Merge branch 'platforms' of git://git.linaro.org/people/rmk/linux-arm

Pull ARM platform updates from Russell King:
 "This covers platform stuff for platforms I have a direct interest in
  (iow, I have the hardware).  Essentially:
   - as we no longer support any other Acorn platforms other than RiscPC
     anymore, we can collect all that code into mach-rpc.
   - convert Acorn expansion card stuff to use IRQ allocation functions,
     and get rid of NO_IRQ from there.
   - cleanups to the ebsa110 platform to move some private stuff out of
     its header files.
   - large amount of SA11x0 updates:
   - conversion of private DMA implementation to DMA engine support
     (this actually gives us greater flexibility in drivers over the old
     API.)
   - re-worked ucb1x00 updates - convert to genirq, remove sa11x0
     dependencies, fix various minor issues
   - move platform specific sa11x0 framebuffer data into platform files
     in arch/arm instead of keeping this in the driver itself
   - update sa11x0 IrDA driver for DMA engine, and allow it to use DMA
     for SIR transmissions as well as FIR
   - rework sa1111 support for genirq, and irq allocation
   - fix sa1111 IRQ support so it works again
   - use sparse IRQ support

  After this, I have one more pull request remaining from my current
  set, which I think is going to be the most problematical as it
  generates 8 conflicts."

Fixed up the trivial conflict in arch/arm/mach-rpc/Makefile as per
Russell.

* 'platforms' of git://git.linaro.org/people/rmk/linux-arm: (125 commits)
  ARM: 7343/1: sa11x0: convert to sparse IRQ
  ARM: 7342/2: sa1100: prepare for sparse irq conversion
  ARM: 7341/1: input: prepare jornada720 keyboard and ts for sa11x0 sparse irq
  ARM: 7340/1: rtc: sa1100: include mach/irqs.h instead of asm/irq.h
  ARM: sa11x0: remove unused DMA controller definitions
  ARM: sa11x0: remove old SoC private DMA driver
  USB: sa1111: add hcd .reset method
  USB: sa1111: add OHCI shutdown methods
  USB: sa1111: reorganize ohci-sa1111.c
  USB: sa1111: get rid of nasty printk(KERN_DEBUG "%s: ...", __FILE__)
  USB: sa1111: sparse and checkpatch cleanups
  ARM: sa11x0: don't static map sa1111
  ARM: sa1111: use dev_err() rather than printk()
  ARM: sa1111: cleanup sub-device registration and unregistration
  ARM: sa1111: only setup DMA for DMA capable devices
  ARM: sa1111: register sa1111 devices with dmabounce in bus notifier
  ARM: sa1111: move USB interface register definitions to ohci-sa1111.c
  ARM: sa1111: move PCMCIA interface register definitions to sa1111_generic.c
  ARM: sa1111: move PS/2 interface register definitions to sa1111p2.c
  ARM: sa1111: delete unused physical GPIO register definitions
  ...

6 files changed, 447 insertions, 323 deletions

diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 1489c3540f9..243e0c663c3 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -848,8 +848,9 @@ config MCP_SA11X0
 
 # Chip drivers
 config MCP_UCB1200
-	tristate "Support for UCB1200 / UCB1300"
-	depends on MCP
+	bool "Support for UCB1200 / UCB1300"
+	depends on MCP_SA11X0
+	select MCP
 
 config MCP_UCB1200_TS
 	tristate "Touchscreen interface support"
diff --git a/drivers/mfd/mcp-core.c b/drivers/mfd/mcp-core.c
index 86cc3f7841c..6acf2e03f2b 100644
--- a/drivers/mfd/mcp-core.c
+++ b/drivers/mfd/mcp-core.c
@@ -19,7 +19,6 @@
 #include <linux/string.h>
 #include <linux/mfd/mcp.h>
 
-#include <mach/dma.h>
 #include <asm/system.h>
 
 
@@ -48,39 +47,11 @@ static int mcp_bus_remove(struct device *dev)
 	return 0;
 }
 
-static int mcp_bus_suspend(struct device *dev, pm_message_t state)
-{
-	struct mcp *mcp = to_mcp(dev);
-	int ret = 0;
-
-	if (dev->driver) {
-		struct mcp_driver *drv = to_mcp_driver(dev->driver);
-
-		ret = drv->suspend(mcp, state);
-	}
-	return ret;
-}
-
-static int mcp_bus_resume(struct device *dev)
-{
-	struct mcp *mcp = to_mcp(dev);
-	int ret = 0;
-
-	if (dev->driver) {
-		struct mcp_driver *drv = to_mcp_driver(dev->driver);
-
-		ret = drv->resume(mcp);
-	}
-	return ret;
-}
-
 static struct bus_type mcp_bus_type = {
 	.name		= "mcp",
 	.match		= mcp_bus_match,
 	.probe		= mcp_bus_probe,
 	.remove		= mcp_bus_remove,
-	.suspend	= mcp_bus_suspend,
-	.resume		= mcp_bus_resume,
 };
 
 /**
@@ -208,6 +179,7 @@ struct mcp *mcp_host_alloc(struct device *parent, size_t size)
 	mcp = kzalloc(sizeof(struct mcp) + size, GFP_KERNEL);
 	if (mcp) {
 		spin_lock_init(&mcp->lock);
+		device_initialize(&mcp->attached_device);
 		mcp->attached_device.parent = parent;
 		mcp->attached_device.bus = &mcp_bus_type;
 		mcp->attached_device.dma_mask = parent->dma_mask;
@@ -217,18 +189,25 @@ struct mcp *mcp_host_alloc(struct device *parent, size_t size)
 }
 EXPORT_SYMBOL(mcp_host_alloc);
 
-int mcp_host_register(struct mcp *mcp)
+int mcp_host_add(struct mcp *mcp, void *pdata)
 {
+	mcp->attached_device.platform_data = pdata;
 	dev_set_name(&mcp->attached_device, "mcp0");
-	return device_register(&mcp->attached_device);
+	return device_add(&mcp->attached_device);
+}
+EXPORT_SYMBOL(mcp_host_add);
+
+void mcp_host_del(struct mcp *mcp)
+{
+	device_del(&mcp->attached_device);
 }
-EXPORT_SYMBOL(mcp_host_register);
+EXPORT_SYMBOL(mcp_host_del);
 
-void mcp_host_unregister(struct mcp *mcp)
+void mcp_host_free(struct mcp *mcp)
 {
-	device_unregister(&mcp->attached_device);
+	put_device(&mcp->attached_device);
 }
-EXPORT_SYMBOL(mcp_host_unregister);
+EXPORT_SYMBOL(mcp_host_free);
 
 int mcp_driver_register(struct mcp_driver *mcpdrv)
 {
diff --git a/drivers/mfd/mcp-sa11x0.c b/drivers/mfd/mcp-sa11x0.c
index 02c53a0766c..1c0ceacaa1f 100644
--- a/drivers/mfd/mcp-sa11x0.c
+++ b/drivers/mfd/mcp-sa11x0.c
@@ -13,51 +13,61 @@
  */
 #include <linux/module.h>
 #include <linux/init.h>
+#include <linux/io.h>
 #include <linux/errno.h>
 #include <linux/kernel.h>
 #include <linux/delay.h>
 #include <linux/spinlock.h>
 #include <linux/platform_device.h>
+#include <linux/pm.h>
 #include <linux/mfd/mcp.h>
 
-#include <mach/dma.h>
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/system.h>
 #include <mach/mcp.h>
 
-#include <mach/assabet.h>
-
+#define DRIVER_NAME "sa11x0-mcp"
 
 struct mcp_sa11x0 {
-	u32	mccr0;
-	u32	mccr1;
+	void __iomem	*base0;
+	void __iomem	*base1;
+	u32		mccr0;
+	u32		mccr1;
 };
 
+/* Register offsets */
+#define MCCR0(m)	((m)->base0 + 0x00)
+#define MCDR0(m)	((m)->base0 + 0x08)
+#define MCDR1(m)	((m)->base0 + 0x0c)
+#define MCDR2(m)	((m)->base0 + 0x10)
+#define MCSR(m)		((m)->base0 + 0x18)
+#define MCCR1(m)	((m)->base1 + 0x00)
+
 #define priv(mcp)	((struct mcp_sa11x0 *)mcp_priv(mcp))
 
 static void
 mcp_sa11x0_set_telecom_divisor(struct mcp *mcp, unsigned int divisor)
 {
-	unsigned int mccr0;
+	struct mcp_sa11x0 *m = priv(mcp);
 
 	divisor /= 32;
 
-	mccr0 = Ser4MCCR0 & ~0x00007f00;
-	mccr0 |= divisor << 8;
-	Ser4MCCR0 = mccr0;
+	m->mccr0 &= ~0x00007f00;
+	m->mccr0 |= divisor << 8;
+	writel_relaxed(m->mccr0, MCCR0(m));
 }
 
 static void
 mcp_sa11x0_set_audio_divisor(struct mcp *mcp, unsigned int divisor)
 {
-	unsigned int mccr0;
+	struct mcp_sa11x0 *m = priv(mcp);
 
 	divisor /= 32;
 
-	mccr0 = Ser4MCCR0 & ~0x0000007f;
-	mccr0 |= divisor;
-	Ser4MCCR0 = mccr0;
+	m->mccr0 &= ~0x0000007f;
+	m->mccr0 |= divisor;
+	writel_relaxed(m->mccr0, MCCR0(m));
 }
 
 /*
@@ -69,14 +79,15 @@ mcp_sa11x0_set_audio_divisor(struct mcp *mcp, unsigned int divisor)
 static void
 mcp_sa11x0_write(struct mcp *mcp, unsigned int reg, unsigned int val)
 {
+	struct mcp_sa11x0 *m = priv(mcp);
 	int ret = -ETIME;
 	int i;
 
-	Ser4MCDR2 = reg << 17 | MCDR2_Wr | (val & 0xffff);
+	writel_relaxed(reg << 17 | MCDR2_Wr | (val & 0xffff), MCDR2(m));
 
 	for (i = 0; i < 2; i++) {
 		udelay(mcp->rw_timeout);
-		if (Ser4MCSR & MCSR_CWC) {
+		if (readl_relaxed(MCSR(m)) & MCSR_CWC) {
 			ret = 0;
 			break;
 		}
@@ -95,15 +106,16 @@ mcp_sa11x0_write(struct mcp *mcp, unsigned int reg, unsigned int val)
 static unsigned int
 mcp_sa11x0_read(struct mcp *mcp, unsigned int reg)
 {
+	struct mcp_sa11x0 *m = priv(mcp);
 	int ret = -ETIME;
 	int i;
 
-	Ser4MCDR2 = reg << 17 | MCDR2_Rd;
+	writel_relaxed(reg << 17 | MCDR2_Rd, MCDR2(m));
 
 	for (i = 0; i < 2; i++) {
 		udelay(mcp->rw_timeout);
-		if (Ser4MCSR & MCSR_CRC) {
-			ret = Ser4MCDR2 & 0xffff;
+		if (readl_relaxed(MCSR(m)) & MCSR_CRC) {
+			ret = readl_relaxed(MCDR2(m)) & 0xffff;
 			break;
 		}
 	}
@@ -116,13 +128,19 @@ mcp_sa11x0_read(struct mcp *mcp, unsigned int reg)
 
 static void mcp_sa11x0_enable(struct mcp *mcp)
 {
-	Ser4MCSR = -1;
-	Ser4MCCR0 |= MCCR0_MCE;
+	struct mcp_sa11x0 *m = priv(mcp);
+
+	writel(-1, MCSR(m));
+	m->mccr0 |= MCCR0_MCE;
+	writel_relaxed(m->mccr0, MCCR0(m));
 }
 
 static void mcp_sa11x0_disable(struct mcp *mcp)
 {
-	Ser4MCCR0 &= ~MCCR0_MCE;
+	struct mcp_sa11x0 *m = priv(mcp);
+
+	m->mccr0 &= ~MCCR0_MCE;
+	writel_relaxed(m->mccr0, MCCR0(m));
 }
 
 /*
@@ -137,55 +155,64 @@ static struct mcp_ops mcp_sa11x0 = {
 	.disable		= mcp_sa11x0_disable,
 };
 
-static int mcp_sa11x0_probe(struct platform_device *pdev)
+static int mcp_sa11x0_probe(struct platform_device *dev)
 {
-	struct mcp_plat_data *data = pdev->dev.platform_data;
+	struct mcp_plat_data *data = dev->dev.platform_data;
+	struct resource *mem0, *mem1;
+	struct mcp_sa11x0 *m;
 	struct mcp *mcp;
 	int ret;
 
 	if (!data)
 		return -ENODEV;
 
-	if (!request_mem_region(0x80060000, 0x60, "sa11x0-mcp"))
-		return -EBUSY;
+	mem0 = platform_get_resource(dev, IORESOURCE_MEM, 0);
+	mem1 = platform_get_resource(dev, IORESOURCE_MEM, 1);
+	if (!mem0 || !mem1)
+		return -ENXIO;
+
+	if (!request_mem_region(mem0->start, resource_size(mem0),
+				DRIVER_NAME)) {
+		ret = -EBUSY;
+		goto err_mem0;
+	}
 
-	mcp = mcp_host_alloc(&pdev->dev, sizeof(struct mcp_sa11x0));
+	if (!request_mem_region(mem1->start, resource_size(mem1),
+				DRIVER_NAME)) {
+		ret = -EBUSY;
+		goto err_mem1;
+	}
+
+	mcp = mcp_host_alloc(&dev->dev, sizeof(struct mcp_sa11x0));
 	if (!mcp) {
 		ret = -ENOMEM;
-		goto release;
+		goto err_alloc;
 	}
 
 	mcp->owner		= THIS_MODULE;
 	mcp->ops		= &mcp_sa11x0;
 	mcp->sclk_rate		= data->sclk_rate;
-	mcp->dma_audio_rd	= DMA_Ser4MCP0Rd;
-	mcp->dma_audio_wr	= DMA_Ser4MCP0Wr;
-	mcp->dma_telco_rd	= DMA_Ser4MCP1Rd;
-	mcp->dma_telco_wr	= DMA_Ser4MCP1Wr;
-	mcp->gpio_base		= data->gpio_base;
 
-	platform_set_drvdata(pdev, mcp);
+	m = priv(mcp);
+	m->mccr0 = data->mccr0 | 0x7f7f;
+	m->mccr1 = data->mccr1;
 
-	if (machine_is_assabet()) {
-		ASSABET_BCR_set(ASSABET_BCR_CODEC_RST);
+	m->base0 = ioremap(mem0->start, resource_size(mem0));
+	m->base1 = ioremap(mem1->start, resource_size(mem1));
+	if (!m->base0 || !m->base1) {
+		ret = -ENOMEM;
+		goto err_ioremap;
 	}
 
-	/*
-	 * Setup the PPC unit correctly.
-	 */
-	PPDR &= ~PPC_RXD4;
-	PPDR |= PPC_TXD4 | PPC_SCLK | PPC_SFRM;
-	PSDR |= PPC_RXD4;
-	PSDR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM);
-	PPSR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM);
+	platform_set_drvdata(dev, mcp);
 
 	/*
 	 * Initialise device.  Note that we initially
 	 * set the sampling rate to minimum.
 	 */
-	Ser4MCSR = -1;
-	Ser4MCCR1 = data->mccr1;
-	Ser4MCCR0 = data->mccr0 | 0x7f7f;
+	writel_relaxed(-1, MCSR(m));
+	writel_relaxed(m->mccr1, MCCR1(m));
+	writel_relaxed(m->mccr0, MCCR0(m));
 
 	/*
 	 * Calculate the read/write timeout (us) from the bit clock
@@ -195,62 +222,90 @@ static int mcp_sa11x0_probe(struct platform_device *pdev)
 	mcp->rw_timeout = (64 * 3 * 1000000 + mcp->sclk_rate - 1) /
 			  mcp->sclk_rate;
 
-	ret = mcp_host_register(mcp);
+	ret = mcp_host_add(mcp, data->codec_pdata);
 	if (ret == 0)
-		goto out;
+		return 0;
 
- release:
-	release_mem_region(0x80060000, 0x60);
-	platform_set_drvdata(pdev, NULL);
+	platform_set_drvdata(dev, NULL);
 
- out:
+ err_ioremap:
+	iounmap(m->base1);
+	iounmap(m->base0);
+	mcp_host_free(mcp);
+ err_alloc:
+	release_mem_region(mem1->start, resource_size(mem1));
+ err_mem1:
+	release_mem_region(mem0->start, resource_size(mem0));
+ err_mem0:
 	return ret;
 }
 
 static int mcp_sa11x0_remove(struct platform_device *dev)
 {
 	struct mcp *mcp = platform_get_drvdata(dev);
+	struct mcp_sa11x0 *m = priv(mcp);
+	struct resource *mem0, *mem1;
+
+	if (m->mccr0 & MCCR0_MCE)
+		dev_warn(&dev->dev,
+			 "device left active (missing disable call?)\n");
+
+	mem0 = platform_get_resource(dev, IORESOURCE_MEM, 0);
+	mem1 = platform_get_resource(dev, IORESOURCE_MEM, 1);
 
 	platform_set_drvdata(dev, NULL);
-	mcp_host_unregister(mcp);
-	release_mem_region(0x80060000, 0x60);
+	mcp_host_del(mcp);
+	iounmap(m->base1);
+	iounmap(m->base0);
+	mcp_host_free(mcp);
+	release_mem_region(mem1->start, resource_size(mem1));
+	release_mem_region(mem0->start, resource_size(mem0));
 
 	return 0;
 }
 
-static int mcp_sa11x0_suspend(struct platform_device *dev, pm_message_t state)
+#ifdef CONFIG_PM_SLEEP
+static int mcp_sa11x0_suspend(struct device *dev)
 {
-	struct mcp *mcp = platform_get_drvdata(dev);
+	struct mcp_sa11x0 *m = priv(dev_get_drvdata(dev));
+
+	if (m->mccr0 & MCCR0_MCE)
+		dev_warn(dev, "device left active (missing disable call?)\n");
 
-	priv(mcp)->mccr0 = Ser4MCCR0;
-	priv(mcp)->mccr1 = Ser4MCCR1;
-	Ser4MCCR0 &= ~MCCR0_MCE;
+	writel(m->mccr0 & ~MCCR0_MCE, MCCR0(m));
 
 	return 0;
 }
 
-static int mcp_sa11x0_resume(struct platform_device *dev)
+static int mcp_sa11x0_resume(struct device *dev)
 {
-	struct mcp *mcp = platform_get_drvdata(dev);
+	struct mcp_sa11x0 *m = priv(dev_get_drvdata(dev));
 
-	Ser4MCCR1 = priv(mcp)->mccr1;
-	Ser4MCCR0 = priv(mcp)->mccr0;
+	writel_relaxed(m->mccr1, MCCR1(m));
+	writel_relaxed(m->mccr0, MCCR0(m));
 
 	return 0;
 }
-
-/*
- * The driver for the SA11x0 MCP port.
- */
-MODULE_ALIAS("platform:sa11x0-mcp");
+#endif
+
+static const struct dev_pm_ops mcp_sa11x0_pm_ops = {
+#ifdef CONFIG_PM_SLEEP
+	.suspend = mcp_sa11x0_suspend,
+	.freeze = mcp_sa11x0_suspend,
+	.poweroff = mcp_sa11x0_suspend,
+	.resume_noirq = mcp_sa11x0_resume,
+	.thaw_noirq = mcp_sa11x0_resume,
+	.restore_noirq = mcp_sa11x0_resume,
+#endif
+};
 
 static struct platform_driver mcp_sa11x0_driver = {
 	.probe		= mcp_sa11x0_probe,
 	.remove		= mcp_sa11x0_remove,
-	.suspend	= mcp_sa11x0_suspend,
-	.resume		= mcp_sa11x0_resume,
 	.driver		= {
-		.name	= "sa11x0-mcp",
+		.name	= DRIVER_NAME,
+		.owner	= THIS_MODULE,
+		.pm	= &mcp_sa11x0_pm_ops,
 	},
 };
 
@@ -259,6 +314,7 @@ static struct platform_driver mcp_sa11x0_driver = {
  */
 module_platform_driver(mcp_sa11x0_driver);
 
+MODULE_ALIAS("platform:" DRIVER_NAME);
 MODULE_AUTHOR("Russell King <rmk@arm.linux.org.uk>");
 MODULE_DESCRIPTION("SA11x0 multimedia communications port driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/mfd/ucb1x00-assabet.c b/drivers/mfd/ucb1x00-assabet.c
index cea9da60850..b63c0756a66 100644
--- a/drivers/mfd/ucb1x00-assabet.c
+++ b/drivers/mfd/ucb1x00-assabet.c
@@ -11,14 +11,15 @@
  */
 #include <linux/module.h>
 #include <linux/init.h>
+#include <linux/device.h>
+#include <linux/err.h>
 #include <linux/fs.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/platform_device.h>
 #include <linux/proc_fs.h>
-#include <linux/device.h>
 #include <linux/mfd/ucb1x00.h>
 
-#include <mach/dma.h>
-
-
 #define UCB1X00_ATTR(name,input)\
 static ssize_t name##_show(struct device *dev, struct device_attribute *attr, \
 			   char *buf)	\
@@ -38,14 +39,45 @@ UCB1X00_ATTR(batt_temp, UCB_ADC_INP_AD2);
 
 static int ucb1x00_assabet_add(struct ucb1x00_dev *dev)
 {
-	device_create_file(&dev->ucb->dev, &dev_attr_vbatt);
-	device_create_file(&dev->ucb->dev, &dev_attr_vcharger);
-	device_create_file(&dev->ucb->dev, &dev_attr_batt_temp);
+	struct ucb1x00 *ucb = dev->ucb;
+	struct platform_device *pdev;
+	struct gpio_keys_platform_data keys;
+	static struct gpio_keys_button buttons[6];
+	unsigned i;
+
+	memset(buttons, 0, sizeof(buttons));
+	memset(&keys, 0, sizeof(keys));
+
+	for (i = 0; i < ARRAY_SIZE(buttons); i++) {
+		buttons[i].code = BTN_0 + i;
+		buttons[i].gpio = ucb->gpio.base + i;
+		buttons[i].type = EV_KEY;
+		buttons[i].can_disable = true;
+	}
+
+	keys.buttons = buttons;
+	keys.nbuttons = ARRAY_SIZE(buttons);
+	keys.poll_interval = 50;
+	keys.name = "ucb1x00";
+
+	pdev = platform_device_register_data(&ucb->dev, "gpio-keys", -1,
+		&keys, sizeof(keys));
+
+	device_create_file(&ucb->dev, &dev_attr_vbatt);
+	device_create_file(&ucb->dev, &dev_attr_vcharger);
+	device_create_file(&ucb->dev, &dev_attr_batt_temp);
+
+	dev->priv = pdev;
 	return 0;
 }
 
 static void ucb1x00_assabet_remove(struct ucb1x00_dev *dev)
 {
+	struct platform_device *pdev = dev->priv;
+
+	if (!IS_ERR(pdev))
+		platform_device_unregister(pdev);
+
 	device_remove_file(&dev->ucb->dev, &dev_attr_batt_temp);
 	device_remove_file(&dev->ucb->dev, &dev_attr_vcharger);
 	device_remove_file(&dev->ucb->dev, &dev_attr_vbatt);
diff --git a/drivers/mfd/ucb1x00-core.c b/drivers/mfd/ucb1x00-core.c
index febc90cdef7..70f02daeb22 100644
--- a/drivers/mfd/ucb1x00-core.c
+++ b/drivers/mfd/ucb1x00-core.c
@@ -23,14 +23,12 @@
 #include <linux/init.h>
 #include <linux/errno.h>
 #include <linux/interrupt.h>
+#include <linux/irq.h>
 #include <linux/device.h>
 #include <linux/mutex.h>
 #include <linux/mfd/ucb1x00.h>
+#include <linux/pm.h>
 #include <linux/gpio.h>
-#include <linux/semaphore.h>
-
-#include <mach/dma.h>
-#include <mach/hardware.h>
 
 static DEFINE_MUTEX(ucb1x00_mutex);
 static LIST_HEAD(ucb1x00_drivers);
@@ -102,7 +100,7 @@ void ucb1x00_io_write(struct ucb1x00 *ucb, unsigned int set, unsigned int clear)
  *	ucb1x00_enable must have been called to enable the comms
  *	before using this function.
  *
- *	This function does not take any semaphores or spinlocks.
+ *	This function does not take any mutexes or spinlocks.
  */
 unsigned int ucb1x00_io_read(struct ucb1x00 *ucb)
 {
@@ -120,14 +118,22 @@ static void ucb1x00_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
 	else
 		ucb->io_out &= ~(1 << offset);
 
+	ucb1x00_enable(ucb);
 	ucb1x00_reg_write(ucb, UCB_IO_DATA, ucb->io_out);
+	ucb1x00_disable(ucb);
 	spin_unlock_irqrestore(&ucb->io_lock, flags);
 }
 
 static int ucb1x00_gpio_get(struct gpio_chip *chip, unsigned offset)
 {
 	struct ucb1x00 *ucb = container_of(chip, struct ucb1x00, gpio);
-	return ucb1x00_reg_read(ucb, UCB_IO_DATA) & (1 << offset);
+	unsigned val;
+
+	ucb1x00_enable(ucb);
+	val = ucb1x00_reg_read(ucb, UCB_IO_DATA);
+	ucb1x00_disable(ucb);
+
+	return val & (1 << offset);
 }
 
 static int ucb1x00_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
@@ -137,7 +143,9 @@ static int ucb1x00_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
 
 	spin_lock_irqsave(&ucb->io_lock, flags);
 	ucb->io_dir &= ~(1 << offset);
+	ucb1x00_enable(ucb);
 	ucb1x00_reg_write(ucb, UCB_IO_DIR, ucb->io_dir);
+	ucb1x00_disable(ucb);
 	spin_unlock_irqrestore(&ucb->io_lock, flags);
 
 	return 0;
@@ -157,6 +165,7 @@ static int ucb1x00_gpio_direction_output(struct gpio_chip *chip, unsigned offset
 	else
 		ucb->io_out &= ~mask;
 
+	ucb1x00_enable(ucb);
 	if (old != ucb->io_out)
 		ucb1x00_reg_write(ucb, UCB_IO_DATA, ucb->io_out);
 
@@ -164,11 +173,19 @@ static int ucb1x00_gpio_direction_output(struct gpio_chip *chip, unsigned offset
 		ucb->io_dir |= mask;
 		ucb1x00_reg_write(ucb, UCB_IO_DIR, ucb->io_dir);
 	}
+	ucb1x00_disable(ucb);
 	spin_unlock_irqrestore(&ucb->io_lock, flags);
 
 	return 0;
 }
 
+static int ucb1x00_to_irq(struct gpio_chip *chip, unsigned offset)
+{
+	struct ucb1x00 *ucb = container_of(chip, struct ucb1x00, gpio);
+
+	return ucb->irq_base > 0 ? ucb->irq_base + offset : -ENXIO;
+}
+
 /*
  * UCB1300 data sheet says we must:
  *  1. enable ADC	=> 5us (including reference startup time)
@@ -186,7 +203,7 @@ static int ucb1x00_gpio_direction_output(struct gpio_chip *chip, unsigned offset
  *	Any code wishing to use the ADC converter must call this
  *	function prior to using it.
  *
- *	This function takes the ADC semaphore to prevent two or more
+ *	This function takes the ADC mutex to prevent two or more
  *	concurrent uses, and therefore may sleep.  As a result, it
  *	can only be called from process context, not interrupt
  *	context.
@@ -196,7 +213,7 @@ static int ucb1x00_gpio_direction_output(struct gpio_chip *chip, unsigned offset
  */
 void ucb1x00_adc_enable(struct ucb1x00 *ucb)
 {
-	down(&ucb->adc_sem);
+	mutex_lock(&ucb->adc_mutex);
 
 	ucb->adc_cr |= UCB_ADC_ENA;
 
@@ -218,7 +235,7 @@ void ucb1x00_adc_enable(struct ucb1x00 *ucb)
  *	complete (2 frames max without sync).
  *
  *	If called for a synchronised ADC conversion, it may sleep
- *	with the ADC semaphore held.
+ *	with the ADC mutex held.
  */
 unsigned int ucb1x00_adc_read(struct ucb1x00 *ucb, int adc_channel, int sync)
 {
@@ -246,7 +263,7 @@ unsigned int ucb1x00_adc_read(struct ucb1x00 *ucb, int adc_channel, int sync)
  *	ucb1x00_adc_disable - disable the ADC converter
  *	@ucb: UCB1x00 structure describing chip
  *
- *	Disable the ADC converter and release the ADC semaphore.
+ *	Disable the ADC converter and release the ADC mutex.
  */
 void ucb1x00_adc_disable(struct ucb1x00 *ucb)
 {
@@ -254,7 +271,7 @@ void ucb1x00_adc_disable(struct ucb1x00 *ucb)
 	ucb1x00_reg_write(ucb, UCB_ADC_CR, ucb->adc_cr);
 	ucb1x00_disable(ucb);
 
-	up(&ucb->adc_sem);
+	mutex_unlock(&ucb->adc_mutex);
 }
 
 /*
@@ -265,10 +282,9 @@ void ucb1x00_adc_disable(struct ucb1x00 *ucb)
  * SIBCLK to talk to the chip.  We leave the clock running until
  * we have finished processing all interrupts from the chip.
  */
-static irqreturn_t ucb1x00_irq(int irqnr, void *devid)
+static void ucb1x00_irq(unsigned int irq, struct irq_desc *desc)
 {
-	struct ucb1x00 *ucb = devid;
-	struct ucb1x00_irq *irq;
+	struct ucb1x00 *ucb = irq_desc_get_handler_data(desc);
 	unsigned int isr, i;
 
 	ucb1x00_enable(ucb);
@@ -276,157 +292,104 @@ static irqreturn_t ucb1x00_irq(int irqnr, void *devid)
 	ucb1x00_reg_write(ucb, UCB_IE_CLEAR, isr);
 	ucb1x00_reg_write(ucb, UCB_IE_CLEAR, 0);
 
-	for (i = 0, irq = ucb->irq_handler; i < 16 && isr; i++, isr >>= 1, irq++)
-		if (isr & 1 && irq->fn)
-			irq->fn(i, irq->devid);
+	for (i = 0; i < 16 && isr; i++, isr >>= 1, irq++)
+		if (isr & 1)
+			generic_handle_irq(ucb->irq_base + i);
 	ucb1x00_disable(ucb);
-
-	return IRQ_HANDLED;
 }
 
-/**
- *	ucb1x00_hook_irq - hook a UCB1x00 interrupt
- *	@ucb:   UCB1x00 structure describing chip
- *	@idx:   interrupt index
- *	@fn:    function to call when interrupt is triggered
- *	@devid: device id to pass to interrupt handler
- *
- *	Hook the specified interrupt.  You can only register one handler
- *	for each interrupt source.  The interrupt source is not enabled
- *	by this function; use ucb1x00_enable_irq instead.
- *
- *	Interrupt handlers will be called with other interrupts enabled.
- *
- *	Returns zero on success, or one of the following errors:
- *	 -EINVAL if the interrupt index is invalid
- *	 -EBUSY if the interrupt has already been hooked
- */
-int ucb1x00_hook_irq(struct ucb1x00 *ucb, unsigned int idx, void (*fn)(int, void *), void *devid)
+static void ucb1x00_irq_update(struct ucb1x00 *ucb, unsigned mask)
 {
-	struct ucb1x00_irq *irq;
-	int ret = -EINVAL;
-
-	if (idx < 16) {
-		irq = ucb->irq_handler + idx;
-		ret = -EBUSY;
-
-		spin_lock_irq(&ucb->lock);
-		if (irq->fn == NULL) {
-			irq->devid = devid;
-			irq->fn = fn;
-			ret = 0;
-		}
-		spin_unlock_irq(&ucb->lock);
-	}
-	return ret;
+	ucb1x00_enable(ucb);
+	if (ucb->irq_ris_enbl & mask)
+		ucb1x00_reg_write(ucb, UCB_IE_RIS, ucb->irq_ris_enbl &
+				  ucb->irq_mask);
+	if (ucb->irq_fal_enbl & mask)
+		ucb1x00_reg_write(ucb, UCB_IE_FAL, ucb->irq_fal_enbl &
+				  ucb->irq_mask);
+	ucb1x00_disable(ucb);
 }
 
-/**
- *	ucb1x00_enable_irq - enable an UCB1x00 interrupt source
- *	@ucb: UCB1x00 structure describing chip
- *	@idx: interrupt index
- *	@edges: interrupt edges to enable
- *
- *	Enable the specified interrupt to trigger on %UCB_RISING,
- *	%UCB_FALLING or both edges.  The interrupt should have been
- *	hooked by ucb1x00_hook_irq.
- */
-void ucb1x00_enable_irq(struct ucb1x00 *ucb, unsigned int idx, int edges)
+static void ucb1x00_irq_noop(struct irq_data *data)
 {
-	unsigned long flags;
+}
 
-	if (idx < 16) {
-		spin_lock_irqsave(&ucb->lock, flags);
+static void ucb1x00_irq_mask(struct irq_data *data)
+{
+	struct ucb1x00 *ucb = irq_data_get_irq_chip_data(data);
+	unsigned mask = 1 << (data->irq - ucb->irq_base);
 
-		ucb1x00_enable(ucb);
-		if (edges & UCB_RISING) {
-			ucb->irq_ris_enbl |= 1 << idx;
-			ucb1x00_reg_write(ucb, UCB_IE_RIS, ucb->irq_ris_enbl);
-		}
-		if (edges & UCB_FALLING) {
-			ucb->irq_fal_enbl |= 1 << idx;
-			ucb1x00_reg_write(ucb, UCB_IE_FAL, ucb->irq_fal_enbl);
-		}
-		ucb1x00_disable(ucb);
-		spin_unlock_irqrestore(&ucb->lock, flags);
-	}
+	raw_spin_lock(&ucb->irq_lock);
+	ucb->irq_mask &= ~mask;
+	ucb1x00_irq_update(ucb, mask);
+	raw_spin_unlock(&ucb->irq_lock);
 }
 
-/**
- *	ucb1x00_disable_irq - disable an UCB1x00 interrupt source
- *	@ucb: UCB1x00 structure describing chip
- *	@edges: interrupt edges to disable
- *
- *	Disable the specified interrupt triggering on the specified
- *	(%UCB_RISING, %UCB_FALLING or both) edges.
- */
-void ucb1x00_disable_irq(struct ucb1x00 *ucb, unsigned int idx, int edges)
+static void ucb1x00_irq_unmask(struct irq_data *data)
 {
-	unsigned long flags;
+	struct ucb1x00 *ucb = irq_data_get_irq_chip_data(data);
+	unsigned mask = 1 << (data->irq - ucb->irq_base);
 
-	if (idx < 16) {
-		spin_lock_irqsave(&ucb->lock, flags);
-
-		ucb1x00_enable(ucb);
-		if (edges & UCB_RISING) {
-			ucb->irq_ris_enbl &= ~(1 << idx);
-			ucb1x00_reg_write(ucb, UCB_IE_RIS, ucb->irq_ris_enbl);
-		}
-		if (edges & UCB_FALLING) {
-			ucb->irq_fal_enbl &= ~(1 << idx);
-			ucb1x00_reg_write(ucb, UCB_IE_FAL, ucb->irq_fal_enbl);
-		}
-		ucb1x00_disable(ucb);
-		spin_unlock_irqrestore(&ucb->lock, flags);
-	}
+	raw_spin_lock(&ucb->irq_lock);
+	ucb->irq_mask |= mask;
+	ucb1x00_irq_update(ucb, mask);
+	raw_spin_unlock(&ucb->irq_lock);
 }
 
-/**
- *	ucb1x00_free_irq - disable and free the specified UCB1x00 interrupt
- *	@ucb: UCB1x00 structure describing chip
- *	@idx: interrupt index
- *	@devid: device id.
- *
- *	Disable the interrupt source and remove the handler.  devid must
- *	match the devid passed when hooking the interrupt.
- *
- *	Returns zero on success, or one of the following errors:
- *	 -EINVAL if the interrupt index is invalid
- *	 -ENOENT if devid does not match
- */
-int ucb1x00_free_irq(struct ucb1x00 *ucb, unsigned int idx, void *devid)
+static int ucb1x00_irq_set_type(struct irq_data *data, unsigned int type)
 {
-	struct ucb1x00_irq *irq;
-	int ret;
+	struct ucb1x00 *ucb = irq_data_get_irq_chip_data(data);
+	unsigned mask = 1 << (data->irq - ucb->irq_base);
 
-	if (idx >= 16)
-		goto bad;
+	raw_spin_lock(&ucb->irq_lock);
+	if (type & IRQ_TYPE_EDGE_RISING)
+		ucb->irq_ris_enbl |= mask;
+	else
+		ucb->irq_ris_enbl &= ~mask;
 
-	irq = ucb->irq_handler + idx;
-	ret = -ENOENT;
+	if (type & IRQ_TYPE_EDGE_FALLING)
+		ucb->irq_fal_enbl |= mask;
+	else
+		ucb->irq_fal_enbl &= ~mask;
+	if (ucb->irq_mask & mask) {
+		ucb1x00_reg_write(ucb, UCB_IE_RIS, ucb->irq_ris_enbl &
+				  ucb->irq_mask);
+		ucb1x00_reg_write(ucb, UCB_IE_FAL, ucb->irq_fal_enbl &
+				  ucb->irq_mask);
+	}
+	raw_spin_unlock(&ucb->irq_lock);
 
-	spin_lock_irq(&ucb->lock);
-	if (irq->devid == devid) {
-		ucb->irq_ris_enbl &= ~(1 << idx);
-		ucb->irq_fal_enbl &= ~(1 << idx);
+	return 0;
+}
 
-		ucb1x00_enable(ucb);
-		ucb1x00_reg_write(ucb, UCB_IE_RIS, ucb->irq_ris_enbl);
-		ucb1x00_reg_write(ucb, UCB_IE_FAL, ucb->irq_fal_enbl);
-		ucb1x00_disable(ucb);
+static int ucb1x00_irq_set_wake(struct irq_data *data, unsigned int on)
+{
+	struct ucb1x00 *ucb = irq_data_get_irq_chip_data(data);
+	struct ucb1x00_plat_data *pdata = ucb->mcp->attached_device.platform_data;
+	unsigned mask = 1 << (data->irq - ucb->irq_base);
 
-		irq->fn = NULL;
-		irq->devid = NULL;
-		ret = 0;
-	}
-	spin_unlock_irq(&ucb->lock);
-	return ret;
+	if (!pdata || !pdata->can_wakeup)
+		return -EINVAL;
 
-bad:
-	printk(KERN_ERR "Freeing bad UCB1x00 irq %d\n", idx);
-	return -EINVAL;
+	raw_spin_lock(&ucb->irq_lock);
+	if (on)
+		ucb->irq_wake |= mask;
+	else
+		ucb->irq_wake &= ~mask;
+	raw_spin_unlock(&ucb->irq_lock);
+
+	return 0;
 }
 
+static struct irq_chip ucb1x00_irqchip = {
+	.name = "ucb1x00",
+	.irq_ack = ucb1x00_irq_noop,
+	.irq_mask = ucb1x00_irq_mask,
+	.irq_unmask = ucb1x00_irq_unmask,
+	.irq_set_type = ucb1x00_irq_set_type,
+	.irq_set_wake = ucb1x00_irq_set_wake,
+};
+
 static int ucb1x00_add_dev(struct ucb1x00 *ucb, struct ucb1x00_driver *drv)
 {
 	struct ucb1x00_dev *dev;
@@ -440,8 +403,8 @@ static int ucb1x00_add_dev(struct ucb1x00 *ucb, struct ucb1x00_driver *drv)
 		ret = drv->add(dev);
 
 		if (ret == 0) {
-			list_add(&dev->dev_node, &ucb->devs);
-			list_add(&dev->drv_node, &drv->devs);
+			list_add_tail(&dev->dev_node, &ucb->devs);
+			list_add_tail(&dev->drv_node, &drv->devs);
 		} else {
 			kfree(dev);
 		}
@@ -533,98 +496,126 @@ static struct class ucb1x00_class = {
 
 static int ucb1x00_probe(struct mcp *mcp)
 {
-	struct ucb1x00 *ucb;
+	struct ucb1x00_plat_data *pdata = mcp->attached_device.platform_data;
 	struct ucb1x00_driver *drv;
-	unsigned int id;
+	struct ucb1x00 *ucb;
+	unsigned id, i, irq_base;
 	int ret = -ENODEV;
-	int temp;
+
+	/* Tell the platform to deassert the UCB1x00 reset */
+	if (pdata && pdata->reset)
+		pdata->reset(UCB_RST_PROBE);
 
 	mcp_enable(mcp);
 	id = mcp_reg_read(mcp, UCB_ID);
+	mcp_disable(mcp);
 
 	if (id != UCB_ID_1200 && id != UCB_ID_1300 && id != UCB_ID_TC35143) {
 		printk(KERN_WARNING "UCB1x00 ID not found: %04x\n", id);
-		goto err_disable;
+		goto out;
 	}
 
 	ucb = kzalloc(sizeof(struct ucb1x00), GFP_KERNEL);
 	ret = -ENOMEM;
 	if (!ucb)
-		goto err_disable;
-
+		goto out;
 
+	device_initialize(&ucb->dev);
 	ucb->dev.class = &ucb1x00_class;
 	ucb->dev.parent = &mcp->attached_device;
 	dev_set_name(&ucb->dev, "ucb1x00");
 
-	spin_lock_init(&ucb->lock);
+	raw_spin_lock_init(&ucb->irq_lock);
 	spin_lock_init(&ucb->io_lock);
-	sema_init(&ucb->adc_sem, 1);
+	mutex_init(&ucb->adc_mutex);
 
 	ucb->id  = id;
 	ucb->mcp = mcp;
+
+	ret = device_add(&ucb->dev);
+	if (ret)
+		goto err_dev_add;
+
+	ucb1x00_enable(ucb);
 	ucb->irq = ucb1x00_detect_irq(ucb);
+	ucb1x00_disable(ucb);
 	if (ucb->irq == NO_IRQ) {
-		printk(KERN_ERR "UCB1x00: IRQ probe failed\n");
+		dev_err(&ucb->dev, "IRQ probe failed\n");
 		ret = -ENODEV;
-		goto err_free;
+		goto err_no_irq;
 	}
 
 	ucb->gpio.base = -1;
-	if (mcp->gpio_base != 0) {
+	irq_base = pdata ? pdata->irq_base : 0;
+	ucb->irq_base = irq_alloc_descs(-1, irq_base, 16, -1);
+	if (ucb->irq_base < 0) {
+		dev_err(&ucb->dev, "unable to allocate 16 irqs: %d\n",
+			ucb->irq_base);
+		goto err_irq_alloc;
+	}
+
+	for (i = 0; i < 16; i++) {
+		unsigned irq = ucb->irq_base + i;
+
+		irq_set_chip_and_handler(irq, &ucb1x00_irqchip, handle_edge_irq);
+		irq_set_chip_data(irq, ucb);
+		set_irq_flags(irq, IRQF_VALID | IRQ_NOREQUEST);
+	}
+
+	irq_set_irq_type(ucb->irq, IRQ_TYPE_EDGE_RISING);
+	irq_set_handler_data(ucb->irq, ucb);
+	irq_set_chained_handler(ucb->irq, ucb1x00_irq);
+
+	if (pdata && pdata->gpio_base) {
 		ucb->gpio.label = dev_name(&ucb->dev);
-		ucb->gpio.base = mcp->gpio_base;
+		ucb->gpio.dev = &ucb->dev;
+		ucb->gpio.owner = THIS_MODULE;
+		ucb->gpio.base = pdata->gpio_base;
 		ucb->gpio.ngpio = 10;
 		ucb->gpio.set = ucb1x00_gpio_set;
 		ucb->gpio.get = ucb1x00_gpio_get;
 		ucb->gpio.direction_input = ucb1x00_gpio_direction_input;
 		ucb->gpio.direction_output = ucb1x00_gpio_direction_output;
+		ucb->gpio.to_irq = ucb1x00_to_irq;
 		ret = gpiochip_add(&ucb->gpio);
 		if (ret)
-			goto err_free;
+			goto err_gpio_add;
 	} else
 		dev_info(&ucb->dev, "gpio_base not set so no gpiolib support");
 
-	ret = request_irq(ucb->irq, ucb1x00_irq, IRQF_TRIGGER_RISING,
-			  "UCB1x00", ucb);
-	if (ret) {
-		printk(KERN_ERR "ucb1x00: unable to grab irq%d: %d\n",
-			ucb->irq, ret);
-		goto err_gpio;
-	}
-
 	mcp_set_drvdata(mcp, ucb);
 
-	ret = device_register(&ucb->dev);
-	if (ret)
-		goto err_irq;
-
+	if (pdata)
+		device_set_wakeup_capable(&ucb->dev, pdata->can_wakeup);
 
 	INIT_LIST_HEAD(&ucb->devs);
 	mutex_lock(&ucb1x00_mutex);
-	list_add(&ucb->node, &ucb1x00_devices);
+	list_add_tail(&ucb->node, &ucb1x00_devices);
 	list_for_each_entry(drv, &ucb1x00_drivers, node) {
 		ucb1x00_add_dev(ucb, drv);
 	}
 	mutex_unlock(&ucb1x00_mutex);
 
-	goto out;
+	return ret;
 
- err_irq:
-	free_irq(ucb->irq, ucb);
- err_gpio:
-	if (ucb->gpio.base != -1)
-		temp = gpiochip_remove(&ucb->gpio);
- err_free:
-	kfree(ucb);
- err_disable:
-	mcp_disable(mcp);
+ err_gpio_add:
+	irq_set_chained_handler(ucb->irq, NULL);
+ err_irq_alloc:
+	if (ucb->irq_base > 0)
+		irq_free_descs(ucb->irq_base, 16);
+ err_no_irq:
+	device_del(&ucb->dev);
+ err_dev_add:
+	put_device(&ucb->dev);
  out:
+	if (pdata && pdata->reset)
+		pdata->reset(UCB_RST_PROBE_FAIL);
 	return ret;
 }
 
 static void ucb1x00_remove(struct mcp *mcp)
 {
+	struct ucb1x00_plat_data *pdata = mcp->attached_device.platform_data;
 	struct ucb1x00 *ucb = mcp_get_drvdata(mcp);
 	struct list_head *l, *n;
 	int ret;
@@ -643,8 +634,12 @@ static void ucb1x00_remove(struct mcp *mcp)
 			dev_err(&ucb->dev, "Can't remove gpio chip: %d\n", ret);
 	}
 
-	free_irq(ucb->irq, ucb);
+	irq_set_chained_handler(ucb->irq, NULL);
+	irq_free_descs(ucb->irq_base, 16);
 	device_unregister(&ucb->dev);
+
+	if (pdata && pdata->reset)
+		pdata->reset(UCB_RST_REMOVE);
 }
 
 int ucb1x00_register_driver(struct ucb1x00_driver *drv)
@@ -653,7 +648,7 @@ int ucb1x00_register_driver(struct ucb1x00_driver *drv)
 
 	INIT_LIST_HEAD(&drv->devs);
 	mutex_lock(&ucb1x00_mutex);
-	list_add(&drv->node, &ucb1x00_drivers);
+	list_add_tail(&drv->node, &ucb1x00_drivers);
 	list_for_each_entry(ucb, &ucb1x00_devices, node) {
 		ucb1x00_add_dev(ucb, drv);
 	}
@@ -674,44 +669,86 @@ void ucb1x00_unregister_driver(struct ucb1x00_driver *drv)
 	mutex_unlock(&ucb1x00_mutex);
 }
 
-static int ucb1x00_suspend(struct mcp *mcp, pm_message_t state)
+static int ucb1x00_suspend(struct device *dev)
 {
-	struct ucb1x00 *ucb = mcp_get_drvdata(mcp);
-	struct ucb1x00_dev *dev;
+	struct ucb1x00_plat_data *pdata = dev->platform_data;
+	struct ucb1x00 *ucb = dev_get_drvdata(dev);
+	struct ucb1x00_dev *udev;
 
 	mutex_lock(&ucb1x00_mutex);
-	list_for_each_entry(dev, &ucb->devs, dev_node) {
-		if (dev->drv->suspend)
-			dev->drv->suspend(dev, state);
+	list_for_each_entry(udev, &ucb->devs, dev_node) {
+		if (udev->drv->suspend)
+			udev->drv->suspend(udev);
 	}
 	mutex_unlock(&ucb1x00_mutex);
+
+	if (ucb->irq_wake) {
+		unsigned long flags;
+
+		raw_spin_lock_irqsave(&ucb->irq_lock, flags);
+		ucb1x00_enable(ucb);
+		ucb1x00_reg_write(ucb, UCB_IE_RIS, ucb->irq_ris_enbl &
+				  ucb->irq_wake);
+		ucb1x00_reg_write(ucb, UCB_IE_FAL, ucb->irq_fal_enbl &
+				  ucb->irq_wake);
+		ucb1x00_disable(ucb);
+		raw_spin_unlock_irqrestore(&ucb->irq_lock, flags);
+
+		enable_irq_wake(ucb->irq);
+	} else if (pdata && pdata->reset)
+		pdata->reset(UCB_RST_SUSPEND);
+
 	return 0;
 }
 
-static int ucb1x00_resume(struct mcp *mcp)
+static int ucb1x00_resume(struct device *dev)
 {
-	struct ucb1x00 *ucb = mcp_get_drvdata(mcp);
-	struct ucb1x00_dev *dev;
+	struct ucb1x00_plat_data *pdata = dev->platform_data;
+	struct ucb1x00 *ucb = dev_get_drvdata(dev);
+	struct ucb1x00_dev *udev;
+
+	if (!ucb->irq_wake && pdata && pdata->reset)
+		pdata->reset(UCB_RST_RESUME);
 
+	ucb1x00_enable(ucb);
 	ucb1x00_reg_write(ucb, UCB_IO_DATA, ucb->io_out);
 	ucb1x00_reg_write(ucb, UCB_IO_DIR, ucb->io_dir);
+
+	if (ucb->irq_wake) {
+		unsigned long flags;
+
+		raw_spin_lock_irqsave(&ucb->irq_lock, flags);
+		ucb1x00_reg_write(ucb, UCB_IE_RIS, ucb->irq_ris_enbl &
+				  ucb->irq_mask);
+		ucb1x00_reg_write(ucb, UCB_IE_FAL, ucb->irq_fal_enbl &
+				  ucb->irq_mask);
+		raw_spin_unlock_irqrestore(&ucb->irq_lock, flags);
+
+		disable_irq_wake(ucb->irq);
+	}
+	ucb1x00_disable(ucb);
+
 	mutex_lock(&ucb1x00_mutex);
-	list_for_each_entry(dev, &ucb->devs, dev_node) {
-		if (dev->drv->resume)
-			dev->drv->resume(dev);
+	list_for_each_entry(udev, &ucb->devs, dev_node) {
+		if (udev->drv->resume)
+			udev->drv->resume(udev);
 	}
 	mutex_unlock(&ucb1x00_mutex);
 	return 0;
 }
 
+static const struct dev_pm_ops ucb1x00_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(ucb1x00_suspend, ucb1x00_resume)
+};
+
 static struct mcp_driver ucb1x00_driver = {
 	.drv		= {
 		.name	= "ucb1x00",
+		.owner	= THIS_MODULE,
+		.pm	= &ucb1x00_pm_ops,
 	},
 	.probe		= ucb1x00_probe,
 	.remove		= ucb1x00_remove,
-	.suspend	= ucb1x00_suspend,
-	.resume		= ucb1x00_resume,
 };
 
 static int __init ucb1x00_init(void)
@@ -742,14 +779,10 @@ EXPORT_SYMBOL(ucb1x00_adc_enable);
 EXPORT_SYMBOL(ucb1x00_adc_read);
 EXPORT_SYMBOL(ucb1x00_adc_disable);
 
-EXPORT_SYMBOL(ucb1x00_hook_irq);
-EXPORT_SYMBOL(ucb1x00_free_irq);
-EXPORT_SYMBOL(ucb1x00_enable_irq);
-EXPORT_SYMBOL(ucb1x00_disable_irq);
-
 EXPORT_SYMBOL(ucb1x00_register_driver);
 EXPORT_SYMBOL(ucb1x00_unregister_driver);
 
+MODULE_ALIAS("mcp:ucb1x00");
 MODULE_AUTHOR("Russell King <rmk@arm.linux.org.uk>");
 MODULE_DESCRIPTION("UCB1x00 core driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/mfd/ucb1x00-ts.c b/drivers/mfd/ucb1x00-ts.c
index 63a3cbdfa3f..1e0e20c0e08 100644
--- a/drivers/mfd/ucb1x00-ts.c
+++ b/drivers/mfd/ucb1x00-ts.c
@@ -20,8 +20,9 @@
 #include <linux/module.h>
 #include <linux/moduleparam.h>
 #include <linux/init.h>
-#include <linux/smp.h>
+#include <linux/interrupt.h>
 #include <linux/sched.h>
+#include <linux/spinlock.h>
 #include <linux/completion.h>
 #include <linux/delay.h>
 #include <linux/string.h>
@@ -32,7 +33,6 @@
 #include <linux/kthread.h>
 #include <linux/mfd/ucb1x00.h>
 
-#include <mach/dma.h>
 #include <mach/collie.h>
 #include <asm/mach-types.h>
 
@@ -42,6 +42,8 @@ struct ucb1x00_ts {
 	struct input_dev	*idev;
 	struct ucb1x00		*ucb;
 
+	spinlock_t		irq_lock;
+	unsigned		irq_disabled;
 	wait_queue_head_t	irq_wait;
 	struct task_struct	*rtask;
 	u16			x_res;
@@ -238,7 +240,12 @@ static int ucb1x00_thread(void *_ts)
 		if (ucb1x00_ts_pen_down(ts)) {
 			set_current_state(TASK_INTERRUPTIBLE);
 
-			ucb1x00_enable_irq(ts->ucb, UCB_IRQ_TSPX, machine_is_collie() ? UCB_RISING : UCB_FALLING);
+			spin_lock_irq(&ts->irq_lock);
+			if (ts->irq_disabled) {
+				ts->irq_disabled = 0;
+				enable_irq(ts->ucb->irq_base + UCB_IRQ_TSPX);
+			}
+			spin_unlock_irq(&ts->irq_lock);
 			ucb1x00_disable(ts->ucb);
 
 			/*
@@ -281,23 +288,37 @@ static int ucb1x00_thread(void *_ts)
  * We only detect touch screen _touches_ with this interrupt
  * handler, and even then we just schedule our task.
  */
-static void ucb1x00_ts_irq(int idx, void *id)
+static irqreturn_t ucb1x00_ts_irq(int irq, void *id)
 {
 	struct ucb1x00_ts *ts = id;
 
-	ucb1x00_disable_irq(ts->ucb, UCB_IRQ_TSPX, UCB_FALLING);
+	spin_lock(&ts->irq_lock);
+	ts->irq_disabled = 1;
+	disable_irq_nosync(ts->ucb->irq_base + UCB_IRQ_TSPX);
+	spin_unlock(&ts->irq_lock);
 	wake_up(&ts->irq_wait);
+
+	return IRQ_HANDLED;
 }
 
 static int ucb1x00_ts_open(struct input_dev *idev)
 {
 	struct ucb1x00_ts *ts = input_get_drvdata(idev);
+	unsigned long flags = 0;
 	int ret = 0;
 
 	BUG_ON(ts->rtask);
 
+	if (machine_is_collie())
+		flags = IRQF_TRIGGER_RISING;
+	else
+		flags = IRQF_TRIGGER_FALLING;
+
+	ts->irq_disabled = 0;
+
 	init_waitqueue_head(&ts->irq_wait);
-	ret = ucb1x00_hook_irq(ts->ucb, UCB_IRQ_TSPX, ucb1x00_ts_irq, ts);
+	ret = request_irq(ts->ucb->irq_base + UCB_IRQ_TSPX, ucb1x00_ts_irq,
+			  flags, "ucb1x00-ts", ts);
 	if (ret < 0)
 		goto out;
 
@@ -314,7 +335,7 @@ static int ucb1x00_ts_open(struct input_dev *idev)
 	if (!IS_ERR(ts->rtask)) {
 		ret = 0;
 	} else {
-		ucb1x00_free_irq(ts->ucb, UCB_IRQ_TSPX, ts);
+		free_irq(ts->ucb->irq_base + UCB_IRQ_TSPX, ts);
 		ts->rtask = NULL;
 		ret = -EFAULT;
 	}
@@ -334,7 +355,7 @@ static void ucb1x00_ts_close(struct input_dev *idev)
 		kthread_stop(ts->rtask);
 
 	ucb1x00_enable(ts->ucb);
-	ucb1x00_free_irq(ts->ucb, UCB_IRQ_TSPX, ts);
+	free_irq(ts->ucb->irq_base + UCB_IRQ_TSPX, ts);
 	ucb1x00_reg_write(ts->ucb, UCB_TS_CR, 0);
 	ucb1x00_disable(ts->ucb);
 }
@@ -359,11 +380,13 @@ static int ucb1x00_ts_add(struct ucb1x00_dev *dev)
 	ts->ucb = dev->ucb;
 	ts->idev = idev;
 	ts->adcsync = adcsync ? UCB_SYNC : UCB_NOSYNC;
+	spin_lock_init(&ts->irq_lock);
 
 	idev->name       = "Touchscreen panel";
 	idev->id.product = ts->ucb->id;
 	idev->open       = ucb1x00_ts_open;
 	idev->close      = ucb1x00_ts_close;
+	idev->dev.parent = &ts->ucb->dev;
 
 	idev->evbit[0]   = BIT_MASK(EV_ABS) | BIT_MASK(EV_KEY);
 	idev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);