Merge commit 'v3.1-rc4' into next

1 files changed, 51 insertions, 30 deletions

diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 58d5436ff64..0e02cc1df12 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -127,11 +127,15 @@ static void sdhci_mask_irqs(struct sdhci_host *host, u32 irqs)
 
 static void sdhci_set_card_detection(struct sdhci_host *host, bool enable)
 {
-	u32 irqs = SDHCI_INT_CARD_REMOVE | SDHCI_INT_CARD_INSERT;
+	u32 present, irqs;
 
 	if (host->quirks & SDHCI_QUIRK_BROKEN_CARD_DETECTION)
 		return;
 
+	present = sdhci_readl(host, SDHCI_PRESENT_STATE) &
+			      SDHCI_CARD_PRESENT;
+	irqs = present ? SDHCI_INT_CARD_REMOVE : SDHCI_INT_CARD_INSERT;
+
 	if (enable)
 		sdhci_unmask_irqs(host, irqs);
 	else
@@ -624,12 +628,11 @@ static u8 sdhci_calc_timeout(struct sdhci_host *host, struct mmc_command *cmd)
 	/* timeout in us */
 	if (!data)
 		target_timeout = cmd->cmd_timeout_ms * 1000;
-	else
-		target_timeout = data->timeout_ns / 1000 +
-			data->timeout_clks / host->clock;
-
-	if (host->quirks & SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK)
-		host->timeout_clk = host->clock / 1000;
+	else {
+		target_timeout = data->timeout_ns / 1000;
+		if (host->clock)
+			target_timeout += data->timeout_clks / host->clock;
+	}
 
 	/*
 	 * Figure out needed cycles.
@@ -641,7 +644,6 @@ static u8 sdhci_calc_timeout(struct sdhci_host *host, struct mmc_command *cmd)
 	 *     =>
 	 *     (1) / (2) > 2^6
 	 */
-	BUG_ON(!host->timeout_clk);
 	count = 0;
 	current_timeout = (1 << 13) * 1000 / host->timeout_clk;
 	while (current_timeout < target_timeout) {
@@ -1863,9 +1865,6 @@ static void sdhci_tasklet_finish(unsigned long param)
 
 	del_timer(&host->timer);
 
-	if (host->version >= SDHCI_SPEC_300)
-		del_timer(&host->tuning_timer);
-
 	mrq = host->mrq;
 
 	/*
@@ -2154,13 +2153,30 @@ static irqreturn_t sdhci_irq(int irq, void *dev_id)
 		mmc_hostname(host->mmc), intmask);
 
 	if (intmask & (SDHCI_INT_CARD_INSERT | SDHCI_INT_CARD_REMOVE)) {
+		u32 present = sdhci_readl(host, SDHCI_PRESENT_STATE) &
+			      SDHCI_CARD_PRESENT;
+
+		/*
+		 * There is a observation on i.mx esdhc.  INSERT bit will be
+		 * immediately set again when it gets cleared, if a card is
+		 * inserted.  We have to mask the irq to prevent interrupt
+		 * storm which will freeze the system.  And the REMOVE gets
+		 * the same situation.
+		 *
+		 * More testing are needed here to ensure it works for other
+		 * platforms though.
+		 */
+		sdhci_mask_irqs(host, present ? SDHCI_INT_CARD_INSERT :
+						SDHCI_INT_CARD_REMOVE);
+		sdhci_unmask_irqs(host, present ? SDHCI_INT_CARD_REMOVE :
+						  SDHCI_INT_CARD_INSERT);
+
 		sdhci_writel(host, intmask & (SDHCI_INT_CARD_INSERT |
-			SDHCI_INT_CARD_REMOVE), SDHCI_INT_STATUS);
+			     SDHCI_INT_CARD_REMOVE), SDHCI_INT_STATUS);
+		intmask &= ~(SDHCI_INT_CARD_INSERT | SDHCI_INT_CARD_REMOVE);
 		tasklet_schedule(&host->card_tasklet);
 	}
 
-	intmask &= ~(SDHCI_INT_CARD_INSERT | SDHCI_INT_CARD_REMOVE);
-
 	if (intmask & SDHCI_INT_CMD_MASK) {
 		sdhci_writel(host, intmask & SDHCI_INT_CMD_MASK,
 			SDHCI_INT_STATUS);
@@ -2440,22 +2456,6 @@ int sdhci_add_host(struct sdhci_host *host)
 		host->max_clk = host->ops->get_max_clock(host);
 	}
 
-	host->timeout_clk =
-		(caps[0] & SDHCI_TIMEOUT_CLK_MASK) >> SDHCI_TIMEOUT_CLK_SHIFT;
-	if (host->timeout_clk == 0) {
-		if (host->ops->get_timeout_clock) {
-			host->timeout_clk = host->ops->get_timeout_clock(host);
-		} else if (!(host->quirks &
-				SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK)) {
-			printk(KERN_ERR
-			       "%s: Hardware doesn't specify timeout clock "
-			       "frequency.\n", mmc_hostname(mmc));
-			return -ENODEV;
-		}
-	}
-	if (caps[0] & SDHCI_TIMEOUT_CLK_UNIT)
-		host->timeout_clk *= 1000;
-
 	/*
 	 * In case of Host Controller v3.00, find out whether clock
 	 * multiplier is supported.
@@ -2488,6 +2488,27 @@ int sdhci_add_host(struct sdhci_host *host)
 	} else
 		mmc->f_min = host->max_clk / SDHCI_MAX_DIV_SPEC_200;
 
+	host->timeout_clk =
+		(caps[0] & SDHCI_TIMEOUT_CLK_MASK) >> SDHCI_TIMEOUT_CLK_SHIFT;
+	if (host->timeout_clk == 0) {
+		if (host->ops->get_timeout_clock) {
+			host->timeout_clk = host->ops->get_timeout_clock(host);
+		} else if (!(host->quirks &
+				SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK)) {
+			printk(KERN_ERR
+			       "%s: Hardware doesn't specify timeout clock "
+			       "frequency.\n", mmc_hostname(mmc));
+			return -ENODEV;
+		}
+	}
+	if (caps[0] & SDHCI_TIMEOUT_CLK_UNIT)
+		host->timeout_clk *= 1000;
+
+	if (host->quirks & SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK)
+		host->timeout_clk = mmc->f_max / 1000;
+
+	mmc->max_discard_to = (1 << 27) / host->timeout_clk;
+
 	mmc->caps |= MMC_CAP_SDIO_IRQ | MMC_CAP_ERASE | MMC_CAP_CMD23;
 
 	if (host->quirks & SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12)