Merge branch 'tty-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6

* 'tty-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: (48 commits)
  serial: 8250_pci: add support for Cronyx Omega PCI multiserial board.
  tty/serial: Fix break handling for PORT_TEGRA
  tty/serial: Add explicit PORT_TEGRA type
  n_tracerouter and n_tracesink ldisc additions.
  Intel PTI implementaiton of MIPI 1149.7.
  Kernel documentation for the PTI feature.
  export kernel call get_task_comm().
  tty: Remove to support serial for S5P6442
  pch_phub: Support new device ML7223
  8250_pci: Add support for the Digi/IBM PCIe 2-port Adapter
  ASoC: Update cx20442 for TTY API change
  pch_uart: Support new device ML7223 IOH
  parport: Use request_muxed_region for IT87 probe and lock
  tty/serial: add support for Xilinx PS UART
  n_gsm: Use print_hex_dump_bytes
  drivers/tty/moxa.c: Put correct tty value
  TTY: tty_io, annotate locking functions
  TTY: serial_core, remove superfluous set_task_state
  TTY: serial_core, remove invalid test
  Char: moxa, fix locking in moxa_write
  ...

Fix up trivial conflicts in drivers/bluetooth/hci_ldisc.c and
drivers/tty/serial/Makefile.

I did the hci_ldisc thing as an evil merge, cleaning things up.

5 files changed, 1134 insertions, 31 deletions

diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index d80dcdee88f..4e349cd98bc 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -144,6 +144,19 @@ config PHANTOM
 	  If you choose to build module, its name will be phantom. If unsure,
 	  say N here.
 
+config INTEL_MID_PTI
+	tristate "Parallel Trace Interface for MIPI P1149.7 cJTAG standard"
+	default n
+	help
+	  The PTI (Parallel Trace Interface) driver directs
+	  trace data routed from various parts in the system out
+	  through an Intel Penwell PTI port and out of the mobile
+	  device for analysis with a debugging tool (Lauterbach or Fido).
+
+	  You should select this driver if the target kernel is meant for
+	  an Intel Atom (non-netbook) mobile device containing a MIPI
+	  P1149.7 standard implementation.
+
 config SGI_IOC4
 	tristate "SGI IOC4 Base IO support"
 	depends on PCI
@@ -459,7 +472,7 @@ config BMP085
 	  module will be called bmp085.
 
 config PCH_PHUB
-	tristate "PCH Packet Hub of Intel Topcliff / OKI SEMICONDUCTOR ML7213"
+	tristate "Intel EG20T PCH / OKI SEMICONDUCTOR IOH(ML7213/ML7223) PHUB"
 	depends on PCI
 	help
 	  This driver is for PCH(Platform controller Hub) PHUB(Packet Hub) of
@@ -467,10 +480,12 @@ config PCH_PHUB
 	  processor. The Topcliff has MAC address and Option ROM data in SROM.
 	  This driver can access MAC address and Option ROM data in SROM.
 
-	  This driver also can be used for OKI SEMICONDUCTOR's ML7213 which is
-	  for IVI(In-Vehicle Infotainment) use.
-	  ML7213 is companion chip for Intel Atom E6xx series.
-	  ML7213 is completely compatible for Intel EG20T PCH.
+	  This driver also can be used for OKI SEMICONDUCTOR IOH(Input/
+	  Output Hub), ML7213 and ML7223.
+	  ML7213 IOH is for IVI(In-Vehicle Infotainment) use and ML7223 IOH is
+	  for MP(Media Phone) use.
+	  ML7213/ML7223 is companion chip for Intel Atom E6xx series.
+	  ML7213/ML7223 is completely compatible for Intel EG20T PCH.
 
 	  To compile this driver as a module, choose M here: the module will
 	  be called pch_phub.
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index 848e8464faa..5f03172cc0b 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -6,6 +6,7 @@ obj-$(CONFIG_IBM_ASM)		+= ibmasm/
 obj-$(CONFIG_AD525X_DPOT)	+= ad525x_dpot.o
 obj-$(CONFIG_AD525X_DPOT_I2C)	+= ad525x_dpot-i2c.o
 obj-$(CONFIG_AD525X_DPOT_SPI)	+= ad525x_dpot-spi.o
+0bj-$(CONFIG_INTEL_MID_PTI)	+= pti.o
 obj-$(CONFIG_ATMEL_PWM)		+= atmel_pwm.o
 obj-$(CONFIG_ATMEL_SSC)		+= atmel-ssc.o
 obj-$(CONFIG_ATMEL_TCLIB)	+= atmel_tclib.o
diff --git a/drivers/misc/pch_phub.c b/drivers/misc/pch_phub.c
index a19cb710a24..5fe79df4483 100644
--- a/drivers/misc/pch_phub.c
+++ b/drivers/misc/pch_phub.c
@@ -34,12 +34,18 @@
 #define PHUB_TIMEOUT 0x05		/* Time out value for Status Register */
 #define PCH_PHUB_ROM_WRITE_ENABLE 0x01	/* Enabling for writing ROM */
 #define PCH_PHUB_ROM_WRITE_DISABLE 0x00	/* Disabling for writing ROM */
-#define PCH_PHUB_MAC_START_ADDR 0x20C  /* MAC data area start address offset */
-#define PCH_PHUB_ROM_START_ADDR_EG20T 0x14 /* ROM data area start address offset
+#define PCH_PHUB_MAC_START_ADDR_EG20T 0x14  /* MAC data area start address
+					       offset */
+#define PCH_PHUB_MAC_START_ADDR_ML7223 0x20C  /* MAC data area start address
+						 offset */
+#define PCH_PHUB_ROM_START_ADDR_EG20T 0x80 /* ROM data area start address offset
 					      (Intel EG20T PCH)*/
 #define PCH_PHUB_ROM_START_ADDR_ML7213 0x400 /* ROM data area start address
 						offset(OKI SEMICONDUCTOR ML7213)
 					      */
+#define PCH_PHUB_ROM_START_ADDR_ML7223 0x400 /* ROM data area start address
+						offset(OKI SEMICONDUCTOR ML7223)
+					      */
 
 /* MAX number of INT_REDUCE_CONTROL registers */
 #define MAX_NUM_INT_REDUCE_CONTROL_REG 128
@@ -63,6 +69,10 @@
 #define PCI_VENDOR_ID_ROHM			0x10db
 #define PCI_DEVICE_ID_ROHM_ML7213_PHUB		0x801A
 
+/* Macros for ML7223 */
+#define PCI_DEVICE_ID_ROHM_ML7223_mPHUB	0x8012 /* for Bus-m */
+#define PCI_DEVICE_ID_ROHM_ML7223_nPHUB	0x8002 /* for Bus-n */
+
 /* SROM ACCESS Macro */
 #define PCH_WORD_ADDR_MASK (~((1 << 2) - 1))
 
@@ -100,6 +110,9 @@
  * @clkcfg_reg:				CLK CFG register val
  * @pch_phub_base_address:		Register base address
  * @pch_phub_extrom_base_address:	external rom base address
+ * @pch_mac_start_address:		MAC address area start address
+ * @pch_opt_rom_start_address:		Option ROM start address
+ * @ioh_type:				Save IOH type
  */
 struct pch_phub_reg {
 	u32 phub_id_reg;
@@ -117,6 +130,9 @@ struct pch_phub_reg {
 	u32 clkcfg_reg;
 	void __iomem *pch_phub_base_address;
 	void __iomem *pch_phub_extrom_base_address;
+	u32 pch_mac_start_address;
+	u32 pch_opt_rom_start_address;
+	int ioh_type;
 };
 
 /* SROM SPEC for MAC address assignment offset */
@@ -319,7 +335,7 @@ static void pch_phub_read_serial_rom_val(struct pch_phub_reg *chip,
 {
 	unsigned int mem_addr;
 
-	mem_addr = PCH_PHUB_ROM_START_ADDR_EG20T +
+	mem_addr = chip->pch_mac_start_address +
 			pch_phub_mac_offset[offset_address];
 
 	pch_phub_read_serial_rom(chip, mem_addr, data);
@@ -336,7 +352,7 @@ static int pch_phub_write_serial_rom_val(struct pch_phub_reg *chip,
 	int retval;
 	unsigned int mem_addr;
 
-	mem_addr = PCH_PHUB_ROM_START_ADDR_EG20T +
+	mem_addr = chip->pch_mac_start_address +
 			pch_phub_mac_offset[offset_address];
 
 	retval = pch_phub_write_serial_rom(chip, mem_addr, data);
@@ -384,6 +400,48 @@ static int pch_phub_gbe_serial_rom_conf(struct pch_phub_reg *chip)
 	return retval;
 }
 
+/* pch_phub_gbe_serial_rom_conf_mp - makes SerialROM header format configuration
+ * for Gigabit Ethernet MAC address
+ */
+static int pch_phub_gbe_serial_rom_conf_mp(struct pch_phub_reg *chip)
+{
+	int retval;
+	u32 offset_addr;
+
+	offset_addr = 0x200;
+	retval = pch_phub_write_serial_rom(chip, 0x03 + offset_addr, 0xbc);
+	retval |= pch_phub_write_serial_rom(chip, 0x02 + offset_addr, 0x00);
+	retval |= pch_phub_write_serial_rom(chip, 0x01 + offset_addr, 0x40);
+	retval |= pch_phub_write_serial_rom(chip, 0x00 + offset_addr, 0x02);
+
+	retval |= pch_phub_write_serial_rom(chip, 0x07 + offset_addr, 0x00);
+	retval |= pch_phub_write_serial_rom(chip, 0x06 + offset_addr, 0x00);
+	retval |= pch_phub_write_serial_rom(chip, 0x05 + offset_addr, 0x00);
+	retval |= pch_phub_write_serial_rom(chip, 0x04 + offset_addr, 0x80);
+
+	retval |= pch_phub_write_serial_rom(chip, 0x0b + offset_addr, 0xbc);
+	retval |= pch_phub_write_serial_rom(chip, 0x0a + offset_addr, 0x00);
+	retval |= pch_phub_write_serial_rom(chip, 0x09 + offset_addr, 0x40);
+	retval |= pch_phub_write_serial_rom(chip, 0x08 + offset_addr, 0x18);
+
+	retval |= pch_phub_write_serial_rom(chip, 0x13 + offset_addr, 0xbc);
+	retval |= pch_phub_write_serial_rom(chip, 0x12 + offset_addr, 0x00);
+	retval |= pch_phub_write_serial_rom(chip, 0x11 + offset_addr, 0x40);
+	retval |= pch_phub_write_serial_rom(chip, 0x10 + offset_addr, 0x19);
+
+	retval |= pch_phub_write_serial_rom(chip, 0x1b + offset_addr, 0xbc);
+	retval |= pch_phub_write_serial_rom(chip, 0x1a + offset_addr, 0x00);
+	retval |= pch_phub_write_serial_rom(chip, 0x19 + offset_addr, 0x40);
+	retval |= pch_phub_write_serial_rom(chip, 0x18 + offset_addr, 0x3a);
+
+	retval |= pch_phub_write_serial_rom(chip, 0x1f + offset_addr, 0x01);
+	retval |= pch_phub_write_serial_rom(chip, 0x1e + offset_addr, 0x00);
+	retval |= pch_phub_write_serial_rom(chip, 0x1d + offset_addr, 0x00);
+	retval |= pch_phub_write_serial_rom(chip, 0x1c + offset_addr, 0x00);
+
+	return retval;
+}
+
 /**
  * pch_phub_read_gbe_mac_addr() - Read Gigabit Ethernet MAC address
  * @offset_address:	Gigabit Ethernet MAC address offset value.
@@ -406,7 +464,10 @@ static int pch_phub_write_gbe_mac_addr(struct pch_phub_reg *chip, u8 *data)
 	int retval;
 	int i;
 
-	retval = pch_phub_gbe_serial_rom_conf(chip);
+	if (chip->ioh_type == 1) /* EG20T */
+		retval = pch_phub_gbe_serial_rom_conf(chip);
+	else	/* ML7223 */
+		retval = pch_phub_gbe_serial_rom_conf_mp(chip);
 	if (retval)
 		return retval;
 
@@ -441,12 +502,16 @@ static ssize_t pch_phub_bin_read(struct file *filp, struct kobject *kobj,
 	}
 
 	/* Get Rom signature */
-	pch_phub_read_serial_rom(chip, 0x80, (unsigned char *)&rom_signature);
+	pch_phub_read_serial_rom(chip, chip->pch_opt_rom_start_address,
+				(unsigned char *)&rom_signature);
 	rom_signature &= 0xff;
-	pch_phub_read_serial_rom(chip, 0x81, (unsigned char *)&tmp);
+	pch_phub_read_serial_rom(chip, chip->pch_opt_rom_start_address + 1,
+				(unsigned char *)&tmp);
 	rom_signature |= (tmp & 0xff) << 8;
 	if (rom_signature == 0xAA55) {
-		pch_phub_read_serial_rom(chip, 0x82, &rom_length);
+		pch_phub_read_serial_rom(chip,
+					 chip->pch_opt_rom_start_address + 2,
+					 &rom_length);
 		orom_size = rom_length * 512;
 		if (orom_size < off) {
 			addr_offset = 0;
@@ -458,8 +523,9 @@ static ssize_t pch_phub_bin_read(struct file *filp, struct kobject *kobj,
 		}
 
 		for (addr_offset = 0; addr_offset < count; addr_offset++) {
-			pch_phub_read_serial_rom(chip, 0x80 + addr_offset + off,
-							 &buf[addr_offset]);
+			pch_phub_read_serial_rom(chip,
+			    chip->pch_opt_rom_start_address + addr_offset + off,
+			    &buf[addr_offset]);
 		}
 	} else {
 		err = -ENODATA;
@@ -502,8 +568,9 @@ static ssize_t pch_phub_bin_write(struct file *filp, struct kobject *kobj,
 		if (PCH_PHUB_OROM_SIZE < off + addr_offset)
 			goto return_ok;
 
-		ret = pch_phub_write_serial_rom(chip, 0x80 + addr_offset + off,
-						       buf[addr_offset]);
+		ret = pch_phub_write_serial_rom(chip,
+			    chip->pch_opt_rom_start_address + addr_offset + off,
+			    buf[addr_offset]);
 		if (ret) {
 			err = ret;
 			goto return_err;
@@ -603,19 +670,22 @@ static int __devinit pch_phub_probe(struct pci_dev *pdev,
 	dev_dbg(&pdev->dev, "%s : pci_iomap SUCCESS and value "
 		"in pch_phub_base_address variable is %p\n", __func__,
 		chip->pch_phub_base_address);
-	chip->pch_phub_extrom_base_address = pci_map_rom(pdev, &rom_size);
 
-	if (chip->pch_phub_extrom_base_address == 0) {
-		dev_err(&pdev->dev, "%s : pci_map_rom FAILED", __func__);
-		ret = -ENOMEM;
-		goto err_pci_map;
+	if (id->driver_data != 3) {
+		chip->pch_phub_extrom_base_address =\
+						   pci_map_rom(pdev, &rom_size);
+		if (chip->pch_phub_extrom_base_address == 0) {
+			dev_err(&pdev->dev, "%s: pci_map_rom FAILED", __func__);
+			ret = -ENOMEM;
+			goto err_pci_map;
+		}
+		dev_dbg(&pdev->dev, "%s : "
+			"pci_map_rom SUCCESS and value in "
+			"pch_phub_extrom_base_address variable is %p\n",
+			__func__, chip->pch_phub_extrom_base_address);
 	}
-	dev_dbg(&pdev->dev, "%s : "
-		"pci_map_rom SUCCESS and value in "
-		"pch_phub_extrom_base_address variable is %p\n", __func__,
-		chip->pch_phub_extrom_base_address);
 
-	if (id->driver_data == 1) {
+	if (id->driver_data == 1) { /* EG20T PCH */
 		retval = sysfs_create_file(&pdev->dev.kobj,
 					   &dev_attr_pch_mac.attr);
 		if (retval)
@@ -642,7 +712,9 @@ static int __devinit pch_phub_probe(struct pci_dev *pdev,
 		iowrite32(0x000affaa, chip->pch_phub_base_address + 0x14);
 		/* set the interrupt delay value */
 		iowrite32(0x25, chip->pch_phub_base_address + 0x44);
-	} else if (id->driver_data == 2) {
+		chip->pch_opt_rom_start_address = PCH_PHUB_ROM_START_ADDR_EG20T;
+		chip->pch_mac_start_address = PCH_PHUB_MAC_START_ADDR_EG20T;
+	} else if (id->driver_data == 2) { /* ML7213 IOH */
 		retval = sysfs_create_bin_file(&pdev->dev.kobj, &pch_bin_attr);
 		if (retval)
 			goto err_sysfs_create;
@@ -653,7 +725,38 @@ static int __devinit pch_phub_probe(struct pci_dev *pdev,
 		 * Device8(USB OHCI #0/ USB EHCI #0):a
 		 */
 		iowrite32(0x000affa0, chip->pch_phub_base_address + 0x14);
+		chip->pch_opt_rom_start_address =\
+						 PCH_PHUB_ROM_START_ADDR_ML7213;
+	} else if (id->driver_data == 3) { /* ML7223 IOH Bus-m*/
+		/* set the prefech value
+		 * Device8(GbE)
+		 */
+		iowrite32(0x000a0000, chip->pch_phub_base_address + 0x14);
+		chip->pch_opt_rom_start_address =\
+						 PCH_PHUB_ROM_START_ADDR_ML7223;
+		chip->pch_mac_start_address = PCH_PHUB_MAC_START_ADDR_ML7223;
+	} else if (id->driver_data == 4) { /* ML7223 IOH Bus-n*/
+		retval = sysfs_create_file(&pdev->dev.kobj,
+					   &dev_attr_pch_mac.attr);
+		if (retval)
+			goto err_sysfs_create;
+		retval = sysfs_create_bin_file(&pdev->dev.kobj, &pch_bin_attr);
+		if (retval)
+			goto exit_bin_attr;
+		/* set the prefech value
+		 * Device2(USB OHCI #0,1,2,3/ USB EHCI #0):a
+		 * Device4(SDIO #0,1):f
+		 * Device6(SATA 2):f
+		 */
+		iowrite32(0x0000ffa0, chip->pch_phub_base_address + 0x14);
+		/* set the interrupt delay value */
+		iowrite32(0x25, chip->pch_phub_base_address + 0x140);
+		chip->pch_opt_rom_start_address =\
+						 PCH_PHUB_ROM_START_ADDR_ML7223;
+		chip->pch_mac_start_address = PCH_PHUB_MAC_START_ADDR_ML7223;
 	}
+
+	chip->ioh_type = id->driver_data;
 	pci_set_drvdata(pdev, chip);
 
 	return 0;
@@ -733,6 +836,8 @@ static int pch_phub_resume(struct pci_dev *pdev)
 static struct pci_device_id pch_phub_pcidev_id[] = {
 	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_PCH1_PHUB),       1,  },
 	{ PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ROHM_ML7213_PHUB), 2,  },
+	{ PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ROHM_ML7223_mPHUB), 3,  },
+	{ PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ROHM_ML7223_nPHUB), 4,  },
 	{ }
 };
 MODULE_DEVICE_TABLE(pci, pch_phub_pcidev_id);
@@ -759,5 +864,5 @@ static void __exit pch_phub_pci_exit(void)
 module_init(pch_phub_pci_init);
 module_exit(pch_phub_pci_exit);
 
-MODULE_DESCRIPTION("PCH Packet Hub PCI Driver");
+MODULE_DESCRIPTION("Intel EG20T PCH/OKI SEMICONDUCTOR IOH(ML7213/ML7223) PHUB");
 MODULE_LICENSE("GPL");
diff --git a/drivers/misc/pti.c b/drivers/misc/pti.c
new file mode 100644
index 00000000000..bb6f9255c17
--- /dev/null
+++ b/drivers/misc/pti.c
@@ -0,0 +1,980 @@
+/*
+ *  pti.c - PTI driver for cJTAG data extration
+ *
+ *  Copyright (C) Intel 2010
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ * The PTI (Parallel Trace Interface) driver directs trace data routed from
+ * various parts in the system out through the Intel Penwell PTI port and
+ * out of the mobile device for analysis with a debugging tool
+ * (Lauterbach, Fido). This is part of a solution for the MIPI P1149.7,
+ * compact JTAG, standard.
+ */
+
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/console.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/tty.h>
+#include <linux/tty_driver.h>
+#include <linux/pci.h>
+#include <linux/mutex.h>
+#include <linux/miscdevice.h>
+#include <linux/pti.h>
+
+#define DRIVERNAME		"pti"
+#define PCINAME			"pciPTI"
+#define TTYNAME			"ttyPTI"
+#define CHARNAME		"pti"
+#define PTITTY_MINOR_START	0
+#define PTITTY_MINOR_NUM	2
+#define MAX_APP_IDS		16   /* 128 channel ids / u8 bit size */
+#define MAX_OS_IDS		16   /* 128 channel ids / u8 bit size */
+#define MAX_MODEM_IDS		16   /* 128 channel ids / u8 bit size */
+#define MODEM_BASE_ID		71   /* modem master ID address    */
+#define CONTROL_ID		72   /* control master ID address  */
+#define CONSOLE_ID		73   /* console master ID address  */
+#define OS_BASE_ID		74   /* base OS master ID address  */
+#define APP_BASE_ID		80   /* base App master ID address */
+#define CONTROL_FRAME_LEN	32   /* PTI control frame maximum size */
+#define USER_COPY_SIZE		8192 /* 8Kb buffer for user space copy */
+#define APERTURE_14		0x3800000 /* offset to first OS write addr */
+#define APERTURE_LEN		0x400000  /* address length */
+
+struct pti_tty {
+	struct pti_masterchannel *mc;
+};
+
+struct pti_dev {
+	struct tty_port port;
+	unsigned long pti_addr;
+	unsigned long aperture_base;
+	void __iomem *pti_ioaddr;
+	u8 ia_app[MAX_APP_IDS];
+	u8 ia_os[MAX_OS_IDS];
+	u8 ia_modem[MAX_MODEM_IDS];
+};
+
+/*
+ * This protects access to ia_app, ia_os, and ia_modem,
+ * which keeps track of channels allocated in
+ * an aperture write id.
+ */
+static DEFINE_MUTEX(alloclock);
+
+static struct pci_device_id pci_ids[] __devinitconst = {
+		{PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x82B)},
+		{0}
+};
+
+static struct tty_driver *pti_tty_driver;
+static struct pti_dev *drv_data;
+
+static unsigned int pti_console_channel;
+static unsigned int pti_control_channel;
+
+/**
+ *  pti_write_to_aperture()- The private write function to PTI HW.
+ *
+ *  @mc: The 'aperture'. It's part of a write address that holds
+ *       a master and channel ID.
+ *  @buf: Data being written to the HW that will ultimately be seen
+ *        in a debugging tool (Fido, Lauterbach).
+ *  @len: Size of buffer.
+ *
+ *  Since each aperture is specified by a unique
+ *  master/channel ID, no two processes will be writing
+ *  to the same aperture at the same time so no lock is required. The
+ *  PTI-Output agent will send these out in the order that they arrived, and
+ *  thus, it will intermix these messages. The debug tool can then later
+ *  regroup the appropriate message segments together reconstituting each
+ *  message.
+ */
+static void pti_write_to_aperture(struct pti_masterchannel *mc,
+				  u8 *buf,
+				  int len)
+{
+	int dwordcnt;
+	int final;
+	int i;
+	u32 ptiword;
+	u32 __iomem *aperture;
+	u8 *p = buf;
+
+	/*
+	 * calculate the aperture offset from the base using the master and
+	 * channel id's.
+	 */
+	aperture = drv_data->pti_ioaddr + (mc->master << 15)
+		+ (mc->channel << 8);
+
+	dwordcnt = len >> 2;
+	final = len - (dwordcnt << 2);	    /* final = trailing bytes    */
+	if (final == 0 && dwordcnt != 0) {  /* always need a final dword */
+		final += 4;
+		dwordcnt--;
+	}
+
+	for (i = 0; i < dwordcnt; i++) {
+		ptiword = be32_to_cpu(*(u32 *)p);
+		p += 4;
+		iowrite32(ptiword, aperture);
+	}
+
+	aperture += PTI_LASTDWORD_DTS;	/* adding DTS signals that is EOM */
+
+	ptiword = 0;
+	for (i = 0; i < final; i++)
+		ptiword |= *p++ << (24-(8*i));
+
+	iowrite32(ptiword, aperture);
+	return;
+}
+
+/**
+ *  pti_control_frame_built_and_sent()- control frame build and send function.
+ *
+ *  @mc: The master / channel structure on which the function
+ *       built a control frame.
+ *
+ *  To be able to post process the PTI contents on host side, a control frame
+ *  is added before sending any PTI content. So the host side knows on
+ *  each PTI frame the name of the thread using a dedicated master / channel.
+ *  The thread name is retrieved from the 'current' global variable.
+ *  This function builds this frame and sends it to a master ID CONTROL_ID.
+ *  The overhead is only 32 bytes since the driver only writes to HW
+ *  in 32 byte chunks.
+ */
+
+static void pti_control_frame_built_and_sent(struct pti_masterchannel *mc)
+{
+	struct pti_masterchannel mccontrol = {.master = CONTROL_ID,
+					      .channel = 0};
+	const char *control_format = "%3d %3d %s";
+	u8 control_frame[CONTROL_FRAME_LEN];
+
+	/*
+	 * Since we access the comm member in current's task_struct,
+	 * we only need to be as large as what 'comm' in that
+	 * structure is.
+	 */
+	char comm[TASK_COMM_LEN];
+
+	if (!in_interrupt())
+		get_task_comm(comm, current);
+	else
+		strncpy(comm, "Interrupt", TASK_COMM_LEN);
+
+	/* Absolutely ensure our buffer is zero terminated. */
+	comm[TASK_COMM_LEN-1] = 0;
+
+	mccontrol.channel = pti_control_channel;
+	pti_control_channel = (pti_control_channel + 1) & 0x7f;
+
+	snprintf(control_frame, CONTROL_FRAME_LEN, control_format, mc->master,
+		mc->channel, comm);
+	pti_write_to_aperture(&mccontrol, control_frame, strlen(control_frame));
+}
+
+/**
+ *  pti_write_full_frame_to_aperture()- high level function to
+ *					write to PTI.
+ *
+ *  @mc:  The 'aperture'. It's part of a write address that holds
+ *        a master and channel ID.
+ *  @buf: Data being written to the HW that will ultimately be seen
+ *        in a debugging tool (Fido, Lauterbach).
+ *  @len: Size of buffer.
+ *
+ *  All threads sending data (either console, user space application, ...)
+ *  are calling the high level function to write to PTI meaning that it is
+ *  possible to add a control frame before sending the content.
+ */
+static void pti_write_full_frame_to_aperture(struct pti_masterchannel *mc,
+						const unsigned char *buf,
+						int len)
+{
+	pti_control_frame_built_and_sent(mc);
+	pti_write_to_aperture(mc, (u8 *)buf, len);
+}
+
+/**
+ * get_id()- Allocate a master and channel ID.
+ *
+ * @id_array: an array of bits representing what channel
+ *            id's are allocated for writing.
+ * @max_ids:  The max amount of available write IDs to use.
+ * @base_id:  The starting SW channel ID, based on the Intel
+ *            PTI arch.
+ *
+ * Returns:
+ *	pti_masterchannel struct with master, channel ID address
+ *	0 for error
+ *
+ * Each bit in the arrays ia_app and ia_os correspond to a master and
+ * channel id. The bit is one if the id is taken and 0 if free. For
+ * every master there are 128 channel id's.
+ */
+static struct pti_masterchannel *get_id(u8 *id_array, int max_ids, int base_id)
+{
+	struct pti_masterchannel *mc;
+	int i, j, mask;
+
+	mc = kmalloc(sizeof(struct pti_masterchannel), GFP_KERNEL);
+	if (mc == NULL)
+		return NULL;
+
+	/* look for a byte with a free bit */
+	for (i = 0; i < max_ids; i++)
+		if (id_array[i] != 0xff)
+			break;
+	if (i == max_ids) {
+		kfree(mc);
+		return NULL;
+	}
+	/* find the bit in the 128 possible channel opportunities */
+	mask = 0x80;
+	for (j = 0; j < 8; j++) {
+		if ((id_array[i] & mask) == 0)
+			break;
+		mask >>= 1;
+	}
+
+	/* grab it */
+	id_array[i] |= mask;
+	mc->master  = base_id;
+	mc->channel = ((i & 0xf)<<3) + j;
+	/* write new master Id / channel Id allocation to channel control */
+	pti_control_frame_built_and_sent(mc);
+	return mc;
+}
+
+/*
+ * The following three functions:
+ * pti_request_mastercahannel(), mipi_release_masterchannel()
+ * and pti_writedata() are an API for other kernel drivers to
+ * access PTI.
+ */
+
+/**
+ * pti_request_masterchannel()- Kernel API function used to allocate
+ *				a master, channel ID address
+ *				to write to PTI HW.
+ *
+ * @type: 0- request Application  master, channel aperture ID write address.
+ *        1- request OS master, channel aperture ID write
+ *           address.
+ *        2- request Modem master, channel aperture ID
+ *           write address.
+ *        Other values, error.
+ *
+ * Returns:
+ *	pti_masterchannel struct
+ *	0 for error
+ */
+struct pti_masterchannel *pti_request_masterchannel(u8 type)
+{
+	struct pti_masterchannel *mc;
+
+	mutex_lock(&alloclock);
+
+	switch (type) {
+
+	case 0:
+		mc = get_id(drv_data->ia_app, MAX_APP_IDS, APP_BASE_ID);
+		break;
+
+	case 1:
+		mc = get_id(drv_data->ia_os, MAX_OS_IDS, OS_BASE_ID);
+		break;
+
+	case 2:
+		mc = get_id(drv_data->ia_modem, MAX_MODEM_IDS, MODEM_BASE_ID);
+		break;
+	default:
+		mc = NULL;
+	}
+
+	mutex_unlock(&alloclock);
+	return mc;
+}
+EXPORT_SYMBOL_GPL(pti_request_masterchannel);
+
+/**
+ * pti_release_masterchannel()- Kernel API function used to release
+ *				a master, channel ID address
+ *				used to write to PTI HW.
+ *
+ * @mc: master, channel apeture ID address to be released.
+ */
+void pti_release_masterchannel(struct pti_masterchannel *mc)
+{
+	u8 master, channel, i;
+
+	mutex_lock(&alloclock);
+
+	if (mc) {
+		master = mc->master;
+		channel = mc->channel;
+
+		if (master == APP_BASE_ID) {
+			i = channel >> 3;
+			drv_data->ia_app[i] &=  ~(0x80>>(channel & 0x7));
+		} else if (master == OS_BASE_ID) {
+			i = channel >> 3;
+			drv_data->ia_os[i] &= ~(0x80>>(channel & 0x7));
+		} else {
+			i = channel >> 3;
+			drv_data->ia_modem[i] &= ~(0x80>>(channel & 0x7));
+		}
+
+		kfree(mc);
+	}
+
+	mutex_unlock(&alloclock);
+}
+EXPORT_SYMBOL_GPL(pti_release_masterchannel);
+
+/**
+ * pti_writedata()- Kernel API function used to write trace
+ *                  debugging data to PTI HW.
+ *
+ * @mc:    Master, channel aperture ID address to write to.
+ *         Null value will return with no write occurring.
+ * @buf:   Trace debuging data to write to the PTI HW.
+ *         Null value will return with no write occurring.
+ * @count: Size of buf. Value of 0 or a negative number will
+ *         return with no write occuring.
+ */
+void pti_writedata(struct pti_masterchannel *mc, u8 *buf, int count)
+{
+	/*
+	 * since this function is exported, this is treated like an
+	 * API function, thus, all parameters should
+	 * be checked for validity.
+	 */
+	if ((mc != NULL) && (buf != NULL) && (count > 0))
+		pti_write_to_aperture(mc, buf, count);
+	return;
+}
+EXPORT_SYMBOL_GPL(pti_writedata);
+
+/**
+ * pti_pci_remove()- Driver exit method to remove PTI from
+ *		   PCI bus.
+ * @pdev: variable containing pci info of PTI.
+ */
+static void __devexit pti_pci_remove(struct pci_dev *pdev)
+{
+	struct pti_dev *drv_data;
+
+	drv_data = pci_get_drvdata(pdev);
+	if (drv_data != NULL) {
+		pci_iounmap(pdev, drv_data->pti_ioaddr);
+		pci_set_drvdata(pdev, NULL);
+		kfree(drv_data);
+		pci_release_region(pdev, 1);
+		pci_disable_device(pdev);
+	}
+}
+
+/*
+ * for the tty_driver_*() basic function descriptions, see tty_driver.h.
+ * Specific header comments made for PTI-related specifics.
+ */
+
+/**
+ * pti_tty_driver_open()- Open an Application master, channel aperture
+ * ID to the PTI device via tty device.
+ *
+ * @tty: tty interface.
+ * @filp: filp interface pased to tty_port_open() call.
+ *
+ * Returns:
+ *	int, 0 for success
+ *	otherwise, fail value
+ *
+ * The main purpose of using the tty device interface is for
+ * each tty port to have a unique PTI write aperture.  In an
+ * example use case, ttyPTI0 gets syslogd and an APP aperture
+ * ID and ttyPTI1 is where the n_tracesink ldisc hooks to route
+ * modem messages into PTI.  Modem trace data does not have to
+ * go to ttyPTI1, but ttyPTI0 and ttyPTI1 do need to be distinct
+ * master IDs.  These messages go through the PTI HW and out of
+ * the handheld platform and to the Fido/Lauterbach device.
+ */
+static int pti_tty_driver_open(struct tty_struct *tty, struct file *filp)
+{
+	/*
+	 * we actually want to allocate a new channel per open, per
+	 * system arch.  HW gives more than plenty channels for a single
+	 * system task to have its own channel to write trace data. This
+	 * also removes a locking requirement for the actual write
+	 * procedure.
+	 */
+	return tty_port_open(&drv_data->port, tty, filp);
+}
+
+/**
+ * pti_tty_driver_close()- close tty device and release Application
+ * master, channel aperture ID to the PTI device via tty device.
+ *
+ * @tty: tty interface.
+ * @filp: filp interface pased to tty_port_close() call.
+ *
+ * The main purpose of using the tty device interface is to route
+ * syslog daemon messages to the PTI HW and out of the handheld platform
+ * and to the Fido/Lauterbach device.
+ */
+static void pti_tty_driver_close(struct tty_struct *tty, struct file *filp)
+{
+	tty_port_close(&drv_data->port, tty, filp);
+}
+
+/**
+ * pti_tty_intstall()- Used to set up specific master-channels
+ *		       to tty ports for organizational purposes when
+ *		       tracing viewed from debuging tools.
+ *
+ * @driver: tty driver information.
+ * @tty: tty struct containing pti information.
+ *
+ * Returns:
+ *	0 for success
+ *	otherwise, error
+ */
+static int pti_tty_install(struct tty_driver *driver, struct tty_struct *tty)
+{
+	int idx = tty->index;
+	struct pti_tty *pti_tty_data;
+	int ret = tty_init_termios(tty);
+
+	if (ret == 0) {
+		tty_driver_kref_get(driver);
+		tty->count++;
+		driver->ttys[idx] = tty;
+
+		pti_tty_data = kmalloc(sizeof(struct pti_tty), GFP_KERNEL);
+		if (pti_tty_data == NULL)
+			return -ENOMEM;
+
+		if (idx == PTITTY_MINOR_START)
+			pti_tty_data->mc = pti_request_masterchannel(0);
+		else
+			pti_tty_data->mc = pti_request_masterchannel(2);
+
+		if (pti_tty_data->mc == NULL)
+			return -ENXIO;
+		tty->driver_data = pti_tty_data;
+	}
+
+	return ret;
+}
+
+/**
+ * pti_tty_cleanup()- Used to de-allocate master-channel resources
+ *		      tied to tty's of this driver.
+ *
+ * @tty: tty struct containing pti information.
+ */
+static void pti_tty_cleanup(struct tty_struct *tty)
+{
+	struct pti_tty *pti_tty_data = tty->driver_data;
+	if (pti_tty_data == NULL)
+		return;
+	pti_release_masterchannel(pti_tty_data->mc);
+	kfree(tty->driver_data);
+	tty->driver_data = NULL;
+}
+
+/**
+ * pti_tty_driver_write()-  Write trace debugging data through the char
+ * interface to the PTI HW.  Part of the misc device implementation.
+ *
+ * @filp: Contains private data which is used to obtain
+ *        master, channel write ID.
+ * @data: trace data to be written.
+ * @len:  # of byte to write.
+ *
+ * Returns:
+ *	int, # of bytes written
+ *	otherwise, error
+ */
+static int pti_tty_driver_write(struct tty_struct *tty,
+	const unsigned char *buf, int len)
+{
+	struct pti_tty *pti_tty_data = tty->driver_data;
+	if ((pti_tty_data != NULL) && (pti_tty_data->mc != NULL)) {
+		pti_write_to_aperture(pti_tty_data->mc, (u8 *)buf, len);
+		return len;
+	}
+	/*
+	 * we can't write to the pti hardware if the private driver_data
+	 * and the mc address is not there.
+	 */
+	else
+		return -EFAULT;
+}
+
+/**
+ * pti_tty_write_room()- Always returns 2048.
+ *
+ * @tty: contains tty info of the pti driver.
+ */
+static int pti_tty_write_room(struct tty_struct *tty)
+{
+	return 2048;
+}
+
+/**
+ * pti_char_open()- Open an Application master, channel aperture
+ * ID to the PTI device. Part of the misc device implementation.
+ *
+ * @inode: not used.
+ * @filp:  Output- will have a masterchannel struct set containing
+ *                 the allocated application PTI aperture write address.
+ *
+ * Returns:
+ *	int, 0 for success
+ *	otherwise, a fail value
+ */
+static int pti_char_open(struct inode *inode, struct file *filp)
+{
+	struct pti_masterchannel *mc;
+
+	/*
+	 * We really do want to fail immediately if
+	 * pti_request_masterchannel() fails,
+	 * before assigning the value to filp->private_data.
+	 * Slightly easier to debug if this driver needs debugging.
+	 */
+	mc = pti_request_masterchannel(0);
+	if (mc == NULL)
+		return -ENOMEM;
+	filp->private_data = mc;
+	return 0;
+}
+
+/**
+ * pti_char_release()-  Close a char channel to the PTI device. Part
+ * of the misc device implementation.
+ *
+ * @inode: Not used in this implementaiton.
+ * @filp:  Contains private_data that contains the master, channel
+ *         ID to be released by the PTI device.
+ *
+ * Returns:
+ *	always 0
+ */
+static int pti_char_release(struct inode *inode, struct file *filp)
+{
+	pti_release_masterchannel(filp->private_data);
+	kfree(filp->private_data);
+	return 0;
+}
+
+/**
+ * pti_char_write()-  Write trace debugging data through the char
+ * interface to the PTI HW.  Part of the misc device implementation.
+ *
+ * @filp:  Contains private data which is used to obtain
+ *         master, channel write ID.
+ * @data:  trace data to be written.
+ * @len:   # of byte to write.
+ * @ppose: Not used in this function implementation.
+ *
+ * Returns:
+ *	int, # of bytes written
+ *	otherwise, error value
+ *
+ * Notes: From side discussions with Alan Cox and experimenting
+ * with PTI debug HW like Nokia's Fido box and Lauterbach
+ * devices, 8192 byte write buffer used by USER_COPY_SIZE was
+ * deemed an appropriate size for this type of usage with
+ * debugging HW.
+ */
+static ssize_t pti_char_write(struct file *filp, const char __user *data,
+			      size_t len, loff_t *ppose)
+{
+	struct pti_masterchannel *mc;
+	void *kbuf;
+	const char __user *tmp;
+	size_t size = USER_COPY_SIZE;
+	size_t n = 0;
+
+	tmp = data;
+	mc = filp->private_data;
+
+	kbuf = kmalloc(size, GFP_KERNEL);
+	if (kbuf == NULL)  {
+		pr_err("%s(%d): buf allocation failed\n",
+			__func__, __LINE__);
+		return -ENOMEM;
+	}
+
+	do {
+		if (len - n > USER_COPY_SIZE)
+			size = USER_COPY_SIZE;
+		else
+			size = len - n;
+
+		if (copy_from_user(kbuf, tmp, size)) {
+			kfree(kbuf);
+			return n ? n : -EFAULT;
+		}
+
+		pti_write_to_aperture(mc, kbuf, size);
+		n  += size;
+		tmp += size;
+
+	} while (len > n);
+
+	kfree(kbuf);
+	return len;
+}
+
+static const struct tty_operations pti_tty_driver_ops = {
+	.open		= pti_tty_driver_open,
+	.close		= pti_tty_driver_close,
+	.write		= pti_tty_driver_write,
+	.write_room	= pti_tty_write_room,
+	.install	= pti_tty_install,
+	.cleanup	= pti_tty_cleanup
+};
+
+static const struct file_operations pti_char_driver_ops = {
+	.owner		= THIS_MODULE,
+	.write		= pti_char_write,
+	.open		= pti_char_open,
+	.release	= pti_char_release,
+};
+
+static struct miscdevice pti_char_driver = {
+	.minor		= MISC_DYNAMIC_MINOR,
+	.name		= CHARNAME,
+	.fops		= &pti_char_driver_ops
+};
+
+/**
+ * pti_console_write()-  Write to the console that has been acquired.
+ *
+ * @c:   Not used in this implementaiton.
+ * @buf: Data to be written.
+ * @len: Length of buf.
+ */
+static void pti_console_write(struct console *c, const char *buf, unsigned len)
+{
+	static struct pti_masterchannel mc = {.master  = CONSOLE_ID,
+					      .channel = 0};
+
+	mc.channel = pti_console_channel;
+	pti_console_channel = (pti_console_channel + 1) & 0x7f;
+
+	pti_write_full_frame_to_aperture(&mc, buf, len);
+}
+
+/**
+ * pti_console_device()-  Return the driver tty structure and set the
+ *			  associated index implementation.
+ *
+ * @c:     Console device of the driver.
+ * @index: index associated with c.
+ *
+ * Returns:
+ *	always value of pti_tty_driver structure when this function
+ *	is called.
+ */
+static struct tty_driver *pti_console_device(struct console *c, int *index)
+{
+	*index = c->index;
+	return pti_tty_driver;
+}
+
+/**
+ * pti_console_setup()-  Initialize console variables used by the driver.
+ *
+ * @c:     Not used.
+ * @opts:  Not used.
+ *
+ * Returns:
+ *	always 0.
+ */
+static int pti_console_setup(struct console *c, char *opts)
+{
+	pti_console_channel = 0;
+	pti_control_channel = 0;
+	return 0;
+}
+
+/*
+ * pti_console struct, used to capture OS printk()'s and shift
+ * out to the PTI device for debugging.  This cannot be
+ * enabled upon boot because of the possibility of eating
+ * any serial console printk's (race condition discovered).
+ * The console should be enabled upon when the tty port is
+ * used for the first time.  Since the primary purpose for
+ * the tty port is to hook up syslog to it, the tty port
+ * will be open for a really long time.
+ */
+static struct console pti_console = {
+	.name		= TTYNAME,
+	.write		= pti_console_write,
+	.device		= pti_console_device,
+	.setup		= pti_console_setup,
+	.flags		= CON_PRINTBUFFER,
+	.index		= 0,
+};
+
+/**
+ * pti_port_activate()- Used to start/initialize any items upon
+ * first opening of tty_port().
+ *
+ * @port- The tty port number of the PTI device.
+ * @tty-  The tty struct associated with this device.
+ *
+ * Returns:
+ *	always returns 0
+ *
+ * Notes: The primary purpose of the PTI tty port 0 is to hook
+ * the syslog daemon to it; thus this port will be open for a
+ * very long time.
+ */
+static int pti_port_activate(struct tty_port *port, struct tty_struct *tty)
+{
+	if (port->tty->index == PTITTY_MINOR_START)
+		console_start(&pti_console);
+	return 0;
+}
+
+/**
+ * pti_port_shutdown()- Used to stop/shutdown any items upon the
+ * last tty port close.
+ *
+ * @port- The tty port number of the PTI device.
+ *
+ * Notes: The primary purpose of the PTI tty port 0 is to hook
+ * the syslog daemon to it; thus this port will be open for a
+ * very long time.
+ */
+static void pti_port_shutdown(struct tty_port *port)
+{
+	if (port->tty->index == PTITTY_MINOR_START)
+		console_stop(&pti_console);
+}
+
+static const struct tty_port_operations tty_port_ops = {
+	.activate = pti_port_activate,
+	.shutdown = pti_port_shutdown,
+};
+
+/*
+ * Note the _probe() call sets everything up and ties the char and tty
+ * to successfully detecting the PTI device on the pci bus.
+ */
+
+/**
+ * pti_pci_probe()- Used to detect pti on the pci bus and set
+ *		    things up in the driver.
+ *
+ * @pdev- pci_dev struct values for pti.
+ * @ent-  pci_device_id struct for pti driver.
+ *
+ * Returns:
+ *	0 for success
+ *	otherwise, error
+ */
+static int __devinit pti_pci_probe(struct pci_dev *pdev,
+		const struct pci_device_id *ent)
+{
+	int retval = -EINVAL;
+	int pci_bar = 1;
+
+	dev_dbg(&pdev->dev, "%s %s(%d): PTI PCI ID %04x:%04x\n", __FILE__,
+			__func__, __LINE__, pdev->vendor, pdev->device);
+
+	retval = misc_register(&pti_char_driver);
+	if (retval) {
+		pr_err("%s(%d): CHAR registration failed of pti driver\n",
+			__func__, __LINE__);
+		pr_err("%s(%d): Error value returned: %d\n",
+			__func__, __LINE__, retval);
+		return retval;
+	}
+
+	retval = pci_enable_device(pdev);
+	if (retval != 0) {
+		dev_err(&pdev->dev,
+			"%s: pci_enable_device() returned error %d\n",
+			__func__, retval);
+		return retval;
+	}
+
+	drv_data = kzalloc(sizeof(*drv_data), GFP_KERNEL);
+
+	if (drv_data == NULL) {
+		retval = -ENOMEM;
+		dev_err(&pdev->dev,
+			"%s(%d): kmalloc() returned NULL memory.\n",
+			__func__, __LINE__);
+		return retval;
+	}
+	drv_data->pti_addr = pci_resource_start(pdev, pci_bar);
+
+	retval = pci_request_region(pdev, pci_bar, dev_name(&pdev->dev));
+	if (retval != 0) {
+		dev_err(&pdev->dev,
+			"%s(%d): pci_request_region() returned error %d\n",
+			__func__, __LINE__, retval);
+		kfree(drv_data);
+		return retval;
+	}
+	drv_data->aperture_base = drv_data->pti_addr+APERTURE_14;
+	drv_data->pti_ioaddr =
+		ioremap_nocache((u32)drv_data->aperture_base,
+		APERTURE_LEN);
+	if (!drv_data->pti_ioaddr) {
+		pci_release_region(pdev, pci_bar);
+		retval = -ENOMEM;
+		kfree(drv_data);
+		return retval;
+	}
+
+	pci_set_drvdata(pdev, drv_data);
+
+	tty_port_init(&drv_data->port);
+	drv_data->port.ops = &tty_port_ops;
+
+	tty_register_device(pti_tty_driver, 0, &pdev->dev);
+	tty_register_device(pti_tty_driver, 1, &pdev->dev);
+
+	register_console(&pti_console);
+
+	return retval;
+}
+
+static struct pci_driver pti_pci_driver = {
+	.name		= PCINAME,
+	.id_table	= pci_ids,
+	.probe		= pti_pci_probe,
+	.remove		= pti_pci_remove,
+};
+
+/**
+ *
+ * pti_init()- Overall entry/init call to the pti driver.
+ *             It starts the registration process with the kernel.
+ *
+ * Returns:
+ *	int __init, 0 for success
+ *	otherwise value is an error
+ *
+ */
+static int __init pti_init(void)
+{
+	int retval = -EINVAL;
+
+	/* First register module as tty device */
+
+	pti_tty_driver = alloc_tty_driver(1);
+	if (pti_tty_driver == NULL) {
+		pr_err("%s(%d): Memory allocation failed for ptiTTY driver\n",
+			__func__, __LINE__);
+		return -ENOMEM;
+	}
+
+	pti_tty_driver->owner			= THIS_MODULE;
+	pti_tty_driver->magic			= TTY_DRIVER_MAGIC;
+	pti_tty_driver->driver_name		= DRIVERNAME;
+	pti_tty_driver->name			= TTYNAME;
+	pti_tty_driver->major			= 0;
+	pti_tty_driver->minor_start		= PTITTY_MINOR_START;
+	pti_tty_driver->minor_num		= PTITTY_MINOR_NUM;
+	pti_tty_driver->num			= PTITTY_MINOR_NUM;
+	pti_tty_driver->type			= TTY_DRIVER_TYPE_SYSTEM;
+	pti_tty_driver->subtype			= SYSTEM_TYPE_SYSCONS;
+	pti_tty_driver->flags			= TTY_DRIVER_REAL_RAW |
+						  TTY_DRIVER_DYNAMIC_DEV;
+	pti_tty_driver->init_termios		= tty_std_termios;
+
+	tty_set_operations(pti_tty_driver, &pti_tty_driver_ops);
+
+	retval = tty_register_driver(pti_tty_driver);
+	if (retval) {
+		pr_err("%s(%d): TTY registration failed of pti driver\n",
+			__func__, __LINE__);
+		pr_err("%s(%d): Error value returned: %d\n",
+			__func__, __LINE__, retval);
+
+		pti_tty_driver = NULL;
+		return retval;
+	}
+
+	retval = pci_register_driver(&pti_pci_driver);
+
+	if (retval) {
+		pr_err("%s(%d): PCI registration failed of pti driver\n",
+			__func__, __LINE__);
+		pr_err("%s(%d): Error value returned: %d\n",
+			__func__, __LINE__, retval);
+
+		tty_unregister_driver(pti_tty_driver);
+		pr_err("%s(%d): Unregistering TTY part of pti driver\n",
+			__func__, __LINE__);
+		pti_tty_driver = NULL;
+		return retval;
+	}
+
+	return retval;
+}
+
+/**
+ * pti_exit()- Unregisters this module as a tty and pci driver.
+ */
+static void __exit pti_exit(void)
+{
+	int retval;
+
+	tty_unregister_device(pti_tty_driver, 0);
+	tty_unregister_device(pti_tty_driver, 1);
+
+	retval = tty_unregister_driver(pti_tty_driver);
+	if (retval) {
+		pr_err("%s(%d): TTY unregistration failed of pti driver\n",
+			__func__, __LINE__);
+		pr_err("%s(%d): Error value returned: %d\n",
+			__func__, __LINE__, retval);
+	}
+
+	pci_unregister_driver(&pti_pci_driver);
+
+	retval = misc_deregister(&pti_char_driver);
+	if (retval) {
+		pr_err("%s(%d): CHAR unregistration failed of pti driver\n",
+			__func__, __LINE__);
+		pr_err("%s(%d): Error value returned: %d\n",
+			__func__, __LINE__, retval);
+	}
+
+	unregister_console(&pti_console);
+	return;
+}
+
+module_init(pti_init);
+module_exit(pti_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Ken Mills, Jay Freyensee");
+MODULE_DESCRIPTION("PTI Driver");
+
diff --git a/drivers/misc/ti-st/st_core.c b/drivers/misc/ti-st/st_core.c
index f91f82eabda..1a05fe08e2c 100644
--- a/drivers/misc/ti-st/st_core.c
+++ b/drivers/misc/ti-st/st_core.c
@@ -747,8 +747,8 @@ static void st_tty_close(struct tty_struct *tty)
 	pr_debug("%s: done ", __func__);
 }
 
-static void st_tty_receive(struct tty_struct *tty, const unsigned char *data,
-			   char *tty_flags, int count)
+static unsigned int st_tty_receive(struct tty_struct *tty,
+		const unsigned char *data, char *tty_flags, int count)
 {
 #ifdef VERBOSE
 	print_hex_dump(KERN_DEBUG, ">in>", DUMP_PREFIX_NONE,
@@ -761,6 +761,8 @@ static void st_tty_receive(struct tty_struct *tty, const unsigned char *data,
 	 */
 	st_recv(tty->disc_data, data, count);
 	pr_debug("done %s", __func__);
+
+	return count;
 }
 
 /* wake-up function called in from the TTY layer