diff options
author | Ingo Molnar <mingo@elte.hu> | 2011-03-30 09:07:39 +0200 |
---|---|---|
committer | Ingo Molnar <mingo@elte.hu> | 2011-03-30 09:07:43 +0200 |
commit | 9f644c4ba86b76159d36747fda7da496f72a1872 (patch) | |
tree | 31e025a5f283aff691fb636bf07fd0b445cf07a3 /drivers/mmc/host/tmio_mmc_pio.c | |
parent | 1b7155f7de119870f0d3fad89f125de2ff6c16be (diff) | |
parent | 0ce790e7d736cedc563e1fb4e998babf5a4dbc3d (diff) |
Merge commit 'v2.6.39-rc1' into perf/urgent
Merge reason: use the post-merge-window tree.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Diffstat (limited to 'drivers/mmc/host/tmio_mmc_pio.c')
-rw-r--r-- | drivers/mmc/host/tmio_mmc_pio.c | 897 |
1 files changed, 897 insertions, 0 deletions
diff --git a/drivers/mmc/host/tmio_mmc_pio.c b/drivers/mmc/host/tmio_mmc_pio.c new file mode 100644 index 00000000000..6ae8d2f00ec --- /dev/null +++ b/drivers/mmc/host/tmio_mmc_pio.c @@ -0,0 +1,897 @@ +/* + * linux/drivers/mmc/host/tmio_mmc_pio.c + * + * Copyright (C) 2011 Guennadi Liakhovetski + * Copyright (C) 2007 Ian Molton + * Copyright (C) 2004 Ian Molton + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Driver for the MMC / SD / SDIO IP found in: + * + * TC6393XB, TC6391XB, TC6387XB, T7L66XB, ASIC3, SH-Mobile SoCs + * + * This driver draws mainly on scattered spec sheets, Reverse engineering + * of the toshiba e800 SD driver and some parts of the 2.4 ASIC3 driver (4 bit + * support). (Further 4 bit support from a later datasheet). + * + * TODO: + * Investigate using a workqueue for PIO transfers + * Eliminate FIXMEs + * SDIO support + * Better Power management + * Handle MMC errors better + * double buffer support + * + */ + +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/highmem.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/irq.h> +#include <linux/mfd/tmio.h> +#include <linux/mmc/host.h> +#include <linux/mmc/tmio.h> +#include <linux/module.h> +#include <linux/pagemap.h> +#include <linux/platform_device.h> +#include <linux/scatterlist.h> +#include <linux/workqueue.h> +#include <linux/spinlock.h> + +#include "tmio_mmc.h" + +static u16 sd_ctrl_read16(struct tmio_mmc_host *host, int addr) +{ + return readw(host->ctl + (addr << host->bus_shift)); +} + +static void sd_ctrl_read16_rep(struct tmio_mmc_host *host, int addr, + u16 *buf, int count) +{ + readsw(host->ctl + (addr << host->bus_shift), buf, count); +} + +static u32 sd_ctrl_read32(struct tmio_mmc_host *host, int addr) +{ + return readw(host->ctl + (addr << host->bus_shift)) | + readw(host->ctl + ((addr + 2) << host->bus_shift)) << 16; +} + +static void sd_ctrl_write16(struct tmio_mmc_host *host, int addr, u16 val) +{ + writew(val, host->ctl + (addr << host->bus_shift)); +} + +static void sd_ctrl_write16_rep(struct tmio_mmc_host *host, int addr, + u16 *buf, int count) +{ + writesw(host->ctl + (addr << host->bus_shift), buf, count); +} + +static void sd_ctrl_write32(struct tmio_mmc_host *host, int addr, u32 val) +{ + writew(val, host->ctl + (addr << host->bus_shift)); + writew(val >> 16, host->ctl + ((addr + 2) << host->bus_shift)); +} + +void tmio_mmc_enable_mmc_irqs(struct tmio_mmc_host *host, u32 i) +{ + u32 mask = sd_ctrl_read32(host, CTL_IRQ_MASK) & ~(i & TMIO_MASK_IRQ); + sd_ctrl_write32(host, CTL_IRQ_MASK, mask); +} + +void tmio_mmc_disable_mmc_irqs(struct tmio_mmc_host *host, u32 i) +{ + u32 mask = sd_ctrl_read32(host, CTL_IRQ_MASK) | (i & TMIO_MASK_IRQ); + sd_ctrl_write32(host, CTL_IRQ_MASK, mask); +} + +static void tmio_mmc_ack_mmc_irqs(struct tmio_mmc_host *host, u32 i) +{ + sd_ctrl_write32(host, CTL_STATUS, ~i); +} + +static void tmio_mmc_init_sg(struct tmio_mmc_host *host, struct mmc_data *data) +{ + host->sg_len = data->sg_len; + host->sg_ptr = data->sg; + host->sg_orig = data->sg; + host->sg_off = 0; +} + +static int tmio_mmc_next_sg(struct tmio_mmc_host *host) +{ + host->sg_ptr = sg_next(host->sg_ptr); + host->sg_off = 0; + return --host->sg_len; +} + +#ifdef CONFIG_MMC_DEBUG + +#define STATUS_TO_TEXT(a, status, i) \ + do { \ + if (status & TMIO_STAT_##a) { \ + if (i++) \ + printk(" | "); \ + printk(#a); \ + } \ + } while (0) + +static void pr_debug_status(u32 status) +{ + int i = 0; + printk(KERN_DEBUG "status: %08x = ", status); + STATUS_TO_TEXT(CARD_REMOVE, status, i); + STATUS_TO_TEXT(CARD_INSERT, status, i); + STATUS_TO_TEXT(SIGSTATE, status, i); + STATUS_TO_TEXT(WRPROTECT, status, i); + STATUS_TO_TEXT(CARD_REMOVE_A, status, i); + STATUS_TO_TEXT(CARD_INSERT_A, status, i); + STATUS_TO_TEXT(SIGSTATE_A, status, i); + STATUS_TO_TEXT(CMD_IDX_ERR, status, i); + STATUS_TO_TEXT(STOPBIT_ERR, status, i); + STATUS_TO_TEXT(ILL_FUNC, status, i); + STATUS_TO_TEXT(CMD_BUSY, status, i); + STATUS_TO_TEXT(CMDRESPEND, status, i); + STATUS_TO_TEXT(DATAEND, status, i); + STATUS_TO_TEXT(CRCFAIL, status, i); + STATUS_TO_TEXT(DATATIMEOUT, status, i); + STATUS_TO_TEXT(CMDTIMEOUT, status, i); + STATUS_TO_TEXT(RXOVERFLOW, status, i); + STATUS_TO_TEXT(TXUNDERRUN, status, i); + STATUS_TO_TEXT(RXRDY, status, i); + STATUS_TO_TEXT(TXRQ, status, i); + STATUS_TO_TEXT(ILL_ACCESS, status, i); + printk("\n"); +} + +#else +#define pr_debug_status(s) do { } while (0) +#endif + +static void tmio_mmc_enable_sdio_irq(struct mmc_host *mmc, int enable) +{ + struct tmio_mmc_host *host = mmc_priv(mmc); + + if (enable) { + host->sdio_irq_enabled = 1; + sd_ctrl_write16(host, CTL_TRANSACTION_CTL, 0x0001); + sd_ctrl_write16(host, CTL_SDIO_IRQ_MASK, + (TMIO_SDIO_MASK_ALL & ~TMIO_SDIO_STAT_IOIRQ)); + } else { + sd_ctrl_write16(host, CTL_SDIO_IRQ_MASK, TMIO_SDIO_MASK_ALL); + sd_ctrl_write16(host, CTL_TRANSACTION_CTL, 0x0000); + host->sdio_irq_enabled = 0; + } +} + +static void tmio_mmc_set_clock(struct tmio_mmc_host *host, int new_clock) +{ + u32 clk = 0, clock; + + if (new_clock) { + for (clock = host->mmc->f_min, clk = 0x80000080; + new_clock >= (clock<<1); clk >>= 1) + clock <<= 1; + clk |= 0x100; + } + + if (host->set_clk_div) + host->set_clk_div(host->pdev, (clk>>22) & 1); + + sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, clk & 0x1ff); +} + +static void tmio_mmc_clk_stop(struct tmio_mmc_host *host) +{ + struct resource *res = platform_get_resource(host->pdev, IORESOURCE_MEM, 0); + + /* implicit BUG_ON(!res) */ + if (resource_size(res) > 0x100) { + sd_ctrl_write16(host, CTL_CLK_AND_WAIT_CTL, 0x0000); + msleep(10); + } + + sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, ~0x0100 & + sd_ctrl_read16(host, CTL_SD_CARD_CLK_CTL)); + msleep(10); +} + +static void tmio_mmc_clk_start(struct tmio_mmc_host *host) +{ + struct resource *res = platform_get_resource(host->pdev, IORESOURCE_MEM, 0); + + sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, 0x0100 | + sd_ctrl_read16(host, CTL_SD_CARD_CLK_CTL)); + msleep(10); + + /* implicit BUG_ON(!res) */ + if (resource_size(res) > 0x100) { + sd_ctrl_write16(host, CTL_CLK_AND_WAIT_CTL, 0x0100); + msleep(10); + } +} + +static void tmio_mmc_reset(struct tmio_mmc_host *host) +{ + struct resource *res = platform_get_resource(host->pdev, IORESOURCE_MEM, 0); + + /* FIXME - should we set stop clock reg here */ + sd_ctrl_write16(host, CTL_RESET_SD, 0x0000); + /* implicit BUG_ON(!res) */ + if (resource_size(res) > 0x100) + sd_ctrl_write16(host, CTL_RESET_SDIO, 0x0000); + msleep(10); + sd_ctrl_write16(host, CTL_RESET_SD, 0x0001); + if (resource_size(res) > 0x100) + sd_ctrl_write16(host, CTL_RESET_SDIO, 0x0001); + msleep(10); +} + +static void tmio_mmc_reset_work(struct work_struct *work) +{ + struct tmio_mmc_host *host = container_of(work, struct tmio_mmc_host, + delayed_reset_work.work); + struct mmc_request *mrq; + unsigned long flags; + + spin_lock_irqsave(&host->lock, flags); + mrq = host->mrq; + + /* request already finished */ + if (!mrq + || time_is_after_jiffies(host->last_req_ts + + msecs_to_jiffies(2000))) { + spin_unlock_irqrestore(&host->lock, flags); + return; + } + + dev_warn(&host->pdev->dev, + "timeout waiting for hardware interrupt (CMD%u)\n", + mrq->cmd->opcode); + + if (host->data) + host->data->error = -ETIMEDOUT; + else if (host->cmd) + host->cmd->error = -ETIMEDOUT; + else + mrq->cmd->error = -ETIMEDOUT; + + host->cmd = NULL; + host->data = NULL; + host->mrq = NULL; + host->force_pio = false; + + spin_unlock_irqrestore(&host->lock, flags); + + tmio_mmc_reset(host); + + mmc_request_done(host->mmc, mrq); +} + +static void tmio_mmc_finish_request(struct tmio_mmc_host *host) +{ + struct mmc_request *mrq = host->mrq; + + if (!mrq) + return; + + host->mrq = NULL; + host->cmd = NULL; + host->data = NULL; + host->force_pio = false; + + cancel_delayed_work(&host->delayed_reset_work); + + mmc_request_done(host->mmc, mrq); +} + +/* These are the bitmasks the tmio chip requires to implement the MMC response + * types. Note that R1 and R6 are the same in this scheme. */ +#define APP_CMD 0x0040 +#define RESP_NONE 0x0300 +#define RESP_R1 0x0400 +#define RESP_R1B 0x0500 +#define RESP_R2 0x0600 +#define RESP_R3 0x0700 +#define DATA_PRESENT 0x0800 +#define TRANSFER_READ 0x1000 +#define TRANSFER_MULTI 0x2000 +#define SECURITY_CMD 0x4000 + +static int tmio_mmc_start_command(struct tmio_mmc_host *host, struct mmc_command *cmd) +{ + struct mmc_data *data = host->data; + int c = cmd->opcode; + + /* Command 12 is handled by hardware */ + if (cmd->opcode == 12 && !cmd->arg) { + sd_ctrl_write16(host, CTL_STOP_INTERNAL_ACTION, 0x001); + return 0; + } + + switch (mmc_resp_type(cmd)) { + case MMC_RSP_NONE: c |= RESP_NONE; break; + case MMC_RSP_R1: c |= RESP_R1; break; + case MMC_RSP_R1B: c |= RESP_R1B; break; + case MMC_RSP_R2: c |= RESP_R2; break; + case MMC_RSP_R3: c |= RESP_R3; break; + default: + pr_debug("Unknown response type %d\n", mmc_resp_type(cmd)); + return -EINVAL; + } + + host->cmd = cmd; + +/* FIXME - this seems to be ok commented out but the spec suggest this bit + * should be set when issuing app commands. + * if(cmd->flags & MMC_FLAG_ACMD) + * c |= APP_CMD; + */ + if (data) { + c |= DATA_PRESENT; + if (data->blocks > 1) { + sd_ctrl_write16(host, CTL_STOP_INTERNAL_ACTION, 0x100); + c |= TRANSFER_MULTI; + } + if (data->flags & MMC_DATA_READ) + c |= TRANSFER_READ; + } + + tmio_mmc_enable_mmc_irqs(host, TMIO_MASK_CMD); + + /* Fire off the command */ + sd_ctrl_write32(host, CTL_ARG_REG, cmd->arg); + sd_ctrl_write16(host, CTL_SD_CMD, c); + + return 0; +} + +/* + * This chip always returns (at least?) as much data as you ask for. + * I'm unsure what happens if you ask for less than a block. This should be + * looked into to ensure that a funny length read doesnt hose the controller. + */ +static void tmio_mmc_pio_irq(struct tmio_mmc_host *host) +{ + struct mmc_data *data = host->data; + void *sg_virt; + unsigned short *buf; + unsigned int count; + unsigned long flags; + + if ((host->chan_tx || host->chan_rx) && !host->force_pio) { + pr_err("PIO IRQ in DMA mode!\n"); + return; + } else if (!data) { + pr_debug("Spurious PIO IRQ\n"); + return; + } + + sg_virt = tmio_mmc_kmap_atomic(host->sg_ptr, &flags); + buf = (unsigned short *)(sg_virt + host->sg_off); + + count = host->sg_ptr->length - host->sg_off; + if (count > data->blksz) + count = data->blksz; + + pr_debug("count: %08x offset: %08x flags %08x\n", + count, host->sg_off, data->flags); + + /* Transfer the data */ + if (data->flags & MMC_DATA_READ) + sd_ctrl_read16_rep(host, CTL_SD_DATA_PORT, buf, count >> 1); + else + sd_ctrl_write16_rep(host, CTL_SD_DATA_PORT, buf, count >> 1); + + host->sg_off += count; + + tmio_mmc_kunmap_atomic(host->sg_ptr, &flags, sg_virt); + + if (host->sg_off == host->sg_ptr->length) + tmio_mmc_next_sg(host); + + return; +} + +static void tmio_mmc_check_bounce_buffer(struct tmio_mmc_host *host) +{ + if (host->sg_ptr == &host->bounce_sg) { + unsigned long flags; + void *sg_vaddr = tmio_mmc_kmap_atomic(host->sg_orig, &flags); + memcpy(sg_vaddr, host->bounce_buf, host->bounce_sg.length); + tmio_mmc_kunmap_atomic(host->sg_orig, &flags, sg_vaddr); + } +} + +/* needs to be called with host->lock held */ +void tmio_mmc_do_data_irq(struct tmio_mmc_host *host) +{ + struct mmc_data *data = host->data; + struct mmc_command *stop; + + host->data = NULL; + + if (!data) { + dev_warn(&host->pdev->dev, "Spurious data end IRQ\n"); + return; + } + stop = data->stop; + + /* FIXME - return correct transfer count on errors */ + if (!data->error) + data->bytes_xfered = data->blocks * data->blksz; + else + data->bytes_xfered = 0; + + pr_debug("Completed data request\n"); + + /* + * FIXME: other drivers allow an optional stop command of any given type + * which we dont do, as the chip can auto generate them. + * Perhaps we can be smarter about when to use auto CMD12 and + * only issue the auto request when we know this is the desired + * stop command, allowing fallback to the stop command the + * upper layers expect. For now, we do what works. + */ + + if (data->flags & MMC_DATA_READ) { + if (host->chan_rx && !host->force_pio) + tmio_mmc_check_bounce_buffer(host); + dev_dbg(&host->pdev->dev, "Complete Rx request %p\n", + host->mrq); + } else { + dev_dbg(&host->pdev->dev, "Complete Tx request %p\n", + host->mrq); + } + + if (stop) { + if (stop->opcode == 12 && !stop->arg) + sd_ctrl_write16(host, CTL_STOP_INTERNAL_ACTION, 0x000); + else + BUG(); + } + + tmio_mmc_finish_request(host); +} + +static void tmio_mmc_data_irq(struct tmio_mmc_host *host) +{ + struct mmc_data *data; + spin_lock(&host->lock); + data = host->data; + + if (!data) + goto out; + + if (host->chan_tx && (data->flags & MMC_DATA_WRITE) && !host->force_pio) { + /* + * Has all data been written out yet? Testing on SuperH showed, + * that in most cases the first interrupt comes already with the + * BUSY status bit clear, but on some operations, like mount or + * in the beginning of a write / sync / umount, there is one + * DATAEND interrupt with the BUSY bit set, in this cases + * waiting for one more interrupt fixes the problem. + */ + if (!(sd_ctrl_read32(host, CTL_STATUS) & TMIO_STAT_CMD_BUSY)) { + tmio_mmc_disable_mmc_irqs(host, TMIO_STAT_DATAEND); + tasklet_schedule(&host->dma_complete); + } + } else if (host->chan_rx && (data->flags & MMC_DATA_READ) && !host->force_pio) { + tmio_mmc_disable_mmc_irqs(host, TMIO_STAT_DATAEND); + tasklet_schedule(&host->dma_complete); + } else { + tmio_mmc_do_data_irq(host); + tmio_mmc_disable_mmc_irqs(host, TMIO_MASK_READOP | TMIO_MASK_WRITEOP); + } +out: + spin_unlock(&host->lock); +} + +static void tmio_mmc_cmd_irq(struct tmio_mmc_host *host, + unsigned int stat) +{ + struct mmc_command *cmd = host->cmd; + int i, addr; + + spin_lock(&host->lock); + + if (!host->cmd) { + pr_debug("Spurious CMD irq\n"); + goto out; + } + + host->cmd = NULL; + + /* This controller is sicker than the PXA one. Not only do we need to + * drop the top 8 bits of the first response word, we also need to + * modify the order of the response for short response command types. + */ + + for (i = 3, addr = CTL_RESPONSE ; i >= 0 ; i--, addr += 4) + cmd->resp[i] = sd_ctrl_read32(host, addr); + + if (cmd->flags & MMC_RSP_136) { + cmd->resp[0] = (cmd->resp[0] << 8) | (cmd->resp[1] >> 24); + cmd->resp[1] = (cmd->resp[1] << 8) | (cmd->resp[2] >> 24); + cmd->resp[2] = (cmd->resp[2] << 8) | (cmd->resp[3] >> 24); + cmd->resp[3] <<= 8; + } else if (cmd->flags & MMC_RSP_R3) { + cmd->resp[0] = cmd->resp[3]; + } + + if (stat & TMIO_STAT_CMDTIMEOUT) + cmd->error = -ETIMEDOUT; + else if (stat & TMIO_STAT_CRCFAIL && cmd->flags & MMC_RSP_CRC) + cmd->error = -EILSEQ; + + /* If there is data to handle we enable data IRQs here, and + * we will ultimatley finish the request in the data_end handler. + * If theres no data or we encountered an error, finish now. + */ + if (host->data && !cmd->error) { + if (host->data->flags & MMC_DATA_READ) { + if (host->force_pio || !host->chan_rx) + tmio_mmc_enable_mmc_irqs(host, TMIO_MASK_READOP); + else + tasklet_schedule(&host->dma_issue); + } else { + if (host->force_pio || !host->chan_tx) + tmio_mmc_enable_mmc_irqs(host, TMIO_MASK_WRITEOP); + else + tasklet_schedule(&host->dma_issue); + } + } else { + tmio_mmc_finish_request(host); + } + +out: + spin_unlock(&host->lock); +} + +static irqreturn_t tmio_mmc_irq(int irq, void *devid) +{ + struct tmio_mmc_host *host = devid; + struct tmio_mmc_data *pdata = host->pdata; + unsigned int ireg, irq_mask, status; + unsigned int sdio_ireg, sdio_irq_mask, sdio_status; + + pr_debug("MMC IRQ begin\n"); + + status = sd_ctrl_read32(host, CTL_STATUS); + irq_mask = sd_ctrl_read32(host, CTL_IRQ_MASK); + ireg = status & TMIO_MASK_IRQ & ~irq_mask; + + sdio_ireg = 0; + if (!ireg && pdata->flags & TMIO_MMC_SDIO_IRQ) { + sdio_status = sd_ctrl_read16(host, CTL_SDIO_STATUS); + sdio_irq_mask = sd_ctrl_read16(host, CTL_SDIO_IRQ_MASK); + sdio_ireg = sdio_status & TMIO_SDIO_MASK_ALL & ~sdio_irq_mask; + + sd_ctrl_write16(host, CTL_SDIO_STATUS, sdio_status & ~TMIO_SDIO_MASK_ALL); + + if (sdio_ireg && !host->sdio_irq_enabled) { + pr_warning("tmio_mmc: Spurious SDIO IRQ, disabling! 0x%04x 0x%04x 0x%04x\n", + sdio_status, sdio_irq_mask, sdio_ireg); + tmio_mmc_enable_sdio_irq(host->mmc, 0); + goto out; + } + + if (host->mmc->caps & MMC_CAP_SDIO_IRQ && + sdio_ireg & TMIO_SDIO_STAT_IOIRQ) + mmc_signal_sdio_irq(host->mmc); + + if (sdio_ireg) + goto out; + } + + pr_debug_status(status); + pr_debug_status(ireg); + + if (!ireg) { + tmio_mmc_disable_mmc_irqs(host, status & ~irq_mask); + + pr_warning("tmio_mmc: Spurious irq, disabling! " + "0x%08x 0x%08x 0x%08x\n", status, irq_mask, ireg); + pr_debug_status(status); + + goto out; + } + + while (ireg) { + /* Card insert / remove attempts */ + if (ireg & (TMIO_STAT_CARD_INSERT | TMIO_STAT_CARD_REMOVE)) { + tmio_mmc_ack_mmc_irqs(host, TMIO_STAT_CARD_INSERT | + TMIO_STAT_CARD_REMOVE); + mmc_detect_change(host->mmc, msecs_to_jiffies(100)); + } + + /* CRC and other errors */ +/* if (ireg & TMIO_STAT_ERR_IRQ) + * handled |= tmio_error_irq(host, irq, stat); + */ + + /* Command completion */ + if (ireg & (TMIO_STAT_CMDRESPEND | TMIO_STAT_CMDTIMEOUT)) { + tmio_mmc_ack_mmc_irqs(host, + TMIO_STAT_CMDRESPEND | + TMIO_STAT_CMDTIMEOUT); + tmio_mmc_cmd_irq(host, status); + } + + /* Data transfer */ + if (ireg & (TMIO_STAT_RXRDY | TMIO_STAT_TXRQ)) { + tmio_mmc_ack_mmc_irqs(host, TMIO_STAT_RXRDY | TMIO_STAT_TXRQ); + tmio_mmc_pio_irq(host); + } + + /* Data transfer completion */ + if (ireg & TMIO_STAT_DATAEND) { + tmio_mmc_ack_mmc_irqs(host, TMIO_STAT_DATAEND); + tmio_mmc_data_irq(host); + } + + /* Check status - keep going until we've handled it all */ + status = sd_ctrl_read32(host, CTL_STATUS); + irq_mask = sd_ctrl_read32(host, CTL_IRQ_MASK); + ireg = status & TMIO_MASK_IRQ & ~irq_mask; + + pr_debug("Status at end of loop: %08x\n", status); + pr_debug_status(status); + } + pr_debug("MMC IRQ end\n"); + +out: + return IRQ_HANDLED; +} + +static int tmio_mmc_start_data(struct tmio_mmc_host *host, + struct mmc_data *data) +{ + struct tmio_mmc_data *pdata = host->pdata; + + pr_debug("setup data transfer: blocksize %08x nr_blocks %d\n", + data->blksz, data->blocks); + + /* Some hardware cannot perform 2 byte requests in 4 bit mode */ + if (host->mmc->ios.bus_width == MMC_BUS_WIDTH_4) { + int blksz_2bytes = pdata->flags & TMIO_MMC_BLKSZ_2BYTES; + + if (data->blksz < 2 || (data->blksz < 4 && !blksz_2bytes)) { + pr_err("%s: %d byte block unsupported in 4 bit mode\n", + mmc_hostname(host->mmc), data->blksz); + return -EINVAL; + } + } + + tmio_mmc_init_sg(host, data); + host->data = data; + + /* Set transfer length / blocksize */ + sd_ctrl_write16(host, CTL_SD_XFER_LEN, data->blksz); + sd_ctrl_write16(host, CTL_XFER_BLK_COUNT, data->blocks); + + tmio_mmc_start_dma(host, data); + + return 0; +} + +/* Process requests from the MMC layer */ +static void tmio_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq) +{ + struct tmio_mmc_host *host = mmc_priv(mmc); + int ret; + + if (host->mrq) + pr_debug("request not null\n"); + + host->last_req_ts = jiffies; + wmb(); + host->mrq = mrq; + + if (mrq->data) { + ret = tmio_mmc_start_data(host, mrq->data); + if (ret) + goto fail; + } + + ret = tmio_mmc_start_command(host, mrq->cmd); + if (!ret) { + schedule_delayed_work(&host->delayed_reset_work, + msecs_to_jiffies(2000)); + return; + } + +fail: + host->mrq = NULL; + host->force_pio = false; + mrq->cmd->error = ret; + mmc_request_done(mmc, mrq); +} + +/* Set MMC clock / power. + * Note: This controller uses a simple divider scheme therefore it cannot + * run a MMC card at full speed (20MHz). The max clock is 24MHz on SD, but as + * MMC wont run that fast, it has to be clocked at 12MHz which is the next + * slowest setting. + */ +static void tmio_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) +{ + struct tmio_mmc_host *host = mmc_priv(mmc); + + if (ios->clock) + tmio_mmc_set_clock(host, ios->clock); + + /* Power sequence - OFF -> UP -> ON */ + if (ios->power_mode == MMC_POWER_OFF || !ios->clock) { + /* power down SD bus */ + if (ios->power_mode == MMC_POWER_OFF && host->set_pwr) + host->set_pwr(host->pdev, 0); + tmio_mmc_clk_stop(host); + } else if (ios->power_mode == MMC_POWER_UP) { + /* power up SD bus */ + if (host->set_pwr) + host->set_pwr(host->pdev, 1); + } else { + /* start bus clock */ + tmio_mmc_clk_start(host); + } + + switch (ios->bus_width) { + case MMC_BUS_WIDTH_1: + sd_ctrl_write16(host, CTL_SD_MEM_CARD_OPT, 0x80e0); + break; + case MMC_BUS_WIDTH_4: + sd_ctrl_write16(host, CTL_SD_MEM_CARD_OPT, 0x00e0); + break; + } + + /* Let things settle. delay taken from winCE driver */ + udelay(140); +} + +static int tmio_mmc_get_ro(struct mmc_host *mmc) +{ + struct tmio_mmc_host *host = mmc_priv(mmc); + struct tmio_mmc_data *pdata = host->pdata; + + return ((pdata->flags & TMIO_MMC_WRPROTECT_DISABLE) || + !(sd_ctrl_read32(host, CTL_STATUS) & TMIO_STAT_WRPROTECT)); +} + +static int tmio_mmc_get_cd(struct mmc_host *mmc) +{ + struct tmio_mmc_host *host = mmc_priv(mmc); + struct tmio_mmc_data *pdata = host->pdata; + + if (!pdata->get_cd) + return -ENOSYS; + else + return pdata->get_cd(host->pdev); +} + +static const struct mmc_host_ops tmio_mmc_ops = { + .request = tmio_mmc_request, + .set_ios = tmio_mmc_set_ios, + .get_ro = tmio_mmc_get_ro, + .get_cd = tmio_mmc_get_cd, + .enable_sdio_irq = tmio_mmc_enable_sdio_irq, +}; + +int __devinit tmio_mmc_host_probe(struct tmio_mmc_host **host, + struct platform_device *pdev, + struct tmio_mmc_data *pdata) +{ + struct tmio_mmc_host *_host; + struct mmc_host *mmc; + struct resource *res_ctl; + int ret; + u32 irq_mask = TMIO_MASK_CMD; + + res_ctl = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res_ctl) + return -EINVAL; + + mmc = mmc_alloc_host(sizeof(struct tmio_mmc_host), &pdev->dev); + if (!mmc) + return -ENOMEM; + + _host = mmc_priv(mmc); + _host->pdata = pdata; + _host->mmc = mmc; + _host->pdev = pdev; + platform_set_drvdata(pdev, mmc); + + _host->set_pwr = pdata->set_pwr; + _host->set_clk_div = pdata->set_clk_div; + + /* SD control register space size is 0x200, 0x400 for bus_shift=1 */ + _host->bus_shift = resource_size(res_ctl) >> 10; + + _host->ctl = ioremap(res_ctl->start, resource_size(res_ctl)); + if (!_host->ctl) { + ret = -ENOMEM; + goto host_free; + } + + mmc->ops = &tmio_mmc_ops; + mmc->caps = MMC_CAP_4_BIT_DATA | pdata->capabilities; + mmc->f_max = pdata->hclk; + mmc->f_min = mmc->f_max / 512; + mmc->max_segs = 32; + mmc->max_blk_size = 512; + mmc->max_blk_count = (PAGE_CACHE_SIZE / mmc->max_blk_size) * + mmc->max_segs; + mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count; + mmc->max_seg_size = mmc->max_req_size; + if (pdata->ocr_mask) + mmc->ocr_avail = pdata->ocr_mask; + else + mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34; + + tmio_mmc_clk_stop(_host); + tmio_mmc_reset(_host); + + ret = platform_get_irq(pdev, 0); + if (ret < 0) + goto unmap_ctl; + + _host->irq = ret; + + tmio_mmc_disable_mmc_irqs(_host, TMIO_MASK_ALL); + if (pdata->flags & TMIO_MMC_SDIO_IRQ) + tmio_mmc_enable_sdio_irq(mmc, 0); + + ret = request_irq(_host->irq, tmio_mmc_irq, IRQF_DISABLED | + IRQF_TRIGGER_FALLING, dev_name(&pdev->dev), _host); + if (ret) + goto unmap_ctl; + + spin_lock_init(&_host->lock); + + /* Init delayed work for request timeouts */ + INIT_DELAYED_WORK(&_host->delayed_reset_work, tmio_mmc_reset_work); + + /* See if we also get DMA */ + tmio_mmc_request_dma(_host, pdata); + + mmc_add_host(mmc); + + /* Unmask the IRQs we want to know about */ + if (!_host->chan_rx) + irq_mask |= TMIO_MASK_READOP; + if (!_host->chan_tx) + irq_mask |= TMIO_MASK_WRITEOP; + + tmio_mmc_enable_mmc_irqs(_host, irq_mask); + + *host = _host; + + return 0; + +unmap_ctl: + iounmap(_host->ctl); +host_free: + mmc_free_host(mmc); + + return ret; +} +EXPORT_SYMBOL(tmio_mmc_host_probe); + +void tmio_mmc_host_remove(struct tmio_mmc_host *host) +{ + mmc_remove_host(host->mmc); + cancel_delayed_work_sync(&host->delayed_reset_work); + tmio_mmc_release_dma(host); + free_irq(host->irq, host); + iounmap(host->ctl); + mmc_free_host(host->mmc); +} +EXPORT_SYMBOL(tmio_mmc_host_remove); + +MODULE_LICENSE("GPL v2"); |