diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2010-08-03 14:31:24 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2010-08-03 14:31:24 -0700 |
commit | be82ae0238b0453afcf4a76f0512b7dde34ba500 (patch) | |
tree | aaa3f5f11fd51fd73365ee1a2164aad9a03de060 /drivers/mmc | |
parent | 4b4fd27c0b5ec638a1f06ced9226fd95229dbbf0 (diff) | |
parent | 7b70c4275f28702b76b273c8534c38f8313812e9 (diff) |
Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (291 commits)
ARM: AMBA: Add pclk support to AMBA bus infrastructure
ARM: 6278/2: fix regression in RealView after the introduction of pclk
ARM: 6277/1: mach-shmobile: Allow users to select HZ, default to 128
ARM: 6276/1: mach-shmobile: remove duplicate NR_IRQS_LEGACY
ARM: 6246/1: mmci: support larger MMCIDATALENGTH register
ARM: 6245/1: mmci: enable hardware flow control on Ux500 variants
ARM: 6244/1: mmci: add variant data and default MCICLOCK support
ARM: 6243/1: mmci: pass power_mode to the translate_vdd callback
ARM: 6274/1: add global control registers definition header file for nuc900
mx2_camera: fix type of dma buffer virtual address pointer
mx2_camera: Add soc_camera support for i.MX25/i.MX27
arm/imx/gpio: add spinlock protection
ARM: Add support for the LPC32XX arch
ARM: LPC32XX: Arch config menu supoport and makefiles
ARM: LPC32XX: Phytec 3250 platform support
ARM: LPC32XX: Misc support functions
ARM: LPC32XX: Serial support code
ARM: LPC32XX: System suspend support
ARM: LPC32XX: GPIO, timer, and IRQ drivers
ARM: LPC32XX: Clock driver
...
Diffstat (limited to 'drivers/mmc')
-rw-r--r-- | drivers/mmc/host/mmci.c | 148 | ||||
-rw-r--r-- | drivers/mmc/host/mmci.h | 39 | ||||
-rw-r--r-- | drivers/mmc/host/mxcmmc.c | 48 |
3 files changed, 122 insertions, 113 deletions
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c index 2ed435bd4b6..840b301b567 100644 --- a/drivers/mmc/host/mmci.c +++ b/drivers/mmc/host/mmci.c @@ -26,7 +26,6 @@ #include <linux/amba/mmci.h> #include <linux/regulator/consumer.h> -#include <asm/cacheflush.h> #include <asm/div64.h> #include <asm/io.h> #include <asm/sizes.h> @@ -37,12 +36,39 @@ static unsigned int fmax = 515633; +/** + * struct variant_data - MMCI variant-specific quirks + * @clkreg: default value for MCICLOCK register + * @clkreg_enable: enable value for MMCICLOCK register + * @datalength_bits: number of bits in the MMCIDATALENGTH register + */ +struct variant_data { + unsigned int clkreg; + unsigned int clkreg_enable; + unsigned int datalength_bits; +}; + +static struct variant_data variant_arm = { + .datalength_bits = 16, +}; + +static struct variant_data variant_u300 = { + .clkreg_enable = 1 << 13, /* HWFCEN */ + .datalength_bits = 16, +}; + +static struct variant_data variant_ux500 = { + .clkreg = MCI_CLK_ENABLE, + .clkreg_enable = 1 << 14, /* HWFCEN */ + .datalength_bits = 24, +}; /* * This must be called with host->lock held */ static void mmci_set_clkreg(struct mmci_host *host, unsigned int desired) { - u32 clk = 0; + struct variant_data *variant = host->variant; + u32 clk = variant->clkreg; if (desired) { if (desired >= host->mclk) { @@ -54,8 +80,8 @@ static void mmci_set_clkreg(struct mmci_host *host, unsigned int desired) clk = 255; host->cclk = host->mclk / (2 * (clk + 1)); } - if (host->hw_designer == AMBA_VENDOR_ST) - clk |= MCI_ST_FCEN; /* Bug fix in ST IP block */ + + clk |= variant->clkreg_enable; clk |= MCI_CLK_ENABLE; /* This hasn't proven to be worthwhile */ /* clk |= MCI_CLK_PWRSAVE; */ @@ -98,6 +124,18 @@ static void mmci_stop_data(struct mmci_host *host) host->data = NULL; } +static void mmci_init_sg(struct mmci_host *host, struct mmc_data *data) +{ + unsigned int flags = SG_MITER_ATOMIC; + + if (data->flags & MMC_DATA_READ) + flags |= SG_MITER_TO_SG; + else + flags |= SG_MITER_FROM_SG; + + sg_miter_start(&host->sg_miter, data->sg, data->sg_len, flags); +} + static void mmci_start_data(struct mmci_host *host, struct mmc_data *data) { unsigned int datactrl, timeout, irqmask; @@ -109,7 +147,7 @@ static void mmci_start_data(struct mmci_host *host, struct mmc_data *data) data->blksz, data->blocks, data->flags); host->data = data; - host->size = data->blksz; + host->size = data->blksz * data->blocks; host->data_xfered = 0; mmci_init_sg(host, data); @@ -210,8 +248,17 @@ mmci_data_irq(struct mmci_host *host, struct mmc_data *data, * We hit an error condition. Ensure that any data * partially written to a page is properly coherent. */ - if (host->sg_len && data->flags & MMC_DATA_READ) - flush_dcache_page(sg_page(host->sg_ptr)); + if (data->flags & MMC_DATA_READ) { + struct sg_mapping_iter *sg_miter = &host->sg_miter; + unsigned long flags; + + local_irq_save(flags); + if (sg_miter_next(sg_miter)) { + flush_dcache_page(sg_miter->page); + sg_miter_stop(sg_miter); + } + local_irq_restore(flags); + } } if (status & MCI_DATAEND) { mmci_stop_data(host); @@ -314,15 +361,18 @@ static int mmci_pio_write(struct mmci_host *host, char *buffer, unsigned int rem static irqreturn_t mmci_pio_irq(int irq, void *dev_id) { struct mmci_host *host = dev_id; + struct sg_mapping_iter *sg_miter = &host->sg_miter; void __iomem *base = host->base; + unsigned long flags; u32 status; status = readl(base + MMCISTATUS); dev_dbg(mmc_dev(host->mmc), "irq1 (pio) %08x\n", status); + local_irq_save(flags); + do { - unsigned long flags; unsigned int remain, len; char *buffer; @@ -336,11 +386,11 @@ static irqreturn_t mmci_pio_irq(int irq, void *dev_id) if (!(status & (MCI_TXFIFOHALFEMPTY|MCI_RXDATAAVLBL))) break; - /* - * Map the current scatter buffer. - */ - buffer = mmci_kmap_atomic(host, &flags) + host->sg_off; - remain = host->sg_ptr->length - host->sg_off; + if (!sg_miter_next(sg_miter)) + break; + + buffer = sg_miter->addr; + remain = sg_miter->length; len = 0; if (status & MCI_RXACTIVE) @@ -348,31 +398,24 @@ static irqreturn_t mmci_pio_irq(int irq, void *dev_id) if (status & MCI_TXACTIVE) len = mmci_pio_write(host, buffer, remain, status); - /* - * Unmap the buffer. - */ - mmci_kunmap_atomic(host, buffer, &flags); + sg_miter->consumed = len; - host->sg_off += len; host->size -= len; remain -= len; if (remain) break; - /* - * If we were reading, and we have completed this - * page, ensure that the data cache is coherent. - */ if (status & MCI_RXACTIVE) - flush_dcache_page(sg_page(host->sg_ptr)); - - if (!mmci_next_sg(host)) - break; + flush_dcache_page(sg_miter->page); status = readl(base + MMCISTATUS); } while (1); + sg_miter_stop(sg_miter); + + local_irq_restore(flags); + /* * If we're nearing the end of the read, switch to * "any data available" mode. @@ -477,16 +520,9 @@ static void mmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) /* This implicitly enables the regulator */ mmc_regulator_set_ocr(host->vcc, ios->vdd); #endif - /* - * The translate_vdd function is not used if you have - * an external regulator, or your design is really weird. - * Using it would mean sending in power control BOTH using - * a regulator AND the 4 MMCIPWR bits. If we don't have - * a regulator, we might have some other platform specific - * power control behind this translate function. - */ - if (!host->vcc && host->plat->translate_vdd) - pwr |= host->plat->translate_vdd(mmc_dev(mmc), ios->vdd); + if (host->plat->vdd_handler) + pwr |= host->plat->vdd_handler(mmc_dev(mmc), ios->vdd, + ios->power_mode); /* The ST version does not have this, fall through to POWER_ON */ if (host->hw_designer != AMBA_VENDOR_ST) { pwr |= MCI_PWR_UP; @@ -555,21 +591,10 @@ static const struct mmc_host_ops mmci_ops = { .get_cd = mmci_get_cd, }; -static void mmci_check_status(unsigned long data) -{ - struct mmci_host *host = (struct mmci_host *)data; - unsigned int status = mmci_get_cd(host->mmc); - - if (status ^ host->oldstat) - mmc_detect_change(host->mmc, 0); - - host->oldstat = status; - mod_timer(&host->timer, jiffies + HZ); -} - static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id) { struct mmci_platform_data *plat = dev->dev.platform_data; + struct variant_data *variant = id->data; struct mmci_host *host; struct mmc_host *mmc; int ret; @@ -613,6 +638,7 @@ static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id) goto clk_free; host->plat = plat; + host->variant = variant; host->mclk = clk_get_rate(host->clk); /* * According to the spec, mclk is max 100 MHz, @@ -673,6 +699,7 @@ static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id) if (host->vcc == NULL) mmc->ocr_avail = plat->ocr_mask; mmc->caps = plat->capabilities; + mmc->caps |= MMC_CAP_NEEDS_POLL; /* * We can do SGIO @@ -681,10 +708,11 @@ static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id) mmc->max_phys_segs = NR_SG; /* - * Since we only have a 16-bit data length register, we must - * ensure that we don't exceed 2^16-1 bytes in a single request. + * Since only a certain number of bits are valid in the data length + * register, we must ensure that we don't exceed 2^num-1 bytes in a + * single request. */ - mmc->max_req_size = 65535; + mmc->max_req_size = (1 << variant->datalength_bits) - 1; /* * Set the maximum segment size. Since we aren't doing DMA @@ -738,7 +766,6 @@ static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id) writel(MCI_IRQENABLE, host->base + MMCIMASK0); amba_set_drvdata(dev, mmc); - host->oldstat = mmci_get_cd(host->mmc); mmc_add_host(mmc); @@ -746,12 +773,6 @@ static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id) mmc_hostname(mmc), amba_rev(dev), amba_config(dev), (unsigned long long)dev->res.start, dev->irq[0], dev->irq[1]); - init_timer(&host->timer); - host->timer.data = (unsigned long)host; - host->timer.function = mmci_check_status; - host->timer.expires = jiffies + HZ; - add_timer(&host->timer); - return 0; irq0_free: @@ -785,8 +806,6 @@ static int __devexit mmci_remove(struct amba_device *dev) if (mmc) { struct mmci_host *host = mmc_priv(mmc); - del_timer_sync(&host->timer); - mmc_remove_host(mmc); writel(0, host->base + MMCIMASK0); @@ -860,19 +879,28 @@ static struct amba_id mmci_ids[] = { { .id = 0x00041180, .mask = 0x000fffff, + .data = &variant_arm, }, { .id = 0x00041181, .mask = 0x000fffff, + .data = &variant_arm, }, /* ST Micro variants */ { .id = 0x00180180, .mask = 0x00ffffff, + .data = &variant_u300, }, { .id = 0x00280180, .mask = 0x00ffffff, + .data = &variant_u300, + }, + { + .id = 0x00480180, + .mask = 0x00ffffff, + .data = &variant_ux500, }, { 0, 0 }, }; diff --git a/drivers/mmc/host/mmci.h b/drivers/mmc/host/mmci.h index d77062e5e3a..68970cfb81e 100644 --- a/drivers/mmc/host/mmci.h +++ b/drivers/mmc/host/mmci.h @@ -28,8 +28,6 @@ #define MCI_4BIT_BUS (1 << 11) /* 8bit wide buses supported in ST Micro versions */ #define MCI_ST_8BIT_BUS (1 << 12) -/* HW flow control on the ST Micro version */ -#define MCI_ST_FCEN (1 << 13) #define MMCIARGUMENT 0x008 #define MMCICOMMAND 0x00c @@ -145,6 +143,7 @@ #define NR_SG 16 struct clk; +struct variant_data; struct mmci_host { void __iomem *base; @@ -164,6 +163,7 @@ struct mmci_host { unsigned int cclk; u32 pwr; struct mmci_platform_data *plat; + struct variant_data *variant; u8 hw_designer; u8 hw_revision:4; @@ -171,42 +171,9 @@ struct mmci_host { struct timer_list timer; unsigned int oldstat; - unsigned int sg_len; - /* pio stuff */ - struct scatterlist *sg_ptr; - unsigned int sg_off; + struct sg_mapping_iter sg_miter; unsigned int size; struct regulator *vcc; }; -static inline void mmci_init_sg(struct mmci_host *host, struct mmc_data *data) -{ - /* - * Ideally, we want the higher levels to pass us a scatter list. - */ - host->sg_len = data->sg_len; - host->sg_ptr = data->sg; - host->sg_off = 0; -} - -static inline int mmci_next_sg(struct mmci_host *host) -{ - host->sg_ptr++; - host->sg_off = 0; - return --host->sg_len; -} - -static inline char *mmci_kmap_atomic(struct mmci_host *host, unsigned long *flags) -{ - struct scatterlist *sg = host->sg_ptr; - - local_irq_save(*flags); - return kmap_atomic(sg_page(sg), KM_BIO_SRC_IRQ) + sg->offset; -} - -static inline void mmci_kunmap_atomic(struct mmci_host *host, void *buffer, unsigned long *flags) -{ - kunmap_atomic(buffer, KM_BIO_SRC_IRQ); - local_irq_restore(*flags); -} diff --git a/drivers/mmc/host/mxcmmc.c b/drivers/mmc/host/mxcmmc.c index d9d4a72e0ec..350f78e8624 100644 --- a/drivers/mmc/host/mxcmmc.c +++ b/drivers/mmc/host/mxcmmc.c @@ -119,6 +119,7 @@ struct mxcmci_host { int detect_irq; int dma; int do_dma; + int default_irq_mask; int use_sdio; unsigned int power_mode; struct imxmmc_platform_data *pdata; @@ -228,7 +229,7 @@ static int mxcmci_setup_data(struct mxcmci_host *host, struct mmc_data *data) static int mxcmci_start_cmd(struct mxcmci_host *host, struct mmc_command *cmd, unsigned int cmdat) { - u32 int_cntr; + u32 int_cntr = host->default_irq_mask; unsigned long flags; WARN_ON(host->cmd != NULL); @@ -275,7 +276,7 @@ static int mxcmci_start_cmd(struct mxcmci_host *host, struct mmc_command *cmd, static void mxcmci_finish_request(struct mxcmci_host *host, struct mmc_request *req) { - u32 int_cntr = 0; + u32 int_cntr = host->default_irq_mask; unsigned long flags; spin_lock_irqsave(&host->lock, flags); @@ -585,6 +586,9 @@ static irqreturn_t mxcmci_irq(int irq, void *devid) (stat & (STATUS_DATA_TRANS_DONE | STATUS_WRITE_OP_DONE))) mxcmci_data_done(host, stat); #endif + if (host->default_irq_mask && + (stat & (STATUS_CARD_INSERTION | STATUS_CARD_REMOVAL))) + mmc_detect_change(host->mmc, msecs_to_jiffies(200)); return IRQ_HANDLED; } @@ -809,6 +813,12 @@ static int mxcmci_probe(struct platform_device *pdev) else mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34; + if (host->pdata && host->pdata->dat3_card_detect) + host->default_irq_mask = + INT_CARD_INSERTION_EN | INT_CARD_REMOVAL_EN; + else + host->default_irq_mask = 0; + host->res = r; host->irq = irq; @@ -835,7 +845,7 @@ static int mxcmci_probe(struct platform_device *pdev) /* recommended in data sheet */ writew(0x2db4, host->base + MMC_REG_READ_TO); - writel(0, host->base + MMC_REG_INT_CNTR); + writel(host->default_irq_mask, host->base + MMC_REG_INT_CNTR); #ifdef HAS_DMA host->dma = imx_dma_request_by_prio(DRIVER_NAME, DMA_PRIO_LOW); @@ -926,43 +936,47 @@ static int mxcmci_remove(struct platform_device *pdev) } #ifdef CONFIG_PM -static int mxcmci_suspend(struct platform_device *dev, pm_message_t state) +static int mxcmci_suspend(struct device *dev) { - struct mmc_host *mmc = platform_get_drvdata(dev); + struct mmc_host *mmc = dev_get_drvdata(dev); + struct mxcmci_host *host = mmc_priv(mmc); int ret = 0; if (mmc) ret = mmc_suspend_host(mmc); + clk_disable(host->clk); return ret; } -static int mxcmci_resume(struct platform_device *dev) +static int mxcmci_resume(struct device *dev) { - struct mmc_host *mmc = platform_get_drvdata(dev); - struct mxcmci_host *host; + struct mmc_host *mmc = dev_get_drvdata(dev); + struct mxcmci_host *host = mmc_priv(mmc); int ret = 0; - if (mmc) { - host = mmc_priv(mmc); + clk_enable(host->clk); + if (mmc) ret = mmc_resume_host(mmc); - } return ret; } -#else -#define mxcmci_suspend NULL -#define mxcmci_resume NULL -#endif /* CONFIG_PM */ + +static const struct dev_pm_ops mxcmci_pm_ops = { + .suspend = mxcmci_suspend, + .resume = mxcmci_resume, +}; +#endif static struct platform_driver mxcmci_driver = { .probe = mxcmci_probe, .remove = mxcmci_remove, - .suspend = mxcmci_suspend, - .resume = mxcmci_resume, .driver = { .name = DRIVER_NAME, .owner = THIS_MODULE, +#ifdef CONFIG_PM + .pm = &mxcmci_pm_ops, +#endif } }; |