diff options
author | Pierre Ossman <drzeus-list@cx.rmk.(none)> | 2005-05-08 19:35:27 +0100 |
---|---|---|
committer | Russell King <rmk+kernel@arm.linux.org.uk> | 2005-05-08 19:35:27 +0100 |
commit | 85bcc13072c54592596c5b41d40d1c6a18b04e19 (patch) | |
tree | 1f3fe7a88f37ed72f6cdaf6117f0299caf4ab59a /drivers/mmc/wbsd.c | |
parent | 88d7bd8cb9eb8d64bf7997600b0d64f7834047c5 (diff) |
[PATCH] MMC: wbsd update
Updates to the wbsd driver.
* Fix to handle DAT3 card detection.
* Fixed bug which could cause large writes to stall in FIFO mode.
* Plug 'n Play support. In most cases you need ACPI PNP for this to work.
* Uses generic DMA API (ISA dependency removed).
Diffstat (limited to 'drivers/mmc/wbsd.c')
-rw-r--r-- | drivers/mmc/wbsd.c | 716 |
1 files changed, 531 insertions, 185 deletions
diff --git a/drivers/mmc/wbsd.c b/drivers/mmc/wbsd.c index 39747526c71..b7fbd30b49a 100644 --- a/drivers/mmc/wbsd.c +++ b/drivers/mmc/wbsd.c @@ -28,7 +28,9 @@ #include <linux/ioport.h> #include <linux/device.h> #include <linux/interrupt.h> +#include <linux/dma-mapping.h> #include <linux/delay.h> +#include <linux/pnp.h> #include <linux/highmem.h> #include <linux/mmc/host.h> #include <linux/mmc/protocol.h> @@ -40,7 +42,7 @@ #include "wbsd.h" #define DRIVER_NAME "wbsd" -#define DRIVER_VERSION "1.1" +#define DRIVER_VERSION "1.2" #ifdef CONFIG_MMC_DEBUG #define DBG(x...) \ @@ -52,10 +54,6 @@ #define DBGF(x...) do { } while (0) #endif -static unsigned int io = 0x248; -static unsigned int irq = 6; -static int dma = 2; - #ifdef CONFIG_MMC_DEBUG void DBG_REG(int reg, u8 value) { @@ -79,28 +77,61 @@ void DBG_REG(int reg, u8 value) #endif /* + * Device resources + */ + +#ifdef CONFIG_PNP + +static const struct pnp_device_id pnp_dev_table[] = { + { "WEC0517", 0 }, + { "WEC0518", 0 }, + { "", 0 }, +}; + +MODULE_DEVICE_TABLE(pnp, pnp_dev_table); + +#endif /* CONFIG_PNP */ + +#ifdef CONFIG_PNP +static unsigned int nopnp = 0; +#else +static const unsigned int nopnp = 1; +#endif +static unsigned int io = 0x248; +static unsigned int irq = 6; +static int dma = 2; + +/* * Basic functions */ static inline void wbsd_unlock_config(struct wbsd_host* host) { + BUG_ON(host->config == 0); + outb(host->unlock_code, host->config); outb(host->unlock_code, host->config); } static inline void wbsd_lock_config(struct wbsd_host* host) { + BUG_ON(host->config == 0); + outb(LOCK_CODE, host->config); } static inline void wbsd_write_config(struct wbsd_host* host, u8 reg, u8 value) { + BUG_ON(host->config == 0); + outb(reg, host->config); outb(value, host->config + 1); } static inline u8 wbsd_read_config(struct wbsd_host* host, u8 reg) { + BUG_ON(host->config == 0); + outb(reg, host->config); return inb(host->config + 1); } @@ -133,6 +164,13 @@ static void wbsd_init_device(struct wbsd_host* host) wbsd_write_index(host, WBSD_IDX_SETUP, setup); /* + * Set DAT3 to input + */ + setup &= ~WBSD_DAT3_H; + wbsd_write_index(host, WBSD_IDX_SETUP, setup); + host->flags &= ~WBSD_FIGNORE_DETECT; + + /* * Read back default clock. */ host->clk = wbsd_read_index(host, WBSD_IDX_CLK); @@ -148,6 +186,14 @@ static void wbsd_init_device(struct wbsd_host* host) wbsd_write_index(host, WBSD_IDX_TAAC, 0x7F); /* + * Test for card presence + */ + if (inb(host->base + WBSD_CSR) & WBSD_CARDPRESENT) + host->flags |= WBSD_FCARD_PRESENT; + else + host->flags &= ~WBSD_FCARD_PRESENT; + + /* * Enable interesting interrupts. */ ier = 0; @@ -407,8 +453,6 @@ static inline void wbsd_get_long_reply(struct wbsd_host* host, } } -static irqreturn_t wbsd_irq(int irq, void *dev_id, struct pt_regs *regs); - static void wbsd_send_command(struct wbsd_host* host, struct mmc_command* cmd) { int i; @@ -646,6 +690,13 @@ static void wbsd_fill_fifo(struct wbsd_host* host) } wbsd_kunmap_sg(host); + + /* + * The controller stops sending interrupts for + * 'FIFO empty' under certain conditions. So we + * need to be a bit more pro-active. + */ + tasklet_schedule(&host->fifo_tasklet); } static void wbsd_prepare_data(struct wbsd_host* host, struct mmc_data* data) @@ -850,9 +901,11 @@ static void wbsd_finish_data(struct wbsd_host* host, struct mmc_data* data) wbsd_request_end(host, host->mrq); } -/* - * MMC Callbacks - */ +/*****************************************************************************\ + * * + * MMC layer callbacks * + * * +\*****************************************************************************/ static void wbsd_request(struct mmc_host* mmc, struct mmc_request* mrq) { @@ -874,7 +927,7 @@ static void wbsd_request(struct mmc_host* mmc, struct mmc_request* mrq) * If there is no card in the slot then * timeout immediatly. */ - if (!(inb(host->base + WBSD_CSR) & WBSD_CARDPRESENT)) + if (!(host->flags & WBSD_FCARD_PRESENT)) { cmd->error = MMC_ERR_TIMEOUT; goto done; @@ -953,33 +1006,50 @@ static void wbsd_set_ios(struct mmc_host* mmc, struct mmc_ios* ios) host->clk = clk; } + /* + * Power up card. + */ if (ios->power_mode != MMC_POWER_OFF) { - /* - * Power up card. - */ pwr = inb(host->base + WBSD_CSR); pwr &= ~WBSD_POWER_N; outb(pwr, host->base + WBSD_CSR); - - /* - * This behaviour is stolen from the - * Windows driver. Don't know why, but - * it is needed. - */ - setup = wbsd_read_index(host, WBSD_IDX_SETUP); - if (ios->bus_mode == MMC_BUSMODE_OPENDRAIN) - setup |= WBSD_DAT3_H; - else - setup &= ~WBSD_DAT3_H; - wbsd_write_index(host, WBSD_IDX_SETUP, setup); - - mdelay(1); } + /* + * MMC cards need to have pin 1 high during init. + * Init time corresponds rather nicely with the bus mode. + * It wreaks havoc with the card detection though so + * that needs to be disabed. + */ + setup = wbsd_read_index(host, WBSD_IDX_SETUP); + if ((ios->power_mode == MMC_POWER_ON) && + (ios->bus_mode == MMC_BUSMODE_OPENDRAIN)) + { + setup |= WBSD_DAT3_H; + host->flags |= WBSD_FIGNORE_DETECT; + } + else + { + setup &= ~WBSD_DAT3_H; + host->flags &= ~WBSD_FIGNORE_DETECT; + } + wbsd_write_index(host, WBSD_IDX_SETUP, setup); + spin_unlock_bh(&host->lock); } +static struct mmc_host_ops wbsd_ops = { + .request = wbsd_request, + .set_ios = wbsd_set_ios, +}; + +/*****************************************************************************\ + * * + * Interrupt handling * + * * +\*****************************************************************************/ + /* * Tasklets */ @@ -1005,17 +1075,33 @@ static void wbsd_tasklet_card(unsigned long param) { struct wbsd_host* host = (struct wbsd_host*)param; u8 csr; + int change = 0; spin_lock(&host->lock); + if (host->flags & WBSD_FIGNORE_DETECT) + { + spin_unlock(&host->lock); + return; + } + csr = inb(host->base + WBSD_CSR); WARN_ON(csr == 0xff); if (csr & WBSD_CARDPRESENT) - DBG("Card inserted\n"); - else + { + if (!(host->flags & WBSD_FCARD_PRESENT)) + { + DBG("Card inserted\n"); + host->flags |= WBSD_FCARD_PRESENT; + change = 1; + } + } + else if (host->flags & WBSD_FCARD_PRESENT) { DBG("Card removed\n"); + host->flags &= ~WBSD_FCARD_PRESENT; + change = 1; if (host->mrq) { @@ -1033,7 +1119,8 @@ static void wbsd_tasklet_card(unsigned long param) */ spin_unlock(&host->lock); - mmc_detect_change(host->mmc); + if (change) + mmc_detect_change(host->mmc); } static void wbsd_tasklet_fifo(unsigned long param) @@ -1200,11 +1287,85 @@ static irqreturn_t wbsd_irq(int irq, void *dev_id, struct pt_regs *regs) return IRQ_HANDLED; } +/*****************************************************************************\ + * * + * Device initialisation and shutdown * + * * +\*****************************************************************************/ + /* - * Support functions for probe + * Allocate/free MMC structure. */ -static int wbsd_scan(struct wbsd_host* host) +static int __devinit wbsd_alloc_mmc(struct device* dev) +{ + struct mmc_host* mmc; + struct wbsd_host* host; + + /* + * Allocate MMC structure. + */ + mmc = mmc_alloc_host(sizeof(struct wbsd_host), dev); + if (!mmc) + return -ENOMEM; + + host = mmc_priv(mmc); + host->mmc = mmc; + + host->dma = -1; + + /* + * Set host parameters. + */ + mmc->ops = &wbsd_ops; + mmc->f_min = 375000; + mmc->f_max = 24000000; + mmc->ocr_avail = MMC_VDD_32_33|MMC_VDD_33_34; + + spin_lock_init(&host->lock); + + /* + * Maximum number of segments. Worst case is one sector per segment + * so this will be 64kB/512. + */ + mmc->max_hw_segs = 128; + mmc->max_phys_segs = 128; + + /* + * Maximum number of sectors in one transfer. Also limited by 64kB + * buffer. + */ + mmc->max_sectors = 128; + + /* + * Maximum segment size. Could be one segment with the maximum number + * of segments. + */ + mmc->max_seg_size = mmc->max_sectors * 512; + + dev_set_drvdata(dev, mmc); + + return 0; +} + +static void __devexit wbsd_free_mmc(struct device* dev) +{ + struct mmc_host* mmc; + + mmc = dev_get_drvdata(dev); + if (!mmc) + return; + + mmc_free_host(mmc); + + dev_set_drvdata(dev, NULL); +} + +/* + * Scan for known chip id:s + */ + +static int __devinit wbsd_scan(struct wbsd_host* host) { int i, j, k; int id; @@ -1258,12 +1419,16 @@ static int wbsd_scan(struct wbsd_host* host) return -ENODEV; } -static int wbsd_request_regions(struct wbsd_host* host) +/* + * Allocate/free io port ranges + */ + +static int __devinit wbsd_request_region(struct wbsd_host* host, int base) { if (io & 0x7) return -EINVAL; - if (!request_region(io, 8, DRIVER_NAME)) + if (!request_region(base, 8, DRIVER_NAME)) return -EIO; host->base = io; @@ -1271,19 +1436,25 @@ static int wbsd_request_regions(struct wbsd_host* host) return 0; } -static void wbsd_release_regions(struct wbsd_host* host) +static void __devexit wbsd_release_regions(struct wbsd_host* host) { if (host->base) release_region(host->base, 8); + + host->base = 0; if (host->config) release_region(host->config, 2); + + host->config = 0; } -static void wbsd_init_dma(struct wbsd_host* host) +/* + * Allocate/free DMA port and buffer + */ + +static void __devinit wbsd_request_dma(struct wbsd_host* host, int dma) { - host->dma = -1; - if (dma < 0) return; @@ -1294,7 +1465,7 @@ static void wbsd_init_dma(struct wbsd_host* host) * We need to allocate a special buffer in * order for ISA to be able to DMA to it. */ - host->dma_buffer = kmalloc(65536, + host->dma_buffer = kmalloc(WBSD_DMA_SIZE, GFP_NOIO | GFP_DMA | __GFP_REPEAT | __GFP_NOWARN); if (!host->dma_buffer) goto free; @@ -1302,7 +1473,8 @@ static void wbsd_init_dma(struct wbsd_host* host) /* * Translate the address to a physical address. */ - host->dma_addr = isa_virt_to_bus(host->dma_buffer); + host->dma_addr = dma_map_single(host->mmc->dev, host->dma_buffer, + WBSD_DMA_SIZE, DMA_BIDIRECTIONAL); /* * ISA DMA must be aligned on a 64k basis. @@ -1325,6 +1497,10 @@ kfree: */ BUG_ON(1); + dma_unmap_single(host->mmc->dev, host->dma_addr, WBSD_DMA_SIZE, + DMA_BIDIRECTIONAL); + host->dma_addr = (dma_addr_t)NULL; + kfree(host->dma_buffer); host->dma_buffer = NULL; @@ -1336,60 +1512,122 @@ err: "Falling back on FIFO.\n", dma); } -static struct mmc_host_ops wbsd_ops = { - .request = wbsd_request, - .set_ios = wbsd_set_ios, -}; +static void __devexit wbsd_release_dma(struct wbsd_host* host) +{ + if (host->dma_addr) + dma_unmap_single(host->mmc->dev, host->dma_addr, WBSD_DMA_SIZE, + DMA_BIDIRECTIONAL); + if (host->dma_buffer) + kfree(host->dma_buffer); + if (host->dma >= 0) + free_dma(host->dma); + + host->dma = -1; + host->dma_buffer = NULL; + host->dma_addr = (dma_addr_t)NULL; +} /* - * Device probe + * Allocate/free IRQ. */ -static int wbsd_probe(struct device* dev) +static int __devinit wbsd_request_irq(struct wbsd_host* host, int irq) { - struct wbsd_host* host = NULL; - struct mmc_host* mmc = NULL; int ret; /* - * Allocate MMC structure. + * Allocate interrupt. */ - mmc = mmc_alloc_host(sizeof(struct wbsd_host), dev); - if (!mmc) - return -ENOMEM; - - host = mmc_priv(mmc); - host->mmc = mmc; + + ret = request_irq(irq, wbsd_irq, SA_SHIRQ, DRIVER_NAME, host); + if (ret) + return ret; + host->irq = irq; + /* - * Scan for hardware. + * Set up tasklets. */ - ret = wbsd_scan(host); - if (ret) - goto freemmc; + tasklet_init(&host->card_tasklet, wbsd_tasklet_card, (unsigned long)host); + tasklet_init(&host->fifo_tasklet, wbsd_tasklet_fifo, (unsigned long)host); + tasklet_init(&host->crc_tasklet, wbsd_tasklet_crc, (unsigned long)host); + tasklet_init(&host->timeout_tasklet, wbsd_tasklet_timeout, (unsigned long)host); + tasklet_init(&host->finish_tasklet, wbsd_tasklet_finish, (unsigned long)host); + tasklet_init(&host->block_tasklet, wbsd_tasklet_block, (unsigned long)host); + + return 0; +} - /* - * Reset the chip. - */ - wbsd_write_config(host, WBSD_CONF_SWRST, 1); - wbsd_write_config(host, WBSD_CONF_SWRST, 0); +static void __devexit wbsd_release_irq(struct wbsd_host* host) +{ + if (!host->irq) + return; + free_irq(host->irq, host); + + host->irq = 0; + + tasklet_kill(&host->card_tasklet); + tasklet_kill(&host->fifo_tasklet); + tasklet_kill(&host->crc_tasklet); + tasklet_kill(&host->timeout_tasklet); + tasklet_kill(&host->finish_tasklet); + tasklet_kill(&host->block_tasklet); +} + +/* + * Allocate all resources for the host. + */ + +static int __devinit wbsd_request_resources(struct wbsd_host* host, + int base, int irq, int dma) +{ + int ret; + /* * Allocate I/O ports. */ - ret = wbsd_request_regions(host); + ret = wbsd_request_region(host, base); if (ret) - goto release; + return ret; /* - * Set host parameters. + * Allocate interrupt. */ - mmc->ops = &wbsd_ops; - mmc->f_min = 375000; - mmc->f_max = 24000000; - mmc->ocr_avail = MMC_VDD_32_33|MMC_VDD_33_34; + ret = wbsd_request_irq(host, irq); + if (ret) + return ret; + + /* + * Allocate DMA. + */ + wbsd_request_dma(host, dma); - spin_lock_init(&host->lock); + return 0; +} + +/* + * Release all resources for the host. + */ + +static void __devexit wbsd_release_resources(struct wbsd_host* host) +{ + wbsd_release_dma(host); + wbsd_release_irq(host); + wbsd_release_regions(host); +} + +/* + * Configure the resources the chip should use. + */ + +static void __devinit wbsd_chip_config(struct wbsd_host* host) +{ + /* + * Reset the chip. + */ + wbsd_write_config(host, WBSD_CONF_SWRST, 1); + wbsd_write_config(host, WBSD_CONF_SWRST, 0); /* * Select SD/MMC function. @@ -1399,165 +1637,241 @@ static int wbsd_probe(struct device* dev) /* * Set up card detection. */ - wbsd_write_config(host, WBSD_CONF_PINS, 0x02); + wbsd_write_config(host, WBSD_CONF_PINS, WBSD_PINS_DETECT_GP11); /* - * Configure I/O port. + * Configure chip */ wbsd_write_config(host, WBSD_CONF_PORT_HI, host->base >> 8); wbsd_write_config(host, WBSD_CONF_PORT_LO, host->base & 0xff); - - /* - * Allocate interrupt. - */ - ret = request_irq(irq, wbsd_irq, SA_SHIRQ, DRIVER_NAME, host); - if (ret) - goto release; - host->irq = irq; + wbsd_write_config(host, WBSD_CONF_IRQ, host->irq); - /* - * Set up tasklets. - */ - tasklet_init(&host->card_tasklet, wbsd_tasklet_card, (unsigned long)host); - tasklet_init(&host->fifo_tasklet, wbsd_tasklet_fifo, (unsigned long)host); - tasklet_init(&host->crc_tasklet, wbsd_tasklet_crc, (unsigned long)host); - tasklet_init(&host->timeout_tasklet, wbsd_tasklet_timeout, (unsigned long)host); - tasklet_init(&host->finish_tasklet, wbsd_tasklet_finish, (unsigned long)host); - tasklet_init(&host->block_tasklet, wbsd_tasklet_block, (unsigned long)host); + if (host->dma >= 0) + wbsd_write_config(host, WBSD_CONF_DRQ, host->dma); /* - * Configure interrupt. + * Enable and power up chip. */ - wbsd_write_config(host, WBSD_CONF_IRQ, host->irq); + wbsd_write_config(host, WBSD_CONF_ENABLE, 1); + wbsd_write_config(host, WBSD_CONF_POWER, 0x20); +} + +/* + * Check that configured resources are correct. + */ + +static int __devinit wbsd_chip_validate(struct wbsd_host* host) +{ + int base, irq, dma; /* - * Allocate DMA. + * Select SD/MMC function. */ - wbsd_init_dma(host); + wbsd_write_config(host, WBSD_CONF_DEVICE, DEVICE_SD); /* - * If all went well, then configure DMA. + * Read configuration. */ - if (host->dma >= 0) - wbsd_write_config(host, WBSD_CONF_DRQ, host->dma); + base = wbsd_read_config(host, WBSD_CONF_PORT_HI) << 8; + base |= wbsd_read_config(host, WBSD_CONF_PORT_LO); - /* - * Maximum number of segments. Worst case is one sector per segment - * so this will be 64kB/512. - */ - mmc->max_hw_segs = 128; - mmc->max_phys_segs = 128; + irq = wbsd_read_config(host, WBSD_CONF_IRQ); + + dma = wbsd_read_config(host, WBSD_CONF_DRQ); /* - * Maximum number of sectors in one transfer. Also limited by 64kB - * buffer. + * Validate against given configuration. */ - mmc->max_sectors = 128; + if (base != host->base) + return 0; + if (irq != host->irq) + return 0; + if ((dma != host->dma) && (host->dma != -1)) + return 0; + + return 1; +} + +/*****************************************************************************\ + * * + * Devices setup and shutdown * + * * +\*****************************************************************************/ + +static int __devinit wbsd_init(struct device* dev, int base, int irq, int dma, + int pnp) +{ + struct wbsd_host* host = NULL; + struct mmc_host* mmc = NULL; + int ret; + + ret = wbsd_alloc_mmc(dev); + if (ret) + return ret; + + mmc = dev_get_drvdata(dev); + host = mmc_priv(mmc); /* - * Maximum segment size. Could be one segment with the maximum number - * of segments. + * Scan for hardware. */ - mmc->max_seg_size = mmc->max_sectors * 512; + ret = wbsd_scan(host); + if (ret) + { + if (pnp && (ret == -ENODEV)) + { + printk(KERN_WARNING DRIVER_NAME + ": Unable to confirm device presence. You may " + "experience lock-ups.\n"); + } + else + { + wbsd_free_mmc(dev); + return ret; + } + } /* - * Enable chip. + * Request resources. */ - wbsd_write_config(host, WBSD_CONF_ENABLE, 1); + ret = wbsd_request_resources(host, io, irq, dma); + if (ret) + { + wbsd_release_resources(host); + wbsd_free_mmc(dev); + return ret; + } /* - * Power up chip. + * See if chip needs to be configured. */ - wbsd_write_config(host, WBSD_CONF_POWER, 0x20); + if (pnp && (host->config != 0)) + { + if (!wbsd_chip_validate(host)) + { + printk(KERN_WARNING DRIVER_NAME + ": PnP active but chip not configured! " + "You probably have a buggy BIOS. " + "Configuring chip manually.\n"); + wbsd_chip_config(host); + } + } + else + wbsd_chip_config(host); /* * Power Management stuff. No idea how this works. * Not tested. */ #ifdef CONFIG_PM - wbsd_write_config(host, WBSD_CONF_PME, 0xA0); + if (host->config) + wbsd_write_config(host, WBSD_CONF_PME, 0xA0); #endif + /* + * Allow device to initialise itself properly. + */ + mdelay(5); /* * Reset the chip into a known state. */ wbsd_init_device(host); - dev_set_drvdata(dev, mmc); - - /* - * Add host to MMC layer. - */ mmc_add_host(mmc); - printk(KERN_INFO "%s: W83L51xD id %x at 0x%x irq %d dma %d\n", - mmc->host_name, (int)host->chip_id, (int)host->base, - (int)host->irq, (int)host->dma); + printk(KERN_INFO "%s: W83L51xD", mmc->host_name); + if (host->chip_id != 0) + printk(" id %x", (int)host->chip_id); + printk(" at 0x%x irq %d", (int)host->base, (int)host->irq); + if (host->dma >= 0) + printk(" dma %d", (int)host->dma); + else + printk(" FIFO"); + if (pnp) + printk(" PnP"); + printk("\n"); return 0; - -release: - wbsd_release_regions(host); - -freemmc: - mmc_free_host(mmc); - - return ret; } -/* - * Device remove - */ - -static int wbsd_remove(struct device* dev) +static void __devexit wbsd_shutdown(struct device* dev, int pnp) { struct mmc_host* mmc = dev_get_drvdata(dev); struct wbsd_host* host; if (!mmc) - return 0; + return; host = mmc_priv(mmc); - /* - * Unregister host with MMC layer. - */ mmc_remove_host(mmc); - /* - * Power down the SD/MMC function. - */ - wbsd_unlock_config(host); - wbsd_write_config(host, WBSD_CONF_DEVICE, DEVICE_SD); - wbsd_write_config(host, WBSD_CONF_ENABLE, 0); - wbsd_lock_config(host); + if (!pnp) + { + /* + * Power down the SD/MMC function. + */ + wbsd_unlock_config(host); + wbsd_write_config(host, WBSD_CONF_DEVICE, DEVICE_SD); + wbsd_write_config(host, WBSD_CONF_ENABLE, 0); + wbsd_lock_config(host); + } - /* - * Free resources. - */ - if (host->dma_buffer) - kfree(host->dma_buffer); + wbsd_release_resources(host); - if (host->dma >= 0) - free_dma(host->dma); + wbsd_free_mmc(dev); +} - free_irq(host->irq, host); +/* + * Non-PnP + */ + +static int __devinit wbsd_probe(struct device* dev) +{ + return wbsd_init(dev, io, irq, dma, 0); +} + +static int __devexit wbsd_remove(struct device* dev) +{ + wbsd_shutdown(dev, 0); + + return 0; +} + +/* + * PnP + */ + +#ifdef CONFIG_PNP + +static int __devinit +wbsd_pnp_probe(struct pnp_dev * pnpdev, const struct pnp_device_id *dev_id) +{ + int io, irq, dma; - tasklet_kill(&host->card_tasklet); - tasklet_kill(&host->fifo_tasklet); - tasklet_kill(&host->crc_tasklet); - tasklet_kill(&host->timeout_tasklet); - tasklet_kill(&host->finish_tasklet); - tasklet_kill(&host->block_tasklet); + /* + * Get resources from PnP layer. + */ + io = pnp_port_start(pnpdev, 0); + irq = pnp_irq(pnpdev, 0); + if (pnp_dma_valid(pnpdev, 0)) + dma = pnp_dma(pnpdev, 0); + else + dma = -1; - wbsd_release_regions(host); + DBGF("PnP resources: port %3x irq %d dma %d\n", io, irq, dma); - mmc_free_host(mmc); + return wbsd_init(&pnpdev->dev, io, irq, dma, 1); +} - return 0; +static void __devexit wbsd_pnp_remove(struct pnp_dev * dev) +{ + wbsd_shutdown(&dev->dev, 1); } +#endif /* CONFIG_PNP */ + /* * Power management */ @@ -1581,17 +1895,7 @@ static int wbsd_resume(struct device *dev, u32 level) #define wbsd_resume NULL #endif -static void wbsd_release(struct device *dev) -{ -} - -static struct platform_device wbsd_device = { - .name = DRIVER_NAME, - .id = -1, - .dev = { - .release = wbsd_release, - }, -}; +static struct platform_device *wbsd_device; static struct device_driver wbsd_driver = { .name = DRIVER_NAME, @@ -1603,6 +1907,17 @@ static struct device_driver wbsd_driver = { .resume = wbsd_resume, }; +#ifdef CONFIG_PNP + +static struct pnp_driver wbsd_pnp_driver = { + .name = DRIVER_NAME, + .id_table = pnp_dev_table, + .probe = wbsd_pnp_probe, + .remove = wbsd_pnp_remove, +}; + +#endif /* CONFIG_PNP */ + /* * Module loading/unloading */ @@ -1615,29 +1930,57 @@ static int __init wbsd_drv_init(void) ": Winbond W83L51xD SD/MMC card interface driver, " DRIVER_VERSION "\n"); printk(KERN_INFO DRIVER_NAME ": Copyright(c) Pierre Ossman\n"); - - result = driver_register(&wbsd_driver); - if (result < 0) - return result; - result = platform_device_register(&wbsd_device); - if (result < 0) - return result; +#ifdef CONFIG_PNP + + if (!nopnp) + { + result = pnp_register_driver(&wbsd_pnp_driver); + if (result < 0) + return result; + } + +#endif /* CONFIG_PNP */ + + if (nopnp) + { + result = driver_register(&wbsd_driver); + if (result < 0) + return result; + + wbsd_device = platform_device_register_simple(DRIVER_NAME, -1, + NULL, 0); + if (IS_ERR(wbsd_device)) + return PTR_ERR(wbsd_device); + } return 0; } static void __exit wbsd_drv_exit(void) { - platform_device_unregister(&wbsd_device); +#ifdef CONFIG_PNP + + if (!nopnp) + pnp_unregister_driver(&wbsd_pnp_driver); - driver_unregister(&wbsd_driver); +#endif /* CONFIG_PNP */ + + if (nopnp) + { + platform_device_unregister(wbsd_device); + + driver_unregister(&wbsd_driver); + } DBG("unloaded\n"); } module_init(wbsd_drv_init); module_exit(wbsd_drv_exit); +#ifdef CONFIG_PNP +module_param(nopnp, uint, 0444); +#endif module_param(io, uint, 0444); module_param(irq, uint, 0444); module_param(dma, int, 0444); @@ -1646,6 +1989,9 @@ MODULE_LICENSE("GPL"); MODULE_DESCRIPTION("Winbond W83L51xD SD/MMC card interface driver"); MODULE_VERSION(DRIVER_VERSION); +#ifdef CONFIG_PNP +MODULE_PARM_DESC(nopnp, "Scan for device instead of relying on PNP. (default 0)"); +#endif MODULE_PARM_DESC(io, "I/O base to allocate. Must be 8 byte aligned. (default 0x248)"); MODULE_PARM_DESC(irq, "IRQ to allocate. (default 6)"); MODULE_PARM_DESC(dma, "DMA channel to allocate. -1 for no DMA. (default 2)"); |