diff options
| author | Pavel Pisa <ppisa@pikron.com> | 2007-03-08 00:00:40 +0100 |
|---|---|---|
| committer | Russell King <rmk+kernel@arm.linux.org.uk> | 2007-03-12 16:49:37 +0000 |
| commit | 2cb3320b3fb788eb95afbfea8686f11bb14e30b0 (patch) | |
| tree | b0f737af20fa8cb6cbc3ba3309eb45da86b4d338 /drivers/mmc | |
| parent | b3c6b76ffb1a8c8d1f12e838a25c1a86f5316e2c (diff) | |
[ARM] 4256/1: i.MX/MX1 SDHC fix/workaround of SD card recognition problems
The SDHC controllers cannot process shorter transfers.
They has to be handled as longer ones, but it such case CRC
error is evaluated. There was a case in the code still,
where this error is not ignored as it should to be process
these transfers.
Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Diffstat (limited to 'drivers/mmc')
| -rw-r--r-- | drivers/mmc/imxmmc.c | 13 |
1 files changed, 12 insertions, 1 deletions
diff --git a/drivers/mmc/imxmmc.c b/drivers/mmc/imxmmc.c index b060d4bfba2..0de5c9e94e7 100644 --- a/drivers/mmc/imxmmc.c +++ b/drivers/mmc/imxmmc.c @@ -569,10 +569,12 @@ static int imxmci_cpu_driven_data(struct imxmci_host *host, unsigned int *pstat) if(host->dma_dir == DMA_FROM_DEVICE) { imxmci_busy_wait_for_status(host, &stat, - STATUS_APPL_BUFF_FF | STATUS_DATA_TRANS_DONE, + STATUS_APPL_BUFF_FF | STATUS_DATA_TRANS_DONE | + STATUS_TIME_OUT_READ, 50, "imxmci_cpu_driven_data read"); while((stat & (STATUS_APPL_BUFF_FF | STATUS_DATA_TRANS_DONE)) && + !(stat & STATUS_TIME_OUT_READ) && (host->data_cnt < 512)) { udelay(20); /* required for clocks < 8MHz*/ @@ -602,6 +604,12 @@ static int imxmci_cpu_driven_data(struct imxmci_host *host, unsigned int *pstat) if(host->dma_size & 0x1ff) stat &= ~STATUS_CRC_READ_ERR; + if(stat & STATUS_TIME_OUT_READ) { + dev_dbg(mmc_dev(host->mmc), "imxmci_cpu_driven_data read timeout STATUS = 0x%x\n", + stat); + trans_done = -1; + } + } else { imxmci_busy_wait_for_status(host, &stat, STATUS_APPL_BUFF_FE, @@ -709,6 +717,9 @@ static void imxmci_tasklet_fnc(unsigned long data) */ stat |= host->status_reg; + if(test_bit(IMXMCI_PEND_CPU_DATA_b, &host->pending_events)) + stat &= ~STATUS_CRC_READ_ERR; + if(test_bit(IMXMCI_PEND_WAIT_RESP_b, &host->pending_events)) { imxmci_busy_wait_for_status(host, &stat, STATUS_END_CMD_RESP | STATUS_ERR_MASK, |