mmc: tmio: split core functionality, DMA and MFD glue

TMIO MMC chips contain an SD / SDIO IP core from Panasonic, similar to
the one, used in MN5774 and other MN57xx controllers. These IP cores are
included in many multifunction devices, in sh-mobile chips from Renesas,
in the latter case they can also use DMA. Some sh-mobile implementations
also have some other specialities, that MFD-based solutions don't have.
This makes supporting all these features in a monolithic driver inconveniet
and error-prone. This patch splits the driver into 3 parts: the core,
the MFD glue and the DMA support. In case of a modular build, two modules
will be built: mmc_tmio_core and mmc_tmio.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Chris Ball <cjb@laptop.org>

1 files changed, 18 insertions, 1285 deletions

diff --git a/drivers/mmc/host/tmio_mmc.c b/drivers/mmc/host/tmio_mmc.c
index 32ab1452d97..79c568461d5 100644
--- a/drivers/mmc/host/tmio_mmc.c
+++ b/drivers/mmc/host/tmio_mmc.c
@@ -1,8 +1,8 @@
 /*
- *  linux/drivers/mmc/tmio_mmc.c
+ * linux/drivers/mmc/host/tmio_mmc.c
  *
- *  Copyright (C) 2004 Ian Molton
- *  Copyright (C) 2007 Ian Molton
+ * Copyright (C) 2007 Ian Molton
+ * Copyright (C) 2004 Ian Molton
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -11,1200 +11,17 @@
  * Driver for the MMC / SD / SDIO cell found in:
  *
  * TC6393XB TC6391XB TC6387XB T7L66XB ASIC3
- *
- * This driver draws mainly on scattered spec sheets, Reverse engineering
- * of the toshiba e800  SD driver and some parts of the 2.4 ASIC3 driver (4 bit
- * support). (Further 4 bit support from a later datasheet).
- *
- * TODO:
- *   Investigate using a workqueue for PIO transfers
- *   Eliminate FIXMEs
- *   SDIO support
- *   Better Power management
- *   Handle MMC errors better
- *   double buffer support
- *
  */
 
-#include <linux/delay.h>
 #include <linux/device.h>
-#include <linux/dmaengine.h>
-#include <linux/highmem.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/irq.h>
 #include <linux/mfd/core.h>
 #include <linux/mfd/tmio.h>
 #include <linux/mmc/host.h>
 #include <linux/module.h>
 #include <linux/pagemap.h>
 #include <linux/scatterlist.h>
-#include <linux/workqueue.h>
-#include <linux/spinlock.h>
-
-#define CTL_SD_CMD 0x00
-#define CTL_ARG_REG 0x04
-#define CTL_STOP_INTERNAL_ACTION 0x08
-#define CTL_XFER_BLK_COUNT 0xa
-#define CTL_RESPONSE 0x0c
-#define CTL_STATUS 0x1c
-#define CTL_IRQ_MASK 0x20
-#define CTL_SD_CARD_CLK_CTL 0x24
-#define CTL_SD_XFER_LEN 0x26
-#define CTL_SD_MEM_CARD_OPT 0x28
-#define CTL_SD_ERROR_DETAIL_STATUS 0x2c
-#define CTL_SD_DATA_PORT 0x30
-#define CTL_TRANSACTION_CTL 0x34
-#define CTL_SDIO_STATUS 0x36
-#define CTL_SDIO_IRQ_MASK 0x38
-#define CTL_RESET_SD 0xe0
-#define CTL_SDIO_REGS 0x100
-#define CTL_CLK_AND_WAIT_CTL 0x138
-#define CTL_RESET_SDIO 0x1e0
-
-/* Definitions for values the CTRL_STATUS register can take. */
-#define TMIO_STAT_CMDRESPEND    0x00000001
-#define TMIO_STAT_DATAEND       0x00000004
-#define TMIO_STAT_CARD_REMOVE   0x00000008
-#define TMIO_STAT_CARD_INSERT   0x00000010
-#define TMIO_STAT_SIGSTATE      0x00000020
-#define TMIO_STAT_WRPROTECT     0x00000080
-#define TMIO_STAT_CARD_REMOVE_A 0x00000100
-#define TMIO_STAT_CARD_INSERT_A 0x00000200
-#define TMIO_STAT_SIGSTATE_A    0x00000400
-#define TMIO_STAT_CMD_IDX_ERR   0x00010000
-#define TMIO_STAT_CRCFAIL       0x00020000
-#define TMIO_STAT_STOPBIT_ERR   0x00040000
-#define TMIO_STAT_DATATIMEOUT   0x00080000
-#define TMIO_STAT_RXOVERFLOW    0x00100000
-#define TMIO_STAT_TXUNDERRUN    0x00200000
-#define TMIO_STAT_CMDTIMEOUT    0x00400000
-#define TMIO_STAT_RXRDY         0x01000000
-#define TMIO_STAT_TXRQ          0x02000000
-#define TMIO_STAT_ILL_FUNC      0x20000000
-#define TMIO_STAT_CMD_BUSY      0x40000000
-#define TMIO_STAT_ILL_ACCESS    0x80000000
-
-/* Definitions for values the CTRL_SDIO_STATUS register can take. */
-#define TMIO_SDIO_STAT_IOIRQ	0x0001
-#define TMIO_SDIO_STAT_EXPUB52	0x4000
-#define TMIO_SDIO_STAT_EXWT	0x8000
-#define TMIO_SDIO_MASK_ALL	0xc007
-
-/* Define some IRQ masks */
-/* This is the mask used at reset by the chip */
-#define TMIO_MASK_ALL           0x837f031d
-#define TMIO_MASK_READOP  (TMIO_STAT_RXRDY | TMIO_STAT_DATAEND)
-#define TMIO_MASK_WRITEOP (TMIO_STAT_TXRQ | TMIO_STAT_DATAEND)
-#define TMIO_MASK_CMD     (TMIO_STAT_CMDRESPEND | TMIO_STAT_CMDTIMEOUT | \
-		TMIO_STAT_CARD_REMOVE | TMIO_STAT_CARD_INSERT)
-#define TMIO_MASK_IRQ     (TMIO_MASK_READOP | TMIO_MASK_WRITEOP | TMIO_MASK_CMD)
-
-#define TMIO_MIN_DMA_LEN 8
-
-#define enable_mmc_irqs(host, i) \
-	do { \
-		u32 mask;\
-		mask  = sd_ctrl_read32((host), CTL_IRQ_MASK); \
-		mask &= ~((i) & TMIO_MASK_IRQ); \
-		sd_ctrl_write32((host), CTL_IRQ_MASK, mask); \
-	} while (0)
-
-#define disable_mmc_irqs(host, i) \
-	do { \
-		u32 mask;\
-		mask  = sd_ctrl_read32((host), CTL_IRQ_MASK); \
-		mask |= ((i) & TMIO_MASK_IRQ); \
-		sd_ctrl_write32((host), CTL_IRQ_MASK, mask); \
-	} while (0)
-
-#define ack_mmc_irqs(host, i) \
-	do { \
-		sd_ctrl_write32((host), CTL_STATUS, ~(i)); \
-	} while (0)
-
-/* This is arbitrary, just noone needed any higher alignment yet */
-#define MAX_ALIGN 4
-
-struct tmio_mmc_host {
-	void __iomem *ctl;
-	unsigned long bus_shift;
-	struct mmc_command      *cmd;
-	struct mmc_request      *mrq;
-	struct mmc_data         *data;
-	struct mmc_host         *mmc;
-	int                     irq;
-	unsigned int		sdio_irq_enabled;
-
-	/* Callbacks for clock / power control */
-	void (*set_pwr)(struct platform_device *host, int state);
-	void (*set_clk_div)(struct platform_device *host, int state);
-
-	/* pio related stuff */
-	struct scatterlist      *sg_ptr;
-	struct scatterlist      *sg_orig;
-	unsigned int            sg_len;
-	unsigned int            sg_off;
-
-	struct platform_device *pdev;
-
-	/* DMA support */
-	bool			force_pio;
-	struct dma_chan		*chan_rx;
-	struct dma_chan		*chan_tx;
-	struct tasklet_struct	dma_complete;
-	struct tasklet_struct	dma_issue;
-#ifdef CONFIG_TMIO_MMC_DMA
-	u8			bounce_buf[PAGE_CACHE_SIZE] __attribute__((aligned(MAX_ALIGN)));
-	struct scatterlist	bounce_sg;
-#endif
-
-	/* Track lost interrupts */
-	struct delayed_work	delayed_reset_work;
-	spinlock_t		lock;
-	unsigned long		last_req_ts;
-};
-
-static void tmio_check_bounce_buffer(struct tmio_mmc_host *host);
-
-static u16 sd_ctrl_read16(struct tmio_mmc_host *host, int addr)
-{
-	return readw(host->ctl + (addr << host->bus_shift));
-}
-
-static void sd_ctrl_read16_rep(struct tmio_mmc_host *host, int addr,
-		u16 *buf, int count)
-{
-	readsw(host->ctl + (addr << host->bus_shift), buf, count);
-}
-
-static u32 sd_ctrl_read32(struct tmio_mmc_host *host, int addr)
-{
-	return readw(host->ctl + (addr << host->bus_shift)) |
-	       readw(host->ctl + ((addr + 2) << host->bus_shift)) << 16;
-}
-
-static void sd_ctrl_write16(struct tmio_mmc_host *host, int addr, u16 val)
-{
-	writew(val, host->ctl + (addr << host->bus_shift));
-}
-
-static void sd_ctrl_write16_rep(struct tmio_mmc_host *host, int addr,
-		u16 *buf, int count)
-{
-	writesw(host->ctl + (addr << host->bus_shift), buf, count);
-}
-
-static void sd_ctrl_write32(struct tmio_mmc_host *host, int addr, u32 val)
-{
-	writew(val, host->ctl + (addr << host->bus_shift));
-	writew(val >> 16, host->ctl + ((addr + 2) << host->bus_shift));
-}
-
-static void tmio_mmc_init_sg(struct tmio_mmc_host *host, struct mmc_data *data)
-{
-	host->sg_len = data->sg_len;
-	host->sg_ptr = data->sg;
-	host->sg_orig = data->sg;
-	host->sg_off = 0;
-}
-
-static int tmio_mmc_next_sg(struct tmio_mmc_host *host)
-{
-	host->sg_ptr = sg_next(host->sg_ptr);
-	host->sg_off = 0;
-	return --host->sg_len;
-}
-
-static char *tmio_mmc_kmap_atomic(struct scatterlist *sg, unsigned long *flags)
-{
-	local_irq_save(*flags);
-	return kmap_atomic(sg_page(sg), KM_BIO_SRC_IRQ) + sg->offset;
-}
-
-static void tmio_mmc_kunmap_atomic(struct scatterlist *sg, unsigned long *flags, void *virt)
-{
-	kunmap_atomic(virt - sg->offset, KM_BIO_SRC_IRQ);
-	local_irq_restore(*flags);
-}
-
-#ifdef CONFIG_MMC_DEBUG
-
-#define STATUS_TO_TEXT(a, status, i) \
-	do { \
-		if (status & TMIO_STAT_##a) { \
-			if (i++) \
-				printk(" | "); \
-			printk(#a); \
-		} \
-	} while (0)
-
-void pr_debug_status(u32 status)
-{
-	int i = 0;
-	printk(KERN_DEBUG "status: %08x = ", status);
-	STATUS_TO_TEXT(CARD_REMOVE, status, i);
-	STATUS_TO_TEXT(CARD_INSERT, status, i);
-	STATUS_TO_TEXT(SIGSTATE, status, i);
-	STATUS_TO_TEXT(WRPROTECT, status, i);
-	STATUS_TO_TEXT(CARD_REMOVE_A, status, i);
-	STATUS_TO_TEXT(CARD_INSERT_A, status, i);
-	STATUS_TO_TEXT(SIGSTATE_A, status, i);
-	STATUS_TO_TEXT(CMD_IDX_ERR, status, i);
-	STATUS_TO_TEXT(STOPBIT_ERR, status, i);
-	STATUS_TO_TEXT(ILL_FUNC, status, i);
-	STATUS_TO_TEXT(CMD_BUSY, status, i);
-	STATUS_TO_TEXT(CMDRESPEND, status, i);
-	STATUS_TO_TEXT(DATAEND, status, i);
-	STATUS_TO_TEXT(CRCFAIL, status, i);
-	STATUS_TO_TEXT(DATATIMEOUT, status, i);
-	STATUS_TO_TEXT(CMDTIMEOUT, status, i);
-	STATUS_TO_TEXT(RXOVERFLOW, status, i);
-	STATUS_TO_TEXT(TXUNDERRUN, status, i);
-	STATUS_TO_TEXT(RXRDY, status, i);
-	STATUS_TO_TEXT(TXRQ, status, i);
-	STATUS_TO_TEXT(ILL_ACCESS, status, i);
-	printk("\n");
-}
-
-#else
-#define pr_debug_status(s)  do { } while (0)
-#endif
-
-static void tmio_mmc_enable_sdio_irq(struct mmc_host *mmc, int enable)
-{
-	struct tmio_mmc_host *host = mmc_priv(mmc);
-
-	if (enable) {
-		host->sdio_irq_enabled = 1;
-		sd_ctrl_write16(host, CTL_TRANSACTION_CTL, 0x0001);
-		sd_ctrl_write16(host, CTL_SDIO_IRQ_MASK,
-			(TMIO_SDIO_MASK_ALL & ~TMIO_SDIO_STAT_IOIRQ));
-	} else {
-		sd_ctrl_write16(host, CTL_SDIO_IRQ_MASK, TMIO_SDIO_MASK_ALL);
-		sd_ctrl_write16(host, CTL_TRANSACTION_CTL, 0x0000);
-		host->sdio_irq_enabled = 0;
-	}
-}
-
-static void tmio_mmc_set_clock(struct tmio_mmc_host *host, int new_clock)
-{
-	u32 clk = 0, clock;
-
-	if (new_clock) {
-		for (clock = host->mmc->f_min, clk = 0x80000080;
-			new_clock >= (clock<<1); clk >>= 1)
-			clock <<= 1;
-		clk |= 0x100;
-	}
-
-	if (host->set_clk_div)
-		host->set_clk_div(host->pdev, (clk>>22) & 1);
-
-	sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, clk & 0x1ff);
-}
-
-static void tmio_mmc_clk_stop(struct tmio_mmc_host *host)
-{
-	struct tmio_mmc_data *pdata = mfd_get_data(host->pdev);
-
-	/*
-	 * Testing on sh-mobile showed that SDIO IRQs are unmasked when
-	 * CTL_CLK_AND_WAIT_CTL gets written, so we have to disable the
-	 * device IRQ here and restore the SDIO IRQ mask before
-	 * re-enabling the device IRQ.
-	 */
-	if (pdata->flags & TMIO_MMC_SDIO_IRQ)
-		disable_irq(host->irq);
-	sd_ctrl_write16(host, CTL_CLK_AND_WAIT_CTL, 0x0000);
-	msleep(10);
-	if (pdata->flags & TMIO_MMC_SDIO_IRQ) {
-		tmio_mmc_enable_sdio_irq(host->mmc, host->sdio_irq_enabled);
-		enable_irq(host->irq);
-	}
-	sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, ~0x0100 &
-		sd_ctrl_read16(host, CTL_SD_CARD_CLK_CTL));
-	msleep(10);
-}
-
-static void tmio_mmc_clk_start(struct tmio_mmc_host *host)
-{
-	struct tmio_mmc_data *pdata = mfd_get_data(host->pdev);
-
-	sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, 0x0100 |
-		sd_ctrl_read16(host, CTL_SD_CARD_CLK_CTL));
-	msleep(10);
-	/* see comment in tmio_mmc_clk_stop above */
-	if (pdata->flags & TMIO_MMC_SDIO_IRQ)
-		disable_irq(host->irq);
-	sd_ctrl_write16(host, CTL_CLK_AND_WAIT_CTL, 0x0100);
-	msleep(10);
-	if (pdata->flags & TMIO_MMC_SDIO_IRQ) {
-		tmio_mmc_enable_sdio_irq(host->mmc, host->sdio_irq_enabled);
-		enable_irq(host->irq);
-	}
-}
-
-static void reset(struct tmio_mmc_host *host)
-{
-	/* FIXME - should we set stop clock reg here */
-	sd_ctrl_write16(host, CTL_RESET_SD, 0x0000);
-	sd_ctrl_write16(host, CTL_RESET_SDIO, 0x0000);
-	msleep(10);
-	sd_ctrl_write16(host, CTL_RESET_SD, 0x0001);
-	sd_ctrl_write16(host, CTL_RESET_SDIO, 0x0001);
-	msleep(10);
-}
-
-static void tmio_mmc_reset_work(struct work_struct *work)
-{
-	struct tmio_mmc_host *host = container_of(work, struct tmio_mmc_host,
-						  delayed_reset_work.work);
-	struct mmc_request *mrq;
-	unsigned long flags;
-
-	spin_lock_irqsave(&host->lock, flags);
-	mrq = host->mrq;
-
-	/* request already finished */
-	if (!mrq
-	    || time_is_after_jiffies(host->last_req_ts +
-		msecs_to_jiffies(2000))) {
-		spin_unlock_irqrestore(&host->lock, flags);
-		return;
-	}
-
-	dev_warn(&host->pdev->dev,
-		"timeout waiting for hardware interrupt (CMD%u)\n",
-		mrq->cmd->opcode);
-
-	if (host->data)
-		host->data->error = -ETIMEDOUT;
-	else if (host->cmd)
-		host->cmd->error = -ETIMEDOUT;
-	else
-		mrq->cmd->error = -ETIMEDOUT;
-
-	host->cmd = NULL;
-	host->data = NULL;
-	host->mrq = NULL;
-	host->force_pio = false;
-
-	spin_unlock_irqrestore(&host->lock, flags);
 
-	reset(host);
-
-	mmc_request_done(host->mmc, mrq);
-}
-
-static void
-tmio_mmc_finish_request(struct tmio_mmc_host *host)
-{
-	struct mmc_request *mrq = host->mrq;
-
-	if (!mrq)
-		return;
-
-	host->mrq = NULL;
-	host->cmd = NULL;
-	host->data = NULL;
-	host->force_pio = false;
-
-	cancel_delayed_work(&host->delayed_reset_work);
-
-	mmc_request_done(host->mmc, mrq);
-}
-
-/* These are the bitmasks the tmio chip requires to implement the MMC response
- * types. Note that R1 and R6 are the same in this scheme. */
-#define APP_CMD        0x0040
-#define RESP_NONE      0x0300
-#define RESP_R1        0x0400
-#define RESP_R1B       0x0500
-#define RESP_R2        0x0600
-#define RESP_R3        0x0700
-#define DATA_PRESENT   0x0800
-#define TRANSFER_READ  0x1000
-#define TRANSFER_MULTI 0x2000
-#define SECURITY_CMD   0x4000
-
-static int
-tmio_mmc_start_command(struct tmio_mmc_host *host, struct mmc_command *cmd)
-{
-	struct mmc_data *data = host->data;
-	int c = cmd->opcode;
-
-	/* Command 12 is handled by hardware */
-	if (cmd->opcode == 12 && !cmd->arg) {
-		sd_ctrl_write16(host, CTL_STOP_INTERNAL_ACTION, 0x001);
-		return 0;
-	}
-
-	switch (mmc_resp_type(cmd)) {
-	case MMC_RSP_NONE: c |= RESP_NONE; break;
-	case MMC_RSP_R1:   c |= RESP_R1;   break;
-	case MMC_RSP_R1B:  c |= RESP_R1B;  break;
-	case MMC_RSP_R2:   c |= RESP_R2;   break;
-	case MMC_RSP_R3:   c |= RESP_R3;   break;
-	default:
-		pr_debug("Unknown response type %d\n", mmc_resp_type(cmd));
-		return -EINVAL;
-	}
-
-	host->cmd = cmd;
-
-/* FIXME - this seems to be ok commented out but the spec suggest this bit
- *         should be set when issuing app commands.
- *	if(cmd->flags & MMC_FLAG_ACMD)
- *		c |= APP_CMD;
- */
-	if (data) {
-		c |= DATA_PRESENT;
-		if (data->blocks > 1) {
-			sd_ctrl_write16(host, CTL_STOP_INTERNAL_ACTION, 0x100);
-			c |= TRANSFER_MULTI;
-		}
-		if (data->flags & MMC_DATA_READ)
-			c |= TRANSFER_READ;
-	}
-
-	enable_mmc_irqs(host, TMIO_MASK_CMD);
-
-	/* Fire off the command */
-	sd_ctrl_write32(host, CTL_ARG_REG, cmd->arg);
-	sd_ctrl_write16(host, CTL_SD_CMD, c);
-
-	return 0;
-}
-
-/*
- * This chip always returns (at least?) as much data as you ask for.
- * I'm unsure what happens if you ask for less than a block. This should be
- * looked into to ensure that a funny length read doesnt hose the controller.
- */
-static void tmio_mmc_pio_irq(struct tmio_mmc_host *host)
-{
-	struct mmc_data *data = host->data;
-	void *sg_virt;
-	unsigned short *buf;
-	unsigned int count;
-	unsigned long flags;
-
-	if ((host->chan_tx || host->chan_rx) && !host->force_pio) {
-		pr_err("PIO IRQ in DMA mode!\n");
-		return;
-	} else if (!data) {
-		pr_debug("Spurious PIO IRQ\n");
-		return;
-	}
-
-	sg_virt = tmio_mmc_kmap_atomic(host->sg_ptr, &flags);
-	buf = (unsigned short *)(sg_virt + host->sg_off);
-
-	count = host->sg_ptr->length - host->sg_off;
-	if (count > data->blksz)
-		count = data->blksz;
-
-	pr_debug("count: %08x offset: %08x flags %08x\n",
-		 count, host->sg_off, data->flags);
-
-	/* Transfer the data */
-	if (data->flags & MMC_DATA_READ)
-		sd_ctrl_read16_rep(host, CTL_SD_DATA_PORT, buf, count >> 1);
-	else
-		sd_ctrl_write16_rep(host, CTL_SD_DATA_PORT, buf, count >> 1);
-
-	host->sg_off += count;
-
-	tmio_mmc_kunmap_atomic(host->sg_ptr, &flags, sg_virt);
-
-	if (host->sg_off == host->sg_ptr->length)
-		tmio_mmc_next_sg(host);
-
-	return;
-}
-
-/* needs to be called with host->lock held */
-static void tmio_mmc_do_data_irq(struct tmio_mmc_host *host)
-{
-	struct mmc_data *data = host->data;
-	struct mmc_command *stop;
-
-	host->data = NULL;
-
-	if (!data) {
-		dev_warn(&host->pdev->dev, "Spurious data end IRQ\n");
-		return;
-	}
-	stop = data->stop;
-
-	/* FIXME - return correct transfer count on errors */
-	if (!data->error)
-		data->bytes_xfered = data->blocks * data->blksz;
-	else
-		data->bytes_xfered = 0;
-
-	pr_debug("Completed data request\n");
-
-	/*
-	 * FIXME: other drivers allow an optional stop command of any given type
-	 *        which we dont do, as the chip can auto generate them.
-	 *        Perhaps we can be smarter about when to use auto CMD12 and
-	 *        only issue the auto request when we know this is the desired
-	 *        stop command, allowing fallback to the stop command the
-	 *        upper layers expect. For now, we do what works.
-	 */
-
-	if (data->flags & MMC_DATA_READ) {
-		if (host->chan_rx && !host->force_pio)
-			tmio_check_bounce_buffer(host);
-		dev_dbg(&host->pdev->dev, "Complete Rx request %p\n",
-			host->mrq);
-	} else {
-		dev_dbg(&host->pdev->dev, "Complete Tx request %p\n",
-			host->mrq);
-	}
-
-	if (stop) {
-		if (stop->opcode == 12 && !stop->arg)
-			sd_ctrl_write16(host, CTL_STOP_INTERNAL_ACTION, 0x000);
-		else
-			BUG();
-	}
-
-	tmio_mmc_finish_request(host);
-}
-
-static void tmio_mmc_data_irq(struct tmio_mmc_host *host)
-{
-	struct mmc_data *data;
-	spin_lock(&host->lock);
-	data = host->data;
-
-	if (!data)
-		goto out;
-
-	if (host->chan_tx && (data->flags & MMC_DATA_WRITE) && !host->force_pio) {
-		/*
-		 * Has all data been written out yet? Testing on SuperH showed,
-		 * that in most cases the first interrupt comes already with the
-		 * BUSY status bit clear, but on some operations, like mount or
-		 * in the beginning of a write / sync / umount, there is one
-		 * DATAEND interrupt with the BUSY bit set, in this cases
-		 * waiting for one more interrupt fixes the problem.
-		 */
-		if (!(sd_ctrl_read32(host, CTL_STATUS) & TMIO_STAT_CMD_BUSY)) {
-			disable_mmc_irqs(host, TMIO_STAT_DATAEND);
-			tasklet_schedule(&host->dma_complete);
-		}
-	} else if (host->chan_rx && (data->flags & MMC_DATA_READ) && !host->force_pio) {
-		disable_mmc_irqs(host, TMIO_STAT_DATAEND);
-		tasklet_schedule(&host->dma_complete);
-	} else {
-		tmio_mmc_do_data_irq(host);
-		disable_mmc_irqs(host, TMIO_MASK_READOP | TMIO_MASK_WRITEOP);
-	}
-out:
-	spin_unlock(&host->lock);
-}
-
-static void tmio_mmc_cmd_irq(struct tmio_mmc_host *host,
-	unsigned int stat)
-{
-	struct mmc_command *cmd = host->cmd;
-	int i, addr;
-
-	spin_lock(&host->lock);
-
-	if (!host->cmd) {
-		pr_debug("Spurious CMD irq\n");
-		goto out;
-	}
-
-	host->cmd = NULL;
-
-	/* This controller is sicker than the PXA one. Not only do we need to
-	 * drop the top 8 bits of the first response word, we also need to
-	 * modify the order of the response for short response command types.
-	 */
-
-	for (i = 3, addr = CTL_RESPONSE ; i >= 0 ; i--, addr += 4)
-		cmd->resp[i] = sd_ctrl_read32(host, addr);
-
-	if (cmd->flags &  MMC_RSP_136) {
-		cmd->resp[0] = (cmd->resp[0] << 8) | (cmd->resp[1] >> 24);
-		cmd->resp[1] = (cmd->resp[1] << 8) | (cmd->resp[2] >> 24);
-		cmd->resp[2] = (cmd->resp[2] << 8) | (cmd->resp[3] >> 24);
-		cmd->resp[3] <<= 8;
-	} else if (cmd->flags & MMC_RSP_R3) {
-		cmd->resp[0] = cmd->resp[3];
-	}
-
-	if (stat & TMIO_STAT_CMDTIMEOUT)
-		cmd->error = -ETIMEDOUT;
-	else if (stat & TMIO_STAT_CRCFAIL && cmd->flags & MMC_RSP_CRC)
-		cmd->error = -EILSEQ;
-
-	/* If there is data to handle we enable data IRQs here, and
-	 * we will ultimatley finish the request in the data_end handler.
-	 * If theres no data or we encountered an error, finish now.
-	 */
-	if (host->data && !cmd->error) {
-		if (host->data->flags & MMC_DATA_READ) {
-			if (host->force_pio || !host->chan_rx)
-				enable_mmc_irqs(host, TMIO_MASK_READOP);
-			else
-				tasklet_schedule(&host->dma_issue);
-		} else {
-			if (host->force_pio || !host->chan_tx)
-				enable_mmc_irqs(host, TMIO_MASK_WRITEOP);
-			else
-				tasklet_schedule(&host->dma_issue);
-		}
-	} else {
-		tmio_mmc_finish_request(host);
-	}
-
-out:
-	spin_unlock(&host->lock);
-
-	return;
-}
-
-static irqreturn_t tmio_mmc_irq(int irq, void *devid)
-{
-	struct tmio_mmc_host *host = devid;
-	struct tmio_mmc_data *pdata = mfd_get_data(host->pdev);
-	unsigned int ireg, irq_mask, status;
-	unsigned int sdio_ireg, sdio_irq_mask, sdio_status;
-
-	pr_debug("MMC IRQ begin\n");
-
-	status = sd_ctrl_read32(host, CTL_STATUS);
-	irq_mask = sd_ctrl_read32(host, CTL_IRQ_MASK);
-	ireg = status & TMIO_MASK_IRQ & ~irq_mask;
-
-	sdio_ireg = 0;
-	if (!ireg && pdata->flags & TMIO_MMC_SDIO_IRQ) {
-		sdio_status = sd_ctrl_read16(host, CTL_SDIO_STATUS);
-		sdio_irq_mask = sd_ctrl_read16(host, CTL_SDIO_IRQ_MASK);
-		sdio_ireg = sdio_status & TMIO_SDIO_MASK_ALL & ~sdio_irq_mask;
-
-		sd_ctrl_write16(host, CTL_SDIO_STATUS, sdio_status & ~TMIO_SDIO_MASK_ALL);
-
-		if (sdio_ireg && !host->sdio_irq_enabled) {
-			pr_warning("tmio_mmc: Spurious SDIO IRQ, disabling! 0x%04x 0x%04x 0x%04x\n",
-				   sdio_status, sdio_irq_mask, sdio_ireg);
-			tmio_mmc_enable_sdio_irq(host->mmc, 0);
-			goto out;
-		}
-
-		if (host->mmc->caps & MMC_CAP_SDIO_IRQ &&
-			sdio_ireg & TMIO_SDIO_STAT_IOIRQ)
-			mmc_signal_sdio_irq(host->mmc);
-
-		if (sdio_ireg)
-			goto out;
-	}
-
-	pr_debug_status(status);
-	pr_debug_status(ireg);
-
-	if (!ireg) {
-		disable_mmc_irqs(host, status & ~irq_mask);
-
-		pr_warning("tmio_mmc: Spurious irq, disabling! "
-			"0x%08x 0x%08x 0x%08x\n", status, irq_mask, ireg);
-		pr_debug_status(status);
-
-		goto out;
-	}
-
-	while (ireg) {
-		/* Card insert / remove attempts */
-		if (ireg & (TMIO_STAT_CARD_INSERT | TMIO_STAT_CARD_REMOVE)) {
-			ack_mmc_irqs(host, TMIO_STAT_CARD_INSERT |
-				TMIO_STAT_CARD_REMOVE);
-			mmc_detect_change(host->mmc, msecs_to_jiffies(100));
-		}
-
-		/* CRC and other errors */
-/*		if (ireg & TMIO_STAT_ERR_IRQ)
- *			handled |= tmio_error_irq(host, irq, stat);
- */
-
-		/* Command completion */
-		if (ireg & (TMIO_STAT_CMDRESPEND | TMIO_STAT_CMDTIMEOUT)) {
-			ack_mmc_irqs(host,
-				     TMIO_STAT_CMDRESPEND |
-				     TMIO_STAT_CMDTIMEOUT);
-			tmio_mmc_cmd_irq(host, status);
-		}
-
-		/* Data transfer */
-		if (ireg & (TMIO_STAT_RXRDY | TMIO_STAT_TXRQ)) {
-			ack_mmc_irqs(host, TMIO_STAT_RXRDY | TMIO_STAT_TXRQ);
-			tmio_mmc_pio_irq(host);
-		}
-
-		/* Data transfer completion */
-		if (ireg & TMIO_STAT_DATAEND) {
-			ack_mmc_irqs(host, TMIO_STAT_DATAEND);
-			tmio_mmc_data_irq(host);
-		}
-
-		/* Check status - keep going until we've handled it all */
-		status = sd_ctrl_read32(host, CTL_STATUS);
-		irq_mask = sd_ctrl_read32(host, CTL_IRQ_MASK);
-		ireg = status & TMIO_MASK_IRQ & ~irq_mask;
-
-		pr_debug("Status at end of loop: %08x\n", status);
-		pr_debug_status(status);
-	}
-	pr_debug("MMC IRQ end\n");
-
-out:
-	return IRQ_HANDLED;
-}
-
-#ifdef CONFIG_TMIO_MMC_DMA
-static void tmio_check_bounce_buffer(struct tmio_mmc_host *host)
-{
-	if (host->sg_ptr == &host->bounce_sg) {
-		unsigned long flags;
-		void *sg_vaddr = tmio_mmc_kmap_atomic(host->sg_orig, &flags);
-		memcpy(sg_vaddr, host->bounce_buf, host->bounce_sg.length);
-		tmio_mmc_kunmap_atomic(host->sg_orig, &flags, sg_vaddr);
-	}
-}
-
-static void tmio_mmc_enable_dma(struct tmio_mmc_host *host, bool enable)
-{
-#if defined(CONFIG_SUPERH) || defined(CONFIG_ARCH_SHMOBILE)
-	/* Switch DMA mode on or off - SuperH specific? */
-	sd_ctrl_write16(host, 0xd8, enable ? 2 : 0);
-#endif
-}
-
-static void tmio_mmc_start_dma_rx(struct tmio_mmc_host *host)
-{
-	struct scatterlist *sg = host->sg_ptr, *sg_tmp;
-	struct dma_async_tx_descriptor *desc = NULL;
-	struct dma_chan *chan = host->chan_rx;
-	struct tmio_mmc_data *pdata = mfd_get_data(host->pdev);
-	dma_cookie_t cookie;
-	int ret, i;
-	bool aligned = true, multiple = true;
-	unsigned int align = (1 << pdata->dma->alignment_shift) - 1;
-
-	for_each_sg(sg, sg_tmp, host->sg_len, i) {
-		if (sg_tmp->offset & align)
-			aligned = false;
-		if (sg_tmp->length & align) {
-			multiple = false;
-			break;
-		}
-	}
-
-	if ((!aligned && (host->sg_len > 1 || sg->length > PAGE_CACHE_SIZE ||
-			  align >= MAX_ALIGN)) || !multiple) {
-		ret = -EINVAL;
-		goto pio;
-	}
-
-	if (sg->length < TMIO_MIN_DMA_LEN) {
-		host->force_pio = true;
-		return;
-	}
-
-	disable_mmc_irqs(host, TMIO_STAT_RXRDY);
-
-	/* The only sg element can be unaligned, use our bounce buffer then */
-	if (!aligned) {
-		sg_init_one(&host->bounce_sg, host->bounce_buf, sg->length);
-		host->sg_ptr = &host->bounce_sg;
-		sg = host->sg_ptr;
-	}
-
-	ret = dma_map_sg(chan->device->dev, sg, host->sg_len, DMA_FROM_DEVICE);
-	if (ret > 0)
-		desc = chan->device->device_prep_slave_sg(chan, sg, ret,
-			DMA_FROM_DEVICE, DMA_CTRL_ACK);
-
-	if (desc)
-		cookie = dmaengine_submit(desc);
-
-	dev_dbg(&host->pdev->dev, "%s(): mapped %d -> %d, cookie %d, rq %p\n",
-		__func__, host->sg_len, ret, cookie, host->mrq);
-
-pio:
-	if (!desc) {
-		/* DMA failed, fall back to PIO */
-		if (ret >= 0)
-			ret = -EIO;
-		host->chan_rx = NULL;
-		dma_release_channel(chan);
-		/* Free the Tx channel too */
-		chan = host->chan_tx;
-		if (chan) {
-			host->chan_tx = NULL;
-			dma_release_channel(chan);
-		}
-		dev_warn(&host->pdev->dev,
-			 "DMA failed: %d, falling back to PIO\n", ret);
-		tmio_mmc_enable_dma(host, false);
-	}
-
-	dev_dbg(&host->pdev->dev, "%s(): desc %p, cookie %d, sg[%d]\n", __func__,
-		desc, cookie, host->sg_len);
-}
-
-static void tmio_mmc_start_dma_tx(struct tmio_mmc_host *host)
-{
-	struct scatterlist *sg = host->sg_ptr, *sg_tmp;
-	struct dma_async_tx_descriptor *desc = NULL;
-	struct dma_chan *chan = host->chan_tx;
-	struct tmio_mmc_data *pdata = mfd_get_data(host->pdev);
-	dma_cookie_t cookie;
-	int ret, i;
-	bool aligned = true, multiple = true;
-	unsigned int align = (1 << pdata->dma->alignment_shift) - 1;
-
-	for_each_sg(sg, sg_tmp, host->sg_len, i) {
-		if (sg_tmp->offset & align)
-			aligned = false;
-		if (sg_tmp->length & align) {
-			multiple = false;
-			break;
-		}
-	}
-
-	if ((!aligned && (host->sg_len > 1 || sg->length > PAGE_CACHE_SIZE ||
-			  align >= MAX_ALIGN)) || !multiple) {
-		ret = -EINVAL;
-		goto pio;
-	}
-
-	if (sg->length < TMIO_MIN_DMA_LEN) {
-		host->force_pio = true;
-		return;
-	}
-
-	disable_mmc_irqs(host, TMIO_STAT_TXRQ);
-
-	/* The only sg element can be unaligned, use our bounce buffer then */
-	if (!aligned) {
-		unsigned long flags;
-		void *sg_vaddr = tmio_mmc_kmap_atomic(sg, &flags);
-		sg_init_one(&host->bounce_sg, host->bounce_buf, sg->length);
-		memcpy(host->bounce_buf, sg_vaddr, host->bounce_sg.length);
-		tmio_mmc_kunmap_atomic(sg, &flags, sg_vaddr);
-		host->sg_ptr = &host->bounce_sg;
-		sg = host->sg_ptr;
-	}
-
-	ret = dma_map_sg(chan->device->dev, sg, host->sg_len, DMA_TO_DEVICE);
-	if (ret > 0)
-		desc = chan->device->device_prep_slave_sg(chan, sg, ret,
-			DMA_TO_DEVICE, DMA_CTRL_ACK);
-
-	if (desc)
-		cookie = dmaengine_submit(desc);
-
-	dev_dbg(&host->pdev->dev, "%s(): mapped %d -> %d, cookie %d, rq %p\n",
-		__func__, host->sg_len, ret, cookie, host->mrq);
-
-pio:
-	if (!desc) {
-		/* DMA failed, fall back to PIO */
-		if (ret >= 0)
-			ret = -EIO;
-		host->chan_tx = NULL;
-		dma_release_channel(chan);
-		/* Free the Rx channel too */
-		chan = host->chan_rx;
-		if (chan) {
-			host->chan_rx = NULL;
-			dma_release_channel(chan);
-		}
-		dev_warn(&host->pdev->dev,
-			 "DMA failed: %d, falling back to PIO\n", ret);
-		tmio_mmc_enable_dma(host, false);
-	}
-
-	dev_dbg(&host->pdev->dev, "%s(): desc %p, cookie %d\n", __func__,
-		desc, cookie);
-}
-
-static void tmio_mmc_start_dma(struct tmio_mmc_host *host,
-			       struct mmc_data *data)
-{
-	if (data->flags & MMC_DATA_READ) {
-		if (host->chan_rx)
-			tmio_mmc_start_dma_rx(host);
-	} else {
-		if (host->chan_tx)
-			tmio_mmc_start_dma_tx(host);
-	}
-}
-
-static void tmio_issue_tasklet_fn(unsigned long priv)
-{
-	struct tmio_mmc_host *host = (struct tmio_mmc_host *)priv;
-	struct dma_chan *chan = NULL;
-
-	spin_lock_irq(&host->lock);
-
-	if (host && host->data) {
-		if (host->data->flags & MMC_DATA_READ)
-			chan = host->chan_rx;
-		else
-			chan = host->chan_tx;
-	}
-
-	spin_unlock_irq(&host->lock);
-
-	enable_mmc_irqs(host, TMIO_STAT_DATAEND);
-
-	if (chan)
-		dma_async_issue_pending(chan);
-}
-
-static void tmio_tasklet_fn(unsigned long arg)
-{
-	struct tmio_mmc_host *host = (struct tmio_mmc_host *)arg;
-
-	spin_lock_irq(&host->lock);
-
-	if (!host->data)
-		goto out;
-
-	if (host->data->flags & MMC_DATA_READ)
-		dma_unmap_sg(host->chan_rx->device->dev,
-			     host->sg_ptr, host->sg_len,
-			     DMA_FROM_DEVICE);
-	else
-		dma_unmap_sg(host->chan_tx->device->dev,
-			     host->sg_ptr, host->sg_len,
-			     DMA_TO_DEVICE);
-
-	tmio_mmc_do_data_irq(host);
-out:
-	spin_unlock_irq(&host->lock);
-}
-
-/* It might be necessary to make filter MFD specific */
-static bool tmio_mmc_filter(struct dma_chan *chan, void *arg)
-{
-	dev_dbg(chan->device->dev, "%s: slave data %p\n", __func__, arg);
-	chan->private = arg;
-	return true;
-}
-
-static void tmio_mmc_request_dma(struct tmio_mmc_host *host,
-				 struct tmio_mmc_data *pdata)
-{
-	/* We can only either use DMA for both Tx and Rx or not use it at all */
-	if (pdata->dma) {
-		dma_cap_mask_t mask;
-
-		dma_cap_zero(mask);
-		dma_cap_set(DMA_SLAVE, mask);
-
-		host->chan_tx = dma_request_channel(mask, tmio_mmc_filter,
-						    pdata->dma->chan_priv_tx);
-		dev_dbg(&host->pdev->dev, "%s: TX: got channel %p\n", __func__,
-			host->chan_tx);
-
-		if (!host->chan_tx)
-			return;
-
-		host->chan_rx = dma_request_channel(mask, tmio_mmc_filter,
-						    pdata->dma->chan_priv_rx);
-		dev_dbg(&host->pdev->dev, "%s: RX: got channel %p\n", __func__,
-			host->chan_rx);
-
-		if (!host->chan_rx) {
-			dma_release_channel(host->chan_tx);
-			host->chan_tx = NULL;
-			return;
-		}
-
-		tasklet_init(&host->dma_complete, tmio_tasklet_fn, (unsigned long)host);
-		tasklet_init(&host->dma_issue, tmio_issue_tasklet_fn, (unsigned long)host);
-
-		tmio_mmc_enable_dma(host, true);
-	}
-}
-
-static void tmio_mmc_release_dma(struct tmio_mmc_host *host)
-{
-	if (host->chan_tx) {
-		struct dma_chan *chan = host->chan_tx;
-		host->chan_tx = NULL;
-		dma_release_channel(chan);
-	}
-	if (host->chan_rx) {
-		struct dma_chan *chan = host->chan_rx;
-		host->chan_rx = NULL;
-		dma_release_channel(chan);
-	}
-}
-#else
-static void tmio_check_bounce_buffer(struct tmio_mmc_host *host)
-{
-}
-
-static void tmio_mmc_start_dma(struct tmio_mmc_host *host,
-			       struct mmc_data *data)
-{
-}
-
-static void tmio_mmc_request_dma(struct tmio_mmc_host *host,
-				 struct tmio_mmc_data *pdata)
-{
-	host->chan_tx = NULL;
-	host->chan_rx = NULL;
-}
-
-static void tmio_mmc_release_dma(struct tmio_mmc_host *host)
-{
-}
-#endif
-
-static int tmio_mmc_start_data(struct tmio_mmc_host *host,
-	struct mmc_data *data)
-{
-	struct tmio_mmc_data *pdata = mfd_get_data(host->pdev);
-
-	pr_debug("setup data transfer: blocksize %08x  nr_blocks %d\n",
-		 data->blksz, data->blocks);
-
-	/* Some hardware cannot perform 2 byte requests in 4 bit mode */
-	if (host->mmc->ios.bus_width == MMC_BUS_WIDTH_4) {
-		int blksz_2bytes = pdata->flags & TMIO_MMC_BLKSZ_2BYTES;
-
-		if (data->blksz < 2 || (data->blksz < 4 && !blksz_2bytes)) {
-			pr_err("%s: %d byte block unsupported in 4 bit mode\n",
-			       mmc_hostname(host->mmc), data->blksz);
-			return -EINVAL;
-		}
-	}
-
-	tmio_mmc_init_sg(host, data);
-	host->data = data;
-
-	/* Set transfer length / blocksize */
-	sd_ctrl_write16(host, CTL_SD_XFER_LEN, data->blksz);
-	sd_ctrl_write16(host, CTL_XFER_BLK_COUNT, data->blocks);
-
-	tmio_mmc_start_dma(host, data);
-
-	return 0;
-}
-
-/* Process requests from the MMC layer */
-static void tmio_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq)
-{
-	struct tmio_mmc_host *host = mmc_priv(mmc);
-	int ret;
-
-	if (host->mrq)
-		pr_debug("request not null\n");
-
-	host->last_req_ts = jiffies;
-	wmb();
-	host->mrq = mrq;
-
-	if (mrq->data) {
-		ret = tmio_mmc_start_data(host, mrq->data);
-		if (ret)
-			goto fail;
-	}
-
-	ret = tmio_mmc_start_command(host, mrq->cmd);
-	if (!ret) {
-		schedule_delayed_work(&host->delayed_reset_work,
-				      msecs_to_jiffies(2000));
-		return;
-	}
-
-fail:
-	host->mrq = NULL;
-	host->force_pio = false;
-	mrq->cmd->error = ret;
-	mmc_request_done(mmc, mrq);
-}
-
-/* Set MMC clock / power.
- * Note: This controller uses a simple divider scheme therefore it cannot
- * run a MMC card at full speed (20MHz). The max clock is 24MHz on SD, but as
- * MMC wont run that fast, it has to be clocked at 12MHz which is the next
- * slowest setting.
- */
-static void tmio_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
-{
-	struct tmio_mmc_host *host = mmc_priv(mmc);
-
-	if (ios->clock)
-		tmio_mmc_set_clock(host, ios->clock);
-
-	/* Power sequence - OFF -> ON -> UP */
-	switch (ios->power_mode) {
-	case MMC_POWER_OFF: /* power down SD bus */
-		if (host->set_pwr)
-			host->set_pwr(host->pdev, 0);
-		tmio_mmc_clk_stop(host);
-		break;
-	case MMC_POWER_ON: /* power up SD bus */
-		if (host->set_pwr)
-			host->set_pwr(host->pdev, 1);
-		break;
-	case MMC_POWER_UP: /* start bus clock */
-		tmio_mmc_clk_start(host);
-		break;
-	}
-
-	switch (ios->bus_width) {
-	case MMC_BUS_WIDTH_1:
-		sd_ctrl_write16(host, CTL_SD_MEM_CARD_OPT, 0x80e0);
-	break;
-	case MMC_BUS_WIDTH_4:
-		sd_ctrl_write16(host, CTL_SD_MEM_CARD_OPT, 0x00e0);
-	break;
-	}
-
-	/* Let things settle. delay taken from winCE driver */
-	udelay(140);
-}
-
-static int tmio_mmc_get_ro(struct mmc_host *mmc)
-{
-	struct tmio_mmc_host *host = mmc_priv(mmc);
-	struct tmio_mmc_data *pdata = mfd_get_data(host->pdev);
-
-	return ((pdata->flags & TMIO_MMC_WRPROTECT_DISABLE) ||
-		(sd_ctrl_read32(host, CTL_STATUS) & TMIO_STAT_WRPROTECT)) ? 0 : 1;
-}
-
-static int tmio_mmc_get_cd(struct mmc_host *mmc)
-{
-	struct tmio_mmc_host *host = mmc_priv(mmc);
-	struct tmio_mmc_data *pdata = mfd_get_data(host->pdev);
-
-	if (!pdata->get_cd)
-		return -ENOSYS;
-	else
-		return pdata->get_cd(host->pdev);
-}
-
-static const struct mmc_host_ops tmio_mmc_ops = {
-	.request	= tmio_mmc_request,
-	.set_ios	= tmio_mmc_set_ios,
-	.get_ro         = tmio_mmc_get_ro,
-	.get_cd		= tmio_mmc_get_cd,
-	.enable_sdio_irq = tmio_mmc_enable_sdio_irq,
-};
+#include "tmio_mmc.h"
 
 #ifdef CONFIG_PM
 static int tmio_mmc_suspend(struct platform_device *dev, pm_message_t state)
@@ -1245,138 +62,54 @@ out:
 #define tmio_mmc_resume NULL
 #endif
 
-static int __devinit tmio_mmc_probe(struct platform_device *dev)
+static int __devinit tmio_mmc_probe(struct platform_device *pdev)
 {
-	const struct mfd_cell *cell = mfd_get_cell(dev);
+	const struct mfd_cell *cell = mfd_get_cell(pdev);
 	struct tmio_mmc_data *pdata;
-	struct resource *res_ctl;
 	struct tmio_mmc_host *host;
-	struct mmc_host *mmc;
 	int ret = -EINVAL;
-	u32 irq_mask = TMIO_MASK_CMD;
 
-	if (dev->num_resources != 2)
+	if (pdev->num_resources != 2)
 		goto out;
 
-	res_ctl = platform_get_resource(dev, IORESOURCE_MEM, 0);
-	if (!res_ctl)
-		goto out;
-
-	pdata = mfd_get_data(dev);
+	pdata = mfd_get_data(pdev);
 	if (!pdata || !pdata->hclk)
 		goto out;
 
-	ret = -ENOMEM;
-
-	mmc = mmc_alloc_host(sizeof(struct tmio_mmc_host), &dev->dev);
-	if (!mmc)
-		goto out;
-
-	host = mmc_priv(mmc);
-	host->mmc = mmc;
-	host->pdev = dev;
-	platform_set_drvdata(dev, mmc);
-
-	host->set_pwr = pdata->set_pwr;
-	host->set_clk_div = pdata->set_clk_div;
-
-	/* SD control register space size is 0x200, 0x400 for bus_shift=1 */
-	host->bus_shift = resource_size(res_ctl) >> 10;
-
-	host->ctl = ioremap(res_ctl->start, resource_size(res_ctl));
-	if (!host->ctl)
-		goto host_free;
-
-	mmc->ops = &tmio_mmc_ops;
-	mmc->caps = MMC_CAP_4_BIT_DATA | pdata->capabilities;
-	mmc->f_max = pdata->hclk;
-	mmc->f_min = mmc->f_max / 512;
-	mmc->max_segs = 32;
-	mmc->max_blk_size = 512;
-	mmc->max_blk_count = (PAGE_CACHE_SIZE / mmc->max_blk_size) *
-		mmc->max_segs;
-	mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count;
-	mmc->max_seg_size = mmc->max_req_size;
-	if (pdata->ocr_mask)
-		mmc->ocr_avail = pdata->ocr_mask;
-	else
-		mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
-
 	/* Tell the MFD core we are ready to be enabled */
 	if (cell->enable) {
-		ret = cell->enable(dev);
+		ret = cell->enable(pdev);
 		if (ret)
-			goto unmap_ctl;
+			goto out;
 	}
 
-	tmio_mmc_clk_stop(host);
-	reset(host);
-
-	ret = platform_get_irq(dev, 0);
-	if (ret >= 0)
-		host->irq = ret;
-	else
-		goto cell_disable;
-
-	disable_mmc_irqs(host, TMIO_MASK_ALL);
-	if (pdata->flags & TMIO_MMC_SDIO_IRQ)
-		tmio_mmc_enable_sdio_irq(mmc, 0);
-
-	ret = request_irq(host->irq, tmio_mmc_irq, IRQF_DISABLED |
-		IRQF_TRIGGER_FALLING, dev_name(&dev->dev), host);
+	ret = tmio_mmc_host_probe(&host, pdev, pdata);
 	if (ret)
 		goto cell_disable;
 
-	spin_lock_init(&host->lock);
-
-	/* Init delayed work for request timeouts */
-	INIT_DELAYED_WORK(&host->delayed_reset_work, tmio_mmc_reset_work);
-
-	/* See if we also get DMA */
-	tmio_mmc_request_dma(host, pdata);
-
-	mmc_add_host(mmc);
-
 	pr_info("%s at 0x%08lx irq %d\n", mmc_hostname(host->mmc),
 		(unsigned long)host->ctl, host->irq);
 
-	/* Unmask the IRQs we want to know about */
-	if (!host->chan_rx)
-		irq_mask |= TMIO_MASK_READOP;
-	if (!host->chan_tx)
-		irq_mask |= TMIO_MASK_WRITEOP;
-	enable_mmc_irqs(host, irq_mask);
-
 	return 0;
 
 cell_disable:
 	if (cell->disable)
-		cell->disable(dev);
-unmap_ctl:
-	iounmap(host->ctl);
-host_free:
-	mmc_free_host(mmc);
+		cell->disable(pdev);
 out:
 	return ret;
 }
 
-static int __devexit tmio_mmc_remove(struct platform_device *dev)
+static int __devexit tmio_mmc_remove(struct platform_device *pdev)
 {
-	const struct mfd_cell *cell = mfd_get_cell(dev);
-	struct mmc_host *mmc = platform_get_drvdata(dev);
+	const struct mfd_cell *cell = mfd_get_cell(pdev);
+	struct mmc_host *mmc = platform_get_drvdata(pdev);
 
-	platform_set_drvdata(dev, NULL);
+	platform_set_drvdata(pdev, NULL);
 
 	if (mmc) {
-		struct tmio_mmc_host *host = mmc_priv(mmc);
-		mmc_remove_host(mmc);
-		cancel_delayed_work_sync(&host->delayed_reset_work);
-		tmio_mmc_release_dma(host);
-		free_irq(host->irq, host);
+		tmio_mmc_host_remove(mmc_priv(mmc));
 		if (cell->disable)
-			cell->disable(dev);
-		iounmap(host->ctl);
-		mmc_free_host(mmc);
+			cell->disable(pdev);
 	}
 
 	return 0;