8350_BUS_DEBUG
-	/* we can _safely_ read any register, but warn if read not supported */
-	for (i = reg; i < end; i++) {
-		if (!wm8350_reg_io_map[i].readable)
-			dev_warn(wm8350->dev,
-				"reg R%d is not readable\n", i);
-	}
-#endif
-
-	/* if any volatile registers are required, then read back all */
-	for (i = reg; i < end; i++)
-		if (wm8350_reg_io_map[i].vol)
-			return wm8350_phys_read(wm8350, reg, num_regs, dest);
-
-	/* no volatiles, then cache is good */
-	dev_dbg(wm8350->dev, "cache read\n");
-	memcpy(dest, &wm8350->reg_cache[reg], bytes);
-	dump(num_regs, dest);
-	return ret;
-}
-
-static inline int is_reg_locked(struct wm8350 *wm8350, u8 reg)
-{
-	if (reg == WM8350_SECURITY ||
-	    wm8350->reg_cache[WM8350_SECURITY] == WM8350_UNLOCK_KEY)
-		return 0;
-
-	if ((reg >= WM8350_GPIO_FUNCTION_SELECT_1 &&
-	     reg <= WM8350_GPIO_FUNCTION_SELECT_4) ||
-	    (reg >= WM8350_BATTERY_CHARGER_CONTROL_1 &&
-	     reg <= WM8350_BATTERY_CHARGER_CONTROL_3))
-		return 1;
-	return 0;
-}
-
-static int wm8350_write(struct wm8350 *wm8350, u8 reg, int num_regs, u16 *src)
-{
-	int i;
-	int end = reg + num_regs;
-	int bytes = num_regs * 2;
-
-	if ((reg + num_regs - 1) > WM8350_MAX_REGISTER) {
-		dev_err(wm8350->dev, "invalid reg %x\n",
-			reg + num_regs - 1);
-		return -EINVAL;
-	}
-
-	/* it's generally not a good idea to write to RO or locked registers */
-	for (i = reg; i < end; i++) {
-		if (!wm8350_reg_io_map[i].writable) {
-			dev_err(wm8350->dev,
-				"attempted write to read only reg R%d\n", i);
-			return -EINVAL;
-		}
-
-		if (is_reg_locked(wm8350, i)) {
-			dev_err(wm8350->dev,
-			       "attempted write to locked reg R%d\n", i);
-			return -EINVAL;
-		}
-
-		src[i - reg] &= wm8350_reg_io_map[i].writable;
-
-		wm8350->reg_cache[i] =
-			(wm8350->reg_cache[i] & ~wm8350_reg_io_map[i].writable)
-			| src[i - reg];
-
-		src[i - reg] = cpu_to_be16(src[i - reg]);
-	}
-
-	/* Actually write it out */
-	return regmap_raw_write(wm8350->regmap, reg, src, bytes);
-}
-
 /*
  * Safe read, modify, write methods
  */
 int wm8350_clear_bits(struct wm8350 *wm8350, u16 reg, u16 mask)
 {
-	u16 data;
-	int err;
-
-	mutex_lock(&io_mutex);
-	err = wm8350_read(wm8350, reg, 1, &data);
-	if (err) {
-		dev_err(wm8350->dev, "read from reg R%d failed\n", reg);
-		goto out;
-	}
-
-	data &= ~mask;
-	err = wm8350_write(wm8350, reg, 1, &data);
-	if (err)
-		dev_err(wm8350->dev, "write to reg R%d failed\n", reg);
-out:
-	mutex_unlock(&io_mutex);
-	return err;
+	return regmap_update_bits(wm8350->regmap, reg, mask, 0);
 }
 EXPORT_SYMBOL_GPL(wm8350_clear_bits);
 
 int wm8350_set_bits(struct wm8350 *wm8350, u16 reg, u16 mask)
 {
-	u16 data;
-	int err;
-
-	mutex_lock(&io_mutex);
-	err = wm8350_read(wm8350, reg, 1, &data);
-	if (err) {
-		dev_err(wm8350->dev, "read from reg R%d failed\n", reg);
-		goto out;
-	}
-
-	data |= mask;
-	err = wm8350_write(wm8350, reg, 1, &data);
-	if (err)
-		dev_err(wm8350->dev, "write to reg R%d failed\n", reg);
-out:
-	mutex_unlock(&io_mutex);
-	return err;
+	return regmap_update_bits(wm8350->regmap, reg, mask, mask);
 }
 EXPORT_SYMBOL_GPL(wm8350_set_bits);
 
 u16 wm8350_reg_read(struct wm8350 *wm8350, int reg)
 {
-	u16 data;
+	unsigned int data;
 	int err;
 
-	mutex_lock(&io_mutex);
-	err = wm8350_read(wm8350, reg, 1, &data);
+	err = regmap_read(wm8350->regmap, reg, &data);
 	if (err)
 		dev_err(wm8350->dev, "read from reg R%d failed\n", reg);
 
-	mutex_unlock(&io_mutex);
 	return data;
 }
 EXPORT_SYMBOL_GPL(wm8350_reg_read);
@@ -242,13 +93,11 @@ EXPORT_SYMBOL_GPL(wm8350_reg_read);
 int wm8350_reg_write(struct wm8350 *wm8350, int reg, u16 val)
 {
 	int ret;
-	u16 data = val;
 
-	mutex_lock(&io_mutex);
-	ret = wm8350_write(wm8350, reg, 1, &data);
+	ret = regmap_write(wm8350->regmap, reg, val);
+
 	if (ret)
 		dev_err(wm8350->dev, "write to reg R%d failed\n", reg);
-	mutex_unlock(&io_mutex);
 	return ret;
 }
 EXPORT_SYMBOL_GPL(wm8350_reg_write);
@@ -258,12 +107,11 @@ int wm8350_block_read(struct wm8350 *wm8350, int start_reg, int regs,
 {
 	int err = 0;
 
-	mutex_lock(&io_mutex);
-	err = wm8350_read(wm8350, start_reg, regs, dest);
+	err = regmap_bulk_read(wm8350->regmap, start_reg, dest, regs);
 	if (err)
 		dev_err(wm8350->dev, "block read starting from R%d failed\n",
 			start_reg);
-	mutex_unlock(&io_mutex);
+
 	return err;
 }
 EXPORT_SYMBOL_GPL(wm8350_block_read);
@@ -273,12 +121,11 @@ int wm8350_block_write(struct wm8350 *wm8350, int start_reg, int regs,
 {
 	int ret = 0;
 
-	mutex_lock(&io_mutex);
-	ret = wm8350_write(wm8350, start_reg, regs, src);
+	ret = regmap_bulk_write(wm8350->regmap, start_reg, src, regs);
 	if (ret)
 		dev_err(wm8350->dev, "block write starting at R%d failed\n",
 			start_reg);
-	mutex_unlock(&io_mutex);
+
 	return ret;
 }
 EXPORT_SYMBOL_GPL(wm8350_block_write);
@@ -402,146 +249,6 @@ static irqreturn_t wm8350_auxadc_irq(int irq, void *irq_data)
 }
 
 /*
- * Cache is always host endian.
- */
-static int wm8350_create_cache(struct wm8350 *wm8350, int type, int mode)
-{
-	int i, ret = 0;
-	u16 value;
-	const u16 *reg_map;
-
-	switch (type) {
-	case 0:
-		switch (mode) {
-#ifdef CONFIG_MFD_WM8350_CONFIG_MODE_0
-		case 0:
-			reg_map = wm8350_mode0_defaults;
-			break;
-#endif
-#ifdef CONFIG_MFD_WM8350_CONFIG_MODE_1
-		case 1:
-			reg_map = wm8350_mode1_defaults;
-			break;
-#endif
-#ifdef CONFIG_MFD_WM8350_CONFIG_MODE_2
-		case 2:
-			reg_map = wm8350_mode2_defaults;
-			break;
-#endif
-#ifdef CONFIG_MFD_WM8350_CONFIG_MODE_3
-		case 3:
-			reg_map = wm8350_mode3_defaults;
-			break;
-#endif
-		default:
-			dev_err(wm8350->dev,
-				"WM8350 configuration mode %d not supported\n",
-				mode);
-			return -EINVAL;
-		}
-		break;
-
-	case 1:
-		switch (mode) {
-#ifdef CONFIG_MFD_WM8351_CONFIG_MODE_0
-		case 0:
-			reg_map = wm8351_mode0_defaults;
-			break;
-#endif
-#ifdef CONFIG_MFD_WM8351_CONFIG_MODE_1
-		case 1:
-			reg_map = wm8351_mode1_defaults;
-			break;
-#endif
-#ifdef CONFIG_MFD_WM8351_CONFIG_MODE_2
-		case 2:
-			reg_map = wm8351_mode2_defaults;
-			break;
-#endif
-#ifdef CONFIG_MFD_WM8351_CONFIG_MODE_3
-		case 3:
-			reg_map = wm8351_mode3_defaults;
-			break;
-#endif
-		default:
-			dev_err(wm8350->dev,
-				"WM8351 configuration mode %d not supported\n",
-				mode);
-			return -EINVAL;
-		}
-		break;
-
-	case 2:
-		switch (mode) {
-#ifdef CONFIG_MFD_WM8352_CONFIG_MODE_0
-		case 0:
-			reg_map = wm8352_mode0_defaults;
-			break;
-#endif
-#ifdef CONFIG_MFD_WM8352_CONFIG_MODE_1
-		case 1:
-			reg_map = wm8352_mode1_defaults;
-			break;
-#endif
-#ifdef CONFIG_MFD_WM8352_CONFIG_MODE_2
-		case 2:
-			reg_map = wm8352_mode2_defaults;
-			break;
-#endif
-#ifdef CONFIG_MFD_WM8352_CONFIG_MODE_3
-		case 3:
-			reg_map = wm8352_mode3_defaults;
-			break;
-#endif
-		default:
-			dev_err(wm8350->dev,
-				"WM8352 configuration mode %d not supported\n",
-				mode);
-			return -EINVAL;
-		}
-		break;
-
-	default:
-		dev_err(wm8350->dev,
-			"WM835x configuration mode %d not supported\n",
-			mode);
-		return -EINVAL;
-	}
-
-	wm8350->reg_cache =
-		kmalloc(sizeof(u16) * (WM8350_MAX_REGISTER + 1), GFP_KERNEL);
-	if (wm8350->reg_cache == NULL)
-		return -ENOMEM;
-
-	/* Read the initial cache state back from the device - this is
-	 * a PMIC so the device many not be in a virgin state and we
-	 * can't rely on the silicon values.
-	 */
-	ret = regmap_raw_read(wm8350->regmap, 0, wm8350->reg_cache,
-			      sizeof(u16) * (WM8350_MAX_REGISTER + 1));
-	if (ret < 0) {
-		dev_err(wm8350->dev,
-			"failed to read initial cache values\n");
-		goto out;
-	}
-
-	/* Mask out uncacheable/unreadable bits and the audio. */
-	for (i = 0; i < WM8350_MAX_REGISTER; i++) {
-		if (wm8350_reg_io_map[i].readable &&
-		    (i < WM8350_CLOCK_CONTROL_1 || i > WM8350_AIF_TEST)) {
-			value = be16_to_cpu(wm8350->reg_cache[i]);
-			value &= wm8350_reg_io_map[i].readable;
-			wm8350->reg_cache[i] = value;
-		} else
-			wm8350->reg_cache[i] = reg_map[i];
-	}
-
-out:
-	kfree(wm8350->reg_cache);
-	return ret;
-}
-
-/*
  * Register a client device.  This is non-fatal since there is no need to
  * fail the entire device init due to a single platform device failing.
  */
@@ -688,18 +395,12 @@ int wm8350_device_init(struct wm8350 *wm8350, int irq,
 		goto err;
 	}
 
-	ret = wm8350_create_cache(wm8350, mask_rev, mode);
-	if (ret < 0) {
-		dev_err(wm8350->dev, "Failed to create register cache\n");
-		return ret;
-	}
-
 	mutex_init(&wm8350->auxadc_mutex);
 	init_completion(&wm8350->auxadc_done);
 
 	ret = wm8350_irq_init(wm8350, irq, pdata);
 	if (ret < 0)
-		goto err_free;
+		goto err;
 
 	if (wm8350->irq_base) {
 		ret = request_threaded_irq(wm8350->irq_base +
@@ -737,8 +438,6 @@ int wm8350_device_init(struct wm8350 *wm8350, int irq,
 
 err_irq:
 	wm8350_irq_exit(wm8350);
-err_free:
-	kfree(wm8350->reg_cache);
 err:
 	return ret;
 }
@@ -765,8 +464,6 @@ void wm8350_device_exit(struct wm8350 *wm8350)
 		free_irq(wm8350->irq_base + WM8350_IRQ_AUXADC_DATARDY, wm8350);
 
 	wm8350_irq_exit(wm8350);
-
-	kfree(wm8350->reg_cache);
 }
 EXPORT_SYMBOL_GPL(wm8350_device_exit);