diff options
author | Philip Rakity <prakity@marvell.com> | 2010-11-19 16:48:39 -0500 |
---|---|---|
committer | Chris Ball <cjb@laptop.org> | 2010-11-22 15:12:04 -0500 |
commit | 15ec44611904be0dcc97b84c29fbf964e5e2b36f (patch) | |
tree | d64384c6bf47beee40172419a29b09c2943e964e /drivers/mmc/host/sdhci.h | |
parent | ed919b0125b26dcc052e44836f66e7e1f5c49c7e (diff) |
mmc: sdhci: 8-bit bus width changes
We now:
* check for a v3 controller before setting 8-bit bus width
* offer a callback for platform code to switch to 8-bit mode, which
allows non-v3 controllers to support it
* rely on mmc->caps |= MMC_CAP_8_BIT_DATA; in platform code to specify
that the board designers have indeed brought out all the pins for
8-bit to the slot.
We were previously relying only on whether the *controller* supported
8-bit, which doesn't tell us anything about the pin configuration in
the board design.
This fixes the MMC card regression reported by Maxim Levitsky here:
http://thread.gmane.org/gmane.linux.kernel.mmc/4336
by no longer assuming that 8-bit works by default.
Signed-off-by: Philip Rakity <prakity@marvell.com>
Tested-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
Diffstat (limited to 'drivers/mmc/host/sdhci.h')
-rw-r--r-- | drivers/mmc/host/sdhci.h | 5 |
1 files changed, 4 insertions, 1 deletions
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h index d52a7163b97..e42d7f00c06 100644 --- a/drivers/mmc/host/sdhci.h +++ b/drivers/mmc/host/sdhci.h @@ -76,7 +76,7 @@ #define SDHCI_CTRL_ADMA1 0x08 #define SDHCI_CTRL_ADMA32 0x10 #define SDHCI_CTRL_ADMA64 0x18 -#define SDHCI_CTRL_8BITBUS 0x20 +#define SDHCI_CTRL_8BITBUS 0x20 #define SDHCI_POWER_CONTROL 0x29 #define SDHCI_POWER_ON 0x01 @@ -155,6 +155,7 @@ #define SDHCI_CLOCK_BASE_SHIFT 8 #define SDHCI_MAX_BLOCK_MASK 0x00030000 #define SDHCI_MAX_BLOCK_SHIFT 16 +#define SDHCI_CAN_DO_8BIT 0x00040000 #define SDHCI_CAN_DO_ADMA2 0x00080000 #define SDHCI_CAN_DO_ADMA1 0x00100000 #define SDHCI_CAN_DO_HISPD 0x00200000 @@ -215,6 +216,8 @@ struct sdhci_ops { unsigned int (*get_max_clock)(struct sdhci_host *host); unsigned int (*get_min_clock)(struct sdhci_host *host); unsigned int (*get_timeout_clock)(struct sdhci_host *host); + int (*platform_8bit_width)(struct sdhci_host *host, + int width); void (*platform_send_init_74_clocks)(struct sdhci_host *host, u8 power_mode); unsigned int (*get_ro)(struct sdhci_host *host); |