Merge tag 'imx-soc' of git://git.pengutronix.de/git/imx/linux-2.6 into next/soc

From Sascha Hauer <s.hauer@pengutronix.de>:

ARM i.MX SoC updates

based on imx-multiplatform branch.

* tag 'imx-soc' of git://git.pengutronix.de/git/imx/linux-2.6:
  ARM i.MX51 babbage: Add display support
  ARM i.MX6: Add IPU support
  ARM i.MX51: Add IPU support
  ARM i.MX53: Add IPU support
  ARM i.MX5: switch IPU clk support to devicetree bindings
  ARM i.MX6: fix ldb_di_sel mux
  ARM i.MX51: setup MIPI during startup
  mx2_camera: Fix regression caused by clock conversion
  ARM: clk-imx27: Add missing clock for mx2-camera
  ARM i.MX27: Fix low reference clock path
  ARM: dts: imx27-3ds: Remove local watchdog inclusion
  watchdog: Support imx watchdog on SOC_IMX53
  ARM: mach-imx: Support for DryIce RTC in i.MX53
  ARM : i.MX27 : split code for allocation of ressources of camera and eMMA

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

1 files changed, 28 insertions, 16 deletions

diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 7922adb4238..c7851c0aabc 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -1315,16 +1315,19 @@ static void sdhci_request(struct mmc_host *mmc, struct mmc_request *mrq)
 		 */
 		if ((host->flags & SDHCI_NEEDS_RETUNING) &&
 		    !(present_state & (SDHCI_DOING_WRITE | SDHCI_DOING_READ))) {
-			/* eMMC uses cmd21 while sd and sdio use cmd19 */
-			tuning_opcode = mmc->card->type == MMC_TYPE_MMC ?
-				MMC_SEND_TUNING_BLOCK_HS200 :
-				MMC_SEND_TUNING_BLOCK;
-			spin_unlock_irqrestore(&host->lock, flags);
-			sdhci_execute_tuning(mmc, tuning_opcode);
-			spin_lock_irqsave(&host->lock, flags);
-
-			/* Restore original mmc_request structure */
-			host->mrq = mrq;
+			if (mmc->card) {
+				/* eMMC uses cmd21 but sd and sdio use cmd19 */
+				tuning_opcode =
+					mmc->card->type == MMC_TYPE_MMC ?
+					MMC_SEND_TUNING_BLOCK_HS200 :
+					MMC_SEND_TUNING_BLOCK;
+				spin_unlock_irqrestore(&host->lock, flags);
+				sdhci_execute_tuning(mmc, tuning_opcode);
+				spin_lock_irqsave(&host->lock, flags);
+
+				/* Restore original mmc_request structure */
+				host->mrq = mrq;
+			}
 		}
 
 		if (mrq->sbc && !(host->flags & SDHCI_AUTO_CMD23))
@@ -2837,6 +2840,9 @@ int sdhci_add_host(struct sdhci_host *host)
 	if (!(host->quirks & SDHCI_QUIRK_FORCE_1_BIT_DATA))
 		mmc->caps |= MMC_CAP_4_BIT_DATA;
 
+	if (host->quirks2 & SDHCI_QUIRK2_HOST_NO_CMD23)
+		mmc->caps &= ~MMC_CAP_CMD23;
+
 	if (caps[0] & SDHCI_CAN_DO_HISPD)
 		mmc->caps |= MMC_CAP_SD_HIGHSPEED | MMC_CAP_MMC_HIGHSPEED;
 
@@ -2846,9 +2852,12 @@ int sdhci_add_host(struct sdhci_host *host)
 
 	/* If vqmmc regulator and no 1.8V signalling, then there's no UHS */
 	host->vqmmc = regulator_get(mmc_dev(mmc), "vqmmc");
-	if (IS_ERR(host->vqmmc)) {
-		pr_info("%s: no vqmmc regulator found\n", mmc_hostname(mmc));
-		host->vqmmc = NULL;
+	if (IS_ERR_OR_NULL(host->vqmmc)) {
+		if (PTR_ERR(host->vqmmc) < 0) {
+			pr_info("%s: no vqmmc regulator found\n",
+				mmc_hostname(mmc));
+			host->vqmmc = NULL;
+		}
 	}
 	else if (regulator_is_supported_voltage(host->vqmmc, 1800000, 1800000))
 		regulator_enable(host->vqmmc);
@@ -2904,9 +2913,12 @@ int sdhci_add_host(struct sdhci_host *host)
 	ocr_avail = 0;
 
 	host->vmmc = regulator_get(mmc_dev(mmc), "vmmc");
-	if (IS_ERR(host->vmmc)) {
-		pr_info("%s: no vmmc regulator found\n", mmc_hostname(mmc));
-		host->vmmc = NULL;
+	if (IS_ERR_OR_NULL(host->vmmc)) {
+		if (PTR_ERR(host->vmmc) < 0) {
+			pr_info("%s: no vmmc regulator found\n",
+				mmc_hostname(mmc));
+			host->vmmc = NULL;
+		}
 	} else
 		regulator_enable(host->vmmc);