Merge commit 'v2.6.34-rc6'

Conflicts:
	fs/nfsd/nfs4callback.c

37 files changed, 1374 insertions, 16 deletions

diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index d16af6a423f..0d0d625fece 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -268,6 +268,16 @@ config ISL29003
 	  This driver can also be built as a module.  If so, the module
 	  will be called isl29003.
 
+config SENSORS_TSL2550
+	tristate "Taos TSL2550 ambient light sensor"
+	depends on I2C && SYSFS
+	help
+	  If you say yes here you get support for the Taos TSL2550
+	  ambient light sensor.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called tsl2550.
+
 config EP93XX_PWM
 	tristate "EP93xx PWM support"
 	depends on ARCH_EP93XX
@@ -301,6 +311,22 @@ config TI_DAC7512
 	  This driver can also be built as a module. If so, the module
 	  will be calles ti_dac7512.
 
+config VMWARE_BALLOON
+	tristate "VMware Balloon Driver"
+	depends on X86
+	help
+	  This is VMware physical memory management driver which acts
+	  like a "balloon" that can be inflated to reclaim physical pages
+	  by reserving them in the guest and invalidating them in the
+	  monitor, freeing up the underlying machine pages so they can
+	  be allocated to other guests. The balloon can also be deflated
+	  to allow the guest to use more physical memory.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called vmware_balloon.
+
 source "drivers/misc/c2port/Kconfig"
 source "drivers/misc/eeprom/Kconfig"
 source "drivers/misc/cb710/Kconfig"
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index 049ff2482f3..7b6f7eefdf8 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -21,6 +21,7 @@ obj-$(CONFIG_SGI_GRU)		+= sgi-gru/
 obj-$(CONFIG_CS5535_MFGPT)	+= cs5535-mfgpt.o
 obj-$(CONFIG_HP_ILO)		+= hpilo.o
 obj-$(CONFIG_ISL29003)		+= isl29003.o
+obj-$(CONFIG_SENSORS_TSL2550)	+= tsl2550.o
 obj-$(CONFIG_EP93XX_PWM)	+= ep93xx_pwm.o
 obj-$(CONFIG_DS1682)		+= ds1682.o
 obj-$(CONFIG_TI_DAC7512)	+= ti_dac7512.o
@@ -28,3 +29,4 @@ obj-$(CONFIG_C2PORT)		+= c2port/
 obj-$(CONFIG_IWMC3200TOP)      += iwmc3200top/
 obj-y				+= eeprom/
 obj-y				+= cb710/
+obj-$(CONFIG_VMWARE_BALLOON)	+= vmware_balloon.o
diff --git a/drivers/misc/atmel-ssc.c b/drivers/misc/atmel-ssc.c
index 558bf3f2c27..4afffe610f9 100644
--- a/drivers/misc/atmel-ssc.c
+++ b/drivers/misc/atmel-ssc.c
@@ -15,6 +15,7 @@
 #include <linux/io.h>
 #include <linux/spinlock.h>
 #include <linux/atmel-ssc.h>
+#include <linux/slab.h>
 
 /* Serialize access to ssc_list and user count */
 static DEFINE_SPINLOCK(user_lock);
diff --git a/drivers/misc/atmel_pwm.c b/drivers/misc/atmel_pwm.c
index 6aa5294dfec..0f3fb4f03bd 100644
--- a/drivers/misc/atmel_pwm.c
+++ b/drivers/misc/atmel_pwm.c
@@ -1,6 +1,7 @@
 #include <linux/module.h>
 #include <linux/clk.h>
 #include <linux/err.h>
+#include <linux/slab.h>
 #include <linux/io.h>
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
diff --git a/drivers/misc/atmel_tclib.c b/drivers/misc/atmel_tclib.c
index 05dc8a31f28..3891124001f 100644
--- a/drivers/misc/atmel_tclib.c
+++ b/drivers/misc/atmel_tclib.c
@@ -6,6 +6,7 @@
 #include <linux/ioport.h>
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
+#include <linux/slab.h>
 
 /* Number of bytes to reserve for the iomem resource */
 #define ATMEL_TC_IOMEM_SIZE	256
diff --git a/drivers/misc/c2port/core.c b/drivers/misc/c2port/core.c
index b5346b4db91..ed090e77c9c 100644
--- a/drivers/misc/c2port/core.c
+++ b/drivers/misc/c2port/core.c
@@ -20,6 +20,7 @@
 #include <linux/delay.h>
 #include <linux/idr.h>
 #include <linux/sched.h>
+#include <linux/slab.h>
 
 #include <linux/c2port.h>
 
@@ -912,8 +913,8 @@ struct c2port_device *c2port_device_register(char *name,
 
 	c2dev->dev = device_create(c2port_class, NULL, 0, c2dev,
 					"c2port%d", id);
-	if (unlikely(!c2dev->dev)) {
-		ret = -ENOMEM;
+	if (unlikely(IS_ERR(c2dev->dev))) {
+		ret = PTR_ERR(c2dev->dev);
 		goto error_device_create;
 	}
 	dev_set_drvdata(c2dev->dev, c2dev);
diff --git a/drivers/misc/cb710/core.c b/drivers/misc/cb710/core.c
index b14eab0f2ba..efec4139c3f 100644
--- a/drivers/misc/cb710/core.c
+++ b/drivers/misc/cb710/core.c
@@ -9,11 +9,11 @@
  */
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/slab.h>
 #include <linux/pci.h>
 #include <linux/spinlock.h>
 #include <linux/idr.h>
 #include <linux/cb710.h>
+#include <linux/gfp.h>
 
 static DEFINE_IDA(cb710_ida);
 static DEFINE_SPINLOCK(cb710_ida_lock);
diff --git a/drivers/misc/cb710/debug.c b/drivers/misc/cb710/debug.c
index 02358d086e0..fcb3b8e30c5 100644
--- a/drivers/misc/cb710/debug.c
+++ b/drivers/misc/cb710/debug.c
@@ -10,7 +10,6 @@
 #include <linux/cb710.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/slab.h>
 
 #define CB710_REG_COUNT		0x80
 
diff --git a/drivers/misc/cs5535-mfgpt.c b/drivers/misc/cs5535-mfgpt.c
index 8110460558f..9bec24db4d4 100644
--- a/drivers/misc/cs5535-mfgpt.c
+++ b/drivers/misc/cs5535-mfgpt.c
@@ -18,6 +18,7 @@
 #include <linux/module.h>
 #include <linux/pci.h>
 #include <linux/cs5535.h>
+#include <linux/slab.h>
 
 #define DRV_NAME "cs5535-mfgpt"
 #define MFGPT_BAR 2
diff --git a/drivers/misc/ds1682.c b/drivers/misc/ds1682.c
index f3ee4a1abb7..9197cfc5501 100644
--- a/drivers/misc/ds1682.c
+++ b/drivers/misc/ds1682.c
@@ -33,7 +33,6 @@
 
 #include <linux/module.h>
 #include <linux/init.h>
-#include <linux/slab.h>
 #include <linux/i2c.h>
 #include <linux/string.h>
 #include <linux/list.h>
diff --git a/drivers/misc/eeprom/at24.c b/drivers/misc/eeprom/at24.c
index 2cb2736d65a..db7d0f21b65 100644
--- a/drivers/misc/eeprom/at24.c
+++ b/drivers/misc/eeprom/at24.c
@@ -505,6 +505,7 @@ static int at24_probe(struct i2c_client *client, const struct i2c_device_id *id)
 	 * Export the EEPROM bytes through sysfs, since that's convenient.
 	 * By default, only root should see the data (maybe passwords etc)
 	 */
+	sysfs_bin_attr_init(&at24->bin);
 	at24->bin.attr.name = "eeprom";
 	at24->bin.attr.mode = chip.flags & AT24_FLAG_IRUGO ? S_IRUGO : S_IRUSR;
 	at24->bin.read = at24_bin_read;
diff --git a/drivers/misc/eeprom/at25.c b/drivers/misc/eeprom/at25.c
index d902d81dde3..d194212a41f 100644
--- a/drivers/misc/eeprom/at25.c
+++ b/drivers/misc/eeprom/at25.c
@@ -347,6 +347,7 @@ static int at25_probe(struct spi_device *spi)
 	 * that's sensitive for read and/or write, like ethernet addresses,
 	 * security codes, board-specific manufacturing calibrations, etc.
 	 */
+	sysfs_bin_attr_init(&at25->bin);
 	at25->bin.attr.name = "eeprom";
 	at25->bin.attr.mode = S_IRUSR;
 	at25->bin.read = at25_bin_read;
diff --git a/drivers/misc/enclosure.c b/drivers/misc/enclosure.c
index 1eac626e710..48c84a58163 100644
--- a/drivers/misc/enclosure.c
+++ b/drivers/misc/enclosure.c
@@ -27,6 +27,7 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/mutex.h>
+#include <linux/slab.h>
 
 static LIST_HEAD(container_list);
 static DEFINE_MUTEX(container_list_lock);
diff --git a/drivers/misc/ep93xx_pwm.c b/drivers/misc/ep93xx_pwm.c
index ba4694169d7..46b3439673e 100644
--- a/drivers/misc/ep93xx_pwm.c
+++ b/drivers/misc/ep93xx_pwm.c
@@ -19,6 +19,7 @@
 
 #include <linux/module.h>
 #include <linux/platform_device.h>
+#include <linux/slab.h>
 #include <linux/clk.h>
 #include <linux/err.h>
 #include <linux/io.h>
diff --git a/drivers/misc/hpilo.c b/drivers/misc/hpilo.c
index a92a3a742b4..98ad0120aa9 100644
--- a/drivers/misc/hpilo.c
+++ b/drivers/misc/hpilo.c
@@ -25,6 +25,7 @@
 #include <linux/io.h>
 #include <linux/wait.h>
 #include <linux/poll.h>
+#include <linux/slab.h>
 #include "hpilo.h"
 
 static struct class *ilo_class;
diff --git a/drivers/misc/ibmasm/command.c b/drivers/misc/ibmasm/command.c
index e2031739aa2..5c766b4fb23 100644
--- a/drivers/misc/ibmasm/command.c
+++ b/drivers/misc/ibmasm/command.c
@@ -23,6 +23,7 @@
  */
 
 #include <linux/sched.h>
+#include <linux/slab.h>
 #include "ibmasm.h"
 #include "lowlevel.h"
 
diff --git a/drivers/misc/ibmasm/event.c b/drivers/misc/ibmasm/event.c
index 572d41ffc18..76bfda1ffaa 100644
--- a/drivers/misc/ibmasm/event.c
+++ b/drivers/misc/ibmasm/event.c
@@ -23,6 +23,7 @@
  */
 
 #include <linux/sched.h>
+#include <linux/slab.h>
 #include "ibmasm.h"
 #include "lowlevel.h"
 
diff --git a/drivers/misc/ibmasm/ibmasmfs.c b/drivers/misc/ibmasm/ibmasmfs.c
index aecf40ecb3a..8844a3f4538 100644
--- a/drivers/misc/ibmasm/ibmasmfs.c
+++ b/drivers/misc/ibmasm/ibmasmfs.c
@@ -75,6 +75,7 @@
 
 #include <linux/fs.h>
 #include <linux/pagemap.h>
+#include <linux/slab.h>
 #include <asm/uaccess.h>
 #include <asm/io.h>
 #include "ibmasm.h"
diff --git a/drivers/misc/ibmasm/module.c b/drivers/misc/ibmasm/module.c
index dc14b0b9cbf..a234d965243 100644
--- a/drivers/misc/ibmasm/module.c
+++ b/drivers/misc/ibmasm/module.c
@@ -52,6 +52,7 @@
 
 #include <linux/pci.h>
 #include <linux/init.h>
+#include <linux/slab.h>
 #include "ibmasm.h"
 #include "lowlevel.h"
 #include "remote.h"
diff --git a/drivers/misc/ics932s401.c b/drivers/misc/ics932s401.c
index 395a4ea64e9..152e9d93eec 100644
--- a/drivers/misc/ics932s401.c
+++ b/drivers/misc/ics932s401.c
@@ -26,6 +26,7 @@
 #include <linux/mutex.h>
 #include <linux/delay.h>
 #include <linux/log2.h>
+#include <linux/slab.h>
 
 /* Addresses to scan */
 static const unsigned short normal_i2c[] = { 0x69, I2C_CLIENT_END };
diff --git a/drivers/misc/ioc4.c b/drivers/misc/ioc4.c
index 09dcb699e66..193206602d8 100644
--- a/drivers/misc/ioc4.c
+++ b/drivers/misc/ioc4.c
@@ -30,6 +30,7 @@
 #include <linux/pci.h>
 #include <linux/ioc4.h>
 #include <linux/ktime.h>
+#include <linux/slab.h>
 #include <linux/mutex.h>
 #include <linux/time.h>
 #include <asm/io.h>
diff --git a/drivers/misc/iwmc3200top/debugfs.c b/drivers/misc/iwmc3200top/debugfs.c
index 0c8ea0a1c8a..e9eda471f6e 100644
--- a/drivers/misc/iwmc3200top/debugfs.c
+++ b/drivers/misc/iwmc3200top/debugfs.c
@@ -25,6 +25,7 @@
  */
 
 #include <linux/kernel.h>
+#include <linux/slab.h>
 #include <linux/string.h>
 #include <linux/ctype.h>
 #include <linux/mmc/sdio_func.h>
diff --git a/drivers/misc/iwmc3200top/fw-download.c b/drivers/misc/iwmc3200top/fw-download.c
index 9dbaeb574e6..e27afde6e99 100644
--- a/drivers/misc/iwmc3200top/fw-download.c
+++ b/drivers/misc/iwmc3200top/fw-download.c
@@ -26,6 +26,7 @@
 
 #include <linux/firmware.h>
 #include <linux/mmc/sdio_func.h>
+#include <linux/slab.h>
 #include <asm/unaligned.h>
 
 #include "iwmc3200top.h"
diff --git a/drivers/misc/iwmc3200top/log.c b/drivers/misc/iwmc3200top/log.c
index d569279698f..a36a55a49ca 100644
--- a/drivers/misc/iwmc3200top/log.c
+++ b/drivers/misc/iwmc3200top/log.c
@@ -26,6 +26,7 @@
 
 #include <linux/kernel.h>
 #include <linux/mmc/sdio_func.h>
+#include <linux/slab.h>
 #include <linux/ctype.h>
 #include "fw-msg.h"
 #include "iwmc3200top.h"
diff --git a/drivers/misc/iwmc3200top/main.c b/drivers/misc/iwmc3200top/main.c
index 3b7292a5cea..c73cef2c3c5 100644
--- a/drivers/misc/iwmc3200top/main.c
+++ b/drivers/misc/iwmc3200top/main.c
@@ -25,6 +25,7 @@
  */
 
 #include <linux/module.h>
+#include <linux/slab.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/debugfs.h>
diff --git a/drivers/misc/kgdbts.c b/drivers/misc/kgdbts.c
index fcb6ec1af17..72450237a0f 100644
--- a/drivers/misc/kgdbts.c
+++ b/drivers/misc/kgdbts.c
@@ -295,6 +295,10 @@ static int check_and_rewind_pc(char *put_str, char *arg)
 	/* On x86 a breakpoint stop requires it to be decremented */
 	if (addr + 1 == kgdbts_regs.ip)
 		offset = -1;
+#elif defined(CONFIG_SUPERH)
+	/* On SUPERH a breakpoint stop requires it to be decremented */
+	if (addr + 2 == kgdbts_regs.pc)
+		offset = -2;
 #endif
 	if (strcmp(arg, "silent") &&
 		instruction_pointer(&kgdbts_regs) + offset != addr) {
@@ -305,6 +309,8 @@ static int check_and_rewind_pc(char *put_str, char *arg)
 #ifdef CONFIG_X86
 	/* On x86 adjust the instruction pointer if needed */
 	kgdbts_regs.ip += offset;
+#elif defined(CONFIG_SUPERH)
+	kgdbts_regs.pc += offset;
 #endif
 	return 0;
 }
diff --git a/drivers/misc/lkdtm.c b/drivers/misc/lkdtm.c
index 4a0648301fd..31a991161f0 100644
--- a/drivers/misc/lkdtm.c
+++ b/drivers/misc/lkdtm.c
@@ -40,6 +40,7 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/hrtimer.h>
+#include <linux/slab.h>
 #include <scsi/scsi_cmnd.h>
 #include <linux/debugfs.h>
 
diff --git a/drivers/misc/phantom.c b/drivers/misc/phantom.c
index 779aa8ebe4c..75ee0d3f6f4 100644
--- a/drivers/misc/phantom.c
+++ b/drivers/misc/phantom.c
@@ -21,6 +21,7 @@
 #include <linux/poll.h>
 #include <linux/interrupt.h>
 #include <linux/cdev.h>
+#include <linux/slab.h>
 #include <linux/phantom.h>
 #include <linux/sched.h>
 #include <linux/smp_lock.h>
diff --git a/drivers/misc/sgi-gru/grutables.h b/drivers/misc/sgi-gru/grutables.h
index 02a77b8b8ee..7a8b9068ea0 100644
--- a/drivers/misc/sgi-gru/grutables.h
+++ b/drivers/misc/sgi-gru/grutables.h
@@ -516,8 +516,7 @@ struct gru_blade_state {
 
 /* Scan all active GRUs in a GRU bitmap */
 #define for_each_gru_in_bitmap(gid, map)				\
-	for ((gid) = find_first_bit((map), GRU_MAX_GRUS); (gid) < GRU_MAX_GRUS;\
-		(gid)++, (gid) = find_next_bit((map), GRU_MAX_GRUS, (gid)))
+	for_each_set_bit((gid), (map), GRU_MAX_GRUS)
 
 /* Scan all active GRUs on a specific blade */
 #define for_each_gru_on_blade(gru, nid, i)				\
@@ -536,23 +535,17 @@ struct gru_blade_state {
 
 /* Scan each CBR whose bit is set in a TFM (or copy of) */
 #define for_each_cbr_in_tfm(i, map)					\
-	for ((i) = find_first_bit(map, GRU_NUM_CBE);			\
-			(i) < GRU_NUM_CBE;				\
-			(i)++, (i) = find_next_bit(map, GRU_NUM_CBE, i))
+	for_each_set_bit((i), (map), GRU_NUM_CBE)
 
 /* Scan each CBR in a CBR bitmap. Note: multiple CBRs in an allocation unit */
 #define for_each_cbr_in_allocation_map(i, map, k)			\
-	for ((k) = find_first_bit(map, GRU_CBR_AU); (k) < GRU_CBR_AU;	\
-			(k) = find_next_bit(map, GRU_CBR_AU, (k) + 1)) 	\
+	for_each_set_bit((k), (map), GRU_CBR_AU)			\
 		for ((i) = (k)*GRU_CBR_AU_SIZE;				\
 				(i) < ((k) + 1) * GRU_CBR_AU_SIZE; (i)++)
 
 /* Scan each DSR in a DSR bitmap. Note: multiple DSRs in an allocation unit */
 #define for_each_dsr_in_allocation_map(i, map, k)			\
-	for ((k) = find_first_bit((const unsigned long *)map, GRU_DSR_AU);\
-			(k) < GRU_DSR_AU;				\
-			(k) = find_next_bit((const unsigned long *)map,	\
-					  GRU_DSR_AU, (k) + 1))		\
+	for_each_set_bit((k), (const unsigned long *)(map), GRU_DSR_AU)	\
 		for ((i) = (k) * GRU_DSR_AU_CL;				\
 				(i) < ((k) + 1) * GRU_DSR_AU_CL; (i)++)
 
diff --git a/drivers/misc/sgi-xp/xpc_main.c b/drivers/misc/sgi-xp/xpc_main.c
index 832ed4c88cf..8d082b46426 100644
--- a/drivers/misc/sgi-xp/xpc_main.c
+++ b/drivers/misc/sgi-xp/xpc_main.c
@@ -44,6 +44,7 @@
  */
 
 #include <linux/module.h>
+#include <linux/slab.h>
 #include <linux/sysctl.h>
 #include <linux/device.h>
 #include <linux/delay.h>
diff --git a/drivers/misc/sgi-xp/xpc_partition.c b/drivers/misc/sgi-xp/xpc_partition.c
index 9a6268c89fd..d551f09ccb7 100644
--- a/drivers/misc/sgi-xp/xpc_partition.c
+++ b/drivers/misc/sgi-xp/xpc_partition.c
@@ -17,6 +17,7 @@
 
 #include <linux/device.h>
 #include <linux/hardirq.h>
+#include <linux/slab.h>
 #include "xpc.h"
 #include <asm/uv/uv_hub.h>
 
diff --git a/drivers/misc/sgi-xp/xpc_sn2.c b/drivers/misc/sgi-xp/xpc_sn2.c
index 8b70e03f939..7d71c04fc93 100644
--- a/drivers/misc/sgi-xp/xpc_sn2.c
+++ b/drivers/misc/sgi-xp/xpc_sn2.c
@@ -14,6 +14,7 @@
  */
 
 #include <linux/delay.h>
+#include <linux/slab.h>
 #include <asm/uncached.h>
 #include <asm/sn/mspec.h>
 #include <asm/sn/sn_sal.h>
diff --git a/drivers/misc/sgi-xp/xpc_uv.c b/drivers/misc/sgi-xp/xpc_uv.c
index 8725d5e8ab0..1f59ee2226c 100644
--- a/drivers/misc/sgi-xp/xpc_uv.c
+++ b/drivers/misc/sgi-xp/xpc_uv.c
@@ -19,6 +19,7 @@
 #include <linux/delay.h>
 #include <linux/device.h>
 #include <linux/err.h>
+#include <linux/slab.h>
 #include <asm/uv/uv_hub.h>
 #if defined CONFIG_X86_64
 #include <asm/uv/bios.h>
diff --git a/drivers/misc/sgi-xp/xpnet.c b/drivers/misc/sgi-xp/xpnet.c
index 57b152f8d1b..ee5109a3cd9 100644
--- a/drivers/misc/sgi-xp/xpnet.c
+++ b/drivers/misc/sgi-xp/xpnet.c
@@ -20,6 +20,7 @@
  *
  */
 
+#include <linux/slab.h>
 #include <linux/module.h>
 #include <linux/netdevice.h>
 #include <linux/etherdevice.h>
diff --git a/drivers/misc/tifm_core.c b/drivers/misc/tifm_core.c
index 98bcba521da..5f6852dff40 100644
--- a/drivers/misc/tifm_core.c
+++ b/drivers/misc/tifm_core.c
@@ -10,6 +10,7 @@
  */
 
 #include <linux/tifm.h>
+#include <linux/slab.h>
 #include <linux/init.h>
 #include <linux/idr.h>
 
diff --git a/drivers/misc/tsl2550.c b/drivers/misc/tsl2550.c
new file mode 100644
index 00000000000..483ae5f7f68
--- /dev/null
+++ b/drivers/misc/tsl2550.c
@@ -0,0 +1,473 @@
+/*
+ *  tsl2550.c - Linux kernel modules for ambient light sensor
+ *
+ *  Copyright (C) 2007 Rodolfo Giometti <giometti@linux.it>
+ *  Copyright (C) 2007 Eurotech S.p.A. <info@eurotech.it>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/mutex.h>
+
+#define TSL2550_DRV_NAME	"tsl2550"
+#define DRIVER_VERSION		"1.2"
+
+/*
+ * Defines
+ */
+
+#define TSL2550_POWER_DOWN		0x00
+#define TSL2550_POWER_UP		0x03
+#define TSL2550_STANDARD_RANGE		0x18
+#define TSL2550_EXTENDED_RANGE		0x1d
+#define TSL2550_READ_ADC0		0x43
+#define TSL2550_READ_ADC1		0x83
+
+/*
+ * Structs
+ */
+
+struct tsl2550_data {
+	struct i2c_client *client;
+	struct mutex update_lock;
+
+	unsigned int power_state:1;
+	unsigned int operating_mode:1;
+};
+
+/*
+ * Global data
+ */
+
+static const u8 TSL2550_MODE_RANGE[2] = {
+	TSL2550_STANDARD_RANGE, TSL2550_EXTENDED_RANGE,
+};
+
+/*
+ * Management functions
+ */
+
+static int tsl2550_set_operating_mode(struct i2c_client *client, int mode)
+{
+	struct tsl2550_data *data = i2c_get_clientdata(client);
+
+	int ret = i2c_smbus_write_byte(client, TSL2550_MODE_RANGE[mode]);
+
+	data->operating_mode = mode;
+
+	return ret;
+}
+
+static int tsl2550_set_power_state(struct i2c_client *client, int state)
+{
+	struct tsl2550_data *data = i2c_get_clientdata(client);
+	int ret;
+
+	if (state == 0)
+		ret = i2c_smbus_write_byte(client, TSL2550_POWER_DOWN);
+	else {
+		ret = i2c_smbus_write_byte(client, TSL2550_POWER_UP);
+
+		/* On power up we should reset operating mode also... */
+		tsl2550_set_operating_mode(client, data->operating_mode);
+	}
+
+	data->power_state = state;
+
+	return ret;
+}
+
+static int tsl2550_get_adc_value(struct i2c_client *client, u8 cmd)
+{
+	int ret;
+
+	ret = i2c_smbus_read_byte_data(client, cmd);
+	if (ret < 0)
+		return ret;
+	if (!(ret & 0x80))
+		return -EAGAIN;
+	return ret & 0x7f;	/* remove the "valid" bit */
+}
+
+/*
+ * LUX calculation
+ */
+
+#define	TSL2550_MAX_LUX		1846
+
+static const u8 ratio_lut[] = {
+	100, 100, 100, 100, 100, 100, 100, 100,
+	100, 100, 100, 100, 100, 100, 99, 99,
+	99, 99, 99, 99, 99, 99, 99, 99,
+	99, 99, 99, 98, 98, 98, 98, 98,
+	98, 98, 97, 97, 97, 97, 97, 96,
+	96, 96, 96, 95, 95, 95, 94, 94,
+	93, 93, 93, 92, 92, 91, 91, 90,
+	89, 89, 88, 87, 87, 86, 85, 84,
+	83, 82, 81, 80, 79, 78, 77, 75,
+	74, 73, 71, 69, 68, 66, 64, 62,
+	60, 58, 56, 54, 52, 49, 47, 44,
+	42, 41, 40, 40, 39, 39, 38, 38,
+	37, 37, 37, 36, 36, 36, 35, 35,
+	35, 35, 34, 34, 34, 34, 33, 33,
+	33, 33, 32, 32, 32, 32, 32, 31,
+	31, 31, 31, 31, 30, 30, 30, 30,
+	30,
+};
+
+static const u16 count_lut[] = {
+	0, 1, 2, 3, 4, 5, 6, 7,
+	8, 9, 10, 11, 12, 13, 14, 15,
+	16, 18, 20, 22, 24, 26, 28, 30,
+	32, 34, 36, 38, 40, 42, 44, 46,
+	49, 53, 57, 61, 65, 69, 73, 77,
+	81, 85, 89, 93, 97, 101, 105, 109,
+	115, 123, 131, 139, 147, 155, 163, 171,
+	179, 187, 195, 203, 211, 219, 227, 235,
+	247, 263, 279, 295, 311, 327, 343, 359,
+	375, 391, 407, 423, 439, 455, 471, 487,
+	511, 543, 575, 607, 639, 671, 703, 735,
+	767, 799, 831, 863, 895, 927, 959, 991,
+	1039, 1103, 1167, 1231, 1295, 1359, 1423, 1487,
+	1551, 1615, 1679, 1743, 1807, 1871, 1935, 1999,
+	2095, 2223, 2351, 2479, 2607, 2735, 2863, 2991,
+	3119, 3247, 3375, 3503, 3631, 3759, 3887, 4015,
+};
+
+/*
+ * This function is described into Taos TSL2550 Designer's Notebook
+ * pages 2, 3.
+ */
+static int tsl2550_calculate_lux(u8 ch0, u8 ch1)
+{
+	unsigned int lux;
+
+	/* Look up count from channel values */
+	u16 c0 = count_lut[ch0];
+	u16 c1 = count_lut[ch1];
+
+	/*
+	 * Calculate ratio.
+	 * Note: the "128" is a scaling factor
+	 */
+	u8 r = 128;
+
+	/* Avoid division by 0 and count 1 cannot be greater than count 0 */
+	if (c1 <= c0)
+		if (c0) {
+			r = c1 * 128 / c0;
+
+			/* Calculate LUX */
+			lux = ((c0 - c1) * ratio_lut[r]) / 256;
+		} else
+			lux = 0;
+	else
+		return -EAGAIN;
+
+	/* LUX range check */
+	return lux > TSL2550_MAX_LUX ? TSL2550_MAX_LUX : lux;
+}
+
+/*
+ * SysFS support
+ */
+
+static ssize_t tsl2550_show_power_state(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct tsl2550_data *data = i2c_get_clientdata(to_i2c_client(dev));
+
+	return sprintf(buf, "%u\n", data->power_state);
+}
+
+static ssize_t tsl2550_store_power_state(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct tsl2550_data *data = i2c_get_clientdata(client);
+	unsigned long val = simple_strtoul(buf, NULL, 10);
+	int ret;
+
+	if (val < 0 || val > 1)
+		return -EINVAL;
+
+	mutex_lock(&data->update_lock);
+	ret = tsl2550_set_power_state(client, val);
+	mutex_unlock(&data->update_lock);
+
+	if (ret < 0)
+		return ret;
+
+	return count;
+}
+
+static DEVICE_ATTR(power_state, S_IWUSR | S_IRUGO,
+		   tsl2550_show_power_state, tsl2550_store_power_state);
+
+static ssize_t tsl2550_show_operating_mode(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct tsl2550_data *data = i2c_get_clientdata(to_i2c_client(dev));
+
+	return sprintf(buf, "%u\n", data->operating_mode);
+}
+
+static ssize_t tsl2550_store_operating_mode(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct tsl2550_data *data = i2c_get_clientdata(client);
+	unsigned long val = simple_strtoul(buf, NULL, 10);
+	int ret;
+
+	if (val < 0 || val > 1)
+		return -EINVAL;
+
+	if (data->power_state == 0)
+		return -EBUSY;
+
+	mutex_lock(&data->update_lock);
+	ret = tsl2550_set_operating_mode(client, val);
+	mutex_unlock(&data->update_lock);
+
+	if (ret < 0)
+		return ret;
+
+	return count;
+}
+
+static DEVICE_ATTR(operating_mode, S_IWUSR | S_IRUGO,
+		   tsl2550_show_operating_mode, tsl2550_store_operating_mode);
+
+static ssize_t __tsl2550_show_lux(struct i2c_client *client, char *buf)
+{
+	struct tsl2550_data *data = i2c_get_clientdata(client);
+	u8 ch0, ch1;
+	int ret;
+
+	ret = tsl2550_get_adc_value(client, TSL2550_READ_ADC0);
+	if (ret < 0)
+		return ret;
+	ch0 = ret;
+
+	ret = tsl2550_get_adc_value(client, TSL2550_READ_ADC1);
+	if (ret < 0)
+		return ret;
+	ch1 = ret;
+
+	/* Do the job */
+	ret = tsl2550_calculate_lux(ch0, ch1);
+	if (ret < 0)
+		return ret;
+	if (data->operating_mode == 1)
+		ret *= 5;
+
+	return sprintf(buf, "%d\n", ret);
+}
+
+static ssize_t tsl2550_show_lux1_input(struct device *dev,
+			struct device_attribute *attr, char *buf)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct tsl2550_data *data = i2c_get_clientdata(client);
+	int ret;
+
+	/* No LUX data if not operational */
+	if (!data->power_state)
+		return -EBUSY;
+
+	mutex_lock(&data->update_lock);
+	ret = __tsl2550_show_lux(client, buf);
+	mutex_unlock(&data->update_lock);
+
+	return ret;
+}
+
+static DEVICE_ATTR(lux1_input, S_IRUGO,
+		   tsl2550_show_lux1_input, NULL);
+
+static struct attribute *tsl2550_attributes[] = {
+	&dev_attr_power_state.attr,
+	&dev_attr_operating_mode.attr,
+	&dev_attr_lux1_input.attr,
+	NULL
+};
+
+static const struct attribute_group tsl2550_attr_group = {
+	.attrs = tsl2550_attributes,
+};
+
+/*
+ * Initialization function
+ */
+
+static int tsl2550_init_client(struct i2c_client *client)
+{
+	struct tsl2550_data *data = i2c_get_clientdata(client);
+	int err;
+
+	/*
+	 * Probe the chip. To do so we try to power up the device and then to
+	 * read back the 0x03 code
+	 */
+	err = i2c_smbus_read_byte_data(client, TSL2550_POWER_UP);
+	if (err < 0)
+		return err;
+	if (err != TSL2550_POWER_UP)
+		return -ENODEV;
+	data->power_state = 1;
+
+	/* Set the default operating mode */
+	err = i2c_smbus_write_byte(client,
+				   TSL2550_MODE_RANGE[data->operating_mode]);
+	if (err < 0)
+		return err;
+
+	return 0;
+}
+
+/*
+ * I2C init/probing/exit functions
+ */
+
+static struct i2c_driver tsl2550_driver;
+static int __devinit tsl2550_probe(struct i2c_client *client,
+				   const struct i2c_device_id *id)
+{
+	struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
+	struct tsl2550_data *data;
+	int *opmode, err = 0;
+
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WRITE_BYTE
+					    | I2C_FUNC_SMBUS_READ_BYTE_DATA)) {
+		err = -EIO;
+		goto exit;
+	}
+
+	data = kzalloc(sizeof(struct tsl2550_data), GFP_KERNEL);
+	if (!data) {
+		err = -ENOMEM;
+		goto exit;
+	}
+	data->client = client;
+	i2c_set_clientdata(client, data);
+
+	/* Check platform data */
+	opmode = client->dev.platform_data;
+	if (opmode) {
+		if (*opmode < 0 || *opmode > 1) {
+			dev_err(&client->dev, "invalid operating_mode (%d)\n",
+					*opmode);
+			err = -EINVAL;
+			goto exit_kfree;
+		}
+		data->operating_mode = *opmode;
+	} else
+		data->operating_mode = 0;	/* default mode is standard */
+	dev_info(&client->dev, "%s operating mode\n",
+			data->operating_mode ? "extended" : "standard");
+
+	mutex_init(&data->update_lock);
+
+	/* Initialize the TSL2550 chip */
+	err = tsl2550_init_client(client);
+	if (err)
+		goto exit_kfree;
+
+	/* Register sysfs hooks */
+	err = sysfs_create_group(&client->dev.kobj, &tsl2550_attr_group);
+	if (err)
+		goto exit_kfree;
+
+	dev_info(&client->dev, "support ver. %s enabled\n", DRIVER_VERSION);
+
+	return 0;
+
+exit_kfree:
+	kfree(data);
+exit:
+	return err;
+}
+
+static int __devexit tsl2550_remove(struct i2c_client *client)
+{
+	sysfs_remove_group(&client->dev.kobj, &tsl2550_attr_group);
+
+	/* Power down the device */
+	tsl2550_set_power_state(client, 0);
+
+	kfree(i2c_get_clientdata(client));
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+
+static int tsl2550_suspend(struct i2c_client *client, pm_message_t mesg)
+{
+	return tsl2550_set_power_state(client, 0);
+}
+
+static int tsl2550_resume(struct i2c_client *client)
+{
+	return tsl2550_set_power_state(client, 1);
+}
+
+#else
+
+#define tsl2550_suspend		NULL
+#define tsl2550_resume		NULL
+
+#endif /* CONFIG_PM */
+
+static const struct i2c_device_id tsl2550_id[] = {
+	{ "tsl2550", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, tsl2550_id);
+
+static struct i2c_driver tsl2550_driver = {
+	.driver = {
+		.name	= TSL2550_DRV_NAME,
+		.owner	= THIS_MODULE,
+	},
+	.suspend = tsl2550_suspend,
+	.resume	= tsl2550_resume,
+	.probe	= tsl2550_probe,
+	.remove	= __devexit_p(tsl2550_remove),
+	.id_table = tsl2550_id,
+};
+
+static int __init tsl2550_init(void)
+{
+	return i2c_add_driver(&tsl2550_driver);
+}
+
+static void __exit tsl2550_exit(void)
+{
+	i2c_del_driver(&tsl2550_driver);
+}
+
+MODULE_AUTHOR("Rodolfo Giometti <giometti@linux.it>");
+MODULE_DESCRIPTION("TSL2550 ambient light sensor driver");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(DRIVER_VERSION);
+
+module_init(tsl2550_init);
+module_exit(tsl2550_exit);
diff --git a/drivers/misc/vmware_balloon.c b/drivers/misc/vmware_balloon.c
new file mode 100644
index 00000000000..e7161c4e379
--- /dev/null
+++ b/drivers/misc/vmware_balloon.c
@@ -0,0 +1,832 @@
+/*
+ * VMware Balloon driver.
+ *
+ * Copyright (C) 2000-2010, VMware, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; version 2 of the License and no later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT.  See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Maintained by: Dmitry Torokhov <dtor@vmware.com>
+ */
+
+/*
+ * This is VMware physical memory management driver for Linux. The driver
+ * acts like a "balloon" that can be inflated to reclaim physical pages by
+ * reserving them in the guest and invalidating them in the monitor,
+ * freeing up the underlying machine pages so they can be allocated to
+ * other guests.  The balloon can also be deflated to allow the guest to
+ * use more physical memory. Higher level policies can control the sizes
+ * of balloons in VMs in order to manage physical memory resources.
+ */
+
+//#define DEBUG
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/module.h>
+#include <linux/workqueue.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+#include <asm/vmware.h>
+
+MODULE_AUTHOR("VMware, Inc.");
+MODULE_DESCRIPTION("VMware Memory Control (Balloon) Driver");
+MODULE_VERSION("1.2.1.0-K");
+MODULE_ALIAS("dmi:*:svnVMware*:*");
+MODULE_ALIAS("vmware_vmmemctl");
+MODULE_LICENSE("GPL");
+
+/*
+ * Various constants controlling rate of inflaint/deflating balloon,
+ * measured in pages.
+ */
+
+/*
+ * Rate of allocating memory when there is no memory pressure
+ * (driver performs non-sleeping allocations).
+ */
+#define VMW_BALLOON_NOSLEEP_ALLOC_MAX	16384U
+
+/*
+ * Rates of memory allocaton when guest experiences memory pressure
+ * (driver performs sleeping allocations).
+ */
+#define VMW_BALLOON_RATE_ALLOC_MIN	512U
+#define VMW_BALLOON_RATE_ALLOC_MAX	2048U
+#define VMW_BALLOON_RATE_ALLOC_INC	16U
+
+/*
+ * Rates for releasing pages while deflating balloon.
+ */
+#define VMW_BALLOON_RATE_FREE_MIN	512U
+#define VMW_BALLOON_RATE_FREE_MAX	16384U
+#define VMW_BALLOON_RATE_FREE_INC	16U
+
+/*
+ * When guest is under memory pressure, use a reduced page allocation
+ * rate for next several cycles.
+ */
+#define VMW_BALLOON_SLOW_CYCLES		4
+
+/*
+ * Use __GFP_HIGHMEM to allow pages from HIGHMEM zone. We don't
+ * allow wait (__GFP_WAIT) for NOSLEEP page allocations. Use
+ * __GFP_NOWARN, to suppress page allocation failure warnings.
+ */
+#define VMW_PAGE_ALLOC_NOSLEEP		(__GFP_HIGHMEM|__GFP_NOWARN)
+
+/*
+ * Use GFP_HIGHUSER when executing in a separate kernel thread
+ * context and allocation can sleep.  This is less stressful to
+ * the guest memory system, since it allows the thread to block
+ * while memory is reclaimed, and won't take pages from emergency
+ * low-memory pools.
+ */
+#define VMW_PAGE_ALLOC_CANSLEEP		(GFP_HIGHUSER)
+
+/* Maximum number of page allocations without yielding processor */
+#define VMW_BALLOON_YIELD_THRESHOLD	1024
+
+
+/*
+ * Hypervisor communication port definitions.
+ */
+#define VMW_BALLOON_HV_PORT		0x5670
+#define VMW_BALLOON_HV_MAGIC		0x456c6d6f
+#define VMW_BALLOON_PROTOCOL_VERSION	2
+#define VMW_BALLOON_GUEST_ID		1	/* Linux */
+
+#define VMW_BALLOON_CMD_START		0
+#define VMW_BALLOON_CMD_GET_TARGET	1
+#define VMW_BALLOON_CMD_LOCK		2
+#define VMW_BALLOON_CMD_UNLOCK		3
+#define VMW_BALLOON_CMD_GUEST_ID	4
+
+/* error codes */
+#define VMW_BALLOON_SUCCESS		0
+#define VMW_BALLOON_FAILURE		-1
+#define VMW_BALLOON_ERROR_CMD_INVALID	1
+#define VMW_BALLOON_ERROR_PPN_INVALID	2
+#define VMW_BALLOON_ERROR_PPN_LOCKED	3
+#define VMW_BALLOON_ERROR_PPN_UNLOCKED	4
+#define VMW_BALLOON_ERROR_PPN_PINNED	5
+#define VMW_BALLOON_ERROR_PPN_NOTNEEDED	6
+#define VMW_BALLOON_ERROR_RESET		7
+#define VMW_BALLOON_ERROR_BUSY		8
+
+#define VMWARE_BALLOON_CMD(cmd, data, result)		\
+({							\
+	unsigned long __stat, __dummy1, __dummy2;	\
+	__asm__ __volatile__ ("inl (%%dx)" :		\
+		"=a"(__stat),				\
+		"=c"(__dummy1),				\
+		"=d"(__dummy2),				\
+		"=b"(result) :				\
+		"0"(VMW_BALLOON_HV_MAGIC),		\
+		"1"(VMW_BALLOON_CMD_##cmd),		\
+		"2"(VMW_BALLOON_HV_PORT),		\
+		"3"(data) :				\
+		"memory");				\
+	result &= -1UL;					\
+	__stat & -1UL;					\
+})
+
+#ifdef CONFIG_DEBUG_FS
+struct vmballoon_stats {
+	unsigned int timer;
+
+	/* allocation statustics */
+	unsigned int alloc;
+	unsigned int alloc_fail;
+	unsigned int sleep_alloc;
+	unsigned int sleep_alloc_fail;
+	unsigned int refused_alloc;
+	unsigned int refused_free;
+	unsigned int free;
+
+	/* monitor operations */
+	unsigned int lock;
+	unsigned int lock_fail;
+	unsigned int unlock;
+	unsigned int unlock_fail;
+	unsigned int target;
+	unsigned int target_fail;
+	unsigned int start;
+	unsigned int start_fail;
+	unsigned int guest_type;
+	unsigned int guest_type_fail;
+};
+
+#define STATS_INC(stat) (stat)++
+#else
+#define STATS_INC(stat)
+#endif
+
+struct vmballoon {
+
+	/* list of reserved physical pages */
+	struct list_head pages;
+
+	/* transient list of non-balloonable pages */
+	struct list_head refused_pages;
+
+	/* balloon size in pages */
+	unsigned int size;
+	unsigned int target;
+
+	/* reset flag */
+	bool reset_required;
+
+	/* adjustment rates (pages per second) */
+	unsigned int rate_alloc;
+	unsigned int rate_free;
+
+	/* slowdown page allocations for next few cycles */
+	unsigned int slow_allocation_cycles;
+
+#ifdef CONFIG_DEBUG_FS
+	/* statistics */
+	struct vmballoon_stats stats;
+
+	/* debugfs file exporting statistics */
+	struct dentry *dbg_entry;
+#endif
+
+	struct sysinfo sysinfo;
+
+	struct delayed_work dwork;
+};
+
+static struct vmballoon balloon;
+static struct workqueue_struct *vmballoon_wq;
+
+/*
+ * Send "start" command to the host, communicating supported version
+ * of the protocol.
+ */
+static bool vmballoon_send_start(struct vmballoon *b)
+{
+	unsigned long status, dummy;
+
+	STATS_INC(b->stats.start);
+
+	status = VMWARE_BALLOON_CMD(START, VMW_BALLOON_PROTOCOL_VERSION, dummy);
+	if (status == VMW_BALLOON_SUCCESS)
+		return true;
+
+	pr_debug("%s - failed, hv returns %ld\n", __func__, status);
+	STATS_INC(b->stats.start_fail);
+	return false;
+}
+
+static bool vmballoon_check_status(struct vmballoon *b, unsigned long status)
+{
+	switch (status) {
+	case VMW_BALLOON_SUCCESS:
+		return true;
+
+	case VMW_BALLOON_ERROR_RESET:
+		b->reset_required = true;
+		/* fall through */
+
+	default:
+		return false;
+	}
+}
+
+/*
+ * Communicate guest type to the host so that it can adjust ballooning
+ * algorithm to the one most appropriate for the guest. This command
+ * is normally issued after sending "start" command and is part of
+ * standard reset sequence.
+ */
+static bool vmballoon_send_guest_id(struct vmballoon *b)
+{
+	unsigned long status, dummy;
+
+	status = VMWARE_BALLOON_CMD(GUEST_ID, VMW_BALLOON_GUEST_ID, dummy);
+
+	STATS_INC(b->stats.guest_type);
+
+	if (vmballoon_check_status(b, status))
+		return true;
+
+	pr_debug("%s - failed, hv returns %ld\n", __func__, status);
+	STATS_INC(b->stats.guest_type_fail);
+	return false;
+}
+
+/*
+ * Retrieve desired balloon size from the host.
+ */
+static bool vmballoon_send_get_target(struct vmballoon *b, u32 *new_target)
+{
+	unsigned long status;
+	unsigned long target;
+	unsigned long limit;
+	u32 limit32;
+
+	/*
+	 * si_meminfo() is cheap. Moreover, we want to provide dynamic
+	 * max balloon size later. So let us call si_meminfo() every
+	 * iteration.
+	 */
+	si_meminfo(&b->sysinfo);
+	limit = b->sysinfo.totalram;
+
+	/* Ensure limit fits in 32-bits */
+	limit32 = (u32)limit;
+	if (limit != limit32)
+		return false;
+
+	/* update stats */
+	STATS_INC(b->stats.target);
+
+	status = VMWARE_BALLOON_CMD(GET_TARGET, limit, target);
+	if (vmballoon_check_status(b, status)) {
+		*new_target = target;
+		return true;
+	}
+
+	pr_debug("%s - failed, hv returns %ld\n", __func__, status);
+	STATS_INC(b->stats.target_fail);
+	return false;
+}
+
+/*
+ * Notify the host about allocated page so that host can use it without
+ * fear that guest will need it. Host may reject some pages, we need to
+ * check the return value and maybe submit a different page.
+ */
+static bool vmballoon_send_lock_page(struct vmballoon *b, unsigned long pfn)
+{
+	unsigned long status, dummy;
+	u32 pfn32;
+
+	pfn32 = (u32)pfn;
+	if (pfn32 != pfn)
+		return false;
+
+	STATS_INC(b->stats.lock);
+
+	status = VMWARE_BALLOON_CMD(LOCK, pfn, dummy);
+	if (vmballoon_check_status(b, status))
+		return true;
+
+	pr_debug("%s - ppn %lx, hv returns %ld\n", __func__, pfn, status);
+	STATS_INC(b->stats.lock_fail);
+	return false;
+}
+
+/*
+ * Notify the host that guest intends to release given page back into
+ * the pool of available (to the guest) pages.
+ */
+static bool vmballoon_send_unlock_page(struct vmballoon *b, unsigned long pfn)
+{
+	unsigned long status, dummy;
+	u32 pfn32;
+
+	pfn32 = (u32)pfn;
+	if (pfn32 != pfn)
+		return false;
+
+	STATS_INC(b->stats.unlock);
+
+	status = VMWARE_BALLOON_CMD(UNLOCK, pfn, dummy);
+	if (vmballoon_check_status(b, status))
+		return true;
+
+	pr_debug("%s - ppn %lx, hv returns %ld\n", __func__, pfn, status);
+	STATS_INC(b->stats.unlock_fail);
+	return false;
+}
+
+/*
+ * Quickly release all pages allocated for the balloon. This function is
+ * called when host decides to "reset" balloon for one reason or another.
+ * Unlike normal "deflate" we do not (shall not) notify host of the pages
+ * being released.
+ */
+static void vmballoon_pop(struct vmballoon *b)
+{
+	struct page *page, *next;
+	unsigned int count = 0;
+
+	list_for_each_entry_safe(page, next, &b->pages, lru) {
+		list_del(&page->lru);
+		__free_page(page);
+		STATS_INC(b->stats.free);
+		b->size--;
+
+		if (++count >= b->rate_free) {
+			count = 0;
+			cond_resched();
+		}
+	}
+}
+
+/*
+ * Perform standard reset sequence by popping the balloon (in case it
+ * is not  empty) and then restarting protocol. This operation normally
+ * happens when host responds with VMW_BALLOON_ERROR_RESET to a command.
+ */
+static void vmballoon_reset(struct vmballoon *b)
+{
+	/* free all pages, skipping monitor unlock */
+	vmballoon_pop(b);
+
+	if (vmballoon_send_start(b)) {
+		b->reset_required = false;
+		if (!vmballoon_send_guest_id(b))
+			pr_err("failed to send guest ID to the host\n");
+	}
+}
+
+/*
+ * Allocate (or reserve) a page for the balloon and notify the host.  If host
+ * refuses the page put it on "refuse" list and allocate another one until host
+ * is satisfied. "Refused" pages are released at the end of inflation cycle
+ * (when we allocate b->rate_alloc pages).
+ */
+static int vmballoon_reserve_page(struct vmballoon *b, bool can_sleep)
+{
+	struct page *page;
+	gfp_t flags;
+	bool locked = false;
+
+	do {
+		if (!can_sleep)
+			STATS_INC(b->stats.alloc);
+		else
+			STATS_INC(b->stats.sleep_alloc);
+
+		flags = can_sleep ? VMW_PAGE_ALLOC_CANSLEEP : VMW_PAGE_ALLOC_NOSLEEP;
+		page = alloc_page(flags);
+		if (!page) {
+			if (!can_sleep)
+				STATS_INC(b->stats.alloc_fail);
+			else
+				STATS_INC(b->stats.sleep_alloc_fail);
+			return -ENOMEM;
+		}
+
+		/* inform monitor */
+		locked = vmballoon_send_lock_page(b, page_to_pfn(page));
+		if (!locked) {
+			if (b->reset_required) {
+				__free_page(page);
+				return -EIO;
+			}
+
+			/* place on list of non-balloonable pages, retry allocation */
+			list_add(&page->lru, &b->refused_pages);
+			STATS_INC(b->stats.refused_alloc);
+		}
+	} while (!locked);
+
+	/* track allocated page */
+	list_add(&page->lru, &b->pages);
+
+	/* update balloon size */
+	b->size++;
+
+	return 0;
+}
+
+/*
+ * Release the page allocated for the balloon. Note that we first notify
+ * the host so it can make sure the page will be available for the guest
+ * to use, if needed.
+ */
+static int vmballoon_release_page(struct vmballoon *b, struct page *page)
+{
+	if (!vmballoon_send_unlock_page(b, page_to_pfn(page)))
+		return -EIO;
+
+	list_del(&page->lru);
+
+	/* deallocate page */
+	__free_page(page);
+	STATS_INC(b->stats.free);
+
+	/* update balloon size */
+	b->size--;
+
+	return 0;
+}
+
+/*
+ * Release pages that were allocated while attempting to inflate the
+ * balloon but were refused by the host for one reason or another.
+ */
+static void vmballoon_release_refused_pages(struct vmballoon *b)
+{
+	struct page *page, *next;
+
+	list_for_each_entry_safe(page, next, &b->refused_pages, lru) {
+		list_del(&page->lru);
+		__free_page(page);
+		STATS_INC(b->stats.refused_free);
+	}
+}
+
+/*
+ * Inflate the balloon towards its target size. Note that we try to limit
+ * the rate of allocation to make sure we are not choking the rest of the
+ * system.
+ */
+static void vmballoon_inflate(struct vmballoon *b)
+{
+	unsigned int goal;
+	unsigned int rate;
+	unsigned int i;
+	unsigned int allocations = 0;
+	int error = 0;
+	bool alloc_can_sleep = false;
+
+	pr_debug("%s - size: %d, target %d\n", __func__, b->size, b->target);
+
+	/*
+	 * First try NOSLEEP page allocations to inflate balloon.
+	 *
+	 * If we do not throttle nosleep allocations, we can drain all
+	 * free pages in the guest quickly (if the balloon target is high).
+	 * As a side-effect, draining free pages helps to inform (force)
+	 * the guest to start swapping if balloon target is not met yet,
+	 * which is a desired behavior. However, balloon driver can consume
+	 * all available CPU cycles if too many pages are allocated in a
+	 * second. Therefore, we throttle nosleep allocations even when
+	 * the guest is not under memory pressure. OTOH, if we have already
+	 * predicted that the guest is under memory pressure, then we
+	 * slowdown page allocations considerably.
+	 */
+
+	goal = b->target - b->size;
+	/*
+	 * Start with no sleep allocation rate which may be higher
+	 * than sleeping allocation rate.
+	 */
+	rate = b->slow_allocation_cycles ?
+			b->rate_alloc : VMW_BALLOON_NOSLEEP_ALLOC_MAX;
+
+	pr_debug("%s - goal: %d, no-sleep rate: %d, sleep rate: %d\n",
+		 __func__, goal, rate, b->rate_alloc);
+
+	for (i = 0; i < goal; i++) {
+
+		error = vmballoon_reserve_page(b, alloc_can_sleep);
+		if (error) {
+			if (error != -ENOMEM) {
+				/*
+				 * Not a page allocation failure, stop this
+				 * cycle. Maybe we'll get new target from
+				 * the host soon.
+				 */
+				break;
+			}
+
+			if (alloc_can_sleep) {
+				/*
+				 * CANSLEEP page allocation failed, so guest
+				 * is under severe memory pressure. Quickly
+				 * decrease allocation rate.
+				 */
+				b->rate_alloc = max(b->rate_alloc / 2,
+						    VMW_BALLOON_RATE_ALLOC_MIN);
+				break;
+			}
+
+			/*
+			 * NOSLEEP page allocation failed, so the guest is
+			 * under memory pressure. Let us slow down page
+			 * allocations for next few cycles so that the guest
+			 * gets out of memory pressure. Also, if we already
+			 * allocated b->rate_alloc pages, let's pause,
+			 * otherwise switch to sleeping allocations.
+			 */
+			b->slow_allocation_cycles = VMW_BALLOON_SLOW_CYCLES;
+
+			if (i >= b->rate_alloc)
+				break;
+
+			alloc_can_sleep = true;
+			/* Lower rate for sleeping allocations. */
+			rate = b->rate_alloc;
+		}
+
+		if (++allocations > VMW_BALLOON_YIELD_THRESHOLD) {
+			cond_resched();
+			allocations = 0;
+		}
+
+		if (i >= rate) {
+			/* We allocated enough pages, let's take a break. */
+			break;
+		}
+	}
+
+	/*
+	 * We reached our goal without failures so try increasing
+	 * allocation rate.
+	 */
+	if (error == 0 && i >= b->rate_alloc) {
+		unsigned int mult = i / b->rate_alloc;
+
+		b->rate_alloc =
+			min(b->rate_alloc + mult * VMW_BALLOON_RATE_ALLOC_INC,
+			    VMW_BALLOON_RATE_ALLOC_MAX);
+	}
+
+	vmballoon_release_refused_pages(b);
+}
+
+/*
+ * Decrease the size of the balloon allowing guest to use more memory.
+ */
+static void vmballoon_deflate(struct vmballoon *b)
+{
+	struct page *page, *next;
+	unsigned int i = 0;
+	unsigned int goal;
+	int error;
+
+	pr_debug("%s - size: %d, target %d\n", __func__, b->size, b->target);
+
+	/* limit deallocation rate */
+	goal = min(b->size - b->target, b->rate_free);
+
+	pr_debug("%s - goal: %d, rate: %d\n", __func__, goal, b->rate_free);
+
+	/* free pages to reach target */
+	list_for_each_entry_safe(page, next, &b->pages, lru) {
+		error = vmballoon_release_page(b, page);
+		if (error) {
+			/* quickly decrease rate in case of error */
+			b->rate_free = max(b->rate_free / 2,
+					   VMW_BALLOON_RATE_FREE_MIN);
+			return;
+		}
+
+		if (++i >= goal)
+			break;
+	}
+
+	/* slowly increase rate if there were no errors */
+	b->rate_free = min(b->rate_free + VMW_BALLOON_RATE_FREE_INC,
+			   VMW_BALLOON_RATE_FREE_MAX);
+}
+
+/*
+ * Balloon work function: reset protocol, if needed, get the new size and
+ * adjust balloon as needed. Repeat in 1 sec.
+ */
+static void vmballoon_work(struct work_struct *work)
+{
+	struct delayed_work *dwork = to_delayed_work(work);
+	struct vmballoon *b = container_of(dwork, struct vmballoon, dwork);
+	unsigned int target;
+
+	STATS_INC(b->stats.timer);
+
+	if (b->reset_required)
+		vmballoon_reset(b);
+
+	if (b->slow_allocation_cycles > 0)
+		b->slow_allocation_cycles--;
+
+	if (vmballoon_send_get_target(b, &target)) {
+		/* update target, adjust size */
+		b->target = target;
+
+		if (b->size < target)
+			vmballoon_inflate(b);
+		else if (b->size > target)
+			vmballoon_deflate(b);
+	}
+
+	queue_delayed_work(vmballoon_wq, dwork, round_jiffies_relative(HZ));
+}
+
+/*
+ * DEBUGFS Interface
+ */
+#ifdef CONFIG_DEBUG_FS
+
+static int vmballoon_debug_show(struct seq_file *f, void *offset)
+{
+	struct vmballoon *b = f->private;
+	struct vmballoon_stats *stats = &b->stats;
+
+	/* format size info */
+	seq_printf(f,
+		   "target:             %8d pages\n"
+		   "current:            %8d pages\n",
+		   b->target, b->size);
+
+	/* format rate info */
+	seq_printf(f,
+		   "rateNoSleepAlloc:   %8d pages/sec\n"
+		   "rateSleepAlloc:     %8d pages/sec\n"
+		   "rateFree:           %8d pages/sec\n",
+		   VMW_BALLOON_NOSLEEP_ALLOC_MAX,
+		   b->rate_alloc, b->rate_free);
+
+	seq_printf(f,
+		   "\n"
+		   "timer:              %8u\n"
+		   "start:              %8u (%4u failed)\n"
+		   "guestType:          %8u (%4u failed)\n"
+		   "lock:               %8u (%4u failed)\n"
+		   "unlock:             %8u (%4u failed)\n"
+		   "target:             %8u (%4u failed)\n"
+		   "primNoSleepAlloc:   %8u (%4u failed)\n"
+		   "primCanSleepAlloc:  %8u (%4u failed)\n"
+		   "primFree:           %8u\n"
+		   "errAlloc:           %8u\n"
+		   "errFree:            %8u\n",
+		   stats->timer,
+		   stats->start, stats->start_fail,
+		   stats->guest_type, stats->guest_type_fail,
+		   stats->lock,  stats->lock_fail,
+		   stats->unlock, stats->unlock_fail,
+		   stats->target, stats->target_fail,
+		   stats->alloc, stats->alloc_fail,
+		   stats->sleep_alloc, stats->sleep_alloc_fail,
+		   stats->free,
+		   stats->refused_alloc, stats->refused_free);
+
+	return 0;
+}
+
+static int vmballoon_debug_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, vmballoon_debug_show, inode->i_private);
+}
+
+static const struct file_operations vmballoon_debug_fops = {
+	.owner		= THIS_MODULE,
+	.open		= vmballoon_debug_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+static int __init vmballoon_debugfs_init(struct vmballoon *b)
+{
+	int error;
+
+	b->dbg_entry = debugfs_create_file("vmmemctl", S_IRUGO, NULL, b,
+					   &vmballoon_debug_fops);
+	if (IS_ERR(b->dbg_entry)) {
+		error = PTR_ERR(b->dbg_entry);
+		pr_err("failed to create debugfs entry, error: %d\n", error);
+		return error;
+	}
+
+	return 0;
+}
+
+static void __exit vmballoon_debugfs_exit(struct vmballoon *b)
+{
+	debugfs_remove(b->dbg_entry);
+}
+
+#else
+
+static inline int vmballoon_debugfs_init(struct vmballoon *b)
+{
+	return 0;
+}
+
+static inline void vmballoon_debugfs_exit(struct vmballoon *b)
+{
+}
+
+#endif	/* CONFIG_DEBUG_FS */
+
+static int __init vmballoon_init(void)
+{
+	int error;
+
+	/*
+	 * Check if we are running on VMware's hypervisor and bail out
+	 * if we are not.
+	 */
+	if (!vmware_platform())
+		return -ENODEV;
+
+	vmballoon_wq = create_freezeable_workqueue("vmmemctl");
+	if (!vmballoon_wq) {
+		pr_err("failed to create workqueue\n");
+		return -ENOMEM;
+	}
+
+	INIT_LIST_HEAD(&balloon.pages);
+	INIT_LIST_HEAD(&balloon.refused_pages);
+
+	/* initialize rates */
+	balloon.rate_alloc = VMW_BALLOON_RATE_ALLOC_MAX;
+	balloon.rate_free = VMW_BALLOON_RATE_FREE_MAX;
+
+	INIT_DELAYED_WORK(&balloon.dwork, vmballoon_work);
+
+	/*
+	 * Start balloon.
+	 */
+	if (!vmballoon_send_start(&balloon)) {
+		pr_err("failed to send start command to the host\n");
+		error = -EIO;
+		goto fail;
+	}
+
+	if (!vmballoon_send_guest_id(&balloon)) {
+		pr_err("failed to send guest ID to the host\n");
+		error = -EIO;
+		goto fail;
+	}
+
+	error = vmballoon_debugfs_init(&balloon);
+	if (error)
+		goto fail;
+
+	queue_delayed_work(vmballoon_wq, &balloon.dwork, 0);
+
+	return 0;
+
+fail:
+	destroy_workqueue(vmballoon_wq);
+	return error;
+}
+module_init(vmballoon_init);
+
+static void __exit vmballoon_exit(void)
+{
+	cancel_delayed_work_sync(&balloon.dwork);
+	destroy_workqueue(vmballoon_wq);
+
+	vmballoon_debugfs_exit(&balloon);
+
+	/*
+	 * Deallocate all reserved memory, and reset connection with monitor.
+	 * Reset connection before deallocating memory to avoid potential for
+	 * additional spurious resets from guest touching deallocated pages.
+	 */
+	vmballoon_send_start(&balloon);
+	vmballoon_pop(&balloon);
+}
+module_exit(vmballoon_exit);