Merge branch 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6

* 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (172 commits)
  USB: Add support for SuperSpeed isoc endpoints
  xhci: Clean up cycle bit math used during stalls.
  xhci: Fix cycle bit calculation during stall handling.
  xhci: Update internal dequeue pointers after stalls.
  USB: Disable auto-suspend for USB 3.0 hubs.
  USB: Remove bogus USB_PORT_STAT_SUPER_SPEED symbol.
  xhci: Return canceled URBs immediately when host is halted.
  xhci: Fixes for suspend/resume of shared HCDs.
  xhci: Fix re-init on power loss after resume.
  xhci: Make roothub functions deal with device removal.
  xhci: Limit roothub ports to 15 USB3 & 31 USB2 ports.
  xhci: Return a USB 3.0 hub descriptor for USB3 roothub.
  xhci: Register second xHCI roothub.
  xhci: Change xhci_find_slot_id_by_port() API.
  xhci: Refactor bus suspend state into a struct.
  xhci: Index with a port array instead of PORTSC addresses.
  USB: Set usb_hcd->state and flags for shared roothubs.
  usb: Make core allocate resources per PCI-device.
  usb: Store bus type in usb_hcd, not in driver flags.
  usb: Change usb_hcd->bandwidth_mutex to a pointer.
  ...

3 files changed, 1071 insertions, 0 deletions

diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index fd018366d67..a6dfa37a674 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -624,6 +624,15 @@ config MFD_WL1273_CORE
 	  driver connects the radio-wl1273 V4L2 module and the wl1273
 	  audio codec.
 
+config MFD_OMAP_USB_HOST
+	bool "Support OMAP USBHS core driver"
+	depends on USB_EHCI_HCD_OMAP || USB_OHCI_HCD_OMAP3
+	default y
+	help
+	  This is the core driver for the OAMP EHCI and OHCI drivers.
+	  This MFD driver does the required setup functionalities for
+	  OMAP USB Host drivers.
+
 endif # MFD_SUPPORT
 
 menu "Multimedia Capabilities Port drivers"
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index a54e2c7c6a1..91fe384459a 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -83,3 +83,4 @@ obj-$(CONFIG_MFD_TPS6586X)	+= tps6586x.o
 obj-$(CONFIG_MFD_VX855)		+= vx855.o
 obj-$(CONFIG_MFD_WL1273_CORE)	+= wl1273-core.o
 obj-$(CONFIG_MFD_CS5535)	+= cs5535-mfd.o
+obj-$(CONFIG_MFD_OMAP_USB_HOST)	+= omap-usb-host.o
diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c
new file mode 100644
index 00000000000..cb01209754e
--- /dev/null
+++ b/drivers/mfd/omap-usb-host.c
@@ -0,0 +1,1061 @@
+/**
+ * omap-usb-host.c - The USBHS core driver for OMAP EHCI & OHCI
+ *
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com
+ * Author: Keshava Munegowda <keshava_mgowda@ti.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2  of
+ * the License as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/dma-mapping.h>
+#include <linux/spinlock.h>
+#include <linux/gpio.h>
+#include <linux/regulator/consumer.h>
+#include <plat/usb.h>
+
+#define USBHS_DRIVER_NAME	"usbhs-omap"
+#define OMAP_EHCI_DEVICE	"ehci-omap"
+#define OMAP_OHCI_DEVICE	"ohci-omap3"
+
+/* OMAP USBHOST Register addresses  */
+
+/* TLL Register Set */
+#define	OMAP_USBTLL_REVISION				(0x00)
+#define	OMAP_USBTLL_SYSCONFIG				(0x10)
+#define	OMAP_USBTLL_SYSCONFIG_CACTIVITY			(1 << 8)
+#define	OMAP_USBTLL_SYSCONFIG_SIDLEMODE			(1 << 3)
+#define	OMAP_USBTLL_SYSCONFIG_ENAWAKEUP			(1 << 2)
+#define	OMAP_USBTLL_SYSCONFIG_SOFTRESET			(1 << 1)
+#define	OMAP_USBTLL_SYSCONFIG_AUTOIDLE			(1 << 0)
+
+#define	OMAP_USBTLL_SYSSTATUS				(0x14)
+#define	OMAP_USBTLL_SYSSTATUS_RESETDONE			(1 << 0)
+
+#define	OMAP_USBTLL_IRQSTATUS				(0x18)
+#define	OMAP_USBTLL_IRQENABLE				(0x1C)
+
+#define	OMAP_TLL_SHARED_CONF				(0x30)
+#define	OMAP_TLL_SHARED_CONF_USB_90D_DDR_EN		(1 << 6)
+#define	OMAP_TLL_SHARED_CONF_USB_180D_SDR_EN		(1 << 5)
+#define	OMAP_TLL_SHARED_CONF_USB_DIVRATION		(1 << 2)
+#define	OMAP_TLL_SHARED_CONF_FCLK_REQ			(1 << 1)
+#define	OMAP_TLL_SHARED_CONF_FCLK_IS_ON			(1 << 0)
+
+#define	OMAP_TLL_CHANNEL_CONF(num)			(0x040 + 0x004 * num)
+#define OMAP_TLL_CHANNEL_CONF_FSLSMODE_SHIFT		24
+#define	OMAP_TLL_CHANNEL_CONF_ULPINOBITSTUFF		(1 << 11)
+#define	OMAP_TLL_CHANNEL_CONF_ULPI_ULPIAUTOIDLE		(1 << 10)
+#define	OMAP_TLL_CHANNEL_CONF_UTMIAUTOIDLE		(1 << 9)
+#define	OMAP_TLL_CHANNEL_CONF_ULPIDDRMODE		(1 << 8)
+#define OMAP_TLL_CHANNEL_CONF_CHANMODE_FSLS		(1 << 1)
+#define	OMAP_TLL_CHANNEL_CONF_CHANEN			(1 << 0)
+
+#define OMAP_TLL_FSLSMODE_6PIN_PHY_DAT_SE0		0x0
+#define OMAP_TLL_FSLSMODE_6PIN_PHY_DP_DM		0x1
+#define OMAP_TLL_FSLSMODE_3PIN_PHY			0x2
+#define OMAP_TLL_FSLSMODE_4PIN_PHY			0x3
+#define OMAP_TLL_FSLSMODE_6PIN_TLL_DAT_SE0		0x4
+#define OMAP_TLL_FSLSMODE_6PIN_TLL_DP_DM		0x5
+#define OMAP_TLL_FSLSMODE_3PIN_TLL			0x6
+#define OMAP_TLL_FSLSMODE_4PIN_TLL			0x7
+#define OMAP_TLL_FSLSMODE_2PIN_TLL_DAT_SE0		0xA
+#define OMAP_TLL_FSLSMODE_2PIN_DAT_DP_DM		0xB
+
+#define	OMAP_TLL_ULPI_FUNCTION_CTRL(num)		(0x804 + 0x100 * num)
+#define	OMAP_TLL_ULPI_INTERFACE_CTRL(num)		(0x807 + 0x100 * num)
+#define	OMAP_TLL_ULPI_OTG_CTRL(num)			(0x80A + 0x100 * num)
+#define	OMAP_TLL_ULPI_INT_EN_RISE(num)			(0x80D + 0x100 * num)
+#define	OMAP_TLL_ULPI_INT_EN_FALL(num)			(0x810 + 0x100 * num)
+#define	OMAP_TLL_ULPI_INT_STATUS(num)			(0x813 + 0x100 * num)
+#define	OMAP_TLL_ULPI_INT_LATCH(num)			(0x814 + 0x100 * num)
+#define	OMAP_TLL_ULPI_DEBUG(num)			(0x815 + 0x100 * num)
+#define	OMAP_TLL_ULPI_SCRATCH_REGISTER(num)		(0x816 + 0x100 * num)
+
+#define OMAP_TLL_CHANNEL_COUNT				3
+#define OMAP_TLL_CHANNEL_1_EN_MASK			(1 << 0)
+#define OMAP_TLL_CHANNEL_2_EN_MASK			(1 << 1)
+#define OMAP_TLL_CHANNEL_3_EN_MASK			(1 << 2)
+
+/* UHH Register Set */
+#define	OMAP_UHH_REVISION				(0x00)
+#define	OMAP_UHH_SYSCONFIG				(0x10)
+#define	OMAP_UHH_SYSCONFIG_MIDLEMODE			(1 << 12)
+#define	OMAP_UHH_SYSCONFIG_CACTIVITY			(1 << 8)
+#define	OMAP_UHH_SYSCONFIG_SIDLEMODE			(1 << 3)
+#define	OMAP_UHH_SYSCONFIG_ENAWAKEUP			(1 << 2)
+#define	OMAP_UHH_SYSCONFIG_SOFTRESET			(1 << 1)
+#define	OMAP_UHH_SYSCONFIG_AUTOIDLE			(1 << 0)
+
+#define	OMAP_UHH_SYSSTATUS				(0x14)
+#define	OMAP_UHH_HOSTCONFIG				(0x40)
+#define	OMAP_UHH_HOSTCONFIG_ULPI_BYPASS			(1 << 0)
+#define	OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS		(1 << 0)
+#define	OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS		(1 << 11)
+#define	OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS		(1 << 12)
+#define OMAP_UHH_HOSTCONFIG_INCR4_BURST_EN		(1 << 2)
+#define OMAP_UHH_HOSTCONFIG_INCR8_BURST_EN		(1 << 3)
+#define OMAP_UHH_HOSTCONFIG_INCR16_BURST_EN		(1 << 4)
+#define OMAP_UHH_HOSTCONFIG_INCRX_ALIGN_EN		(1 << 5)
+#define OMAP_UHH_HOSTCONFIG_P1_CONNECT_STATUS		(1 << 8)
+#define OMAP_UHH_HOSTCONFIG_P2_CONNECT_STATUS		(1 << 9)
+#define OMAP_UHH_HOSTCONFIG_P3_CONNECT_STATUS		(1 << 10)
+#define OMAP4_UHH_HOSTCONFIG_APP_START_CLK		(1 << 31)
+
+/* OMAP4-specific defines */
+#define OMAP4_UHH_SYSCONFIG_IDLEMODE_CLEAR		(3 << 2)
+#define OMAP4_UHH_SYSCONFIG_NOIDLE			(1 << 2)
+#define OMAP4_UHH_SYSCONFIG_STDBYMODE_CLEAR		(3 << 4)
+#define OMAP4_UHH_SYSCONFIG_NOSTDBY			(1 << 4)
+#define OMAP4_UHH_SYSCONFIG_SOFTRESET			(1 << 0)
+
+#define OMAP4_P1_MODE_CLEAR				(3 << 16)
+#define OMAP4_P1_MODE_TLL				(1 << 16)
+#define OMAP4_P1_MODE_HSIC				(3 << 16)
+#define OMAP4_P2_MODE_CLEAR				(3 << 18)
+#define OMAP4_P2_MODE_TLL				(1 << 18)
+#define OMAP4_P2_MODE_HSIC				(3 << 18)
+
+#define OMAP_REV2_TLL_CHANNEL_COUNT			2
+
+#define	OMAP_UHH_DEBUG_CSR				(0x44)
+
+/* Values of UHH_REVISION - Note: these are not given in the TRM */
+#define OMAP_USBHS_REV1		0x00000010	/* OMAP3 */
+#define OMAP_USBHS_REV2		0x50700100	/* OMAP4 */
+
+#define is_omap_usbhs_rev1(x)	(x->usbhs_rev == OMAP_USBHS_REV1)
+#define is_omap_usbhs_rev2(x)	(x->usbhs_rev == OMAP_USBHS_REV2)
+
+#define is_ehci_phy_mode(x)	(x == OMAP_EHCI_PORT_MODE_PHY)
+#define is_ehci_tll_mode(x)	(x == OMAP_EHCI_PORT_MODE_TLL)
+#define is_ehci_hsic_mode(x)	(x == OMAP_EHCI_PORT_MODE_HSIC)
+
+
+struct usbhs_hcd_omap {
+	struct clk			*usbhost_ick;
+	struct clk			*usbhost_hs_fck;
+	struct clk			*usbhost_fs_fck;
+	struct clk			*xclk60mhsp1_ck;
+	struct clk			*xclk60mhsp2_ck;
+	struct clk			*utmi_p1_fck;
+	struct clk			*usbhost_p1_fck;
+	struct clk			*usbtll_p1_fck;
+	struct clk			*utmi_p2_fck;
+	struct clk			*usbhost_p2_fck;
+	struct clk			*usbtll_p2_fck;
+	struct clk			*init_60m_fclk;
+	struct clk			*usbtll_fck;
+	struct clk			*usbtll_ick;
+
+	void __iomem			*uhh_base;
+	void __iomem			*tll_base;
+
+	struct usbhs_omap_platform_data	platdata;
+
+	u32				usbhs_rev;
+	spinlock_t			lock;
+	int				count;
+};
+/*-------------------------------------------------------------------------*/
+
+const char usbhs_driver_name[] = USBHS_DRIVER_NAME;
+static u64 usbhs_dmamask = ~(u32)0;
+
+/*-------------------------------------------------------------------------*/
+
+static inline void usbhs_write(void __iomem *base, u32 reg, u32 val)
+{
+	__raw_writel(val, base + reg);
+}
+
+static inline u32 usbhs_read(void __iomem *base, u32 reg)
+{
+	return __raw_readl(base + reg);
+}
+
+static inline void usbhs_writeb(void __iomem *base, u8 reg, u8 val)
+{
+	__raw_writeb(val, base + reg);
+}
+
+static inline u8 usbhs_readb(void __iomem *base, u8 reg)
+{
+	return __raw_readb(base + reg);
+}
+
+/*-------------------------------------------------------------------------*/
+
+static struct platform_device *omap_usbhs_alloc_child(const char *name,
+			struct resource	*res, int num_resources, void *pdata,
+			size_t pdata_size, struct device *dev)
+{
+	struct platform_device	*child;
+	int			ret;
+
+	child = platform_device_alloc(name, 0);
+
+	if (!child) {
+		dev_err(dev, "platform_device_alloc %s failed\n", name);
+		goto err_end;
+	}
+
+	ret = platform_device_add_resources(child, res, num_resources);
+	if (ret) {
+		dev_err(dev, "platform_device_add_resources failed\n");
+		goto err_alloc;
+	}
+
+	ret = platform_device_add_data(child, pdata, pdata_size);
+	if (ret) {
+		dev_err(dev, "platform_device_add_data failed\n");
+		goto err_alloc;
+	}
+
+	child->dev.dma_mask		= &usbhs_dmamask;
+	child->dev.coherent_dma_mask	= 0xffffffff;
+	child->dev.parent		= dev;
+
+	ret = platform_device_add(child);
+	if (ret) {
+		dev_err(dev, "platform_device_add failed\n");
+		goto err_alloc;
+	}
+
+	return child;
+
+err_alloc:
+	platform_device_put(child);
+
+err_end:
+	return NULL;
+}
+
+static int omap_usbhs_alloc_children(struct platform_device *pdev)
+{
+	struct device				*dev = &pdev->dev;
+	struct usbhs_hcd_omap			*omap;
+	struct ehci_hcd_omap_platform_data	*ehci_data;
+	struct ohci_hcd_omap_platform_data	*ohci_data;
+	struct platform_device			*ehci;
+	struct platform_device			*ohci;
+	struct resource				*res;
+	struct resource				resources[2];
+	int					ret;
+
+	omap = platform_get_drvdata(pdev);
+	ehci_data = omap->platdata.ehci_data;
+	ohci_data = omap->platdata.ohci_data;
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ehci");
+	if (!res) {
+		dev_err(dev, "EHCI get resource IORESOURCE_MEM failed\n");
+		ret = -ENODEV;
+		goto err_end;
+	}
+	resources[0] = *res;
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "ehci-irq");
+	if (!res) {
+		dev_err(dev, " EHCI get resource IORESOURCE_IRQ failed\n");
+		ret = -ENODEV;
+		goto err_end;
+	}
+	resources[1] = *res;
+
+	ehci = omap_usbhs_alloc_child(OMAP_EHCI_DEVICE, resources, 2, ehci_data,
+		sizeof(*ehci_data), dev);
+
+	if (!ehci) {
+		dev_err(dev, "omap_usbhs_alloc_child failed\n");
+		goto err_end;
+	}
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ohci");
+	if (!res) {
+		dev_err(dev, "OHCI get resource IORESOURCE_MEM failed\n");
+		ret = -ENODEV;
+		goto err_ehci;
+	}
+	resources[0] = *res;
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "ohci-irq");
+	if (!res) {
+		dev_err(dev, "OHCI get resource IORESOURCE_IRQ failed\n");
+		ret = -ENODEV;
+		goto err_ehci;
+	}
+	resources[1] = *res;
+
+	ohci = omap_usbhs_alloc_child(OMAP_OHCI_DEVICE, resources, 2, ohci_data,
+		sizeof(*ohci_data), dev);
+	if (!ohci) {
+		dev_err(dev, "omap_usbhs_alloc_child failed\n");
+		goto err_ehci;
+	}
+
+	return 0;
+
+err_ehci:
+	platform_device_put(ehci);
+
+err_end:
+	return ret;
+}
+
+/**
+ * usbhs_omap_probe - initialize TI-based HCDs
+ *
+ * Allocates basic resources for this USB host controller.
+ */
+static int __devinit usbhs_omap_probe(struct platform_device *pdev)
+{
+	struct device			*dev =  &pdev->dev;
+	struct usbhs_omap_platform_data	*pdata = dev->platform_data;
+	struct usbhs_hcd_omap		*omap;
+	struct resource			*res;
+	int				ret = 0;
+	int				i;
+
+	if (!pdata) {
+		dev_err(dev, "Missing platfrom data\n");
+		ret = -ENOMEM;
+		goto end_probe;
+	}
+
+	omap = kzalloc(sizeof(*omap), GFP_KERNEL);
+	if (!omap) {
+		dev_err(dev, "Memory allocation failed\n");
+		ret = -ENOMEM;
+		goto end_probe;
+	}
+
+	spin_lock_init(&omap->lock);
+
+	for (i = 0; i < OMAP3_HS_USB_PORTS; i++)
+		omap->platdata.port_mode[i] = pdata->port_mode[i];
+
+	omap->platdata.ehci_data = pdata->ehci_data;
+	omap->platdata.ohci_data = pdata->ohci_data;
+
+	omap->usbhost_ick = clk_get(dev, "usbhost_ick");
+	if (IS_ERR(omap->usbhost_ick)) {
+		ret =  PTR_ERR(omap->usbhost_ick);
+		dev_err(dev, "usbhost_ick failed error:%d\n", ret);
+		goto err_end;
+	}
+
+	omap->usbhost_hs_fck = clk_get(dev, "hs_fck");
+	if (IS_ERR(omap->usbhost_hs_fck)) {
+		ret = PTR_ERR(omap->usbhost_hs_fck);
+		dev_err(dev, "usbhost_hs_fck failed error:%d\n", ret);
+		goto err_usbhost_ick;
+	}
+
+	omap->usbhost_fs_fck = clk_get(dev, "fs_fck");
+	if (IS_ERR(omap->usbhost_fs_fck)) {
+		ret = PTR_ERR(omap->usbhost_fs_fck);
+		dev_err(dev, "usbhost_fs_fck failed error:%d\n", ret);
+		goto err_usbhost_hs_fck;
+	}
+
+	omap->usbtll_fck = clk_get(dev, "usbtll_fck");
+	if (IS_ERR(omap->usbtll_fck)) {
+		ret = PTR_ERR(omap->usbtll_fck);
+		dev_err(dev, "usbtll_fck failed error:%d\n", ret);
+		goto err_usbhost_fs_fck;
+	}
+
+	omap->usbtll_ick = clk_get(dev, "usbtll_ick");
+	if (IS_ERR(omap->usbtll_ick)) {
+		ret = PTR_ERR(omap->usbtll_ick);
+		dev_err(dev, "usbtll_ick failed error:%d\n", ret);
+		goto err_usbtll_fck;
+	}
+
+	omap->utmi_p1_fck = clk_get(dev, "utmi_p1_gfclk");
+	if (IS_ERR(omap->utmi_p1_fck)) {
+		ret = PTR_ERR(omap->utmi_p1_fck);
+		dev_err(dev, "utmi_p1_gfclk failed error:%d\n",	ret);
+		goto err_usbtll_ick;
+	}
+
+	omap->xclk60mhsp1_ck = clk_get(dev, "xclk60mhsp1_ck");
+	if (IS_ERR(omap->xclk60mhsp1_ck)) {
+		ret = PTR_ERR(omap->xclk60mhsp1_ck);
+		dev_err(dev, "xclk60mhsp1_ck failed error:%d\n", ret);
+		goto err_utmi_p1_fck;
+	}
+
+	omap->utmi_p2_fck = clk_get(dev, "utmi_p2_gfclk");
+	if (IS_ERR(omap->utmi_p2_fck)) {
+		ret = PTR_ERR(omap->utmi_p2_fck);
+		dev_err(dev, "utmi_p2_gfclk failed error:%d\n", ret);
+		goto err_xclk60mhsp1_ck;
+	}
+
+	omap->xclk60mhsp2_ck = clk_get(dev, "xclk60mhsp2_ck");
+	if (IS_ERR(omap->xclk60mhsp2_ck)) {
+		ret = PTR_ERR(omap->xclk60mhsp2_ck);
+		dev_err(dev, "xclk60mhsp2_ck failed error:%d\n", ret);
+		goto err_utmi_p2_fck;
+	}
+
+	omap->usbhost_p1_fck = clk_get(dev, "usb_host_hs_utmi_p1_clk");
+	if (IS_ERR(omap->usbhost_p1_fck)) {
+		ret = PTR_ERR(omap->usbhost_p1_fck);
+		dev_err(dev, "usbhost_p1_fck failed error:%d\n", ret);
+		goto err_xclk60mhsp2_ck;
+	}
+
+	omap->usbtll_p1_fck = clk_get(dev, "usb_tll_hs_usb_ch0_clk");
+	if (IS_ERR(omap->usbtll_p1_fck)) {
+		ret = PTR_ERR(omap->usbtll_p1_fck);
+		dev_err(dev, "usbtll_p1_fck failed error:%d\n", ret);
+		goto err_usbhost_p1_fck;
+	}
+
+	omap->usbhost_p2_fck = clk_get(dev, "usb_host_hs_utmi_p2_clk");
+	if (IS_ERR(omap->usbhost_p2_fck)) {
+		ret = PTR_ERR(omap->usbhost_p2_fck);
+		dev_err(dev, "usbhost_p2_fck failed error:%d\n", ret);
+		goto err_usbtll_p1_fck;
+	}
+
+	omap->usbtll_p2_fck = clk_get(dev, "usb_tll_hs_usb_ch1_clk");
+	if (IS_ERR(omap->usbtll_p2_fck)) {
+		ret = PTR_ERR(omap->usbtll_p2_fck);
+		dev_err(dev, "usbtll_p2_fck failed error:%d\n", ret);
+		goto err_usbhost_p2_fck;
+	}
+
+	omap->init_60m_fclk = clk_get(dev, "init_60m_fclk");
+	if (IS_ERR(omap->init_60m_fclk)) {
+		ret = PTR_ERR(omap->init_60m_fclk);
+		dev_err(dev, "init_60m_fclk failed error:%d\n", ret);
+		goto err_usbtll_p2_fck;
+	}
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "uhh");
+	if (!res) {
+		dev_err(dev, "UHH EHCI get resource failed\n");
+		ret = -ENODEV;
+		goto err_init_60m_fclk;
+	}
+
+	omap->uhh_base = ioremap(res->start, resource_size(res));
+	if (!omap->uhh_base) {
+		dev_err(dev, "UHH ioremap failed\n");
+		ret = -ENOMEM;
+		goto err_init_60m_fclk;
+	}
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "tll");
+	if (!res) {
+		dev_err(dev, "UHH EHCI get resource failed\n");
+		ret = -ENODEV;
+		goto err_tll;
+	}
+
+	omap->tll_base = ioremap(res->start, resource_size(res));
+	if (!omap->tll_base) {
+		dev_err(dev, "TLL ioremap failed\n");
+		ret = -ENOMEM;
+		goto err_tll;
+	}
+
+	platform_set_drvdata(pdev, omap);
+
+	ret = omap_usbhs_alloc_children(pdev);
+	if (ret) {
+		dev_err(dev, "omap_usbhs_alloc_children failed\n");
+		goto err_alloc;
+	}
+
+	goto end_probe;
+
+err_alloc:
+	iounmap(omap->tll_base);
+
+err_tll:
+	iounmap(omap->uhh_base);
+
+err_init_60m_fclk:
+	clk_put(omap->init_60m_fclk);
+
+err_usbtll_p2_fck:
+	clk_put(omap->usbtll_p2_fck);
+
+err_usbhost_p2_fck:
+	clk_put(omap->usbhost_p2_fck);
+
+err_usbtll_p1_fck:
+	clk_put(omap->usbtll_p1_fck);
+
+err_usbhost_p1_fck:
+	clk_put(omap->usbhost_p1_fck);
+
+err_xclk60mhsp2_ck:
+	clk_put(omap->xclk60mhsp2_ck);
+
+err_utmi_p2_fck:
+	clk_put(omap->utmi_p2_fck);
+
+err_xclk60mhsp1_ck:
+	clk_put(omap->xclk60mhsp1_ck);
+
+err_utmi_p1_fck:
+	clk_put(omap->utmi_p1_fck);
+
+err_usbtll_ick:
+	clk_put(omap->usbtll_ick);
+
+err_usbtll_fck:
+	clk_put(omap->usbtll_fck);
+
+err_usbhost_fs_fck:
+	clk_put(omap->usbhost_fs_fck);
+
+err_usbhost_hs_fck:
+	clk_put(omap->usbhost_hs_fck);
+
+err_usbhost_ick:
+	clk_put(omap->usbhost_ick);
+
+err_end:
+	kfree(omap);
+
+end_probe:
+	return ret;
+}
+
+/**
+ * usbhs_omap_remove - shutdown processing for UHH & TLL HCDs
+ * @pdev: USB Host Controller being removed
+ *
+ * Reverses the effect of usbhs_omap_probe().
+ */
+static int __devexit usbhs_omap_remove(struct platform_device *pdev)
+{
+	struct usbhs_hcd_omap *omap = platform_get_drvdata(pdev);
+
+	if (omap->count != 0) {
+		dev_err(&pdev->dev,
+			"Either EHCI or OHCI is still using usbhs core\n");
+		return -EBUSY;
+	}
+
+	iounmap(omap->tll_base);
+	iounmap(omap->uhh_base);
+	clk_put(omap->init_60m_fclk);
+	clk_put(omap->usbtll_p2_fck);
+	clk_put(omap->usbhost_p2_fck);
+	clk_put(omap->usbtll_p1_fck);
+	clk_put(omap->usbhost_p1_fck);
+	clk_put(omap->xclk60mhsp2_ck);
+	clk_put(omap->utmi_p2_fck);
+	clk_put(omap->xclk60mhsp1_ck);
+	clk_put(omap->utmi_p1_fck);
+	clk_put(omap->usbtll_ick);
+	clk_put(omap->usbtll_fck);
+	clk_put(omap->usbhost_fs_fck);
+	clk_put(omap->usbhost_hs_fck);
+	clk_put(omap->usbhost_ick);
+	kfree(omap);
+
+	return 0;
+}
+
+static bool is_ohci_port(enum usbhs_omap_port_mode pmode)
+{
+	switch (pmode) {
+	case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0:
+	case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM:
+	case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0:
+	case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM:
+	case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0:
+	case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM:
+	case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0:
+	case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM:
+	case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0:
+	case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM:
+		return true;
+
+	default:
+		return false;
+	}
+}
+
+/*
+ * convert the port-mode enum to a value we can use in the FSLSMODE
+ * field of USBTLL_CHANNEL_CONF
+ */
+static unsigned ohci_omap3_fslsmode(enum usbhs_omap_port_mode mode)
+{
+	switch (mode) {
+	case OMAP_USBHS_PORT_MODE_UNUSED:
+	case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0:
+		return OMAP_TLL_FSLSMODE_6PIN_PHY_DAT_SE0;
+
+	case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM:
+		return OMAP_TLL_FSLSMODE_6PIN_PHY_DP_DM;
+
+	case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0:
+		return OMAP_TLL_FSLSMODE_3PIN_PHY;
+
+	case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM:
+		return OMAP_TLL_FSLSMODE_4PIN_PHY;
+
+	case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0:
+		return OMAP_TLL_FSLSMODE_6PIN_TLL_DAT_SE0;
+
+	case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM:
+		return OMAP_TLL_FSLSMODE_6PIN_TLL_DP_DM;
+
+	case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0:
+		return OMAP_TLL_FSLSMODE_3PIN_TLL;
+
+	case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM:
+		return OMAP_TLL_FSLSMODE_4PIN_TLL;
+
+	case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0:
+		return OMAP_TLL_FSLSMODE_2PIN_TLL_DAT_SE0;
+
+	case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM:
+		return OMAP_TLL_FSLSMODE_2PIN_DAT_DP_DM;
+	default:
+		pr_warning("Invalid port mode, using default\n");
+		return OMAP_TLL_FSLSMODE_6PIN_PHY_DAT_SE0;
+	}
+}
+
+static void usbhs_omap_tll_init(struct device *dev, u8 tll_channel_count)
+{
+	struct usbhs_hcd_omap		*omap = dev_get_drvdata(dev);
+	struct usbhs_omap_platform_data	*pdata = dev->platform_data;
+	unsigned			reg;
+	int				i;
+
+	/* Program Common TLL register */
+	reg = usbhs_read(omap->tll_base, OMAP_TLL_SHARED_CONF);
+	reg |= (OMAP_TLL_SHARED_CONF_FCLK_IS_ON
+		| OMAP_TLL_SHARED_CONF_USB_DIVRATION);
+	reg &= ~OMAP_TLL_SHARED_CONF_USB_90D_DDR_EN;
+	reg &= ~OMAP_TLL_SHARED_CONF_USB_180D_SDR_EN;
+
+	usbhs_write(omap->tll_base, OMAP_TLL_SHARED_CONF, reg);
+
+	/* Enable channels now */
+	for (i = 0; i < tll_channel_count; i++) {
+		reg = usbhs_read(omap->tll_base,
+				OMAP_TLL_CHANNEL_CONF(i));
+
+		if (is_ohci_port(pdata->port_mode[i])) {
+			reg |= ohci_omap3_fslsmode(pdata->port_mode[i])
+				<< OMAP_TLL_CHANNEL_CONF_FSLSMODE_SHIFT;
+			reg |= OMAP_TLL_CHANNEL_CONF_CHANMODE_FSLS;
+		} else if (pdata->port_mode[i] == OMAP_EHCI_PORT_MODE_TLL) {
+
+			/* Disable AutoIdle, BitStuffing and use SDR Mode */
+			reg &= ~(OMAP_TLL_CHANNEL_CONF_UTMIAUTOIDLE
+				| OMAP_TLL_CHANNEL_CONF_ULPINOBITSTUFF
+				| OMAP_TLL_CHANNEL_CONF_ULPIDDRMODE);
+
+			reg |= (1 << (i + 1));
+		} else
+			continue;
+
+		reg |= OMAP_TLL_CHANNEL_CONF_CHANEN;
+		usbhs_write(omap->tll_base,
+				OMAP_TLL_CHANNEL_CONF(i), reg);
+
+		usbhs_writeb(omap->tll_base,
+				OMAP_TLL_ULPI_SCRATCH_REGISTER(i), 0xbe);
+	}
+}
+
+static int usbhs_enable(struct device *dev)
+{
+	struct usbhs_hcd_omap		*omap = dev_get_drvdata(dev);
+	struct usbhs_omap_platform_data	*pdata = &omap->platdata;
+	unsigned long			flags = 0;
+	int				ret = 0;
+	unsigned long			timeout;
+	unsigned			reg;
+
+	dev_dbg(dev, "starting TI HSUSB Controller\n");
+	if (!pdata) {
+		dev_dbg(dev, "missing platform_data\n");
+		ret =  -ENODEV;
+		goto end_enable;
+	}
+
+	spin_lock_irqsave(&omap->lock, flags);
+	if (omap->count > 0)
+		goto end_count;
+
+	clk_enable(omap->usbhost_ick);
+	clk_enable(omap->usbhost_hs_fck);
+	clk_enable(omap->usbhost_fs_fck);
+	clk_enable(omap->usbtll_fck);
+	clk_enable(omap->usbtll_ick);
+
+	if (pdata->ehci_data->phy_reset) {
+		if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[0])) {
+			gpio_request(pdata->ehci_data->reset_gpio_port[0],
+						"USB1 PHY reset");
+			gpio_direction_output
+				(pdata->ehci_data->reset_gpio_port[0], 1);
+		}
+
+		if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[1])) {
+			gpio_request(pdata->ehci_data->reset_gpio_port[1],
+						"USB2 PHY reset");
+			gpio_direction_output
+				(pdata->ehci_data->reset_gpio_port[1], 1);
+		}
+
+		/* Hold the PHY in RESET for enough time till DIR is high */
+		udelay(10);
+	}
+
+	omap->usbhs_rev = usbhs_read(omap->uhh_base, OMAP_UHH_REVISION);
+	dev_dbg(dev, "OMAP UHH_REVISION 0x%x\n", omap->usbhs_rev);
+
+	/* perform TLL soft reset, and wait until reset is complete */
+	usbhs_write(omap->tll_base, OMAP_USBTLL_SYSCONFIG,
+			OMAP_USBTLL_SYSCONFIG_SOFTRESET);
+
+	/* Wait for TLL reset to complete */
+	timeout = jiffies + msecs_to_jiffies(1000);
+	while (!(usbhs_read(omap->tll_base, OMAP_USBTLL_SYSSTATUS)
+			& OMAP_USBTLL_SYSSTATUS_RESETDONE)) {
+		cpu_relax();
+
+		if (time_after(jiffies, timeout)) {
+			dev_dbg(dev, "operation timed out\n");
+			ret = -EINVAL;
+			goto err_tll;
+		}
+	}
+
+	dev_dbg(dev, "TLL RESET DONE\n");
+
+	/* (1<<3) = no idle mode only for initial debugging */
+	usbhs_write(omap->tll_base, OMAP_USBTLL_SYSCONFIG,
+			OMAP_USBTLL_SYSCONFIG_ENAWAKEUP |
+			OMAP_USBTLL_SYSCONFIG_SIDLEMODE |
+			OMAP_USBTLL_SYSCONFIG_AUTOIDLE);
+
+	/* Put UHH in NoIdle/NoStandby mode */
+	reg = usbhs_read(omap->uhh_base, OMAP_UHH_SYSCONFIG);
+	if (is_omap_usbhs_rev1(omap)) {
+		reg |= (OMAP_UHH_SYSCONFIG_ENAWAKEUP
+				| OMAP_UHH_SYSCONFIG_SIDLEMODE
+				| OMAP_UHH_SYSCONFIG_CACTIVITY
+				| OMAP_UHH_SYSCONFIG_MIDLEMODE);
+		reg &= ~OMAP_UHH_SYSCONFIG_AUTOIDLE;
+
+
+	} else if (is_omap_usbhs_rev2(omap)) {
+		reg &= ~OMAP4_UHH_SYSCONFIG_IDLEMODE_CLEAR;
+		reg |= OMAP4_UHH_SYSCONFIG_NOIDLE;
+		reg &= ~OMAP4_UHH_SYSCONFIG_STDBYMODE_CLEAR;
+		reg |= OMAP4_UHH_SYSCONFIG_NOSTDBY;
+	}
+
+	usbhs_write(omap->uhh_base, OMAP_UHH_SYSCONFIG, reg);
+
+	reg = usbhs_read(omap->uhh_base, OMAP_UHH_HOSTCONFIG);
+	/* setup ULPI bypass and burst configurations */
+	reg |= (OMAP_UHH_HOSTCONFIG_INCR4_BURST_EN
+			| OMAP_UHH_HOSTCONFIG_INCR8_BURST_EN
+			| OMAP_UHH_HOSTCONFIG_INCR16_BURST_EN);
+	reg |= OMAP4_UHH_HOSTCONFIG_APP_START_CLK;
+	reg &= ~OMAP_UHH_HOSTCONFIG_INCRX_ALIGN_EN;
+
+	if (is_omap_usbhs_rev1(omap)) {
+		if (pdata->port_mode[0] == OMAP_USBHS_PORT_MODE_UNUSED)
+			reg &= ~OMAP_UHH_HOSTCONFIG_P1_CONNECT_STATUS;
+		if (pdata->port_mode[1] == OMAP_USBHS_PORT_MODE_UNUSED)
+			reg &= ~OMAP_UHH_HOSTCONFIG_P2_CONNECT_STATUS;
+		if (pdata->port_mode[2] == OMAP_USBHS_PORT_MODE_UNUSED)
+			reg &= ~OMAP_UHH_HOSTCONFIG_P3_CONNECT_STATUS;
+
+		/* Bypass the TLL module for PHY mode operation */
+		if (cpu_is_omap3430() && (omap_rev() <= OMAP3430_REV_ES2_1)) {
+			dev_dbg(dev, "OMAP3 ES version <= ES2.1\n");
+			if (is_ehci_phy_mode(pdata->port_mode[0]) ||
+				is_ehci_phy_mode(pdata->port_mode[1]) ||
+					is_ehci_phy_mode(pdata->port_mode[2]))
+				reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_BYPASS;
+			else
+				reg |= OMAP_UHH_HOSTCONFIG_ULPI_BYPASS;
+		} else {
+			dev_dbg(dev, "OMAP3 ES version > ES2.1\n");
+			if (is_ehci_phy_mode(pdata->port_mode[0]))
+				reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS;
+			else
+				reg |= OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS;
+			if (is_ehci_phy_mode(pdata->port_mode[1]))
+				reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS;
+			else
+				reg |= OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS;
+			if (is_ehci_phy_mode(pdata->port_mode[2]))
+				reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS;
+			else
+				reg |= OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS;
+		}
+	} else if (is_omap_usbhs_rev2(omap)) {
+		/* Clear port mode fields for PHY mode*/
+		reg &= ~OMAP4_P1_MODE_CLEAR;
+		reg &= ~OMAP4_P2_MODE_CLEAR;
+
+		if (is_ehci_phy_mode(pdata->port_mode[0])) {
+			ret = clk_set_parent(omap->utmi_p1_fck,
+						omap->xclk60mhsp1_ck);
+			if (ret != 0) {
+				dev_err(dev, "xclk60mhsp1_ck set parent"
+				"failed error:%d\n", ret);
+				goto err_tll;
+			}
+		} else if (is_ehci_tll_mode(pdata->port_mode[0])) {
+			ret = clk_set_parent(omap->utmi_p1_fck,
+						omap->init_60m_fclk);
+			if (ret != 0) {
+				dev_err(dev, "init_60m_fclk set parent"
+				"failed error:%d\n", ret);
+				goto err_tll;
+			}
+			clk_enable(omap->usbhost_p1_fck);
+			clk_enable(omap->usbtll_p1_fck);
+		}
+
+		if (is_ehci_phy_mode(pdata->port_mode[1])) {
+			ret = clk_set_parent(omap->utmi_p2_fck,
+						omap->xclk60mhsp2_ck);
+			if (ret != 0) {
+				dev_err(dev, "xclk60mhsp1_ck set parent"
+					"failed error:%d\n", ret);
+				goto err_tll;
+			}
+		} else if (is_ehci_tll_mode(pdata->port_mode[1])) {
+			ret = clk_set_parent(omap->utmi_p2_fck,
+						omap->init_60m_fclk);
+			if (ret != 0) {
+				dev_err(dev, "init_60m_fclk set parent"
+				"failed error:%d\n", ret);
+				goto err_tll;
+			}
+			clk_enable(omap->usbhost_p2_fck);
+			clk_enable(omap->usbtll_p2_fck);
+		}
+
+		clk_enable(omap->utmi_p1_fck);
+		clk_enable(omap->utmi_p2_fck);
+
+		if (is_ehci_tll_mode(pdata->port_mode[0]) ||
+			(is_ohci_port(pdata->port_mode[0])))
+			reg |= OMAP4_P1_MODE_TLL;
+		else if (is_ehci_hsic_mode(pdata->port_mode[0]))
+			reg |= OMAP4_P1_MODE_HSIC;
+
+		if (is_ehci_tll_mode(pdata->port_mode[1]) ||
+			(is_ohci_port(pdata->port_mode[1])))
+			reg |= OMAP4_P2_MODE_TLL;
+		else if (is_ehci_hsic_mode(pdata->port_mode[1]))
+			reg |= OMAP4_P2_MODE_HSIC;
+	}
+
+	usbhs_write(omap->uhh_base, OMAP_UHH_HOSTCONFIG, reg);
+	dev_dbg(dev, "UHH setup done, uhh_hostconfig=%x\n", reg);
+
+	if (is_ehci_tll_mode(pdata->port_mode[0]) ||
+		is_ehci_tll_mode(pdata->port_mode[1]) ||
+		is_ehci_tll_mode(pdata->port_mode[2]) ||
+		(is_ohci_port(pdata->port_mode[0])) ||
+		(is_ohci_port(pdata->port_mode[1])) ||
+		(is_ohci_port(pdata->port_mode[2]))) {
+
+		/* Enable UTMI mode for required TLL channels */
+		if (is_omap_usbhs_rev2(omap))
+			usbhs_omap_tll_init(dev, OMAP_REV2_TLL_CHANNEL_COUNT);
+		else
+			usbhs_omap_tll_init(dev, OMAP_TLL_CHANNEL_COUNT);
+	}
+
+	if (pdata->ehci_data->phy_reset) {
+		/* Hold the PHY in RESET for enough time till
+		 * PHY is settled and ready
+		 */
+		udelay(10);
+
+		if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[0]))
+			gpio_set_value
+				(pdata->ehci_data->reset_gpio_port[0], 0);
+
+		if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[1]))
+			gpio_set_value
+				(pdata->ehci_data->reset_gpio_port[1], 0);
+	}
+
+end_count:
+	omap->count++;
+	goto end_enable;
+
+err_tll:
+	if (pdata->ehci_data->phy_reset) {
+		if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[0]))
+			gpio_free(pdata->ehci_data->reset_gpio_port[0]);
+
+		if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[1]))
+			gpio_free(pdata->ehci_data->reset_gpio_port[1]);
+	}
+
+	clk_disable(omap->usbtll_ick);
+	clk_disable(omap->usbtll_fck);
+	clk_disable(omap->usbhost_fs_fck);
+	clk_disable(omap->usbhost_hs_fck);
+	clk_disable(omap->usbhost_ick);
+
+end_enable:
+	spin_unlock_irqrestore(&omap->lock, flags);
+	return ret;
+}
+
+static void usbhs_disable(struct device *dev)
+{
+	struct usbhs_hcd_omap		*omap = dev_get_drvdata(dev);
+	struct usbhs_omap_platform_data	*pdata = &omap->platdata;
+	unsigned long			flags = 0;
+	unsigned long			timeout;
+
+	dev_dbg(dev, "stopping TI HSUSB Controller\n");
+
+	spin_lock_irqsave(&omap->lock, flags);
+
+	if (omap->count == 0)
+		goto end_disble;
+
+	omap->count--;
+
+	if (omap->count != 0)
+		goto end_disble;
+
+	/* Reset OMAP modules for insmod/rmmod to work */
+	usbhs_write(omap->uhh_base, OMAP_UHH_SYSCONFIG,
+			is_omap_usbhs_rev2(omap) ?
+			OMAP4_UHH_SYSCONFIG_SOFTRESET :
+			OMAP_UHH_SYSCONFIG_SOFTRESET);
+
+	timeout = jiffies + msecs_to_jiffies(100);
+	while (!(usbhs_read(omap->uhh_base, OMAP_UHH_SYSSTATUS)
+				& (1 << 0))) {
+		cpu_relax();
+
+		if (time_after(jiffies, timeout))
+			dev_dbg(dev, "operation timed out\n");
+	}
+
+	while (!(usbhs_read(omap->uhh_base, OMAP_UHH_SYSSTATUS)
+				& (1 << 1))) {
+		cpu_relax();
+
+		if (time_after(jiffies, timeout))
+			dev_dbg(dev, "operation timed out\n");
+	}
+
+	while (!(usbhs_read(omap->uhh_base, OMAP_UHH_SYSSTATUS)
+				& (1 << 2))) {
+		cpu_relax();
+
+		if (time_after(jiffies, timeout))
+			dev_dbg(dev, "operation timed out\n");
+	}
+
+	usbhs_write(omap->tll_base, OMAP_USBTLL_SYSCONFIG, (1 << 1));
+
+	while (!(usbhs_read(omap->tll_base, OMAP_USBTLL_SYSSTATUS)
+				& (1 << 0))) {
+		cpu_relax();
+
+		if (time_after(jiffies, timeout))
+			dev_dbg(dev, "operation timed out\n");
+	}
+
+	if (pdata->ehci_data->phy_reset) {
+		if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[0]))
+			gpio_free(pdata->ehci_data->reset_gpio_port[0]);
+
+		if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[1]))
+			gpio_free(pdata->ehci_data->reset_gpio_port[1]);
+	}
+
+	clk_disable(omap->utmi_p2_fck);
+	clk_disable(omap->utmi_p1_fck);
+	clk_disable(omap->usbtll_ick);
+	clk_disable(omap->usbtll_fck);
+	clk_disable(omap->usbhost_fs_fck);
+	clk_disable(omap->usbhost_hs_fck);
+	clk_disable(omap->usbhost_ick);
+
+end_disble:
+	spin_unlock_irqrestore(&omap->lock, flags);
+}
+
+int omap_usbhs_enable(struct device *dev)
+{
+	return  usbhs_enable(dev->parent);
+}
+EXPORT_SYMBOL_GPL(omap_usbhs_enable);
+
+void omap_usbhs_disable(struct device *dev)
+{
+	usbhs_disable(dev->parent);
+}
+EXPORT_SYMBOL_GPL(omap_usbhs_disable);
+
+static struct platform_driver usbhs_omap_driver = {
+	.driver = {
+		.name		= (char *)usbhs_driver_name,
+		.owner		= THIS_MODULE,
+	},
+	.remove		= __exit_p(usbhs_omap_remove),
+};
+
+MODULE_AUTHOR("Keshava Munegowda <keshava_mgowda@ti.com>");
+MODULE_ALIAS("platform:" USBHS_DRIVER_NAME);
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("usb host common core driver for omap EHCI and OHCI");
+
+static int __init omap_usbhs_drvinit(void)
+{
+	return platform_driver_probe(&usbhs_omap_driver, usbhs_omap_probe);
+}
+
+/*
+ * init before ehci and ohci drivers;
+ * The usbhs core driver should be initialized much before
+ * the omap ehci and ohci probe functions are called.
+ */
+fs_initcall(omap_usbhs_drvinit);
+
+static void __exit omap_usbhs_drvexit(void)
+{
+	platform_driver_unregister(&usbhs_omap_driver);
+}
+module_exit(omap_usbhs_drvexit);