[IA64] move XP and XPC to drivers/misc/sgi-xp

Move XPC and XPNET from arch/ia64/sn/kernel to drivers/misc/sgi-xp.

Signed-off-by: Dean Nelson <dcn@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>

1 files changed, 485 insertions, 0 deletions

diff --git a/drivers/misc/sgi-xp/xp.h b/drivers/misc/sgi-xp/xp.h
new file mode 100644
index 00000000000..fb65981754c
--- /dev/null
+++ b/drivers/misc/sgi-xp/xp.h
@@ -0,0 +1,485 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2004-2008 Silicon Graphics, Inc. All rights reserved.
+ */
+
+
+/*
+ * External Cross Partition (XP) structures and defines.
+ */
+
+
+#ifndef _DRIVERS_MISC_SGIXP_XP_H
+#define _DRIVERS_MISC_SGIXP_XP_H
+
+
+#include <linux/cache.h>
+#include <linux/hardirq.h>
+#include <linux/mutex.h>
+#include <asm/sn/types.h>
+#include <asm/sn/bte.h>
+
+
+#ifdef USE_DBUG_ON
+#define DBUG_ON(condition)	BUG_ON(condition)
+#else
+#define DBUG_ON(condition)
+#endif
+
+
+/*
+ * Define the maximum number of logically defined partitions the system
+ * can support. It is constrained by the maximum number of hardware
+ * partitionable regions. The term 'region' in this context refers to the
+ * minimum number of nodes that can comprise an access protection grouping.
+ * The access protection is in regards to memory, IPI and IOI.
+ *
+ * The maximum number of hardware partitionable regions is equal to the
+ * maximum number of nodes in the entire system divided by the minimum number
+ * of nodes that comprise an access protection grouping.
+ */
+#define XP_MAX_PARTITIONS	64
+
+
+/*
+ * Define the number of u64s required to represent all the C-brick nasids
+ * as a bitmap.  The cross-partition kernel modules deal only with
+ * C-brick nasids, thus the need for bitmaps which don't account for
+ * odd-numbered (non C-brick) nasids.
+ */
+#define XP_MAX_PHYSNODE_ID	(MAX_NUMALINK_NODES / 2)
+#define XP_NASID_MASK_BYTES	((XP_MAX_PHYSNODE_ID + 7) / 8)
+#define XP_NASID_MASK_WORDS	((XP_MAX_PHYSNODE_ID + 63) / 64)
+
+
+/*
+ * Wrapper for bte_copy() that should it return a failure status will retry
+ * the bte_copy() once in the hope that the failure was due to a temporary
+ * aberration (i.e., the link going down temporarily).
+ *
+ * 	src - physical address of the source of the transfer.
+ *	vdst - virtual address of the destination of the transfer.
+ *	len - number of bytes to transfer from source to destination.
+ *	mode - see bte_copy() for definition.
+ *	notification - see bte_copy() for definition.
+ *
+ * Note: xp_bte_copy() should never be called while holding a spinlock.
+ */
+static inline bte_result_t
+xp_bte_copy(u64 src, u64 vdst, u64 len, u64 mode, void *notification)
+{
+	bte_result_t ret;
+	u64 pdst = ia64_tpa(vdst);
+
+
+	/*
+	 * Ensure that the physically mapped memory is contiguous.
+	 *
+	 * We do this by ensuring that the memory is from region 7 only.
+	 * If the need should arise to use memory from one of the other
+	 * regions, then modify the BUG_ON() statement to ensure that the
+	 * memory from that region is always physically contiguous.
+	 */
+	BUG_ON(REGION_NUMBER(vdst) != RGN_KERNEL);
+
+	ret = bte_copy(src, pdst, len, mode, notification);
+	if ((ret != BTE_SUCCESS) && BTE_ERROR_RETRY(ret)) {
+		if (!in_interrupt()) {
+			cond_resched();
+		}
+		ret = bte_copy(src, pdst, len, mode, notification);
+	}
+
+	return ret;
+}
+
+
+/*
+ * XPC establishes channel connections between the local partition and any
+ * other partition that is currently up. Over these channels, kernel-level
+ * `users' can communicate with their counterparts on the other partitions.
+ *
+ * The maxinum number of channels is limited to eight. For performance reasons,
+ * the internal cross partition structures require sixteen bytes per channel,
+ * and eight allows all of this interface-shared info to fit in one cache line.
+ *
+ * XPC_NCHANNELS reflects the total number of channels currently defined.
+ * If the need for additional channels arises, one can simply increase
+ * XPC_NCHANNELS accordingly. If the day should come where that number
+ * exceeds the MAXIMUM number of channels allowed (eight), then one will need
+ * to make changes to the XPC code to allow for this.
+ */
+#define XPC_MEM_CHANNEL		0	/* memory channel number */
+#define	XPC_NET_CHANNEL		1	/* network channel number */
+
+#define	XPC_NCHANNELS		2	/* #of defined channels */
+#define XPC_MAX_NCHANNELS	8	/* max #of channels allowed */
+
+#if XPC_NCHANNELS > XPC_MAX_NCHANNELS
+#error	XPC_NCHANNELS exceeds MAXIMUM allowed.
+#endif
+
+
+/*
+ * The format of an XPC message is as follows:
+ *
+ *      +-------+--------------------------------+
+ *      | flags |////////////////////////////////|
+ *      +-------+--------------------------------+
+ *      |             message #                  |
+ *      +----------------------------------------+
+ *      |     payload (user-defined message)     |
+ *      |                                        |
+ *         		:
+ *      |                                        |
+ *      +----------------------------------------+
+ *
+ * The size of the payload is defined by the user via xpc_connect(). A user-
+ * defined message resides in the payload area.
+ *
+ * The user should have no dealings with the message header, but only the
+ * message's payload. When a message entry is allocated (via xpc_allocate())
+ * a pointer to the payload area is returned and not the actual beginning of
+ * the XPC message. The user then constructs a message in the payload area
+ * and passes that pointer as an argument on xpc_send() or xpc_send_notify().
+ *
+ * The size of a message entry (within a message queue) must be a cacheline
+ * sized multiple in order to facilitate the BTE transfer of messages from one
+ * message queue to another. A macro, XPC_MSG_SIZE(), is provided for the user
+ * that wants to fit as many msg entries as possible in a given memory size
+ * (e.g. a memory page).
+ */
+struct xpc_msg {
+	u8 flags;		/* FOR XPC INTERNAL USE ONLY */
+	u8 reserved[7];		/* FOR XPC INTERNAL USE ONLY */
+	s64 number;		/* FOR XPC INTERNAL USE ONLY */
+
+	u64 payload;		/* user defined portion of message */
+};
+
+
+#define XPC_MSG_PAYLOAD_OFFSET	(u64) (&((struct xpc_msg *)0)->payload)
+#define XPC_MSG_SIZE(_payload_size) \
+		L1_CACHE_ALIGN(XPC_MSG_PAYLOAD_OFFSET + (_payload_size))
+
+
+/*
+ * Define the return values and values passed to user's callout functions.
+ * (It is important to add new value codes at the end just preceding
+ * xpcUnknownReason, which must have the highest numerical value.)
+ */
+enum xpc_retval {
+	xpcSuccess = 0,
+
+	xpcNotConnected,	/*  1: channel is not connected */
+	xpcConnected,		/*  2: channel connected (opened) */
+	xpcRETIRED1,		/*  3: (formerly xpcDisconnected) */
+
+	xpcMsgReceived,		/*  4: message received */
+	xpcMsgDelivered,	/*  5: message delivered and acknowledged */
+
+	xpcRETIRED2,		/*  6: (formerly xpcTransferFailed) */
+
+	xpcNoWait,		/*  7: operation would require wait */
+	xpcRetry,		/*  8: retry operation */
+	xpcTimeout,		/*  9: timeout in xpc_allocate_msg_wait() */
+	xpcInterrupted,		/* 10: interrupted wait */
+
+	xpcUnequalMsgSizes,	/* 11: message size disparity between sides */
+	xpcInvalidAddress,	/* 12: invalid address */
+
+	xpcNoMemory,		/* 13: no memory available for XPC structures */
+	xpcLackOfResources,	/* 14: insufficient resources for operation */
+	xpcUnregistered,	/* 15: channel is not registered */
+	xpcAlreadyRegistered,	/* 16: channel is already registered */
+
+	xpcPartitionDown,	/* 17: remote partition is down */
+	xpcNotLoaded,		/* 18: XPC module is not loaded */
+	xpcUnloading,		/* 19: this side is unloading XPC module */
+
+	xpcBadMagic,		/* 20: XPC MAGIC string not found */
+
+	xpcReactivating,	/* 21: remote partition was reactivated */
+
+	xpcUnregistering,	/* 22: this side is unregistering channel */
+	xpcOtherUnregistering,	/* 23: other side is unregistering channel */
+
+	xpcCloneKThread,	/* 24: cloning kernel thread */
+	xpcCloneKThreadFailed,	/* 25: cloning kernel thread failed */
+
+	xpcNoHeartbeat,		/* 26: remote partition has no heartbeat */
+
+	xpcPioReadError,	/* 27: PIO read error */
+	xpcPhysAddrRegFailed,	/* 28: registration of phys addr range failed */
+
+	xpcBteDirectoryError,	/* 29: maps to BTEFAIL_DIR */
+	xpcBtePoisonError,	/* 30: maps to BTEFAIL_POISON */
+	xpcBteWriteError,	/* 31: maps to BTEFAIL_WERR */
+	xpcBteAccessError,	/* 32: maps to BTEFAIL_ACCESS */
+	xpcBtePWriteError,	/* 33: maps to BTEFAIL_PWERR */
+	xpcBtePReadError,	/* 34: maps to BTEFAIL_PRERR */
+	xpcBteTimeOutError,	/* 35: maps to BTEFAIL_TOUT */
+	xpcBteXtalkError,	/* 36: maps to BTEFAIL_XTERR */
+	xpcBteNotAvailable,	/* 37: maps to BTEFAIL_NOTAVAIL */
+	xpcBteUnmappedError,	/* 38: unmapped BTEFAIL_ error */
+
+	xpcBadVersion,		/* 39: bad version number */
+	xpcVarsNotSet,		/* 40: the XPC variables are not set up */
+	xpcNoRsvdPageAddr,	/* 41: unable to get rsvd page's phys addr */
+	xpcInvalidPartid,	/* 42: invalid partition ID */
+	xpcLocalPartid,		/* 43: local partition ID */
+
+	xpcOtherGoingDown,	/* 44: other side going down, reason unknown */
+	xpcSystemGoingDown,	/* 45: system is going down, reason unknown */
+	xpcSystemHalt,		/* 46: system is being halted */
+	xpcSystemReboot,	/* 47: system is being rebooted */
+	xpcSystemPoweroff,	/* 48: system is being powered off */
+
+	xpcDisconnecting,	/* 49: channel disconnecting (closing) */
+
+	xpcOpenCloseError,	/* 50: channel open/close protocol error */
+
+	xpcDisconnected,	/* 51: channel disconnected (closed) */
+
+	xpcBteSh2Start,		/* 52: BTE CRB timeout */
+
+				/* 53: 0x1 BTE Error Response Short */
+	xpcBteSh2RspShort = xpcBteSh2Start + BTEFAIL_SH2_RESP_SHORT,
+
+				/* 54: 0x2 BTE Error Response Long */
+	xpcBteSh2RspLong = xpcBteSh2Start + BTEFAIL_SH2_RESP_LONG,
+
+				/* 56: 0x4 BTE Error Response DSB */
+	xpcBteSh2RspDSB = xpcBteSh2Start + BTEFAIL_SH2_RESP_DSP,
+
+				/* 60: 0x8 BTE Error Response Access */
+	xpcBteSh2RspAccess = xpcBteSh2Start + BTEFAIL_SH2_RESP_ACCESS,
+
+				/* 68: 0x10 BTE Error CRB timeout */
+	xpcBteSh2CRBTO = xpcBteSh2Start + BTEFAIL_SH2_CRB_TO,
+
+				/* 84: 0x20 BTE Error NACK limit */
+	xpcBteSh2NACKLimit = xpcBteSh2Start + BTEFAIL_SH2_NACK_LIMIT,
+
+				/* 115: BTE end */
+	xpcBteSh2End = xpcBteSh2Start + BTEFAIL_SH2_ALL,
+
+	xpcUnknownReason	/* 116: unknown reason -- must be last in list */
+};
+
+
+/*
+ * Define the callout function types used by XPC to update the user on
+ * connection activity and state changes (via the user function registered by
+ * xpc_connect()) and to notify them of messages received and delivered (via
+ * the user function registered by xpc_send_notify()).
+ *
+ * The two function types are xpc_channel_func and xpc_notify_func and
+ * both share the following arguments, with the exception of "data", which
+ * only xpc_channel_func has.
+ *
+ * Arguments:
+ *
+ *	reason - reason code. (See following table.)
+ *	partid - partition ID associated with condition.
+ *	ch_number - channel # associated with condition.
+ *	data - pointer to optional data. (See following table.)
+ *	key - pointer to optional user-defined value provided as the "key"
+ *	      argument to xpc_connect() or xpc_send_notify().
+ *
+ * In the following table the "Optional Data" column applies to callouts made
+ * to functions registered by xpc_connect(). A "NA" in that column indicates
+ * that this reason code can be passed to functions registered by
+ * xpc_send_notify() (i.e. they don't have data arguments).
+ *
+ * Also, the first three reason codes in the following table indicate
+ * success, whereas the others indicate failure. When a failure reason code
+ * is received, one can assume that the channel is not connected.
+ *
+ *
+ * Reason Code          | Cause                          | Optional Data
+ * =====================+================================+=====================
+ * xpcConnected         | connection has been established| max #of entries
+ *                      | to the specified partition on  | allowed in message
+ *                      | the specified channel          | queue
+ * ---------------------+--------------------------------+---------------------
+ * xpcMsgReceived       | an XPC message arrived from    | address of payload
+ *                      | the specified partition on the |
+ *                      | specified channel              | [the user must call
+ *                      |                                | xpc_received() when
+ *                      |                                | finished with the
+ *                      |                                | payload]
+ * ---------------------+--------------------------------+---------------------
+ * xpcMsgDelivered      | notification that the message  | NA
+ *                      | was delivered to the intended  |
+ *                      | recipient and that they have   |
+ *                      | acknowledged its receipt by    |
+ *                      | calling xpc_received()         |
+ * =====================+================================+=====================
+ * xpcUnequalMsgSizes   | can't connect to the specified | NULL
+ *                      | partition on the specified     |
+ *                      | channel because of mismatched  |
+ *                      | message sizes                  |
+ * ---------------------+--------------------------------+---------------------
+ * xpcNoMemory          | insufficient memory avaiable   | NULL
+ *                      | to allocate message queue      |
+ * ---------------------+--------------------------------+---------------------
+ * xpcLackOfResources   | lack of resources to create    | NULL
+ *                      | the necessary kthreads to      |
+ *                      | support the channel            |
+ * ---------------------+--------------------------------+---------------------
+ * xpcUnregistering     | this side's user has           | NULL or NA
+ *                      | unregistered by calling        |
+ *                      | xpc_disconnect()               |
+ * ---------------------+--------------------------------+---------------------
+ * xpcOtherUnregistering| the other side's user has      | NULL or NA
+ *                      | unregistered by calling        |
+ *                      | xpc_disconnect()               |
+ * ---------------------+--------------------------------+---------------------
+ * xpcNoHeartbeat       | the other side's XPC is no     | NULL or NA
+ *                      | longer heartbeating            |
+ *                      |                                |
+ * ---------------------+--------------------------------+---------------------
+ * xpcUnloading         | this side's XPC module is      | NULL or NA
+ *                      | being unloaded                 |
+ *                      |                                |
+ * ---------------------+--------------------------------+---------------------
+ * xpcOtherUnloading    | the other side's XPC module is | NULL or NA
+ *                      | is being unloaded              |
+ *                      |                                |
+ * ---------------------+--------------------------------+---------------------
+ * xpcPioReadError      | xp_nofault_PIOR() returned an  | NULL or NA
+ *                      | error while sending an IPI     |
+ *                      |                                |
+ * ---------------------+--------------------------------+---------------------
+ * xpcInvalidAddress    | the address either received or | NULL or NA
+ *                      | sent by the specified partition|
+ *                      | is invalid                     |
+ * ---------------------+--------------------------------+---------------------
+ * xpcBteNotAvailable   | attempt to pull data from the  | NULL or NA
+ * xpcBtePoisonError    | specified partition over the   |
+ * xpcBteWriteError     | specified channel via a        |
+ * xpcBteAccessError    | bte_copy() failed              |
+ * xpcBteTimeOutError   |                                |
+ * xpcBteXtalkError     |                                |
+ * xpcBteDirectoryError |                                |
+ * xpcBteGenericError   |                                |
+ * xpcBteUnmappedError  |                                |
+ * ---------------------+--------------------------------+---------------------
+ * xpcUnknownReason     | the specified channel to the   | NULL or NA
+ *                      | specified partition was        |
+ *                      | unavailable for unknown reasons|
+ * =====================+================================+=====================
+ */
+
+typedef void (*xpc_channel_func)(enum xpc_retval reason, partid_t partid,
+		int ch_number, void *data, void *key);
+
+typedef void (*xpc_notify_func)(enum xpc_retval reason, partid_t partid,
+		int ch_number, void *key);
+
+
+/*
+ * The following is a registration entry. There is a global array of these,
+ * one per channel. It is used to record the connection registration made
+ * by the users of XPC. As long as a registration entry exists, for any
+ * partition that comes up, XPC will attempt to establish a connection on
+ * that channel. Notification that a connection has been made will occur via
+ * the xpc_channel_func function.
+ *
+ * The 'func' field points to the function to call when aynchronous
+ * notification is required for such events as: a connection established/lost,
+ * or an incoming message received, or an error condition encountered. A
+ * non-NULL 'func' field indicates that there is an active registration for
+ * the channel.
+ */
+struct xpc_registration {
+	struct mutex mutex;
+	xpc_channel_func func;		/* function to call */
+	void *key;			/* pointer to user's key */
+	u16 nentries;			/* #of msg entries in local msg queue */
+	u16 msg_size;			/* message queue's message size */
+	u32 assigned_limit;		/* limit on #of assigned kthreads */
+	u32 idle_limit;			/* limit on #of idle kthreads */
+} ____cacheline_aligned;
+
+
+#define XPC_CHANNEL_REGISTERED(_c)	(xpc_registrations[_c].func != NULL)
+
+
+/* the following are valid xpc_allocate() flags */
+#define XPC_WAIT	0		/* wait flag */
+#define XPC_NOWAIT	1		/* no wait flag */
+
+
+struct xpc_interface {
+	void (*connect)(int);
+	void (*disconnect)(int);
+	enum xpc_retval (*allocate)(partid_t, int, u32, void **);
+	enum xpc_retval (*send)(partid_t, int, void *);
+	enum xpc_retval (*send_notify)(partid_t, int, void *,
+						xpc_notify_func, void *);
+	void (*received)(partid_t, int, void *);
+	enum xpc_retval (*partid_to_nasids)(partid_t, void *);
+};
+
+
+extern struct xpc_interface xpc_interface;
+
+extern void xpc_set_interface(void (*)(int),
+		void (*)(int),
+		enum xpc_retval (*)(partid_t, int, u32, void **),
+		enum xpc_retval (*)(partid_t, int, void *),
+		enum xpc_retval (*)(partid_t, int, void *, xpc_notify_func,
+								void *),
+		void (*)(partid_t, int, void *),
+		enum xpc_retval (*)(partid_t, void *));
+extern void xpc_clear_interface(void);
+
+
+extern enum xpc_retval xpc_connect(int, xpc_channel_func, void *, u16,
+						u16, u32, u32);
+extern void xpc_disconnect(int);
+
+static inline enum xpc_retval
+xpc_allocate(partid_t partid, int ch_number, u32 flags, void **payload)
+{
+	return xpc_interface.allocate(partid, ch_number, flags, payload);
+}
+
+static inline enum xpc_retval
+xpc_send(partid_t partid, int ch_number, void *payload)
+{
+	return xpc_interface.send(partid, ch_number, payload);
+}
+
+static inline enum xpc_retval
+xpc_send_notify(partid_t partid, int ch_number, void *payload,
+			xpc_notify_func func, void *key)
+{
+	return xpc_interface.send_notify(partid, ch_number, payload, func, key);
+}
+
+static inline void
+xpc_received(partid_t partid, int ch_number, void *payload)
+{
+	return xpc_interface.received(partid, ch_number, payload);
+}
+
+static inline enum xpc_retval
+xpc_partid_to_nasids(partid_t partid, void *nasids)
+{
+	return xpc_interface.partid_to_nasids(partid, nasids);
+}
+
+
+extern u64 xp_nofault_PIOR_target;
+extern int xp_nofault_PIOR(void *);
+extern int xp_error_PIOR(void);
+
+
+#endif /* _DRIVERS_MISC_SGIXP_XP_H */
+