Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc: (25 commits)
  atmel-mci: add MCI2 register definitions
  atmel-mci: Integrate AT91 specific definition in header file
  tmio_mmc: allow compilation for ASIC3
  mmc_block: do not DMA to stack
  sdhci: Print ADMA status and pointer on debug
  tmio_mmc: fix clock setup
  tmio_mmc: map SD control registers after enabling the MFD cell
  tmio_mmc: correct probe return value for num_resources != 3
  tmio_mmc: don't use set_irq_type
  tmio_mmc: add bus_shift support
  MFD,mmc: tmio_mmc: make HCLK configurable
  mmc_spi: don't use EINVAL for possible transmission errors
  cb710: more cleanup for the DEBUG case.
  sdhci: platform driver for SDHCI
  mxcmmc: remove frequency workaround
  cb710: handle DEBUG define in Makefile
  cb710: add missing parenthesis
  cb710: fix printk format string
  mmc: Driver for CB710/720 memory card reader (MMC part)
  pxamci: add regulator support.
  ...

1 files changed, 33 insertions, 25 deletions

diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 9234be2226e..35789c6edc1 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -78,6 +78,11 @@ static void sdhci_dumpregs(struct sdhci_host *host)
 		sdhci_readl(host, SDHCI_CAPABILITIES),
 		sdhci_readl(host, SDHCI_MAX_CURRENT));
 
+	if (host->flags & SDHCI_USE_ADMA)
+		printk(KERN_DEBUG DRIVER_NAME ": ADMA Err: 0x%08x | ADMA Ptr: 0x%08x\n",
+		       readl(host->ioaddr + SDHCI_ADMA_ERROR),
+		       readl(host->ioaddr + SDHCI_ADMA_ADDRESS));
+
 	printk(KERN_DEBUG DRIVER_NAME ": ===========================================\n");
 }
 
@@ -1005,12 +1010,34 @@ static void sdhci_set_power(struct sdhci_host *host, unsigned short power)
 {
 	u8 pwr;
 
-	if (host->power == power)
+	if (power == (unsigned short)-1)
+		pwr = 0;
+	else {
+		switch (1 << power) {
+		case MMC_VDD_165_195:
+			pwr = SDHCI_POWER_180;
+			break;
+		case MMC_VDD_29_30:
+		case MMC_VDD_30_31:
+			pwr = SDHCI_POWER_300;
+			break;
+		case MMC_VDD_32_33:
+		case MMC_VDD_33_34:
+			pwr = SDHCI_POWER_330;
+			break;
+		default:
+			BUG();
+		}
+	}
+
+	if (host->pwr == pwr)
 		return;
 
-	if (power == (unsigned short)-1) {
+	host->pwr = pwr;
+
+	if (pwr == 0) {
 		sdhci_writeb(host, 0, SDHCI_POWER_CONTROL);
-		goto out;
+		return;
 	}
 
 	/*
@@ -1020,35 +1047,16 @@ static void sdhci_set_power(struct sdhci_host *host, unsigned short power)
 	if (!(host->quirks & SDHCI_QUIRK_SINGLE_POWER_WRITE))
 		sdhci_writeb(host, 0, SDHCI_POWER_CONTROL);
 
-	pwr = SDHCI_POWER_ON;
-
-	switch (1 << power) {
-	case MMC_VDD_165_195:
-		pwr |= SDHCI_POWER_180;
-		break;
-	case MMC_VDD_29_30:
-	case MMC_VDD_30_31:
-		pwr |= SDHCI_POWER_300;
-		break;
-	case MMC_VDD_32_33:
-	case MMC_VDD_33_34:
-		pwr |= SDHCI_POWER_330;
-		break;
-	default:
-		BUG();
-	}
-
 	/*
 	 * At least the Marvell CaFe chip gets confused if we set the voltage
 	 * and set turn on power at the same time, so set the voltage first.
 	 */
 	if ((host->quirks & SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER))
-		sdhci_writeb(host, pwr & ~SDHCI_POWER_ON, SDHCI_POWER_CONTROL);
+		sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL);
 
-	sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL);
+	pwr |= SDHCI_POWER_ON;
 
-out:
-	host->power = power;
+	sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL);
 }
 
 /*****************************************************************************\