mfd: mmc: rtsx: Change default tx phase

The default phase can meet most cards' requirement, but it is not the
optimal one. In some extreme situation, the rx phase point produced by
the following tuning process will drift quite a distance.
Before tuning UHS card, this patch will set a more proper initial tx
phase point, which is calculated from statistic data, and can achieve
a much better tx signal quality.

Signed-off-by: Wei WANG <wei_wang@realsil.com.cn>
Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Chris Ball <cjb@laptop.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

5 files changed, 12 insertions, 0 deletions

diff --git a/drivers/mfd/rtl8411.c b/drivers/mfd/rtl8411.c
index e4c1833154e..52801351864 100644
--- a/drivers/mfd/rtl8411.c
+++ b/drivers/mfd/rtl8411.c
@@ -452,6 +452,8 @@ void rtl8411_init_params(struct rtsx_pcr *pcr)
 	pcr->sd30_drive_sel_1v8 = DRIVER_TYPE_B;
 	pcr->sd30_drive_sel_3v3 = DRIVER_TYPE_D;
 	pcr->aspm_en = ASPM_L1_EN;
+	pcr->tx_initial_phase = SET_CLOCK_PHASE(23, 7, 14);
+	pcr->rx_initial_phase = SET_CLOCK_PHASE(4, 3, 10);
 
 	pcr->ic_version = rtl8411_get_ic_version(pcr);
 	pcr->sd_pull_ctl_enable_tbl = rtl8411_sd_pull_ctl_enable_tbl;
@@ -471,6 +473,8 @@ void rtl8411b_init_params(struct rtsx_pcr *pcr)
 	pcr->sd30_drive_sel_1v8 = DRIVER_TYPE_B;
 	pcr->sd30_drive_sel_3v3 = DRIVER_TYPE_D;
 	pcr->aspm_en = ASPM_L1_EN;
+	pcr->tx_initial_phase = SET_CLOCK_PHASE(23, 7, 14);
+	pcr->rx_initial_phase = SET_CLOCK_PHASE(4, 3, 10);
 
 	pcr->ic_version = rtl8411_get_ic_version(pcr);
 
diff --git a/drivers/mfd/rts5209.c b/drivers/mfd/rts5209.c
index 4026e1fcb0a..cb04174a892 100644
--- a/drivers/mfd/rts5209.c
+++ b/drivers/mfd/rts5209.c
@@ -270,6 +270,8 @@ void rts5209_init_params(struct rtsx_pcr *pcr)
 	pcr->sd30_drive_sel_1v8 = DRIVER_TYPE_B;
 	pcr->sd30_drive_sel_3v3 = DRIVER_TYPE_D;
 	pcr->aspm_en = ASPM_L1_EN;
+	pcr->tx_initial_phase = SET_CLOCK_PHASE(27, 27, 16);
+	pcr->rx_initial_phase = SET_CLOCK_PHASE(24, 6, 5);
 
 	pcr->ic_version = rts5209_get_ic_version(pcr);
 	pcr->sd_pull_ctl_enable_tbl = rts5209_sd_pull_ctl_enable_tbl;
diff --git a/drivers/mfd/rts5227.c b/drivers/mfd/rts5227.c
index d7cae82720a..c001151378b 100644
--- a/drivers/mfd/rts5227.c
+++ b/drivers/mfd/rts5227.c
@@ -291,6 +291,8 @@ void rts5227_init_params(struct rtsx_pcr *pcr)
 	pcr->sd30_drive_sel_1v8 = CFG_DRIVER_TYPE_B;
 	pcr->sd30_drive_sel_3v3 = CFG_DRIVER_TYPE_B;
 	pcr->aspm_en = ASPM_L1_EN;
+	pcr->tx_initial_phase = SET_CLOCK_PHASE(27, 27, 15);
+	pcr->rx_initial_phase = SET_CLOCK_PHASE(30, 7, 7);
 
 	pcr->sd_pull_ctl_enable_tbl = rts5227_sd_pull_ctl_enable_tbl;
 	pcr->sd_pull_ctl_disable_tbl = rts5227_sd_pull_ctl_disable_tbl;
diff --git a/drivers/mfd/rts5229.c b/drivers/mfd/rts5229.c
index 620e7fa9e0d..6353f5df087 100644
--- a/drivers/mfd/rts5229.c
+++ b/drivers/mfd/rts5229.c
@@ -261,6 +261,8 @@ void rts5229_init_params(struct rtsx_pcr *pcr)
 	pcr->sd30_drive_sel_1v8 = DRIVER_TYPE_B;
 	pcr->sd30_drive_sel_3v3 = DRIVER_TYPE_D;
 	pcr->aspm_en = ASPM_L1_EN;
+	pcr->tx_initial_phase = SET_CLOCK_PHASE(27, 27, 15);
+	pcr->rx_initial_phase = SET_CLOCK_PHASE(30, 6, 6);
 
 	pcr->ic_version = rts5229_get_ic_version(pcr);
 	if (pcr->ic_version == IC_VER_C) {
diff --git a/drivers/mfd/rts5249.c b/drivers/mfd/rts5249.c
index ea90f8fb92a..3b835f593e3 100644
--- a/drivers/mfd/rts5249.c
+++ b/drivers/mfd/rts5249.c
@@ -298,6 +298,8 @@ void rts5249_init_params(struct rtsx_pcr *pcr)
 	pcr->sd30_drive_sel_1v8 = CFG_DRIVER_TYPE_C;
 	pcr->sd30_drive_sel_3v3 = CFG_DRIVER_TYPE_B;
 	pcr->aspm_en = ASPM_L1_EN;
+	pcr->tx_initial_phase = SET_CLOCK_PHASE(1, 29, 16);
+	pcr->rx_initial_phase = SET_CLOCK_PHASE(24, 6, 5);
 
 	pcr->ic_version = rts5249_get_ic_version(pcr);
 	pcr->sd_pull_ctl_enable_tbl = rts5249_sd_pull_ctl_enable_tbl;