Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 680 insertions, 0 deletions

diff --git a/drivers/mmc/mmci.c b/drivers/mmc/mmci.c
new file mode 100644
index 00000000000..3ee961c206b
--- /dev/null
+++ b/drivers/mmc/mmci.c
@@ -0,0 +1,680 @@
+/*
+ *  linux/drivers/mmc/mmci.c - ARM PrimeCell MMCI PL180/1 driver
+ *
+ *  Copyright (C) 2003 Deep Blue Solutions, Ltd, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/highmem.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/protocol.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/scatterlist.h>
+#include <asm/hardware/amba.h>
+#include <asm/hardware/clock.h>
+#include <asm/mach/mmc.h>
+
+#include "mmci.h"
+
+#define DRIVER_NAME "mmci-pl18x"
+
+#ifdef CONFIG_MMC_DEBUG
+#define DBG(host,fmt,args...)	\
+	pr_debug("%s: %s: " fmt, host->mmc->host_name, __func__ , args)
+#else
+#define DBG(host,fmt,args...)	do { } while (0)
+#endif
+
+static unsigned int fmax = 515633;
+
+static void
+mmci_request_end(struct mmci_host *host, struct mmc_request *mrq)
+{
+	writel(0, host->base + MMCICOMMAND);
+
+	host->mrq = NULL;
+	host->cmd = NULL;
+
+	if (mrq->data)
+		mrq->data->bytes_xfered = host->data_xfered;
+
+	/*
+	 * Need to drop the host lock here; mmc_request_done may call
+	 * back into the driver...
+	 */
+	spin_unlock(&host->lock);
+	mmc_request_done(host->mmc, mrq);
+	spin_lock(&host->lock);
+}
+
+static void mmci_stop_data(struct mmci_host *host)
+{
+	writel(0, host->base + MMCIDATACTRL);
+	writel(0, host->base + MMCIMASK1);
+	host->data = NULL;
+}
+
+static void mmci_start_data(struct mmci_host *host, struct mmc_data *data)
+{
+	unsigned int datactrl, timeout, irqmask;
+	void __iomem *base;
+
+	DBG(host, "blksz %04x blks %04x flags %08x\n",
+	    1 << data->blksz_bits, data->blocks, data->flags);
+
+	host->data = data;
+	host->size = data->blocks << data->blksz_bits;
+	host->data_xfered = 0;
+
+	mmci_init_sg(host, data);
+
+	timeout = data->timeout_clks +
+		  ((unsigned long long)data->timeout_ns * host->cclk) /
+		   1000000000ULL;
+
+	base = host->base;
+	writel(timeout, base + MMCIDATATIMER);
+	writel(host->size, base + MMCIDATALENGTH);
+
+	datactrl = MCI_DPSM_ENABLE | data->blksz_bits << 4;
+	if (data->flags & MMC_DATA_READ) {
+		datactrl |= MCI_DPSM_DIRECTION;
+		irqmask = MCI_RXFIFOHALFFULLMASK;
+	} else {
+		/*
+		 * We don't actually need to include "FIFO empty" here
+		 * since its implicit in "FIFO half empty".
+		 */
+		irqmask = MCI_TXFIFOHALFEMPTYMASK;
+	}
+
+	writel(datactrl, base + MMCIDATACTRL);
+	writel(readl(base + MMCIMASK0) & ~MCI_DATAENDMASK, base + MMCIMASK0);
+	writel(irqmask, base + MMCIMASK1);
+}
+
+static void
+mmci_start_command(struct mmci_host *host, struct mmc_command *cmd, u32 c)
+{
+	void __iomem *base = host->base;
+
+	DBG(host, "op %02x arg %08x flags %08x\n",
+	    cmd->opcode, cmd->arg, cmd->flags);
+
+	if (readl(base + MMCICOMMAND) & MCI_CPSM_ENABLE) {
+		writel(0, base + MMCICOMMAND);
+		udelay(1);
+	}
+
+	c |= cmd->opcode | MCI_CPSM_ENABLE;
+	switch (cmd->flags & MMC_RSP_MASK) {
+	case MMC_RSP_NONE:
+	default:
+		break;
+	case MMC_RSP_LONG:
+		c |= MCI_CPSM_LONGRSP;
+	case MMC_RSP_SHORT:
+		c |= MCI_CPSM_RESPONSE;
+		break;
+	}
+	if (/*interrupt*/0)
+		c |= MCI_CPSM_INTERRUPT;
+
+	host->cmd = cmd;
+
+	writel(cmd->arg, base + MMCIARGUMENT);
+	writel(c, base + MMCICOMMAND);
+}
+
+static void
+mmci_data_irq(struct mmci_host *host, struct mmc_data *data,
+	      unsigned int status)
+{
+	if (status & MCI_DATABLOCKEND) {
+		host->data_xfered += 1 << data->blksz_bits;
+	}
+	if (status & (MCI_DATACRCFAIL|MCI_DATATIMEOUT|MCI_TXUNDERRUN|MCI_RXOVERRUN)) {
+		if (status & MCI_DATACRCFAIL)
+			data->error = MMC_ERR_BADCRC;
+		else if (status & MCI_DATATIMEOUT)
+			data->error = MMC_ERR_TIMEOUT;
+		else if (status & (MCI_TXUNDERRUN|MCI_RXOVERRUN))
+			data->error = MMC_ERR_FIFO;
+		status |= MCI_DATAEND;
+	}
+	if (status & MCI_DATAEND) {
+		mmci_stop_data(host);
+
+		if (!data->stop) {
+			mmci_request_end(host, data->mrq);
+		} else {
+			mmci_start_command(host, data->stop, 0);
+		}
+	}
+}
+
+static void
+mmci_cmd_irq(struct mmci_host *host, struct mmc_command *cmd,
+	     unsigned int status)
+{
+	void __iomem *base = host->base;
+
+	host->cmd = NULL;
+
+	cmd->resp[0] = readl(base + MMCIRESPONSE0);
+	cmd->resp[1] = readl(base + MMCIRESPONSE1);
+	cmd->resp[2] = readl(base + MMCIRESPONSE2);
+	cmd->resp[3] = readl(base + MMCIRESPONSE3);
+
+	if (status & MCI_CMDTIMEOUT) {
+		cmd->error = MMC_ERR_TIMEOUT;
+	} else if (status & MCI_CMDCRCFAIL && cmd->flags & MMC_RSP_CRC) {
+		cmd->error = MMC_ERR_BADCRC;
+	}
+
+	if (!cmd->data || cmd->error != MMC_ERR_NONE) {
+		mmci_request_end(host, cmd->mrq);
+	} else if (!(cmd->data->flags & MMC_DATA_READ)) {
+		mmci_start_data(host, cmd->data);
+	}
+}
+
+static int mmci_pio_read(struct mmci_host *host, char *buffer, unsigned int remain)
+{
+	void __iomem *base = host->base;
+	char *ptr = buffer;
+	u32 status;
+
+	do {
+		int count = host->size - (readl(base + MMCIFIFOCNT) << 2);
+
+		if (count > remain)
+			count = remain;
+
+		if (count <= 0)
+			break;
+
+		readsl(base + MMCIFIFO, ptr, count >> 2);
+
+		ptr += count;
+		remain -= count;
+
+		if (remain == 0)
+			break;
+
+		status = readl(base + MMCISTATUS);
+	} while (status & MCI_RXDATAAVLBL);
+
+	return ptr - buffer;
+}
+
+static int mmci_pio_write(struct mmci_host *host, char *buffer, unsigned int remain, u32 status)
+{
+	void __iomem *base = host->base;
+	char *ptr = buffer;
+
+	do {
+		unsigned int count, maxcnt;
+
+		maxcnt = status & MCI_TXFIFOEMPTY ? MCI_FIFOSIZE : MCI_FIFOHALFSIZE;
+		count = min(remain, maxcnt);
+
+		writesl(base + MMCIFIFO, ptr, count >> 2);
+
+		ptr += count;
+		remain -= count;
+
+		if (remain == 0)
+			break;
+
+		status = readl(base + MMCISTATUS);
+	} while (status & MCI_TXFIFOHALFEMPTY);
+
+	return ptr - buffer;
+}
+
+/*
+ * PIO data transfer IRQ handler.
+ */
+static irqreturn_t mmci_pio_irq(int irq, void *dev_id, struct pt_regs *regs)
+{
+	struct mmci_host *host = dev_id;
+	void __iomem *base = host->base;
+	u32 status;
+
+	status = readl(base + MMCISTATUS);
+
+	DBG(host, "irq1 %08x\n", status);
+
+	do {
+		unsigned long flags;
+		unsigned int remain, len;
+		char *buffer;
+
+		/*
+		 * For write, we only need to test the half-empty flag
+		 * here - if the FIFO is completely empty, then by
+		 * definition it is more than half empty.
+		 *
+		 * For read, check for data available.
+		 */
+		if (!(status & (MCI_TXFIFOHALFEMPTY|MCI_RXDATAAVLBL)))
+			break;
+
+		/*
+		 * Map the current scatter buffer.
+		 */
+		buffer = mmci_kmap_atomic(host, &flags) + host->sg_off;
+		remain = host->sg_ptr->length - host->sg_off;
+
+		len = 0;
+		if (status & MCI_RXACTIVE)
+			len = mmci_pio_read(host, buffer, remain);
+		if (status & MCI_TXACTIVE)
+			len = mmci_pio_write(host, buffer, remain, status);
+
+		/*
+		 * Unmap the buffer.
+		 */
+		mmci_kunmap_atomic(host, &flags);
+
+		host->sg_off += len;
+		host->size -= len;
+		remain -= len;
+
+		if (remain)
+			break;
+
+		if (!mmci_next_sg(host))
+			break;
+
+		status = readl(base + MMCISTATUS);
+	} while (1);
+
+	/*
+	 * If we're nearing the end of the read, switch to
+	 * "any data available" mode.
+	 */
+	if (status & MCI_RXACTIVE && host->size < MCI_FIFOSIZE)
+		writel(MCI_RXDATAAVLBLMASK, base + MMCIMASK1);
+
+	/*
+	 * If we run out of data, disable the data IRQs; this
+	 * prevents a race where the FIFO becomes empty before
+	 * the chip itself has disabled the data path, and
+	 * stops us racing with our data end IRQ.
+	 */
+	if (host->size == 0) {
+		writel(0, base + MMCIMASK1);
+		writel(readl(base + MMCIMASK0) | MCI_DATAENDMASK, base + MMCIMASK0);
+	}
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * Handle completion of command and data transfers.
+ */
+static irqreturn_t mmci_irq(int irq, void *dev_id, struct pt_regs *regs)
+{
+	struct mmci_host *host = dev_id;
+	u32 status;
+	int ret = 0;
+
+	spin_lock(&host->lock);
+
+	do {
+		struct mmc_command *cmd;
+		struct mmc_data *data;
+
+		status = readl(host->base + MMCISTATUS);
+		status &= readl(host->base + MMCIMASK0);
+		writel(status, host->base + MMCICLEAR);
+
+		DBG(host, "irq0 %08x\n", status);
+
+		data = host->data;
+		if (status & (MCI_DATACRCFAIL|MCI_DATATIMEOUT|MCI_TXUNDERRUN|
+			      MCI_RXOVERRUN|MCI_DATAEND|MCI_DATABLOCKEND) && data)
+			mmci_data_irq(host, data, status);
+
+		cmd = host->cmd;
+		if (status & (MCI_CMDCRCFAIL|MCI_CMDTIMEOUT|MCI_CMDSENT|MCI_CMDRESPEND) && cmd)
+			mmci_cmd_irq(host, cmd, status);
+
+		ret = 1;
+	} while (status);
+
+	spin_unlock(&host->lock);
+
+	return IRQ_RETVAL(ret);
+}
+
+static void mmci_request(struct mmc_host *mmc, struct mmc_request *mrq)
+{
+	struct mmci_host *host = mmc_priv(mmc);
+
+	WARN_ON(host->mrq != NULL);
+
+	spin_lock_irq(&host->lock);
+
+	host->mrq = mrq;
+
+	if (mrq->data && mrq->data->flags & MMC_DATA_READ)
+		mmci_start_data(host, mrq->data);
+
+	mmci_start_command(host, mrq->cmd, 0);
+
+	spin_unlock_irq(&host->lock);
+}
+
+static void mmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+	struct mmci_host *host = mmc_priv(mmc);
+	u32 clk = 0, pwr = 0;
+
+	DBG(host, "clock %uHz busmode %u powermode %u Vdd %u\n",
+	    ios->clock, ios->bus_mode, ios->power_mode, ios->vdd);
+
+	if (ios->clock) {
+		if (ios->clock >= host->mclk) {
+			clk = MCI_CLK_BYPASS;
+			host->cclk = host->mclk;
+		} else {
+			clk = host->mclk / (2 * ios->clock) - 1;
+			if (clk > 256)
+				clk = 255;
+			host->cclk = host->mclk / (2 * (clk + 1));
+		}
+		clk |= MCI_CLK_ENABLE;
+	}
+
+	if (host->plat->translate_vdd)
+		pwr |= host->plat->translate_vdd(mmc_dev(mmc), ios->vdd);
+
+	switch (ios->power_mode) {
+	case MMC_POWER_OFF:
+		break;
+	case MMC_POWER_UP:
+		pwr |= MCI_PWR_UP;
+		break;
+	case MMC_POWER_ON:
+		pwr |= MCI_PWR_ON;
+		break;
+	}
+
+	if (ios->bus_mode == MMC_BUSMODE_OPENDRAIN)
+		pwr |= MCI_ROD;
+
+	writel(clk, host->base + MMCICLOCK);
+
+	if (host->pwr != pwr) {
+		host->pwr = pwr;
+		writel(pwr, host->base + MMCIPOWER);
+	}
+}
+
+static struct mmc_host_ops mmci_ops = {
+	.request	= mmci_request,
+	.set_ios	= mmci_set_ios,
+};
+
+static void mmci_check_status(unsigned long data)
+{
+	struct mmci_host *host = (struct mmci_host *)data;
+	unsigned int status;
+
+	status = host->plat->status(mmc_dev(host->mmc));
+	if (status ^ host->oldstat)
+		mmc_detect_change(host->mmc);
+
+	host->oldstat = status;
+	mod_timer(&host->timer, jiffies + HZ);
+}
+
+static int mmci_probe(struct amba_device *dev, void *id)
+{
+	struct mmc_platform_data *plat = dev->dev.platform_data;
+	struct mmci_host *host;
+	struct mmc_host *mmc;
+	int ret;
+
+	/* must have platform data */
+	if (!plat) {
+		ret = -EINVAL;
+		goto out;
+	}
+
+	ret = amba_request_regions(dev, DRIVER_NAME);
+	if (ret)
+		goto out;
+
+	mmc = mmc_alloc_host(sizeof(struct mmci_host), &dev->dev);
+	if (!mmc) {
+		ret = -ENOMEM;
+		goto rel_regions;
+	}
+
+	host = mmc_priv(mmc);
+	host->clk = clk_get(&dev->dev, "MCLK");
+	if (IS_ERR(host->clk)) {
+		ret = PTR_ERR(host->clk);
+		host->clk = NULL;
+		goto host_free;
+	}
+
+	ret = clk_use(host->clk);
+	if (ret)
+		goto clk_free;
+
+	ret = clk_enable(host->clk);
+	if (ret)
+		goto clk_unuse;
+
+	host->plat = plat;
+	host->mclk = clk_get_rate(host->clk);
+	host->mmc = mmc;
+	host->base = ioremap(dev->res.start, SZ_4K);
+	if (!host->base) {
+		ret = -ENOMEM;
+		goto clk_disable;
+	}
+
+	mmc->ops = &mmci_ops;
+	mmc->f_min = (host->mclk + 511) / 512;
+	mmc->f_max = min(host->mclk, fmax);
+	mmc->ocr_avail = plat->ocr_mask;
+
+	/*
+	 * We can do SGIO
+	 */
+	mmc->max_hw_segs = 16;
+	mmc->max_phys_segs = NR_SG;
+
+	/*
+	 * Since we only have a 16-bit data length register, we must
+	 * ensure that we don't exceed 2^16-1 bytes in a single request.
+	 * Choose 64 (512-byte) sectors as the limit.
+	 */
+	mmc->max_sectors = 64;
+
+	/*
+	 * Set the maximum segment size.  Since we aren't doing DMA
+	 * (yet) we are only limited by the data length register.
+	 */
+	mmc->max_seg_size = mmc->max_sectors << 9;
+
+	spin_lock_init(&host->lock);
+
+	writel(0, host->base + MMCIMASK0);
+	writel(0, host->base + MMCIMASK1);
+	writel(0xfff, host->base + MMCICLEAR);
+
+	ret = request_irq(dev->irq[0], mmci_irq, SA_SHIRQ, DRIVER_NAME " (cmd)", host);
+	if (ret)
+		goto unmap;
+
+	ret = request_irq(dev->irq[1], mmci_pio_irq, SA_SHIRQ, DRIVER_NAME " (pio)", host);
+	if (ret)
+		goto irq0_free;
+
+	writel(MCI_IRQENABLE, host->base + MMCIMASK0);
+
+	amba_set_drvdata(dev, mmc);
+
+	mmc_add_host(mmc);
+
+	printk(KERN_INFO "%s: MMCI rev %x cfg %02x at 0x%08lx irq %d,%d\n",
+		mmc->host_name, amba_rev(dev), amba_config(dev),
+		dev->res.start, dev->irq[0], dev->irq[1]);
+
+	init_timer(&host->timer);
+	host->timer.data = (unsigned long)host;
+	host->timer.function = mmci_check_status;
+	host->timer.expires = jiffies + HZ;
+	add_timer(&host->timer);
+
+	return 0;
+
+ irq0_free:
+	free_irq(dev->irq[0], host);
+ unmap:
+	iounmap(host->base);
+ clk_disable:
+	clk_disable(host->clk);
+ clk_unuse:
+	clk_unuse(host->clk);
+ clk_free:
+	clk_put(host->clk);
+ host_free:
+	mmc_free_host(mmc);
+ rel_regions:
+	amba_release_regions(dev);
+ out:
+	return ret;
+}
+
+static int mmci_remove(struct amba_device *dev)
+{
+	struct mmc_host *mmc = amba_get_drvdata(dev);
+
+	amba_set_drvdata(dev, NULL);
+
+	if (mmc) {
+		struct mmci_host *host = mmc_priv(mmc);
+
+		del_timer_sync(&host->timer);
+
+		mmc_remove_host(mmc);
+
+		writel(0, host->base + MMCIMASK0);
+		writel(0, host->base + MMCIMASK1);
+
+		writel(0, host->base + MMCICOMMAND);
+		writel(0, host->base + MMCIDATACTRL);
+
+		free_irq(dev->irq[0], host);
+		free_irq(dev->irq[1], host);
+
+		iounmap(host->base);
+		clk_disable(host->clk);
+		clk_unuse(host->clk);
+		clk_put(host->clk);
+
+		mmc_free_host(mmc);
+
+		amba_release_regions(dev);
+	}
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int mmci_suspend(struct amba_device *dev, u32 state)
+{
+	struct mmc_host *mmc = amba_get_drvdata(dev);
+	int ret = 0;
+
+	if (mmc) {
+		struct mmci_host *host = mmc_priv(mmc);
+
+		ret = mmc_suspend_host(mmc, state);
+		if (ret == 0)
+			writel(0, host->base + MMCIMASK0);
+	}
+
+	return ret;
+}
+
+static int mmci_resume(struct amba_device *dev)
+{
+	struct mmc_host *mmc = amba_get_drvdata(dev);
+	int ret = 0;
+
+	if (mmc) {
+		struct mmci_host *host = mmc_priv(mmc);
+
+		writel(MCI_IRQENABLE, host->base + MMCIMASK0);
+
+		ret = mmc_resume_host(mmc);
+	}
+
+	return ret;
+}
+#else
+#define mmci_suspend	NULL
+#define mmci_resume	NULL
+#endif
+
+static struct amba_id mmci_ids[] = {
+	{
+		.id	= 0x00041180,
+		.mask	= 0x000fffff,
+	},
+	{
+		.id	= 0x00041181,
+		.mask	= 0x000fffff,
+	},
+	{ 0, 0 },
+};
+
+static struct amba_driver mmci_driver = {
+	.drv		= {
+		.name	= DRIVER_NAME,
+	},
+	.probe		= mmci_probe,
+	.remove		= mmci_remove,
+	.suspend	= mmci_suspend,
+	.resume		= mmci_resume,
+	.id_table	= mmci_ids,
+};
+
+static int __init mmci_init(void)
+{
+	return amba_driver_register(&mmci_driver);
+}
+
+static void __exit mmci_exit(void)
+{
+	amba_driver_unregister(&mmci_driver);
+}
+
+module_init(mmci_init);
+module_exit(mmci_exit);
+module_param(fmax, uint, 0444);
+
+MODULE_DESCRIPTION("ARM PrimeCell PL180/181 Multimedia Card Interface driver");
+MODULE_LICENSE("GPL");