Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (179 commits)
  ACPI: Fix acpi_processor_idle and idle= boot parameters interaction
  acpi: fix section mismatch warning in pnpacpi
  intel_menlo: fix build warning
  ACPI: Cleanup: Remove unneeded, multiple local dummy variables
  ACPI: video - fix permissions on some proc entries
  ACPI: video - properly handle errors when registering proc elements
  ACPI: video - do not store invalid entries in attached_array list
  ACPI: re-name acpi_pm_ops to acpi_suspend_ops
  ACER_WMI/ASUS_LAPTOP: fix build bug
  thinkpad_acpi: fix possible NULL pointer dereference if kstrdup failed
  ACPI: check a return value correctly in acpi_power_get_context()
  #if 0 acpi/bay.c:eject_removable_drive()
  eeepc-laptop: add hwmon fan control
  eeepc-laptop: add backlight
  eeepc-laptop: add base driver
  ACPI: thinkpad-acpi: bump up version to 0.20
  ACPI: thinkpad-acpi: fix selects in Kconfig
  ACPI: thinkpad-acpi: use a private workqueue
  ACPI: thinkpad-acpi: fluff really minor fix
  ACPI: thinkpad-acpi: use uppercase for "LED" on user documentation
  ...

Fixed conflicts in drivers/acpi/video.c and drivers/misc/intel_menlow.c
manually.

4 files changed, 1260 insertions, 195 deletions

diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 297a48f8544..636af286230 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -140,6 +140,7 @@ config ACER_WMI
 	depends on EXPERIMENTAL
 	depends on ACPI
 	depends on LEDS_CLASS
+	depends on NEW_LEDS
 	depends on BACKLIGHT_CLASS_DEVICE
 	depends on SERIO_I8042
 	select ACPI_WMI
@@ -160,6 +161,7 @@ config ASUS_LAPTOP
         depends on ACPI
 	depends on EXPERIMENTAL && !ACPI_ASUS
 	depends on LEDS_CLASS
+	depends on NEW_LEDS
 	depends on BACKLIGHT_CLASS_DEVICE
         ---help---
 	  This is the new Linux driver for Asus laptops. It may also support some
@@ -241,10 +243,13 @@ config SONYPI_COMPAT
 config THINKPAD_ACPI
 	tristate "ThinkPad ACPI Laptop Extras"
 	depends on X86 && ACPI
+	select BACKLIGHT_LCD_SUPPORT
 	select BACKLIGHT_CLASS_DEVICE
 	select HWMON
 	select NVRAM
-	depends on INPUT
+	select INPUT
+	select NEW_LEDS
+	select LEDS_CLASS
 	---help---
 	  This is a driver for the IBM and Lenovo ThinkPad laptops. It adds
 	  support for Fn-Fx key combinations, Bluetooth control, video
@@ -344,6 +349,7 @@ config ATMEL_SSC
 config INTEL_MENLOW
 	tristate "Thermal Management driver for Intel menlow platform"
 	depends on ACPI_THERMAL
+	select THERMAL
 	depends on X86
 	---help---
 	  ACPI thermal management enhancement driver on
@@ -351,6 +357,19 @@ config INTEL_MENLOW
 
 	  If unsure, say N.
 
+config EEEPC_LAPTOP
+	tristate "Eee PC Hotkey Driver (EXPERIMENTAL)"
+	depends on X86
+	depends on ACPI
+	depends on BACKLIGHT_CLASS_DEVICE
+	depends on HWMON
+	depends on EXPERIMENTAL
+	---help---
+	  This driver supports the Fn-Fx keys on Eee PC laptops.
+	  It also adds the ability to switch camera/wlan on/off.
+
+	  If you have an Eee PC laptop, say Y or M here.
+
 config ENCLOSURE_SERVICES
 	tristate "Enclosure Services"
 	default n
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index 5914da43485..1952875a272 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -7,7 +7,8 @@ obj-$(CONFIG_IBM_ASM)		+= ibmasm/
 obj-$(CONFIG_HDPU_FEATURES)	+= hdpuftrs/
 obj-$(CONFIG_MSI_LAPTOP)     += msi-laptop.o
 obj-$(CONFIG_ACER_WMI)     += acer-wmi.o
-obj-$(CONFIG_ASUS_LAPTOP)     += asus-laptop.o
+obj-$(CONFIG_ASUS_LAPTOP)	+= asus-laptop.o
+obj-$(CONFIG_EEEPC_LAPTOP)	+= eeepc-laptop.o
 obj-$(CONFIG_ATMEL_PWM)		+= atmel_pwm.o
 obj-$(CONFIG_ATMEL_SSC)		+= atmel-ssc.o
 obj-$(CONFIG_ATMEL_TCLIB)	+= atmel_tclib.o
diff --git a/drivers/misc/eeepc-laptop.c b/drivers/misc/eeepc-laptop.c
new file mode 100644
index 00000000000..6d727609097
--- /dev/null
+++ b/drivers/misc/eeepc-laptop.c
@@ -0,0 +1,666 @@
+/*
+ *  eepc-laptop.c - Asus Eee PC extras
+ *
+ *  Based on asus_acpi.c as patched for the Eee PC by Asus:
+ *  ftp://ftp.asus.com/pub/ASUS/EeePC/701/ASUS_ACPI_071126.rar
+ *  Based on eee.c from eeepc-linux
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/platform_device.h>
+#include <linux/backlight.h>
+#include <linux/fb.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <acpi/acpi_drivers.h>
+#include <acpi/acpi_bus.h>
+#include <linux/uaccess.h>
+
+#define EEEPC_LAPTOP_VERSION	"0.1"
+
+#define EEEPC_HOTK_NAME		"Eee PC Hotkey Driver"
+#define EEEPC_HOTK_FILE		"eeepc"
+#define EEEPC_HOTK_CLASS	"hotkey"
+#define EEEPC_HOTK_DEVICE_NAME	"Hotkey"
+#define EEEPC_HOTK_HID		"ASUS010"
+
+#define EEEPC_LOG	EEEPC_HOTK_FILE ": "
+#define EEEPC_ERR	KERN_ERR	EEEPC_LOG
+#define EEEPC_WARNING	KERN_WARNING	EEEPC_LOG
+#define EEEPC_NOTICE	KERN_NOTICE	EEEPC_LOG
+#define EEEPC_INFO	KERN_INFO	EEEPC_LOG
+
+/*
+ * Definitions for Asus EeePC
+ */
+#define	NOTIFY_WLAN_ON	0x10
+#define NOTIFY_BRN_MIN	0x20
+#define NOTIFY_BRN_MAX	0x2f
+
+enum {
+	DISABLE_ASL_WLAN = 0x0001,
+	DISABLE_ASL_BLUETOOTH = 0x0002,
+	DISABLE_ASL_IRDA = 0x0004,
+	DISABLE_ASL_CAMERA = 0x0008,
+	DISABLE_ASL_TV = 0x0010,
+	DISABLE_ASL_GPS = 0x0020,
+	DISABLE_ASL_DISPLAYSWITCH = 0x0040,
+	DISABLE_ASL_MODEM = 0x0080,
+	DISABLE_ASL_CARDREADER = 0x0100
+};
+
+enum {
+	CM_ASL_WLAN = 0,
+	CM_ASL_BLUETOOTH,
+	CM_ASL_IRDA,
+	CM_ASL_1394,
+	CM_ASL_CAMERA,
+	CM_ASL_TV,
+	CM_ASL_GPS,
+	CM_ASL_DVDROM,
+	CM_ASL_DISPLAYSWITCH,
+	CM_ASL_PANELBRIGHT,
+	CM_ASL_BIOSFLASH,
+	CM_ASL_ACPIFLASH,
+	CM_ASL_CPUFV,
+	CM_ASL_CPUTEMPERATURE,
+	CM_ASL_FANCPU,
+	CM_ASL_FANCHASSIS,
+	CM_ASL_USBPORT1,
+	CM_ASL_USBPORT2,
+	CM_ASL_USBPORT3,
+	CM_ASL_MODEM,
+	CM_ASL_CARDREADER,
+	CM_ASL_LID
+};
+
+const char *cm_getv[] = {
+	"WLDG", NULL, NULL, NULL,
+	"CAMG", NULL, NULL, NULL,
+	NULL, "PBLG", NULL, NULL,
+	"CFVG", NULL, NULL, NULL,
+	"USBG", NULL, NULL, "MODG",
+	"CRDG", "LIDG"
+};
+
+const char *cm_setv[] = {
+	"WLDS", NULL, NULL, NULL,
+	"CAMS", NULL, NULL, NULL,
+	"SDSP", "PBLS", "HDPS", NULL,
+	"CFVS", NULL, NULL, NULL,
+	"USBG", NULL, NULL, "MODS",
+	"CRDS", NULL
+};
+
+#define EEEPC_EC	"\\_SB.PCI0.SBRG.EC0."
+
+#define EEEPC_EC_FAN_PWM	EEEPC_EC "SC02" /* Fan PWM duty cycle (%) */
+#define EEEPC_EC_SC02		0x63
+#define EEEPC_EC_FAN_HRPM	EEEPC_EC "SC05" /* High byte, fan speed (RPM) */
+#define EEEPC_EC_FAN_LRPM	EEEPC_EC "SC06" /* Low byte, fan speed (RPM) */
+#define EEEPC_EC_FAN_CTRL	EEEPC_EC "SFB3" /* Byte containing SF25  */
+#define EEEPC_EC_SFB3		0xD3
+
+/*
+ * This is the main structure, we can use it to store useful information
+ * about the hotk device
+ */
+struct eeepc_hotk {
+	struct acpi_device *device;	/* the device we are in */
+	acpi_handle handle;		/* the handle of the hotk device */
+	u32 cm_supported;		/* the control methods supported
+					   by this BIOS */
+	uint init_flag;			/* Init flags */
+	u16 event_count[128];		/* count for each event */
+};
+
+/* The actual device the driver binds to */
+static struct eeepc_hotk *ehotk;
+
+/* Platform device/driver */
+static struct platform_driver platform_driver = {
+	.driver = {
+		.name = EEEPC_HOTK_FILE,
+		.owner = THIS_MODULE,
+	}
+};
+
+static struct platform_device *platform_device;
+
+/*
+ * The hotkey driver declaration
+ */
+static int eeepc_hotk_add(struct acpi_device *device);
+static int eeepc_hotk_remove(struct acpi_device *device, int type);
+
+static const struct acpi_device_id eeepc_device_ids[] = {
+	{EEEPC_HOTK_HID, 0},
+	{"", 0},
+};
+MODULE_DEVICE_TABLE(acpi, eeepc_device_ids);
+
+static struct acpi_driver eeepc_hotk_driver = {
+	.name = EEEPC_HOTK_NAME,
+	.class = EEEPC_HOTK_CLASS,
+	.ids = eeepc_device_ids,
+	.ops = {
+		.add = eeepc_hotk_add,
+		.remove = eeepc_hotk_remove,
+	},
+};
+
+/* The backlight device /sys/class/backlight */
+static struct backlight_device *eeepc_backlight_device;
+
+/* The hwmon device */
+static struct device *eeepc_hwmon_device;
+
+/*
+ * The backlight class declaration
+ */
+static int read_brightness(struct backlight_device *bd);
+static int update_bl_status(struct backlight_device *bd);
+static struct backlight_ops eeepcbl_ops = {
+	.get_brightness = read_brightness,
+	.update_status = update_bl_status,
+};
+
+MODULE_AUTHOR("Corentin Chary, Eric Cooper");
+MODULE_DESCRIPTION(EEEPC_HOTK_NAME);
+MODULE_LICENSE("GPL");
+
+/*
+ * ACPI Helpers
+ */
+static int write_acpi_int(acpi_handle handle, const char *method, int val,
+			  struct acpi_buffer *output)
+{
+	struct acpi_object_list params;
+	union acpi_object in_obj;
+	acpi_status status;
+
+	params.count = 1;
+	params.pointer = &in_obj;
+	in_obj.type = ACPI_TYPE_INTEGER;
+	in_obj.integer.value = val;
+
+	status = acpi_evaluate_object(handle, (char *)method, &params, output);
+	return (status == AE_OK ? 0 : -1);
+}
+
+static int read_acpi_int(acpi_handle handle, const char *method, int *val)
+{
+	acpi_status status;
+	ulong result;
+
+	status = acpi_evaluate_integer(handle, (char *)method, NULL, &result);
+	if (ACPI_FAILURE(status)) {
+		*val = -1;
+		return -1;
+	} else {
+		*val = result;
+		return 0;
+	}
+}
+
+static int set_acpi(int cm, int value)
+{
+	if (ehotk->cm_supported & (0x1 << cm)) {
+		const char *method = cm_setv[cm];
+		if (method == NULL)
+			return -ENODEV;
+		if (write_acpi_int(ehotk->handle, method, value, NULL))
+			printk(EEEPC_WARNING "Error writing %s\n", method);
+	}
+	return 0;
+}
+
+static int get_acpi(int cm)
+{
+	int value = -1;
+	if ((ehotk->cm_supported & (0x1 << cm))) {
+		const char *method = cm_getv[cm];
+		if (method == NULL)
+			return -ENODEV;
+		if (read_acpi_int(ehotk->handle, method, &value))
+			printk(EEEPC_WARNING "Error reading %s\n", method);
+	}
+	return value;
+}
+
+/*
+ * Backlight
+ */
+static int read_brightness(struct backlight_device *bd)
+{
+	return get_acpi(CM_ASL_PANELBRIGHT);
+}
+
+static int set_brightness(struct backlight_device *bd, int value)
+{
+	value = max(0, min(15, value));
+	return set_acpi(CM_ASL_PANELBRIGHT, value);
+}
+
+static int update_bl_status(struct backlight_device *bd)
+{
+	return set_brightness(bd, bd->props.brightness);
+}
+
+/*
+ * Sys helpers
+ */
+static int parse_arg(const char *buf, unsigned long count, int *val)
+{
+	if (!count)
+		return 0;
+	if (sscanf(buf, "%i", val) != 1)
+		return -EINVAL;
+	return count;
+}
+
+static ssize_t store_sys_acpi(int cm, const char *buf, size_t count)
+{
+	int rv, value;
+
+	rv = parse_arg(buf, count, &value);
+	if (rv > 0)
+		set_acpi(cm, value);
+	return rv;
+}
+
+static ssize_t show_sys_acpi(int cm, char *buf)
+{
+	return sprintf(buf, "%d\n", get_acpi(cm));
+}
+
+#define EEEPC_CREATE_DEVICE_ATTR(_name, _cm)				\
+	static ssize_t show_##_name(struct device *dev,			\
+				    struct device_attribute *attr,	\
+				    char *buf)				\
+	{								\
+		return show_sys_acpi(_cm, buf);				\
+	}								\
+	static ssize_t store_##_name(struct device *dev,		\
+				     struct device_attribute *attr,	\
+				     const char *buf, size_t count)	\
+	{								\
+		return store_sys_acpi(_cm, buf, count);			\
+	}								\
+	static struct device_attribute dev_attr_##_name = {		\
+		.attr = {						\
+			.name = __stringify(_name),			\
+			.mode = 0644 },					\
+		.show   = show_##_name,					\
+		.store  = store_##_name,				\
+	}
+
+EEEPC_CREATE_DEVICE_ATTR(camera, CM_ASL_CAMERA);
+EEEPC_CREATE_DEVICE_ATTR(cardr, CM_ASL_CARDREADER);
+EEEPC_CREATE_DEVICE_ATTR(disp, CM_ASL_DISPLAYSWITCH);
+EEEPC_CREATE_DEVICE_ATTR(wlan, CM_ASL_WLAN);
+
+static struct attribute *platform_attributes[] = {
+	&dev_attr_camera.attr,
+	&dev_attr_cardr.attr,
+	&dev_attr_disp.attr,
+	&dev_attr_wlan.attr,
+	NULL
+};
+
+static struct attribute_group platform_attribute_group = {
+	.attrs = platform_attributes
+};
+
+/*
+ * Hotkey functions
+ */
+static int eeepc_hotk_check(void)
+{
+	struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
+	int result;
+
+	result = acpi_bus_get_status(ehotk->device);
+	if (result)
+		return result;
+	if (ehotk->device->status.present) {
+		if (write_acpi_int(ehotk->handle, "INIT", ehotk->init_flag,
+				    &buffer)) {
+			printk(EEEPC_ERR "Hotkey initialization failed\n");
+			return -ENODEV;
+		} else {
+			printk(EEEPC_NOTICE "Hotkey init flags 0x%x\n",
+			       ehotk->init_flag);
+		}
+		/* get control methods supported */
+		if (read_acpi_int(ehotk->handle, "CMSG"
+				   , &ehotk->cm_supported)) {
+			printk(EEEPC_ERR
+			       "Get control methods supported failed\n");
+			return -ENODEV;
+		} else {
+			printk(EEEPC_INFO
+			       "Get control methods supported: 0x%x\n",
+			       ehotk->cm_supported);
+		}
+	} else {
+		printk(EEEPC_ERR "Hotkey device not present, aborting\n");
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static void notify_wlan(u32 *event)
+{
+	/* if DISABLE_ASL_WLAN is set, the notify code for fn+f2
+	   will always be 0x10 */
+	if (ehotk->cm_supported & (0x1 << CM_ASL_WLAN)) {
+		const char *method = cm_getv[CM_ASL_WLAN];
+		int value;
+		if (read_acpi_int(ehotk->handle, method, &value))
+			printk(EEEPC_WARNING "Error reading %s\n",
+			       method);
+		else if (value == 1)
+			*event = 0x11;
+	}
+}
+
+static void notify_brn(void)
+{
+	struct backlight_device *bd = eeepc_backlight_device;
+	bd->props.brightness = read_brightness(bd);
+}
+
+static void eeepc_hotk_notify(acpi_handle handle, u32 event, void *data)
+{
+	if (!ehotk)
+		return;
+	if (event == NOTIFY_WLAN_ON && (DISABLE_ASL_WLAN & ehotk->init_flag))
+		notify_wlan(&event);
+	if (event >= NOTIFY_BRN_MIN && event <= NOTIFY_BRN_MAX)
+		notify_brn();
+	acpi_bus_generate_proc_event(ehotk->device, event,
+				     ehotk->event_count[event % 128]++);
+}
+
+static int eeepc_hotk_add(struct acpi_device *device)
+{
+	acpi_status status = AE_OK;
+	int result;
+
+	if (!device)
+		 return -EINVAL;
+	printk(EEEPC_NOTICE EEEPC_HOTK_NAME "\n");
+	ehotk = kzalloc(sizeof(struct eeepc_hotk), GFP_KERNEL);
+	if (!ehotk)
+		return -ENOMEM;
+	ehotk->init_flag = DISABLE_ASL_WLAN | DISABLE_ASL_DISPLAYSWITCH;
+	ehotk->handle = device->handle;
+	strcpy(acpi_device_name(device), EEEPC_HOTK_DEVICE_NAME);
+	strcpy(acpi_device_class(device), EEEPC_HOTK_CLASS);
+	acpi_driver_data(device) = ehotk;
+	ehotk->device = device;
+	result = eeepc_hotk_check();
+	if (result)
+		goto end;
+	status = acpi_install_notify_handler(ehotk->handle, ACPI_SYSTEM_NOTIFY,
+					     eeepc_hotk_notify, ehotk);
+	if (ACPI_FAILURE(status))
+		printk(EEEPC_ERR "Error installing notify handler\n");
+ end:
+	if (result) {
+		kfree(ehotk);
+		ehotk = NULL;
+	}
+	return result;
+}
+
+static int eeepc_hotk_remove(struct acpi_device *device, int type)
+{
+	acpi_status status = 0;
+
+	if (!device || !acpi_driver_data(device))
+		 return -EINVAL;
+	status = acpi_remove_notify_handler(ehotk->handle, ACPI_SYSTEM_NOTIFY,
+					    eeepc_hotk_notify);
+	if (ACPI_FAILURE(status))
+		printk(EEEPC_ERR "Error removing notify handler\n");
+	kfree(ehotk);
+	return 0;
+}
+
+/*
+ * Hwmon
+ */
+static int eeepc_get_fan_pwm(void)
+{
+	int value = 0;
+
+	read_acpi_int(NULL, EEEPC_EC_FAN_PWM, &value);
+	return (value);
+}
+
+static void eeepc_set_fan_pwm(int value)
+{
+	value = SENSORS_LIMIT(value, 0, 100);
+	ec_write(EEEPC_EC_SC02, value);
+}
+
+static int eeepc_get_fan_rpm(void)
+{
+	int high = 0;
+	int low = 0;
+
+	read_acpi_int(NULL, EEEPC_EC_FAN_HRPM, &high);
+	read_acpi_int(NULL, EEEPC_EC_FAN_LRPM, &low);
+	return (high << 8 | low);
+}
+
+static int eeepc_get_fan_ctrl(void)
+{
+	int value = 0;
+
+	read_acpi_int(NULL, EEEPC_EC_FAN_CTRL, &value);
+	return ((value & 0x02 ? 1 : 0));
+}
+
+static void eeepc_set_fan_ctrl(int manual)
+{
+	int value = 0;
+
+	read_acpi_int(NULL, EEEPC_EC_FAN_CTRL, &value);
+	if (manual)
+		value |= 0x02;
+	else
+		value &= ~0x02;
+	ec_write(EEEPC_EC_SFB3, value);
+}
+
+static ssize_t store_sys_hwmon(void (*set)(int), const char *buf, size_t count)
+{
+	int rv, value;
+
+	rv = parse_arg(buf, count, &value);
+	if (rv > 0)
+		set(value);
+	return rv;
+}
+
+static ssize_t show_sys_hwmon(int (*get)(void), char *buf)
+{
+	return sprintf(buf, "%d\n", get());
+}
+
+#define EEEPC_CREATE_SENSOR_ATTR(_name, _mode, _set, _get)		\
+	static ssize_t show_##_name(struct device *dev,			\
+				    struct device_attribute *attr,	\
+				    char *buf)				\
+	{								\
+		return show_sys_hwmon(_set, buf);			\
+	}								\
+	static ssize_t store_##_name(struct device *dev,		\
+				     struct device_attribute *attr,	\
+				     const char *buf, size_t count)	\
+	{								\
+		return store_sys_hwmon(_get, buf, count);		\
+	}								\
+	static SENSOR_DEVICE_ATTR(_name, _mode, show_##_name, store_##_name, 0);
+
+EEEPC_CREATE_SENSOR_ATTR(fan1_input, S_IRUGO, eeepc_get_fan_rpm, NULL);
+EEEPC_CREATE_SENSOR_ATTR(fan1_pwm, S_IRUGO | S_IWUSR,
+			 eeepc_get_fan_pwm, eeepc_set_fan_pwm);
+EEEPC_CREATE_SENSOR_ATTR(pwm1_enable, S_IRUGO | S_IWUSR,
+			 eeepc_get_fan_ctrl, eeepc_set_fan_ctrl);
+
+static struct attribute *hwmon_attributes[] = {
+	&sensor_dev_attr_fan1_pwm.dev_attr.attr,
+	&sensor_dev_attr_fan1_input.dev_attr.attr,
+	&sensor_dev_attr_pwm1_enable.dev_attr.attr,
+	NULL
+};
+
+static struct attribute_group hwmon_attribute_group = {
+	.attrs = hwmon_attributes
+};
+
+/*
+ * exit/init
+ */
+static void eeepc_backlight_exit(void)
+{
+	if (eeepc_backlight_device)
+		backlight_device_unregister(eeepc_backlight_device);
+	eeepc_backlight_device = NULL;
+}
+
+static void eeepc_hwmon_exit(void)
+{
+	struct device *hwmon;
+
+	hwmon = eeepc_hwmon_device;
+	if (!hwmon)
+		return ;
+	hwmon_device_unregister(hwmon);
+	sysfs_remove_group(&hwmon->kobj,
+			   &hwmon_attribute_group);
+	eeepc_hwmon_device = NULL;
+}
+
+static void __exit eeepc_laptop_exit(void)
+{
+	eeepc_backlight_exit();
+	eeepc_hwmon_exit();
+	acpi_bus_unregister_driver(&eeepc_hotk_driver);
+	sysfs_remove_group(&platform_device->dev.kobj,
+			   &platform_attribute_group);
+	platform_device_unregister(platform_device);
+	platform_driver_unregister(&platform_driver);
+}
+
+static int eeepc_backlight_init(struct device *dev)
+{
+	struct backlight_device *bd;
+
+	bd = backlight_device_register(EEEPC_HOTK_FILE, dev,
+				       NULL, &eeepcbl_ops);
+	if (IS_ERR(bd)) {
+		printk(EEEPC_ERR
+		       "Could not register eeepc backlight device\n");
+		eeepc_backlight_device = NULL;
+		return PTR_ERR(bd);
+	}
+	eeepc_backlight_device = bd;
+	bd->props.max_brightness = 15;
+	bd->props.brightness = read_brightness(NULL);
+	bd->props.power = FB_BLANK_UNBLANK;
+	backlight_update_status(bd);
+	return 0;
+}
+
+static int eeepc_hwmon_init(struct device *dev)
+{
+	struct device *hwmon;
+	int result;
+
+	hwmon = hwmon_device_register(dev);
+	if (IS_ERR(hwmon)) {
+		printk(EEEPC_ERR
+		       "Could not register eeepc hwmon device\n");
+		eeepc_hwmon_device = NULL;
+		return PTR_ERR(hwmon);
+	}
+	eeepc_hwmon_device = hwmon;
+	result = sysfs_create_group(&hwmon->kobj,
+				    &hwmon_attribute_group);
+	if (result)
+		eeepc_hwmon_exit();
+	return result;
+}
+
+static int __init eeepc_laptop_init(void)
+{
+	struct device *dev;
+	int result;
+
+	if (acpi_disabled)
+		return -ENODEV;
+	result = acpi_bus_register_driver(&eeepc_hotk_driver);
+	if (result < 0)
+		return result;
+	if (!ehotk) {
+		acpi_bus_unregister_driver(&eeepc_hotk_driver);
+		return -ENODEV;
+	}
+	dev = acpi_get_physical_device(ehotk->device->handle);
+	result = eeepc_backlight_init(dev);
+	if (result)
+		goto fail_backlight;
+	result = eeepc_hwmon_init(dev);
+	if (result)
+		goto fail_hwmon;
+	/* Register platform stuff */
+	result = platform_driver_register(&platform_driver);
+	if (result)
+		goto fail_platform_driver;
+	platform_device = platform_device_alloc(EEEPC_HOTK_FILE, -1);
+	if (!platform_device) {
+		result = -ENOMEM;
+		goto fail_platform_device1;
+	}
+	result = platform_device_add(platform_device);
+	if (result)
+		goto fail_platform_device2;
+	result = sysfs_create_group(&platform_device->dev.kobj,
+				    &platform_attribute_group);
+	if (result)
+		goto fail_sysfs;
+	return 0;
+fail_sysfs:
+	platform_device_del(platform_device);
+fail_platform_device2:
+	platform_device_put(platform_device);
+fail_platform_device1:
+	platform_driver_unregister(&platform_driver);
+fail_platform_driver:
+	eeepc_hwmon_exit();
+fail_hwmon:
+	eeepc_backlight_exit();
+fail_backlight:
+	return result;
+}
+
+module_init(eeepc_laptop_init);
+module_exit(eeepc_laptop_exit);
diff --git a/drivers/misc/thinkpad_acpi.c b/drivers/misc/thinkpad_acpi.c
index 6cb781262f9..3f28f6eabdb 100644
--- a/drivers/misc/thinkpad_acpi.c
+++ b/drivers/misc/thinkpad_acpi.c
@@ -21,7 +21,7 @@
  *  02110-1301, USA.
  */
 
-#define TPACPI_VERSION "0.19"
+#define TPACPI_VERSION "0.20"
 #define TPACPI_SYSFS_VERSION 0x020200
 
 /*
@@ -67,6 +67,7 @@
 #include <linux/hwmon.h>
 #include <linux/hwmon-sysfs.h>
 #include <linux/input.h>
+#include <linux/leds.h>
 #include <asm/uaccess.h>
 
 #include <linux/dmi.h>
@@ -85,6 +86,8 @@
 #define TP_CMOS_VOLUME_MUTE	2
 #define TP_CMOS_BRIGHTNESS_UP	4
 #define TP_CMOS_BRIGHTNESS_DOWN	5
+#define TP_CMOS_THINKLIGHT_ON	12
+#define TP_CMOS_THINKLIGHT_OFF	13
 
 /* NVRAM Addresses */
 enum tp_nvram_addr {
@@ -133,8 +136,12 @@ enum {
 #define TPACPI_PROC_DIR "ibm"
 #define TPACPI_ACPI_EVENT_PREFIX "ibm"
 #define TPACPI_DRVR_NAME TPACPI_FILE
+#define TPACPI_DRVR_SHORTNAME "tpacpi"
 #define TPACPI_HWMON_DRVR_NAME TPACPI_NAME "_hwmon"
 
+#define TPACPI_NVRAM_KTHREAD_NAME "ktpacpi_nvramd"
+#define TPACPI_WORKQUEUE_NAME "ktpacpid"
+
 #define TPACPI_MAX_ACPI_ARGS 3
 
 /* Debugging */
@@ -225,6 +232,7 @@ static struct {
 	u32 light:1;
 	u32 light_status:1;
 	u32 bright_16levels:1;
+	u32 bright_acpimode:1;
 	u32 wan:1;
 	u32 fan_ctrl_status_undef:1;
 	u32 input_device_registered:1;
@@ -236,6 +244,11 @@ static struct {
 	u32 hotkey_poll_active:1;
 } tp_features;
 
+static struct {
+	u16 hotkey_mask_ff:1;
+	u16 bright_cmos_ec_unsync:1;
+} tp_warned;
+
 struct thinkpad_id_data {
 	unsigned int vendor;	/* ThinkPad vendor:
 				 * PCI_VENDOR_ID_IBM/PCI_VENDOR_ID_LENOVO */
@@ -246,7 +259,8 @@ struct thinkpad_id_data {
 	u16 bios_model;		/* Big Endian, TP-1Y = 0x5931, 0 = unknown */
 	u16 ec_model;
 
-	char *model_str;
+	char *model_str;	/* ThinkPad T43 */
+	char *nummodel_str;	/* 9384A9C for a 9384-A9C model */
 };
 static struct thinkpad_id_data thinkpad_id;
 
@@ -259,6 +273,16 @@ static enum {
 static int experimental;
 static u32 dbg_level;
 
+static struct workqueue_struct *tpacpi_wq;
+
+/* Special LED class that can defer work */
+struct tpacpi_led_classdev {
+	struct led_classdev led_classdev;
+	struct work_struct work;
+	enum led_brightness new_brightness;
+	unsigned int led;
+};
+
 /****************************************************************************
  ****************************************************************************
  *
@@ -807,6 +831,80 @@ static int parse_strtoul(const char *buf,
 	return 0;
 }
 
+static int __init tpacpi_query_bcl_levels(acpi_handle handle)
+{
+	struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
+	union acpi_object *obj;
+	int rc;
+
+	if (ACPI_SUCCESS(acpi_evaluate_object(handle, NULL, NULL, &buffer))) {
+		obj = (union acpi_object *)buffer.pointer;
+		if (!obj || (obj->type != ACPI_TYPE_PACKAGE)) {
+			printk(TPACPI_ERR "Unknown _BCL data, "
+			       "please report this to %s\n", TPACPI_MAIL);
+			rc = 0;
+		} else {
+			rc = obj->package.count;
+		}
+	} else {
+		return 0;
+	}
+
+	kfree(buffer.pointer);
+	return rc;
+}
+
+static acpi_status __init tpacpi_acpi_walk_find_bcl(acpi_handle handle,
+					u32 lvl, void *context, void **rv)
+{
+	char name[ACPI_PATH_SEGMENT_LENGTH];
+	struct acpi_buffer buffer = { sizeof(name), &name };
+
+	if (ACPI_SUCCESS(acpi_get_name(handle, ACPI_SINGLE_NAME, &buffer)) &&
+	    !strncmp("_BCL", name, sizeof(name) - 1)) {
+		BUG_ON(!rv || !*rv);
+		**(int **)rv = tpacpi_query_bcl_levels(handle);
+		return AE_CTRL_TERMINATE;
+	} else {
+		return AE_OK;
+	}
+}
+
+/*
+ * Returns 0 (no ACPI _BCL or _BCL invalid), or size of brightness map
+ */
+static int __init tpacpi_check_std_acpi_brightness_support(void)
+{
+	int status;
+	int bcl_levels = 0;
+	void *bcl_ptr = &bcl_levels;
+
+	if (!vid_handle) {
+		TPACPI_ACPIHANDLE_INIT(vid);
+	}
+	if (!vid_handle)
+		return 0;
+
+	/*
+	 * Search for a _BCL method, and execute it.  This is safe on all
+	 * ThinkPads, and as a side-effect, _BCL will place a Lenovo Vista
+	 * BIOS in ACPI backlight control mode.  We do NOT have to care
+	 * about calling the _BCL method in an enabled video device, any
+	 * will do for our purposes.
+	 */
+
+	status = acpi_walk_namespace(ACPI_TYPE_METHOD, vid_handle, 3,
+				     tpacpi_acpi_walk_find_bcl, NULL,
+				     &bcl_ptr);
+
+	if (ACPI_SUCCESS(status) && bcl_levels > 2) {
+		tp_features.bright_acpimode = 1;
+		return (bcl_levels - 2);
+	}
+
+	return 0;
+}
+
 /*************************************************************************
  * thinkpad-acpi driver attributes
  */
@@ -909,12 +1007,14 @@ static int __init thinkpad_acpi_driver_init(struct ibm_init_struct *iibm)
 			thinkpad_id.ec_version_str : "unknown");
 
 	if (thinkpad_id.vendor && thinkpad_id.model_str)
-		printk(TPACPI_INFO "%s %s\n",
+		printk(TPACPI_INFO "%s %s, model %s\n",
 			(thinkpad_id.vendor == PCI_VENDOR_ID_IBM) ?
 				"IBM" : ((thinkpad_id.vendor ==
 						PCI_VENDOR_ID_LENOVO) ?
 					"Lenovo" : "Unknown vendor"),
-			thinkpad_id.model_str);
+			thinkpad_id.model_str,
+			(thinkpad_id.nummodel_str) ?
+				thinkpad_id.nummodel_str : "unknown");
 
 	return 0;
 }
@@ -1107,6 +1207,19 @@ static int hotkey_mask_set(u32 mask)
 	int rc = 0;
 
 	if (tp_features.hotkey_mask) {
+		if (!tp_warned.hotkey_mask_ff &&
+		    (mask == 0xffff || mask == 0xffffff ||
+		     mask == 0xffffffff)) {
+			tp_warned.hotkey_mask_ff = 1;
+			printk(TPACPI_NOTICE
+			       "setting the hotkey mask to 0x%08x is likely "
+			       "not the best way to go about it\n", mask);
+			printk(TPACPI_NOTICE
+			       "please consider using the driver defaults, "
+			       "and refer to up-to-date thinkpad-acpi "
+			       "documentation\n");
+		}
+
 		HOTKEY_CONFIG_CRITICAL_START
 		for (i = 0; i < 32; i++) {
 			u32 m = 1 << i;
@@ -1427,8 +1540,7 @@ static void hotkey_poll_setup(int may_warn)
 	    (tpacpi_inputdev->users > 0 || hotkey_report_mode < 2)) {
 		if (!tpacpi_hotkey_task) {
 			tpacpi_hotkey_task = kthread_run(hotkey_kthread,
-							 NULL,
-							 TPACPI_FILE "d");
+					NULL, TPACPI_NVRAM_KTHREAD_NAME);
 			if (IS_ERR(tpacpi_hotkey_task)) {
 				tpacpi_hotkey_task = NULL;
 				printk(TPACPI_ERR
@@ -1887,6 +1999,9 @@ static int __init hotkey_init(struct ibm_init_struct *iibm)
 		KEY_UNKNOWN,	/* 0x0D: FN+INSERT */
 		KEY_UNKNOWN,	/* 0x0E: FN+DELETE */
 
+		/* These either have to go through ACPI video, or
+		 * act like in the IBM ThinkPads, so don't ever
+		 * enable them by default */
 		KEY_RESERVED,	/* 0x0F: FN+HOME (brightness up) */
 		KEY_RESERVED,	/* 0x10: FN+END (brightness down) */
 
@@ -2091,6 +2206,32 @@ static int __init hotkey_init(struct ibm_init_struct *iibm)
 			set_bit(SW_TABLET_MODE, tpacpi_inputdev->swbit);
 		}
 
+		/* Do not issue duplicate brightness change events to
+		 * userspace */
+		if (!tp_features.bright_acpimode)
+			/* update bright_acpimode... */
+			tpacpi_check_std_acpi_brightness_support();
+
+		if (tp_features.bright_acpimode) {
+			printk(TPACPI_INFO
+			       "This ThinkPad has standard ACPI backlight "
+			       "brightness control, supported by the ACPI "
+			       "video driver\n");
+			printk(TPACPI_NOTICE
+			       "Disabling thinkpad-acpi brightness events "
+			       "by default...\n");
+
+			/* The hotkey_reserved_mask change below is not
+			 * necessary while the keys are at KEY_RESERVED in the
+			 * default map, but better safe than sorry, leave it
+			 * here as a marker of what we have to do, especially
+			 * when we finally become able to set this at runtime
+			 * on response to X.org requests */
+			hotkey_reserved_mask |=
+				(1 << TP_ACPI_HOTKEYSCAN_FNHOME)
+				| (1 << TP_ACPI_HOTKEYSCAN_FNEND);
+		}
+
 		dbg_printk(TPACPI_DBG_INIT,
 				"enabling hot key handling\n");
 		res = hotkey_status_set(1);
@@ -3110,13 +3251,82 @@ static struct ibm_struct video_driver_data = {
 TPACPI_HANDLE(lght, root, "\\LGHT");	/* A21e, A2xm/p, T20-22, X20-21 */
 TPACPI_HANDLE(ledb, ec, "LEDB");		/* G4x */
 
+static int light_get_status(void)
+{
+	int status = 0;
+
+	if (tp_features.light_status) {
+		if (!acpi_evalf(ec_handle, &status, "KBLT", "d"))
+			return -EIO;
+		return (!!status);
+	}
+
+	return -ENXIO;
+}
+
+static int light_set_status(int status)
+{
+	int rc;
+
+	if (tp_features.light) {
+		if (cmos_handle) {
+			rc = acpi_evalf(cmos_handle, NULL, NULL, "vd",
+					(status)?
+						TP_CMOS_THINKLIGHT_ON :
+						TP_CMOS_THINKLIGHT_OFF);
+		} else {
+			rc = acpi_evalf(lght_handle, NULL, NULL, "vd",
+					(status)? 1 : 0);
+		}
+		return (rc)? 0 : -EIO;
+	}
+
+	return -ENXIO;
+}
+
+static void light_set_status_worker(struct work_struct *work)
+{
+	struct tpacpi_led_classdev *data =
+			container_of(work, struct tpacpi_led_classdev, work);
+
+	if (likely(tpacpi_lifecycle == TPACPI_LIFE_RUNNING))
+		light_set_status((data->new_brightness != LED_OFF));
+}
+
+static void light_sysfs_set(struct led_classdev *led_cdev,
+			enum led_brightness brightness)
+{
+	struct tpacpi_led_classdev *data =
+		container_of(led_cdev,
+			     struct tpacpi_led_classdev,
+			     led_classdev);
+	data->new_brightness = brightness;
+	queue_work(tpacpi_wq, &data->work);
+}
+
+static enum led_brightness light_sysfs_get(struct led_classdev *led_cdev)
+{
+	return (light_get_status() == 1)? LED_FULL : LED_OFF;
+}
+
+static struct tpacpi_led_classdev tpacpi_led_thinklight = {
+	.led_classdev = {
+		.name		= "tpacpi::thinklight",
+		.brightness_set	= &light_sysfs_set,
+		.brightness_get	= &light_sysfs_get,
+	}
+};
+
 static int __init light_init(struct ibm_init_struct *iibm)
 {
+	int rc = 0;
+
 	vdbg_printk(TPACPI_DBG_INIT, "initializing light subdriver\n");
 
 	TPACPI_ACPIHANDLE_INIT(ledb);
 	TPACPI_ACPIHANDLE_INIT(lght);
 	TPACPI_ACPIHANDLE_INIT(cmos);
+	INIT_WORK(&tpacpi_led_thinklight.work, light_set_status_worker);
 
 	/* light not supported on 570, 600e/x, 770e, 770x, G4x, R30, R31 */
 	tp_features.light = (cmos_handle || lght_handle) && !ledb_handle;
@@ -3130,13 +3340,31 @@ static int __init light_init(struct ibm_init_struct *iibm)
 	vdbg_printk(TPACPI_DBG_INIT, "light is %s\n",
 		str_supported(tp_features.light));
 
-	return (tp_features.light)? 0 : 1;
+	if (tp_features.light) {
+		rc = led_classdev_register(&tpacpi_pdev->dev,
+					   &tpacpi_led_thinklight.led_classdev);
+	}
+
+	if (rc < 0) {
+		tp_features.light = 0;
+		tp_features.light_status = 0;
+	} else {
+		rc = (tp_features.light)? 0 : 1;
+	}
+	return rc;
+}
+
+static void light_exit(void)
+{
+	led_classdev_unregister(&tpacpi_led_thinklight.led_classdev);
+	if (work_pending(&tpacpi_led_thinklight.work))
+		flush_workqueue(tpacpi_wq);
 }
 
 static int light_read(char *p)
 {
 	int len = 0;
-	int status = 0;
+	int status;
 
 	if (!tp_features.light) {
 		len += sprintf(p + len, "status:\t\tnot supported\n");
@@ -3144,8 +3372,9 @@ static int light_read(char *p)
 		len += sprintf(p + len, "status:\t\tunknown\n");
 		len += sprintf(p + len, "commands:\ton, off\n");
 	} else {
-		if (!acpi_evalf(ec_handle, &status, "KBLT", "d"))
-			return -EIO;
+		status = light_get_status();
+		if (status < 0)
+			return status;
 		len += sprintf(p + len, "status:\t\t%s\n", onoff(status, 0));
 		len += sprintf(p + len, "commands:\ton, off\n");
 	}
@@ -3155,37 +3384,29 @@ static int light_read(char *p)
 
 static int light_write(char *buf)
 {
-	int cmos_cmd, lght_cmd;
 	char *cmd;
-	int success;
+	int newstatus = 0;
 
 	if (!tp_features.light)
 		return -ENODEV;
 
 	while ((cmd = next_cmd(&buf))) {
 		if (strlencmp(cmd, "on") == 0) {
-			cmos_cmd = 0x0c;
-			lght_cmd = 1;
+			newstatus = 1;
 		} else if (strlencmp(cmd, "off") == 0) {
-			cmos_cmd = 0x0d;
-			lght_cmd = 0;
+			newstatus = 0;
 		} else
 			return -EINVAL;
-
-		success = cmos_handle ?
-		    acpi_evalf(cmos_handle, NULL, NULL, "vd", cmos_cmd) :
-		    acpi_evalf(lght_handle, NULL, NULL, "vd", lght_cmd);
-		if (!success)
-			return -EIO;
 	}
 
-	return 0;
+	return light_set_status(newstatus);
 }
 
 static struct ibm_struct light_driver_data = {
 	.name = "light",
 	.read = light_read,
 	.write = light_write,
+	.exit = light_exit,
 };
 
 /*************************************************************************
@@ -3583,6 +3804,12 @@ enum {	/* For TPACPI_LED_OLD */
 	TPACPI_LED_EC_HLMS = 0x0e,	/* EC reg to select led to command */
 };
 
+enum led_status_t {
+	TPACPI_LED_OFF = 0,
+	TPACPI_LED_ON,
+	TPACPI_LED_BLINK,
+};
+
 static enum led_access_mode led_supported;
 
 TPACPI_HANDLE(led, ec, "SLED",	/* 570 */
@@ -3591,8 +3818,174 @@ TPACPI_HANDLE(led, ec, "SLED",	/* 570 */
 	   "LED",		/* all others */
 	   );			/* R30, R31 */
 
+#define TPACPI_LED_NUMLEDS 8
+static struct tpacpi_led_classdev *tpacpi_leds;
+static enum led_status_t tpacpi_led_state_cache[TPACPI_LED_NUMLEDS];
+static const char const *tpacpi_led_names[TPACPI_LED_NUMLEDS] = {
+	/* there's a limit of 19 chars + NULL before 2.6.26 */
+	"tpacpi::power",
+	"tpacpi:orange:batt",
+	"tpacpi:green:batt",
+	"tpacpi::dock_active",
+	"tpacpi::bay_active",
+	"tpacpi::dock_batt",
+	"tpacpi::unknown_led",
+	"tpacpi::standby",
+};
+
+static int led_get_status(unsigned int led)
+{
+	int status;
+	enum led_status_t led_s;
+
+	switch (led_supported) {
+	case TPACPI_LED_570:
+		if (!acpi_evalf(ec_handle,
+				&status, "GLED", "dd", 1 << led))
+			return -EIO;
+		led_s = (status == 0)?
+				TPACPI_LED_OFF :
+				((status == 1)?
+					TPACPI_LED_ON :
+					TPACPI_LED_BLINK);
+		tpacpi_led_state_cache[led] = led_s;
+		return led_s;
+	default:
+		return -ENXIO;
+	}
+
+	/* not reached */
+}
+
+static int led_set_status(unsigned int led, enum led_status_t ledstatus)
+{
+	/* off, on, blink. Index is led_status_t */
+	static const int const led_sled_arg1[] = { 0, 1, 3 };
+	static const int const led_exp_hlbl[] = { 0, 0, 1 };	/* led# * */
+	static const int const led_exp_hlcl[] = { 0, 1, 1 };	/* led# * */
+	static const int const led_led_arg1[] = { 0, 0x80, 0xc0 };
+
+	int rc = 0;
+
+	switch (led_supported) {
+	case TPACPI_LED_570:
+			/* 570 */
+			led = 1 << led;
+			if (!acpi_evalf(led_handle, NULL, NULL, "vdd",
+					led, led_sled_arg1[ledstatus]))
+				rc = -EIO;
+			break;
+	case TPACPI_LED_OLD:
+			/* 600e/x, 770e, 770x, A21e, A2xm/p, T20-22, X20 */
+			led = 1 << led;
+			rc = ec_write(TPACPI_LED_EC_HLMS, led);
+			if (rc >= 0)
+				rc = ec_write(TPACPI_LED_EC_HLBL,
+					      led * led_exp_hlbl[ledstatus]);
+			if (rc >= 0)
+				rc = ec_write(TPACPI_LED_EC_HLCL,
+					      led * led_exp_hlcl[ledstatus]);
+			break;
+	case TPACPI_LED_NEW:
+			/* all others */
+			if (!acpi_evalf(led_handle, NULL, NULL, "vdd",
+					led, led_led_arg1[ledstatus]))
+				rc = -EIO;
+			break;
+	default:
+		rc = -ENXIO;
+	}
+
+	if (!rc)
+		tpacpi_led_state_cache[led] = ledstatus;
+
+	return rc;
+}
+
+static void led_sysfs_set_status(unsigned int led,
+				 enum led_brightness brightness)
+{
+	led_set_status(led,
+			(brightness == LED_OFF) ?
+			TPACPI_LED_OFF :
+			(tpacpi_led_state_cache[led] == TPACPI_LED_BLINK) ?
+				TPACPI_LED_BLINK : TPACPI_LED_ON);
+}
+
+static void led_set_status_worker(struct work_struct *work)
+{
+	struct tpacpi_led_classdev *data =
+		container_of(work, struct tpacpi_led_classdev, work);
+
+	if (likely(tpacpi_lifecycle == TPACPI_LIFE_RUNNING))
+		led_sysfs_set_status(data->led, data->new_brightness);
+}
+
+static void led_sysfs_set(struct led_classdev *led_cdev,
+			enum led_brightness brightness)
+{
+	struct tpacpi_led_classdev *data = container_of(led_cdev,
+			     struct tpacpi_led_classdev, led_classdev);
+
+	data->new_brightness = brightness;
+	queue_work(tpacpi_wq, &data->work);
+}
+
+static int led_sysfs_blink_set(struct led_classdev *led_cdev,
+			unsigned long *delay_on, unsigned long *delay_off)
+{
+	struct tpacpi_led_classdev *data = container_of(led_cdev,
+			     struct tpacpi_led_classdev, led_classdev);
+
+	/* Can we choose the flash rate? */
+	if (*delay_on == 0 && *delay_off == 0) {
+		/* yes. set them to the hardware blink rate (1 Hz) */
+		*delay_on = 500; /* ms */
+		*delay_off = 500; /* ms */
+	} else if ((*delay_on != 500) || (*delay_off != 500))
+		return -EINVAL;
+
+	data->new_brightness = TPACPI_LED_BLINK;
+	queue_work(tpacpi_wq, &data->work);
+
+	return 0;
+}
+
+static enum led_brightness led_sysfs_get(struct led_classdev *led_cdev)
+{
+	int rc;
+
+	struct tpacpi_led_classdev *data = container_of(led_cdev,
+			     struct tpacpi_led_classdev, led_classdev);
+
+	rc = led_get_status(data->led);
+
+	if (rc == TPACPI_LED_OFF || rc < 0)
+		rc = LED_OFF;	/* no error handling in led class :( */
+	else
+		rc = LED_FULL;
+
+	return rc;
+}
+
+static void led_exit(void)
+{
+	unsigned int i;
+
+	for (i = 0; i < TPACPI_LED_NUMLEDS; i++) {
+		if (tpacpi_leds[i].led_classdev.name)
+			led_classdev_unregister(&tpacpi_leds[i].led_classdev);
+	}
+
+	kfree(tpacpi_leds);
+	tpacpi_leds = NULL;
+}
+
 static int __init led_init(struct ibm_init_struct *iibm)
 {
+	unsigned int i;
+	int rc;
+
 	vdbg_printk(TPACPI_DBG_INIT, "initializing LED subdriver\n");
 
 	TPACPI_ACPIHANDLE_INIT(led);
@@ -3613,10 +4006,41 @@ static int __init led_init(struct ibm_init_struct *iibm)
 	vdbg_printk(TPACPI_DBG_INIT, "LED commands are %s, mode %d\n",
 		str_supported(led_supported), led_supported);
 
+	tpacpi_leds = kzalloc(sizeof(*tpacpi_leds) * TPACPI_LED_NUMLEDS,
+			      GFP_KERNEL);
+	if (!tpacpi_leds) {
+		printk(TPACPI_ERR "Out of memory for LED data\n");
+		return -ENOMEM;
+	}
+
+	for (i = 0; i < TPACPI_LED_NUMLEDS; i++) {
+		tpacpi_leds[i].led = i;
+
+		tpacpi_leds[i].led_classdev.brightness_set = &led_sysfs_set;
+		tpacpi_leds[i].led_classdev.blink_set = &led_sysfs_blink_set;
+		if (led_supported == TPACPI_LED_570)
+			tpacpi_leds[i].led_classdev.brightness_get =
+							&led_sysfs_get;
+
+		tpacpi_leds[i].led_classdev.name = tpacpi_led_names[i];
+
+		INIT_WORK(&tpacpi_leds[i].work, led_set_status_worker);
+
+		rc = led_classdev_register(&tpacpi_pdev->dev,
+					   &tpacpi_leds[i].led_classdev);
+		if (rc < 0) {
+			tpacpi_leds[i].led_classdev.name = NULL;
+			led_exit();
+			return rc;
+		}
+	}
+
 	return (led_supported != TPACPI_LED_NONE)? 0 : 1;
 }
 
-#define led_status(s) ((s) == 0 ? "off" : ((s) == 1 ? "on" : "blinking"))
+#define str_led_status(s) \
+	((s) == TPACPI_LED_OFF ? "off" : \
+		((s) == TPACPI_LED_ON ? "on" : "blinking"))
 
 static int led_read(char *p)
 {
@@ -3632,11 +4056,11 @@ static int led_read(char *p)
 		/* 570 */
 		int i, status;
 		for (i = 0; i < 8; i++) {
-			if (!acpi_evalf(ec_handle,
-					&status, "GLED", "dd", 1 << i))
+			status = led_get_status(i);
+			if (status < 0)
 				return -EIO;
 			len += sprintf(p + len, "%d:\t\t%s\n",
-				       i, led_status(status));
+				       i, str_led_status(status));
 		}
 	}
 
@@ -3646,16 +4070,11 @@ static int led_read(char *p)
 	return len;
 }
 
-/* off, on, blink */
-static const int led_sled_arg1[] = { 0, 1, 3 };
-static const int led_exp_hlbl[] = { 0, 0, 1 };	/* led# * */
-static const int led_exp_hlcl[] = { 0, 1, 1 };	/* led# * */
-static const int led_led_arg1[] = { 0, 0x80, 0xc0 };
-
 static int led_write(char *buf)
 {
 	char *cmd;
-	int led, ind, ret;
+	int led, rc;
+	enum led_status_t s;
 
 	if (!led_supported)
 		return -ENODEV;
@@ -3665,38 +4084,18 @@ static int led_write(char *buf)
 			return -EINVAL;
 
 		if (strstr(cmd, "off")) {
-			ind = 0;
+			s = TPACPI_LED_OFF;
 		} else if (strstr(cmd, "on")) {
-			ind = 1;
+			s = TPACPI_LED_ON;
 		} else if (strstr(cmd, "blink")) {
-			ind = 2;
-		} else
-			return -EINVAL;
-
-		if (led_supported == TPACPI_LED_570) {
-			/* 570 */
-			led = 1 << led;
-			if (!acpi_evalf(led_handle, NULL, NULL, "vdd",
-					led, led_sled_arg1[ind]))
-				return -EIO;
-		} else if (led_supported == TPACPI_LED_OLD) {
-			/* 600e/x, 770e, 770x, A21e, A2xm/p, T20-22, X20 */
-			led = 1 << led;
-			ret = ec_write(TPACPI_LED_EC_HLMS, led);
-			if (ret >= 0)
-				ret = ec_write(TPACPI_LED_EC_HLBL,
-						led * led_exp_hlbl[ind]);
-			if (ret >= 0)
-				ret = ec_write(TPACPI_LED_EC_HLCL,
-						led * led_exp_hlcl[ind]);
-			if (ret < 0)
-				return ret;
+			s = TPACPI_LED_BLINK;
 		} else {
-			/* all others */
-			if (!acpi_evalf(led_handle, NULL, NULL, "vdd",
-					led, led_led_arg1[ind]))
-				return -EIO;
+			return -EINVAL;
 		}
+
+		rc = led_set_status(led, s);
+		if (rc < 0)
+			return rc;
 	}
 
 	return 0;
@@ -3706,6 +4105,7 @@ static struct ibm_struct led_driver_data = {
 	.name = "led",
 	.read = led_read,
 	.write = led_write,
+	.exit = led_exit,
 };
 
 /*************************************************************************
@@ -4170,8 +4570,16 @@ static struct ibm_struct ecdump_driver_data = {
 
 #define TPACPI_BACKLIGHT_DEV_NAME "thinkpad_screen"
 
+enum {
+	TP_EC_BACKLIGHT = 0x31,
+
+	/* TP_EC_BACKLIGHT bitmasks */
+	TP_EC_BACKLIGHT_LVLMSK = 0x1F,
+	TP_EC_BACKLIGHT_CMDMSK = 0xE0,
+	TP_EC_BACKLIGHT_MAPSW = 0x20,
+};
+
 static struct backlight_device *ibm_backlight_device;
-static int brightness_offset = 0x31;
 static int brightness_mode;
 static unsigned int brightness_enable = 2; /* 2 = auto, 0 = no, 1 = yes */
 
@@ -4180,16 +4588,24 @@ static struct mutex brightness_mutex;
 /*
  * ThinkPads can read brightness from two places: EC 0x31, or
  * CMOS NVRAM byte 0x5E, bits 0-3.
+ *
+ * EC 0x31 has the following layout
+ *   Bit 7: unknown function
+ *   Bit 6: unknown function
+ *   Bit 5: Z: honour scale changes, NZ: ignore scale changes
+ *   Bit 4: must be set to zero to avoid problems
+ *   Bit 3-0: backlight brightness level
+ *
+ * brightness_get_raw returns status data in the EC 0x31 layout
  */
-static int brightness_get(struct backlight_device *bd)
+static int brightness_get_raw(int *status)
 {
 	u8 lec = 0, lcmos = 0, level = 0;
 
 	if (brightness_mode & 1) {
-		if (!acpi_ec_read(brightness_offset, &lec))
+		if (!acpi_ec_read(TP_EC_BACKLIGHT, &lec))
 			return -EIO;
-		lec &= (tp_features.bright_16levels)? 0x0f : 0x07;
-		level = lec;
+		level = lec & TP_EC_BACKLIGHT_LVLMSK;
 	};
 	if (brightness_mode & 2) {
 		lcmos = (nvram_read_byte(TP_NVRAM_ADDR_BRIGHTNESS)
@@ -4199,16 +4615,27 @@ static int brightness_get(struct backlight_device *bd)
 		level = lcmos;
 	}
 
-	if (brightness_mode == 3 && lec != lcmos) {
-		printk(TPACPI_ERR
-			"CMOS NVRAM (%u) and EC (%u) do not agree "
-			"on display brightness level\n",
-			(unsigned int) lcmos,
-			(unsigned int) lec);
-		return -EIO;
+	if (brightness_mode == 3) {
+		*status = lec;	/* Prefer EC, CMOS is just a backing store */
+		lec &= TP_EC_BACKLIGHT_LVLMSK;
+		if (lec == lcmos)
+			tp_warned.bright_cmos_ec_unsync = 0;
+		else {
+			if (!tp_warned.bright_cmos_ec_unsync) {
+				printk(TPACPI_ERR
+					"CMOS NVRAM (%u) and EC (%u) do not "
+					"agree on display brightness level\n",
+					(unsigned int) lcmos,
+					(unsigned int) lec);
+				tp_warned.bright_cmos_ec_unsync = 1;
+			}
+			return -EIO;
+		}
+	} else {
+		*status = level;
 	}
 
-	return level;
+	return 0;
 }
 
 /* May return EINTR which can always be mapped to ERESTARTSYS */
@@ -4216,19 +4643,22 @@ static int brightness_set(int value)
 {
 	int cmos_cmd, inc, i, res;
 	int current_value;
+	int command_bits;
 
-	if (value > ((tp_features.bright_16levels)? 15 : 7))
+	if (value > ((tp_features.bright_16levels)? 15 : 7) ||
+	    value < 0)
 		return -EINVAL;
 
 	res = mutex_lock_interruptible(&brightness_mutex);
 	if (res < 0)
 		return res;
 
-	current_value = brightness_get(NULL);
-	if (current_value < 0) {
-		res = current_value;
+	res = brightness_get_raw(&current_value);
+	if (res < 0)
 		goto errout;
-	}
+
+	command_bits = current_value & TP_EC_BACKLIGHT_CMDMSK;
+	current_value &= TP_EC_BACKLIGHT_LVLMSK;
 
 	cmos_cmd = value > current_value ?
 			TP_CMOS_BRIGHTNESS_UP :
@@ -4243,7 +4673,8 @@ static int brightness_set(int value)
 			goto errout;
 		}
 		if ((brightness_mode & 1) &&
-		    !acpi_ec_write(brightness_offset, i + inc)) {
+		    !acpi_ec_write(TP_EC_BACKLIGHT,
+				   (i + inc) | command_bits)) {
 			res = -EIO;
 			goto errout;;
 		}
@@ -4266,106 +4697,23 @@ static int brightness_update_status(struct backlight_device *bd)
 				bd->props.brightness : 0);
 }
 
-static struct backlight_ops ibm_backlight_data = {
-	.get_brightness = brightness_get,
-	.update_status  = brightness_update_status,
-};
-
-/* --------------------------------------------------------------------- */
-
-static int __init tpacpi_query_bcll_levels(acpi_handle handle)
-{
-	struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
-	union acpi_object *obj;
-	int rc;
-
-	if (ACPI_SUCCESS(acpi_evaluate_object(handle, NULL, NULL, &buffer))) {
-		obj = (union acpi_object *)buffer.pointer;
-		if (!obj || (obj->type != ACPI_TYPE_PACKAGE)) {
-			printk(TPACPI_ERR "Unknown BCLL data, "
-			       "please report this to %s\n", TPACPI_MAIL);
-			rc = 0;
-		} else {
-			rc = obj->package.count;
-		}
-	} else {
-		return 0;
-	}
-
-	kfree(buffer.pointer);
-	return rc;
-}
-
-static acpi_status __init brightness_find_bcll(acpi_handle handle, u32 lvl,
-					void *context, void **rv)
-{
-	char name[ACPI_PATH_SEGMENT_LENGTH];
-	struct acpi_buffer buffer = { sizeof(name), &name };
-
-	if (ACPI_SUCCESS(acpi_get_name(handle, ACPI_SINGLE_NAME, &buffer)) &&
-	    !strncmp("BCLL", name, sizeof(name) - 1)) {
-		if (tpacpi_query_bcll_levels(handle) == 16) {
-			*rv = handle;
-			return AE_CTRL_TERMINATE;
-		} else {
-			return AE_OK;
-		}
-	} else {
-		return AE_OK;
-	}
-}
-
-static int __init brightness_check_levels(void)
+static int brightness_get(struct backlight_device *bd)
 {
-	int status;
-	void *found_node = NULL;
+	int status, res;
 
-	if (!vid_handle) {
-		TPACPI_ACPIHANDLE_INIT(vid);
-	}
-	if (!vid_handle)
-		return 0;
-
-	/* Search for a BCLL package with 16 levels */
-	status = acpi_walk_namespace(ACPI_TYPE_PACKAGE, vid_handle, 3,
-					brightness_find_bcll, NULL,
-					&found_node);
-
-	return (ACPI_SUCCESS(status) && found_node != NULL);
-}
-
-static acpi_status __init brightness_find_bcl(acpi_handle handle, u32 lvl,
-					void *context, void **rv)
-{
-	char name[ACPI_PATH_SEGMENT_LENGTH];
-	struct acpi_buffer buffer = { sizeof(name), &name };
+	res = brightness_get_raw(&status);
+	if (res < 0)
+		return 0; /* FIXME: teach backlight about error handling */
 
-	if (ACPI_SUCCESS(acpi_get_name(handle, ACPI_SINGLE_NAME, &buffer)) &&
-	    !strncmp("_BCL", name, sizeof(name) - 1)) {
-		*rv = handle;
-		return AE_CTRL_TERMINATE;
-	} else {
-		return AE_OK;
-	}
+	return status & TP_EC_BACKLIGHT_LVLMSK;
 }
 
-static int __init brightness_check_std_acpi_support(void)
-{
-	int status;
-	void *found_node = NULL;
-
-	if (!vid_handle) {
-		TPACPI_ACPIHANDLE_INIT(vid);
-	}
-	if (!vid_handle)
-		return 0;
-
-	/* Search for a _BCL method, but don't execute it */
-	status = acpi_walk_namespace(ACPI_TYPE_METHOD, vid_handle, 3,
-				     brightness_find_bcl, NULL, &found_node);
+static struct backlight_ops ibm_backlight_data = {
+	.get_brightness = brightness_get,
+	.update_status  = brightness_update_status,
+};
 
-	return (ACPI_SUCCESS(status) && found_node != NULL);
-}
+/* --------------------------------------------------------------------- */
 
 static int __init brightness_init(struct ibm_init_struct *iibm)
 {
@@ -4375,13 +4723,19 @@ static int __init brightness_init(struct ibm_init_struct *iibm)
 
 	mutex_init(&brightness_mutex);
 
-	if (!brightness_enable) {
-		dbg_printk(TPACPI_DBG_INIT,
-			   "brightness support disabled by "
-			   "module parameter\n");
-		return 1;
-	} else if (brightness_enable > 1) {
-		if (brightness_check_std_acpi_support()) {
+	/*
+	 * We always attempt to detect acpi support, so as to switch
+	 * Lenovo Vista BIOS to ACPI brightness mode even if we are not
+	 * going to publish a backlight interface
+	 */
+	b = tpacpi_check_std_acpi_brightness_support();
+	if (b > 0) {
+		if (thinkpad_id.vendor == PCI_VENDOR_ID_LENOVO) {
+			printk(TPACPI_NOTICE
+			       "Lenovo BIOS switched to ACPI backlight "
+			       "control mode\n");
+		}
+		if (brightness_enable > 1) {
 			printk(TPACPI_NOTICE
 			       "standard ACPI backlight interface "
 			       "available, not loading native one...\n");
@@ -4389,6 +4743,22 @@ static int __init brightness_init(struct ibm_init_struct *iibm)
 		}
 	}
 
+	if (!brightness_enable) {
+		dbg_printk(TPACPI_DBG_INIT,
+			   "brightness support disabled by "
+			   "module parameter\n");
+		return 1;
+	}
+
+	if (b > 16) {
+		printk(TPACPI_ERR
+		       "Unsupported brightness interface, "
+		       "please contact %s\n", TPACPI_MAIL);
+		return 1;
+	}
+	if (b == 16)
+		tp_features.bright_16levels = 1;
+
 	if (!brightness_mode) {
 		if (thinkpad_id.vendor == PCI_VENDOR_ID_LENOVO)
 			brightness_mode = 2;
@@ -4402,12 +4772,7 @@ static int __init brightness_init(struct ibm_init_struct *iibm)
 	if (brightness_mode > 3)
 		return -EINVAL;
 
-	tp_features.bright_16levels =
-			thinkpad_id.vendor == PCI_VENDOR_ID_LENOVO &&
-			brightness_check_levels();
-
-	b = brightness_get(NULL);
-	if (b < 0)
+	if (brightness_get_raw(&b) < 0)
 		return 1;
 
 	if (tp_features.bright_16levels)
@@ -4425,7 +4790,7 @@ static int __init brightness_init(struct ibm_init_struct *iibm)
 
 	ibm_backlight_device->props.max_brightness =
 				(tp_features.bright_16levels)? 15 : 7;
-	ibm_backlight_device->props.brightness = b;
+	ibm_backlight_device->props.brightness = b & TP_EC_BACKLIGHT_LVLMSK;
 	backlight_update_status(ibm_backlight_device);
 
 	return 0;
@@ -5046,11 +5411,11 @@ static void fan_watchdog_reset(void)
 	if (fan_watchdog_maxinterval > 0 &&
 	    tpacpi_lifecycle != TPACPI_LIFE_EXITING) {
 		fan_watchdog_active = 1;
-		if (!schedule_delayed_work(&fan_watchdog_task,
+		if (!queue_delayed_work(tpacpi_wq, &fan_watchdog_task,
 				msecs_to_jiffies(fan_watchdog_maxinterval
 						 * 1000))) {
 			printk(TPACPI_ERR
-			       "failed to schedule the fan watchdog, "
+			       "failed to queue the fan watchdog, "
 			       "watchdog will not trigger\n");
 		}
 	} else
@@ -5420,7 +5785,7 @@ static void fan_exit(void)
 			   &driver_attr_fan_watchdog);
 
 	cancel_delayed_work(&fan_watchdog_task);
-	flush_scheduled_work();
+	flush_workqueue(tpacpi_wq);
 }
 
 static int fan_read(char *p)
@@ -5826,10 +6191,13 @@ static void __init get_thinkpad_model_data(struct thinkpad_id_data *tp)
 
 	tp->model_str = kstrdup(dmi_get_system_info(DMI_PRODUCT_VERSION),
 					GFP_KERNEL);
-	if (strnicmp(tp->model_str, "ThinkPad", 8) != 0) {
+	if (tp->model_str && strnicmp(tp->model_str, "ThinkPad", 8) != 0) {
 		kfree(tp->model_str);
 		tp->model_str = NULL;
 	}
+
+	tp->nummodel_str = kstrdup(dmi_get_system_info(DMI_PRODUCT_NAME),
+					GFP_KERNEL);
 }
 
 static int __init probe_for_thinkpad(void)
@@ -6071,6 +6439,9 @@ static void thinkpad_acpi_module_exit(void)
 	if (proc_dir)
 		remove_proc_entry(TPACPI_PROC_DIR, acpi_root_dir);
 
+	if (tpacpi_wq)
+		destroy_workqueue(tpacpi_wq);
+
 	kfree(thinkpad_id.bios_version_str);
 	kfree(thinkpad_id.ec_version_str);
 	kfree(thinkpad_id.model_str);
@@ -6101,6 +6472,12 @@ static int __init thinkpad_acpi_module_init(void)
 	TPACPI_ACPIHANDLE_INIT(ecrd);
 	TPACPI_ACPIHANDLE_INIT(ecwr);
 
+	tpacpi_wq = create_singlethread_workqueue(TPACPI_WORKQUEUE_NAME);
+	if (!tpacpi_wq) {
+		thinkpad_acpi_module_exit();
+		return -ENOMEM;
+	}
+
 	proc_dir = proc_mkdir(TPACPI_PROC_DIR, acpi_root_dir);
 	if (!proc_dir) {
 		printk(TPACPI_ERR
@@ -6223,6 +6600,8 @@ static int __init thinkpad_acpi_module_init(void)
 /* Please remove this in year 2009 */
 MODULE_ALIAS("ibm_acpi");
 
+MODULE_ALIAS(TPACPI_DRVR_SHORTNAME);
+
 /*
  * DMI matching for module autoloading
  *